Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
50 Watts RMS into 8 ohms, capable of driving into 4 ohms•
Four separate amplifiers and preamplifiers, providing 4 zones of independent •yet integrated control
Combined with optional keypads, can be used as stand-alone•
Six full presets allow extensive whole-house control•
Provides up to 32 zones of control•
RS-232 and IR control•
Zone linking capabilities•
Seven stereo Sources (S1-S7), and an eighth mono source (S8)•
Optional 7W x 7W amplifier available for pre-amps•
8 x 4 composite video matrix switch can alternatively be used for digital coax •audio
Many more features for integration and control•
Available in two models, the 451AV (120 Volts AC) and the 452AV (230 Volts •AC)
The Vantage Controls Axium 450 Series multi-room amplifier
is one of the most advanced, dedicated multi-room amplifiers
on the market. Each 450 Series has independent or linked
volume control on each of four amplifier/pre-amplifier pairs.
The 450 Series multi-zone amplifiers may be interconnected
via the expansion bus, providing up to 32 zones, which vastly
simplifies installation cabling.
The 450 Series, like other Vantage products, is designed
to maximize control, simplify functionality, and expedite
installation. The amplifiers are protected against short-term
output shorts and have three progressive levels of thermal
protection. Vantage products are built to the highest standards
of quality and reliability.
Product Highlights
Audio & Video
Axium 450 SEriES
Axium 450 Series
rEV 0
SIDE VIEWBACK VIEWFRONT VIEW
15.375”
5.5”A muix 451AV
ZONES
08:40 Zone 1On | Vol 40 | S1» ë
17.125”
POWER CONSUMPTION 4.0A
Specifications
17.125” x 5.5” x 15.375”
435mm x 140mm x 390mm
Models AXIUM 451AV / 452AV
Weight 29.8 lbs (13.5kg)
Power Supply AC 120 V, 60Hz (451AV); AC 230 V, 50Hz (452AV)
Power Consumption 4A (451AV); 2A (452AV)
Standby Consumption 21.4W
Damping Power 60
Frequency Response 30Hz - 50KHz / +1dB - 3dB (8W)
Input Sensitivity and Impedance (S1-S7 L/R & S8 mono) 0.72 V / 22KW (unbalanced)
Preamplifier Output Level and Impedance (Z1-Z4 L/R) +16dB / 680W
Rated Output Power 50 watts minimum continuous power / channel, 8 ohm loads
capable of driving 4 ohm loads (2 zones per amplifier)
2 channels driven @ 1KHz, with a maximum harmonic distortion of 0.05%
Signal to Noise Ratio 92dB (IHA-A, 1V input / unbalanced)
Speaker Impedance (Z1-Z4 L/R) 6W - 16W
THD (Total Harmonic Distortion) 0.05% (Rated Power)
Tone Control ± 10dB, 100Hz (Base) ; ± 10dB, 10KHz (Treble)
Buffered Video Output Level and Impedance (S1-S8) 1 Vp-p / 75W (composite)
Input Level & Impedance (S1-S8) 1 Vp-p / 75W (composite)
Output Level & Impedance (Z1-Z4) 1 Vp-p / 75W (composite)
12V DC 1 Amp Power Two DC power sockets, Center positive (2.1mm pin diameter)
Amp On Control One: 7 way terminal plug with Amp ON 1-4 and #
One Page Preset Contact Closure Input - PG
Controller Two: 4-way terminal blocks (0V, IR, 12V & Data)
Expansion Bus Input & Output - 34 way 0.1” Double Row Header
IR Output A, B, IR1, IR2 - 3.5mm phone Jack
RS232 One DB9 - 9600 Baud
USB One: USB mini-B 5-pin
•7x7WAmplifier(AX-07S) •IREmitterExpander(AX-EX4) •RackMountEars(AX-RACKMOUNT)
•IRReceiver(AX-IRFX) •AudioKeypad(AX-KPB) •ExpansionBusCable(AX-EXCABLE)
•Plasmafriendly
General Specifications
Amplifier Specifications
Video Specifications
Interface Specifications
Optional Accessories
Dimensions, HWD
InFusion
QLink
System Compatibility
1061 South 800 East Orem, utah 84097 800.555.9891 801.224.0355 fax www.vantagecontrols.com