Upload
sai-global-apac
View
219
Download
0
Embed Size (px)
Citation preview
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
1/18
AS/NZS 4246.1:1994ISO/IEC ISP 11181-1:1993
Australian/New Zealand Standard
Information technologyInternational standardized profileFOD26Open document format:Enhanced document structureCharacter, raster graphics and
geometric graphics contentarchitectures
Part 1: Document applicationprofile
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
2/18
AS/NZS 4246.1:1994
This Joint Australian/New Zealand Standard was prepared by Joint Technical
Committee IT/1, Information SystemsInterconnection. It was approved on behalf of
the Council of Standards Australia on 9 August 1994 and on behalf of the Council of
Standards New Zealand on 9 May 1994. It was published on 17 October 1994.
The following interests are represented on Committee IT/1:
Australian Bankers Association
Australian Bureau of Statistics
Australian Chamber of Commerce and IndustryAustralian Committee of Directors and Principals
Australian Computer Society
Australian Computer Users Association
Australian Information Industry Association
Australian Vice Chancellors Committee
Department of Defence, Australia
Department of Industry, S cience and Technology, A ustralia
Government Computing Service, New Zealand
Information Exchange Steering Committee, Australia
Institute of Information and Communication Technologies, CSIRO, Australia
OPTUS Communications, Australia
Telecom AustraliaTelecom New Zealand
Review of Standards. To keep abreast of progress in i ndustry, Joint Australian/New Zealand Standards are subject to periodic review and are kept up to date by theissue of amendments or new editions as necessary. It is important therefore thatStandards users ensure that they are in possession of the latest edition, and anyamendments thereto.
Full details of all Joint Standards and related publications will be found in theStandards Australia and Standards New Zealand Catalogue of Publications; thisinformation is supplemented each month by the magazines The Australian Standardand Standards New Zealand, which subscribing members receive, and which givedetails of new publications, new editions and amendments, and of withdrawnStandards.
Suggestions for improvements to Joint Standards, addressed to the head office of eitherStandards Australia or Standards New Zealand, are welcomed. Notification of anyinaccuracy or ambiguity found in a Joint Australian/New Zealand Standard should bemade without delay in order that the matter may be investigated and appropriate actiontaken.
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
3/18
AS/NZS 4246.1:1994
Australian/New Zealand Standard
Information technologyInternational standardized profileFOD26Open document format:Enhanced document structureCharacter, raster graphics andgeometric graphics content
architectures
Part 1: Document applicationprofile
First published as Joint Standard AS/NZS 4246.1:1994.
PUBLISHED JOINTLY BY:
STANDARDS AUSTRALIA1 T he Crescent,Homebush NSW 2140 Australia
STANDARDS NEW ZEALANDLevel 10, Radio New Zealand House,
155 The Terrace,Wellington 6001 New ZealandISBN 0 7262 9227 3
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
4/18
ii
PREFACE
This Standard was prepared by the Joint Standards A ustralia/Standards New Zealand Committee IT/1on Information SystemsInterconnection. It is identical with and has been reproduced from ISO/IECISP 11181-1:1993, Information technologyInternational Standardized Profile FOD26Open
Docum ent Format: Enhanced docum ent structure Character, raster graphic s and geometric graphic scontent architectures, Part 1: Document Application Profile (DAP).
This Standard is issued as a Joint Standard under the terms of the Active Cooperation Agreementbetween Standards Australia and Standards New Zealand.
The objective of this Standard is to provide users requiring to transfer documents electronically witha specification for interchange formats (character, raster and geometric graphics) for the transfer ofenhanced structured documents between equipment designed for word or document processing.
This Standard is one of a s eries of Open Systems Interconnection (OSI) Standards w hich are currentlyunder development. Since OSI Standards are developmental, there may be some minor difficultiesencountered in their implementation. For this reason, Standards Australia will be providing, throughthe OSI Help Desk, a service to coordinate and disseminate information concerning difficulties which
are identified in using this Standard.Users of this Standard are advised by Standards Australia and Standards New Zealand, underarrangements made w ith ISO and IEC, as well as certain other Standards organizations, that the numberof this Standard is not reproduced on each page; its identity is shown only on the cover and title pages.
For the purpose of this Standard, the source text should be modified as follows:
(a) Terminology The words this Australian/New Zealand Standard should replace the words thisInternational Standard wherever they appear.
(b) Decimal marker Substitute a full point for a comma where it appears as a decimal marker.
(c) References The references to international Standards should be replaced by references, whereappropriate, to the following Australian or Joint Australian/New Zealand Standards:
Refer ence to International Standardor other publication
Australian or JointAustralian/New Zealand Standard
ISO2022 Inf orm ation pro cessingIS O 7-
bit and 8-bit coded charactersetsCode extension techniques
AS1953 In for mation pr oce ss ingI SO 7- bit
and 8-bit coded character setsCode extension techniques
2375 Da ta pr ocess ingP rocedure forthe re gis tra ti on o f es cap esequences
6937 Inf or mation proces singCodedcha ra cter s ets fo r t ext c om-munication
6937-2 Part 2: Latin alphabetic and non-alphabetic graphic characters
6937-2/Add.1 Addendum 1
2793 I nf orma tion proc essi ngC odedchara cter sets f or text com-munication
2793. 2 Pa rt 2: L ati n a lphabetic and non-alphabetic graphic characters
8613 Infor mat ion pr oce ssi ng Te xtan d of fi ce sy ste m s Of f ic eDocument Architecture (ODA)and interchange format
8613-1 Part 1: Introduction and generalprinciples
3951 In for mation pr oces singT ext andoffice systemsOff ice DocumentArchitecture (ODA) and inter-change format
3951. 1 Pa rt 1: I ntr oduction and gener alprinciples
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
5/18
iii
ISO8613-1/Add.1 Addendum 1: Document Applica-
tion Profile Proforma and Notation8613-2 Part 2: Document structures8613-4 Part 4: Document profile
8613-5 Par t 5: Open Document I nter-change Format (ODIF)
8613- 6 Pa rt 6: Char act er content ar chi-tectures
8613-7 Pa rt 7: Ras ter graphics c ontentarchitectures
8613- 8 Pa rt 8: G eom etri c gra phic s con-tent architectures
AS
3951.2 Part 2: Document structures3951.4 Pa rt 4: Do cument pro file
3951.5 Pa rt 5: Of fi ce Document Inter -change format (ODIF)
3951.6 Pa rt 6: Char acter c ont ent arc hi-tectures
3951.7 Pa rt 7: Ras ter gra phics c ontentarchitectures
3951.8 Pa rt 8: G eom etr ic gr aphics c on-tent architectures
8859 I nf or mation proc ess ing 8- bitsingle-byte coded graphic sets
8859-1 Part 1: Latin alphabet No 1
8879 In for mation pr oce ss ingT ext a nd
o f f i c e s y s t e m s S t a n d a r dGeneralized Markup Language(SGML)
3514 Infor mat ion pro ces si ng Text
and office systemsStandardgeneralized markup language(SGML)
9069 I nf or mation processingSGMLsupport facilitiesSGML Docu-ment Interchange Format (SDIF)
3649 Inf orm ation pr ocess ingS GMLsupport facilitiesSGML docu-ment interchange format (SDIF)
9293 In for mation pr oce ss ingV olum eand file structure of flexible diskc ar t r id ge s f or i nf or m at io nexchange
3714 D ata storage a nd tr ansf ermediaVolume and file struc-ture of flexible disk cartridges( di sk et te s) f or i nf or m at io ninterchange
ISO/IEC
646 In for mation t echnol ogyI SO 7- bitcoded character set for informationinterchange
1776 Infor mat ion pr oce ssi ng7- bitcoded character set for informa-tion interchange
7350 I nfor mation technologyRegis-tration of repertoires of graphiccharacters from ISO/IEC 10367
2760 T ext comm unicationRegis-tr ation of gr aphic cha ra ctersubrepertoires
8632 In for mat ion t echnol ogyC om-puter graphicsMetafile for thestorage and transfer of picturedescription information
8632-1 Part 1: Functional specification8632-3 Part 3: Binary encoding
3603 Comput er g raphics Metafile sfor the storage and transfer ofpicture description information
3603 Part 1: Functional specifications3603 Pa rt 3: Binar y encoding
8824 Info rm at ion te chnologyO pe nS y s t e m s I n t e r c o n n e c t i o n Specification of Abstract SyntaxNotation One (ASN.1)
3625 I nf or mation technologyO penSystems InterconnectionSpeci-f ica tion of Ab st ra ct S yntaxNotation One (ASN.1)
8825 Info rm at ion te chnologyO pe nSystems InterconnectionSpecifi-cation of Basic Encoding Rules forAbstract Syntax Notation One(ASN.1)
AS/NZS3626 I nf or mation technologyO pen
Systems InterconnectionSpeci-fication of basic encoding rulesfor Abstract Syntax Notation One(ASN.1)
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
6/18
iv
ISO/IEC9541 I nf or mation te chnologyF ont
information interchange
AS/NZS4159 Inf orma tion t echnologyFont
information interchange
ISO/IEC ISP10610 I nf or ma tion tech nolo gy Inter -
na ti ona l S ta nda r diz ed P r of i leFOD11Open Document Format:S im pl e doc um e nt s tr uc tur e Character content architecture only
10610- 1 Pa rt 1: D ocume nt ApplicationProfile (DAP)
4246 I nfor mation technology Inter -national Standardized ProfileFOD11Open Document For-mat: Simple document struc-tureCharacter content archi-tecture only
4246.1 Pa rt 1: Docum ent a pplicationprofile
11182 I nf or ma tion tech nolo gy Inter -na ti ona l S ta nda r diz ed P r of i leFOD36Open Document Format:Extended document structureCharacter, raster graphics and
ge om et ri c gr a ph ic s c on te ntarchitectures
11182- 1 Pa rt 1: D ocume nt ApplicationProfile (DAP)
4247 I nfor mation technology Inter -national standardized profileFOD36Open document format:Extended document structureCharacter, raster graphics and
g eom e tr ic g ra ph ics c on te ntarchitectures
4247.1 Pa rt 1: Docum ent a pplicationprofile
ISO/IEC TR10000 I nf or ma tion te chnology Fr am e-
wo rk a nd ta xonom y of I nte r-national Standardized Prof iles
10000- 1 Pa rt 1: Fr ame wo rk 10000-2 Part 2: Taxonomy of ISO profiles
3966 In for mation tec hnology Fr ame -work and taxonomy of Inter-national Standardized Prof iles
3966.1 Pa rt 1: Fr amewor k 3966.2 part 2: Taxonomy of profiles
CCITT RecommendationT.4 Standardization of group 3 fac-
simile apparatus for documenttransmission
T.6 Facsimile coding schemes andc odi ng c ontr ol f unctions f orgroup 4 facsimile apparatus
T. 400 In tro duction t o D ocum ent A rchi -tecture, Transfer and Manipula-tion
Copyright STANDARDS AUSTRALIA/STANDARDS NEW ZEALAND
Users of Standards are reminded that copyright subsists in all Standards Australia and Standards New Zealand publications andsoftware. Except where the Copyright Act allows and except where provided for below no publications or software produced byStandards Australia or Standards New Zealand may be reproduced, stored in a retrieval system in any form or transmitted by anymeans without prior permission in writing from Standards Australia or Standards New Zealand. Permission may be conditional on anappropriate royalty payment. Australian requests for permission and information on commercial software royalties should be directedto the head offi ce of Standards Australia. New Zealand requests should be directed to Standards New Zealand.
Up to 10 percent of t he technical content pages of a Standard may be copied f or use exclusively i n-house by purchasersof the Standard without payment of a royalty or advice t o Standards Australia or Standards New Zealand.
Inclusion of copyright material i n computer software programs is also permitted without royalty payment provided suchprograms are used exclusively in-house by the creators of the programs.
Care should be taken to ensure that material used is from the current edition of t he Standard and that it is updated whenever theStandard is amended or revised. The number and date of the Standard should t herefore be clearly i dentified.
The use of material in print form or in computer software programs to be used commercially, with or without payment, or incommercial contracts is subject t o the payment of a r oyalty. This policy may be varied by Standards Australia or StandardsNew Zealand at any time.
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
7/18
v
CONTENTS
Page
1 Sc ope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 No rmative refe renc es . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.1 Paired Recommendations International Standards equivalent in technical content . . . . 2
2.2 Additional references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 Def in iti ons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4 Relationship with other International Standardized Profiles . . . . . . . . . . . . . . . . . . . . . . . . 4
5 Confo rmance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5.1 Da ta stre am con fo rma nce . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5.2 Implementation conformance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
6 Characteristics supported by this document application profile . . . . . . . . . . . . . . . . . . . . . . 5
6.1 Ov erv iew . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
6.1 .1 Ge neral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
6.1 .2 Fo rma tte d form do cuments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6.1.3 Processable form documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6.1.4 Formatted processable form documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.1 .5 Ge neric-doc uments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.1 .6 Do cument p ro file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.2 Logical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.2 .1 In tro duction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.2.2 Overview of the logical structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6.2.3 Body part of the logical structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6.2.3.1 DocumentLogicalRoot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6. 2.3. 2 Pa ssa ge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6.2.3.3 NumberedSegment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6. 2.3. 4 Nu mber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6. 2.3. 5 Pa ragraph . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6.2.3.6 BodyText, BodyRaster and BodyGeometric . . . . . . . . . . . . . . . . . . . 10
6. 2.3. 7 Fo otn ote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6.2.3.8 FootnoteReference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6. 2.3. 9 Fo otn ote Bo dy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6.2.3.10 FootnoteNumber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6.2.3.11 FootnoteText . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6.2.4 Common content part of the logical structure . . . . . . . . . . . . . . . . . . . . . . . . 12
6. 2.4. 1 Co mmo nCo ntent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
8/18
vi
Page
6. 2.4. 2 Co mmo nTe xt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6. 2.4. 3 Pa geN umber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6. 2.4. 4 Co mmo nRa ster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6.2.4.5 CommonGeometric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6.3 Layout characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6.3.1 Overview of the layout characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6.3 .2 Do cumentLa youtRo ot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6.3 .3 Pa geSet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6.3.4 Page characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6.3.4.1 Page constituents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6. 3.4. 2 Pa ge dimens io ns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6. 3.4. 3 No min al p age s iz es . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6. 3.4. 4 Pa ge offse t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6.3.4.5 Page layout characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6.3.4.5.1 General characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6. 3.4. 5.2 Pa ge la yout A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6. 3.4. 5.3 Pa ge la yout B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6. 3.4. 5.4 Pa ge la yout C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6. 3.4. 5.5 Pa ge la yout D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6.3.5 Body area characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6.3.5.1 General characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6. 3.5. 2 Ba sic Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196.3.5.3 VariableCompositeBody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6. 3.5. 4 Ba sic Flo at . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
6. 3.5. 5 Sn akingC olumn s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
6.3.5.6 SynchronizedColumns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.3.5.7 ColumnVariable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6. 3.5. 8 Co lumn Fixed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6. 3.5. 9 Fo otn ote Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6.3.6 Header and footer area characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.3.6.1 General characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.3.6.2 BasicHeader and BasicFooter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.3.6.3 CompositeHeader and CompositeFooter . . . . . . . . . . . . . . . . . . . . . 27
6.3.6.4 SourcedContentVariable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.3.6.5 ArrangedContentVariable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.3.6.6 SourcedContentFixed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.3.6.7 ArrangedContentFixed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.3.7 GenericBlock and SpecificBlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.4 Document layout characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.4 .1 Flow contro ls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.4.1.1 Allocation of content to page sets . . . . . . . . . . . . . . . . . . . . . . . . . 29
6. 4.1. 2 Pa ge breaks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
6.4.1.3 Allocation of content to body areas . . . . . . . . . . . . . . . . . . . . . . . . 29
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
9/18
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
10/18
viii
Page
6.5.2.8 Image dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
6.5.3 Geometric graphics content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
6.6 Miscellaneous features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
6.6.1 Resource-documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
6.6 .2 Ex ternal d ocume nts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
6.6 .3 Bo rder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
6.6.4 Application comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
6.6.5 Alternative representation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
6.6.6 Automatic numbering mechanisms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
6.6.6.1 Page Numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
6.6.6.2 Segment numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
6.6.6.3 Footnote numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
6.6 .7 Us er re ada ble co mments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
6.6 .8 Us er visible n ame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
6.7 Document management features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
6.7.1 Document constituent information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
6.7.1.1 Presence of document constituents . . . . . . . . . . . . . . . . . . . . . . . . . 50
6.7.1.2 Resource-document information . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
6.7.1.3 External document information . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
6.7.2 Document identification information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
6.7.2.1 Document application profile information . . . . . . . . . . . . . . . . . . . . 50
6.7.2.2 Document architecture class information . . . . . . . . . . . . . . . . . . . . . 506.7.2.3 Content architecture classes information . . . . . . . . . . . . . . . . . . . . . 50
6.7.2.4 Interchange format class information . . . . . . . . . . . . . . . . . . . . . . . 50
6.7.2.5 ODA version information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
6.7.2.6 Document reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
6.7.3 Document default information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
6.7.4 Non-basic characteristics information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
6.7.4.1 Profile character sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
6.7.4.2 Comments character sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
6.7.4.3 Alternative representation character sets . . . . . . . . . . . . . . . . . . . . . 52
6.7 .5 Fo nts l ist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
6.7.6 Document management attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
7 Specification of constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
7.1 In tro duction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
7.1.1 Diagrams of relationships of logical constituents . . . . . . . . . . . . . . . . . . . . . 53
7.1.2 Diagrams of relationships of layout constituents . . . . . . . . . . . . . . . . . . . . . . 54
7.1.3 Not at ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
7.2 Document profile constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
7.2 .1 Mac ro defin itions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
11/18
ix
Page
7.2.2 Constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
7.2.2.1 DocumentProfile { . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
7.3 Logical constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
7.3 .1 Mac ro defin itions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
7.3 .2 Fa cto r cons traints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
7.3.2.1 FACTOR ANY-LOGICAL { . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
7.3.3 Constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
7.3.3.1 DocumentLogicalRoot: ANY-LOGICAL { . . . . . . . . . . . . . . . . . . . 75
7.3.3.2 Passage: ANY-LOGICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
7.3.3.3 NumberedSegment: ANY-LOGICAL { . . . . . . . . . . . . . . . . . . . . . . 77
7.3.3.4 Number: ANY-LOGICAL ( . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
7.3.3.5 Paragraph: ANY-LOGICAL { . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
7.3.3.6 BodyText: ANY-LOGICAL { . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
7.3.3.7 BodyGeometric: ANY-LOGICAL { . . . . . . . . . . . . . . . . . . . . . . . . 79
7.3.3.8 BodyRaster: ANY-LOGICAL { . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
7.3.3.9 Footnote: ANY-LOGICAL { . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
7.3.3.10 FootnoteReference: ANY-LOGICAL { . . . . . . . . . . . . . . . . . . . . . . 81
7.3.3.11 FootnoteBody: ANY-LOGICAL { . . . . . . . . . . . . . . . . . . . . . . . . . 82
7.3.3.12 FootnoteNumber: ANY-LOGICAL { . . . . . . . . . . . . . . . . . . . . . . . 82
7.3.3.13 FootnoteText: ANY-LOGICAL { . . . . . . . . . . . . . . . . . . . . . . . . . . 83
7.3.3.14 CommonContent { . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
7.3.3.15 CommonText { . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
7.3.3.16 PageNumber { . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
7.3.3.17 CommonGeometric { . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
7.3.3.18 CommonRaster { . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
7.4 Layout constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
7.4 .1 Mac ro defin itions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
7.4 .2 Fa cto r cons traints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
7. 4.2. 1 FA CTO R AN Y-L A YO UT { . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
7.4.2.2 FACTOR ANY-PAGE: ANY-LAYOUT { . . . . . . . . . . . . . . . . . . . . 88
7.4.2.3 FACTOR ANY-FRAME-FIXED: ANY-LAYOUT { . . . . . . . . . . . . . 89
7.4.2.4 FACTOR ANY-FRAME-VARIABLE: ANY-LAYOUT { . . . . . . . . . 90
7. 4.2. 5 FA CTO R BL O CK { . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
7.4.3 Constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
7.4.3.1 DocumentLayoutRoot: ANY-LAYOUT { . . . . . . . . . . . . . . . . . . . . 92
7.4.3.2 PageSet: ANY-LAYOUT { . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
7. 4.3. 3 Pa ge: A NY -PA GE { . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
7.4.3.4 RectoPage: ANY-PAGE { . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
7.4.3.5 VersoPage: ANY-PAGE { . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
7.4.3.6 BasicBody: ANY-FRAME-FIXED { . . . . . . . . . . . . . . . . . . . . . . . . 95
7.4.3.7 VariableCompositeBody: ANY-FRAME-FIXED { . . . . . . . . . . . . . . 95
7.4.3.8 BasicFloat: ANY-FRAME-VARIABLE { . . . . . . . . . . . . . . . . . . . . 967.4.3.9 SynchronizedColumns: ANY-FRAME-VARIABLE { . . . . . . . . . . . . 97
7.4.3.10 SnakingColumns: ANY-FRAME-VARIABLE { . . . . . . . . . . . . . . . . 99
7.4.3.11 ColumnVariable: ANY-FRAME-VARIABLE { . . . . . . . . . . . . . . . 100
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
12/18
x
Page
7.4.3.12 ColumnFixed: ANY-FRAME-VARIABLE { . . . . . . . . . . . . . . . . . 102
7.4.3.13 FootnoteArea:ANY-FRAME-VARIABLE { . . . . . . . . . . . . . . . . . . 103
7.4.3.14 BasicHeader: ANY-FRAME-FIXED { . . . . . . . . . . . . . . . . . . . . . 104
7.4.3.15 BasicFooter: ANY-FRAME-FIXED { . . . . . . . . . . . . . . . . . . . . . . 105
7.4.3.16 CompositeHeader: ANY-FRAME-FIXED { . . . . . . . . . . . . . . . . . . 105
7.4.3.17 CompositeFooter: ANY-FRAME-FIXED { . . . . . . . . . . . . . . . . . . 106
7.4.3.18 SourcedContentVariable: ANY-FRAME-VARIABLE { . . . . . . . . . 106
7.4.3.19 ArrangedContentVariable: ANY-FRAME-VARIABLE { . . . . . . . . . 108
7.4.3.20 SourcedContentFixed: ANY-FRAME-VARIABLE { . . . . . . . . . . . 109
7.4.3.21 ArrangedContentFixed: ANY-FRAME-FIXED { . . . . . . . . . . . . . . 110
7.4.3.22 GenericBlock: BLOCK { . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
7.4.3.23 SpecificBlock: BLOCK { . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
7.5 Layout style constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
7.5 .1 Mac ro defin itions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
7.5.2 FACTOR ANY-LAYOUT-STYLE { . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
7.5.3 Constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
7.5.3.1 L-Style1: ANY-LAYOUT-STYLE { . . . . . . . . . . . . . . . . . . . . . . . 112
7.5.3.2 L-Style2: ANY-LAYOUT-STYLE { . . . . . . . . . . . . . . . . . . . . . . . 113
7.5.3.3 L-Style3: ANY-LAYOUT-STYLE { . . . . . . . . . . . . . . . . . . . . . . . 113
7.5.3.4 L-Style4: ANY-LAYOUT-STYLE { . . . . . . . . . . . . . . . . . . . . . . . 114
7.5.3.5 L-Style5: ANY-LAYOUT-STYLE { . . . . . . . . . . . . . . . . . . . . . . . 114
7.5.3.6 L-Style6: ANY-LAYOUT-STYLE { . . . . . . . . . . . . . . . . . . . . . . . 115
7.5.3.7 L-Style7: ANY-LAYOUT-STYLE { . . . . . . . . . . . . . . . . . . . . . . . 1157.5.3.8 L-Style8: ANY-LAYOUT-STYLE { . . . . . . . . . . . . . . . . . . . . . . . 115
7.5.3.9 L-Style9: ANY-LAYOUT-STYLE { . . . . . . . . . . . . . . . . . . . . . . . 115
7.5.3.10 L-Style10: ANY-LAYOUT-STYLE { . . . . . . . . . . . . . . . . . . . . . . 116
7.5.3.11 L-Style11: ANY-LAYOUT-STYLE { . . . . . . . . . . . . . . . . . . . . . . 116
7.6 Presentation style constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
7.6 .1 Mac ro defin itions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
7.6 .2 Fa cto r cons traints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
7.6.2.1 FACTOR ANY-PRESENTATION-STYLE { . . . . . . . . . . . . . . . . . 116
7.6.3 Constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
7.6.3.1 P-Style1: ANY-PRESENTATION-STYLE { . . . . . . . . . . . . . . . . . 117
7.6.3.2 P-Style2: ANY-PRESENTATION-STYLE { . . . . . . . . . . . . . . . . . 118
7.6.3.3 P-Style3: ANY-PRESENTATION-STYLE { . . . . . . . . . . . . . . . . . 118
7.6.3.4 P-Style4: ANY-PRESENTATION-STYLE { . . . . . . . . . . . . . . . . . 119
7.7 Content portion constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
7.7 .1 Mac ro defin itions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
7.7 .2 Fa cto r cons traints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
7.7.2.1 FACTOR ANY-CONTENT { . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
7.7.3 Constituent constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
7.7.3.1 Character-content-portion: ANY-CONTENT { . . . . . . . . . . . . . . . . 1207.7.3.2 Raster-graphics-content-portion: ANY-CONTENT { . . . . . . . . . . . 121
7.7.3.3 Geometric-graphics-content-portion: ANY-CONTENT { . . . . . . . . . 121
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
13/18
xi
Page
8 In terchange fo rmat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
8.1 Interchange format class A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
8.1 .1 In terchange format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
8.1.2 Document application profile object identifier . . . . . . . . . . . . . . . . . . . . . . 122
8.1.3 Encoding of application comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
8.1 .4 Da ta le ngths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
8.2 In terchange format SDIF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
8.2 .1 In terchange format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
8.2.2 Document application profile object identifier . . . . . . . . . . . . . . . . . . . . . . 123
8.2.3 Encoding of application comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
A. 1 Amendments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
A.1.1 Amendments to the base standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
A.1.2 Proposed changes to standards due to defects . . . . . . . . . . . . . . . . . . . . . . 124
A.2 Technical corrigenda . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
A.2.1 Technical corrigenda to this International Standardized Profile . . . . . . . . . . 124
A.3 Versions of the ODA International Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Recommended Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
B.1 Transfer methods for ODA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
B.1.1 Conveyance of ODA over CCITT X.400-1984 . . . . . . . . . . . . . . . . . . . . . . 126
B.1.2 Conveyance of ODA over FTAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
B.1.3 Conveyance of ODA over DTAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
B.1.4 Conveyance of ODA over flexible disks . . . . . . . . . . . . . . . . . . . . . . . . . . 127B. 2 Fo nt refe renc e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
B.3 ISO/IEC 8632 (CGM) constraints for this document application profile . . . . . . . . . . 128
B. 3.1 De limete r eleme nts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
B.3.2 Metafile descriptor elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
B.3.3 Picture descriptor elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
B. 3.4 Co ntrol eleme nts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
B.3.5 Graphical primitive elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
B. 3.6 Attribute eleme nts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
B. 3.7 Ex ternal e le me nts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
B.4 Interoperability with SGML applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
14/18
xii
List of figures
Page
Figure 1 Pa ge la yout typ e A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 2 Pa ge la yout typ e B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 3 Pa ge la yout typ e C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Figure 4 Pa ge la yout typ e D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Figure 5 Example of body area layout for page layout A . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Figure 6 Example of body area layout for page layout B . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Figure 7 Example of body area layout for page layout C and D . . . . . . . . . . . . . . . . . . . . . 22
Figure 8 Examples of the layout of snaking columns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Figure 9 Example of synchronized column layout for page layout A . . . . . . . . . . . . . . . . . . 25
Figure 10 Specification of margins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Figure 11 Code extension features (basic case) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Figure 12 Code extension features (all possible cases) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Figure 13 The body part of the generic logical structure the passage and numbered segment levels53
Figure 14 The body part of the generic logical structure - the paragraph level . . . . . . . . . . . . 54
Figure 15 The common part of the generic logical structure . . . . . . . . . . . . . . . . . . . . . . . . . 54
Figure 16 The layout structure - document root and page sets . . . . . . . . . . . . . . . . . . . . . . . 55
Figure 17 The layout structure - the page structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Figure 18 The layout structure - the header and footer frame structure . . . . . . . . . . . . . . . . . 56
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
15/18
xiii
List of tables
Page
Ta ble 1 No min al p ag e sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Table 2 List of number string identifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Table 3 Symbols to denote shift functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
16/18
xiv
NOTES
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
17/18
1
7/31/2019 As NZS 4246.1-1994 Information Technology - International Standardized Profile FOD26 - Open Document Format
18/18
This is a free preview. Purchase the entire publication at the link below:
Looking for additional Standards? Visit SAI Global Infostore
Subscribe to ourFree Newsletters about Australian Standards in Legislation; ISO, IEC, BSI and more
Do you need to Manage Standards Collections Online?
Learn about LexConnect, All Jurisdictions, Standards referenced in Australian legislation
Do you want to know when a Standard has changed?
Want to become an SAI Global Standards Sales Affiliate?
Learn about other SAI Global Services:
LOGICOM Military Parts and Supplier DatabaseMetals Infobase Database of Metal Grades, Standards and Manufacturers
Materials Infobase Database of Materials, Standards and Suppliers
Database of European Law, CELEX and Court Decisions
Need to speak with a Customer Service Representative - Contact Us
AS/NZS 4246.1:1994, Information technology -International standardized profile FOD26 - Opendocument format: Enhanced document structure -Character, raster graphics and geometric graphics
content architectures Document application profile
http://infostore.saiglobal.com/store?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Newsletters/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Collections/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/StandardsWatch/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Affiliate/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/LOGICOM/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/LOGICOM/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Metals/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Materials/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/European-Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store/getpage.aspx?path=/InformationServices/shop/pages/ContactingUs.htm&utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store/Details.aspx?ProductId=379096&utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store/getpage.aspx?path=/InformationServices/shop/pages/ContactingUs.htm&utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/European-Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Materials/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Metals/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/LOGICOM/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Affiliate/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/StandardsWatch/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Collections/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Newsletters/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSites