Bachelor of Engineering (Honours) (BENH) - BEng(Hons) · Bachelor of Engineering (Honours) (BENH) - BEng(Hons) ... Engineering Minor study: Mining Engineering (select 4 courses from

Bachelor of Engineering (Honours) (BENH) - BEng(Hons)QTAC code (Australian and New Zealand applicants): Toowoomba campus: 907332; External: 907335;Springfield campus: 927332

CRICOS code (International applicants): 079519E

ExternalOn-campus^#

Semester 1 (February)Semester 2 (July)

Semester 1 (February)Semester 2 (July)

Semester intake:

-Springfield, ToowoombaCampus:

Commonwealth supported placeCommonwealth supported placeFees:Domestic full fee paying placeDomestic full fee paying placeInternational full fee paying placeInternational full fee paying place

4 years full-time, 8 years part-timeStandard duration:

From: Associate Degree of Engineering; Bachelor of Engineering ScienceProgramarticulation:

FootnotesThe only majors available on-campus at USQ Springfield are Civil Engineering, Electrical and Electronic Engineering, Mechanical Engineeringand Mechatronic Engineering.

^

The Instrumentation Control and Automation Engineering major is only available via external study.#

Contact us

Current studentsFuture International studentsFuture Australian and NewZealand students

Ask a questionFreecall (within Australia): 1800007 252Phone (from outside Australia): +617 4631 2285Email [email protected]

Ask a questionPhone: +61 7 4631 5543Email: [email protected]

Ask a questionFreecall (within Australia): 1800269 500Phone (from outside Australia): +617 4631 5315Email: [email protected]

Professional accreditationA graduate of this program is eligible to apply for membership of Engineers Australia as a graduate ProfessionalEngineer. After further professional development, a graduate member with a Bachelor of Engineering (Honours)may apply for chartered status as a Professional Engineer and, when granted, may use the post-nominalMIEAust CPEng.

The Bachelor of Engineering (Honours) program is accredited by Engineers Australia and, through an agreementreached between the professional engineering bodies of other countries (the Washington Accord), is alsorecognised in those countries that are signatories to the Washington Accord.

Program aimsThe Bachelor of Engineering (Honours) provides students with the knowledge and skills that are necessaryto commence practice as a professional engineer; be eligible for graduate membership of Engineers Australia(as a Professional Engineer) and other appropriate professional bodies; and to undertake further advancedlevel studies in engineering. Specifically the program provides students with a core of basic generic andtechnical skills, common to all branches of engineering, and then permits students to undertake an in depthstudy of either agricultural, civil, computer systems, electrical and electronic, environmental, instrumentationcontrol and automation, mechanical, mechatronic or power engineering. In addition, students are equipped

This version produced 5 Nov 2020.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120811© University of Southern Queensland

Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2021)

./ADNG.pdf

./BENS.pdf

http://usqassist.custhelp.com/

mailto:[email protected]

http://usqstudy.custhelp.com/app/home


http://usqstudy.custhelp.com/cgi-bin/usqstudy.cfg/php/enduser/ask.php


http://www.usq.edu.au/handbook/current

with a knowledge of the industrial and social environments in which they will function as professional engineers.The program also seeks to instil in students a capacity to communicate effectively and adapt to change.

The Bachelor of Engineering (Honours) is primarily vocationally oriented. However, the program has beendesigned to identify students who have the capacity to undertake further study at an advanced level and tomake an original contribution to engineering knowledge.

Program objectivesOn completion of this program, students should be able to:

● Display coherent and comprehensive knowledge of historical, contemporary and emerging theories andconcepts that underpin relevant engineering disciplines.

● Recognise the social purpose of engineering and analyse the relationship between human-made productsand systems, and community needs.

● Apply well-researched, innovative, industry-relevant systems approaches to solve a range of engineeringproblems, and to address issues of sustainable practice in diverse environmental, technical and socialcontexts.

● Apply relevant project management skills and formulate design processes to enable the delivery ofengineering projects within given project constraints.

● Make appropriate autonomous judgements by critically evaluating evidence, identifying and analysingethical issues and applying cultural competencies, including those relevant to indigenous peoples.

● Communicate effectively in English and interpret information for diverse audiences using a range ofhigh-level oral, written and technology-based approaches; and apply effective competencies as a leader,team member and individual within the professional domain.

● Engage in lifelong learning through critical reflection, and be accountable for their personal and professionalactions by managing and monitoring personal performance.

Australian Qualifications FrameworkThe Australian Qualifications Framework (AQF) is a single national, comprehensive system of qualificationsoffered by higher education institutions (including universities), vocational education and training institutionsand secondary schools. Each AQF qualification has a set of descriptors which define the type and complexityof knowledge, skills and application of knowledge and skills that a graduate who has been awarded thatqualification has attained, and the typical volume of learning associated with that qualification type.

This program is at AQF Qualification Level 08. Graduates at this level will have advanced knowledge andskills for professional or highly skilled work and/or further learning.

The full set of levels criteria and qualification type descriptors can be found by visiting www.aqf.edu.au.

Program Information SetView USQ’s admission criteria, student profiles and a summary of all offers made under Course AdmissionInformation Set via the QTAC website.

Admission requirementsTo be eligible for admission, applicants must satisfy the following requirements:

● Have achieved a minimum Overall Position (OP) 12, tertiary entrance rank 75 or equivalent qualification.^

● Subject Pre-requisites: English (4,SA) and Mathematics B (4,SA) or equivalent.● English Language Proficiency requirements for Category 2.

Applicants are advised to also address the following:

● Recommended Prior Study: Physics (4,SA) or equivalent.



http://www.aqf.edu.au

http://www.qtac.edu.au/courses---institutions/universities--tafes---colleges/university-of-southern-queensland

http://www.qtac.edu.au/courses---institutions/universities--tafes---colleges/university-of-southern-queensland


All students are required to satisfy the applicable English language requirements.

If students do not meet the English language requirements they may apply to study a University-approvedEnglish language program. On successful completion of the English language program, students may beadmitted to an award program.

These are determined by the University for specific programs each Semester. The 2019 OP and tertiaryentrance ranks are based on agreed QTAC schedules which assess formal study at Year 12 or equivalent

^

level, tertiary, preparatory, professional or vocational qualifications or work experience, as detailed inthe QTAC Assessment of Qualifications Manual and QTAC Assessor Guidelines.

Special admissions may help you get into the program of your choice by increasing your Selection Rank.The additional points don't apply to all applicants or all programs. Please read the information aboutUSQ's Special Admissions carefully to find out what you may be eligible for.

Program fees

Commonwealth supported placeA Commonwealth supported place is where the Australian Government makes a contribution towards the costof a students' higher education and students pay a student contribution amount, which varies depending onthe courses undertaken. Students are able to calculate the fees for a particular course via the Course FeeFinder.

Commonwealth Supported students may be eligible to defer their fees through a Government loan calledHECS-HELP.

Domestic full fee paying placeDomestic full fee paying places are funded entirely through the full fees paid by the student. Full fees varydepending on the courses that are taken. Students are able to calculate the fees for a particular course via theCourse Fee Finder.

Domestic full fee paying students may be eligible to defer their fees through a Government loan called FEE-HELP provided they meet the residency and citizenship requirements.

Australian citizens, Permanent Humanitarian Visa holders, Permanent Resident visa holders and New Zealandcitizens who will be resident outside Australia for the duration of their program pay full tuition fees and arenot eligible for FEE-Help.

International full fee paying placeInternational students pay full fees. Full fees vary depending on the courses that are taken and whether theyare studied on-campus, via distance education/online. Students are able to calculate the fees for a particularcourse via the Course Fee Finder.

Program structureThe Bachelor of Engineering (Honours) is a 32-unit program consisting of Academic Courses and PracticeCourses. Students undertake a major of study, including approved courses which students are able to select.Students may choose to substitute four approved courses for a minor of four units in another area of study totheir major (except for Mechanical Engineering and Mechatronic Engineering). The available minors andassociated courses are listed in the minor studies section.

Academic courses are normally one-unit courses and involve approximately 155 hours of student work perunit.

Practice courses are zero unit courses and each involves approximately 50 hours of student work.

The following table shows the mandatory components of the program:

Practice CoursesAcademic CoursesProgramComponent UnitsNumber of CoursesUnitsNumber of Courses



http://policy.usq.edu.au/documents/14707PL

http://www.usq.edu.au/study/degrees/english-language-programs

https://www.usq.edu.au/study/international/apply/entry-requirements

https://www.usq.edu.au/study/international/apply/entry-requirements

https://www.usq.edu.au/study/getting-into-usq/special-admissions

https://www.usq.edu.au/current-students/administration/fees/help-loans

http://www.usq.edu.au/current-students/organise-enrolment/fees









041111Core Studies

04-5 depending uponthe major

2121 OR 17+4Major Study(including approvedcourses) OR MajorStudy plus MinorStudy

08–93232Total

Minor Studies

A minor study is a coherent group of four units of courses that provides students with an additional breadthof study in their program. Students who wish to take a minor study before undertaking any course shouldensure any pre-requisite courses are completed or exempted, enrolment requirements must be satisfied forany course selected.

Minor Study availableMajor study

YesAgricultural Engineering

YesCivil Engineering

YesComputer Systems Engineering

YesElectrical and Electronic Engineering

YesEnvironmental Engineering

YesInstrumentation Control and Automation Engineering

NoMechanical Engineering

NoMechatronic Engineering

YesPower Engineering

When students select a minor, courses will only count towards that minor if they have not already countedtowards another selected major. Not all minors are available on-campus at all campuses. Students undertakinga Minor study may choose courses from those listed in this section of the Handbook as follows:

Enrolmentrequirements

Online (ONL)External (EXT)Springfield(ONC)

Toowoomba(ONC)

Major: AllexceptMechanical orMechatronic

Minor Study – Management. Select the following course:

S2, S3S2S2, S3ENG4004EngineeringProject andOperationsManagement

select 3 other courses from the following list:

S1S1S1MGT2001 RiskMitigation, WorkHealth and Safety

S1MGT2007Leadership



http://www.usq.edu.au/course/synopses/2021/ENG4004.html





http://www.usq.edu.au/course/synopses/2021/MGT2001.html






S2MGT3004Creativity,Innovation andEntrepreneurship

S1S1S1MGT3005WorkforceDesign

S2, S3S2S2MGT3203 ProjectManagementProcesses



Toowoomba(ONC)

Major:AgriculturalEngineering

Minor study: Mechanical Engineering (select 4 courses from the following list):

S1S1S1MEC2202ManufacturingProcesses

S2S2S2MEC2406Introduction toMechatronics andAutomation

S1S1MEC3203MaterialsTechnology

S2S2MEC3303Mechanical andMechatronicSystem Design

S2S2MEC4406Robotics andMachine Vision



Toowoomba(ONC)

Major: CivilEngineering

Minor study: Mining Engineering (select 4 courses from the following list):

S1MIN2001 MiningTechnology andMineralProcessing

S2MIN2002 MinePlanning andDesign

S2MIN2003 MineOperations andManagement













http://www.usq.edu.au/course/synopses/2021/MEC2202.html

















http://www.usq.edu.au/course/synopses/2021/MIN2001.html











S1S2

MINADapproved coursetaken throughCentralQueenslandUniversity (CQU)viacross-institutionalenrolment.ENAR12004MineManagement andSafetyORENAR11001ResourceGeology



Toowoomba(ONC)

Major: CivilEngineering

Minor study: Transport Engineering (select the following 3 courses):

S2CIV5704 Roadand StreetEngineering

S1CIV5705Pavement Designand Analysis

S2S2URP4001MovementNetwork Planning

Select 1 of the following courses:

S2CIV3603ConstructionMethods

S1S1S1ENV2201 LandStudies



Toowoomba(ONC)

Majors:Agricultural orEnvironmentalEngineering

Minor study: Climatology (select the following 4 courses):

S1S1CLI1110 Weatherand Climate

S2S2CLI2201 ClimateChange andVariability



http://www.usq.edu.au/course/synopses/2021/CIV5704.html






http://www.usq.edu.au/course/synopses/2021/URP4001.html






http://www.usq.edu.au/course/synopses/2021/ENV2201.html


http://www.usq.edu.au/course/synopses/2021/CLI1110.html






S1S1CLI3301 Climateand EnvironmentRisk Assessment

S2S2CLI3302Adaptation toClimate Change



Toowoomba(ONC)

Majors:Environmentalor PowerEngineering

Minor study: Geographic Information Systems (select 4 courses from the following list):

S1, S3S11S1GIS1402GeographicInformationSystems

S2S2GIS3405 SpatialAnalysis andModelling

S2S2GIS3406 RemoteSensing andImage Processing

S1, S2, S3S1, S2S1, S2CSC1401FoundationProgramming

S1S1GIS3407 GISProgramming andVisualisation



Toowoomba(ONC)

Major: AllexceptMechanical orMechatronic

Minor Study – Data Management (Select 4 courses from the following list):#

S1, S3S1S1CIS2002Database DesignandImplementation

S2S2CIS3010 OracleDevelopment

S1, S2, S3S1, S2S1, S2CSC1401FoundationProgramming

S1S1S1CSC3400Database Systems









http://www.usq.edu.au/course/synopses/2021/GIS1402.html










http://www.usq.edu.au/course/synopses/2021/CSC1401.html






http://www.usq.edu.au/course/synopses/2021/CIS2002.html












S2S2CSC3501Principles of DataScience and

Visualisation*

S2S2CSC3502Principles of BigData

Management*

FootnotesIt is recommended that students who complete all three of CIS2002 Database Design and Implementation, CIS3010 Oracle Development andCSC3400 Database Systems, choose CSC3502 Principles of Big Data Management or CSC3501 Principles of Data Science and Visualisation.

#

Students are able to use ENG3104 Engineering Simulations and Computations to satisfy the Requisite Knowledge requirements of this course.*

Required time limitsStudents have a maximum of 10 years to complete this program.

Core coursesThe courses that comprise the core studies program are shown in the following table:

Semester(s) OfferedCourses

OnlineExternalSpringfieldToowoomba

Academic Courses

1,21,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications

1,211ENG1004 Engineering Problem Solving Principles

1,21,21,2ENG1100 Introduction to Engineering Design

1,2,31.21,2ENG2002 Technology, Sustainability and Society

1,311ENG3003 Engineering Management†

222ENG3104 Engineering Simulations and Computations

222ENG4110 Engineering Research Methodology

111ENG4111 Research Project Part 1

1,221,2ENG4112 Research Project Part 2

1,21,21,2ENM1600 Engineering Mathematics

111ENM2600 Advanced Engineering Mathematics

Practice Courses

2,311,2ENG1901 Engineering Practice 1

2ENG3902 Professional Practice 1

21ENG4903 Professional Practice 2

1,2,3ENG4909 Work Experience - Professional

FootnotesThe Semester 3 offering of this course is offered in odd numbered years only.†

Major studiesThe Bachelor of Engineering (Honours) consists of a core component and a series of major studies. All studentsmust complete the core courses and one of the major studies. The major study provides students with knowledgeand skills in a specific discipline. The major study areas in the USQ Bachelor of Engineering (Honours) are



























http://www.usq.edu.au/course/synopses/2021/ENM1600.html







listed below. The Instrumentation Control and Automation Engineering major is designed for processtechnologists in industry who wish to upgrade their qualifications. As such, the program will normally beundertaken by external study.

ExternalOn-Campus SpringfieldOn-Campus ToowoombaMajor

YesNoYesAgricultural Engineering

YesYesYesCivil Engineering

YesNoYesComputer SystemsEngineering

YesYesYesElectrical and ElectronicEngineering

YesNoYesEnvironmentalEngineering

YesNoNoInstrumentation Controland AutomationEngineering

YesYesYesMechanical Engineering

YesYesYesMechatronic Engineering

YesNoYesPower Engineering

Agricultural Engineering major courses



Academic Courses

22AGR2301 Agricultural Science

11AGR2302 Agricultural Machinery

11AGR3303 Agricultural Materials and Post-HarvestTechnologies

11AGR3304 Soil Science

22AGR3305 Precision and Smart Technologies inAgriculture

11AGR4305 Agricultural Soil Mechanics

2,322CIV1501 Engineering Statics

222CIV2403 Geology and Geomechanics

111ENV2103 Hydraulics I

111ENV3104 Hydraulics II

222ENV3105 Hydrology

22ENV4106 Irrigation Science

1,2,31,21,2MEC1201 Engineering Materials

222MEC2301 Design of Machine Elements

111MEC2401 Dynamics I

111MEC2402 Stress Analysis

222SVY1500 Spatial Science for Engineers



http://www.usq.edu.au/course/synopses/2021/AGR2301.html


















http://www.usq.edu.au/course/synopses/2021/SVY1500.html


Approved courses (x4)

Practice Courses

3AGR2902 Field Practice

2AGR3903 Soil and Water Engineering Practice 2

3AGR3905 Agricultural Engineering Practice

2,322CIV2901 Geology and Geomechanics Practice

1,2,322ENV2902 Hydraulics Practice

Civil Engineering major courses



Academic Courses



222CIV2503 Structural Design I

111CIV2605 Construction Engineering

222CIV3403 Geotechnical Engineering

111CIV3505 Structural Analysis

111CIV3506 Concrete Structures

222CIV3703 Transport Engineering

111CIV4508 Structural Design II




222ENV4203 Public Health Engineering




Approved course (x5)

Practice Courses


311CIV3906 Civil Materials Practice

3CIV3907 Civil Systems Practice

1,2CIV4908 Civil Design Practice


Computer Systems Engineering major courses
































Academic Courses

1,2,31,21,2CSC1401 Foundation Programming

22CSC2401 Algorithms and Data Structures

11CSC2402 Object-Oriented Programming in C++

1,21,21,2CSC2408 Software Development Tools

111ELE1301 Computer Engineering

111ELE1502 Electronic Circuits

2,322ELE1801 Electrical Technology

222ELE2103 Linear Systems and Control

111ELE2303 Embedded Systems Design

111ELE2601 Telecommunications Principles

111ELE3105 Computer Controlled Systems

222ELE3107 Signal Processing

111ELE3305 Computer Systems and CommunicationsProtocols

222ELE3307 Real Time Systems

111MAT1101 Discrete Mathematics for Computing

Approved Courses (x6)

Practice Courses

322ELE1911 Electrical and Electronic Practice A

311ELE2912 Electrical and Electronic Practice B

222ELE2913 Electrical and Electronic Practice C

31ELE3914 Electrical and Electronic Practice D

222ELE3915 Electrical and Electronic Practice E

Electrical and Electronic Engineering major courses



Academic Courses






222ELE2504 Electronic Design and Analysis



222ELE3107 Signal Processing








http://www.usq.edu.au/course/synopses/2021/ELE1301.html











http://www.usq.edu.au/course/synopses/2021/MAT1101.html



















222ELE3506 Electronic Measurement

111ELE3803 Electrical Plant

111ELE4605 Fields and Waves

222ELE4606 Communication Systems



Practice Courses






Environmental Engineering major courses



Academic Courses

11AGR3304 Soil Science




11ENV2105 Applied Chemistry and Microbiology

111ENV2201 Land Studies

22ENV3103 Environmental Pollution




22ENV4107 Water Resources Engineering


11ENV4204 Environmental Technology

1ENV4205 Water and Wastewater Treatment



Approved courses (x5)

Practice Courses

3AGR2902 Field Practice

2AGR3903 Soil and Water Engineering Practice 2





































3ENV3904 Environmental Engineering Practice

Instrumentation Control and Automation Engineering major courses



Academic Courses










1 (odd yearsonly)

ELE4109 Measurement Science and InstrumentEngineering

1ELE4506 Industrial Process Automation


222MEC2106 Introduction to Thermofluids

1MEC2501 Process Control Systems

111MEC3107 Thermofluids

111MEC4108 Advanced Thermofluids

222MEC4406 Robotics and Machine Vision


Practice Courses





2MEC3905 Mechatronic Practice

Mechanical Engineering major courses



Academic Courses

222CIV1501 Engineering Statics



































111MEC2202 Manufacturing Processes


222MEC2304 Solid Modelling



222MEC2406 Introduction to Mechatronics andAutomation

111MEC3107 Thermofluids

111MEC3203 Materials Technology

222MEC3204 Production Engineering

111MEC3302 Computational Mechanics in Design

222MEC3303 Mechanical and Mechatronic SystemDesign

222MEC3403 Dynamics II

222MEC4104 Renewable Energy Technology

111MEC4108 Advanced Thermofluids

Approved Course (x3)

Practice Courses

311MEC2901 Mechanical Practice 1




Mechatronic Engineering major courses



Academic Courses

222CIV1501 Engineering Statics



















































222MEC2406 Introduction to Mechatronics andAutomation


222MEC3303 Mechanical and Mechatronic SystemDesign



Approved Course (x1)

Practice Courses




2MEC3905 Mechatronic Practice

Power Engineering major courses



Academic Courses







22ELE2704 Electricity Supply Systems




1ELE3804 Power Systems Protection

222ELE3805 Power Electronics Principles andApplications

11ELE3807 Power Systems Analysis





Practice Courses









































Electives/Approved coursesAppropriate approved courses in each major are shown in the tables in the Recommended Enrolment Patternsection. The Program Coordinator may approve a variation in approved course studies where the student candemonstrate that there is a sound academic argument for the change. Arguments based on timetable difficulties,quota problems etc. will not normally be entertained. Note however that students who wish to enrol in a courseother than those listed must obtain the written approval of the Program Coordinator prior to enrolling in thecourse if they want the course to count as credit towards their award.

Students should note that quota restrictions may preclude their enrolment in particular approved courses asstudents enrolling in these courses as part of their core or major studies will be given enrolment priority.

Practical experienceTo be eligible to graduate from the Bachelor of Engineering (Honours), students must obtain an aggregate ofat least 60 days of suitable work experience during their program. This experience may be in an engineeringoffice or laboratory where the student would be working principally with professional engineers and engineeringassociates. It may, however, be preferable for students to spend some time in field or factory activities to gaininsight into industrial practice and to see what is involved in converting designs into finished products. Studentsare required to enrol in ENG4909 Work Experience - Professional in the latter part of their program and keepa record of appropriate experience as specified in the Course Specification. The work experience is to beendorsed by an appropriate person in the organisation providing the experience and submitted to the examiner.The student must meet all costs associated with the acquisition of work experience to satisfy this requirement.The record of work experience must be made available for perusal by the Faculty of Health, Engineering andSciences upon request. The acceptability or otherwise of employment experience, and the period of that typeof experience that may be credited towards the 60 days, will be determined by the Examiner of ENG4909Work Experience - Professional.

Credit or exemptions for ENG4909 Work Experience - Professional will not normally be considered.

IT requirementsStudents should visit the USQ minimum computing standards to check that their computers are capable ofrunning the appropriate software and versions of Internet web browsers and to check the minimum andrecommended standards for software.

Residential schoolsThe attendance requirement of residential schools within this degree is indicated by the following letters: V= Voluntary; O = Optional; C = Compulsory; R = Recommended; HR = Highly Recommended; M = Mandatory.To find out more about residential schools, visit the Residential School Schedule to view specific dates foryour degree, or visit the Policy and Procedure Library.

Students are required to undertake practical and professional activities relevant to their program throughenrolment in a series of Practice courses in the program. Practice courses are zero unit courses that may beundertaken in either on-campus or external mode and the final grades available are Pass (P)/Fail (F) only.They are a compulsory part of the program and do not attract a student contribution charge for Australianresidents or a tuition fee for international students. The recommended enrolment schedule for Practice coursesis shown in the Recommended Enrolment Pattern for the program in this Handbook.

External students must attend a number of residential schools during their program to obtain experience inpractical and professional activities appropriate to the program. The residential schools are included in Practice











https://www.usq.edu.au/current-students/academic/residential-schools

https://www.usq.edu.au/handbook/current/resschoolsched.html

https://policy.usq.edu.au/


courses which are conducted in Semester 3 or during the recess periods. The dates for each residential schoolPractice course are shown in the Residential School Schedule in this Handbook and external students shouldensure they are able to attend the residential school prior to enrolling in a Practice course. Personal protectiveequipment is compulsory in many engineering, construction and spatial science laboratories, students shouldconfirm the requirements before attending residential schools for Practice courses.

Students who enrol in on-campus mode for Practice courses normally undertake a series of weekly activitiesand/or attend a compulsory residential school.

ENG3902 Professional Practice 1 and ENG4110 Engineering Research Methodology are to be studied in thestudent's penultimate year. Upon completion of ENG3902 Professional Practice 1 and ENG4110 EngineeringResearch Methodology, students must study ENG4111 Research Project Part 1, ENG4112 Research ProjectPart 2 and ENG4903 Professional Practice 2 in the same academic year.

Agricultural Engineering

● ENG1901 Engineering Practice 1● CIV2901 Geology and Geomechanics Practice● ENV2902 Hydraulics Practice● AGR3903 Soil and Water Engineering Practice 2● AGR3905 Agricultural Engineering Practice● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2

Civil Engineering

● ENG1901 Engineering Practice 1● CIV2901 Geology and Geomechanics Practice● ENV2902 Hydraulics Practice● CIV3906 Civil Materials Practice● CIV3907 Civil Systems Practice● CIV4908 Civil Design Practice● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2

Computer Systems Engineering

● ENG1901 Engineering Practice 1● ELE1911 Electrical and Electronic Practice A● ELE2912 Electrical and Electronic Practice B● ELE2913 Electrical and Electronic Practice C● ELE3914 Electrical and Electronic Practice D● ELE3915 Electrical and Electronic Practice E● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2

Electrical and Electronic Engineering

● ENG1901 Engineering Practice 1● ELE1911 Electrical and Electronic Practice A● ELE2912 Electrical and Electronic Practice B● ELE2913 Electrical and Electronic Practice C● ELE3914 Electrical and Electronic Practice D● ELE3915 Electrical and Electronic Practice E● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2● CHE1110 Chemistry 1 (Elective)



http://www.usq.edu.au/handbook/current/resschoolsched.html









































http://www.usq.edu.au/course/synopses/2021/CHE1110.html


Environmental Engineering

● ENG1901 Engineering Practice 1● CIV2901 Geology and Geomechanics Practice● ENV2902 Hydraulics Practice● AGR2902 Field Practice● ENV3904 Environmental Engineering Practice● AGR3903 Soil and Water Engineering Practice 2● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2● CHE1110 Chemistry 1(Elective)● CHE2120 Chemistry 2 (Elective)

Instrumentation Control and Automation Engineering

● ENG1901 Engineering Practice 1● ELE1911 Electrical and Electronic Practice A● ELE2912 Electrical and Electronic Practice B● ELE2913 Electrical and Electronic Practice C● ELE3914 Electrical and Electronic Practice D● MEC3905 Mechatronic Practice● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2● CHE1110 Chemistry 1 (Elective)

Mechanical Engineering

● ENG1901 Engineering Practice 1● MEC2901 Mechanical Practice 1● MEC2902 Mechanical Practice 2● MEC3903 Mechanical Practice 3● MEC3904 Mechanical Practice 4● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2

Mechatronic Engineering

● ENG1901 Engineering Practice 1● ELE1911 Electrical and Electronic Practice A● MEC2901 Mechanical Practice 1● MEC2902 Mechanical Practice 2● MEC3905 Mechatronic Practice● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2

Power Engineering

● ENG1901 Engineering Practice 1● ELE1911 Electrical and Electronic Practice A● ELE2912 Electrical and Electronic Practice B● ELE2913 Electrical and Electronic Practice C● ELE3914 Electrical and Electronic Practice D● ELE3915 Electrical and Electronic Practice E● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2● CHE1110 Chemistry 1 (Elective)














































Related programsStudents may combine the Bachelor of Engineering (Honours) with a program from another area of study.Currently the following combined programs have been accredited by the University and Engineers Australia:

● Bachelor of Engineering (Honours) Bachelor of Business and Commerce● Bachelor of Engineering (Honours) Bachelor of Information Technology● Bachelor of Engineering (Honours) Bachelor of Science.

Exit pointsStudents who, for whatever reason, are unable to complete the Bachelor of Engineering (Honours) and whosatisfy all of the requirements of either the Bachelor of Engineering Science, the Associate Degree of Engineering or the Diploma of Engineering Studies may be permitted to exit with that award.

CreditExemptions/credit will be assessed based on the USQ Credit and Exemption Procedure.

Work Experience

Work and industrial experience that has not been formally assessed, does not normally qualify for coursecredit in the Bachelor of Engineering (Honours) program. Existing work experience may be used to satisfythe practical/work experience requirements when completing the ENG4909 Work Experience - Professionalpractice course.

HonoursThe level of honours awarded will be determined based on the USQ procedure. Please refer to the Class ofHonours Standard Schedule.

Agricultural Engineering major full-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.

To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should click on the courselink in the table below to ascertain if a course is offered in another term.

Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential

schoolYear of program and semester in which course

is normally studiedCourse

Online(ONL)

External(EXT)

On-campus(ONC)

SemYearSemYearSemYear

Academic Courses Year 1

1,211ENG1002 Introduction to Engineering and BuiltEnvironment Applications

1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles1,2,311MEC1201 Engineering Materials1,221ENG1100 Introduction to Engineering Design

Pre-requisite: ENG1500 orMAT1500 or ENM1600 or


(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN or GEPR

1,2,321ENG2002 Technology, Sustainability and Society



./BEBC.pdf

./BEHI.pdf

./BEHS.pdf

./BENS.pdf

./ADNG.pdf

./ADNG.pdf

http://www.usq.edu.au/extrafiles/handbook_pdf/DENS_exit point_2019.pdf

http://policy.usq.edu.au/documents.php?id=131190PL



















Online(ONL)

External(EXT)

On-campus(ONC)



Practice Courses Year 1

M2,311,21ENG1901 Engineering Practice 1


112AGR2302 Agricultural MachineryPre-requisite: ENM1600 orStudents must be enrolled in


one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCNPre-requisite: CIV1500 orCIV1501 or Students must be


enrolled in the following Program: GCEN or GEPRPre-requisite: CIV1501 or Students must be enrolled in


one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S


tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENS

222AGR2301 Agricultural SciencePre-requisite: CIV1501 orCIV1500 or Students must be


enrolled in one of the following Programs: MENS or GCEN or GEPRPre-requisite: MEC2402 orStudents must be enrolled in


one of the following Programs: MEPR or GCEN or GEPR


Pre-requisite or Co-requisite:ENG1901 and CIV2403

M2,322CIV2901 Geology and Geomechanics Practice

Pre-requisite or Co-requisite:ENV2103 or ENV1101

M1,2,322ENV2902 Hydraulics Practice

M3AGR2902 Field Practice^



113AGR3304 Soil SciencePre-requisite: ENV1101 orENV2103 or Students must


be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS





































Online(ONL)

External(EXT)

On-campus(ONC)


Pre-requisite: ((MAT1502 orMAT1102 or ENM1600) and


CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS or GEPR

223AGR3305 Precision and Smart Technologies in Agriculture223Approved Course (Select from minor or approved course

list)223ENV3105 Hydrology223ENG4110 Engineering Research Methodology


M2AGR3903 Soil and Water Engineering Practice 2M3AGR3905 Agricultural Engineering Practice

Pre-requisite: Students mustbe enrolled in one of the fol

M2ENG3902 Professional Practice 1

lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENS



114AGR4305 Agricultural Soil MechanicsPre-requisite: ENG3902 andENG4110 and Students must


be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH

114Approved Course (Select from minor or approved courselist)

Pre-requisite: AGR3304 orStudents must be enrolled in


one of the following Programs: GCEN or GCSC or GDSIor METC or MEPR or GCNSor GDNS orMENS orMSCN.


Pre-requisite: ENG4111 andStudents must be enrolled in


one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH





one of the following Program




























Online(ONL)

External(EXT)

On-campus(ONC)


s: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.


Select a minor study or approved courses from the following or other elective courses as approved bythe Program Coordinator

Pre-requisite: CIV2401 orCIV2403 or Students must be


enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS

11ELE1301 Computer Engineering32ELE2103 Linear Systems and Control2,32ENG4004 Engineering Project and Operations

Management‡

Pre-requisite: MEC2401 orELE2103 or Students must


be enrolled in one of the following Programs: MENS orGCEN

11ENV2201 Land StudiesPre-requisite: (ENV3104 andENV3105) or Students must


be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV1101 orENV2103 or Students must


be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV2105 orStudents must be enrolled in

11ENV4204 Environmental Technology@

one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS

1,31GIS1402 Geographic Information SystemsPre-requisite: MEC1201 orStudents must be enrolled in


one of the following Programs: MEPR or GCENPre-requisite: ENM160022MEC2406 Introduction to Mechatronics and AutomationPre-requisite: MEC1201 orStudents must be enrolled in


one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS


































Online(ONL)

External(EXT)

On-campus(ONC)


2CLI2201 Climate Change and VariabilityPre-requisite: MEC2301 orStudents must be enrolled in

22MEC3303 Mechanical and Mechatronic System Design


22BIO1100 Biology Concepts11REN1201 Environmental Studies

FootnotesThe residential school for this course may involve overnight field trips for which each student will be responsible for their own accommodationcosts.

^

The semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Program Coordinator.@

Agricultural Engineering major part-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.




Online(ONL)

External(EXT)

On-campus(ONC)


Year 1

1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications

1,21,2ENM1600 Engineering Mathematics1,21,2ENG1100 Introduction to Engineering Design




Year 1 Practice Courses


Year 2

1,21ENG1004 Engineering Problem Solving Principles1,2,31,2MEC1201 Engineering Materials1,2,31,2ENG2002 Technology, Sustainability and Society22SVY1500 Spatial Science for Engineers

Year 3

11AGR2302 Agricultural MachineryPre-requisite: ENM1600 orStudents must be enrolled in


one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCN

22AGR2301 Agricultural Science






http://www.usq.edu.au/course/synopses/2021/BIO1100.html

http://www.usq.edu.au/course/synopses/2021/REN1201.html






















Online(ONL)

External(EXT)

On-campus(ONC)


Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S





Year 4





one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: CIV1501 orCIV1500 or Students must be


enrolled in one of the following Programs: MENS or GCEN or GEPRPre-requisite: MEC2402 orStudents must be enrolled in








Year 5


11AGR3304 Soil ScienceApproved Course (Select from minor or approved courselist)

22AGR3305 Precision and Smart Technologies in Agriculture

Year 6

Pre-requisite: ENV1101 orENV2103 or Students must


be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and


CIV1501) or Students mustbe enrolled in one of the fol




































Online(ONL)

External(EXT)

On-campus(ONC)


lowing Programs: GCEN orGCNS or METC or MEPR orMENS or GEPR

22ENV3105 HydrologyApproved Course (Select from minor or approved courselist)


M2AGR3903 Soil and Water Engineering Practice 2M3AGR3905 Agricultural Engineering Practice

Year 7


11AGR4305 Agricultural Soil Mechanics22ENG4110 Engineering Research Methodology








Year 8

Pre-requisite: ENG3902 andENG4110 and Students must



Approved Course (Select from minor or approved courselist)








one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH or























Online(ONL)

External(EXT)

On-campus(ONC)


MENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.






11ELE1301 Computer Engineering32ELE2103 Linear Systems and Control2,32ENG4004 Engineering Project and Operations

Management‡






be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV1101 orENV2103 or Students must





1,31GIS1402 Geographic Information SystemsPre-requisite: MEC1201 orStudents must be enrolled in


one of the following Programs: MEPR or GCENPre-requisite: ENM160022MEC2406 Introduction to Mechatronics and AutomationPre-requisite: MEC1201 orStudents must be enrolled in



2CLI2201 Climate Change and VariabilityPre-requisite: MEC2301 orStudents must be enrolled in






































Online(ONL)

External(EXT)

On-campus(ONC)



22BIO1100 Biology Concepts11REN1201 Environmental Studies


^

The semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Program Coordinator.@

Civil Engineering major full-time recommended enrolment pattern (Toowoomba andSpringfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.


Approved courses are included in the list of Academic courses. Students should select these courses from theapproved courses listing.

Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential



Online(ONL)

External(EXT)

On-campus(ONC)




1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles1,2,311MEC1201 Engineering Materials1,221ENG1100 Introduction to Engineering Design




2,321ENG2002 Technology, Sustainability and Society221SVY1500 Spatial Science for Engineers




Pre-requisite: ENM1600 orStudents must be enrolled in





http://www.usq.edu.au/course/synopses/2021/BIO1100.html





















Online(ONL)

External(EXT)

On-campus(ONC)


s: GCEN or METC or MENSor GDNS or MEPR or MSCNPre-requisite: CIV1500 orCIV1501 or Students must be




one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR

112CIV2605 Construction Engineering122Approved Course (Select from minor or approved course

list)Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S


tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENSPre-requisite: CIV1501 orCIV1500 or Students must be


enrolled in one of the following Programs: MENS or GCEN or GEPRPre-requisite: (ENG1100 andMEC2402) or (ENG1100 and


CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPR









be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: MEC2402 and(MAT1502 or ENM1600 or


MAT1102) or Students mustbe enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS or GEPR



































Online(ONL)

External(EXT)

On-campus(ONC)


Pre-requisite: CIV2503 or Students must be enrolled in


one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS





223ENV3105 Hydrology223CIV3703 Transport Engineering223ENG4110 Engineering Research Methodology


Pre-requisite: MEC1201 andENG1901 or Students must

M313CIV3906 Civil Materials Practice

be enrolled in one of the following programs: ADCN orBCON or BCNHPre-requisite: CIV2503 or Students must be enrolled in

M33CIV3907 Civil Systems Practice

one of the following Programs: MENS or MEPRPre-requisite: Students mustbe enrolled in one of the fol




Pre-requisite: CIV3505 andCIV3506 or Students must be



114Approved Courses (Select from minor or approved courselist)








be enrolled in one of the fol





























Online(ONL)

External(EXT)

On-campus(ONC)


lowing Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENG4111 andStudents must be enrolled in





Co-requisite: CIV4508 or Students must be enrolled in the

M1,2CIV4908 Civil Design Practice

following Program: MEPR orMENSPre-requisite: ENG3902 andStudents must be enrolled in


one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.



11AGR3304 Soil Science2CIV3603 Construction Methods

Pre-requisite: CIV3506 or(MEC2402 and MEC3203)

1CIV4803 Mechanics and Technology of FibreComposites

2CIV5704 Road and Street EngineeringPre-requisite: CIV3703 or Students must be enrolled in

1CIV5705 Pavement Design and Analysis

one of the following Programs: GCNS or GDNS or MENSor PGCN or GCAE or MEPRPre-requisite: MEC3107 orMEC3102 or ENV3104 or S

1MEC5100 Computational Fluid Dynamics

tudents must be enrolled inthe following Program: MEPR

2,32ENG4004 Engineering Project and Operations

Management‡










































Online(ONL)

External(EXT)

On-campus(ONC)



1,31GIS1402 Geographic Information SystemsPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and


CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS or GEPRPre-requisite: SVY1102 orSVY1500 or Students must

22SVY1104 Survey Computations A

be enrolled in one of the following Programs: GCST orGDST or MSPT

22URP3201 Sustainable Urban Design and Development11URP1001 Introduction to Urban and Regional Planning

FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Program Coordinator.@

Civil Engineering major part-time recommended enrolment pattern (Toowoomba andSpringfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.




Online(ONL)

External(EXT)

On-campus(ONC)


Year 1


1,21,2ENM1600 Engineering Mathematics1,21,2ENG1100 Introduction to Engineering Design




Year 2

1,21ENG1004 Engineering Problem Solving Principles1,2,31,2MEC1201 Engineering Materials1,2,31,2ENG2002 Technology, Sustainability and Society22SVY1500 Spatial Science for Engineers





























Online(ONL)

External(EXT)

On-campus(ONC)




Year 3





enrolled in the following Program: GCEN or GEPR








Year 4




11CIV2605 Construction EngineeringPre-requisite: CIV1501 orCIV1500 or Students must be


enrolled in one of the following Programs: MENS or GCEN or GEPRPre-requisite: (ENG1100 andMEC2402) or (ENG1100 and


CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPR




Year 5




































Online(ONL)

External(EXT)

On-campus(ONC)


be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: MEC2402 and(MAT1502 or ENM1600 or


MAT1102) or Students mustbe enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS or GEPRPre-requisite: CIV2401 orCIV2403 or Students must be



22ENV3105 Hydrology


Pre-requisite: MEC1201 andENG1901 or Students must

31CIV3906 Civil Materials Practice

be enrolled in one of the following programs: ADCN orBCON or BCNH

Year 6





22CIV3703 Transport EngineeringApproved Course (Select from minor or approved courselist)



3CIV3907 Civil Systems Practice

one of the following Programs: MENS or MEPR

Year 7

Pre-requisite: CIV3505 andCIV3506 or Students must be




22ENG4110 Engineering Research MethodologyPre-requisite: ENV1101 orENV2103 or Students must































Online(ONL)

External(EXT)

On-campus(ONC)


lowing Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS





Year 8










Co-requisite: CIV4508 or Students must be enrolled in the

2CIV4908 Civil Design Practice

following Program: MEPR orMENSPre-requisite: ENG3902 andStudents must be enrolled in





11AGR3304 Soil Science2CIV3603 Construction Methods

Pre-requisite: CIV3506 or(MEC2402 and MEC3203)


2CIV5704 Road and Street EngineeringPre-requisite: CIV3703 or Students must be enrolled in

1CIV5705 Pavement Design and Analysis






























Online(ONL)

External(EXT)

On-campus(ONC)


one of the following Programs: GCNS or GDNS or MENSor PGCN or GCAE or MEPRPre-requisite: MEC3107 orMEC3102 or ENV3104 or S




Management‡






1,31GIS1402 Geographic Information SystemsPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and


CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS or GEPRPre-requisite: SVY1102 orSVY1500 or Students must

22SVY1104 Survey Computations A

be enrolled in one of the following Programs: GCST orGDST or MSPT

22URP3201 Sustainable Urban Design and Development11URP1001 Introduction to Urban and Regional Planning

FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Program Coordinator.@

Computer Systems Engineering major full-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.

To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external students


























for our Toowoomba campus. Students following a non-standard enrolment pattern should click on the courselink in the table below to ascertain if a course is offered in another term.

Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential



Online(ONL)

External(EXT)

On-campus(ONC)



1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles111ELE1301 Computer Engineering111ELE1502 Electronic Circuits1,221ENG1002 Introduction to Engineering and Built

Environment Applications1,2,321CSC1401 Foundation Programming



ENM1600 or Students mustbe enrolled in one of the following Programs: MEPR orGCEN or GEPR

1,221ENG1100 Introduction to Engineering Design


M2,31,21ENG1901 Engineering Practice 1M321ELE1911 Electrical and Electronic Practice A





112ELE2303 Embedded Systems DesignPre-requisite: CSC1401 orStudents must be enrolled in


one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTN

112MAT1101 Discrete Mathematics for Computing222ELE2103 Linear Systems and Control1,2,322ENG2002 Technology, Sustainability and Society






Pre-requisite: (ELE1301 andELE1502 and ELE1801) or

M312ELE2912 Electrical and Electronic Practice B

Students must be enrolled inone of the following Programs: GDNS or MENS



































Online(ONL)

External(EXT)

On-campus(ONC)



M222ELE2913 Electrical and Electronic Practice C



Pre-requisite: (ELE1502 andELE1801) or Students must


be enrolled in one of the following Programs: GCEN orMETC or GEPRPre-requisite: ELE2103 or Students must be enrolled in


one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCor GEPR


1,2,313Approved Course (Select from minor or approved courselist)

Pre-requisite: ELE1301 or Students must be enrolled in


one of the following Programs: GCEN or GCNS or METCor MENS or MEPR


223ELE3107 Signal Processing223ENG4110 Engineering Research Methodology



M313ELE3914 Electrical and Electronic Practice D

Students must be enrolled inone of the following Programs: MENS or MEPRPre-requisite: ELE1801 andELE1301 and ELE1502 or S

M223ELE3915 Electrical and Electronic Practice E

tudents must be enrolled inone of the following Programs: MENS or MEPRPre-requisite: Students mustbe enrolled in one of the fol





1,214CSC2408 Software Development Tools1,314ENG3003 Engineering Management†

































Online(ONL)

External(EXT)

On-campus(ONC)






Pre-requisite: CSC2402 orStudents must be enrolled in


one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPITPre-requisite: ENG4111 andStudents must be enrolled in



2,324Approved Course (Select from minor or approved courselist)







11CSC3400 Database SystemsPre-requisite: CSC2402 orenrolled in CSC2402 at the

11CSC3403 Comparative Programming Languages

same time as CSC3403 orStudents must be enrolled inone of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT

11CSC3407 Network Fundamentals and Routing11CSC3412 System and Security Administration22CSC3413 Network Design and Analysis


11CSC3420 Mobile Internet Technology

one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT





























Online(ONL)

External(EXT)

On-campus(ONC)



22CSC3427 Switching, Wireless and WAN Technologies

one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPITPre-requisite: ELE1502 or Students must be enrolled in


one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPRPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and


(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENSPre-requisite: ELE1801 or Students must be enrolled in


one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: (ELE2504 andELE2601) or Students must


be enrolled in one of the following Programs: GCEN orMETC or MEPR or MENS orGCNS or GDNSPre-requisite: ELE1301 or Students must be enrolled in

11ELE4607 Advanced Digital Communications

one of the following Programs: GCEN or METC or GCNSor GDNS or MENS or MEPRPre-requisite: ELE2601 or Students must be enrolled in

11ELE5001 Industrial Communications Protocols

the following Program: GCNS, GDNS, MENS or MEPR


Management‡



(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN or GEPRPre-requisite: ELE2103 or(MEC1501 and ELE2101 as


Co-requisite or Pre-requisite)or Students must be enrolledin the following Program:GEPRPre-requisite: MEC2401 orELE2103 or Students must






































FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡

Computer Systems Engineering major part-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.





Online(ONL)

External(EXT)

On-campus(ONC)


Year 1

1,21,2ENM1600 Engineering Mathematics1,21ENG1004 Engineering Problem Solving Principles11ELE1301 Computer Engineering11ELE1502 Electronic Circuits



Year 2


1,2,31,2CSC1401 Foundation ProgrammingPre-requisite: ENG1500 orMAT1500 or ENM1500 or



1,21,2ENG1100 Introduction to Engineering Design


M32ELE1911 Electrical and Electronic Practice A

Year 3




11ELE2303 Embedded Systems Design22ELE2103 Linear Systems and Control1,2,31,2ENG2002 Technology, Sustainability and Society

































Online(ONL)

External(EXT)

On-campus(ONC)


Year 4




11MAT1101 Discrete Mathematics for ComputingPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S








Year 5





one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCor GEPRPre-requisite: ELE1301 or Students must be enrolled in







Students must be enrolled inone of the following Programs: MENS or MEPR

Year 6

11ELE3305 Computer Systems and CommunicationsProtocolsApproved Course (Select from minor or approved courselist)






























Online(ONL)

External(EXT)

On-campus(ONC)


22ELE3107 Signal ProcessingApproved Course (Select from minor or approved courselist)


Pre-requisite: ELE1801 andELE1301 and ELE1502 or S


tudents must be enrolled inone of the following Programs: MENS or MEPR

Year 7

1,21,2CSC2408 Software Development ToolsApproved Course (Select from minor or approved courselist)

22ENG4110 Engineering Research MethodologyPre-requisite: CSC2402 orStudents must be enrolled in


one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT





Year 8












one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH or

























Online(ONL)

External(EXT)

On-campus(ONC)


MENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.



11CSC3400 Database SystemsPre-requisite: CSC2402 orenrolled in CSC2402 at the

11CSC3403 Comparative Programming Languages

same time as CSC3403 orStudents must be enrolled inone of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT

11CSC3407 Network Fundamentals and Routing11CSC3412 System and Security Administration22CSC3413 Network Design and Analysis


11CSC3420 Mobile Internet Technology

one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPITPre-requisite: CSC3407 orStudents must be enrolled in

22CSC3427 Switching, Wireless and WAN Technologies

one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPITPre-requisite: ELE1502 or Students must be enrolled in


one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPRPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and


(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENSPre-requisite: ELE1801 or Students must be enrolled in










































Online(ONL)

External(EXT)

On-campus(ONC)






Management‡



(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN or GEPRPre-requisite: ELE2103 or(MEC1501 and ELE2101 as


Co-requisite or Pre-requisite)or Students must be enrolledin the following Program:GEPRPre-requisite: MEC2401 orELE2103 or Students must



FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡

Electrical and Electronic Engineering major full-time recommended enrolment pattern(Toowoomba and Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.


Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential



Online(ONL)

External(EXT)

On-campus(ONC)




Environment Applications1,2,321MEC1201 Engineering Materials





























Online(ONL)

External(EXT)

On-campus(ONC)





1,221ENG1100 Introduction to Engineering Design







112ELE2303 Embedded Systems Design1,2,312ENG2002 Technology, Sustainability and Society



be enrolled in one of the following Programs: GCEN orMETC or GEPR

222ELE2103 Linear Systems and ControlPre-requisite: ELE1301 or Students must be enrolled in


one of the following Programs: GCEN or GCNS or METCor MENS or MEPRPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S


tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENSPre-requisite: ELE1502 or Students must be enrolled in


one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPR




Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1301 andELE1502 and ELE1801) or






































Online(ONL)

External(EXT)

On-campus(ONC)










one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCor GEPRPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and


(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENS


223ELE3107 Signal Processing223ENG4110 Engineering Research Methodology










Pre-requisite: {(MAT1502 orENM1600) and ELE2103 and


ELE2601} or Students mustbe enrolled in one of the following Programs: MEPR orMENS or GCNS or GDNS



































Online(ONL)

External(EXT)

On-campus(ONC)









be enrolled in one of the following Programs: GCEN orMETC or MEPR or MENS orGCNS or GDNSPre-requisite: ENG4111 andStudents must be enrolled in












one of the following Programs: MEPR or GCEN or METCor GEPRPre-requisite: ELE1801 or Students must be enrolled in



22ELE3805 Power Electronics Principles and Applications


11ELE3807 Power Systems Analysis





























Online(ONL)

External(EXT)

On-campus(ONC)


1ELE4109 Measurement Science and Instrument

Engineering*






1,21,2CSC1401 Foundation ProgrammingPre-requisite: CSC1401 orStudents must be enrolled in


one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTNPre-requisite: ENG1500 orMAT1500 or ENM1600 or


(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN or GEPRPre-requisite: CIV1500 orCIV1501 or Students must be


enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS or GEPRPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and


CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS or GEPRPre-requisite: CIV1501 or Students must be enrolled in


one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: ELE2103 or(MEC1501 and ELE2101 as


Co-requisite or Pre-requisite)or Students must be enrolledin the following Program:GEPR

22MEC3204 Production EngineeringPre-requisite: ((MEC2101andMEC3102) or MEC2106)


or Students must be enrolledin one of the following Programs: GCEN or GCNS or





































Online(ONL)

External(EXT)

On-campus(ONC)


GDNS or METC or MENS orMEPRPre-requisite: MEC2401 orELE2103 or Students must




Management‡

HR11CHE1110 Chemistry 1^

FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†Offered in odd years only e.g. 2021, 2023 etc*The semester 3 offering of this course is offered in even numbered years only.‡CHE1110 Chemistry 1 has a highly recommended residential school requirement in External mode.^

Electrical and Electronic Engineering major part-time recommended enrolment pattern(Toowoomba and Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.




Online(ONL)

External(EXT)

On-campus(ONC)


Year 1

1,21,2ENM1600 Engineering Mathematics1,21ENG1004 Engineering Problem Solving Principles1,21,2ENG1002 Introduction to Engineering and Built

Environment Applications1,2,31,2MEC1201 Engineering Materials



Year 2

11ELE1301 Computer Engineering11ELE1502 Electronic Circuits




1,21,2ENG1100 Introduction to Engineering Design



Year 3































Online(ONL)

External(EXT)

On-campus(ONC)



11ELE2303 Embedded Systems Design22ELE2103 Linear Systems and Control








Year 4

1,2,31,2ENG2002 Technology, Sustainability and SocietyPre-requisite: (ELE1502 andELE1801) or Students must


be enrolled in one of the following Programs: GCEN orMETC or GEPRPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S


tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENSPre-requisite: ELE1502 or Students must be enrolled in







Year 5





Pre-requisite: (ELE1502 and(ELE2101 or ELE2103) and


(ELE2503 or ELE2504)) orStudents must be enrolled in






































Online(ONL)

External(EXT)

On-campus(ONC)


one of the following Programs: GCEN or METC or MEPRor MENS






Year 6





22ELE3107 Signal Processing22Approved Course (Select from minor or approved course

list)





Year 7



ELE2601} or Students mustbe enrolled in one of the following Programs: MEPR orMENS or GCNS or GDNS


22ENG4110 Engineering Research MethodologyPre-requisite: (ELE2504 andELE2601) or Students must


be enrolled in one of the following Programs: GCEN orMETC or MEPR or MENS orGCNS or GDNS































Online(ONL)

External(EXT)

On-campus(ONC)


Year 8

















one of the following Programs: MEPR or GCEN or METCor GEPRPre-requisite: ELE1801 or Students must be enrolled in





11ELE3807 Power Systems Analysis1ELE4109 Measurement Science and Instrument

Engineering*

































Online(ONL)

External(EXT)

On-campus(ONC)


s: GCEN or METC or GCNSor GDNS or MENS or MEPRPre-requisite: ELE2601 or Students must be enrolled in





one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTNPre-requisite: ENG1500 orMAT1500 or ENM1600 or


(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN or GEPRPre-requisite: CIV1500 orCIV1501 or Students must be


enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS or GEPRPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and






Co-requisite or Pre-requisite)or Students must be enrolledin the following Program:GEPR



or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPRPre-requisite: MEC2401 orELE2103 or Students must






































Online(ONL)

External(EXT)

On-campus(ONC)



Management‡


FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†Offered in odd years only e.g. 2021, 2023 etc*The semester 3 offering of this course is offered in even numbered years only.‡CHE1110 Chemistry 1 has a highly recommended residential school requirement in External mode.^

Environmental Engineering major full-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.


Major study: Environmental Engineering (Major Study Code: 16926)Enrolment requirementsResidential



Online(ONL)

External(EXT)

On-campus(ONC)




1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles1,2,311MEC1201 Engineering Materials




1,221ENG1100 Introduction to Engineering Design2,321ENG2002 Technology, Sustainability and Society221SVY1500 Spatial Science for Engineers




112ENV2201 Land StudiesPre-requisite: ENM1600 orStudents must be enrolled in


































Online(ONL)

External(EXT)

On-campus(ONC)


112ENV2105 Applied Chemistry and Microbiology1,2,322Approved Course (Select from minor or approved course





enrolled in one of the following Programs: MENS or GCEN or GEPR









113AGR3304 Soil SciencePre-requisite: ENV1101 orENV2103 or Students must





Pre-requisite: ENV2105 andENV2103 or Students must


be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS or GEPR

223ENV3105 HydrologyPre-requisite: ENV1101 orENV2103 or Students must





M2AGR3903 Soil and Water Engineering Practice 2Pre-requisite: ENV4203 orStudents must be enrolled in

M3ENV3904 Environmental Engineering Practice



































Online(ONL)

External(EXT)

On-campus(ONC)


s: GDNS or MENS or MEPRor GEPRPre-requisite: Students mustbe enrolled in one of the fol




Pre-requisite: ENV2105 orStudents must be enrolled in






be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENHPre-requisite: ENV4203 andENV2105 or Students must


be enrolled in one of the following Programs: PDEV orGCEN or METC or MEPR orGCNS or GDNS or MENS




one of the following Programs: GCEN or GCSC or GDSIor METC or MEPR or GCNSor GDNS orMENS orMSCN.Pre-requisite: (ENV3104 andENV3105) or Students must


be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENG4111 andStudents must be enrolled in






one of the following Programs: BCNH or BCON or BEBB

























Online(ONL)

External(EXT)

On-campus(ONC)


or BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.



22AGR3305 Precision and Smart Technologies inAgriculture

11CLI1110 Weather and ClimateHR11CHE1110 Chemistry 1~

Pre-requisite: CHE1110HR22CHE2120 Chemistry 2~




22CIV3703 Transport Engineering1,2,31ECO1000 Economics2,32ENG4004 Engineering Project and Operations

Management‡

Pre-requisite: MEC3107 orMEC3102 or ENV3104 or S



1,31GIS1402 Geographic Information SystemsCo-requisite: LAW1101 orLAW1500 or ENG2002 or

11LAW2107 Environmental Law*

REN1201 or (Students enrolled in BEDU (Legal Studies) or BLAW or LLBP orBALW or BBLA or BCLA orBCLW & Co-requisiteLAW1201 or LAW1111) or(Students enrolled in DJUR& Co-requisite LAW5501 orLAW5111)Pre-requisite: MAT1102 orENM1600 or equivalent or

22MAT2200 Operations Research 1

approval from the examiner.Enrolment is not permitted inMAT2200 if MAT1200 hasbeen previously completed.

22URP3201 Sustainable Urban Design and Development11SVY3202 Photogrammetry and Remote Sensing11URP1001 Introduction to Urban and Regional Planning


^

The semester 3 offering of this course is offered in odd numbered years only.†CHE1110 and CHE2120 have a highly recommended residential school component in external mode.~The semester 3 offering of this course is offered in even numbered years only.‡















http://www.usq.edu.au/course/synopses/2021/ECO1000.html








http://www.usq.edu.au/course/synopses/2021/LAW1500.html
















On-campus mode at Springfield only.*

Environmental Engineering major part-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.




Online(ONL)

External(EXT)

On-campus(ONC)


Year 1


1,21,2ENM1600 Engineering Mathematics22SVY1500 Spatial Science for Engineers1,2,31,2MEC1201 Engineering Materials



Year 2

1,21,2ENG1100 Introduction to Engineering DesignPre-requisite: ENG1500 orMAT1500 or ENM1600 or



1,21ENG1004 Engineering Problem Solving Principles1,2,31,2ENG2002 Technology, Sustainability and Society

Year 3













Year 4

11ENV2105 Applied Chemistry and Microbiology11ENV2201 Land Studies



tudents must be enrolled in



































Online(ONL)

External(EXT)

On-campus(ONC)


one of the following Programs: GDET or METC or GDNSor MENS





Year 5




11AGR3304 Soil SciencePre-requisite: ENV2105 andENV2103 or Students must


be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS or GEPR

22ENV3105 Hydrology



Year 6











M3ENV3904 Environmental Engineering Practice

one of the following Programs: GDNS or MENS or MEPRor GEPR

Year 7





























Online(ONL)

External(EXT)

On-campus(ONC)


one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENSPre-requisite: (ENV3104 andENV3105) or Students must



22ENG4110 Engineering Research MethodologyPre-requisite: ENV4203 andENV2105 or Students must


be enrolled in one of the following Programs: PDEV orGCEN or METC or MEPR orGCNS or GDNS or MENS


M2AGR3903 Soil and Water Engineering Practice 2Pre-requisite: Students mustbe enrolled in one of the fol



Year 8







































Online(ONL)

External(EXT)

On-campus(ONC)



1,21,2AGR3305 Precision and Smart Technologies inAgriculture

11CLI1110 Weather and ClimateHR11CHE1110 Chemistry 1~

Pre-requisite: CHE1110HR22CHE2120 Chemistry 2~




22CIV3703 Transport Engineering1,2,31ECO1000 Economics2,32ENG4004 Engineering Project and Operations

Management‡

Pre-requisite: MEC3107 orMEC3102 or ENV3104 or S



1,31GIS1402 Geographic Information SystemsCo-requisite: LAW1101 orLAW1500 or ENG2002 or

11LAW2107 Environmental Law*

REN1201 or (Students enrolled in BEDU (Legal Studies) or BLAW or LLBP orBALW or BBLA or BCLA orBCLW & Co-requisiteLAW1201 or LAW1111) or(Students enrolled in DJUR& Co-requisite LAW5501 orLAW5111)Pre-requisite: MAT1102 orENM1600 or equivalent or

22MAT2200 Operations Research 1

approval from the examiner.Enrolment is not permitted inMAT2200 if MAT1200 hasbeen previously completed.

22URP3201 Sustainable Urban Design and Development11SVY3202 Photogrammetry and Remote Sensing11URP1001 Introduction to Urban and Regional Planning


^

The semester 3 offering of this course is offered in odd numbered years only.†CHE1110 and CHE2120 have a highly recommended residential school component in external mode.~The semester 3 offering of this course is offered in even numbered years only.‡On-campus mode at Springfield only.*












http://www.usq.edu.au/course/synopses/2021/ECO1000.html
























Instrumentation Control and Automation Engineering major full-time recommendedenrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.


Major study: Instrumentation Control and Automation Engineering (Major Study Code: 17741)Enrolment requirementsResidential



Online(ONL)

External(EXT)

On-campus(ONC)



1,21,2ENM1600 Engineering Mathematics1,21ENG1004 Engineering Problem Solving Principles11ELE1301 Computer Engineering11ELE1502 Electronic Circuits1,21,2ENG1002 Introduction to Engineering and Built

Environment Applications1,21,2ENG1100 Introduction to Engineering Design1,2,31,2MEC1201 Engineering Materials





M2,31,2ENG1901 Engineering Practice 1C32ELE1911 Electrical and Electronic Practice A





11ELE2303 Embedded Systems Design1,2,31,2ENG2002 Technology, Sustainability and Society11Approved Course (Select from minor or approved course




22ELE2103 Linear Systems and ControlPre-requisite: ELE1502 or Students must be enrolled in
































Online(ONL)

External(EXT)

On-campus(ONC)




enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS or GEPR








Pre-requisite: (MEC2106 andENM1600) or Students must

1515MEC3107 Thermofluids*

be enrolled in one of the following Programs: GCNS orGDNS or MENS Studentscannot enrol in MEC3107 ifthey have successfully completed, or are currently enrolled in, MEC2101 orMEC3102






Engineering>



one of the following Programs: GCEN or GCNS or METCor MENS or MEPRPre-requisite: ELE2103 or(MEC1501 and ELE2101 as


Co-requisite or Pre-requisite)or Students must be enrolledin the following Program:GEPRPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and










































Online(ONL)

External(EXT)

On-campus(ONC)







M2MEC3905 Mechatronic PracticePre-requisite: Students mustbe enrolled in one of the fol




Pre-requisite: (MEC3107 andENM2600 and ENG3104) or

11MEC4108 Advanced Thermofluids**

Students must be enrolled inthe following Program: MEPRStudents cannot enrol inMEC4108 if they have successfully completed, or arecurrently enrolled in,MEC3102 or MEC4103


Pre-requisite: (ELE2101 orELE2103) and ELE3105 and


MEC2501 or Students mustbe enrolled in the followingprogram: MENS or MEPRPre-requisite: ENG3902 andENG4110 and Students must


be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENHPre-requisite: MEC2401 orELE2103 or Students must






21,2ENG4112 Research Project Part 2



































Online(ONL)

External(EXT)

On-campus(ONC)












one of the following Programs: MEPR or GCEN or METCor GEPR

22ELE3107 Signal Processing11ELE3305 Computer Systems and Communications

ProtocolsPre-requisite: ELE1801 or Students must be enrolled in


one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: ELE1801 or Students must be enrolled in




be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: (ELE2504 andELE2601) or Students must




one of the following Programs: GCEN or METC or GCNSor GDNS or MENS or MEPR
































Online(ONL)

External(EXT)

On-campus(ONC)








2,32,3ENG4004 Engineering Project and Operations

Management‡



(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN or GEPRPre-requisite: MEC1201 orStudents must be enrolled in


one of the following Programs: MEPR or GCENPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and







or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPRPre-requisite: MEC3107 orMEC3102 or ENV3104 or S


tudents must be enrolled inthe following Program: MEPRPre-requisite: MEC3107 orMEC3102 or Students must

2MEC5105 Combustion>

be enrolled in the followingProgram: MEPR


FootnotesStudents should enrol in MEC3102 Fluid Mechanics (final offering S1 2021) instead of MEC3107 Thermofluids if they have completed thecourse MEC2101 .

*





































The semester 3 offering of this course is offered in odd numbered years only.†Offered Odd Years Only>MEC4108 Advanced Thermofluids will be offered for the first time in 2021. Students should enrol in MEC4103 Heat Transfer (final offeringS1 2022) instead of MEC4108 Advanced Thermofluids if they have completed the prerequisite course MEC3102 Fluid Mechanics.

**

The semester 3 offering of this course is offered in even numbered years only.‡CHE1110 Chemistry 1 has a highly recommended residential school requirement in External mode.^

Instrumentation Control and Automation Engineering major part-time recommendedenrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.





Online(ONL)

External(EXT)

On-campus(ONC)




1,211,21ENM1600 Engineering Mathematics1,211,21ENG1100 Introduction to Engineering Design1,2111ENG1004 Engineering Problem Solving Principles




1212ELE1301 Computer Engineering1212ELE1502 Electronic Circuits1,2,321,22MEC1201 Engineering Materials





C3222ELE1911 Electrical and Electronic Practice A





1313ELE2303 Embedded Systems DesignPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S



































Online(ONL)

External(EXT)

On-campus(ONC)







1,2,341,24ENG2002 Technology, Sustainability and Society1414Approved Course (Select from minor or approved course

list)Pre-requisite: ELE1502 or Students must be enrolled in


one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPRPre-requisite: CIV1500 orCIV1501 or Students must be










be enrolled in one of the following Programs: GCNS orGDNS or MENS Studentscannot enrol in MEC3107 ifthey have successfully completed, or are currently enrolled in, MEC2101 orMEC3102










































Online(ONL)

External(EXT)

On-campus(ONC)







Engineering>

Pre-requisite: ELE2103 or(MEC1501 and ELE2101 as


Co-requisite or Pre-requisite)or Students must be enrolledin the following Program:GEPRPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and




M26MEC3905 Mechatronic Practice






2727ENG4110 Engineering Research MethodologyPre-requisite: MEC2401 orELE2103 or Students must








Pre-requisite: (ELE2101 orELE2103) and ELE3105 and







































Online(ONL)

External(EXT)

On-campus(ONC)


MEC2501 or Students mustbe enrolled in the followingprogram: MENS or MEPRPre-requisite: ENG3902 andENG4110 and Students must


be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENHPre-requisite: ENG4111 andStudents must be enrolled in















22ELE3107 Signal Processing11ELE3305 Computer Systems and Communications

ProtocolsPre-requisite: ELE1801 or Students must be enrolled in


































Online(ONL)

External(EXT)

On-campus(ONC)




be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: (ELE2504 andELE2601) or Students must










2,32,3ENG4004 Engineering Project and Operations

Management‡



(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN or GEPRPre-requisite: MEC1201 orStudents must be enrolled in


one of the following Programs: MEPR or GCENPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and












































Online(ONL)

External(EXT)

On-campus(ONC)


or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPRPre-requisite: MEC3107 orMEC3102 or ENV3104 or S




be enrolled in the followingProgram: MEPR



*

The semester 3 offering of this course is offered in odd numbered years only.†Offered Odd Years Only>MEC4108 Advanced Thermofluids will be offered for the first time in 2021. Students should enrol in MEC4103 Heat Transfer (final offeringS1 2022) instead of MEC4108 Advanced Thermofluids if they have completed the prerequisite course MEC3102 Fluid Mechanics.

**

The semester 3 offering of this course is offered in even numbered years only.‡CHE1110 Chemistry 1 has a highly recommended residential school requirement in External mode.^

Mechanical Engineering major full-time recommended enrolment pattern (Toowoombaand Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.

To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should click on the link inthe table below to ascertain if a course is offered in another term.

Major study: Mechanical Engineering (Major Study Code: 16928)Enrolment requirementsResidential



Online(ONL)

External(EXT)

On-campus(ONC)


Year 1

Academic Courses


1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles1,211ENG1100 Introduction to Engineering Design

Practice Courses


Academic Courses

1,2,321MEC1201 Engineering MaterialsPre-requisite: ENM1600221MEC2406 Introduction to Mechatronics and Automation































Online(ONL)

External(EXT)

On-campus(ONC)






Year 2

Academic Courses

1,2,312ENG2002 Technology, Sustainability and SocietyPre-requisite: ENM1600 orStudents must be enrolled in


one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCNPre-requisite: CIV1501 or Students must be enrolled in


one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and



Practice Courses

M312MEC2901 Mechanical Practice 1M112MEC2902 Mechanical Practice 2

Academic Courses



tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENSPre-requisite: ENG1500 orMAT1500 or ENM1500 or


ENM1600 or Students mustbe enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: CIV1500 orCIV1501 or Students must be


enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS or GEPRPre-requisite: MEC2402 orStudents must be enrolled in



































Online(ONL)

External(EXT)

On-campus(ONC)



Year 3

Academic Courses

Pre-requisite: MEC1201 orStudents must be enrolled in


one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENSPre-requisite: MEC1201 orStudents must be enrolled in


one of the following Programs: MEPR or GCENPre-requisite: (MEC2106 andENM1600) or Students must


be enrolled in one of the following Programs: GCNS orGDNS or MENS Studentscannot enrol in MEC3107 ifthey have successfully completed, or are currently enrolled in, MEC2101 orMEC3102Pre-requisite: (MEC2304 andMEC2401 and MEC2402) or


Students must be enrolled inone of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS

223MEC3204 Production EngineeringPre-requisite: MEC2301 orStudents must be enrolled in


one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENSPre-requisite: (MEC2401 and(MAT2500 or ENM2600)) or


Students must be enrolled inone of the following Programs: GCEN or MEPR or GCNSor GDNS


Practice Courses

M323MEC3903 Mechanical Practice 3Pre-requisite: Students mustbe enrolled in one of the fol































Online(ONL)

External(EXT)

On-campus(ONC)


Year 4

Academic Courses








1,2,314Approved Course (Select from approved course list)

Practice Courses





Academic Courses

1,2,324Approved Course (Select from approved course list)Pre-requisite: ((MEC2101andMEC3102) or MEC2106)


or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPRPre-requisite: ENG4111 andStudents must be enrolled in



1,2,324Approved Courses (Select from approved course list)

Practice Courses

Pre-requisite: MEC3102 orMEC2106 or Students must

M224MEC3904 Mechanical Practice 4
































Online(ONL)

External(EXT)

On-campus(ONC)


lowing Programs: GDNS orMENS or MEPR

Select approved courses from the following or other elective courses as approved by the ProgramCoordinator



be enrolled in one of the following Programs: MENS orGCENPre-requisite: MEC3107 orMEC3102 or ENV3104 or S




be enrolled in the followingProgram: MEPRPre-requisite: (ENG1100 andMEC2402) or (ENG1100 and


CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPRPre-requisite: CIV3506 or(MEC2402 and MEC3203)


11ELE1502 Electronic Circuits22ELE2103 Linear Systems and Control11ELE2303 Embedded Systems Design



one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCor GEPRPre-requisite: ENV2105 orStudents must be enrolled in




Management‡


*

MEC4108 Advanced Thermofluids will be offered for the first time in 2021. Students should enrol in MEC4103 Heat Transfer (final offeringS1 2022) instead of MEC4108 Advanced Thermofluids if they have completed the prerequisite course MEC3102 Fluid Mechanics.

**

The semester 3 offering of this course is offered in odd numbered years only.†Offered Odd Years Only. Students who intend to take this course in Year 3 should enrol in MEC3204 Production Engineering in Year 4.>Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Program Coordinator.@The semester 3 offering of this course is offered in even numbered years only.‡








































Mechanical Engineering major part-time recommended enrolment pattern (Toowoombaand Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.




Online(ONL)

External(EXT)

On-campus(ONC)


Year 1

Academic Courses


1,21,2ENM1600 Engineering Mathematics1,2,31,2MEC1201 Engineering Materials

Pre-requisite: ENM160022MEC2406 Introduction to Mechatronics and Automation

Practice Courses


Year 2

Academic Courses

1,21ENG1004 Engineering Problem Solving Principles1,21,2ENG1100 Introduction to Engineering Design





Year 3

Academic Courses

1,2,31,2ENG2002 Technology, Sustainability and SocietyPre-requisite: ENM1600 orStudents must be enrolled in


one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCNPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S


tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENSPre-requisite: ENG1500 orMAT1500 or ENM1500 or



Practice Courses
































Online(ONL)

External(EXT)

On-campus(ONC)


Year 4

Academic Courses





CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS or GEPRPre-requisite: CIV1500 orCIV1501 or Students must be





Practice Courses


Year 5

Academic Courses



one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENSPre-requisite: MEC1201 orStudents must be enrolled in


one of the following Programs: MEPR or GCEN

22MEC3204 Production EngineeringPre-requisite: MEC2301 orStudents must be enrolled in



Practice Courses




























Online(ONL)

External(EXT)

On-campus(ONC)


Year 6

Academic Courses



be enrolled in one of the following Programs: GCNS orGDNS or MENS Studentscannot enrol in MEC3107 ifthey have successfully completed, or are currently enrolled in, MEC2101 orMEC3102Pre-requisite: (MEC2304 andMEC2401 and MEC2402) or


Students must be enrolled inone of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: (MEC2401 and(MAT2500 or ENM2600)) or




Practice Courses

Pre-requisite: MEC3102 orMEC2106 or Students must


be enrolled in one of the following Programs: GDNS orMENS or MEPR

Year 7

Academic Courses





Pre-requisite: ((MEC2101andMEC3102) or MEC2106)


or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPR



































Online(ONL)

External(EXT)

On-campus(ONC)


Practice Courses




Year 8

Academic Courses





Practice Courses


Academic Courses




1,2,32Approved Courses (Select from approved course list)

Practice Courses




Select approved courses from the following or other elective courses as approved by the ProgramCoordinator



be enrolled in one of the following Programs: MENS orGCENPre-requisite: MEC3107 orMEC3102 or ENV3104 or S































Online(ONL)

External(EXT)

On-campus(ONC)


be enrolled in the followingProgram: MEPRPre-requisite: (ENG1100 andMEC2402) or (ENG1100 and


CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPRPre-requisite: CIV3506 or(MEC2402 and MEC3203)


11ELE1502 Electronic Circuits22ELE2103 Linear Systems and Control11ELE2303 Embedded Systems Design



one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCor GEPRPre-requisite: ENV2105 orStudents must be enrolled in




Management‡


*

MEC4108 Advanced Thermofluids will be offered for the first time in 2021. Students should enrol in MEC4103 Heat Transfer (final offeringS1 2022) instead of MEC4108 Advanced Thermofluids if they have completed the prerequisite course MEC3102 Fluid Mechanics.

**

The semester 3 offering of this course is offered in odd numbered years only.†Offered Odd Years Only.>Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Program Coordinator.@The semester 3 offering of this course is offered in even numbered years only.‡

Mechatronic Engineering major full-time recommended enrolment pattern (Toowoombaand Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.

To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external students





























for our Toowoomba campus. Students following a non-standard enrolment pattern should click on the courselink in the table below to ascertain if a course is offered in another term.

Major study: Mechatronic Engineering (Major Study Code: 16929)Enrolment requirementsResidential



Online(ONL)

External(EXT)

On-campus(ONC)


Year 1

Academic Courses

1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles1,211ENG1100 Introduction to Engineering Design111ELE1301 Computer Engineering

Practice Courses


Academic Courses


Pre-requisite: ENM1600221MEC2406 Introduction to Mechatronics and AutomationPre-requisite: ENG1500 orMAT1500 or ENM1600 or




Year 2

Academic Courses

1,2,312MEC1201 Engineering MaterialsPre-requisite: ENM1600 orStudents must be enrolled in


one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCNPre-requisite: CIV1501 or Students must be enrolled in





Practice Courses

































Online(ONL)

External(EXT)

On-campus(ONC)


Academic Courses



ENM1600 or Students mustbe enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S


tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENSPre-requisite: MEC2402 orStudents must be enrolled in




Practice Courses


Year 3

Academic Courses

113ELE1502 Electronic Circuits1,2,313ENG2002 Technology, Sustainability and Society

Pre-requisite: (MEC2304 andMEC2401 and MEC2402) or



113ELE2303 Embedded Systems DesignPre-requisite: (MEC2401 and(MAT2500 or ENM2600)) or


Students must be enrolled inone of the following Programs: GCEN or MEPR or GCNSor GDNSPre-requisite: MEC2301 orStudents must be enrolled in


one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENSPre-requisite: ELE1502 or Students must be enrolled in




Practice Courses

M2MEC3905 Mechatronic Practice^

































Online(ONL)

External(EXT)

On-campus(ONC)





Year 4

Academic Courses



one of the following Programs: MEPR or GCENPre-requisite: ELE2103 or Students must be enrolled in







Practice Courses





Academic Courses

1,2,324Approved Course (Select from approved course list)Pre-requisite: (ELE1502 and(ELE2101 or ELE2103) and


(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENSPre-requisite: MEC2401 orELE2103 or Students must


be enrolled in one of the following Programs: MENS orGCENPre-requisite: ENG4111 andStudents must be enrolled in

































Online(ONL)

External(EXT)

On-campus(ONC)



Select one (1) approved course from the following or other elective course as approved by the ProgramCoordinator


Management‡










FootnotesOn-campus students should enrol in the external mode.^The Semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡

Mechatronic Engineering major part-time recommended enrolment pattern(Toowoomba and Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.




Online(ONL)

External(EXT)

On-campus(ONC)


Year 1

Academic Courses


Environment ApplicationsPre-requisite: ENM160022MEC2406 Introduction to Mechatronics and Automation


























Online(ONL)

External(EXT)

On-campus(ONC)


Year 2

Academic Courses

1,21,2ENG1100 Introduction to Engineering Design11ELE1301 Computer Engineering





Practice Courses


Year 3

Academic Courses

1,2,31,2MEC1201 Engineering MaterialsPre-requisite: ENM1600 orStudents must be enrolled in


one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCNPre-requisite: ENG1500 orMAT1500 or ENM1500 or


ENM1600 or Students mustbe enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S



Year 4

Academic Courses





CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS or GEPRPre-requisite: MEC2402 orStudents must be enrolled in

































Online(ONL)

External(EXT)

On-campus(ONC)




Practice Courses



Year 5

Academic Courses

11ELE1502 Electronic Circuits1,2,31,2ENG2002 Technology, Sustainability and Society

Pre-requisite: (MEC2401 and(MAT2500 or ENM2600)) or


Students must be enrolled inone of the following Programs: GCEN or MEPR or GCNSor GDNSPre-requisite: MEC2301 orStudents must be enrolled in



Year 6

Pre-requisite: (MEC2304 andMEC2401 and MEC2402) or



11ELE2303 Embedded Systems DesignPre-requisite: ELE1502 or Students must be enrolled in



Approved Course (Select from approved course list)

Practice Courses

M2MEC3905 Mechatronic Practice^

Year 7

Academic Courses



one of the following Programs: MEPR or GCENPre-requisite: ELE2103 or Students must be enrolled in


one of the following Programs: GCNS or GCEN or GDNS






























Online(ONL)

External(EXT)

On-campus(ONC)


or MEPR or MENS or METCor GEPRPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and




Practice Courses




Year 8

Academic Courses





Practice Courses


Academic Courses



be enrolled in one of the following Programs: MENS orGCENPre-requisite: ENG4111 andStudents must be enrolled in



Practice Courses
































Online(ONL)

External(EXT)

On-campus(ONC)


Select one (1) approved course from the following or other elective course as approved by the ProgramCoordinator


Management‡










FootnotesOn-campus students should enrol in the external mode.^The Semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡

Power Engineering major full-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.

To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus.

Major study: Power Engineering (Major Study Code:16930)Enrolment requirementsResidential



Online(ONL)

External(EXT)

On-campus(ONC)




Environment Applications1,221ENG1100 Introduction to Engineering Design



























Online(ONL)

External(EXT)

On-campus(ONC)





1,2,321MEC1201 Engineering Materials







112ELE2303 Embedded Systems Design1,2,312ENG2002 Technology, Sustainability and Society112Approved Course (Select from minor or approved course

list)Pre-requisite: ELE1502 or Students must be enrolled in



222ELE2103 Linear Systems and ControlPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S

















































Online(ONL)

External(EXT)

On-campus(ONC)






















114ELE3807 Power Systems AnalysisPre-requisite: ELE1801 or Students must be enrolled in


one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: ENG3902 andENG4110 and Students must


be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC or































Online(ONL)

External(EXT)

On-campus(ONC)


BEHB or BEHI or BEHS orBENG or BENH




one of the following Programs: MEPR or GCEN or METCor GEPRPre-requisite: ((MEC2101andMEC3102) or MEC2106)


or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPRPre-requisite: ENG4111 andStudents must be enrolled in













22ELE3107 Signal ProcessingPre-requisite: ELE1301 or Students must be enrolled in


one of the following Programs: GCEN or GCNS or METCor MENS or MEPRPre-requisite: (ELE2101 orELE2103) and ELE3105 and


MEC2501 or Students mustbe enrolled in the followingprogram: MENS or MEPR






























Online(ONL)

External(EXT)

On-campus(ONC)




ELE2601} or Students mustbe enrolled in one of the following Programs: MEPR orMENS or GCNS or GDNSPre-requisite: ELE2601 or Students must be enrolled in


the following Program: GCNS, GDNS, MENS or MEPRPre-requisite: CIV1501 orCIV1500 or Students must be



11CIV2605 Construction Engineering22GIS1401 Geographic Data Presentation1,31GIS1402 Geographic Information Systems2,32ENG4004 Engineering Project and Operations

Management#



(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN or GEPRPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and






Co-requisite or Pre-requisite)or Students must be enrolledin the following Program:GEPRPre-requisite: (MEC2401 and(MAT2500 or ENM2600)) or




FootnotesThe Semester 3 offering of this course is offered in odd numbered years only.†The Semester 3 offering of this course is offered in even numbered years only.#CHE1110 Chemistry 1 has a highly recommended residential school requirement in External mode.^





































Power Engineering major part-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.




Online(ONL)

External(EXT)

On-campus(ONC)


Year 1


Environment Applications1,21,2ENG1100 Introduction to Engineering Design



Year 2

11ELE1301 Computer Engineering11ELE1502 Electronic Circuits




1,2,31,2MEC1201 Engineering Materials



Year 3




11ELE2303 Embedded Systems DesignPre-requisite: ELE1502 or Students must be enrolled in








Year 4

1,2,31,2ENG2002 Technology, Sustainability and SocietyApproved Course (Select from minor or approved courselist)































Online(ONL)

External(EXT)

On-campus(ONC)











Year 5





one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCor GEPRPre-requisite: (ELE1502 andELE1801) or Students must








Year 6






































Online(ONL)

External(EXT)

On-campus(ONC)







Year 7

11ELE3807 Power Systems AnalysisPre-requisite: ELE1801 or Students must be enrolled in



22ENG4110 Engineering Research MethodologyPre-requisite: ((MEC2101andMEC3102) or MEC2106)







Year 8





































Online(ONL)

External(EXT)

On-campus(ONC)








22ELE3107 Signal ProcessingPre-requisite: ELE1301 or Students must be enrolled in


one of the following Programs: GCEN or GCNS or METCor MENS or MEPRPre-requisite: (ELE2101 orELE2103) and ELE3105 and


MEC2501 or Students mustbe enrolled in the followingprogram: MENS or MEPRPre-requisite: {(MAT1502 orENM1600) and ELE2103 and


ELE2601} or Students mustbe enrolled in one of the following Programs: MEPR orMENS or GCNS or GDNSPre-requisite: ELE2601 or Students must be enrolled in


the following Program: GCNS, GDNS, MENS or MEPRPre-requisite: CIV1501 orCIV1500 or Students must be



11CIV2605 Construction Engineering22GIS1401 Geographic Data Presentation1,31GIS1402 Geographic Information Systems2,32ENG4004 Engineering Project and Operations

Management#



(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN or GEPRPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and


CIV1501) or Students must











































Online(ONL)

External(EXT)

On-campus(ONC)


be enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS or GEPRPre-requisite: CIV1501 or Students must be enrolled in




Co-requisite or Pre-requisite)or Students must be enrolledin the following Program:GEPRPre-requisite: (MEC2401 and(MAT2500 or ENM2600)) or




FootnotesThe Semester 3 offering of this course is offered in odd numbered years only.†The Semester 3 offering of this course is offered in even numbered years only.#CHE1110 Chemistry 1 has a highly recommended residential school requirement in External mode.^















Documents

Bachelor of Engineering (Honours) (BENH) - BEng(Hons) · Bachelor of Engineering (Honours) (BENH) - BEng(Hons) ... Engineering Minor study: Mining Engineering (select 4 courses from