Embed Size (px)
Citation preview
Application for permission to immobilise
Marine and Navigation Services Page 1 of 1
P: +61 3 9644 9700
VTS-04 Application for permission to immobilise (Version 6 - May 2019)
Printed copies are uncontrolled – refer to www.vicports.vic.gov.au for the latest version
To Melbourne Vessel Traffic Services (VTS) Email
From Name Email
Permission is requested to immobilise (the vessel)
while at (berth/anchorage)
from (time 24-hr) to (time 24-hr)
from (date dd/mm/yyyy) to (date dd/mm/yyyy)
Nature of immobilisation: Main engine/other (specify)
Estimate of time to mobilise in an emergency (hours)
Will slow steaming be required on departure? Yes No If yes, fax Port Phillip Sea Pilots on +61 3 5258 1952
1. the time immobilisation will start and the expected duration
2.
3.
any changes to the expected time of completion
The Master of the vessel should:
Name Date (dd/mm/yyyy)
If vessel is a tanker, email completed form to VPCM Health and Safety. E: [email protected]
Forwarded
1.
2.
3.
understand that Melbourne VTS may place additional requirements on the vessel
obtain permission from the terminal operator (if applicable)
notify Melbourne VTS before testing engines following immobilisation (where applicable)
4. be aware of expected weather conditions for the period and continue to monitor weather forecasts(specifically for vessels carrying out immobilisation while at anchor).
Application for permission to immobilise
the actual time immobilisation is complete.
The Master of a vessel will ensure Melbourne VTS is advised on +61 3 9644 9700 of the following:
Victorian Ports Corporation (Melbourne)
Pursuant to Harbour Master's Directions (11th Edition), it is mandatory for vessels within port waters to makeapplication to Melbourne VTS if it is intended to be immobilised.
