August 2011 Interactive v1

RampaRt InteRnatIonal CoRp.Office: 613-729-0446

Fax: [email protected]

opeRatIonal equIpment Catalog

®

®

Advancing the Operator

Page 1Rampart International Corp.

www.rampartcorp.com

Operational Equipment

Personal Protection Equipment

Public Order Equipment

Optical Equipment

Fire Resistant Clothing

Medical Equipment

Weapon Systems and Accessories

Breaching Tools

Hydration Systems, Military & Tactical packs, Plate and Armour Carriers, Chest Rigs, MOLLE Pouches, EC Paints, Gloves

Facial Armour, Leg Armour, Portable Armour Wall, Soft Body Armour, Ballistic Rifle Plates, Ballistic Helmets, Ballistic Shields and Blankets

Riot/Corrections Helmets

Laser Aiming Devices, Weapon Lights, Tactical Periscopes, Combat Optics

FR Base Layers, FR Hoods (Balaclavas)

Survival Blankets, Emergency Bandages, Collapsible Wheeled Stretchers, Carts, Surgical Tables

Multi Shot and Single Shot Grenade Launchers, Weapon Grips, Magazine Storage, Weapon Components

Multi Purpose Breaching and Entry Tools, Door Rams, Non-Destructive Forcible Entry Tools

Page 2 - 12

Page 13 - 24

Page 25 - 26

Page 27 - 30

Page 32 - 33

Page 34 - 37

Page 38 - 40

Page 41 - 43

Illumination & Marking Systems

Visible and Infrared Illumination and Marking Systems

Page 31

Table of Contents



www.rampartcorp.com


Op

erat

iona

l Eq

uip

men

t

taste-FRee™Co-extruded PE film retains pure liquid taste with no plastic fla-vor. BPA and Phthalate free. As you will see below the synergy of the Glass-Like™ plastic film and Grunge-Guard™ gives you the assurance that your drinking water stays fresh, odor and taste-free for days, even weeks.

Source Hydration

gRunge-guaRd™ teChnology

An FDA approved and EPA registered antibacterial permanently embedded into the reservoir and tube to block bacteria growth. Effective for the life of the system. This protection has no effect on the water and is non-leaching.

glass-lIke™ FIlm teChnology

The smoothest polymer ever made and the closest to glass. As with glass, the system is “self-cleaning” since dirt and bacteria cannot stick to the reservoir surface. A liquid container with a smooth contact surface reduces the ability of bio-film to form. There are no irregularities on the surface for bacteria to cling to and the regular flow of water self cleans the container.

low maIntenanCe

SOURCE's technologies combined represent the next gen-eration in hydration systems, in which cleaning is no longer an issue. Our systems require the lowest maintenance on the market.



www.rampartcorp.com


Op

erational E

quip

ment

wIdepaC™ low pRoFIle hydRatIon system 2lHigh performance 2L hydration reservoir system. Exclusive 3 layer coextruded Polyethylene construction with Taste-Free™, low maintenance, Glass-Like™ liner. Integrated Grunge-Guard™ antimicrobial. QMT™ Source Quick Mate Technology hose fit-ting offers push button convenience, no leakage, offers click-in compatibility with USMC Miox filter system.

Source Hydration

maX CBRn hydRatIon system 3lSource’s Max CBRN hydration system was found to meet the U.S. Army’s CBRN hydration protection requirement. The Max CBRN withstands a 6 hour chemical warfare agent challenge after 30 days of operational use and much higher values when tested to other common international standards

taCtICal 3l hydRatIon paCk Our most popular hydration system. 3 usage modes: can be worn backpack style, inserted in rucks, or direct-attached to MOLLE on vests or rucks using Source QCA buckle system. Vertical front zipper for fast reservoir access.

dIamond 3lSOURCE's new Low profile hydration pack, specially designed for ballistic vest integration. Maximum utilization of our low profile technology reduces the depth of the carrier making it a truly low profile hydration system.

uta – unIveRsal tap adapteR A revolutionary solution for refilling your hydration system on the move. The res-ervoir is filled directly through the tube eliminating the need to remove the hy-dration pack from the back for refills



www.rampartcorp.com


Op

erat

iona

l Eq

uip

men

t Mystery Ranch Military & Tactical Packs

Mystery Ranch has a pack for every possible mission:

► Assault/Patrol ► Sustainment Expedition ► Comms ► Weapons Carry ► Medical ► Specialty ► Load Hauling ► Wildland Fire ► External/Hybrid Frame ► Internal Frame nICe FRame Bvs

The NICE Frame is the first design we have come up with that provides a radically better carry than a well-fit and well-packed Mystery Ranch internal frame. A thoughtful redesign of the interface between the user and the load led to the idea of building in pre-programmed flex to an ultra stable platform in a manner that has produced a level of performance never thought possible with extremely heavy loads. The result is a comfortable and flexible frame system capable of con-trolling huge loads while remaining low-profile and unobtrusive with light loads. Five different styles of packbag completes the NICE Frame System, creating a true pack system that is capable of hauling any load you might encounter

3 day assault BvsThis pack has all of the same great features of the standard 3 Day Assault with the addi-tion of our Bolstered Ventila-tion and Stability (BVS) sys-tem (patent pending). This system was initially designed to give more stability to a pack when worn with body armor. The bolsters are made of spacemesh material which also dramatically increase the amount of airflow across the back.

RapId aCCess tRauma system

RATS (Rapid Access Trauma System) is the pack you need when every second counts. Its special “rip access” design gives the user the ability to have complete access to the load in a flash. With three large external pockets and six Velcro anchored rip out pockets ( 4 triage, 2 I.V.) with

clear vinyl viewing windows this pack has everything you need to stay organized. The RATS pack also includes two trauma shears pockets; one external and one internal. It has the ability to be worn just as a simple ruck when traveling light but also has the necessary attachments to be mounted onto the NICE Frame giving a better harness for the user if they are carrying heavier loads.



www.rampartcorp.com


Op

erational E

quip

ment

nICe CRewCaB(Expanded with Load Cells)

The Crew Cab is a variable capacity pack made up of three separate compartments and multiple components that can be configured to carry loads that vary dramatically in size, shape and weight. The Crew Cab can be collapsed into a compact daypack or expanded for three to four day backpack hunts. The Crew Cab’s integrated expandable platform area is perfect for hauling Mystery Ranch Load Cells, Pelican cases, shed antlers, weed control sprayers, entire antelope, or even multiple elk quarters. When fully compressed, the Crew Cab is a low profile 1900 cu. inches that will not interfere with active motion. Fully expanded, the Crew Cab can reach the equivalent of a 5000 cu. pack. For Backcountry Hunters and anyone looking for a system that can do it all, this is your pack

Mystery Ranch Military & Tactical Packs

nICe oveRload alpha

The NICE Overload is the Mystery Ranch solution for carrying mortar systems and ammo cans yet still having a simple patrol sized pack available for the mission. This specially designed pack contains a hidden load bearing sling between the pack-bag and the frame. (pat. pending) The hidden sling’s location insures that heavy items are placed in the optimal location for transferring the load to the user’s back.



www.rampartcorp.com


Op

erat

iona

l Eq

uip

men

t

TAG offers an extensive assortment of tactical equipment to suit the needs of any operators:

► Plate Carriers/Vests ► Chest Rigs ► Bags, Cases and Packs ► MOLLE Pouches ► Slings and Holsters

Banshee RIFle plate CaRRIeR The Shellback Tactical Banshee rifle plate carrier is our first rifle plate carrier. It is an advanced Rifle Plate Carrier packed with features not found in other carriers. Ideal for use as an ac-tive shooter rig or tactical operations; Available in Black, Coyote Tan, Ranger Green, Multicam and A-TACS.

plate CaRRIeR Tactical Assault Gear's Hard Plate Carrier will accommodate any level 3 or 4 trauma plate. The pocket for the plates will keep your plates covering your vital areas regardless of the size of your plates. Our plate carrier can accommodate small through large long plates. The shoulder pads are removable and curved to stay away from your neck for added comfort. Built in side plate pockets are 7" H x 6.5" W. Fully adjustable, one size fits all. Available in Black, Coyote Tan, Ranger Green, Army Combat, Multicam, A-TACS, ABU

Tactical Assault Gear

havoC aRmoR CaRRIeR

Tactical Assault Gears Havoc armor carrier is designed to carry the SPEAR/BALCS cut soft armor. It features fully adjustable shoulders and has a 2 inch strip of pile tape on the front for identifiers.



www.rampartcorp.com


Op

erational E

quip

ment

Tactical Assault Gear

IntRepId Chest RIg

Tactical Assault Gear's Intrepid Chest Rig is designed as a single platform for a full combat load out. Fits easily over any plate carrier as well as full sized ar-mor carriers. Combat ready this chest rig gives you total flexibility

RIFleman Chest RIg

Tactical Assault Gears Rifleman Chest Rig was specifically designed for todays operational requirements. The four (4) main pouches will hold three (3) M16/M4 30rnd. Magazines. The two (2) utility pouches can hold a 200rnd. S.A.W drum, 100rnd. Box of M60/2

go tIme Chest RIg

The GO TIME chest rig is our original and started our line of active shooter chest rigs. This low profile chest rig allows you to carry two rifle mags and two pistol mags to combat and prevail in a danger-ous shooting situation.

40mm Belt

TAGs 40mm Belt will hold 12 rounds of any 40mm ammunition, such as HE, DP, and illumination rounds. Rounds are held in place by elastic loops and se-cured by hook and loop lids

Range Bag The Tactical Assault Gear range bag is a must have bag for organizing your gear. This bag is ideal to be used as a range bag, Bug Out Bag, small travel bag, emer-gency gear bag etc. Built to last!.

molle douBle staCked shIngle (6) pouCh



www.rampartcorp.com


Op

erat

iona

l Eq

uip

men

t

The NFM® Group has a diversified range of products and services. Every detail has a purpose and every solution can be justified.This is what we call the Full Spectrum Protection (FSP):

► Tactical textiles and load bearing equipment enhancing fightability and survivability ► Modular full spectrum body armor solutions

tRym qRs IntegRated vest m11 Modular body armor vest with quick release system.

► Durable Velcro fastening system ► Elastic belt fixes the vest to operator’s body ► One cord Quick Release System ► Internal compartments for front, back and side reinforce-

ment protection inserts

hugIn ConCealaBle vest Low profile vest designed for carrying basic and reinforcement protection.

► Lightweight construction and space fabric provide thermal and moisture control, ► Flexible girth and height adjustment, ► Elastic cummerbund fixes the vest to operator’s body, ► Vest can be adapted for SAPI or HEXA ballistic plates, ► Vest can carry basic and reinforcement or hit and stab protection inserts.

10X 40mm gRenade BandoleeR Bandoleer for ten 40mm grenades, aditional grenade carrier on basic load bearing equipment.

► Adjustable lids ► Lightweight construction ► Elastic bands hold grenades in place ► Adjustable suspenders with quick release buckles

BeaR aR taCtICal vest

The Bear Assault Rifle Version is a lightweight Load bearing vest mainly designed for long distance reconnaissance units.

► Can carry 9 assault rifle magazines and additional equipment in two cargo pouches ► MOLLE on chest, sides and, as well as on pouches ► Internal compartment for hydration bladder ► Integrated chest pockets for additional equipment or secondary weapon



www.rampartcorp.com


Op

erational E

quip

ment

eC paInt®The origin and reasons of developing the EC Paint® were fre-quently requirement from European military units for a remov-able, easy applicable paint in the visual and NIR spectrum for weapons and other equipment. The EC Paint® is produced ac-cording to the European regulations for environment protec-tion. Today, we deliver the EC Paint® in large quantities to users all over Europe.

► EC Paint® is manufactured in order to meet military stan-dards for Near Infra Red reflectance needs.

► EC Paint® is available in cans of 400ml for personal equip-ment or in 5 ltr. for vehicle applications.

eC paInt® RemoveR

EC Paint® is offered with a separate paint remover.

NFM Group

Item: Forest GreenNSN: 8010-25 152-2203Color: RAL 6031ZMVolume: 400 ml

Item: GreyNSN: –Color: RAL 7038MTVolume: 400 ml

Item: Olive DrabNSN: 8010-25 152-2204Color: RAL 6014MTVolume: 400 ml

Item: Mud BrownNSN: 8010-25 152-2205Color: RAL 8027ZMVolume: 400 ml

Item: sandNSN: 8010-25 152-2202Color: RAL 1001MTVolume: 400 ml

Item: BlackNSN: 8010-25 152-2201Color: RAL 9021ZMVolume: 400 ml

Item: WhiteNSN: 8010-25 152-2200Color: RAL 9010MTVolume: 400 ml

Item: EC Paint RemoverNSN: 8010-25-152-2206Color: –Volume: 400 ml



www.rampartcorp.com


Op

erat

iona

l Eq

uip

men

t Outdoor Research

oveRloRd shoRt gloves

This tactile combat glove brings dexterity and protection to the field. The design offers superb weapons-handling performance. Massif® Wolverine™ Stretch Nomex® fabric gives FR protection. Digital FR leather on the palm and fingers gives excellent tactility, while strategically placed vents manage moisture. Leather knuckles and wrist stirrups provide support and protection. Double-needle stitching prevents blown seams in the field.

FIReBRand gloves™These warm, durable gloves are designed for situations where protection from intense cold and inclement weather is of the greatest importance. The waterproof/breathable shells stand up to abrasion and deflect snow and rain. Water-resistant leather palms allow grip in bitterly cold conditions. The removable liners have fleece palms for dura-bility and lofted insulation for additional warmth.

IRonsIght gloves™ The IronSight Gloves™ are a quick drying, highly breathable combat glove made with very dexterious and supple synthetic leather for solid grip of weapons. Slip-free grip pads on the palms and fingers and seamless Precision Grip™ construction provide superior tactility. Back-of-hand injection molding and reinforcements provide light impact protection.

pIledRIveR gloves™ Max protection with superior dexterity and breathability for active conditions Designed for warm-to-hot conditions and high levels of activity, the Piledriver Gloves™ provide max breathability and venting with stretch mesh fabric. Low profile, molded knuckles with force-absorbing foam backing offer the greatest impact protection while maintaining minimal bulk to prevent interference with routine activities. The leather palms and anatomically conformed design enhance solid tactility, dexterity, and a secure fit for precise weapons and tool handling. The strike pad on the palms provide protection from impact and while loading magazines.Colours: Black



www.rampartcorp.com


Op

erational E

quip

ment

swoop mItt lIneR™ Highly dexterous FR liner with Zoned Insulation™ for extremely cold conditions at high altitudes without compromising dexteritDeveloped for pilots and aviation crews in extremely cold conditions at high altitudes, the liner of the Swoop System™ is made of FR fleece with zoned insulation for the greatest warmth where its needed without being bulky where dexterity and tactility are key. Insulation is greatest at the back of hand and wrist to aid in circulation and provide superior warmth. Fingertips are made of seamless FR goat-leather for acuity of touch great enough for dialing a cell phone. Made in the USA.

supeR CouloIR gloves Provides superior synergy of warmth and dexterity, versatilityLeave the trailhead with close-fitting soft shell gloves. They'll give you the grip and breathability you need on the skin track. After you've removed your skins pull on the warm, protective shells. They are waterproof and insulated with a synthetic loft that won't wet out in sloppy conditions. However you choose to use them, the Super Couloirs provide enough options to keep your hands comfortable in any backcountry situation. Made in the USAColours: Coyote

Outdoor Research

swoop mItt shell™ Waterproof breathable shell designed for extremely cold conditions at high altitudes without compromising dexterityDeveloped for pilots and aviation crews in extremely cold conditions at high altitudes, the shell of the Swoop System™ provides waterproof and breathable FR protection as well as superior tactility and dexterity for mechanical environments where precision is essential. The FR goat-leather palm is water resistant and provides a solid grip. The trigger finger mitt design accommodates all fingers in the mitt cavity for great warmth and dexterity. Made in the USA. Colours: Multicam, Coyote

FIRemaRk gloves

When breathability and dexterity are paramount, the Firemark Gloves™ provide ulti-mate comfort and functionality. Protection is provided through lightweight Nomex® fabric for flame resistance and light padding and leather knuckles for a light barrier against impact. Non-FR leather on the palm and fingers along with seam construction designed specifically to allow maximum seamless contact with weapons, these gloves offer the ultimate in tactility.



www.rampartcorp.com


Op

erat

iona

l Eq

uip

men

t

Belay glove ► Full-fingered version of the Climb-

ing Glove ► Cowhide main body with triple-

stitched, split cowhide palm reinforcement

► All wear areas are reinforced ► Bar-tacked webbing clip-in loop ► Hook and loop wrist closure ► Colours: natural/brown, tactical

black

ClImBIng glove ► The ultimate climbing glove! ► ¾ length fingers ► Cowhide main body with triple-

stitched, split cowhide palm reinforcement

► All wear areas are reinforced ► Double-stitched finger openings ► Bar-tacked webbing clip-in loop ► Hook and loop wrist closure ► Color: natural body with brown

palm

Metolius



www.rampartcorp.com

Personal Protection Equipment Perso

nal Pro

tection E

quip

ment

Fast g3aThe FAST G3A (Facial Armor System, 3rd generation “A” model) was designed for vehicle mounted convoy operations, and is currently being used during checkpoint ECP’s, CQB, building/room clearing, and logistical vehicle ops. It provides ballistic protection that is equal to or exceeds the Army Combat Helmet (ACH), USMC Light Weight Helmet (LWH), Modular Integrated Communication Helmet (MICH), and PASGT helmets. It has an NIJ IIIA ballistic rating. In today’s combat environment, the need for protection against airborne fragmentation is a must and the G3A provides protection to one of your most vital areas.

Features and Specifications ► Lightweight- 1lb (1.3lbs w/Versa Rails) ► Designed for turret gunners, Dynamic entry ops ► NVG, communication equipment, eye pro compatible ► Blunt force impact and blast mitigation ► No loss of peripheral vision ► No helmet modifications required ► Push button release, on or off in 1 second ► Meets or exceeds NIJ IIIA ballistic performance

Fast g3CThe FAST G3C was designed to provide protection for riflemen and any personnel who need a cheek weld with their weapon. The flexibility allows a proper cheek weld, for right and left hand shooters- while affording a high level of ballistic protection. The G3C is ballistically comparable to the Improved Outer Tactical Vest (IOTV) or the majority of currently issued soft armor vests.

Features and Specifications ► Lightweight- .9lbs, designed for riflemen ► Flexible armor- allows for cheek weld with rifle ► NVG, communication equipment, eye pro compatible ► No loss of peripheral vision ► No helmet modifications required ► Push button release, on or off in 1 second ► Multiple sizes ► 1000D Cordura outershell

Optional Accessories ► Accessory Rail

MTEK Weapon Systems

Optional Accessories ► MWS Clear Blast Visor ► 1000D Cordura® Cover ► ACC Rail ► Team Wendy ZAP® Pads



www.rampartcorp.com


Per

sona

l Pro

tect

ion

Eq

uip

men

t

MTEK Weapon Systems

mtek leg aRmouR ► Full IIIA leg armour with MOLLE ► Complete protection + drop leg

compatibility



www.rampartcorp.com


nal Pro

tection E

quip

ment

mCCuRdy’s aRmoR

► McCurdy's Armor™ is a LEGO™ type system that can be assembled quickly into multiple configurations ► McCurdy's Armor™ provides protection for operators while still providing full situational awareness through transparent armor ► McCurdy's Armor™ can be used in situations where rapid deployment is needed as well as fixed posts.

Features

► McCurdy's Armor™ conserves manpower, equipment and construction materials. ► Sets up in minutes! ► Multiple Configurations including guard posts and armor walls ► Reuse the system over and over again ► Quickly "de-constructed" so no infrastructure is left behind ► IIntuitive set up using universal components and common tools ► Minimal training is required ► Every part is a one-man carry and interchangeable with similar parts ► Includes transparent armor gun ports ► Quickly open into firing positions

Dynamic Defense Materials

possIBle uses

► Camp Guard Posts ► Observation Posts ► VCP/ECP Greeter stations ► Sniper Positions ► Cordon Security ► Police and Military Recruiting

Stations ► Election Posts ► Anywhere our personnel will be

exposed to enemy sniper fire, IDF, small arms, suicide bomb-ers, and grenade attacks



www.rampartcorp.com


Per

sona

l Pro

tect

ion

Eq

uip

men

t

stoppIng poweR Scalable Protection Levels:

mCCuRdy’s aRmoR - spSingle Layer of Armor on the frontExceeds NIJ IIIATested against:

► 7.62 x 54R LPS Ball, FMJ, 150 Grain, mild steel pin core, sniper round, Dragonov Rifle, Velocity 2780 FPS

► 7.62 x 39mm M1943 PS ball, FMJ, 122 grain bullet, mild steel pin core, AK-47, Velocity 2380 FPS

► 5.56 x 45mm, M855, FMJ, 62 grain bullet, hardened steel core with lead pusher, AR-15 (M16), Velocity 3050 ► 0.50 Caliber FSP (MIL-DTL-46593B), 207 Grain, chisel nosed cylinder, ~2000 FPS in panel

mCCuRdy’s aRmoR - mpSingle Layer of Armor on the front and backExceeds NIJ IVTested against:

► 7.62 x 63 (.30-06 APM2), 166 grain hard steel core, Velocity 2760 FPS (Zero degrees obliquity)

► 50 Caliber APM2, 708 grain hard steel core, Velocity 2555 FPS (30 degrees obliquity) ► 0.50 Caliber FSP (MIL-DTL-46593B), 207 grain, chisel nosed cylinder, Velocity ~4000

FPS ► (Zero degrees obliquity)

mCCuRdy’s aRmoR - hpDouble Armor on the frontExceeds NIJ IVTested against:

► 7.62 x 63 (.30-06 APM2), 166 grain hard steel core, Velocity 2760 FPS (Zero degrees obliquity)

mCCuRdy’s aRmoR - XpDouble Armor on the front and backExceeds NIJ IVTested against:

► .50 Caliber APM2, 708 grain hard steel core, Velocity 2845 (Zero degrees obliquity)

mCCuRdy’s aRmoR - Xp plus

Single Layer of Armor on the front and back with sand fillExceeds NIJ IVTested against:

► .50 Caliber APM2, 708 grain hard steel core, Velocity 2845 (Zero degrees obliquity) ► 20MM FSP (MIL-DTL-46593B), 840 grain, chisel nosed cylinder, Velocity 5335 FPS (Zero degrees obliquity) ► 7.62 x 54R, B32 API, 155 grain hard steel core, Mosin-Nagant rifle, 8 shots w/Velocity from 2747-2910 FPS ► 32.8 lbs of TNT wrapped in 3/8 mild steel (Equivalent to 2-155MM rounds), 3 Meters, System fully intact, no penetrations

Dynamic Defense Materials



www.rampartcorp.com


nal Pro

tection E

quip

ment

Survival Body Armor

speCIal thReat testIng on BallIstIC paCkages

Survival Armor ballistic packages have been tested beyond the NIJ 0101.06 minimum standard to include the special threats listed below.

Level II - NIJ II-STD-0101.06 ► 9mm 127 gr SXT+P+Ranger Winchester Luger SXT ► .40 Cal S&W 165 gr SXT ► .45 Cal ACP 230 gr GDHP ► .357 Sig 125 gr G DHP ► 5.7x28 ss192 27gr HP ► 5.7x28 ss197 40 gr FN ► 5.7x28 ss192 40 gr FN

Level IIIA - NIJ II-STD-0101.06 ► .40 Cal S&W 165 gr SXT

Level II - NIJ II-STD-0101.04/05`Interm ► 9mm 127 SXT+P+Ranger Winchester Luger SXT ► 9mm 115 gr FMJ ► .40 Cal S&W 160 gr BJHP ► .45 Cal ACP 230 gr GDHP ► .357 Mag 158 gr JSP

speCIal thReat testIng on l7Survival Armor L7 semi-rigid plate is certified to NIJ Standard 0101.08 stand alone IIIA and Additional Threat Testing

9mm 124 FMJ .40 S&W 180 GDHP Speer9mm 127 SXT+P+Ranger .44 Mag 240 LSWOGCWinchester .44 Mag Speer JHP 240 gr9mm 115 FMJ Fiocchi .45 ACP 230 GDHP Speer9mm 105 Disintigrator Rem .45 ACP 200 +P GDHP Speer9mm 65 IQ Aguila .22 LR Fed HP9x19 Remington FMJ RN 5.7x28 SS197 40 gr FN.357 Sig 125 gr G DHP 5.7x28 SS195 27 gr FN.357 Mag 110 JHP Winchester 7.62x25 Tok 85 gr FMJ S&B.357 SPF 158 gr Remington 7x25 Tok Russian CN84 (29).30 M1 Carbine 110 FMJ 12ga 1oz Rifled Slug Win

*ICW II armor plate will stop a military subsonic SOCOM car-tridge. 300-221 Fireball - aka .300 diamter Grn out of a sup-pressed 16¨ AR-15



www.rampartcorp.com


Per

sona

l Pro

tect

ion

Eq

uip

men

t

Survival Body Armor

vIsIBallIstICs

Survival Armor now gives you a clear choice.

With their patented VisiBallistics technology, Survivial Armor now gives the decision makers and users of personal body ar-mor peace of mind. They put the ability to inspect the vest in your hands where it belongs. Officers can clearly see what they are buying and how armour stands up to daily wear without removing the vest from service.

Safety of an officer is not the only concern of each officer, but should be the concern of any manufacturer who is producing equipment to protect them. Innovative products like Visi Bal-listics and LDSS-Load Distributing Strapping System demon-strators Survival Armor`s commitment to work collectively with end users to provide State-of-the-Art enhancements.

ldss stRaps

Load Distributing Strapping System

Survuval Armor introduces its revolutionary ballistic vest strap-ping sytem. Through extensive research and field trials, Sur-vival Armor has created a strapping system like no other. Its patented ergonomically shaped shoulder straps and reversible load distributing shaped side straps give the officer the ulti-mate choice in comfort.

The unique shape of our reversible load distributing strapping system gives the officer added comfort while holding the vest in its correct position. This also provides the choise of either 2” or 4” attachments to the front of the vest.

The reversible load distributing strapping system, when pulled snug, elongates the revolutionay shaped strap to distribute the weight of the vest over the lubar area.



www.rampartcorp.com


nal Pro

tection E

quip

ment

Female aRmoR 6Survival Armor introduces its NIJ 0101.06 Structured Female Vest available in both Phoenix6 and Falcon6 ballistic packages.

Survival Armor’s structured female vests offer a state-of-the-art “Superimposed” stitching and darting system. With our female shaped pad we offer the most comfortable, high performance female vest on the market. The vest has more coverage in the upper chest and under arm areas. Our “Superimposed”stitching and darting system allows the vest to accommodate all sizes and shapes of female officers allowing the vest to fit in the waist as well the chest.

Coverage or Comfort, female officers have always had to sacrifice one for the other. Not anymore! Survival Armor has improved fit and protection to give them what they asked for – Comfort and Safety.

peaCekeepeR

Not every threat faced is a ballistic threat, and with that in mind, Survival Armor presents the PeaceKeeper line. Officers operat-ing in a Correctional Facility have different needs.

The PeaceKeeper affords those officers protection against pris-on shanks and spikes. NIJ 0115.00 certified in Spike 1, Spike 2, and Spike 3 the PeaceKeeper offers that specialized protection that is needed.

peaCekeepeR6 BallIstIC / spIke ComBInatIon

When Ballistic and Spike protection are needed together in one vest, Survival Armor offers the PeaceKeeper combination Bal-listic/Spike NIJ 0101.06 and 0115.00 certified vests.

In addition to using the above armor packages with all of our concealable carriers, Survival Armor also offers Cell Extraction Suits and Tactical Vests for C.E.R.T. Teams

• Also available in NIJ 0101.05 packages

Survival Body Armor



www.rampartcorp.com


Per

sona

l Pro

tect

ion

Eq

uip

men

t

peRFoRmanCe6Survival Armor is pleased to announce our NIJ 0101.06 Performance Line of ballistic packages. The Performance6 package is the answer to law enforce-ment’s need for an economical, quality ballistic solution. Safety and quality were first and foremost in designing the Per-formance6 line.

► Available in VisiBallistics ► Pad suspension system ► Available for all of Survival Armor’s

carriers

Survival Body Armor

phoenIX6In following the tradition of the Phoenix product line, Survival Armor introduces the NIJ 0101.06 Phoenix6 ballistic pack-age. When designing the Phoenix6 bal-listic package, quality and officer safety were top concerns. The Phoenix line of ballistic protection offers our patented VisiBallistics.

► Pad suspension system ► VisiBallistics ► Available for all of Survival Armor’s

carriers

FalCon6BALLISTIC PROTECTION TO THE 6TH POWER.

The Falcon6 is Survival Armor’s premium high performance package. The Falcon6 utilizes an innovative ballistic package to optimize both performance and wearability. Using our state-of-the-art ballistic design combined with our proprietary Super-Flex1 Fabric, Survival Armor provides the officer a soft, flexible, high performance vest. This ballistic package combined with our REVOLUTIONARY LDSS (Load Distributing Strapping Sys-tem), a patented new ergonomic strapping system, allows you to feel like you’re wearing nothing at all.....Falcon6 the most comfortable vest available!

FALCON6 Features ► NIJ-STD-0101.06 – certified complete size range C1 – C5 ► Innovative ballistic package: ► Special Threat Testing beyond NIJ-STD-0101.06 ► Military Specification Fragmentation Tested ► Approved for Special Warfare Use ► Patented VisiBallistic Viewport ► Vertex moisture wicking anti-microbial carrier system

Super Flex 3D FabricSurvival Armor’s proprietary weave produces an innovative high performance fabric. Using new technology with proven ballistic fibers, Super-Flex offers superior strike face perfor-mance over traditional weaves. This new technology increases the performance of the vest by to methods. One, it slows down the cutting and spinning of the bullet. Two, it increases the speed at which the bullet deforms and flattens out.

From box to body, this is the most comfortable and softest vest I’ve worn. I couldn’t be happier."



www.rampartcorp.com


nal Pro

tection E

quip

ment

Leading Technology Composites

LTC is a world leader in armour products and has one of the most extensive offerings of ballistic plates on the market.

From NIJ 06 certified level IV stand alone, polyethylene, low profile, lightweight, ESAPI, XSAPI, Training.LTC has a ballistic plate to meet your requirement

level III, level III++ plates

Description Sizes Shape / CutLevel III in Conjunction w/ IIIA 5x7, 8x10, 10x12 Single Curve Level III Stand Alone 5x7, 8x10. 10x12 Single CurveLevel III Stand Alone 10x12 Single Curve, Shooters CutNIJ 06 Level III, Stand Alone 7x8, 6x8, 6x6, Single Curve, Shooters Cut Polyethylene 5x7, 8x10, 10x12Level III++ Stand Alone 8x10, 10x12 Single Curve, Shooters CutLevel III++ Side Plate 6x6, 6x8, 7x8 Single Curve – Full Size

level Iv and level III/Iv plates

Description Sizes Shape / Cut Level IV Stand Alone 10x12 Single Curve, Square Level IV Stand Alone 10x12 Single curve, shooters cutLevel IV Stand Alone 8x10 Single Curve, SquareLevel IV Stand Alone 8x10 Single Curve, Shooters CutLevel IV Stand Alone Side Plates 6x6, 6x8, 7x8 Single Curve – Full SizeNIJ O6 Level IV Stand Alone 10x12, 8x10 Single Curve, square, shooters cut or SAPI shooters cutNIJ 06 Level IV Stand Alone Side Plates 5x7, 6x6, 6x8, 7x8 Single Curve – Full SizeLevel IV Stand Alone 10x12 Triple Curve, shooters cut Level IV Stand Alone Lightweight 8x10, 10x12 Multi Curve, Shooters CutLevel IV Stand Alone SAPI Size S/M/L/XL SAPI ShapeLevel III/IV in conjunction with IIIA SAPI Size S/M/L/XL SAPI ShapeLevel III/IV in conjunction with IIIA 6x6, 6x8, 7x8 Single CurveNIJ 06 Level III/IV in conjunction with IIIA 8x10, 10x12 Single Curve, square, shooters cut or SAPI shooters cutNIJ 06 Level III/IV in conjunction with IIIA 5x7, 6x6, 6x8, 7x8 Single Curve – Full SizeSide Plates



www.rampartcorp.com


Per

sona

l Pro

tect

ion

Eq

uip

men

t

esapI, sapI, heavy esapI sapI, XsapI Description Size Shape / CutESAPI Spec S/M/L/XL SAPI ESAPIHeavy E-SAPI S/M/L/XL ESAPI(Ballistically compliant to E-SAPI Spec)ESAPI Side Plate 6x6, 6x8, 7x8 Full SizeHeavy ESAPI Side Plate 6x6, 7x8 Full Size Heavy SAPI S/M/L/XL 10x12 SAPI ShapeStealth Plate (API) S/M/L/XL 10x12 Multi Curve, Shooters CutStealth Plate (API) Side Plate 6x6 Single Curve – Full Size

tRauma plates

Description Size Shape / CutLevel IIIA, Polyethylene 5x8, 8x10, 10x12 Full Size Level IIIA, Aramid 5x8, 8x10, 10x12 Full Size

tRaInIng plates:Description Size Shape / CutMock SAPI – Training Plate S/M/L/XL SAPI ESAPI

Leading Technology Composites



www.rampartcorp.com


nal Pro

tection E

quip

ment

► Max Pro Police offers high quality, made in USA Aramid ballistic helmets. ► The SBH (seamless ballistic helmet) will be available for commercial sale late 2011.

gunFIghteR helmet

► Level IIIA Enhanced V50 Rating, (stanag 17) ► With 7 pad fit system

Options Include: ► Proprietary NVG shroud and picatinny rail system ► Custom NVG holes ► POLICE logos painted front and back or on sides of helmets

Max Pro Police & Armor

ComBat helmet (aCh style) ► Level IIIA Enhanced V50 Rating, (stanag 17) ► With 7 pad fit system

Options Include: ► Proprietary NVG shroud and picatinny rail system ► Custom NVG holes ► POLICE logos painted front and back or on sides of helmets



www.rampartcorp.com


Per

sona

l Pro

tect

ion

Eq

uip

men

t

United Shield International

United Shield International offers a complete selection of ballistic shields and blankets for any Requirement: Available in Level IIIa, III, III+ and IV in a variety of sizes from lightweight and compact to rolling bunkers.



www.rampartcorp.com


Pub

lic Ord

er Eq

uipm

ent

Helmet Systems

apho5 aRgus puBlIC oRdeR helmet

The new APHO5 Argus Public Order Helmet is certificatied in confromance to the latest Home Office PSDB Protective Headwear Standard for UK Police Standard for UK Police Public Order Helmets 2004.

► Testing requriement include: ► Coverage and peripheral vision ► Hearing attenuation ► Flammable liquids ► Flaem test ► Retention stability and strength tests ► Helmet penetration test ► Impact testing ► Vision test (prismatic astigmatic) ► Visor impat and pellet test ► Visor solvent test

Manufactured in the UK by Helmet Integrated Systems - the leading supplier of Cromwell and Argus helmets to the UK fire and police services and the leading international supplier of Alpha military and vcivil aircrew helmets. Choice of thermoplastic or GRP helmet shells incorporating optically correct, high impact-resistant polycarbonate visor with optional anti-mist, anti-scratch coating.

Range of sizes available to provide optimum fit, with combined impact and padded linings to maximize protection and comfort. Internal fitting accepts radio connection.



www.rampartcorp.com


Pub

lic O

rder

Eq

uip

men

t

Rs-100 RIot/taCtICal helmet

STANDARDSMeets or exceeds National Institute of Justice 0104.02 (riot), 0105.01 (crash) require-ments and Department of Transportation FMVSS-218 (for impact only).SHELLThe three-quarter coverage shell is constructed of high density Tenntex Thermo Com-posite utilizing high pressure injection compression molding for increased strength while maintaining a lightweight helmet, shell edge has a finished trim made of steel core extruded neoprene rubber. Visor is an integral molded part of the shell. Back edge of shell is tapered outward to allow positioning of shoulder weapon in prone position. Helmet sides flare to accommodate double canister gas masks behind face shield. Shell will be painted with a scratch resistant flat black paint. Complete helmet will not exceed 3 lbs. including shield.

Max Pro Police & Armor

Rd-taC RIot helmet

STANDARDSMeets or exceeds National Institute of Justice 0104.02 (riot), 0105.01 (crash) require-ments and Department of Transportation FMVSS-218 (for impact only). Custom paint-ing to your specs available for additional cost, if desired.SHELLThe half-coverage shell is constructed of Arimid Fiber Reinforced Thermoplastic com-posite utilizing high pressure compression molding for increased strength while main-taining a light weight helmet. The visor will be an integral part of the shell. The shell edge will be finished with a tough molded trim. Shell will be painted with a scratch resistant flat black paint. Complete helmet with shield will not exceed 3 lbs.

Ct-100 taCtICal/CoRReCtIonal helmet wIth shIeld and gRId

STANDARDSMeets or exceeds National Institute of Justice 0104.02 (riot), 0105.01 (crash) require-ments and Department of Transportation FMVSS-218 (for impact only).SHELLThe three-quarter coverage shell is constructed of high density Tenntex Thermo Com-posite utilizing high pressure injection compression molding for increased strength while keeping a lightweight helmet, shell edge will have a finished trim made of steel core extruded neoprene rubber. Back edge of shell will be tapered outward to allow positioning of shoulder weapon in prone position. Helmet sides flare to accommodate double canister gas masks behind face shields. Most current gas masks can be used with this helmet. Shell will be painted with a scratch resistant flat black paint. Com-plete helmet will not be more than 3 lbs. 5 oz. Fully equipped including the shield grid.



www.rampartcorp.com

Optical Equipment

Op

tical Eq

uipm

ent

dBal-a2 The powerful DBAL-A2 is equipped with an IR pointer, IR point-er/illuminator and your choice of a red Super Power Point or green Ultra Power Point visible pointer which is five times more visible than traditional red lasers. The DBAL-A2 is designed for maximum operational versatility while keeping weight and size to a minimum.

The AN/PEQ-15A (U.S. DoD model), currently in service with the U.S. Department of Defense and special operations forces worldwide. Frequently compared to the plastic-molded *AT-PIAL (AN/PEQ-15), the DBAL-A2 delivers superior operational longevity due to its all metal housing and mounting system.

When duty calls, the superior DBAL-A2 series is considered the most innovative multi-functional laser system available today.Available in Foliage Green, Desert Sand or Black.*Trademark of Insight Technologies, Inc.

Laser Devices

DBAL-A2H ► IR Pointer (<50mW) ► IR Pointer/Illuminator (<200mW)

Choice of ► Red Visible Pointer (<5mW) or ► Green Visible Pointer (<5mW, <30mW or <50mW)

modelsDBAL-A2

► IR Pointer (<50mW) ► IR Pointer/Illuminator (<50mW)

Choice of ► Red Visible Pointer (<5mW) or ► Green Visible Pointer (<5mW, <30mW or <50mW)

LE/Military only

dBal-I2The NEW DBAL-I2 is the cutting-edge replacement for the AN/PEQ-2A combining an infrared laser pointer and infrared point-er/ illuminator in a lightweight, rugged metal housing.

The DBAL-I2 ► Provides the same functionality as the AN/PEQ-2A ► Is smaller and lighter than the AN/PEQ-2A ► Is significantly shorter than the AN/PEQ-2A and leaves

more rail space for other accessories ► Mirrors the AN/PEQ-2A activation switch options

Built to perform under the most rigorous conditions and sur-vive the harshest environments, the DBAL-I2 provides opera-tors with a critical tool for use with night vision devices

Available in Desert Sand or Black.

modelsDBAL-I2

► IR Pointer (<50mW) with IR Pointer/Illuminator (<50mW or <*200mW) or

► Red Visible Pointer (<5mW) with IR Pointer/Illuminator (<5mW) or

► Green Visible Pointer (<5mW) with IR Pointer/Illuminator (<5mW) or

► Green Visible Pointer (<30mW) with IR Pointer/Illuminator (<50mW)

EXPORT LICENSE REQUIRED



www.rampartcorp.com

Optical Equipment

Op

tical

Eq

uip

men

t

opeRatIve lIghts

Our OPERATIVE® series of tactical lights are compact and light-weight, yet powerful and precise with the versatility you need to face any situation. These pocket-sized flashlights pack the power of larger full-size flashlights at a fraction of their size and weight.

The OV-2 lighting system has a modular design to meet the wide variety of today's battlefield needs. Interchangeable On/Off/Momentary push button switch, remote cable pressure pad switch or Dual (Remote Cable and Push Button Switch) options provide activation flexibility. The third generation model OV-3 adds an infrared laser illuminator to the tactical light. A selector ring located on the front of the light allows operators to switch between high and low power visible and infrared modes, or modulation mode for the tactical light. Both the OV-2 and the OV-3 easily mount to any MIL-SPEC-1913 rail using our low pro-file thumb screw mount that neatly tucks the light in between the top and side rails of an M4/M16.

Laser Devices

modelsOV-2

► <200 lumen high intensity LED ► Multiple configurations available.

OV-3 (LE/Military only; EXPORT LICENSE REQUIRED) ► IR Laser Illuminator (<25mW) ► <200 lumen high intensity LED

Blast 2 lIght/laseR ComBo

The powerful BLAST 2 is compact, extremely lightweight and designed to quickly attach to a variety of popular weapons.BLAST 2 is equipped with a Super Power Point visible red laser for pin-point accuracy and a bright, white tactical light to pro-vide spot on illumination. An optional infrared laser is available to Law Enforcement or Military agencies only.Switch options include a 3-way lever switch with or without optional remote cable switch.

BLAST 2 is available for Long Guns, Subguns and Pistols with NATO 1913/Picatinny Rails; Pistols with Standard/Weaver Acces-sory Rails and Pistols with Non-Standard Rails.

modelsBLAST 2Choice of

► Red Visible Pointer (<5mW) or ► *Infrared Pointer (<1mW)

Choice of

► Incandescent or ► LED

Choice of ► 3-way lever switch ► 3-way lever switch with remote cable pressure pad switch

EXPORT LICENSE REQUIRED*LE/Military only



www.rampartcorp.com

Optical Equipment

Op

tical Eq

uipm

ent

unI-sCope lhp-2000 lIght handheld taCtICal peRIsCope

The LHP-2000 is especially designed by Uni-Scope Optical Systems for reconnaissance, observation and surveillance missions from positions of cover and/or concealment. Rapidly deployed from its unique folded position this “around the corner” tactical peri-scope allows the users to view around and over urban obstacles, rural typography and other complex terrain. Whether the the user is faced with observation duties from roof top parapits in hostile environments or looking into darkened rooms while searching buildings the LHP-2000 provides a decided safety advantage

The LHP-2000 folds into three hinged sections that are easily stowed in and deployed from a field carrying bag that can be attached to load bearing vests or patrol packs.

Accessories ► Anti-Glare Filter ► Laser Protection Filters ► Flashlights ► Laser Illumination Pointers ► Tactical Tripods ► Night Vision Adapters ► Still & Video Camera ► Laser Range Finders

lhp-2000 taCtICal peRIsCope teChnICal speCIFICatIons

Weight 1.2kg. (2.64 Lbs) excluding carrying bagCarrying bag 300 grams (.5 Lbs) Dimensions (folded) L=240 mm, W=190 mm, H=70 mm Dimensions (deployed) L=560 mm, W=190 mm, H=70 mm Field of view 11 ºMagnification X3 (Three)Exit Eye-pupil 10 mmEye Relief 28 mmFocus Range 3 m to infinityTransmission > 70%Field Distortion < 5%Resolution > 60 arc-secEnvironmental cond. Mil-STD-810 E

Uni-Scope



www.rampartcorp.com

Optical Equipment

Op

tical

Eq

uip

men

t

Browe

BRowe ComBat optIC (BCo)The 4x32 BROWE® Combat Optic (BCO) is a state-of-the-art optic that delivers the best-in-practice features of high-quality optical glass, high precision machining, and rugged military design with unique, next-in-practice features that puts the BROWE® Combat Optic (BCO) at the forefront of its class. The BCO offers customers a modern designed, internally-adjustable, combat optic with many unique features, such as Single Intuitive Control (SIC), Target Light Sensor Technology, field-programmable BCO Microcontroller, and a vibration sensor – all packaged in a rugged and versatile titanium housing.

pRoduCt speCIFICatIons:Magnification: 4xEntrance Pupil: 32mmExit Pupil: 8mmEye Relief: 37mmLength: 132mm nominalWidth: 67mm nominal Weight: 485g (estimated)Field of view: 7 °Adjustment at 100 yds: .5 MOAAdjustment: Internally adjustable prismReticle pattern: BCO Chevron or Crosshair Ballistic Compensated: 5.56mm /.223 or 7.62/.308 Caliber Color Day/Night: Red Illumination source: LEDIllumination source controlled-Automatic: Flash programmable MicrocontrollerIllumination source controlled-Manual: 10 days settings and 3 night visionBattery Life: 2000 hrs. Avg. (Min. 720hrs. on max)Housing Material: Military Grade Pure Titanium - TiCP-2 Water Proof: 42m / 130ft. Fog proof: Filled with dry nitrogen Lens Coatings: Broad Band Anti-Reflective Coatings



www.rampartcorp.com

Illumination & Marking Systems Illuminatio

n & M

arking S

ystems

S & S Precision

manta stRoBe

PURPOSE :The Manta Strobe is part of S & S Precision’s Advanced Illumina-tion & Marking Systems (AIMS). Specifically designed to elimi-nate accidental overt light discharge.DETAILS:

► Infrared and Overt light modes ► Base plate is shaped to fit to the curvature of modern com-

bat helmets ► Positive one-handed operation with tactile power switch

and vibrating motor feedbackP/N: MS-0011 *Patent Pending

v-lItePURPOSE The V-Lite is part of S&S Precision’s Advanced Illumination & Marking Systems (AIMS). This product’s housing is flat and flex-ible, which forms to the curvature of the users helmet, reduc-ing snag hazards during parachute operations. The V-Lite’s low profile design attaches easily into MOLLE.DETAILS

► V-Lite colors: Red, Green, Blue and Infrared ► Available in 1 0f 3 Modes: On/Off, Blink/Off or On/Blink/Off ► Run-time:120+ Hours (continuous) *run-times vary de-

pending on frequency of use and duration of “ON” cycles (*Battery is not replaceable)

► Includes Plastic V-Lite sleeve with Velcro backing and Lanyard

Please download contact Rampart Internation for complete list

*Patent Pending



www.rampartcorp.com


Fire

Res

ista

nt C

loth

ing Carbon-X Base Layers

CaRBonX lIghtweIght Base layeR

The solution for balancing protection and comfort

Constructed using advanced patented technology, CarbonX lightweight base layer is the ideal solution for active wearers who want to keep comfortable even in potentially dangerous conditions. It is made from our TK-60 fabric, a lighter-weight, double jersey interlock knit comprised of a proprietary blend of high-performance fibers with an additional hydrophilic fiber to absorb and wick away moisture.

Unmatched protection: our TK-60 fabric never ignites, and it significantly outperforms competitive fabrics when subjected to direct flame, extreme heat, molten metal, hot/flammable liquids, or arc flash. even after intense exposure, our fabric maintains its integrity and continues to protect. Comfortable protection: our TK-60 fabric is light-weight, soft-to-the-touch, flexible, and odor-resistant. it also breathes extremely well, wicks away moisture, and dries quickly.

Permanent protection: Because our TK-60 fabric is inherently flame resistant, launder-ing does not impact its protective properties. the thermal protection will not wash out or wear away, nor will the product shrink when exposed to direct flame or high heat. the carbonX lightweight base layer can be worn again and again, even under condi-tions of daily exposure.

CaRBonX ultImate Base layeR

Ultimate Protection against heat and flame

Constructed using advanced patented technology, CarbonX® Ultimate Base Layer provides the ultimate level of protection for professionals working in extreme condi-tions when safety matters most. It is made from our DJ-77 black fabric, a double jersey interlock knit comprised of a proprietary blend of high-performance fibers.

Unmatched protection: our DJ-77 fabric never ignites, and it significantly outperforms competitive fabrics when subjected to direct flame, extreme heat, molten metal, hot/flammable liquids, or arc flash. even after intense exposure, our fabric maintains its integrity and continues to protect. Base-layer apparel made with carbonX DJ-77 fabric limits heat transfer at a much greater rate than other Fr garments of similar weight.

Comfortable protection: our DJ-77 fabric is lightweight, soft-to-the-touch, flexible, and odor-resistant. it also breathes extremely well, wicks away moisture, and dries quickly.

Permanent protection: Because the DJ-77 fabric is inherently flame resistant, launder-ing does not impact its protective properties. the thermal protection will not wash out or wear away, nor will the product shrink when exposed to direct flame or high heat.



www.rampartcorp.com


Fire R

esistant Clo

thing

Quest Fire Apparel

quest FIRe appaRel CaRBon-X hoods Part Number: ULCBXH2E84% Oxidized Polyacrylonitrile / 16% Para‐Aramide Technora

Design:2 ply hood measuring 16.1" from the top of the face opening to the bottom in front, 19" from crown to bib seam in the back, 14.75" crown to the shoulder notch on the sides. Width is 9" from the top of the face opening to the back seam & 9.5" from the bottom of the face opening to the back seam. The width at the bottom of the hood is 10". The face opening is sewn with 3/8" Heavy Duty covered elastic and measures 5" relaxed/ 14" in the stretched condition. The hood is 2 ply through‐out and complies with the specifications outlined in NFPA 1971 latest edition.

Construction:All seams are sewn with 100% Nomex thread and an 8 thread flatlock safety stitch is used for both durability and a comfortable flat "butt" seam.

Testing:All testing is performed by Underwriters Laboratories in accordance with NFPA 1971 latest edition and our hoods meet all of the required specifications (including labels). Underwriters Laboratories also provides the quarterly testing and site visits to Carbon-X’s manufacturing on a continuing basis.

Part Number: ULCBXH2B2E‐0784% Oxidized Polyacrylonitrile / 16% Para‐Aramide Technora

Design:2 ply hood measuring 13" from the crown to the bib seam. Width is 8.5" from the top of the face opening to the back seam & 10" from the bottom of the head to the back seam. The hood has a full 2 ply bib which extends 5" at the shoulder and 8" in the front and back. The face opening is sewn with 3/8" Heavy Duty covered elastic and measures 5" relaxed/ 14" in the stretched condition. The hood is 2 ply through‐out and complies with the specifications outlined in NFPA 1971 latest edition.

Construction:All seams are sewn with 100% Nomex thread and an 8 thread flatlock safety stitch is used for both durability and a comfortable flat "butt" seam.

Testing:All testing is performed by Underwriters Laboratories in accordance with NFPA 1971 latest edi-tion and our hoods meet all of the required specifications (including labels). Underwriters Labo-ratories also provides the quarterly testing and site visits to our manufacturing on a continuing basis.



www.rampartcorp.com

Medical Equipment

Med

ical

Eq

uip

men

t Persys Medical

BlIzzaRd suRvIval Blankets The Blizzard Survival brand and its exclusive Reflexcell Tech-nology have become the new standard in thermal protection for the military, emergency preparedness, law enforcement, outdoor sports, casualty care, disaster relief, medical treatment, and more. This radical new technology provides maximum warmth, reduces symptoms/signs of shock, and guards against the risk of hypothermia in the most compact of packages.Available as: Survival bag, blanket, vest, tube, SPR blanket

used By:

BlIzzaRd heat

Blizzard Heat Casualty Blanket is the new standard in hypother-mia prevention for casualties. This extra-large blanket wraps around a casualty and seals with hook-and-loop fasteners. Bliz-zard Heat includes four oxygen-activated heating pads, placed inside, which provide effective warming during CASEVAC. This blanket accommodates all patient sizes.



www.rampartcorp.com

Medical Equipment

Med

ical Eq

uipm

ent

emeRgenCy Bandage

The Emergency Bandage is the combat proven bandage of choice for U.S. and international military units. This life-saving bandage is the ideal solution for emergency treatment when every second counts. It is an innovative device that staunches blood flow for hemorrhagic wounds in emergency situations.

► Secure, water-resistant pressure applicator and closure bar ► Immediate direct pressure ► Quick and easy self-application ► Vacuum-sealed packaging ► Significant time, space, and cost savings ► Versatile and X-Ray friendly

Available in: ► 4” pad ► 6” pad ► 6” mobile pad ► 4” mobile pad ► Abdominal pad

Persys Medical



www.rampartcorp.com

Medical Equipment

Med

ical

Eq

uip

men

t

Ch401m2CH401M2 is a two-wheeled, heavy duty, multi-purpose, collaps-ible cart which multiples the effectiveness of men in the field while reducing fatigue. When combined with the available accessories, a package results that is unmatched in its abil-ity to deploy personnel, equipment and supplies with limited manpower. The CH401 models have the unique capability of adapting to transport stretchers, tents, ordnance and a host of other equipment. The CH401M2 is currently being deployed by the US Army. Standard components include a carry bag, wagon with hard polymer bottom and ends, a pair of detach-able saddlebags and four (4) accessory clamps (CH411).

Charlies Horse®

sR501RtThe SR501RT is the table top version of our successful SR901RT. When weight and cube are important and all of the capabili-ties of the SR901RT are not required, the SR501RT is the perfect choice. Lightweight and compact makes this the ideal piece of equipment for use in combat situations or remote civil applica-tions where a treatment platform is desirable. This unit comes with Accessory Kit A, which consists of the following: two (2) Arm Boards, two (2) IV Poles, one (1) Mayo Tray, two (2) Medi-cal Accessory Towers with two (2) Impact Mount Clamps (Ac-cessory Kit A NSN# 6530-01-529-4859). Available accessories include, Accessory Kit B which consist of two (2) stirrups (Ac-cessory Kit B NSN # 6530-01-529-4859), Accessory Kit C, Welch Allyn lights (Accessory Kit C NSN # 6530-01-529-4857), PAX LED Lighting System (NSN # 6530-01-549-1089), Legs (SR681 NSN # 6530-01-529-4546), Backrest (SR700BR NSN to be assigned) and

Available accessories include: Dual wheels (CH471, NSN #: 3920-01-511-3701), Harness (CH491) and either Raven or Talon Stretcher. The unit weighs 80 lbs. with a cargo capacity of 500 lbs. The cargo area is 22” x 55” x 10”.

either the Raven or Talon Stretchers. Unit weighs 80 lbs. with a weight capacity of 500 lbs.

SR Series ► These collapsible wheeled stretcher carriers and multi-purpose utility tables enhance the treatment and movement of patients

while assisting in the deployment and re-supply of field medical facilitiesCH Series

► These collapsible carts enhance mission capabilities by multiplying existing manpower, expanding operational range of ground forces, deploying weapon systems and assisting in the evacuation of casualties.



www.rampartcorp.com

Medical Equipment

Med

ical Eq

uipm

ent

Charlies Horse

sR301RtThe low profile and ground-hugging center of gravity of the SR301RT provides a unique platform to complete tasks which, up until now, required two or four person-nel. In critical disaster situations where manpower is limited, one man can gather casualties and deliver them to aid stations. This holds true even when personnel are required to perform these tasks in Level A Suits. Because of the unique design of the SR301RT, it can function as a bulk hauler deploying equipment which usually requires several personnel. Available accessories include Dual Wheels (CH471 NSN# 3920-01-511-3701), Handle Medical Bag (SR431 NSN # 3920-01-529-5123), which provides ad-ditional cargo space for medical supplies, Backrest (SR700BR) and either a Raven or Talon stretcher. Unit weighs 25 lbs with a weight capacity of 500 lbs.

sR701RtThe SR701RT is a multi-functional casualty collection/treatment/evacuation device. When accessorized with Accessory Kit A and Cargo Hauler (SR731), the SR701RT be-comes a mobile medical facility within itself. The SR701RT is currently being deployed by the United States Marine Corps., US Army, Navy, Air Force and U.S. Justice Depart-ment. Available accessories include Cargo Hauler (SR731 NSN # 3920-01-529-4789), Accessory Kit A (NSN # 6530-01-529-4842) consisting of two (2) Accessory Clamps A, two (2) IV Poles, two (2) arm boards, one (1) mayo tray, two (2) medical accessory tow-ers with two (2) Impact mounting clamps, Accessory Kit B (NSN # 6530-01-529-4859) consisting of two (2) stirrups, Accessory Kit C (NSN # 6530-01-529-4857) consisting of two Welch Allyn examination lights, PAX LED Lighting system (NSN # 6530-01-549-1089), Backrest (SR700BR NSN to be assigned) and either the Raven or Talon Stretch-ers. Unit weighs 68 lbs with a cargo capacity of 500 lbs. Cargo area is 21” x 23” x 48”.

®

sR901RtThe SR901RT is truly unique. This Multi-Purpose Utility Table can be utilized to pro-vide a functional operating table which is lightweight and compact to far forward remote areas allowing doctors to stabilize casualties and operate when necessary prior to transport. This table enables assisting nurses to customize the table to the doctor’s specific needs for treatment in seconds. Unit comes Accessory Kit A (NSN # 6530-01-529-4842) consisting of two (2) Accessory Clamps A, two (2) IV Poles, two (2) arm boards, one (1) mayo tray, two (2) medical accessory towers with two (2) Impact mounting clamps, Accessory Kit B (NSN # 6530-01-529-4859) consisting of two (2) stir-rups and the SR700BR, Backrest (NSN # to be assigned). Available accessories include: Accessory Kit C (NSN # 6530-01-529-4857) which consist of two (2) examination lights, PAX LED Lighting System (NSN # 6530-01-549-1089) and either the Raven or Talon Stretchers. Unit weighs 115 lbs., with a weight capacity of 500 lbs.



www.rampartcorp.com


Wea

po

n S

yste

ms

and

Acc

esso

ries

Milkor South Africa

40mm mgl mk 1l

The Milkor 40mm Multiple Grenade Launcher Mark 1 L is a rugged, robust, shoulder fired 6-shot launcher that has been qualified according to Military Standards. The MGL Mark 1 L has a lengthened 140mm chamber as opposed to the standard 105mm chamber of the Mark 1S. The extra 35mm chamber area enables this weapon to fire a variety of ammunition for differ-ent applications. The effective range of the MGL Mark 1 L is 375 meters and 600m with specific extended range ammunition. All shots can be fired in rapid succession of 6 rounds in less than 3 seconds. The MGLMark 1 L is a semi-automatic weapon de-signed with simplicity to offer uncompromising reliability and efficiency.

The MGL Mark 1 L is ideally designed for use by Armed Forces where its extreme versatility can be used in combat or peace-keeping environments. The MGL Mark 1L is capable of firing a wide range of Lethal and Less Lethal munitions thus offering the bearer the ability to employ the use of rounds ideally suited for the specific situation, including Tear Gas and Rubber Baton rounds for crowd control, Grenade and Flash-bang rounds for combat situations and many more. The MGLMark 1 L enables the user to engage a wider range of targets than currently pos-sible with a standard 40mm MGL.

37/38 oR 40mm stoppeR

The Millkor 37/38 or 40mm Stopper Convertible is an extremely lightweight single shot break-open weapon designed to give optimum performance utilizing a variety of 37/38 Less Lethal or 40mm Less Lethal and Lethal rounds. As a security or assault weapon, it can be fired from the shoulder or like a pistol out of the hand.

The weapon is extremely simple to operate and all metal surfaces are treated with a coating for corrosion protection plus long-life dry film lubrication. It is a conven-tional single shot, break-open weapon with a unique floating firing pin mechanism that ensures safety when accidently dropped. The components of the weapon are interchangeable, providing a wide range of applications ranging from Less Lethal 37/38mm to a 40mm Lethal weapon.



www.rampartcorp.com


Weap

on S

ystems and

Accesso

ries

Fast mag gen III ► The FASTMAG®; Gen III holds most

5.56mm/.223 ammunition maga-zines. It reduces reloading cycle time for the operator

► Can be mounted in the up or down direction (operator’s preference). The system eliminates the need for traditional top closures.

► While providing a secure point of access. The tension system is adjust-able to meet the users preference for removal force.

► The mounting slots on the front al-low operators to ‘double-stack’ or at-tach nylon accessory pouches using MALICE®; Clips, giving even more options for your kit setup.

magBoot gen II The ITW Military Products MagBOOT is designed to provide enhanced grip and stability for most 5.56mm/.223 magazines. Built tough, the MagBOOT provides slip resistant handling in tough environmental and gloved hand operations. It also pro-vides a better base for unique firing situations. The Tan, Coyote Brown, Flat Dark Earth (FDE) and Foliage Green colors offer IR compliance to provide better signature management and the enhanced material provides a buffer for noise reduction.

ITW Nexus

Belt Version

MOLLE Version



www.rampartcorp.com


Wea

po

n S

yste

ms

and

Acc

esso

ries

stRaC gRIp

The patent pending STRAC Grip is an advanced polymer grip that mounts to the magazine well of AR15/M16/M4 weapons platform.

► No tools required ► No weapon modifications required. ► Installs in as little as 10 seconds. ► Single piece of lightweight advanced polymer. ► Slides over magwell and locks in behind the forward take-

down pin. ► Beveled opening on bottom facilitates smoother magazine

reloads. ► The top of the grip is extended to provide greater control

and comfort.

stRaC Fast system

Designed for close quarter combat (CQC) the M4 FAST System is the only reloading device in the world that provides a single recovery point for multiple magazines. Through muscle mem-ory this single recovery point allows the operator to keep their eyes and weapon focused forward and on target. A proficient operator equipped with the FAST System is able to reload and continue firing before the magazine they just dropped stops moving on the ground.

The M4 FAST System is ambidextrous and holds three standard 30 round, 5.56 caliber magazines (standard size magazines only). It is not intended to be a sole source of magazines and should always be accompanied by whatever load-out the op-erator would normally use (pouches, etc). Magazines inside the FAST System are loaded in a front to back configuration unlike current side by side configurations. This unique configuration reduces the systems profile and allows magazine weight to be spread evenly across the operator’s torso.

STRAC Tech



www.rampartcorp.com

Breaching Tools

Breaching

Too

ls

Jersey Tactical

JeRsey Claw

Multi-Purpose Breaching Tool- One tool that combines: ► Sledge ► Axe ► Halogen ► Window Rake ► Ram ► Pry Bar ► E-tool

Features ► Total Weight 10 lbs - Offered in two lengths 24" and 30" ► Offered in Tactical Black and Safety Yellow ► Non slip hand grip ► The Claws entire head is casted out of the same custom

material used to create the Jersey Boot ► Specifically designed to be easily used by any member of

your agency - The Next Generation Of Manual Breaching has arrived in the JTC Claw

JeRsey Boot

► Tired of carrying a 50lb breaching pack and 35 lb ram for hours on operations? The Jersey boot replaces all breach-ing tools and only weighs 26.5 pounds.

► Inward Swinging Door-Use as a conventional ram / having a larger sweet spot enables operator to deliver more kinetic energy over a larger area without the risk of penetrating door.

► Outward swinging Door-Use as a pry bar to pry open virtu-ally any door including Class 3 Steel door with steel jamb installed in block or concrete

► Break & Rake-Safely and effectively break and rake win-dows, wall board or whatever you can think of. The extra weight eliminates the need for the operator to take a big swing. Great for confined areas

► Lock Busting– Can break through almost any padlock, in-cluding extra heavy duty hardened steel.

► Sledge-Used to set another boot, break locks or whatever sledge operation is needed

► Step-Need that extra boost, don't step on an operator, step on the boot. Great for porting windows



www.rampartcorp.com

Breaching Tools

Bre

achi

ng T

oo

ls

w-tool

Non-Destructive Forcible Entry Tool

The W Tool is a one person manually operated self-contained hydraulic tool designed for multiple types of public safety op-erations. The W-Tool can be used as a 25lb. Battering Ram when rapid intervention is required, or quickly converted into a Non-Destructive forcible entry tool.

Available in one of three colors, each with it's corresponding decals: Fire Red, Law Enforcement Black, and Rescue Blue. The W Tool comes in two sizes; standard and a WS version that is 7” shorter and 5lbs lighter.

The design incorporates three basic components; A manually operated 6,000 pound hydraulic power head attached to a tele-scopic main body constructed of an outer 2”x2” square steel tube, 3/16 wall thickness; An inner 1.5”x1.5” square steel tube, 3/16 wall thickness, 27” long designed to adjust in length tele-scopically to 39”, attached to a top and bottom plates construct-ed of ½”plate steel 3”x 5”. The top and bottom plates are de-signed to receive multiple accessory attachments allowing the tool to perform multiple rescue tasks. All W Tools are equipped with an adjustable shoulder carry strap and an integrated LED light that allows for hands free night-illumination

w-pR 1 tool

The W-PR Tools are the latest addition to the W-Tool line. Utiliz-ing the same self contained hydraulic design the W-PR Tool is an easy to operate one-person tool. Designed for rapid interven-tion in lifting and stabilization applications the W-PR provides 4.5" and 6000 PSI of lifting power in both horizontal and vertical applications. The W-PR can be used as a stand-alone device or quickly attached to 4 x 4 lumber for various applications. The W-PR is available in a single or double tool set that includes custom carry bags. All PR Tools include an attached LED light for low light applications

Weddle Tool Company



www.rampartcorp.com

Breaching Tools

Breaching

Too

ls

pow·R·entRy

The powder-actuated, multifunction POW•R•ENTRY® tool is fast entry tool of choice for the U. S. Armed Forces, tactical and special operations personnel, police and fire departments and emergency responders around the world.

► Shears off door handles ► Breaks out dead bolts ► Rips through security bars ► Breaches gates ► Destroys padlocks ► Shears hinges ► Severs reinforcing bars

With specially designed drive mechanism and cutting heads, the lightweight POW•R•ENTRY® tool safely breaks through ob-stacles with 30,000 pounds (13,600 kg.) per square inch of force at the point of contact; No flashes or explosions and no parts leaving the tool.

The multifunction POW•R•ENTRY® tool is fast entry tool of choice for the U. S. Armed Forces, tactical and special opera-tions personnel, police and fire departments and emergency responders around the world. POW•R•ENTRY®: Safe, depend-able, fast entry tool for quick, easy breaching and immediate access when every second counts.

Available Upgrades: ► Tactical assault strap kit ► Nail module ► Tent peg nose piece for POW•R•ENTRY® ► Additional Boltbuster, Lockbuster or Flying Chisel

assemblies ► Additional .27 caliber powder loads ► Spare piston and ring ► Additional bottle of lubricant/cleaner

IML Corp

There are two POW•R•ENTRY® kits available for purchase-Stan-dard and Deluxe.Features of the POW•R•ENTRY® Standard Kit include:

► POW•R•ENTRY® tactical carry bag with storage for all in-cluded accessories

► Main Barrel Assembly, with Feeding and Firing Modules as-sembled and ready to use

► Lockbuster drive rod module with drive rod assembly ► Boltbuster chisel module with chisel assembly. ► Flying chisel module with chisel assembly ► Reset assembly ► Spare piston and ring ► 100 .27 caliber Level 3 (green) in 10 shot strips ► 100 .27 caliber Level 5 (red) powder loads in 10 shot strips ► Lubricant/cleaner ► Standard accessory kit ► Kerry key ► POW•R•ENTRY® Operators Manual

Features of the POW•R•ENTRY® Deluxe Kit include: ► All components of the Standard kit plus; ► Spare Flying Chisel assembly ► Spare Boltbuster Chisel assembly ► Spare Reset assembly ► Deluxe Accessory kit ► POW•R•ENTRY® Tactical Carry bag



www.rampartcorp.com

notes

®

®

RampaRt InteRnatIonal CoRp.Office: 613-729-0446

Fax: [email protected]

© 2011 - Revision 2

Documents

August 2011 Interactive v1