Aramco Asia Korea Limited - Saudi Aramco · product shall conform to saudi aramco export packing manual ... 2015 saudi aramco: company general use 1. ... formats, completion, workover

Material Sourcing List

Region 5: Republic of Korea

5

Item Category Material Description Material Long DescriptionMaterial Number

9COM/9CAT

1Chemicals

(Drilling Fluids)

POLYVINYL/POLYACRYLIC

COMPOUNDS TO 400F

ADMIXTURE: DRILLING MUD; 25 KG PAPER SACKS; SHIPMENT OF PRODUCT SHALL

CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; POWDER

FORM,POLYACRYLIC,FOR FILTRATE REDUCER FLUID LOSS ADDITIVE,CO-POLYMER

OF POLYVINYL COMPOUNDS,25 KG OR 50 LB BAG,API 13A,HIGH TEMPERATURE

ENVIRONMENT 150 DEG C (300 DEG F) TO 205 DEG C (400 DEG F), SHIPMENT OF

PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL

NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER)

SHALL BE AS FOLLOWS: 1ST PLY 50 LB MIN. NATURAL KRAFT PAPER (INTERIOR

PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD PLY SEPARATE INNER BAG

LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER LINER (TUBULAR

SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL

THICKNES OF 0.1 MM. 4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB

MIN. NATURAL KRAFT PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE

VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE AND WATER PROOF.

1000021602

Aramco Asia Korea Limited18F, Seoul Finance Center

136 Sejong-Daero, Jung-Gu,

Seoul 100-768, Korea

Phone: +82 (2) 6270-5555

Fax: +82 (2) 6270-5592

Email: [email protected]

2015 1Saudi Aramco: Company General Use




9COM/9CAT

2Chemicals

(Drilling Fluids)LIQUID GILSONITE

GILSONITE: LIQUID GILSONITE; BORE HOLE STABILIZING AND FLUID LOSS

CONTROL AGENT ADMIXTURE DRILLING MUD; BLEND OF DISPERSED COUPLED

GILSONITE AND LIGNITE FORM,SUSPENDED SURFACTANT LIQUID,FOR BOREHOLE

STABILIZING, AND FLUID LOSS CONTROL AGENT PRIMARY FUNCTION IS TO

PREVENT STUCK PIPE, REDUCE FLUID LOSS AND CREATE STRONG BOREHOLE

CONDITIONS WITH EXCEPTIONAL HTHP AND DYNAMIC FLUID LOSS CONTROL,

NON- TOXIC, ENVIRONMENTALLY SAFE ALSO FUNCTIONS AS A SHALE STABILIZER

AND HAS A BROAD PSD FOR SEALING MICRO- FRACTURES. NON SHEENING,55

GAL/DRUM,APPEARANCE, BLACK SUSPENSION.FREEZING POINT, -4 F(-20 C)TO -13

F(-25C). FLASH POINT,F, >200. SOLUBILITY IN WATER, MISCIBLE. LUBRICITY TEST,

TORQ REDUCTION :5% AND 12% AT 4 PPB RESPECTIVELY IN STANDARD SAUDI

ARAMCO WATER BASE MUD SYSTEM, USING OFI MODEL EP/LUBRICITY TESTER.

FILTRATION CONTROL, API FILTRATE LOSS:6.0 ML/30MIN AT 4PPB HTHP FILTRATE

LOSS AT 250 F AND 500 PSI:16 ML/30MIN AT 8PPB SHALE ACCRETION TEST,




9COM/9CAT

3Chemicals

(Drilling Fluids )

RESINATED LIGNITE STABLE TO

204 deg C

ADMIXTURE: DRILLING MUD; 25 KG (50 LB) SACK; SHIPMENT OF PRODUCT SHALL

CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; DRY

POWDER FORM,MODIFIED RESINATED LIGNITE DARK BROWN POWDER,FOR

WATER SOLUBLE FILTRATE REDUCER FOR FLUID LOSS CONTROL AND RHEOLOGY

STABILIZER IN HIGH TEMP WATER BASED MUD WELLS,25 KG OR 55 LB BAG,SG:

1.32-1.35, COMPATIBLE USE WITH LIGNOSULFONATE AND LIGNITES,

MAGNESIUM AND CHLORIDE, NORMAL TREATMENT:2-6 LB/BBL FOR FLUID LOSS

CONTROL AT TEMPERATURE APPROACHING 400 DEG F (204 DEG C),THE

SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING

MANUAL NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG

(CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50 LB MIN. NATURAL KRAFT PAPER

(INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD PLY SEPARATE

INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER

LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A

MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 50 LB MIN. NATURAL KRAFT

PAPER. 5TH PLY 60 LB MIN. NATURAL KRAFT PAPER WET STRENGTH (EXTERIOR

PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE

AND WATER PROOF.

1000021675

4Chemicals

(Drilling Fluids)ZINC OXIDE

ADMIXTURE: DRILLING MUD; 50 LB BAG; ADMIXTURE DRILLING MUD; FINE

POWDER FORM,ZINC OXIDE (ZNO), 90% (MINIMUM) PURE, SP. GR.,5.5,FOR

HYDROGEN SULFIDE SCAVENGER FOR DRILL PIPE CORROSION PROTECTION IN

FRESH WATER OR BRINE FOR DRILLING & COMPLETION OPERATIONS,25 KG OR 55

LB BAGS,API 13A.

1000021671

5Chemicals

(Drilling Fluids)MUTUAL SOLVENT

AGENT: WELL STIMULANT; SURFACE TENSION REDUCER; SOLUBLE IN

HYDROCARBONS; DISPERSIBLE IN FRESH AGENT WELL STIMULANT; FOR SURFACE

TENSION REDUCER FOR HYDROFLUORIC ACID SOLUTION ADDITIVES,ETHYLENE

GLYCOL MONOBUTYL ETHER MUTUAL SOLVENT,LIQUID FORM,55 GAL

DRUM,SOLUBLE IN HYDROCARBONS, DISPERSIBLE IN FRESH WATER, ACID &

BRINE, 150 DEG F FLASH POINT (TOC).

1000021973





9COM/9CAT

6Chemicals

(Drilling Fluids )AMINE CORROSION INHIBITOR

INHIBITOR: CORROSION; 55-GAL DRUM. INHIBITOR; 55 GAL DRUM,A BLEND OF

AMINES AND IMADAZOLINES FUNCTION GROUPS, OIL SOLUBLE /WATER

DISPERSIBLE CORROSION INHIBITOR, AMINE BASEDAMINE BASED,

RECOMMENDED FOR USE IN HIGH TEMPERATURE, HIGH PRESSURE

ENVIRONMENTS UP TO 350-400 DEG F PROVIDES EXCELLENT CORROSION

PROTECTION IN SOUR H2S, OR SWEET CO2 OIL AND GAS WELLS. DISPERSIBLE IN

FRESH, BRACKISH OR BRINE WATER. PACKER FLUID AND CORROSION INHIBITOR.

1000022135

7Chemicals

(Drilling Fluids )LOW TOXICITY BASED OIL

KEROSENE, LOW TOXICITY, ODORLESS ADDITIVE DRILLING FLUID; CLEAR LIQUID,

FREE FROM SUSPENDED MATTER FORM,KEROSENE, LOW TOXICITY, ODORLESS

BASE OIL ADDITIVE,FOR AA OIL-BASED DRILLING FLUIDS,LOW AROMATIC

OIL,BULK DELIVERY,LOW TOXICITY OIL COMPATIBLE WITH ALL OIL-BASED

DRILLING FLUIDS ADDITIVES (EMULSIFIERS, ORGANOPHILIC CLAYS, AND FILTRATE

CONTROL AGENTS) SPECIFIC GRAVITY @ 15 DEG C .77- 79 (ASTM D 1298), FLASH

POINT: MORE THAN 185 DEG F (85 DEG C) (ASTM D 93), ANILINE POINT: MORE

THAN 167 DEG F (75 DEG C) (ASTM D 611), TOTAL AROMATICS: LESS THAN . 5%

VOL (ASTM D 1319), OLEFINS CONTENT: NIL PPM, BENZENE CONTENT: NIL PPM,

POLYNUCLEAR AROMATIC: NIL PPM, LC50: MORE THAN 100000 PPM. (MYSID

SHRIMP NINETY-SIX HOUR BIOASSAY TEST).

1000022138

8Chemicals

(Drilling Fluids)THINNER OBM

ADDITIVE DRILLING FLUID; LIQUID FORM,POLYOLEFIN/ORGANIC SULFONATE

BLEND, FATTY ACID DERIVATIVES OR OTHER CHEMICAL THAT DO SAME

FUNCTION.,FOR TO LOWER REHEOLOGICAL PROPERTIES FOR SYNTHETIC OR OIL

BASE FLUIDS.,55 GALLON DRUM,APPEARANCE: AMBER LIQUID, COLOUR: DARK

AMBER, ODOUR/TASTE: SLIGHT, S.G: 0.9-0.96, INSOLUBLE, FLASH POINT: MORE

THAN 190 F DEG.

1000823699

9Chemicals

(Drilling Fluids)OIL WETTING AGENT

ADMIXTURE, DRILLING MUD: INVERTED EMULSION MUD COMPONENTS,

DRILTREAT (STABILIZER), AMBER-COLOR VISCOUS ADMIXTURE DRILLING MUD;

VISCOUS LIQUID, AMBER COLOR FORM,ORGANIC SURFACTANT OIL-WETTING

AGENT,FOR OIL BASE MUDS,5 GAL /PAIL,AN ORGANIC SURFACTANT OIL-WETTING

AGENT FOR OIL BASE MUDS. ITS PRIMARY FUNCTION IS TO ACT AS AN OIL-WET

WEIGHTING MATERIAL AND DRILL SOLIDS TO PREVENT WATER WET SOLIDS, TO

IMPROVE FILTERATION CONTROL, RHEOLOGICAL STABILITY AND EMULSION

STABILITY. NORMAL TREATMENTS RANGE 0.25 2.0 LBS/BBL DIRECTLY TO THE

SYSTEM AND IT IS TEMPERATURE STABLE GREATER THAN 350 DEG F (176 DEG C).

PHYSICAL APPEARANCE: AMBER COLOR, VISCOUS LIQUID. SG: 0.93 1.0. FLASH

POINT: > 200 DEG F (93 DEG C) BY PMCC.

1000022171





9COM/9CAT

10Chemicals

(Drilling Fluids)ORGANOPHILIC LIGNITE

ADMIXTURE, DRILLING MUD: INVERTED EMULSION MUD COMPONENTS OIL-

DISPERSIBLE ORGANOPHILIC LEONARDITE 25 KG (50 LB) ADMIXTURE DRILLING

MUD; 25 KG (55 LB) BAG,INVERTED EMULSION MUD COMPONENTS, OIL-

DISPERSIBLE ORGANOPHILIC LEONARDITE, 25 KG (55 LB) BAG: MOISTURE GRATER

THAN 8% WT. PARTICLE SIZE 100% WT PASSING THROUGH 70 US MESH

IMPURITIES (SAND, LIME, GYPSUM-..ETC) 2% WT, MAX.

1000022172

11Chemicals

(Drilling Fluids)SECONDARY EMULSIFIER


POLYAMINATED FATTY ACID & PARTIAL AMIDE OF ADMIXTURE DRILLING MUD;

BLEND OF POLYAMINATED FATTY ACID & PARTIAL AMIDE OF POLYAMINE WITH

METHANOL,FOR SECONDARY EMULSIFIER AND WETTING AGENT FOR INVERTED

EMULSION DRILLING FLUIDS,55 GAL PER DRUM,SECONDARY EMULSIFIER AND

WETTING AGENT FOR INVERTED EMULSION DRILLING FLUIDS. A BLEND OF

POLYAMINATED FATTY ACID AND PARTIAL AMIDE OF POLYAMINE WITH

METHANOL, AUTHORIZED SAUDI ARAMCOS PERSONNEL WILL CARRY OUT

SAMPLING AND TESTING AS NEEDED. SPECIFIC GRAVITY @ 77 DEG F (25 DEG C)

0.95 - 0.96 FLASH POINT: HIGHER THAN 149 DEG F (65 DEG C) ACTIVE

INGREDIENTS: A. FATTY ACID & AMINE DERIVATIVES 65 - 70% B. ASPHALTIC-TYPE

MATERIAL NONE C. ACID NUMBER, 45 - 50 MG KOH/G.

1000022173

12Chemicals

(Drilling Fluids)PRIMARY EMULSIFIER


OXIDIZED TALL OIL & POLYAMINATED FATTY ACID, CLEAR, ADMIXTURE DRILLING

MUD; CLEAR FORM,A BLEND OF OXIDIZED TALL OIL AND POLYAMINATED FATTY

ACID,FOR PRIMARY EMULSIFIER FOR INVERTED EMULSION DRILLING FLUIDS,55

GAL PER DRUM,SPECIFIC GRAVITY @ 77 DEG F (25 DEG C) 0.94 - 0.95 FLASH

POINT: HIGHER THAN 149 DEG F (65 DEG C) ACTIVE INGREDIENTS: A: OXIDIZED

TALL OIL & FATTY ACID 65 - 70% B: ASPHALTIC-TYPE MATERIAL NONE C: ACID

NUMBER, 80 - 85 MG KOH/G.

1000022175

13Chemicals

(Drilling Fluids)LIQUID SPOTTING FLUID

ADMIXTURE, DRILLING MUD: INVERTED EMULSION MUD COMPONENTS, TO FREE

STUCK PIPES (EMULSIFIER), SPECIAL BLEND OF LIQUID, ADMIXTURE DRILLING

MUD; LIQUID FORM,SPOTTING FLUID,FOR SOAK SOLUTION FOR FREEING STUCK

PIPE,ORGANIC CHEMICAL CONCENTRATE OF EMULSIFIERS AND LUBRICANTS,208

L OR 55 GAL DRUM,CONCENTRATE TO BE MIXED WITH DIESEL OIL OR MINERAL

OIL TO FORM STABLE INVERT EMULSION TO HELP FREE DIFFERENTIALLY STUCK

PIPE. FLASH POINT: >190 DEG F.

1000022178





9COM/9CAT

14Chemicals

(Drilling Fluids)FIBER, SWEEPING AGENT

ADMIXTURE: DRILLING MUD; WELLBORE CLEANING AGENT DRY PILLS, TREATED

POLYMERIZED SYNTHETIC FIBER; HOLE CLEANING AGENT ADMIXTURE DRILLING

MUD; DRY FORM,TREATED SYNTHETIC POLYPROPYLENE FIBER,FOR

TRANSPORTING DRILL CUTTINGS METAL SHAVINGS AND OTHER DEBRIS OUT OF

WELLBORE WHILE DRILLING,15 LBS PAIL,EASILY DISPERSABLE IN ALL DRILLING

FLUIDS, NON TOXIC, NON-CORROSIVE, NON-MAGNETIC, CHEMICALLY INERT AND

TEMPERATURE STABLE. COMPATIBLE IN WATER, DIESEL AND MINERAL OIL

FLUIDS. SPECIFIC GRAVITY, 0.9.

1000720919

15Chemicals

(Drilling Fluids)

LUBRICANT - HIGH PH AND

DIVALENT BRINES

ADMIXTURE DRILLING MUD; CLEAR LIQUID FORM,WATER SOLUBLE

LUBRICANT,FOR REDUCES TORQUE, DRAG AND FRICTION IN WATER BASED

DRILLING MUDS,ND OF SURFACTANT MIXTURES POLYOLS DESIGNED FOR USE AS

MIUM LUBRICANT COMPATIBLE IN HIGH SALINE FLUIDS INCLUDING SATURATED

NACL, KCL, NABR, K-FORMATE CALCIUM CHLORIDE FLUIDS WITHOUT GREASING

OUT AND/OR CHEESING. STABLE OVER WIDE RANGE OF TEMPERATURE UP TO

325 F DEG. THE NORMAL (PMCC).

1000757580

16Chemicals

(Drilling Fluids)

LUBRICANT SALT WATER MUD

AND BRINE

LUBRICANT; DRILLING MUD, ADDITIVE TYPE,AMBER LIQUID FORM,55

GAL/DRUM,LUBRICANT FOR SALT WATER BASED MUD AND BRINES, DISPERSED,

SEA WATER, SALT SATURATED, FORMATS, COMPLETION, WORKOVER FLUIDS.

USED WITH BRINES, ALSO, RECOMMENDED FOR DRILL-IN FLUIDS CONTAINING

HIGH AMOUNT OF SIZEABLE CALCIUM CARBONATE, SODIUM CHLORIDE OR

CALCIUM CHLORIDE.PHYSICAL STATE @ 20 C DEG: AMBER COLOR, FAINT ODOR,

POUR POINT IS -10 C DEG MAX, SP. GR. 1.002 G/CC, VISCOSITY @ 40 C DEG IS 120

MM2/S, FLASH POINT 230 C DEG, INSOLUBLE IN WATER, DOES NOT FORM

GREASING AND IT DOES NOT PHASE OUT. BOTTOM HOLE TEMP. LIMIT: 160 C

DEG(320 F), PH LIMIT MAX 10.5, REDIAGREEN EME SALT IS A MIXTURE OF FATTY

ACID, C1618 AND C18-UNSATURATED COMPOUNDS WITH 2,2,2-NITRILOTRI-

ETHANOL AND FATTY ACIDS, ESTERS WITH POLYOL. OTHER ASSOCIATED

ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY

AFFECTED FLUID PROPERTIES.

1000774613

17Chemicals

(Drilling Fluids)OIL IN WATER EMULSIFIER

ADMIXTURE DRILLING MUD; THICK LIQUID FORM,FOR EFFECTIVELY EMLSIFIES

HYDROCARBONS IN BOTH FRESH & SALT WATER. USE IN LOW DENSITY OIL IN

WATER BENTONITE MUD EMULSION,55 GAL (208 LITER) DRUM,OTHER

ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR

ADVERSELY AFFECT FLUID PROPERTIES.

1000779780





9COM/9CAT

18Chemicals

(Drilling Fluids)MODIFIED NON-IONIC STARCH

ADMIXTURE DRILLING MUD; WHITE, FREE-FLOWING POWDER FORM,STABILIZED

NON-IONIC STARCH DERIVATION,FOR TO CONTROL HIGH PRESSURE AND HIGH

TEMPERATURE FILTRATION CONTROL AND MINIMIZE DAMAGE TO THE

PRODUCTIVE FORMATION,MODIFIED STARCH 60-100%, SOLID, WHITE, SG 1.5,

STABILITY TEMPERATURE: 250 DEG F, BIODEGRADABLE, SOLUBLE IN WATER,50 LB

(22.7 KG) SACK,ENHANCES THE LOW SHEAR RATE VISCOSITY OF A FLUID

CONTAINING XANTHAN GUM BIO-POLYMER. POLYMER COMBINATION IS

SYNERGISTIC AND YIELDS IMPROVED STATIC SUSPENSION. FLUID COMPOSITIONS

MIXED WITH N-DRIL HT PLUS FILTRATION CONTROL AGENT CAN BE USED TO

DRILL INTO PAY ZONES AND UNDER REAM. IT CAN ALSO BE USED AS 'PRE' AND

'POST' GRAVEL PACK FLUID AND AS LOST CIRCULATION PILLS. SUITABLE FOR ALL

WATER-BASED DRILLING FLUIDS, WORKOVER AND COMPLETION FLUIDS

INCLUDING SEAWATER, POTASSIUM CHLORIDE, MAGNESIUM CHLORIDE SODIUM

CHLORIDE, SODIUM BROMIDE, CALCIUM BROMIDE AND ZINC BROMIDE: RESISTS

CALCIUM CONTAMINATION OVER A WIDE PH RANGE, SOLUBLE IN ACIDS AND

OXIDIZERS CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME,

MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER.

1000788390

19Chemicals

(Drilling Fluids)

CALCIUM CARBONATE FLAKE

FINE

ADMIXTURE DRILLING MUD; FINE WHITE FLAKES FORM,SIZED CALCIUM

CARBONATE FLAKES,FOR USED AS BRIDGING AGENT TO CONTROL DRILLING

FLUID CIRCULATION LOSSES ESPECIALLY IN GAS DRILLING,CALCIUM CARBONATE

60-100 WT% AND CRYSTALLINE SILICA UP TO 0.1 WT%,MULTI-WALLED 50 LB PER

BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY(10-15% HCL)99%

MIN.

1000813534

20Chemicals

(Drilling Fluids)


MEDIUM

ADMIXTURE DRILLING MUD; MEDIUM WHITE FLAKES FORM,SIZED CALCIUM




BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY(10-15% HCL)99%

MIN.

1000813690

21Chemicals

(Drilling Fluids)


COARSE

ADMIXTURE DRILLING MUD; COARSE WHITE FLAKES FORM,SIZED CALCIUM




BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY (10-15% HCL) 99%

MIN.

1000813535





9COM/9CAT

22Chemicals

(Drilling Fluids)

TEMPERATURE

EXTENDER/STABILIZER

ADDITIVE DRILLING FLUID; LIQUID FORM,AMINOETHANOL,FOR POLYMER

TEMPERATURE EXTENDER/STABILIZER FOR WATER BASED DRILLING AND

COMPLETION FLUIDS BY REDUCING THE RATE OF BREAKDOWN OF POLYMERS BY

SLOWING/PREVENTING THE THERMAL DEGRADATION OF THE POLYMERS. THIS

GIVES A PRONOUNCED IMPROVEMENT IN TEMPERATURE STABILITY, ENABLING

POLYMER FLUIDS TO BE USED IN HOTTER WELLS. THE TEMPERATURE STABILITY

INCREASE BY MARGIN OF UP TO 70 DEG F. IT IS PARTICULARLY SUITED FOR USE IN

DRILLING, COMPLETION, WORKOVER AND PACKER FLUIDS.,55 GAL PER

DRUM,PPEARANCE: LIQUID COLOUR : COLORLESS GRAVITY :1.0- 1.02 ADD

SOLUBILITY IN WATER: SOLUBLE IN WATER BOILING POINT (C):> 142 C FLASH

POINT (C) : > 96 C PH : 11-12,CONTAINER MUST BE PROPERLY LABELED WITH

VENDOR'S NAME, MANUFACTURER'S NAME, GRAVITY: 1.0 - 1.02 LOCATION,

PRODUCTION DATE AND BATCH NUMBER. SAUDI SOLUBILITY IN WATER:

ARAMCO'S PERSONNEL WILL SOLUBLE IN WATER, BOILING CARRY OUT PROPER

SAMPLING POINT: > 142 DEG C, FLASH AND TESTING AS NEEDED. POINT: > 96

DEG C, PH: 11 - 12.

1000829739

23Chemicals

(Drilling Fluids)Temperature Stabilizer

ADDITIVE; DRILLING MUD TYPE,FOR FREE RADICAL SCAVENGER AND

TEMPERATURE STABILIZER,COLORLESS LIQUID FORM,200

LITERS/DRUM,FUNCTIONS BY SCAVENGING FREE RADICALS AND SLOWS DOWN

THERMAL DEGRADATION OF POLYMERIC COMPONENTS, SUCH AS XANTHAN

GUM, PAC AND STARCH, IN THE DRILLING FLUID WHICH ALLOWING THE

TEMPERATURE STABILITY TO BE EXTENDED BY UP TO 50 DEG F. NORMAL

TREATMENT: 2.0 TO 4.0 LB/BBL FLASH POINT : > 195 DEG. F, SPECIFIC GRAVITY :

1.05-1.15, SOLUBILITY : SOLUBLE IN WATER, ACTIVES % W/W 68 - 72, SG @ 20 C

1.05 - 1.15.

1000823316

24Chemicals

(Drilling Fluids)

POLYSTYRENE COPOLYMER

BEADS

ADMIXTURE: DRILLING MUD; DRY, LUBRA-GLIDE BEADS; DIVINYL BENZENE

COPOLYMER; DRY, COARSE GRADE; FOR REDUCING TORQUE AND DRAG.

ADMIXTURE DRILLING MUD; DRY, COARSE FORM,AA POLYSTYRENE COPOLYMER

BEAD,FOR SOLID LUBRICANT, TO REDUCE TORQUE AND DRAG WHILE DRILLING.

CHEMICALLY INERT,22.7 KGS (55 LBS) /SACK,PARTICLE SIZE DISTRIBUTION RANGE:

100 TO 1000 MICRON. COMPRESSIVE STRENGTH: 16,000 PSI. SOFTENING

TEMPERATURE: > 260 C DEG.

1000720918





9COM/9CAT

25Chemicals

(Drilling Fluids)

GUAR GUM POWDER FORM 25

KG BAG

ADDITIVE DRILLING FLUID; CREAMY COLOURED POWDER FORM,PURE GUAR

GUM,FOR USED AS COMPETITIVE SUPPLEMENTARY VISCOSIFIER FOR QUICK

VISCOSITY SWEEPS BUILDER WHILE DRILLING SURFACE HOLES WITH WATER.,25

KG METAL BAGS,IT IS PARTICULARLY USEFUL FOR OFFSHORE DRILLING, AS IT CAN

BE ADDED DIRECTLY TO SEAWATER, , WHICH ELIMINATES THE NEED FOR LARGE

QUANTITIES OF FRESH WATER AS WELL AS THE TIME REQUIRED TO PREHYDRATE

BENTONITE. IT IS AN UNTREATED GUAR GUM AND IS NON-IONIC IN NATURE. IT

SHOWS EXCELLENT PERFORMANCE OVER A WIDE PH RANGE. IT'S

RECOMMENDED TO ADD BIOCIDE, IF GUAR GUM SOLUTION KEPT OVER A PERIOD

OF TIME. APPEARANCE: CREAMY COLOURED POWDER, ODOR: BEAN LIKE,

MOISTURE: 8.0% (MAXIMUM), PH: 8.0, ASH :1% (MAXIMUM), PARTICLE SIZE

THROUGH 200 MESH (75 MICRON): 95% (MINIMUM), BROOKFIELD VISCOSITY :

8000 CP (MINIMUM), (1% SOLUTION IN DISTILLED WATER AT 25 DEG. C, AFTER 24

HOURS (SPINDLE #4, 20 RPM), FANN VISCOSITY INITIAL 10 MINUTE: 42 CP

(MINIMUM), (2.00 GM / 350 MLS, IN SEA WATER, @ 511 SEC-1, F1 SPRING. SEA

WATER: 41.95 GM NACL IN 1000 MLS DISTILLED WATER.

1000824113

26Chemicals

(Drilling Fluids)POLYETHER POLYOL DEFOAMER

ADDITIVE DRILLING FLUID; LIQUID FORM,POLYETHER POLYOL,FOR DEFOAMER

USED IN BOTH FRESHWATER AND SALTWATER DRILLING FLUIDS SYSTEMS,5

GALLON PAIL,DEFOAMER USED IN BOTH FRESHWATER AND SALTWATER

DRILLING FLUIDS SYSTEMS,EFFECTIVE FOR REDUCING FOAM CAUSED BY WATER

SOLUBLE GLYCOL PRODUCTS, CONTAINS NO OIL FOR CAUSING SHEEN OR SLICK

ON WATER SURFACE, NORMAL TREATMENT ,0.05 GAL BBL,CLEAR LIQUID, MILD

ODOR DENSITY 1003 KG/M3 8.36 LB/GAL, POUR POINT 26 DEG C, FLASH POINT

ADDITIVE, DRILLING FLUID, LIQUID, POLYETHER POLYOL DEFOAMER USED IN

BOTH FRESHWATER AND SALTWATER DRILLING FLUIDS SYSTEMS, 5 GALLON PAIL,

DEFOAMER USED IN BOTH FRESHWATER AND SALTWATER DRILLING FLUIDS

SYSTEMS, EFFECTIVE FOR REDUCING FOAM CAUSED BY WATE.

1000815463

27Chemicals

(Drilling Fluids)CRUDE OIL EMULSION BRAKER

ADDITIVE DRILLING FLUID; LIQUID AQUEOUS SOLUTION FORM,MIXTURE OF

ORGANIC NOMINAL PIPE SIZE: 5-1/8 IN,FOR EMULSION BREAKER, BREAKS DOWN

CRUDE FOR THE SEPARATION OF BOTH OIL AND SOLIDS,ORGANIC,

BIODEGRADABLE, CITRUS ODOR,55-GALLON DRUM,MEDIUM BLUE AQUEOUS

SOLUTION, SG:1.2-1.4, PH:7-9, VISCOSITY:100 CST,FREEZE POINT: 26 DEG F,

SOLUBLE IN FRESH AND BRINE WATER, APPLIED BY BATCH OR DOWN HOLE

INJECTION METHODS.

1000813531





9COM/9CAT

28Chemicals

(Drilling Fluids)CRUDE OIL VISCOSITY REDUCER

ADDITIVE DRILLING FLUID; LIQUID, AQUEOUS SOLUTION FORM,MIXTURE OF

ORGANIC COMPOUNDS AND ENZYMES,FOR VISCOSITY REDUCING AGENT,

RETURNS HEAVY HYDROCARBONS TO AN OIL PHASE,ORGANIC, BIODEGRADABLE,

CITRUS ODOR,55-GALLON DRUM,MEDIUM BLUE AQUEOUS SOLUTION, SG:1.2-

1.4, PH:7-9, VISCOSITY:200 CST,FREEZE POINT: 27 DEG F, SOLUBLE IN FRESH &

BRINE WATER AND OIL SOLUBLE, APPLIED BY BATCH OR DOWN HOLE INJECTION

METHODS, ++DESIGNED FOR THE TREATMENT OF DIFFICULT PARAFFIN AND

ASPHALTENE PROBLEMS BREAK DOWN THE LONG CHAIN AND CYCLIC PARAFFIN'S

(ALONG WITH OTHER LONG CHAIN HYDROCARBONS SUCH AS ASPHALTENES)

ALLOWING THEM TO RETURN TO THE OIL PHASE PERMANENTLY.

1000813532

29Chemicals

(Drilling Fluids)EC-101 cutting wash

ADDITIVE DRILLING FLUID; AQUEOUS SOLUTION FORM,MIXTURE OF ORGANIC

COMPOUNDS AND ENZYMES,FOR A NON-TOXIC ,NON- HAZARDOUS,NON-

FLAMMABLE NON-CORROSIVE,100% BIODEGRADABLE,WATER BASED PRODUCT

WHICH IS UTILIZED IN BUT NOT LIMITED TO THE FOLLOWING APPLICATION,DRILL

CUTTING DECONTAMINATION, TREATMENT AND DISPOSAL, HYDROCARBON

CONTAMINATED SOLIDS TREATMENT AND DE- OILING OPERATION ON ONSHORE

AND OFFSHORE OIL DRILLING RIGS,PRODUCTION PLLATFORMS AND VESSELS , OIL

SPILL CLEANUP OPERATION AND PROCESS PLANT CLEAN UP . THE PRODUCT

LEAVES NO PETROCHEMICAL DISTILLATES AFTER PROPER

TREATMENT,APPEARANCE: MEDIUM BLUE AQUEOUS SOLUTION, SPECIFIC

GRAVITY: 1.2 - 1.4 (WATER=1), PH: 7 - 9 POUR POINT : 26 DEG F FREEZE POINT: 26

F SOLUBILITY : FRESH AND BRINE WATER,55-GAL DRUM.

1000820609

30Chemicals

(Drilling Fluids)ALL TEMP

ADDITIVE; DRILLING MUD TYPE,FOR USED AS HT THINNER IN WIDE RANGE OF

WATER-BASE.,SOLID - WHITE POWDER FORM,25.0 LB/BAG,USED AS HT THINNER

IN WIDE RANGE OF WATER-BASE. DOES NOT CONTAIN HEAVY METALS/CHROME

OR REQUIRE SODIUM HYDROXIDE FOR ACTIVATION AND STABLE UP TO

TEMPERATURE 400 F DEG(204 DEG). TREATMENT RANGE FROM 0.5 LB/BBL TO

3.0 LB/BBL, ODOURLESS, PH : 7-9 (1%AQ. SOLN.), SOLUBLE IN WATER, SHEAR

STRENGTH, LB/100 FT, 32 MAX PLASTIC VISCOSITY, CP, 32 MAX, YIELD POINT,

LB/100 FT, 32 MAX, 10 SECOND GEL, LB/100 FT, 12 MAX, 10 MINUTE GEL,

LB/100 FT, 38 MAX, 30 MINUTE FILTRATE, ML, 48 MAX.

1000823315





9COM/9CAT

31Chemicals

(Drilling Fluids)CHEMTROL X

ADDITIVE; ADDITIVE: DRILLING MUD TYPE,FOR PROVIDES HPHT FILTRATION

CONTROL AND RHEOLOGICAL STABILITY IN WIDE RANGE OF WATER-BASE

MUD.,SOLID - TAN TO BLACK POWDER FORM,50.0 LB/BAG,BLEND OF

DERIVATIZED ACRYLIC COPOLYMER DEFLOCCULANT AND CAUSTICIZED LIGNITE

PROVIDES HPHT FILTRATION CONTROL AND RHEOLOGICAL STABILITY IN WIDE

RANGE OF WATER-BASE MUD. INITIAL TREATMENTS OF 2.0 TO 6.0 LB/BBL.

NORMAL TREATMENT LEVELS ARE BASED ON TYPES OF WBM & NEEDED.

APPEARANCE : SOLID, TAN TO BLACK POWDER, ODOR: EARTHY, SPECIFIC

GRAVITY: 1.5 , PARTIALLY SOLUBLE IN WATER. SPECIFIC GRAVITY: 1.5 PH: 9-10

SOLUBILITY : PARTIALLY SOLUBLE IN WATER.

1000823317

32Chemicals

(Drilling Fluids)KEM-SEAL PLUS

ADDITIVE; ADDITIVE: DRILLING MUD TYPE,FOR HTHP FILTRATION CONTROL

ADDITIVE WORK WITH ALL TYPES OF WATER BASED FLUIDS,SOLID - WHITE

POWDER FORM,25.0 LB/BAG,HTHP FILTRATION CONTROL ADDITIVE WORK WITH

ALL TYPES OF WATER BASED FLUIDS, TEMPERATURES UP TO 500 DEG. F.

TREATMENT RANGE VARIES BASED ON FILTRATE VALUE DESIRED AND WELL

TEMPERATURE, A REASONABLE RANGE WILL BE 1 TO 6 LB/BBL.IS, SHOULD BE

ADDED SLOWLY TO AVOID HIGH RAISE IN VISCOSITY. APPEARANCE : SOLID,

WHITE POWDER, ODOR:SLIGHT, SPECIFIC GRAVITY :1300 KG/M3 @ 16 DEG. C,

SOLUBILITY : SOLUBLE IN WATER, SALT/HARD WATER PERFORMANCE, FILTRATE,

ML: 17 MAX AGING PERFORMANCE, FILTRATE, ML: 19 MAX.

1000823318

33Chemicals

(Drilling Fluids)Temperature Stabilizer

ADDITIVE; DRILLING MUD TYPE,FOR FREE RADICAL SCAVENGER AND

TEMPERATURE STABILIZER,COLORLESS LIQUID FORM,200

LITERS/DRUM,FUNCTIONS BY SCAVENGING FREE RADICALS AND SLOWS DOWN

THERMAL DEGRADATION OF POLYMERIC COMPONENTS, SUCH AS XANTHAN

GUM, PAC AND STARCH, IN THE DRILLING FLUID WHICH ALLOWING THE

TEMPERATURE STABILITY TO BE EXTENDED BY UP TO 50 DEG F. NORMAL

TREATMENT: 2.0 TO 4.0 LB/BBL FLASH POINT : > 195 DEG. F, SPECIFIC GRAVITY :

1.05-1.15, SOLUBILITY : SOLUBLE IN WATER, ACTIVES % W/W 68 - 72, SG @ 20 C

1.05 - 1.15.

1000823316





9COM/9CAT

34Chemicals

(Drilling Fluids)COASTAL SPOT

ADDITIVE DRILLING FLUID; LIQUID FORM,BLEND OF POLYALPHAOLEFIN ( PAO)

SYNTHETIC HYDROCARBON, EMULSIFIERS, ACTIVATORS AND INITIATORS,FOR

SPOTTING FLUID FOR FREEING STUCK PIPE,PAO BASED PRODUCT WITH

PATENTED ADDITIVES,275 GALLON IBC CONTAINER,ADDITIVE, DRILLING FLUID:

LIQUID, BLEND OF POLYALPHAOLEFIN (PAO) SYNTHETIC HYDROCARBON,

EMULSIFIERS, ACTIVATORS AND INITIATORS, SPOTTING FLUID FOR FREEING

STUCK PIPE, PAO BASED PRODUCT WITH PATENTED ADDITIVES, 275 GALLON IBC

CONTAINER,CLEAR YELLOW LIQUID: SG:0.95-1. 05: DISPERSIBLE IN WATER: POUR

POINT: -20 DEG F, FLASH POINT GREATER 300 DEG F: REPLACEMENT FOR DIESEL

AND MINERAL OIL BASED SPOTTING FLUIDS: DEHYDRATES AND CRACKS FILTER

CAKE TO ALLOW PENETRATION AROUND THE PIPE WITH PAO TO FREE STUCK

PIPE.

1000813125

35Chemicals

(Drilling Fluids)SX PLUS, 160 MICRONS

ADDITIVE DRILLING FLUID; BLACK SOLID POWDER PARTICULATES OF SPECIFIC

SIZED GRINDS FORM,HEAT TREATED CARBON BASED MATERIAL,FOR USED FOR

SEEPAGE CONTROL, BRIDGING, PLUGGING, OIL & WATER MUDS, LUBRICITY,

SEALING OF DEPLETED ZONES, PREVENTION OF STUCK PIPES,GRAPHITE

PARTICLES 40 MESH TO GRATER THAN 200 MESH ( 425 TO > 75

MICRONS),ADDITIVE, DRILLING FLUID: BLACK SOLID POWDER PARTICULATES OF

SPECIFIC SIZED GRINDS, HEAT TREATED CARBON BASED MATERIAL, USED FOR

SEEPAGE CONTROL, BRIDGING, PLUGGING, OIL & WATER MUDS, LUBRICITY,

SEALING OF DEPLETED ZONES PREVENTION OF STUCK PIPES, GRAPH GREY TO

BLACK POWDER SG 1.5 FLASH POINT > 350 DEG (F): MELTING POINT > 500 DEG

(F): PARTICLE SIZE:D90-245, D50-160, D10-111 NEGLIGIBLE SOLUBILITY IN WATER

AND OIL: USED FOR SEALING POROUS SANDS AND OTHER FORMATION TO

REDUCE DIFFERENTIAL PRESSURE TRANSFER.

1000813126

36Chemicals

(Drilling Fluids)Cross-LINK LCM Retarder

ADMIXTURE DRILLING MUD; CLEAR LIQUID FORM,ADDITIVE RETARDER,FOR

CROSS-LINKING X-LINK POLYMER FOR MIXING VISCOUS PILLS FOR CURING FLUID

CIRCULATION LOSS DURING DRILLING OPERATION,CROSS LINKING MATERIAL FOR

X-LINK POLYMER,5 GALLONS PER CAN,SPECIFIC GRAVITY 1.323 @20 DEG C,

BOILING POINT 221 DEG F (105 DEG C), MOLECULAR WEIGHT 112.0, SOLUBLE IN

WATER SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT

PACKING MANUAL.

1000757568





9COM/9CAT

37Chemicals

(Drilling Fluids)Cross-LINK LCM

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,LOST CIRCULATION

MATERIAL,ECTED BY TEMPERATURE AND EXTENDERS. ND OF HIGH MOLECULAR

RETARDERS LULOSE FIBERS AND PARTICLE SS-LINKING AGENTS, G. THE CROSS-

LINKING IS PERATURE TOLERANT GEL-LIKE FORM STIFF, DURABLE AND PAPER

BAG,INSOLUBLE IN WATER. SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI

ARAMCO EXPORT PACKING MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT

NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE

IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN SHALL BE PRINTED ON

THE CONTAINER. THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG


(INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER 3RD PLY 80 LB MIN.

NATURAL KRAFT PAPER (EXTERIOR PLY).

1000757567

38Chemicals

(Drilling Fluids)

BIG BAG BARITE TRANS 0.99 M3

ORANGE

BIG BAG SYSTEM COMPONENTS: CONTAINER: BIG BAG; 35 CU FT CAPACITY;

ORANGE COLOR; (FOR BARYTES). CONTAINER; BARYTE TRANSPORT TYPE,0.99 M3

(35 CU FT),BODY AND CONE SECTION: M049 LID SECTION: M426 INLET AND

OUTLET SPOUT: M326 HEAVY DUTY WIRE RING: INSERTED IN THE TOP WELDED

LID MADE FROM WIO2 MATERIAL,ORANGE,BIG BAG SYSTEM COMPONENT, IBC

TRANSPORT CONTAINERS LTD THERE ARE TWO (2) CERTIFICATE NUMBERS FOR

THE BAGS, AND THE FOLLOWING MANDATORY TEST REQUIREMENTS MUST BE

MET: A) STANDARD: BS-EN 1898-2001, CLASS: HEAVY DUTY THERMOPLASTIC,

CERTIFICATE NUMBER: 101043, APPROVED RATING: SWL: 2500KG/8:1 SF. B)

STANDARD: EFIBCA 003: 1985, CLASS: HEAVY DUTY THERMOPLASTIC,

CERTIFICATE NUMBER: 101161E APPROVED RATING: SWL: 2500KG/8:1 SF

1000029881

39Chemicals

(Drilling Fluids)

BIG BAG BENTONITE TRANS 0.99

M3 BLUE

BIG BAG SYSTEM COMPONENTS: CONTAINER: BIG BAG; 35 CU FT CAPACITY; BLUE

COLOR; (FOR BENTONITE). CONTAINER; BENTONITE TRANSPORT TYPE,0.99 M3

(35 CU FT),BODY AND CONE SECTION: M047 LID SECTION: M425 INLET AND

OUTLET SPOUT: M325 HEAVY DUTY WIRE RING: INSERTED IN THE TOP WELDED

LID MADE FROM WIO2 MATERIAL,BLUE,BIG BAG SYSTEM COMPONENT, IBC

TRANSPORT CONTAINERS LTD THERE ARE TWO (2) CERTIFICATE NUMBERS FOR

THE BAGS, AND THE FOLLOWING MANDATORY TEST REQUIREMENTS MUST BE

MET: A) STANDARD: BS-EN 1898-2001, CLASS: HEAVY DUTY THERMOPLASTIC,

CERTIFICATE NUMBER: 101043, APPROVED RATING: SWL: 2500KG/8:1 SF. B)

STANDARD: EFIBCA 003: 1985, CLASS: HEAVY DUTY THERMOPLASTIC,

CERTIFICATE NUMBER: 101161E APPROVED RATING: SWL: 2500KG/8:1 SF

1000029882





9COM/9CAT

40Chemicals

(Drilling Fluids)BIG BAG, ZIP NYLON

BIG BAG SYSTEM COMPONENTS: ZIP TIES: NYLON; BIG BAG; TYPE 120-R. . TIE; ZIP

TYPE,NYLON,BIG BAG SYSTEM COMPONENT, IBC TRANSPORT CONTAINERS LTD

TYPE "120-R".

1000029930

41Chemicals

(Drilling Fluids)BIG BAG, LIFTING

BIG BAG SYSTEM COMPONENTS: LIFTING RING: BIG BAG; TYPE 109.5. . RING; BIG

BAG LIFTING TYPE,BIG BAG SYSTEM COMPONENTS, IBC TRANSPORT CONTAINERS

LTD, TYPE 109.5.

1000029887

42Chemicals

(Drilling Fluids)PENETREX - ROP enhancer

ADMIXTURE DRILLING MUD; LIQUID FORM,ISOMERISED OLEFINS 60-90%,FOR

DESIGNED TO INCREASE RATE OF PENETRATION (ROP)IN WATER BASED DRILLING

FLUID SYSTEMS, USED IN MEDIUM TO HARD SHALES,ISOMERISED OLEFINS 60-

90%,55 GAL/DRUM,RECOMMENDED INITIAL TREATMENT OF 1% TO 2% BY

VOLUME SHOULD BE MADE BY INJECTION TO THE CIRCULATING SYSTEM.

ADDITIONAL CAN BE ADDED UP TO 5-6% BY VOLUME DEPENDING ON THE ROP

ACHIEVED, AMOUNT OF SHALE ENCOUNTERED, TYPE OF MUD SYSTEM AND THE

INTERVAL LENGTH COLORLESS TO LIGHT YELLOW, MILD ODOR,SG 0.84, FREEZING

POINT-10 DEG C, BOILING POINT >270OC, FLASH POINT > 136 DEG C,INSOLUBLE

IN WATER SOLUBLE IN HYDROCARBONS SHIPMENT OF PRODUCTS MUST

CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.

1000775552

43Chemicals

(Drilling Fluids)MAX-PLEX

ADMIXTURE DRILLING MUD; BROWN POWDER DUST FORM,RESIN AND

ALUMINATE COMPOUND,FOR FOR REDUCING PORE PRESSURE TRANSMISSION

AND HPHT FILTRATION RATES,ALUMIUM COMPLEX-40-60%&OXYALKYLATED

ALKANOL -1-5% BY WT,50 LB BAG,USED IN FRESH UP TO SATURATED SALT WATER

BASE MUD SYSTEMS FOR STABILIZING SHALE AND PREVENTION OF BIT AND

BOTTOM HOLE ASSEMBLY BALLING BROWN COLOR, ODORLESS, SG 1.85,PH 11-12

(1% SOLUTION) TEMP. STABILITY300 DEG F, SOLUBLE IN WATER, INSOLUBLE IN

ORGANIC SOLVENTS SHIPMENT OF PRODUCTS MUST CONFORM TO SAUDI

ARAMCO EXPORT PACKING MANUAL.

1000775553

44Chemicals

(Drilling Fluids)MAX-GUARD

ADMIXTURE DRILLING MUD; LIQUID FORM,POLYAMINE,FOR PRIMARY CLASS

HYDRATION AND SWELLING SUPPRESSANT,AQUEOUS SOLUTUTION OF AMINE

ACID COMPLEX,55 GAL DRUM,THAT PROVIDES INHIBITION OF REACTIVE CLAY

AND GUMBO BY SUPPRESSING HYDRATION AND SWELLING WITHIN THE CLAY

MINERAL PLATELETS AMBER COLOR, MILD ODOR,SG 1.07-1.09, PH 6.8-7.2 (2%

SOLUTION),SOLUBLE IN WATER,FLASH POINT >93OC SHIPMENT OF PRODUCTS

MUST CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.

1000775554





9COM/9CAT

45Chemicals

(Drilling Fluids)CLAY-SEAL

ADMIXTURE CEMENT; FOR CLAYSEAL SHOULD BE ADDED DIRECTLY TO THE

SYSTEM.THIS SHOULD OCCUR AFTER PREHYDRATING.,TYPE ADMIXTURE, CEMENT

HYDRO GUARD, CLAYSEAL,ETHOXYLATED POLYAMINE,5 GAL GALLON

PAIL,APPEARANCE: TRANSPARENT YELLOW LIQUID, ODOR: AMINE, SPECIFIC

GRAVITY: 1GM/CC, SOLUBILITY: SOLUBLE IN WATER. CLAYSEAL SHOULD BE

ADDED DIRECTLY TO THE SYSTEM.THIS SHOULD OCCUR AFTER PREHYDRATING

ALL BENTONITE ADDITIONS AND ADDING FLUID LOSS ADDITIVES.INITIAL

TREATMENTS IN NONDISPERSED SYSTEMS MAY CAUSE SLIGHT FLOCCULATION

AND MAY REQUIRE A THINNER. CLAYSEAL ADDITIONS WILL BE 4-8 LB/BBL AND

FOR BEST RESULTS A MINIMUM OF 4 LB/BBL OF CLAYSEAL IS REQUIRED.

1000812301

46Chemicals

(Drilling Fluids)GLYCOL - GEM GP

ADMIXTURE DRILLING MUD; DARK BROWN LIQUID FORM,POLYALKYLENE GLYCOL

OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR

ADVERSELY AFFECT FLUID PROPERTIES.,FOR USED TO IMPROVE LUBRICITY, SHALE

STABILITY AND REDUCE BIT BALLING. NORMAL TREATMENT,POLYALKYLENENE

GLYCOL,55 GALLON DRUM,CONCENTRATION IS 2-6% BY VOLUME IN A MUD

SYSTEM BUT OPTIMUM CONCENTRATION SHOULD BE IDENTIFIED ON A CASE BY

CASE BASIS. APPEARANCE YELLOW TO BROWN LIQUID, ODOR MILD, SPECIFIC

GRAVITY 1.01, BOILING POINT (C) 126 C, SOLUBILITY IN WATER MISCIBLE.


MANUAL.

1000812016

47Chemicals

(Drilling Fluids)BORE-HIB

ADDITIVE DRILLING FLUID; DARK YELLOW LIQUID FORM,GLYCERINE AND SILICATE

SALT OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL

AND/OR ADVERSELY AFFECT FLUID PROPERTIES.,FOR USED AS STABILIZER WHILE

DRILLING HIGHLY REACTIVE SHALE AND CLAYS. BORE-HIB CAN BE DEPLETED

WHEN DRILLING ANHYDRITE, GREEN. CEMEN,GLYCERINE AND SILICATE SALT

MIXTURE,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: DARK YELLOW LIQUID,

GLYCERINE AND SILICATE SALT OTHER ASSOCIATED ELEMENTS MUST NOT BE

HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES USED

AS STABILIZER WHILE DRILLING HIGHLY REACTIVE SHALE AND CLAYS. BORE-HIB

CAN. APPEARANCE DARK YELLOW SHIPMENT OF PRODUCT SHALL CONFORM TO

SAUDI ARAMCO EXPORT PACKING MANUAL.

1000812015





9COM/9CAT

48Chemicals

(Drilling Fluids)LC-LUBE, 300-450 MICRON

ADMIXTURE DRILLING MUD; SOLID BLACK OF SPECIFIC SIZED GRINDS

PARTICULATES FORM,PHITE H RESILIENCY SYNTHETIC,FOR WELLBORE

STRENGTHENING. DEPLETED D IN OIL OR WATER BASE MUD ES, PREVENTION OF

STUCKPIPE,50 LB (22.7 KG)/ SACK,1ST PLY OTHER ASSOCIATED ELEMENTS MUST

NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID

PROPERTIES. APPEARANCE: GRAY TO BLACK POWDER. ODOR: ODORLESS. SG: 1.75-

2.5 GM/CC. SOLUBILITY: INSOLUBLE IN WATER & ACID. PARTICLE SIZE: D50: 300-

450 MICRON. RESILIENCY: GREATER THAN 80% AT 10,000 PSI. CONTAINER IS A

MULTI-WALLED SACK - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND

PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT

PAPER (EXTERIOR PLY).

1000758660

49Chemicals

(Drilling Fluids)LC-LUBE Fine, 165 MICRON

ADMIXTURE DRILLING MUD; SOLID BLACK OF SPECIFIC SIZED GRINDS TICULATES

FORM,LC-LUBE FINE, GRAPHITE, SYNTHETIC,FOR USE FOR SEEPAGE CONTROL

BRIDGING, PLUGGING, OIL MUDS, WATER MUDS, LUBRICITY, SEALING OF

DEPLETED ZONES, PREVENTION OF STUCK PIPE,LC-LUBE FINE SYNTHETIC

GRAPHITE,50 LB (22.7 KG)/ SACK,1ST PLY OTHER ASSOCIATED ELEMENTS MUST

NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID

PROPERTIES. APPEARANCE: GRAY TO BLACK POWDER ODOR: ODORLESS SP. GR.:

2.25 GM/CC FREEZING POINT: NA MELTING POINT: >5000 F DEG SOLUBILITY:

INSOLUBLE IN WATER & ACID PARTICLE SIZE: D90 300 D50 165 D10 75

CONTAINER IS A MULTI-WALLED SACK - 75 LB MIN. NATURAL KRAFT PAPER

(INTERIOR PLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB

MIN. NATURAL KRAFT PAPER (EXTERIOR PLY).

1000758661

50Chemicals

(Drilling Fluids)MAX-SHIELD

ADMIXTURE DRILLING MUD; MILKY, WHITE LIQUID FORM,MAX-SHIELD LATEX, 60

WT%,FOR SEALING POLYMER IN WATER-BASED DRILLING FLUID SYSTEM,LATEX,

60 WT%,55 GAL/DRUM,USED TO CREATE A SEMI-PERMEABLE MEMBRANE AT

BOREHOLE, IMPROVE HOLE STABILITY AND REDUCE PORE PRESSURE

TRANSMISSION WHICH HELPS PREVENT STUCK PIPE WHEN DRILLING DEPLETED

ZONES. OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL

AND/OR ADVERSELY AFFECT FLUID PROPERTIES. NORMAL TREATMENT: 2-5 % BY

VOLUME. APPEARANCE: MILKY, WHITE LIQUID. ODOR: MILD PH: 6-9 SP. GR.: 1.05

GM/CC FREEZING POINT: 32 F DEG (0 C DEG) BOILING POINT: 212 F DEG (100 C

DEG) FLASH POINT: NA RELATIVE DENSITY: 1025 KG/M3 @ 16 C DEG. SOLUBILITY:

MISCIBLE WITH WATER VOC WEIGHT:




9COM/9CAT

51Chemicals

(Drilling Fluids)STEEL SEAL

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,GRAPHITE,FOR LOSS

CIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND FRACTURED

FORMATIONS,BLACK ANGULAR MATERIAL CARBON BASED MATERIAL,50 LB

BAG,FOR USE WITH SYNTHETIC AND WATER-BASED DRILLING FLUIDS IMPARTS

LUBRICITY FOR WATER BASED FLUIDS TO CONTROL SEEPAGE AND LOST

CIRCULATION 15-25 LB/BBL USED AS A BACKGROUND CONCENTRATION, 50-100

LB/BBL LCM PILL FOR SPOTTING OVER THIEF ZONES, 3-10 LB/BBL FOR LUBRICITY

IN WATER BASED FLUIDS. ODORLESS, SG 1.75, FLASH POINT >356OC,INSOLUBLE

IN WATER, PARTICLES SIZE PERCENT < 40 MESH: 100 PERCENT > 200 MESH: 95

CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME,


THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE

AS FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND

PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN.

1000775555

52Chemicals

(Drilling Fluids)STEEL SEAL Fine

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,GRAPHITE,FOR LOSS

CIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND MICRO-FRACTURED

FORMATIONS,GRAY-BLACK ANGULAR MATERIAL CARBON BASED MATERIAL,50 LB

SACK,FOR USE WITH SYNTHETIC AND WATER-BASED DRILLING FLUIDS IMPARTS

LUBRICITY FOR WATER BASED FLUIDS TO CONTROL SEEPAGE AND LOST

CIRCULATION 15-25 LB/BBL USED AS A BACKGROUND CONCENTRATION, 60-110

LB/BBL LCM PILL FOR SPOTTING OVER THIEF ZONES, 4-10 LB/BBL FOR LUBRICITY

IN WATER BASED FLUIDS. ODORLESS, SG 1.75,FLASH POINT >356OC,INSOLUBLE

IN WATER, PARTICLES SIZE DRY SIEVE ANALYSIS:FINE 99% MIN & REGULAR 95%

MIN. THROUGH (30 MESH) DRY SIEVE ANALYSIS:FINE 40% MIN & REGULAR 2%

MAX THROUGH (200 MESH) MEDIAN PARTICLE SIZE: 80 CONTAINER MUST BE

PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME,

LOCATION, PRODUCTION DATE AND BATCH NUMBER. THE CONSTRUCTION OF

THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY -

75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN.

NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR

PLY) SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT SAMPLING AND TESTING AS

NEEDED.

1000775556





9COM/9CAT

53Chemicals

(Drilling Fluids)STEEL SEAL 50

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SYNTHETIC GRAPHITE,FOR

LOSS CIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND MICRO-

FRACTURED FORMATIONS,SYNTHETIC GRAPHITE,50 LB. BAG,FOR USE WITH

SYNTHETIC AND WATER-BASED DRILLING FLUIDS IMPARTS LUBRICITY FOR WATER

BASED FLUIDS GREY-BLACK ANGULAR MATERIAL,ODORLESS, SG 1.75, INSOLUBLE

IN WATER, MEDIAN PARTICLE SIZE D-50: 50 15-25 LB/BBL AS A BACKGROUND

CONCENTRATION FOR SEEPAGE AND LOST CIRCULATION CONTROL. 60-110

LB/BBL LCM PILL FOR SPOTTING OVER THIEF ZONESOR ON BOTTOM PRIOR TO

TRIPS AND 4-10 LB/BBL FOR LUBRICITY IN WATER-BASED FLUIDS. CONTAINER

MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME,

LOCATION, PRODUCTION DATE AND BATCH NUMBER. THE CONSTRUCTION OF

THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY -

75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN.

NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR

PLY)

1000775557

54Chemicals

(Drilling Fluids)CLAY-GRABBER

ADMIXTURE DRILLING MUD; LIQUID FORM,NON-IONIC LIQUID POLYMER,FOR

FLOCCULANT AND CLAY ENCAPSULATOR. IT STOPS SHALE DISPERSION AND HELPS

STABILIZE SHALES IN THE WELLBORE,HIGH MOLECULAR WEIGHT, NON-IONIC

LIQUID POLYMER,5 GAL PAIL,OPAQUE LIQUID, OFF-WHITE COLOR, PH:6.5-7.5,

CONCENTRATION 30-40 (1% ACTIVE POLYMER), SG 1.02 -1.06, STABILITY UP TO

300 DEG F, IMIISCIBLE IN WATER FOR RESULTS CLAY GRABBER FLOCULANT

SHOULD BE MIXED THROUGH A HIGH SHEAR HOPPER. 0.5-1.0 LB/BBL IN THE

HYDRO-GUARD SYSTEM. 0.25-0.5 LB/BBL FOR CLEAR WATER DRILLING. 0.5-1.0

FOR TROUBLESOME SHALES IN A WATER- BASED SYSTEM.

1000775561

55Chemicals

(Drilling Fluids)CLAY-SYNC

ADMIXTURE DRILLING MUD; GRANULES FORM,NON-IONIC 100% ACTIVE DRY

POLYMER,FOR A CLAY INHIBITOR FOR WATER BASED DRILLING FLUIDS. SHALE

STABILIZER AND WELLBORE LUBRICATOR,LOW MOLECULAR WEIGHT, NON-IONIC

DRY POLYMER,50 LB. BAG,POLYMER ADHERES TO SURFACE OF REACTIVE CLAYS

PREVENTING DISPERSION AND HYDRATION, SHOULD BE MIXED THROUGH THE

HOPPER IN THE HYDRO-GUARD SYSTEM. IF SALINITY >140,000 PPM USE 2 LB/BBL,

IF SALINITY IS




9COM/9CAT

56Chemicals

(Drilling Fluids)MICROWASH - OHR-759

ADMIXTURE DRILLING MUD; LIQUID FORM,N-BUTANOL,FOR USED AS A CO-

SURFACTANT TO REMEDIATE WELLBORE DAMAGE,SURFACTANT BLEND WITH N-

BUTANOL 100%,55 GALLON DRUM,APPEARANCE CLEAR, COLORLESS

LIQUID,ODOR SWEET, RELATIVE DENSITY:810 KG/M3 BOILING POINT:118 DEG

C,FLASH POINT:37 DEG C, SOLUBLE IN WATER,AUTO-IGNITION TEMPERATURE

343C. ++THIS ITEM IS ONE OF COMPONENT USED TO FORMULATE THE MICRO-

WASH SYSTEM FOR WELLBORE REMEDIATION AND REMOVE DAMAGE TO THE

RESERVOIR DRILLED WITH INVERT EMULSION FLUIDS. ++ CONTAINER MUST BE

PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME,

LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S

PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED.

MICRO-WASH ACID SYSTEM CONSISTS BAKER ++ HUGHES PRODUCTS, PRIME-743,

PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC

ACID AND FORMIC ACID.

1000811421

57Chemicals

(Drilling Fluids)MICROWASH - OHR-AC

ADMIXTURE DRILLING MUD; LIQUID FORM,ACID CORROSION INHIBITOR,FOR

USED AS AN ACID CONTROL ADDITIVE IN THE MICRO-WASH ACID

SYSTEM,,CONTAINING PROPARGYL ALCOHOL 5-10%,METHANOL 30-60% AND

BLEND OF NON-IONIC SURFACTANTS,55 GALLON DRUM,APPEARANCE:CLEAR

AMBER LIQUID,ODOR:SWEET,SPECIFIC GRAVITY:885-897 KG/M3,FLASH POINT:10-

15.6 DEG C, POUR POINT:LESS THAN -20.2 DEG C,SOLUBLE IN WATER, PH:4-6(5%

IN 25% IPA/75% WATER),FLASH POINT:10-15.6 DEG C (TAG CLOSED CUP),VAPOUR

PRESSURE:85MM HG AT 21 DEG C, ++ THIS ITEM PROVIDES CORROSION

RESISTANCE WHILE REMEDIATING WELLBORE DAMAGE AND DESTROYING OIL-

MUD FILTER CAKE, THE PRODUCT IS BIODEGRADABLE, ACID DISPERSIBILE AND IS

TOLERANT FOR SALTS PRESENT IN ACIDS.CONTAINER MUST BE PROPERLY

LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION,

PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL

CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. ++ MICRO-WASH ACID

SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-

770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC

ACID.

1000811422





9COM/9CAT

58Chemicals


ADMIXTURE DRILLING MUD; LIQUID FORM,BLEND OF NON-IONIC AND ANIONIC

SURFACTANTS.FOR TO DESTROY INVERT EMULSION IN OIL-BASED MUD FILTER

CAKE AND SOILDS,SODIUM TRIDECYL ETHER SULFATE 10-20% & OTHER

COMPONENTS,275 GALLON IBC CONTAINER,ADMIXTURE, DRILLING MUD: LIQUID,

BLEND OF NON-IONIC AND ANIONIC SURFACTANTS., TO DESTROY INVERT

EMULSION IN OIL-BASED MUD FILTER CAKE AND SOILDS, SODIUM TRIDECYL

ETHER SULFATE 10- 20% & OTHER COMPONENTS, 275 GALLON IBC CONTAINER,

APPEARANCE:TRANSPARENT, YELLOW LIQUID, ODOR:DISINFECTANT,SPECIFIC

GRAVITY: 1086.5 KG/M3,. FLASH POINT >100C SOLUBLE IN WATER, PH: 7.8 AT

25 DEG C, VISCOSITY: 28. 0CST AT 40C.THIS MATERIAL IS USED AS ONE OF

SURFACTANT COMPONENT IN THE MICRO-WASH ACID SYSTEM IT IS BLENDED OF

NON-IONIC AND ANIONIC SURFACTANTS WITH NEAR ZERO INTERFACIAL.

CONTAINER MUST BE PROPERLY LABELED WITH:VENDOR'S NAME


SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING

AS NEEDED. MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS:

PRIME-743, PRIME-760, PRIME-770 ,OHR- 759, OHR-AC, OHR-757, OHR- 750 &

GLACIAL ACETIC ACID AND FORMIC ACID.

1000811423





9COM/9CAT

59Chemicals



SURFACTANTS,FOR TO REMEDIATE WELLBORE DAMAGE, DESTROY INVERT

EMULSION IN OIL-BASED MUD FILTER CAKE AND WATER-WET METAL

SURFACES,ALKYPHENYL OXIDE SULPHONATES,275 GALLON IBC

CONTAINER,ADMIXTURE, DRILLING MUD: LIQUID, BLEND OF NON-IONIC AND

ANIONIC URFACTANTS, TO REMEDIATE WELLBORE DAMAGE, DESTROY INVERT

EMULSION IN OIL-BASED MUD FILTER CAKE AND WATER-WET METAL SURFACES,

ALKYPHENYL OXIDE SULPHONATES , 275 GALLON IBC CONTAINER ,

APPEARANCE:CLEAR ,YLLOW- ORANGE LIQUID, ODOR:DISINFECTANT SPECIFIC

GRAVITY:1108 KG/M3,. BOILING POINT:212?F , FLASH POINT >100C, SOLUBLE IN

WATER : PH:5.5 AT 25?C, VISCOSITY:69CST AT 40C PROPRIETARY BLEND THAT IS

CUSTOM DESIGNED TO DISPERSE FILTER CAKE AS A COMPONENT IN MICRO-

WASH ACID SYSTEM TO REMOVE OBM SKIN DAMAGE AND ALLOW THE

RESERVOIR TO FLOW AT MAXIMUM POTENTIAL. IT IS BLEND OF NON-IONIC AND

ANIONIC SURFACTANTS WITH NEAR ZERO INTERFACIAL TENSION. NORMAL

TREATMENT: 10 - 25% BY VOLUME ++ CONTAINER MUST BE PROPERLY LABELED

WITH: VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION

DATE AND BATCH NUMBER.

1000811424

60Chemicals

(Drilling Fluids)MICROWASH - PRIME-743

ADMIXTURE DRILLING MUD; LIQUID FORM,GLYCEROL-BELEND OF NON-IONIC

SURFACTANTS,FOR USED FOR REMOVE OIL-WET SOLIDS FROM THE WELLBORE

AND WATER-WET METAL SURFACES.,GLYCEROL, BLEND OF NON-IONIC AND

ANIONIC SURFACTANTS,5 GALLON CAN,++ APPEARANCE OPAQUE YELLOW-

ORANGE LIQUID, PH 7.6, SPECIFIC GRAVITY 1015 KG/M3, BOILING POINT 100

DEG, FLASH POINT GREATER THAN 93 DEG C, WATER SOLUBLE ++ FULLY

COMPATIBLE AT ALLRATIOS WITH OIL MUD SPACERS AND OIL-NORMAL ONE OF

THE SURFACTANT COMPONENTS IN THE MICRO-WASH ACID SYSTEM ++

CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME,

MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER


AS NEEDED. CONTAINER MUST BE PROPERLY LABELED ++MICRO-WASH ACID

SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-

770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC

ACID.

1000811425





9COM/9CAT

61Chemicals


ADMIXTURE DRILLING MUD; LIQUID FORM,2-BUTOXYETHANOL > 60% AND

SURFACTANTS,FOR USED TO CREATE AN EFFECTIVE PUSH PILL TO PILOT THE

DISPLACEMENT AND ACT AS NON EMULSIFIER,2-BUTOXYETHANOL > 60% AND A

BLEND OF UNSATURATED AROMATIC HYDROCARBONS, NON-IONIC SURFACTANT

AND ANIONIC SURFACTANTS,5 GALLON CAN,APPEARANCE CLEAR,`LIGHT YELLOW

LIQUID, ODOR MILD, SWEET SPECIFIC GRAVITY:920 KG/M3 FLASH POINT

64C(PMCC),PH 4.7-5.7(75%IPA/25% WATER), SOLUBLE IN WATER, VISCOSITY: 95-

105 CPS AT 20 DEG C ++ USED FOR REMOVING OIL-WET DEBRIS FROM THE

METAL SURFACES, FULLY COMPATIBLE AT ALL RATIOS WITH OIL MUD SPACERS

AND ALL OIL- BASED DRILLING FLUIDS.ONE OF THE SURFACTANT COMPONENTS

IN THE MICRO-WASH ACID SYSTEM ++ CONTAINER MUST BE PROPERLY LABELED

WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE

AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER

SAMPLING AND TESTING AS NEEDED CONTAINER MUST BE PROPERLY LABELED ++

MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743,

PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC

ACID AND FORMIC ACID.

1000811426

62Chemicals



SURFACTANTS,FOR TO CREATE AN EFFECTIVE FOLLOW-UP DISPLACEMENT

NEWTONIAN CLEANING PILL USED TO REMOVE OIL-WET SOLIDS,BLEND OF NON-

IONIC AND ANIONIC SURFACTANTS,5 GALLON CAN,APPEARANCE: TURBID,`

YELLOW-ORANGE LIQUID ODOR: MILD, SWEET SPECIFIC GRAVITY: 1098 KG/M3,

FLASH POINT: GREATER THAN 100 DEG C(TCC),WATER SOLUBLE ++ FULLY

COMPATIBLE AT ALL RATIOS WITH OIL MUD SPACERS AND ALL OIL- BASED

DRILLING FLUIDS. ONE OF THE SURFACTANT COMPONENTS IN THE MICRO-WASH

ACID SYSTEM ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S

NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH

NUMBER. ++ SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING

AND TESTING AS NEEDED. CONTAINER MUST BE PROPERLY LABELED ++ MICRO-

WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-

760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID

AND FORMIC ACID.

1000811427





9COM/9CAT

63Chemicals

(Drilling Fluids)ACETIC ACID > 96%

ADDITIVE DRILLING FLUID; CLEAR,COLORLESS LIQUID FORM,ACETIC ACID >

96%,FOR TO ACIDIZE SOLUBLE CALCIUM CARBONATE PARTICLES IN WELLBORE

REMEDIATION,ACETIC ACID > 96%,275 GALLON IBC TOTE,CLEAR LIQUID, STRONG

PUNGENT VINEGAR ODOR DENSITY 1050 KG/M3, BOILING POINT 117 DEG C,

FLASH POINT >102.2C, SOLUBLE IN WATER,SOLUBLE AUTO-IGNITION

TEMPERATURE 799C. ACETIC ACID IS A COMPONENT OF THE BAKER HUGES

MICRO- WASH SYTEM TO IMPROVE WELL PRODUCTIVITY. IT IS A CARBOXYLIC

ACIDS WITH THE MOLECULAR FORMULA OF CH3COOH, NORMAL TREATMENT 1 -

15 % BY VOLUME. 275 GALLON IBC.

1000814796

64Chemicals

(Drilling Fluids)FORMIC ACID >90%

ADDITIVE DRILLING FLUID; CLEAR,COLORLESS LIQUID FORM,FORMIC ACID

>90%,FOR TO ACIDIZE SOLUBLE CALCIUM CARBONATE IN MICRO-WASH,FORMIC

ACID >90%,55 GALLON DRUM,ADDITIVE DRILLING FLUID CLEAR,COLORLESS

LIQUID FORM,FORMIC ACID >90%,FOR TO ACIDIZE SOLUBLE CALCIUM

CARBONATE IN MICRO-WASH, FORMIC ACID >90%,55 GALLON DRUM,ADDITIVE,

DRILLING FLUID: CLEAR,COLORLESS LIQUID, FORMIC ACID >90%, TO ACIDIZE

SOLUBLE CALCIUM CARBONATE IN MICRO-WASH, FORMIC ACID >90%, 55

GALLON DRUM , ADDITIVE, DRILLING FLUID: CLEAR,COLORLESS LIQUID,FORMIC

ACID >90%, TO ACIDIZE SOLUBLE CALCIUM CARBONATE IN MICRO-WASH,

FORMIC ACID >90%, 55 GALLON DRUM.

1000811877

65Chemicals

(Drilling Fluids)N-FLOW - LOSURF-259

ADDITIVE DRILLING FLUID; LIQUID FORM,ISOPROPANOL AND HEAVY AROMATIC

PETROLEUM NAPTHA,FOR BREAKS EMULSION IN OIL BASE MUD FILTER CAKE,

USED IN PUSH PILL SPACER PRIOR TO SPOT N-FLOW 325 TREATMENT FILTER CAKE

REMOVAL,5 GALLON CAN,ADDITIVE, DRILLING FLUID: LIQUID, ISOPROPANOL AND

HEAVY AROMATIC PETROLEUM NAPTHA, BREAKS EMULSION IN OIL BASE MUD

FILTER CAKE, USED IN PUSH PILL SPACER PRIOR TO SPOT N-FLOW 325

TREATMENT FOR FILTER CAKE REMOVAL, ISOPROPANOL AND HEAVY AROMATIC

PETROLEUM NAPTHA, 5 GALLON CAN, APPEARANCE: CLEAR LIGHT AMBER,

ALCOHOL ODOR, SPECIFIC GRAVITY: 0.92 @ 20 DEG C BOILING POINT: 92 DEG C,

DISPERSES IN WATER. ++ PREVENTS OIL WET FINES FROM STABILIZING

EMULSIONS, NORMAL USE CONCENTRATION: 0.1 - 2.0 % V/V. NONIONIC

NONEMULSIFIER BLEND, PRIMARILY DESIGNED FOR ACIDIZING LIMESTONE,

DOLOMITE AND SANDSTONE FORMATION & FRACTURE TREATMENT.

1000811529





9COM/9CAT

66Chemicals

(Drilling Fluids)Mutual Solvent - MUSOL

ADDITIVE DRILLING FLUID; LIQUID FORM,ETHYLENE GLYCOL MONOBUTYL ETHER

SOLVENT,FOR REDUCE OIL WET TENDENCIES AND IMPROVE THE OVERALL

WETTING CONDITION OF THE FORM,ETHYLENE GLYCOL MONOBUTYL ETHER,55

GALLON DRUM,ADDITIVE, DRILLING FLUID: LIQUID, ETHYLENE GLYCOL

MONOBUTYL ETHER SOLVENT, USED WITH NONANIONIC SURFACTANT (LOSURF-

259) TO REDUCE OIL WET TENDENCIES AND IMPROVE THE OVERALL WETTING

CONDITION OF THE FORM, ETHYLENE GLYCOL MONOBUTYL ETHER, 55 GALLON

DRUM , APPEARANCE: COLORLESS LIQUID, MILD ODOR, SPECIFIC GRAVITY: 0.9 @

20 DEG C BOILING POINT: 171 DEG C SOLUBLE IN WATER. ++ PREVENTS OIL WET

FINES FROM STABILIZING' EMULSIONS, NORMAL USE CONCENTRATION: 10 %

V/V. PRIMARILY USED DURING ACIDIZING OPERATIONS IN SILICATE FORMATION.

++ CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME,

MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER


AS NEEDED ++ N-FLOW 325 SYSTEM CONSISTS OF HALLIBURTON BAROID

PRODUCTS LOSURF-259, MUSOL, N-FLOW 325 & BDF-443.

1000811540

67Chemicals

(Drilling Fluids)N-FLOW 325

ADDITIVE DRILLING FLUID; LIQUID FORM,DIETHYLENE GLYCOL DIFORMATE,FOR

RELEASED FORMIC DISSOLVES CALCIUM CARBONATE TO REMOVE FILTER CAKE

AND REPAIR FILTER CAKE AND REPAIR MUD DAMAGE,DIETHYLENE GLYCOL

DIFORMATE,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: LIQUID, DIETHYLENE

GLYCOL DIFORMATE , RELEASED FORMIC DISSOLVES CALCIUM CARBONATE TO

REMOVE FILTER CAKE AND REPAIR MUD DAMAGE, DIETHYLENE GLYCOL

DIFORMATE, 55 GALLON DRUM , APPEARANCE: LIGHT YELLOW LIQUID,ODOR:

CHARACTERISTIC, SPECIFIC GRAVITY 1.2 GM/CC, BOILING POINT:240 DEG C,

PH:2.8 SOLUBLE IN WATER ++ COMPATIBLE WITH OIL, FORMATION BRINE AND

DRILL- IN FLUID BASE OIL (DIESEL), THE CHEMICAL IS DISSOLVED IN THE CARRIER

BRINE, BECAUSE THE ACID LIBERATION ACTION IS SLOW. ACID WILL BE

GENERATED OVER THE SUBSEQUENT PERIOD OF TIME, NORMAL CO.

1000811647





9COM/9CAT

68Chemicals

(Drilling Fluids)N-FLOW - BDF-443

ADDITIVE DRILLING FLUID; LIQUID FORM,SURFACTANT,FOR VALUE EMULSIFIER,

CHANGES THE WETTABILITY OF OIL MUD FILTER CAKE, FOR ACID

CLEANING,BLEND OF PROPRIERATORY CHEMICALS,55 GALLON DRUM,ADDITIVE,

DRILLING FLUID: LIQUID, SURFACTANT, EMULSIFIER, CHANGES THE WETTABILITY

OF OIL MUD FILTER CAKE, FOR ACID CLEANING, BLEND OF PROPRIERATORY

CHEMICALS, 55 GALLON DRUM , APPEARANCE: MILKY TO PALE YELLOW LIQUID,

ODOR: MILD SWEET, SPECIFIC GRAVITY 1.04 GM CC, BOILING POINT: 240 DEG C,

PH 5 - 7.5 (2.5 %), FLASH POINT: GREATER THAN 100 DEG C, SOLUBLE IN WATER

++ IS WATER WET SURFACTANT DISSOLVED IN THE CARRIER BRINE ALONG WITH

N-FLOW. IT CHANGES THE WETTABILITY OF OIL MUD FILTER CA.

1000812034

69Chemicals

(Drilling Fluids)LIQUID THINNER - 450 F

ADMIXTURE: DRILLING MUD; 25 KG DRUM. . . ADMIXTURE DRILLING MUD;

LIQUID FORM,MODIFIED ANIONIC SULPHONATED POLYACRYLATE,FOR

POLYMERIC DEFOCCULANT AND THINNER FOR USE IN LOW LOW SOLID NON

DISPERSED WATER BASE MUD TO IMPACT HIGH TEPERATURE STABILITY,5 GAL

PER CAN,UP TO 234 DEG C (450 DEG F), FOR DEEP WELL APPLICATIONS.

EFFECTIVE IN THE PRESENCE OF DIVALENT IONS AND SALTS.

1000021600

70Chemicals

(Drilling Fluids )

NONTREATED SODIUM

BENTONITE 1000KG Bag

ADMIXTURE, DRILLING MUD GROUND NONTREATED BENTONITE ADMIXTURE

DRILLING MUD; DRY, FREE FLOWING POWDER FORM,BENTONITE SODIUM

MONTMORILLONITE,FOR VISCOSIFIER AND FILTRATE REDUCER FOR WATER-

BASED FLUIDS,NATURAL SMECTITE (SODIUM MONTMORILLONITE) THAT

CONTAINS NO POLYMERS OR ANY OTHER CHEMICALS,RE-USABLE SUPER SACK,API

13A AND API 13 I (LATEST EDITION),THE ORIGINAL MANUFACTURER, PRODUCT

NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION

DATE, STOCK NUMBER SHOULD BE PROVIDED BY THE MANUFACTURER. RE-

USABLE SUPER SACK CONTAINER SHOULD BE SEALED, MULTI-LINED AND MADE

OF WATERPROOF MATERIAL. OTHER ASSOCIATED ELEMENTS IN THE

COMPOSITION MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY

AFFECT FLUID PROPERTIES. PROPER TUBE SAMPLING AND QUARTERING TO BE

CARRIED OUT BY TRAINED AND EXPERIENCED PERSONNEL.

1000021552





9COM/9CAT

71Chemicals

(Drilling Fluids)

HYDROXY ETHYL CELLULOSE

(HEC)

ADMIXTURE: DRILLING MUD; VISCOSIFIER; HYDROXY ETHYL CELLULOSE (HEC),

EXTREMELY HIGH-YIEDLING ADMIXTURE DRILLING MUD; DRY FREE FLOWING

WHITE POWDER FORM,HYDROXY ETHYL CELLULOSE (HEC),FOR MULTI-PURPOSE

VISCOSIFYING POLYMER RAPIDLY SOLUBLE IN FRESHWATER, SEA WATER SALT

SATURATED WATER AND COMPLEX BRINE SYSTEMS. IT IS STABLE AT 250 DEG

F.,HYDROXY ETHYL CELLULOSE (HEC),25 KG OR 50 LB BAG,WATER-SOLUBLE, NON-

IONIC, HIGH MOLECULAR WEIGHT POLYMER, SHIPMENT OF PRODUCT SHALL

CONFORM TO SAUDI NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER

BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY (INTERIOR PLY) 10# PE

COATING 0.000285 MICRON ALUMINUM SHEET 6# PE COATING 50 LB NATURAL

KRAFT PAPER. THE ALUMINUM SHEET IS COATED ON ONE SIDE WITH 10# PE THE

10# PE IS NEXT TO THE PRODUCT. THE COATED ALUMINUM SHEET IS LAMINATED

TO THE 50 LB KRAFT PAPER. 2ND PLY 50 LB NATURAL KRAFT PAPER. 3RD PLY 50

LB NATURAL KRAFT PAPER. 4TH PLY 50 LB BLEACHED WHITE NATURAL KRAFT

PAPER (EXTERIOR PLY). THE BLEACHED PAPER IS "FULLY BLEACHED WHITE". THE

BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED AND MOISTURE AND

WATER PROOF.

1000021672

72Chemicals

(Drilling Fluids )SODIUM CHLORIDE (NACI 99%)

ADMIXTURE: DRILLING MUD; SODIUMCHLORIDEADMIXTURE DRILLING MUD;

DRY, FREE FLOWING COLORLESS/ WHITEGRANULES OR CRYSTALS, MAIN

COMPONENT FORM,SODIUM CHLORIDE(NACI),FOR A WATER SOLUBLE

WEIGHTING AGENT FOR FORMULATINGSOLIDS FREE COMPLETION BRINES. TO

FORMULATE CLEAR SOLUTIONWITHOUT SUSPENDED MATTERS. ALSO, SALT

SATURATED DRILLING FLUIDSARE USED FOR DRILLING EVAPORITE SALT

SECTIONS.,SODIUMCHLORIDE,1000 KG OR 2200 LB BAG,FREE FLOWING, 0.04 MM-

0.4 MMGRAIN, SIZE NON-BREATHABLE FABRIC BAG W/ DISPOSABLE

LIFTINGSTRAP, STACKABLE W/O PALLET & WITHOUT BOTTOM SPOUT, MIN

TENSILESTRENGTH FACTOR 5 NORMAL HANDLING, SLNN-99SS MOISTURE-PROOF

BIGBAGS W/LIFTING STRAPS, CONTAINER PROPERLY LABELED, W/

VENDOR'SNAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE

ANDBATCH NO, NO PARTICLES GREATER THAN 5MM IN ANY DIMENSION.THE

DISPOSABLESUPER SACKS SHOULD HAVE AT# LEAST 75% OF THEIR SHELF

LIFEREMAINING (THE # PERIOD FROM THE DATE OF MANUFACTURE TO#

THEWARRANTED EXPIRATION DATE) WHEN # SHIPPED OR RECEIVED

ATDESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO.# REFER TO

SAPNUMBER: 1000840600 FOR # DISPOSABLE SUPER SACKS SPECIFICATION.

1000021741





9COM/9CAT

73Chemicals

(Drilling Fluids )

POTASSIUM CHLORIDE (KCL 97-

98 WT MIN)

ADMIXTURE: DRILLING MUD; 50 KG (100 LB) SACK; POTASSIUM CHLORIDE

(MURIATE OF POTASH) ADMIXTURE DRILLING MUD; DRY, WHITE FREE FLOWING

GRANULES FORM,POTASSIUM CHLORIDE,FOR PROVIDES POTASSIUM IONS IN

WATER- BASED DRILLING FLUIDS TO INHIBIT SHALE HYDRATION, SWELLING AND

DISPERSION. ALSO USED TO FORMULATE COMPLETION BRINE,POTASSIUM

CHLORIDE,50 KG OR 100 LB BAG,SHIPMENT OF PRODUCT SHALL CONFORM TO

SAUDI ARAMCO EXPORT PACKING MANUAL MULTI-MOISTURE-PROOF

POLYETHYLENE LINED BAGS. NO PARTICLES GREATER THAN 2MM IN ANY

DIMENSION NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG


(INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD PLY SEPARATE

INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER

LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A

MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 50 LB MIN. NATURAL KRAFT

PAPER. 5TH PLY 60 LB MIN. NATURAL KRAFT PAPER WET STRENGTH (EXTERIOR

PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE

AND WATER PROOF.

1000021744

74Chemicals

(Drilling Fluids)XANTHAN GUM (POWDER)

ADMIXTURE COMPONENTS: XANTHAN GUM BIO-POLYMER; 25 KG (50 LB) BAG.

ADMIXTURE DRILLING MUD; DRY FREE FLOWING POWDER FORM,PURE XANTHAN

GUM BIO-POLYMER,FOR PRIMARILY USED FOR VISCOSITY/ SUSPENSION IN FRESH

WATER, SEA WATER, & SATURATED BRINE-BASED DRILLING, WORKOVER &

COMPLETION FLUIDS,PURE XANTHAN GUM BIO-POLYMER,25 KG OR 50 LB

BAG,SHIPMENT AND PACKING: 25 KG (50 LB) SEALED MULTI-WALL PAPER BAG

(WITH INNER POLYETHYLENE BAG TO PREVENT MOISTURE CONTACT), SHIPMENT

OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.

1000021930





9COM/9CAT

75Chemicals

(Drilling Fluids)ORGANOPHILIC CLAY - 400F

INVERTED EMULSION MUD COMPONENTS: 25 KG (50 LB) BAG; POWDER; DRY

WHITE, ADMIXTURE DRILLING MUD; WHITE, DRY, FREE FLOWING POWDER, FREE

OF LUMPS FORM,OIL-BASED DRILLING FLUID GELLING AGENT,FOR HELPS

VISCOSIFY ANY OIL- BASED DRILLING FLUIDS HELPS IMPROVED HOLE CLEA- NING

DURING DRILLING AND WORKOVER OPERATIONS DRILL OIL MUDS FOR LONG

TERM SUSPENSION OF WEIGHTING AGENTS IN PACKER FLUIDS & CASING

PACKS.,AMINE TREATED BETONITE, A BENTONITE CLAY THAT HAS BEEN TREATED

WITH AN AMINE COMPOUND TO PROMOTE ITS DISPERSION/YIELD IN OILS.,22.7

KG (50 LB) MULTI-WALL SACKS.,SPECIFIC GRAVITY: 1.57 TO 1.70 APPEARANCE:

OFF-WHITE TO TAN POWDER ODOR/TASTED: SLIGHT, AMINE SOLUBILITY:

INSOLUBLE IN WATER DISPERSIBLE IN ORGANIC SOLVENTS. DECOMPOSITION

TEMP: >200C DEG FLASH POINT: NON- FLAMMABLE REACTIVITY: CHEMICALLY

STAB,ORGANOPHILIC CLAY, USED TO IMPART VISCOSITY AND SUSPENSION

PROPERTIES TO OIL-BASED DRILLING FLUIDS ORGANOPHILIC CLAY VISCOSIFIER

TEMPERATURE APPROACHING APPROACHING 400 F DEG (20C DEG) IMPROVES

FILTER. CAKE QUALITY AND FILTARATION-CHARACTERISTICS PROVIDES GEL-

STRUCTURE AND VISCOSITY FOR THE- SUSPENSION OF WEIGHT MAERIALS

VICOSITY FOR IMPROVED- HOLE CLEANING CAPACITY EFFECTIVE GELLING AGENT

IN CASING PACKS AND PACKER FLUIDS.

1000022174

76Chemicals

(Drillning Fluids)LUBRICANT WBM

LUBRICANT: DRILLING MUD; DIAMINE AND FATTY ACID WITH ALCOHOL AMIDE IN

VEGETABLE OIL LUBRICANT; DRILLING MUD TYPE,LIQUID, SOLIDS FREE, AMBER

FORM,208.2 L (55 GAL) DRUM,NON-TOXIC LUBRICANT FOR REDUCING

ROTATIONAL TORQUE, DRAG AND BIT BALLING, CAUSE NO ADVERSE EFFECTS ON

MUD PROPERTIES AND CAN BE USED IN ALL DIFFERENT TYPES OF WATER-BASED

FLUIDS. THE PRODUCT MUST BE EFFECTIVE OVER A WIDE TEMPERATURE RANGE

IN THE PRESENCE OF CONTAMINANTS INCLUDING HIGH SOLIDS, HIGH CALCIUM

OR MAGNESIUM. SHOULD NOT CAUSE FOAM OR GREASE OUT. DRUMS MUST BE

MARKED WITH: VENDORS'S NAME & LOCATION, PRODUCTION DATE, BATCH NO.,

PURCHASE ORDER NO., AND STOCK NO.

1000022179





9COM/9CAT

77Chemicals

(Drilling Fluids )CEMENT CLASS "G", Bulk

ADDITIVE: CEMENT; BULK DELIVERY IN TN. CEMENT; OIL WELL TYPE,BULK

TONS,API SPEC 10 CL G TYPE HSR,HIGH SULPHATE-RESISTANT. PRODUCT

MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF

ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL

MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF

MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE

CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000022631

78Chemicals

(Drilling Fluids)

POTASSIUM FORMATE (75% SOL,

WATER 25%)

ADMIXTURE DRILLING MUD; LIQUID FORM,POTASSIUM FORMATE SOLUTION

(KCOOH & H20),FOR FORMULATING SOLIDS FREE WORKOVER FLUIDS FOR USE IN

THE KHUFF AND PRE-KHUFF FORMATION,POTASSIUM FORMATE 75% AND

WATER 25% SOLUTION, CLEAR LIQUID, DENSITY 1570 KG/M3 @ 20 DEG C, PH

10.0 @ 25 DEG C,1000 LITER (1570 KG) IBC OR TOTE CONTAINER (CO),IRON LESS

THAN 10 PPM, CHLORIDE CONTENT LESS THAN 40 PPM, TURBIDITY MAX 10 NTU,

SOLUBLE IN ALL PROPORTIONS IN WATER EXPORT PACKING MANUAL.

1000774250

79Chemicals

(Drilling Fluids)

POTASSIUM FORMATE CRYSTALS

(97% KCOOH)

ADMIXTURE DRILLING MUD; FREE FLOWING SOLID CRYSTALS FORM,POTASSIUM

FORMATE 97% WEIGHT (KCOOH),FOR FORMULATING SOLIDS FREE WORKOVER

FLUIDS FOR USE IN THE KHUFF AND PRE-KHUFF FORMATION,POTASSIUM

FORMATE 97% WEIGHT & CONDITIONING AGENT 3% WEIGHT, POWDER, WHITE

COLOR, BULK DENSITY 1080 KG/M3,25 KG MULTI-WALL SACK,SPECIFIC GRAVITY

(POWDER ONLY) 1.91, SOLUBILITY IN WATER 355 GR/100 ML @ 20 DEG C ,

MELTING POINT 169 DEG C TEMPERATURE STABILITY UP TO 400 F (204 C),


MANUAL.

1000774251

80Chemicals

(Drilling Fluids)

SODIUM FORMATE POWDER

(98% NACOOH)

ADMIXTURE DRILLING MUD; FREE FLOWING GRANULES FORM,SODIUM

FORMATE POWDER 98% (NACOOH),FOR FORMULATING SOLIDS FREE WORKOVER

FLUIDS FOR USE IN THE KHUFF AND PRE-KHUFF FORMATION,SODIUM FORMATE

98% WEIGHT & OTHER ORGANICS 2% WEIGHT, WHITE COLOR, BULK DENSITY 900-

950 KG/M3,25 KG MULTI-WALL SACK,SPECIFIC GRAVITY (POWDER ONLY) 1.92,

SOLUBILITY IN WATER 81GR/100 ML @ 20 DEG C , MELTING POINT 253 DEG C ,

TEMPERATURE STABILITY UP TO 400 F (204 C), SHIPMENT OF PRODUCT SHALL

CONFORM TO SAUDI ARAMCOEXPORT PACKING MANUAL.

1000774252





9COM/9CAT

81Chemicals

(Drilling Fluids)LIGNITE

ADDITIVE DRILLING FLUID; POWDER FORM,LIGNITE / CRYSTALLINE SILICA,

QUARTZ,FOR USED TO AID IN FILTRATION CONTROL AND CONTROL VISCOSITY

AND GEL STRENGTHS OF WATER-BASED DRILLING FLUIDS,SACK PACKING (25 KG

OR 50 LB),USED TO APPEARANCE: BLACK POWDER, COLOUR: BLACK,

ODOUR/TASTE: ODORLESS, SPECIFIC GRAVITY: 1.7, SOLUBILITY IN WATER:

INSOLUBLE, BULK DENSITY AT 20 DEG C: 40 LBS/FT3, USED TO EMULSIFY OIL INTO

WATER-BASED FLUIDS, SHIPMENTS OF PRODUCT SHALL CONFORM TO SAUDI

ARAMCO EXPORT PACKING MANUAL.

1000827162

82Chemicals

(Drillning Fluids)

CALCIUM BROMIDE (SOL 53% WT

MINIMUM)

ADMIXTURE: DRILLING MUD; 208 LITER (55 GAL) DRUM. CALCIUM BROMIDE

ADMIXTURE DRILLING MUD; SINGLE SALT (CABR2), SOLIDS-FREE BRINE

FORM,CALCIUM BROMIDE (CABR2),FOR A SOLIDS-FREE BRINE USED IN

COMPLETION FLUIDS AND CAN BE BLENDED WITH ZINC/CALCIUM BROMIDE AND

CALCIUM CHLORIDE SOLUTIONS TO FORMULATE NON- DAMAGING FLUIDS OF

DENSITIES 87.5 PCF (11.7 LB/GAL) TO 113 PCF (15.1 LB/GAL),CALCIUM BROMIDE

(53% SOLUTION),208 L OR 55 GAL OR 340 KG DRUM,POLYPROPYLENE-LINED

STEEL DRUMS.

1000021557

83Chemicals

(Drilling Fluids)

POLYANIONIC CELLULOSE

REGULAR (PAC-R)

ADMIXTURE: DRILLING MUD POLYANIONIC CELLULOSE DERIVATIVE (REGULAR)

PAC-R ADMIXTURE DRILLING MUD; DRY, FREE FLOWING POWDER

FORM,POLYANIONIC CELLULOSE,FOR USED AS A FILTRATE REDUCER AND

SUPPLEMENTARY VISCOSIFIER TO FORM A THIN, RESILIENT FILTER CAKE. IT IS

EFFECTIVE IN FRESH WATER, SEA WATER AND SALT SATURATED FLUIDS,PURE,

SALT-FREE POLYANIONIC CELLULOSE POLYMER,MULTI-WALLED BAGS, 25 KG OR

50 LB BAG,API 13 I SUPPLEMENT-2, SECTION 22 (MAY, 2000 OR LATEST

EDITION),OTHER ASSOCIATED ELEMENTS IN THE COMPOSITION MUST NOT BE

HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES.

PROPER TUBE SAMPLING AND QUARTERING TO BE CARRIED OUT BY TRAINED

AND EXPERIENCED PERSONNEL. POLYANIONIC CELLULOSE, PAC-R SHALL NOT

CONTAIN ANY OTHER POLYSACCHARIDES SUCH AS STARCH, GUAR, OR OTHER

POLYMERS OR THEIR DERIVATIVES NOTE: THE CONSTRUCTION OF THE MULTI-

WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50 LB MIN.

NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT

PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND

CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE

RESIN MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1 MM. 4TH PLY 50 LB

MIN.

1000021605





9COM/9CAT

84Chemicals

(Drilling Fluids)CHROME FREE LIGNOSULFONATE


CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; POWDER

FORM,MODIFIED CHROME FREE LIGNOSULFONATE,FOR DISPERSANT FOR

REDUCING VISCOSITY & GELS IN SALTY, GYPPY & FRESH WATER MUDS,25 KG OR

50 LB BAG,API 13A,FREE FLOWING, SHIPMENT OF PRODUCT SHALL CONFORM TO

SAUDI ARAMCO EXPORT PACKING MANUAL NOTE: THE CONSTRUCTION OF THE

MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50 LB

MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL

KRAFT PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED

AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF

POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNES OF 0.1 MM.

4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB MIN. NATURAL KRAFT

PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT TYPE,

COMPLETELY SEALED, MOISTURE AND WATER PROOF.

1000021670

85Chemicals

(Drilling Fluids )

MARBLE FINE, PURE CaCO3 -

2200 LB BAGS

ADMIXTURE: DRILLING MUD; GROUND MARBLE: FINE GRADE; 9-11 MICRON

PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD; DRY, FREE

FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)

METAMORPHOSED,FOR USED AS WEIGHTING, BRIDGING AND FILTRATE CONTROL

AGENT IN BRINE-BASED OIL-BASED AND SALT SATURATED FLUIDS,GROUND

MARBLE FINE, 9-11 MICRON PURE METAMORPHOSED CALCIUM CARBONATE

CACO3 & CAMG (CO3)2,BREATHLESS 1000 KG OR 2200 LB BAG,PROPERLY

LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION,

PRODUCTION DATE,BATCH NO. AND STOCK NO. SIZED METAMORPHIC CALCIUM

CARBONATE GROUND LIMESTONE OR BLENDS W/LIMESTONE ARE NOT

ACCEPTABLE 9-11 MICRON PARTICLE, 95% SOLUBLE IN 15% HCL ACID, TYPE

"MEDIAN D-50", LIFTING STRAP BAG IS DISPOSABLE, WATERPROOF, UV

STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT, MINIMUM TENSILE

STRENGTH FACTOR 5 FLEXURAL STRENGTH SUFFICIENT TO SUSTAIN NORMAL

HANDLING & OUTDOOR STORAGE FOR THE PRODUCT'S SHELF LIFE IN SAUDI

ARABIAN CLIMATIC CONDITIONS.PRODUCT MANUFACTURER AND OR SUPPLIER

REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF

ORIGIN (COO).THE DISPOSABLE SUPER SACKS SHOULD HAVE AT# LEAST 75% OF

THEIR SHELF LIFE REMAINING (THE # PERIOD FROM THE DATE OF MANUFACTURE

TO# THE WARRANTED EXPIRATION DATE) WHEN # SHIPPED OR RECEIVED AT

DESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO.

1000021813





9COM/9CAT

86Chemicals

(Drilling Fluids)DETERGENT

AGENT: WELL STIMULANT; 20 LITER (5GAL.) CAN. . AGENT WELL STIMULANT; FOR

SURFACTANT & DETERGENT FOR DRILLING WATER & LOW SOLID MUD,LIQUID

FORM,20 L OR 5 GAL CAN.

1000021975

87Chemicals

(Drilling Fluids )NON-IONIC POTATO STARCH

ADMIXTURE: DRILLING MUD; 25 KG BAG; POTATO STARCH STABLE AGAINST

BACTERIA ADMIXTURE DRILLING MUD; DRY, FREE FLOWING COARSE

GRANULATED POWDER FORM,POTATO STARCH,FOR PROVIDES FILTRATE

CONTROL W/MINIMUM VISCOSITY BUILDUP. THE PRODUCT IS A NON-IONIC

POLYMER USED IN WATER- BASED FLUIDS WITH HIGH CONCENTRATIONS OF

MONOVALENT AND DIVALENT CATIONS OR COMBINATIONS OF ELECTROLYTES

AND IN CLAY-FREE, NON-DISPERSIVE SYSTEMS,POTATO STARCH,25 KG OR 50 LB

BAG,NO PARTICLES (RESIDUE) GREATER THAN 2000 MICROMETERS SHIPMENT OF

PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.

MULTI-WALLED BAGS, SEALED WITH INNER POLYETHYLENE COATING, MAIN

COMPONENT PREGELATINZED, NON- FERMENTING POTATO CONSTRUCTION OF

THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50

LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL

KRAFT PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED

AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF

POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1

MM. 4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB MIN. NATURAL

KRAFT PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT

TYPE, COMPLETELY SEALED, MOISTURE AND WATER PROOF.

1000022170

88Chemicals

(Drilling Fluids)

CALCIUM CHLORIDE (77-78%)

2200 lb/BAG

ADMIXTURE, CEMENT: ADDITIVE, CEMENT, 1000 KG PER BAG, CALCIUM

CHLORIDE ADMIXTURE CEMENT; FOR WATER SOLUBLE WEIGHTING AGENT FOR

FORMULATING SOLIDS-FREE COMPLETION BRINES AND TO PROVIDE THE DESIRED

WATER PHASE ACTIVITY IN INVERT EMULSION MUDS. ALSO USED AS AN

ACCELERATOR IN OIL WELL CEMENT SLURRIES,TYPE 1,77-78% CALCIUM

CHLORIDE (CACL2), FLAKES OR PELLETS,1000 KG OR 2200 LBS BAG,ASTM D98-

68,LIFTING STRAP, BAG IS DISPOSABLE, TOP CLOSURE WATERTIGHT, STACKABLE

& WITHOUT BOTTOM SPOUT, MINIMUM TENSILE STRENGTH FACTOR 5,

FLEXURAL STRENGTH FOR NORMAL HANDLING & OUTSIDE STORAGE NO

PARTICLES GREATER THAN 2MM IN ANY DIMENSION, MULTI-WALL MOISTURE-

PROOF POLYETHYLENE LINED BAGS W/LIFTING STRAPS, WITHOUT BOTTOM

SPOUT. DRY, FREE FLOWING FLAKES, GRANULES OR PELLETS.

1000022533





9COM/9CAT

89Chemicals

(Drilling Fluids)NVIS HI - 50 LB

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SILICATE,FOR VISCOSIFIER

USED IN MILLING CASING WINDOWS,CALCIUM ALUMINOSILICATE,50 LB SEALED

MULTI-WALL PAPER BAG,GRAY COLOR, SPECIFIC GRAVITY [email protected] 20 DEG C, PH 11,

INSOLUBLE IN WATER, ODERLESS, SHIPMENT OF PRODUCT SHALL CONFORM TO

SAUDI ARAMCO EXPORT PACKING MANUAL THE ORIGINAL MANUFACTURER ,

PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL,

EXPIRATION DATE IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN BE

PRINTED ON THE CONTAINER, THE CONSTRUCTION OF THE MULTI-WALLED

PAPER BAG FOLLOWS: (CONTAINER) SHALL BE AS 1ST PLY 50 LB MIN. NATURAL

KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD

PLY SEPARATE INNER BAG LINER , HIGH DENSITY ORIENTED AND CROSS-

LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN

MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1 MM. 4TH PLY 50 LB MIN.

1000757569

90Chemicals

(Drilling Fluids)H2S SCAVENGER, POWDER

ADMIXTURE DRILLING MUD; POWDER, GRANULAR FORM,ORGANOMETAL,FOR

SCAVENGES HYDROGEN SULFIDE FROM DRILLING FLUIDS,IRON GLUCONATE,25

KG SEALED MULTI-WALL PAPER BAG,SOLID, LIGHT YELLOW GREEN COLOR, BULK

DENSITY 650 - 850 KG/M3 @ 20 DEG C, PH 4.5 (1% AQUEOUS SOLUTION),

SOLUBLE IN WATER, MILD BURNT SUGAR ODOR, SHIPMENT OF PRODUCT SHALL

CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL THE ORIGINAL

MANUFACTURER , PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF

MATERIAL, EXPIRATION DATE IF REQUIRED, STOCK NUMBER AND COUNTRY OF

ORIGIN BE PRINTED ON THE CONTAINER, THE CONSTRUCTION OF THE MULTI-

WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS 1ST PLY 75 LB MIN.

NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT

PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND

CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE

RESIN MATERIAL WITH A MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 80 LB

MIN. NATURAL KRAFT PAPER (EXTERIOR PLY).

1000757581





9COM/9CAT

91Chemicals

(Drilling Fluids)ACID SOLUBLE FIBER

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SPUN MINERAL FIBER,FOR

CONTROLS SEEPAGE, BRIDIGING, PLUGGING VOIDS, FRACTURES DURING

WORKOVER OPERATIONS,CRYSTALLINE SILICA, QUARTZ AND BLAST FURNACE

SLAG,30 LB SEALED MULTI-WALL PAPER BAG,WHITE TO GRAY COLOR, SPECIFIC

GRAVITY [email protected] 20 DEG C, PH 7-8, BULK DENSITY 12-26 LBS/GALLON @ 20 DEG C

INSOLUBLE IN WATER, ODERLESS, SHIPMENT OF PRODUCT SHALL CONFORM TO

SAUDI ARAMCO EXPORT PACKING MANUAL THE ORIGINAL MANUFACTURER ,

PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL,

EXPIRATION DATE IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN BE

PRINTED ON THE CONTAINER, THE CONSTRUCTION OF THE MULTI-WALLED

PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 30 LB MIN. NATURAL

KRAFT PAPER (INTERIOR PLY) 2ND PLY 30 LB MIN. NATURAL KRAFT PAPER 3RD

PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-

LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN

MATERIAL WITH A MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 30 LB MIN.

NATURAL KRAFT PAPER. 5TH PLY 30 LB MIN. NATURAL KRAFT PAPER WET

STRENGTH (EXTERIOR PLY).

1000757582

92Chemicals

(Drillning Fluids)

ALCOHOL AND FATT ACID

DEFOAMER

ADMIXTURE: DRILLING MUD; ORGANOSILICONE, HIGH MOLECULAR

WEIGHTALCOHOL & MODFD FATTY ACID DERIVATIVESADMIXTURE DRILLING

MUD; LIQUID FORM,CRUDE OIL AQUEOUS SOLUTION &WATER-BASE DRILLING

FLUID,FOR DEFOAMER,CRUDE OIL AQUEOUSSOLUTION & WATER-BASE DRILLING

FLUID,55 GAL DRUM,TO REMOVESURFACE AERATION & FOAM IN FRESHWATER,

SEAWATER & BRINE-BASEDDRILLING, COMPLETION & WORKOVER FLUIDS,

REDUCE FOAMINGTENDENCIES OF FLUIDS PREPEARED BY VIGOROUS MIXING OR

AGITATIONAND VISCOSIFIED WITH POLYMERS SUCH AS XANTHAN GUM, HEC,

STARCH,CMC AND PAC, MUST BE MISCIBLE IN WATER, EFFECTIVE

INREMOVINGDISSOLVED OXYGEN AND FOAM WITH SMALL

CONCENTRATIONS,SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO

EXPORT PACKINGMANUAL, MUST BE MARKED WITH: MANUFACTURER'S NAME &

LOCATION,PRODUCTION DATE, BATCH NO.,PURCHASE ORDER NO. AND SAUDI

ARAMCOSTOCK NO.

1000021604





9COM/9CAT

93Chemicals

(Drilling Fluids)SULPHONATE ASPHALT


CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; BLACK, DRY,

FREE FLOWING POWDER OR FLAKES, FREE OF LUMPS FORM,MODIFIED

HYDROCARBON COMPOUND SODIUM ASPHALT SULPHONATE. OTHER

ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR

ADVERSELY AFFECT FLUID PROPERTIES.,FOR STABILIZES SHALE FORMATIONS

REDUCES TORQUE AND DRAG, INHIBITS THE DISPERSION OF DRILL SOLIDS,

REDUCES FILTRATE, EMULSIFIER COMPATIBLE TO ALL MUD SYSTEMS, AS IT IS

SOLUBLE IN BOTH OIL & WATER. HAS GOOD EMULSIFYING CHARACTERISTICS.

REDUCES THE FREQUENCY OF STUCK PIPE HAS NO ADVERSE EFFECTS ON MUD

PROPERTIES.,A BLEND OF HYDROXYLATED SODIUM ASPHALT SULPHONATE WITH

MINOR AMOUNTS OF ASPHALT PHENALATES, INORGANIC SALTS & OXIDIZED

ASPHALT. EXHIBITS SOME FLUORESCENCE. HOWEVER, THIS PROBLEM IS USUALLY

ELIMINATED THROUGH THE WASHING OF CUTTINGS.

1000021607

94Chemicals

(Drilling Fluids)

HYDRATED CALCIUM SULFATE -

GYPSUM

ADMIXTURE: DRILLING MUD; 25 KG/SACK; CALCIUM SULFATE (GYPSUM)

ADMIXTURE DRILLING MUD; DRY, FREE FLOWING FINE WHITISH POWDER

FORM,HYDRATED CALCIUM SULFATE,FOR A SOURCE OF CALCIUM IONS TO TREAT

CARBONATE CONTAMINATION IN HIGH PH MUDS, AND TO AVOID HOLE

ENLARGEMENT WHEN ANHYDRITE IS DRILLED,25 KG OR 55 LBS/SACK,SHIPMENT

OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUA

Aramco Asia Korea Limited - Saudi Aramco · product shall conform to saudi aramco export packing manual ... 2015 saudi aramco: company general use 1. ... formats, completion, workover

Text of Aramco Asia Korea Limited - Saudi Aramco · product shall conform to saudi aramco export packing...

upstream - Saudi Aramco

Saudi Aramco Contractor Workforce Qualification Assurance ...zamiltraining.com/images/banners/Aramco-CWQAP-Leaflet2018.pdf · Saudi Aramco Contractor Workforce Qualification Assurance

Drilling and Workover Aramco Training 2013_2.pdf

Driven Saudi Aramco’s Aramco’s newest test vehicle to ...A Periodical of Saudi Aramco Periodical Periodical of Saudi Aramco of Saudi Aramco WinterFALL 2018 2014 2014 ... which

downstream - Saudi Aramco

Journal of - Saudi Aramco

Saudi Aramco Presentation

Saudi Aramco DeskTop Standards

Saudi Aramco Calendar

Saudi Arabian Oil Company (Saudi Aramco)

Saudi Aramco Approval

Aramco Services Company (ASC) - Saudi Aramco · product shall conform to saudi aramco export packing manual ... workover fluids. used with brines, also, recommended for drill-in fluids

RESERVOIR MANAGEMENT EMPHASIZES PEOPLE …€¦ · engineering and drilling and workover ... Guidelines and Standards Manual). ... The mission of reservoir management at Saudi Aramco

Saudi Aramco Scaffold Handbook

RESERVOIR MANAGEMENT EMPHASIZES PEOPLE ... - … · engineering and drilling and workover engineering. ... Guidelines and Standards Manual). ... Saudi Aramco is to be an industry

Saudi Aramco - WorkOver Manual[1]

Saudi Aramco facts & figures 2015€¦ · 2 Saudi Aramco Facts & Figures 2015 3 Disclaimer: Each company affiliated with the Saudi Arabian Oil Company (“Saudi Aramco”), and in

Saudi Aramco Approval Letters

POST EVENT REPORT - Society of Petroleum Engineers · POST EVENT REPORT ... Saudi Aramco • James Blaine, Middle East JV Drilling Manager, ExxonMobil ... Drilling and Workover, Saudi

Horizons - Saudi Aramco

Saudi Aramco Wastewater Reuse Efforts.ppt - SAWEA Aramco... · Saudi Aramco Wastewater Reuse Efforts ... Saudi Aramco Strict Reuse StandardsSaudi Aramco Strict Reuse Standards Parameter

india.aramco.com · 2019-05-23 · Spring 2019 THE SAUDI ARAMCO JOURNAL OF TECHNOLOGY A quarterly publication of the Saudi Arabian Oil Company Saudi Aramco Saudi Aramco Journal of

Metal Eco System Workshop - Saudi Aramco · 2020. 3. 11. · Saudi Aramco: Public Pressure Relief Valves Standards and Specifications Saudi Aramco Standard: SAES-J-600 Saudi Aramco

Saudi Aramco Meal

SAUDI ARAMCO SCAFFOLD HANDBOOK.pdf

TMEIC Hosted Electrical Engineer Internship from Saudi Aramco Saudi Aramco... · TMEIC Hosted Electrical Engineer Internship from Saudi Aramco . TMEIC currently hosted an internship

Saudi Aramco Heatmap

Journal of - Saudi Aramco · THE SAUDI ARAMCO JOURNAL OF TECHNOLOGY A quarterly publication of the Saudi Arabian Oil Company Saudi Aramco ... relief valve, connecting pipes, pressure

Saudi Aramco HAZOP Guidelines.pdf

SAUDI ARAMCO PRODUCTS TRADING COMPANY · PDF fileSAUDI ARAMCO PRODUCTS TRADING COMPANY ... PETCOKE SPECIFICATION ... 2.5 “Aramco Trading” means Saudi Aramco Products Trading Company

Documents

Aramco Asia Korea Limited - Saudi Aramco · product shall conform to saudi aramco export packing manual ... 2015 saudi aramco: company general use 1. ... formats, completion, workover

Text of Aramco Asia Korea Limited - Saudi Aramco · product shall conform to saudi aramco export packing...