– E6961A Automotive Ethernet Tx Compliance Solution

– E6960A 1000Base-T1 Tx Compliance Application

– N6467B BroadR-Reach Compliance Application

– N8847A BroadR-Reach Protocol Trigger & Decode

– E6964A BroadR-Reach MDI S-parameter Application

– E6962A Automotive Ethernet Rx Compliance Solution

– E6963A Automotive Ethernet Link Segment Compliance Solution

All compliance and protocol application are compliant to BroadR-Reach V3.2 as well as 100Base-T1(IEEE 802.3bw) or 1000Base-T1 (IEEE 802.3bp) respectively.

Keysight TechnologiesAutomotive Ethernet Solutions

02 | Keysight | Automotive Ethernet Solutions - Brochure

www.keysight.com/find/automotive-ethernet

Automotive Ethernet-Driving the Future

Automotive Ethernet uses an Ethernet-based network for connections between in-vehicle electronic systems. Automotive Ethernet enables faster data communication to meet the demands of today’s vehicles and the connected cars of the future. Ethernet technology as an auto connectivity standard helps cut production costs and reduces design complexity by providing a centralized, high-performance communication network.

Connected Car

Automotive electronics are increasingly complex with more sensors, controls, and interfaces using higher bandwidth, which requires faster data throughput and more reliable networks.

The different sub-systems in a vehicle need to communicate with one another. The complexity, cost, and weight of wiring harnesses has increased so rapidly that today, wiring is the third most expensive and third heaviest component in a car!

Currently, different manufacturers use their own unique proprietary standards for automotive communication, with each component typically using a dedicated wire or cable. Ethernet networks allow the use of a single connectivity standard across all manufacturers and improves communication between car components.

The Connected Car

The cloudData services, reporting

and tracking

Climate controlsystems

Power seat control

Anti-lock braking

Tire pressuremonitoring

PODS for air bagsystems

eCalls

Hands-freetelephony

GPS

Powertrain &engine management(MiL, SiL, HiL)

Rear-view camera

Backup sensors

77, 79 GHz

Collision avoidance

LTE-v

DSCR

Ethernet

Ethernet Ethernet Ethernet Ethernet Ethernet

Secure cloudaccess gateway

Body/comfortsystems

LIN

Chassis/safetysystems

CAN/CAN FD/FlexRay

Infotainmentsystems

USB

Powertrainsystems

CAN/CAN FD/FlexRay

Camera (ADAS)systems

Automotiveradar

V2Vcommunication

03 | Keysight | Automotive Ethernet Solutions - Brochure

www.keysight.com/find/automotive-ethernet

Ethernet has already proven itself as a secure transfer medium that can handle large amounts of data as well as reduce connectivity costs and cabling weight.

BroadR-Reach, developed by Broadcom Corporation, is an Ethernet physical layer standard designed for use in automotive connectivity applications. IEEE standardized the technology with 802.3bw (100Base-T1) expanded to add 802.3bp (1000Base-T1) and now OPEN (One Pair EtherNet) Alliance maintains the automotive Ethernet standards.

The challengeEach sub-system working in the car ecosystem is an important component in automotive communication, involving multilayer design, engineering, and test teams. Ethernet allows each team to understand the communication between all of these subsystems and integrate them into a high-performance network.

The tests and test setup to validate BroadR-Reach, 100Base-T1, and 1000Base-T1 specifications for physical media attachment (PMA), physical layer solutions (PHY), and physical coding sublayer (PCS) are complex and time-consuming. Automotive Ethernet compliance testing consists of a finite set of tests as described by the standards. However, the testing requires 15 different configurations covering up to 10 different pieces of test equipment, wiring harnesses, cables, connectors and, test fixtures in order to comply with all of the required Tx, Rx, and link segment tests. Knowing whether your automotive system passes or fails the required standards compliance tests provides valuable insight and saves you numerous hours of valuable design time.

Reliable, High-Performance Automotive Ethernet

Keysight Technologies, Inc. has removed the complexity and headache involved in setting up and executing the tests necessary for compliance with BroadR-Reach automotive Ethernet standards for Tx, link segment and Rx connectivity. Keysight automotive Ethernet solutions provide software, instruments, fixtures and cables ready for complete testing of BroadR-Reach, 100Base-T1 and 1000Base-T1 standards. Whether you’re focused on design or validation, our automotive Ethernet solutions will accelerate your innovations from debug to characterization, to compliance, to completion.

Keysight BroadR-Reach, 100Base-T1 and 1000Base-T1 applications perform end-to-end functional and standards-compliance conformance testing of BroadR-Reach devices, with optional protocol decoding. Our Automotive Ethernet solutions suite not only give you all of the hardware, software, cables and accessories you need to enable compliance tests, they also provide:

– A setup wizard for quick and easy setup, configuration and test – A wide range of tests enabling faster and easier standards conformance – Accurate and repeatable results from Keysight precision instrumentation – Automated reporting in a comprehensive HTML format with margin analysis

Automotive Ethernet enables a single standard across all manufacturers witha 30% reduction in cabling weight and a 80% reduction in connectivity costsover today’s multiple proprietary standards.

04 | Keysight | Automotive Ethernet Solutions - Brochure

www.keysight.com/find/automotive-ethernet

Transmitter Link Segment Receiver

BroadR-Reach Compliance Solutions

Faster, More Efficient Automotive Ethernet Testing

Keysight’s solutions automate testing and validation of BroadR-Reach 100 Mb/s and 1,000 Mb/s automotive Ethernet for testing the electrical signaling of the physical media attachment (PMA) of both Tx and Rx, for the physical coding sublayer (PCS) and physical layer (PHY) control, as well as the media dependent interface (MDI) return loss. These tests are the primary components needed to verify that your automotive designs conform to the BroadR-Reach and IEEE standards.

– E6961A Automotive Ethernet Tx Compliance Solution – E6960A 1000Base-T1 Tx Compliance Application – N6467B BroadR-Reach Compliance Application (100Base-T1 compliant) – N8847A BroadR-Reach Protocol Trigger & Decode (100Base-T1 compliant) – E6964A BroadR-Reach MDI S-parameter Application (100Base-T1 compliant)

– E6962A BroadR-Reach Receiver Solution (100Base-T1 compliant)

– E6963A BroadR-Reach Link Segment Application (100Base-T1 compliant)

Solution component overview for BroadR-Reach

Key Features – Test applications including:

– Protocol trigger and decode compliant to BroadR-Reach V3.2 as well as 100Base-T1 (IEEE 802.3bw) standards – 100% test coverage for link segment tests using BroadR-Reach/100Base-T1 (IEEE 802.3bw) definitions for communications

channel version 2.0 – Bit error rate verification for Rx tests against BroadR-Reach V3.2 as well as 100Base-T1 (IEEE 802.3bw) standards – All required BroadR-Reach 100Base-T1 (IEEE 802.3bw) and 1000Base-T1 Tx (IEEE 802.3bp) tests

– Highly automated and easy-to-use – Report generation with pass/fail test results and fully annotated screen captures

05 | Keysight | Automotive Ethernet Solutions - Brochure

www.keysight.com/find/automotive-ethernet

Bundle detailsBundles give you all of the licensed application software as well as option to purchase all connectors, cables, and hardware for each solution. Application bundles include model numbers listed in Table 1. For complete ordering information see www.keysight.com/find/E6961A for Tx configuration, www.keysight.com/find/E6962A for Rx configuration and www.keysight.com/find/E6963A for link segment configuration.

BroadR-Reach Solution Bundles

1. Instrument bundles for BroadR-Reach/100Base-T1 TX and 1000Base-T1 TX are identical except for protocol fixture and software.2. MDI S-parameter software is ordered under E6961A as an option

Table 1.

E6961A BroadR-Reach/100 Base-T11

E6961A Tx 1000Base-T11

E6961A BroadR-Reach/100Base-T1 MDI S-parameter2

E6962A BroadR-Reach/100Base-T1

E6963A BroadR-Reach 100BaseT1 Link Segment

Software N6467B BroadR-Reach Compliance Application (100Base-T1 compliant) E6960A 1000Base-T1 Tx

Compliance ApplicationE6964A MDI S-parameter

BroadR-Reach (100Base-T1 compliant) Compliance Application

E6962A BroadR-Reach Receiver Application

(100Base-T1 compliant)

E6963A BroadR-Reach Link Segment Application (100Base-T1 compliant)N8847A BroadR-Reach

Protocol Trigger & Decoder (100Base-T1

compliant)

Accessories E6960A-26600frequency divider board

SMA cable SMA cable and adapters

N5395C Ethernet test fixture 11667B power splittersN4431B RF Electronic

calibration module

Energy efficient Ethernet text fixture

applies only to protocol

1131B Infiniimax 3.5 differential probe and E2678B probe head

SMA cables and adapters

82357B USB/GPIB interface

N4431B Ecal 4 ports and connectors

HardwareE5071C ENA Vector Network Analyzer, options 440,810, 820 M9010A PXIe Chassis

E5071C ENA Vector Network Analyzer with

option TDR

DSOS254A oscilloscope 2.5 GHz, 4 analog channelsM9037A PXIe High

Performance Embedded Controller

N9010A EXA Signal analyzer , 10 Hz to 44 GHz with option 503 and FSA

M3302A PXIe PXIe AWG and Digitizer

Combination

81150A Pulse Function Arbitrary Noise Generator, 2 channel

06 | Keysight | Automotive Ethernet Solutions - Brochure

This information is subject to change without notice.© Keysight Technologies, 2017Published in USA, October 20, 20175992-2561ENwww.keysight.com

www.keysight.com/find/automotive-ethernet

Evolving Since 1939Our unique combination of hardware, software, services, and people can help you reach your next breakthrough. We are unlocking the future of technology. From Hewlett-Packard to Agilent to Keysight.

Keysight software is downloadable

expertise. From first simulation

through first customer shipment, we

deliver the tools your team needs to

accelerate from data to information

to actionable insight.

Learn more atwww.keysight.com/find/software

Start with a 30-day free trial. www.keysight.com/find/free_trials

– Application software

Download your next insight

www.axiestandard.orgAdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an open standard that extends the AdvancedTCA for general purpose and semiconductor test. The business that became Keysight was a founding member of the AXIe consortium. ATCA®, AdvancedTCA®, and the ATCA logo are registered US trademarks of the PCI Industrial Computer Manufacturers Group.

www.lxistandard.org

LAN eXtensions for Instruments puts the power of Ethernet and the Web inside your test systems. The business that became Keysight was a founding member of the LXI consortium.

www.pxisa.org

PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a rugged, PC-based high-performance measurement and automation system.