Antenna system components Product catalogue 2020AN3838-OI-M1-4 380-3800 MHz MiMo Omni ceiling antenna 4.3-10 female 10 AN7040-OI-01-4 698-4000 MHz Slim Omni ceiling antenna 4.3-10

Antenna system componentsProduct catalogue 2020

IntroductionDual B provides high quality antenna system components. High performance,reliability and comptetitive prices are the main characteristics of the products.

Dual B antennas are widely used in Scandinavia in several shopping malls,hospitals, metro stations, schools, residential and office buildings, etc.

Product portfolio is getting wider all the time. Some of the new products areintroduced on the next page.

Technical requirements for antenna system components are getting tougher in thesame time as mobile networks are getting more complex. General requirementnowadays in Scandinavia are 4.3-10 connector, support from Tetra to 5G, andPIM level -150 dBc for antennas and power splitters.

We took one step further and went to with our newpower splitters.

2/40

Highlights of the new products

380-3800 MHz MiMo Omni ceiling antenna. Page 10

Operates as MiMo in 698-3800 MHz and SiSO in 380-490 MHz.PIM level of -150 dBc.

698-4000 MHz Slim Omni ceiling antenna. Page 11

Almost unnoticeable ceiling antenna due to very slim design.Antenna’s thickness is 7,3 mm. PIM level of -153 dBc.

68-490 / 698-2690 MHz Dual-band combiner. Page 27To connect e.g. Tetra and 4G to the same network. PIM level of -160 dBc.

698-2700 / 3400-3800 MHz Dual-band combiner. Page 28To connect 5G to the same mobile network with 2G, 3G and 4G. PIM level of -160 dBc.

340-3800 MHz Wideband Low PIM power splitters. Page 33

Clever design saves money and space on cable ladder.

New inline design, no connectors on opposite sides as in traditional power splitters.Requires less space from sides and no need for additional thin jumper cable.PIM level of -160 dBc.

350-5925 MHz power tappers. Page 34

Super wideband power tapper is very small (94 mm long) and has PIM level of-161 dBc.

All new products are highlighted with blue color in Table of content

3/40

30 cm blue pigtail cable is a factory standard in DAS antennas. Dual B’s approach is different.

Dual B indoor antennas are provided with 100 cm white cable. It brings a few advantages:

1. Cost savings - No need for an additional jumper cable for splitter/tapper connections. Savemoney by using fewer jumper cables and less installation time.

2. Minimize error source - Risk of PIM and other malfunctions will be minimized by usingfewer connections.

3. Discreet installation - No need to hide the cable by white cableduct or shrink sleeve.

Length and color of pigtail cable does matter

4/40

Product number Description Connector PageAN3560-OI-01-4 350-6000 MHz Low profile Omni ceiling antenna 4.3-10 female 8AN3838-OI-01-4 380-3800 MHz Omni Indoor ceiling antenna 4.3-10 female 9AN3838-OI-01-N 380-3800 MHz Omni Indoor ceiling Antenna N N female 9AN3838-OO-01-4 380-3800 MHz Omni Indoor ceiling Antenna Water Protected 4.3-10 female 9AN3838-OI-M1-4 380-3800 MHz MiMo Omni ceiling antenna 4.3-10 female 10AN7040-OI-01-4 698-4000 MHz Slim Omni ceiling antenna 4.3-10 female 11AN7038-OI-01-4 698-3800 MHz Omni Indoor ceiling antenna 4.3-10 female 12AN7040-OI-M1-4 698-4000 MHz Omni MiMo ceiling antenna 4.3-10 female 13AN7040-OI-M2-4 698-4000 MHz Slim Omni MiMo ceiling antenna 4.3-10 female 14KQ-07274H2DAS-43 698-2700 MHz MIMO Omni indoor ceiling mount antenna 4.3-10 female 15AN3838-DI-01-4 380-3800 MHz Directional Indoor Wall Mount 4.3-10 female 16AN3838-DO-01-4 380-3800 MHz Directional Indoor Wall Mount Water Protected 4.3-10 female 16AN7038-DI-01-4 698-3800 MHz Directional Indoor Wall Mount 4.3-10 female 17AN7040-DI-M1-4 698-4000 MHz Directional MiMo wall antenna 4.3-10 female 18AN7038-DI-M1-4 698-3800 MHz Directional MiMo wall antenna 4 ports 4.3-10 female 19

DAS antennas

Product number Description Connector PageAN7038-OO-01-4 698-3800 MHz Omni Outdoor Antenna 4.3-10 female 20AN7027-OO-01-4 698-2700 MHz Omni Outdoor Antenna 4.3-10 female 21AN7027-DO-01-4 698-2700 MHz Xpol 13.5/15 dBi 20° Directional Antenna 4.3-10 female 22KD-072712X65-43 698-2700 MHz Xpol 12dBi 65° Directional Antenna 4.3-10 female 23AN0727-DO-01-N 700-2700 MHz 10 dBi Yagi antenna N female 24AN0727-DO-03-S 700-2700 MHz 10 dBi Yagi antenna 3 m cable SMA male 24AN0727-DO-06-S 700-2700 MHz 10 dBi Yagi antenna 6 m cable SMA male 24AN0727-DO-10-S 700-2700 MHz 10 dBi Yagi antenna 10 m cable SMA male 24PAN390PV9G90 380-400 MHz 11 dBi Directional panel antenna N female 25BY70-10GT 380-430 MHz 12 dBi Yagi antenna N female 26

Donor antennas

Table of content

Product number Description Connector PageDC1027-12-01-4 68-490 / 698-2690 MHz Dual-band combiner 4.3-10 female 27DC7038-12-01-4 698-2700 / 3400-3800 MHz Dual-band combiner 4.3-10 female 28DC0740-24-01-4 68-2700 / 3300-4000 MHz Dual-band combiner Double unit 4.3-10 female 29

Dual band combiners

5/40

Product number Description Connector PageSP3438-02-01-4 340-3800 MHz 2-way power splitter 4.3-10 female 33SP3438-03-01-4 340-3800 MHz 3-way power splitter 4.3-10 female 33SP3438-04-01-4 340-3800 MHz 4-way power splitter 4.3-10 female 33TA3559-05-01-4 350-5925 MHz Tapper -1.8/-4.8dB 4.3-10 female 34TA3559-06-01-4 350-5925 MHz Tapper -1.3/-6.1dB 4.3-10 female 34TA3559-07-01-4 350-5925 MHz Tapper -1/-7dB 4.3-10 female 34TA3559-08-01-4 350-5925 MHz Tapper -0.7/-8.6dB 4.3-10 female 34TA3559-10-01-4 350-5925 MHz Tapper -0.4/-10.4dB 4.3-10 female 34TA3559-13-01-4 350-5925 MHz Tapper -0.2/-13.2dB 4.3-10 female 34TA3559-15-01-4 350-5925 MHz Tapper -0.1/-15.1dB 4.3-10 female 34TA3559-20-01-4 350-5925 MHz Tapper -0.1/-20.1dB 4.3-10 female 34TA3559-30-01-4 350-5925 MHz Tapper -0.1/-30.1 dB 4.3-10 female 34KTP-05-43 350-2700 MHz Tapper -1.8 / -4.8 4.3-10 female 35KTP-06-43 350-2700 MHz Tapper -1.3 / -6.1 4.3-10 female 35KTP-07-43 350-2700 MHz Tapper - 0.97 / -7 4.3-10 female 35KTP-10-43 350-2700 MHz Tapper -0.4 / -10.4 4.3-10 female 35KTP-15-43 350-2700 MHz Tapper -0,1 / -15,1 4.3-10 female 35KTP-20-43 350-2700 MHz Tapper -0.1 / -20.1 4.3-10 female 35KTP-30-43 350-2700 MHz Tapper -0.1 / -30.1 4.3-10 female 35

Power splitters and tappers

TerminatorsProduct number Description Connector PageTE0038-10-01-4 0-3800 MHz Terminator 10W 4.3-10 female 36TE0038-25-01-4 0-3800 MHz Terminator 25W 4.3-10 female 36TE0038-50-01-4 0-3800 MHz Terminator 50W 4.3-10 female 36TE0038-100-01-4 0-3800 MHz Terminator 100W 4.3-10 female 36

Product number Description Connector PageHC3427-44-01-4 340-2700 MHz Hybrid combiner 4x4 4.3-10 female 30HC7038-44-01-4 698-3800 MHz Hybrid combiner 4x4 4.3-10 female 31HC7027-33-01-4 698-2700 MHz Hybrid combiner 3x3 4.3-10 female 32

Hybrid combiners

6/40

Tools and mountingsProduct number Description PageMOS-01 Mounting kit for omni antenna 37380002 90° angle wall mounting pole 245 mm 38380007 90° angle wall mounting pole 750 mm 38TW43-01 Torque wrench for 4.3-10 39

Product number Description Replacement PageKQ-04272VDAS-43 380-2700 MHz Omni Indoor ceiling antenna AN3838-OI-01-4 9KQ-04272VDAS-43WP 380-2700 MHz Omni Indoor ceiling antenna Water Protected AN3838-OO-01-4 9KQ-07273VDAS-43 698-2700 MHz Indoor Omni Antenna 4.3-10 AN7038-OI-01-4 12KD-04276VDAS-43 380-2700 MHz Directional wall mount antenna AN3838-DI-01-4 16KD-04276VDAS-WP 380-2700 MHz Directional antenna Water protected AN3838-DO-01-4 16KD-07277VDAS 698-2700 MHz Directional indoor wall mount antenna N AN7038-DI-01-4 17KD-07277VDAS-43 698-2700 MHz Directional indoor wall mount antenna 4.3-10 AN7038-DI-01-4 17KD-07278XDAS-43 698-2700 MHz MIMO Indoor directional antenna AN7040-DI-M1-4 18

KD-072714X20-A 790-2700 MHz Xpol 13.5/15 dBi 20° Directional Antenna AN7027-DO-01-4 22BY0727-8G 700-2700 MHz 10 dBi Yagi antenna 0,3m N AN0727-DO-01-N 24BY0727-8G 3m 700-2700 MHz 10 dBi Yagi antenna 3m SMA AN0727-DO-03-S 24BY0727-8G 6m 700-2700 MHz 10 dBi Yagi antenna 6m SMA AN0727-DO-06-S 24BY0727-8G 10m 700-2700 MHz 10 dBi Yagi antenna 10m SMA AN0727-DO-10-S 24HC7027-44-01-4 698-2700 MHz Hybrid combiner 4x4 HC7038-44-01-4 31SP3838-02-01-4 380-3800 MHz 2-way splitter SP3438-02-01-4 33KS-0427C-02W-43 380-2700 MHz 2-way Wideband Low PIM power splitter SP3438-02-01-4 33KS-0427C-03W-43 380-2700 MHz 3-way Wideband Low PIM power splitter SP3438-03-01-4 33KS-0427C-04W-43 380-2700 MHz 4-way Wideband Low PIM power splitter SP3438-04-01-4 33

KQ-07274VDAS 698-2700 MHz Omni Outdoor Antenna AN7027-OO-01-4 21

Replacements for phased out products

Products removed from the catalogProduct number DescriptionPAN0922VP25-10 880-960 MHz / 1920-2170MHz 12 dBi VPol antennaAN8090-DO-01-7 806 - 960 MHz XPOL antenna 14 dBi 0° - 14° TiltRC-01-7 Remote Control Unit (RCU) for AN8090-DO-01-7AT3838-15-XX-01-4 380-3800 MHz Attenuator 15WAT3838-30-XX-01-4 380-3800 MHz Attenuator 30WAT3838-60-XX-01-4 380-3800 MHz Attenuator 60WAT3838-100-XX-01-4 380-3800 MHz Attenuator 100WBY70-7GT 380-430 MHz 9 dBi Yagi antennaBY90-15G 870-960 MHz 17 dBi Yagi antenna

7/40

350-6000 MHz

Low profile Omni ceiling antenna

Dual B ab Address: Box 1253 Tel.:+46 8 7670195

e-mail: [email protected] 18124 Lidingö, Sweden VAT SE556643865001

Product specification AN3560-OI-01-4

20190104/JB

Electrical specificationFrequency Band 350-698 MHz 698-960 MHz 1710-2700 MHz 3300-3800 MHz 4900-6000 MHzGain 3.5 dBi 3.5 dBi 3.5 dBi 4.5 dBi 4.5 dBiVSWR ≤ 1.8 ≤ 1.5 ≤ 1.5 ≤ 1.5 ≤ 1.5PIM, 3rd Order, 2×20W ≤-153 dBcPolarization HorizontalInput Impedance 50 ΩInput Power. Max. 50 Watts

Mechanical specification

Radome color WhiteRadome material ABSDimensions (D x H) Ø 300 x 40.4 mmWeight 700 gCable length 1000 mmConnector 4.3-10 female

Operating temperature from -40°C to +55°CFlammability rating UL 94-V0ROHS CompliantCE certificate Yes

InstallationMounting Ceiling mounting. Maximum ceiling thickness can be 35mm. Drill a hole with a 23-30 mm diameter into

suspended ceiling and secure the antenna with included plastic nut.

Grounding All metal parts inclusive the inner conductors are DC grounded

Environmental specification

Key features

This low profile Low PIM antenna isvertically polarized and operates at350-6000 MHz.

Super wideband antenna does coverall indoor frequency bands includingTETRA, 2G, 3G, 4G, 5G and 5 GHzWiFi.

Fast installation. Additional groundplane or foil is not needed.

Product number: AN3560-OI-01-4

Bottom view Side view Top view

8/40

Key features

The antennais verticallypolarized andoperates at380-3800MHz coveringalso the pub-lic safetyTETRA band

Low PIM va-lue meetshighest re-quirementsfor indoor oroutdoor DAS.

Small size

Fast installati-on. Additionalground planeor foil is notneeded

380-3800 MHz

Omni ceiling antenna



Product specification AN3838-Ox-01-4

Bottom view Side view Top

20191023/JB

Electrical specificationFrequency Band 380-490 MHz 698-960 MHz 1710-2700 MHz 3300-3800 MHzGain 0 dBi 1.5 dBi 5 dBi 5 dBiVSWR ≤2.0PIM, 3rd Order, 2×20W N/APolarization VerticalBeamwidth, Horizontal 360°Input Impedance 50 ΩInput Power. Max. 10 Watts 50 Watts

Mechanical specificationRadome color WhiteRadome material ABS, UV resistantDimensions Ø 186 x 85 mmWeight 380 gCable length 1000 mmConnector 4.3-10 female

Enviromental specificationOperating temperature from -40°C to +60°CFlammability rating UL 94-V0ROHS CompliantCE certificate Yes

InstallationMounting Ceiling mounting. Maximum ceiling thickness can be 35mm.

Drill a hole with a 19-29mm diameter into suspended ceiling and securethe antenna with included plastic nut and aluminium washer.AN3838-OO-01-4 is water protected version for humid environments e.g.tunnels and parking halls.


≤-150 dBc

Product number Connector ApplicationAN3838-OI-01-4 4.3-10 female Indoor

AN3838-OI-01-N N female Indoor

AN3838-OO-01-4 4.3-10 female Humid Indoor

9/40



Product specification AN3838-OI-M1-4

20190614/JB

Electrical specification

Port 1 Port 2

Frequency Band (MHz) 380-490 698-960 1710-2700 3400-3800 698-960 1710-2700 3400-3800

Gain 0 dBi 1.5 dBi 5 dBi 2 dBi 4 dBiVSWR ≤ 2.0 ≤ 1.8 ≤ 1.8 ≤ 1.8 ≤ 1.8

Polarization Vertical Horizontal

Input Power. Max. 10 Watts 50 Watts

PIM, 3rd Order, 2×20W NA ≤-150 dBc @ 698 - 3800 MHz

Beamwidth, horizontal 360°

Input Impedance 50 Ω

Mechanical specificationRadome color WhiteRadome material ABSDimensions (D x H) Ø 300 x 100 mmWeight 850 gCable length & color 2 x 1000 mm WhiteConnector 4.3-10 female (2 pcs)

Environmental specificationOperating temperature from -40°C to +60°CFlammability rating UL 94-V0ROHS CompliantCE certificate YesInstallationMounting Ceiling mounting. Drill a hole with a 24-27mm diameter into suspended ceiling and secure the antenna

with included plastic nut and washer. Maximum ceiling thickness can be 30mm without washer and 27mm with washer.


50 Watts

Isolation, between ports > 20 dB

Key features

This Low PIM MiMo antenna opera-tes at 380-3800 MHz

Wideband antenna does cover allindoor frequency bands includingTETRA, 2G, 3G, 4G, 5G and 5 GHzWiFi.

Fast installation. Additional groundplane or foil is not needed.

Product number: AN3838-OI-M1-4

380-3800 MHz

MiMo Omni ceiling antenna


10/40

698-4000 MHz

Slim Omni ceiling antenna




20191008/JB

Electrical specificationFrequency Band 698-960MHz 1690-2170 MHz 2300-2500 MHz 2500-2700 MHz 3300-4000 MHzGain 3 dBi 4 dBi 4 dBi 5 dBi 3 dBiVertical Beamwidth 120° 85° 76° 70° 62°Horizontal Beamwidth 360°VSWR ≤ 1.8 ≤ 2PIM, 3rd Order, 2×20W ≤-153 dBcPolarization HorizontalInput Impedance 50 ΩInput Power. Max. 50 Watts

Mechanical specification

Radome color WhiteRadome material ABS (UV stabilized)Dimensions (D x H) Ø 190 x 7,3 mmWeight 250 gCable length 1000 mmConnector 4.3-10 female

Environmental specification

Operating temperature from -40°C to +65°CFlammability rating UL 94-V0ROHS CompliantCE certificate Yes

InstallationMounting Ceiling mounting. Maximum ceiling thickness can be 40mm. Drill a hole with a 25-30 mm diameter into

suspended ceiling and secure the antenna with included plastic nut.Grounding All metal parts inclusive the inner conductors are DC grounded

Key features

This low profile Low PIM antennaoperates at 698-4000 MHz.

Wideband antenna does cover in-door frequency bands including 2G,3G, 4G, 5G.

Almost unnoticeable due to very slimdesign.

Product number: AN7040-OI-01-4 Bottom view Side view

11/40

Key features

The antennais verticallypolarized andoperates at698-3800MHz


Small size

Fast installati-on. Additionalground planeor foil is notneeded

698-3800 MHz Omni ceiling antenna





20190129/JB

Electrical specificationFrequency Band 698-800 MHz 800-960 MHz 1710-2700 MHz 3300-3800 MHzGain 1.5 dBi 1.5 dBi 5 dBi 4 dBiVSWR ≤1.8 ≤1.5 ≤1.5 ≤2.0PIM, 3rd Order, 2×20W ≤-150 dBcPolarization VerticalBeamwidth, Horizontal 360°Input Impedance 50 ΩInput Power. Max. 50 Watts



InstallationMounting Ceiling mounting. Maximum ceiling thickness can be 35mm. Drill a hole

with a 19-29mm diameter into suspended ceiling and secure the anten-na with included plastic nut and aluminium washer.


Product number: AN7038-OI-01-4

12/40

Key features

The antennais verticallyand horizon-tally polarizedand operatesat 698-4000MHz


Small size

Fast installati-on

698-4000 MHz Omni MiMo ceiling antenna




20191128/JB

Electrical specificationFrequency Band (both ports) 698-806 MHz 800-960 MHz 1425-2700 MHz 3300-4000 MHzGain 2.5 dBi 3.5 dBi 4.5 dBi 5 dBiBeamwidth, Horizontal 360°Beamwidth, Vertical 95° 90° 46° 38°VSWR ≤2.0 ≤1.8Isolation >19 dB >23 dBPIM, 3rd Order, 2×20W ≤-153 dBcInput Impedance 50 ΩInput Power. Max. 50 Watts

Mechanical specificationRadome color WhiteRadome material ABS, UV stabilizedDimensions Ø 215 x 47 mmWeight 450 gCable length 1000 mm (2 pcs)Connector 4.3-10 female (2 pcs)



with a 24-30mm diameter into suspended ceiling and secure the anten-na with included plastic nut.



13/40

14/40

Key features

The antennais linear hori-zontally pola-rized andoperates at698-4000MHz


Fast installati-on

Slim design

698-4000 MHz Slim Omni MiMo ceiling antenna




20191128/JB

Electrical specificationFrequency Band (both ports) 698-806 MHz 1425-2170 MHz 2300-2700 MHz 3300-4000 MHzGain 3 dBi 4 dBi 6 dBi 5.5 dBiBeamwidth, Horizontal 360°Beamwidth, Vertical 110° 68° 29° 30°VSWR ≤2.0 ≤1.8Isolation >20 dBPIM, 3rd Order, 2×20W ≤-150 dBcInput Impedance 50 ΩInput Power. Max. 50 Watts

Mechanical specificationRadome color WhiteRadome material ABS, UV stabilizedDimensions Ø 280 x 19 mmWeight 550 gCable length 1000 mm (2 pcs)Connector 4.3-10 female (2 pcs)



with a 31-38mm diameter into suspended ceiling and secure the antennawith included plastic nut.


>23 dB


Key features

Linear pola-rized andoperates at698-2700MHz

Full rangeMIMO in bothports

Low PIM va-lue meetshighest re-quirements

4.3-10 con-nectorenables stab-le PIM forevery connec-tion

Fast installati-on

698-2700 MHz MIMO Omni indoor ceiling mount antenna



20180320/JB

Electrical specificationFrequency Band (both ports) 698-800 MHz 800-960 MHz 1710-2700 MHzGain 2.5 dBi 2.5 dBi 5 dBiVSWR ≤1.6 ≤1.6 ≤1.6PIM, 3rd Order, 2×20W ≤-150 dBc ≤-150 dBc ≤-150 dBc

Polarization LinearBeamwidth, Horizontal 360°Input Impedance 50 ΩInput Power. Max. 50 Watts

Mechanical specificationRadome color WhiteRadome material ABS, UV resistantDimensions Ø 215 x 42 mmWeight 450 gCable length 2 x 1000 mmConnector 4.3-10 female (2 pcs)



with a 19-29mm diameter into suspended ceiling and secure theantenna with included plastic nut and aluminium washer.


Isolation, dB - 18 - 20 - 20


Product specification KQ-07274H2DAS-43

15/40

Product number: KQ-07274H2DAS-43

Key features

The antennais verticallypolarized andoperates at380-3800MHz coveringalso the pub-lic safety fre-quency bandfor TETRA.

Low PIM va-lues meetshighest re-quirementsfor indoor oroutdoor DAS

Easy installa-tion

380-3800 MHz

Directional wall mount antenna



Product specification AN3838-Dx-01-4

Electrical specificationFrequency Band 380-400 MHz 400-490 MHz 698-960 MHz 1710-2700 MHz 3400-3800 MHzGain 2 dBi 5 dBi 8 dBi 8 dBiVSWR ≤2.0 ≤2.35 ≤2.0PIM, 3rd Order, 2×20W N/A ≤-150 dBcBeamwidth, Horizontal >120° 100° 65° 64°Beamwidth, Vertical 90° 75° 60° 59°Polarization VerticalInput Impedance 50 ΩInput Power max. 50 Watts

Mechanical specificationRadome color WhiteRadome material ABS, UV resistantDimensions (HxWxD) 280 x 160 x 60 mmWeight 700 gCable length 1000 mmConnector 4.3-10 female


InstallationMounting After affixing the mounting plate (included) to the wall, then mount the antenna

on to the mounting plate by sliding it into the slot. Can be installed cable up- ordownwards. 50 mm space is required above the antenna. Four screws andscrew plugs are included.AN3838-DO-01-4 is water protected version for humid environments e.g. tun-nels and parking halls.


20191023/JB

Front view Side view Back view

Product number Connector ApplicationAN3838-DI-01-4 4.3-10 female Indoor

AN3838-DO-01-4 4.3-10 female Humid Indoor

16/40

Key features


Suitable forindoor appli-cations suchas DAS

Low PIM va-lue meetshighest re-quirementsfor indoorDAS

4.3-10 con-nectorenables stab-le PIM forevery connec-tion

Easy installa-tion



Product specification AN7038-DI-01-4

20190124/JB

Electrical specificationFrequency Band 698-800 MHz 800-960 MHz 1710-2700 MHz 3400-3800 MHzGain 5 dBi 6 dBi 8 dBi 8 dBiBeamwidth, Horizontal 100° 100° 65° 64°Beamwidth, Vertical 75° 70° 60° 59°VSWR ≤2.0PIM, 3rd Order, 2×20W ≤-150 dBcPolarization VerticalInput Impedance 50 ΩInput Power. Max. 50 Watts

Mechanical specificationRadome color WhiteRadome material ABS, UV resistantDimensions (H x W x D) 165 x 155 x 45 mmWeight 380 gCable length 1000 mmConnector 4.3-10 female


InstallationMounting Wall mounting. After affixing the mounting plate (included) to the wall,

then mount the antenna on to the mounting plate by sliding it into theslot. 50 mm space is required above the antenna. Three screws andscrew plugs are included.


698-3800 MHz

Directional indoor wall mount antenna

Product number: AN7038-DI-01-4

17/40

Key features

Vertically andhorizontallypolarized

Operates at698-4000MHz

Full rangeMIMO in bothports


4.3-10 con-nectorenables stab-le PIM forevery con-nection

Easy installa-tion

698-4000 MHz Directional MiMo wall antenna



20191120/JB

Electrical specificationFrequency Band (both ports) 698-960 MHz 1710-2700 MHz 3300-4000 MHzGain 5.5 dBi 8.5 dBi 7 dBiVSWR ≤ 2.0 ≤ 1.8 ≤ 2.0Beamwidth, Horizontal 90° 65° 45°Beamwidth, Vertical 78° 60° 38°PIM, 3rd Order, 2×20W ≤-153 dBcIsolation (typ.) 20 dBPolarization ±45°Input Impedance 50 ΩInput Power. Max. 50 Watts

Mechanical specificationRadome color WhiteRadome material ABS, UV stabilizedDimensions (H x W x D) 315 x 195 x 68 mmWeight 650 gCable length 2 x 1000 mmConnector 4.3-10 female (2 pcs)



then mount the antenna on to the mounting plate by sliding it into theslot. 50 mm space is required above the antenna.


Product specification AN7040-DI-M1-4

Product number: AN7040-DI-M1-4

18/40

Key features

4 port MiMoindoor anten-na

For 2G, 3G,4G and 5Gfrequencybands




698-3800 MHz Directional MiMo wall antenna 4 ports

20191111/JB

Electrical specificationFrequency Band (all ports) 698-960 MHz 1710-2700 MHz 3300-3800 MHzGain 6 dBi 8 dBiBeamwidth, Horizontal 75±15° 60±15° 65±15°Beamwidth, Vertical 75° 55° 35°Front to back ratio ≥15 dB ≥25 dB ≥20 dBIsolation ≥18 dB ≥20 dB ≥25 dBVSWR ≤ 1.8PIM, 3rd Order, 2×20W ≤-150 dBcPolarization ±45°Input Impedance 50 ΩInput Power. Max. 50 Watts

Mechanical specificationRadome color WhiteRadome material ABSDimensions (W x H xD) 410 x 305 x 84 mmWeight 2 kgCable length 4 x 1000 mmConnector 4.3-10 female (4 pcs)

Enviromental specificationOperating temperature from -40°C to +60°CFlammability rating UL 94-V0ROHS CompliantCE certificate YesApplication Indoor


then mount the antenna on to the mounting plate by sliding it into theslot. 50 mm space is required above the antenna.


Product specification AN7038-DI-M1-4

Product number: AN7038-DI-M1-4

19/40

Key features

Small sizeantenna for2G, 3G, 4Gand 5G fre-quency bands

Vertical pola-rized


Versatile in-stallation on awall or a pole

Suitable forOutdoor use

698-3800 MHz Omni Outdoor Antenna



20191003/JB

Electrical specificationFrequency Band 698-960 MHz 1710-2700 MHz 3400-3800 MHzGain 3 dBi 5 dBiVSWR ≤ 1.8PIM, 3rd Order, 2×20WPolarization VerticalBeamwidth, Horizontal 360°Input Impedance 50 ΩInput Power. Max. 100 Watts

Mechanical specificationRadome color WhiteRadome material ABS, UV resistantDimensions 200 x 65 x 65 mmWeight 450 gCable length 1000 mmConnector 4.3-10 female

Enviromental specificationOperating temperature from -40°C to +60°CFlammability rating UL 94-V0ROHS CompliantCE certificate YesApplication Outdoor / Indoor

InstallationMounting Mounting on a wall or a pole with 30-50 mm diameter. Mounting bracket

and clamps are included.Grounding All metal parts inclusive the inner conductors are DC grounded

≤-150 dBc

Product specification AN7038-OO-01-4

Product number: AN7038-OO-01-4

20/3720/40

Key features

Small sizeantenna for2G, 3G and4G frequencybands

Vertical pola-rized


Versatile in-stallation on awall or a pole

Suitable forOutdoor use

698-2700 MHz Omni Outdoor Antenna



20191205/JB

Electrical specificationFrequency Band 698-800 MHz 800-960 MHz 1710-2700 MHzGain 3 dBi 3 dBi 5 dBiVSWR ≤2.0 ≤1.6 ≤1.6PIM, 3rd Order, 2×20W ≤-150 dBc ≤-150 dBc ≤-150 dBcPolarization VerticalBeamwidth, Horizontal 360°Input Impedance 50 ΩInput Power. Max. 100 Watts



InstallationMounting Mounting on a wall or a pole with 30-50 mm diameter. Mounting bracket

and clamps are included.


Application Outdoor / Indoor

Product specification AN7027-OO-01-4

Product number: AN7027-OO-01-4

21/40

Key features

High gainnarrow beamXPOL anten-na for MIMOand repeaterapplications



4.3-10connectorenables stab-le PIM forevery connec-tion

Pole installa-tion



20191125/JB

Electrical specificationFrequency Band (both ports) 698-800 MHz 800-960MHz 1710-2700 MHzGain 13 dBi 13.5 dBi 15 dBiVSWR ≤1.68 ≤1.68 ≤1.68Beamwidth, Horizontal 22° 20° 14°Beamwidth, Vertical 68° 65° 60°Front to back ratio @ 180° 23 dB 25 dB 25 dBPIM, 3rd Order, 2×20W ≤-150 dBcIsolation between ports ≤- 25 dBPolarization ±45°Input Impedance 50 ΩInput Power. Max. 300 W

Mechanical specificationRadome color WhiteRadome material PVC, UV resistantConnector 4.3-10 female (2 pcs)Dimensions (W x H x D) 830 x 280 x 125 mmWeight 8.6 kg

PackagingPackaging dimensions (W x H x D) 885 x 380 x 210 mmPackaging weight 10.5 kg

Enviromental specificationOperating temperature from -40°C to +60°CMax. wind velocity 216 km/hROHS CompliantCE certificate Yes

InstallationMounting Mounting on a pole with 35-90 mm diameter. Mounting clamps

are included.Grounding All metal parts inclusive the inner conductors are DC grounded

Product specification AN7027-DO-01-4

698-2700 MHz

Xpol Directional Antenna 13.5/15 dBi 20/14°

Product number: AN7027-DO-01-4

22/40

Key features

XPOL anten-na for outdoorapplications


4.3-10connectorenables stab-le PIM forevery connec-tion

Pole installa-tion



20180321/JB

Electrical specificationFrequency Band (both ports) 698-800 MHz 800-960 MHz 1710-2170 MHz 2170-2700 MHzGain 11.5 dBi 12 dBi 12 dBi 12 dBiVSWR ≤1.8 ≤1.5 ≤1.5 ≤1.5Beamwidth, Horizontal 68° 65° 60° 55°Beamwidth, Vertical 33° 30° 30° 28°Front to back ratio @ 180° 24 dB 25 dB 25 dB 25 dBPIM, 3rd Order, 2×20W ≤-150 dBcIsolation between ports ≤- 25 dBPolarization ±45°Input Impedance 50 ΩInput Power. Max. 300 W

Mechanical specificationRadome color WhiteRadome material PVC, UV resistantConnector 4.3-10 female (2 pcs)Dimensions (H x W x D) 560 x 280 x 125 mmWeight 5 kg

PackagingPackaging dimensions (H x W x D) 575 x 290 x 190 mmPackaging weight 6,5 kg

Environmental specificationOperating temperature from –35°C to +55°CMax. wind velocity 216 km/hROHS CompliantCE certificate Yes

InstallationMounting Mounting on a pole with 50 - 90 mm diameter. Mounting clamps


Product specification KD-072712X65-43

698 - 2700 MHz Xpol Directional Antenna 12 dBi 65°

Product number: KD-072712X65-43

Connector 2Connector 1

23/40

Key features

The antennais vertically orhorizontallypolarized andoperates at700-2700MHz

Suitable formany applica-tions as for4G modems

Robust const-ruction forlong life ope-ration

High gain

Mountingbracket withdowntilt



Product specification AN0727-DO-xx-x

20190329/JB

Electrical specificationFrequency Band 698 - 960 MHz 1710 - 2700 MHzGain See table aboveVSWR ≤ 1.5Polarization Vertical or HorizontalBeamwidth - 3 dB, Vertical / Horizontal 58° / 70°Front to back ratio > 16 dBInput Impedance 50 ΩInput Power. Max. 50 Watts

Mechanical specificationRadome color WhiteRadome material FiberglassDimensions (L x H x W) 442 x 205 x 37 mmWeight 1000 gCable length See table aboveConnector See table aboveMax. wind velocity > 200 km/h

Enviromental specificationOperating temperature from -40°C to +85°CROHS CompliantCE certificate Yes

InstallationMounting Pole mounting. Mounting bracket with downtilt is included and

it is compatible with Ø 30-50 mm pole.Grounding Metal parts inclusive the inner conductors are DC grounded

Product number Connector Cable lengthAN0727-DO-01-N N female 0,3 m

AN0727-DO-03-S SMA male 3 m



Gain 1710 - 2700 MHz9.6 - 10.6 dBi

9.2 - 10.1 dBi

8.8 - 9.6 dBi

8.3 - 8.9 dBi

Gain 698 - 960 MHz9.5 - 10.5 dBi

9.3 - 10.2 dBi

9.0 - 9.9 dBi

8.7 - 9.5 dBi

698-2700 MHz 10 dBi

Yagi antenna

24/40

Key features


Ideal forTETRA re-peater soluti-ons


380-400 MHz 11 dBi Directional panel antenna



Product specification PAN390PV9G90

20191024/JB

Electrical specificationFrequency band 380-400 MHzMax. Input power 250 WGain 11 dBiVSWR ≤ 1.3Polarization VerticalBeamwidth, Vertical / Horizontal 30° / 90°Front to back ratio > 20 dBInput Impedance 50 Ω

Mechanical specificationRadome color Light grayRadome material ASADimensions (H x W x D) 1310 x 300 x 130 mmWeight 9 kgMax. wind velocity 200 km/hConnector N female

Enviromental specificationOperating temperature from -40°C to +60°CROHS CompliantCE certificate Yes

InstallationMounting Pole mounting. Mounting clamps and mechanical tilt are

included.Grounding Metal parts inclusive the inner conductors are DC grounded

Downtilt 0-15°

Product number: PAN390PV9G90

25/40

Key features

Outdoor an-tenna for ap-plications likeTETRA

Operates at380-430 MHz


Vertical orHorizontalpolarized

Pole installa-tion



20180504/JB

Electrical specificationFrequency Band 380-430 MHzGain 12.2 dBiVSWR ≤1.5Beamwidth, Horizontal 46°Beamwidth, Vertical 52°Front to back ratio @ 180° 18 dBElements 7Polarization Vertical or HorizontalInput Impedance 50 ΩInput Power. Max. 150 W

Mechanical specificationRadome color Painted black epoxyRadome material AluminiumCable length 30 cm

Length 1,3 mWeight 3 kg

Environmental specificationOperating temperature from –40°C to +85°CMax. wind velocity 160 km/hROHS CompliantCE certificate Yes

InstallationMounting Mounting on a pole with 35-60 mm diameter. Mounting clamps


Connector N female

Product specification BY70-10GT

380-430 MHz 12 dBi Yagi antenna

Product number: BY70-10GT

26/40



Product specification DC1027-12-01-4

20190911/JB

68-490 / 698-2690 MHz Dual-band combiner

Key features

Designed forthe decoupledcombining of2 transmitteror receiversignals anddistributingthese signalsequally ontoone antennaoutput

Pole or wallmounting

For indoorand outdooruse

Built in light-ning protec-tion

Electrical specificationFrequency band (Port 1 / Port 2) 68 - 490 / 698 - 2690 MHzInsertion loss (Port 1 / Port 2) ≤ 0.25 dB / ≤ 0.25 dBVSWR ≤ 1.25Isolation (Port 1 / Port 2) ≥ 50 dB / ≥ 50 dBPIM, 3rd Order, 2×20W ≤-160 dBcInput Impedance 50 ΩInput Power per port . Max. 500 WDC/AISG Bypass (Port 1 / Port 2) Pass (max. 2500 mA) / Stop

Mechanical specificationColor Light grayConnectors 4.3-10 femaleDimensions (L x W x H) . Excludingconnectors and mounting bracket 247 x 123 x 49 mm

Weight 2.5 kg

Environmental specificationOperating temperature from -40°C to +65°IP rating IP68ROHS CompliantCE certificate Yes

InstallationMounting Pole or wall mounting. Mounting clamps are included and they

are compatible for Ø35 - 125 mm pole. Can be mounted on a wallby screws (not included).

Relative humidity ≤ 95 %Lightning protection 10 kA; 8/20 µs pulse

Product number: DC1027-12-01-4

27/40




20190610JB

698-2700 / 3400-3800MHz Dual-band combiner

Key features


Pole or wallmounting


Built in light-ning protecti-on

Electrical specificationFrequency band 698 - 2700 / 3400 - 3800 MHzInsertion loss (Port 1 / Port 2) ≤ 0.35 dB / ≤ 0.35 dBVSWR ≤ 1.22Isolation (Port 1 / Port 2) ≥ 50 dB / ≥ 50 dBPIM, 3rd Order, 2×20W ≤-160 dBcInput Impedance 50 ΩInput Power per port . Max. 300 WDC/AISG Pass

Mechanical specificationColor Light grayConnectors 4.3-10 femaleDimensions (L x W x H) . Excludingconnectors and mounting bracket 217 x 97 x 47 mm

Weight (including mounting bracket) 1.35 kg


InstallationMounting Pole or wall mounting. Mounting clamps are included and they

are compatible for Ø35 - 125 mm pole. Can be mounted on awall by screws (not included).

Relative humidity ≤ 95 %Lightning protection 3 kA; 10/350 µs pulse

Product number: DC7038-12-01-4

28/40




20191126/JB

Product number : DC0740-24-01-4

Key features


Double unit


Lightning pro-tection

Electrical specificationFrequency Band 68 - 2700 MHz / 3300– 4000 MHzInsertion loss Port 1 / Port 2 ≤ 0.5 dB / ≤ 0.5 dBVSWR ≤ 1.25Isolation ≥ 50 dBPIM, 3rd Order, 2×20W ≤-160 dBcInput Impedance 50 ΩInput Power per port < 200 W

Color Light grayConnectors 4.3-10 femaleDimensions (L x W x H) 320 x 94 x 120 mmWeight 2.4 kg

Environmental specificationOperating temperature from -30°C to +60°IP rating IP67Operational humidity ≤ 95 %ROHS CompliantCE certificate Yes

InstallationMounting Pole or wall mounting. Clamps included for Ø 35-125 mm pole.

Peak power < 1500 W

Lightning protection 10kA; 8/20 µs pulse

DC/AISG Bypass Pass@68-2700 / Stop 3300-4000 Mhz

68-2700 / 3300-4000 MHz Dual-band Combiner Double unit

29/40



Product specification HC3427-44-01-4

20191031/JB

Product number : HC3427-44-01-4

Key features

Designed forthe decoupledcombining of4 transmitteror receiversignals anddistributingthese signalsequally onto 4antenna out-puts

Low PIM


Electrical specificationFrequency band (all ports) 340 - 2700 MHzInsertion loss ≤ 6.2dB ±1.2dB@340 - 698 MHz ±0.8dB@698 - 2700 MHzVSWR ≤ 1.25Isolation ≥ 25 dBcPIM, 3rd Order, 2×20W ≤-160 dBcInput Impedance 50 ΩInput Power per port . Max. 300 W

Mechanical specificationColor Light grayConnectors 4.3-10 female

Dimensions (L x W x H) exclu- 380 x 150 x 35 mm

Weight 3.8 kg

Environmental specificationOperating temperature from -35°C to +85°IP rating IP65Relative humidity ≤ 95 %ROHS CompliantCE certificate Yes

InstallationMounting Wall mounting by screws (not included)

340-2700 MHz Hybrid combiner 4x4

30/40




20190123/JB



Key features


4.3-10 con-nectors


Electrical specificationFrequency Band (all ports) 698 - 2700 MHzInsertion loss 5.0 ±1.2 dBVSWR 1.25Isolation ≥ 25 dBcPIM, 3rd Order, 2×20W ≤-155 dBcInput Impedance 50 ΩInput Power per port . Max. 150 WDC/AISG DC path IN 1 → OUT 3, IN 2 → OUT 2, IN 3 → OUT 1

Mechanical specificationColor GreyConnectors 4.3-10 femaleDimensions (L x W x H) 328 x 114 x 30 mmWeight 2 kg


InstallationMounting Combiner can be mounted by screws (not included).

Relative humidity 5 - 95 %

Both ends of the Hybrid haveslots for a mounting purpose(Picture taken from back side

of the Hybrid)

31/40




20191107/JB


Key features


4.3-10 con-nectors


Electrical specificationFrequency Band (all ports) 698 - 3800 MHzInsertion loss ≤ 6 ±0.9 dBVSWR ≤ 1.25@698-2700 MHz / ≤ 1.3@2700-3800 MHzIsolation ≥ 25 dBcPIM, 3rd Order, 2×20W ≤-160 dBcInput Impedance 50 ΩInput Power per port < 300 W

Mechanical specificationColor Light greyConnectors 4.3-10 femaleDimensions (L x W x H) 197 x 96.4 x 66 mmWeight 2.3 kg

Environmental specificationOperating temperature from –40°C to +65°IP rating IP65Operational humidity ≤ 5 - 95 %ROHS CompliantCE certificate Yes

InstallationMounting Pole or wall mounting

Peak power < 1500 W


32/40

Key features

Versatile formany fre-quency bandsas for Tetra,LTE450, 2G,3G, 4G, 5Gand WiFi

No connec-tors on anot-her side. Re-quires lessspace whencables areconnected


Mountingbracket isincluded


340-3800 MHz Power splitters



Product specification SP3438-0x-01-4

SP3438-02-01-4 SP3438-03-01-4 SP3438-04-01-4 Mounting bracket

20190919/JB

Electrical specificationProduct number SP3438-02-01-4 SP3438-03-01-4 SP3438-04-01-4Number of split ways 2 3 4Split loss 3 dB 4.8 dB 6 dB

Insertion loss ≤ 0.3 ≤ 0.6 ≤ 0.6

PIM, 3rd Order, 2×20W ≤ -160 dBc (698 – 3800 MHz)

VSWR ≤ 1.25 @ 340-2700MHz & ≤ 1.29 @ 3400-3800 MHz

Input Impedance 50 ΩInput Power. Max. 300 W

Mechanical specificationColor Light grayMaterial Aluminium alloyDimensions (L x W x H).Excluding connectors andmounting bracket.

251.3 x 25 x 25 mm 272.5 x 25 x 25 mm 339.4 x 25 x 25 mm

Weight 480 g 550 g 680 gConnector 4.3-10 female

Enviromental specificationOperating temperature from - 45°C to + 65°CIP rating IP 65ROHS CompliantCE certificate YesRelative humidity ≤ 95 %

InstallationMounting Mounting bracket (included) has two holes for mounting. Bracket screw

shall to be tightened to hold a splitter in firm position.

Frequency band 340 - 3800 MHz

33/40


e-mail: [email protected] 18124 Lidingö. Sweden VAT SE556643865001

Product specification TA3559-xx-01-4

20191128/JB

Electrical specification Product number TA3559-xx-01-4. See variant (xx) number below.

Frequency band 350 - 960 MHz & 1710 - 5925 MHzPIM. 3rd Order. 2×20W ≤ -161 dBcInput Impedance 50 ΩInput Power 500 WPeak Power 3000 W

Mechanical specificationColor SilverMaterial Aluminium alloyDimensions (L x W x H) 94 x 23 x 23 mmWeight 380 gConnectors 4.3-10 female

Enviromental specificationOperating temperature from - 35°C to + 75°CIP rating IP 65ROHS CompliantCE certificate YesRelative humidity ≤ 95 %

InstallationMounting Mounting bracket (included) has two holes for mounting by screws

Variant Main/BranchOutput Split. dB

Branch Flatness to Input Level (Include Loss). dB Max Input VSWR350-380 380-520 698-960 1710-2700 3500-4500 4900-5925 698-2700 350-5925

05 -1.8/-4.8 +0/-1.3 +0.3/-1.0 ±0.5 ±0.5 +0/-1.5 ± 0.5 1.3 1.406 -1.3/-6.1 +0/-1.3 +0.3/-0.8 ±0.5 ±0.5 +0/-1.5 ± 0.5 1.2 1.307 -1.0/-7.0 +0/-1.3 +0.3/-0.8 ±0.5 ±0.5 +0/-1.5 ± 0.5 1.2 1.308 -0.7/-8.6 +0/-1.3 +0.3/-0.5 ±0.5 ±0.5 +0/-1.5 ± 0.5 1.2 1.310 -0.4/-10.4 +0/-1.3 +0.3/-0.5 ±0.5 ±0.5 +0/-1.5 ± 0.6 1.2 1.313 -0.2/-13.2 ±1.0 ±0.6 ±0.6 ±0.6 +0/-1.5 ± 0.6 1.2 1.315 -0.1/-15.1 ±1.0 ±0.7 ±0.7 ±0.7 +0/-1.5 ± 1.0 1.2 1.320 -0.1/-20.1 ±1.0 ±1.0 ±1.0 ±0.7 +2/-0 +4/-0 1.2 1.230 -0.1/-30.1 ±1.0 ±1.5 ±1.0 ±0.7 +2/-1 +4/-0 1.2 1.2

Key features

Versatile e.g. for Tetra, LTE450, 2G,3G, 4G, 5G and WiFi

Very Low PIM value For indoor and outdoor use

350 - 960 MHz / 1710 - 5925 MHzWideband Low PIM power tappers

34/40

350-2700 MHz Tappers



Product specification KTP-0x-43

20190128/JB

Electrical specificationProduct number KTP-05-43 KTP-06-43 KTP-07-43 KTP-10-43 KTP-15-43 KTP-20-43 KTP-30-43Output split ratio nom.

2:1 / 3.0 dB 3:1 / 4.8 dB 4:1 / 6 dB 10:1 / 10 dB 30:1 / 15 dB 100:1 /20 dB 1000:1 / 30 dB(dB inequality between outputs)

Output split Main / Branch -1.8/-4.8 dB -1.3/-6.1 dB -0.97/-7 dB -0.4/-10.4 dB -0.1/-15.1 dB -0.1/-20.1 dB -0.1/-30.1 dB

Branch flatness 350-960 MHz ±1.2 ±1.2 ±1.2 ±1.0 ±1.0 ±1.2±1.5

1710 - 2700 MHz ±0.6 ±0.6 ±0.6 ±0.6 ±0.6 ±0.6Input VSWR 350 - 960 MHz ≤ 1.35:1 ≤ 1.30:1 ≤ 1.30:1

≤ 1.25:1 ≤ 1.25:1 ≤ 1.25:1 ≤ 1.25:11710 - 2700 MHz ≤ 1.25:1 ≤ 1.25:1 ≤ 1.25:1

PIM, 3rd Order, 2×20W698-2700 MHz ≤ -153 dBc

Input Impedance 50 ΩInput Power. Max. 300 W

Mechanical specificationColor BlackMaterial AluminiumDimensions (L x W x H) 147 x 25 x 43 mmWeight 286 gConnectors 4.3-10 female

Enviromental specificationOperating temperature from - 35°C to + 85°CIP rating IP 65ROHS CompliantCE certificate YesRelative humidity 5 - 95 %

InstallationMounting Mounting bracket (included) has two holes for mounting. Bracket screws shall to be tightened to

Mounting bracket

Key features

Versatile for many frequency bandsas for Tetra, LTE450, 2G, 3G, 4Gand WiFi

Low PIM values with 4.3-10 connec-tors meets highest requirements

For indoor and outdoor use

35/40

0-3800 MHz RF Terminators



Product specification TE0038-xxx-01-4

20190129/JB

Electrical specificationProduct number TE0038-10-01-4 TE0038-25-01-4 TE0038-50-01-4 TE0038-100-01-4Input Power. Max. 10 W 25 W 50 W 100 WPIM, 3rd Order, 698-3800 MHz ≤ -150 dBc (2 x 2W) ≤ -160 dBc (2 x 20 W)Frequency band 0 - 3800 MHzVSWR (698-3800 MHz) ≤ 1.25Input Impedance 50 Ω

Mechanical specificationMaterial AluminiumDimensions (D x L) / ( L x W x H) Ø 52 x 144 mm Ø 52 x 144 mm Ø 52 x 192 mm 275 x 110 x 75 mmWeight 680 g 680 g 920 g 2 kgConnectors 4.3-10 female

Enviromental specificationOperating temperature from - 55°C to + 65°CIP rating IP 66ROHS CompliantCE certificate Yes

InstallationMounting Tighten with stainless steel band clamps (2 pcs included) on to pole mast.

TE0038-100-01-4 can be mounted also on a wall.

Key features

Suitable for terminating open portson RF equipment

Low PIM values with 4.3-10 connec-tors

For indoor and outdoor use

100W10W, 25W & 50W

36/40



20190128/JB

Mechanical specificationMaterial Stainless steelMaterial thickness 1 mmDimensions (H x W) 100 x 40 mmSize of thread rod Max. Ø 10 mm

InstallationMounting U-shape mounting part shall be tighten between antenna’s plastic nut and another nut

which comes along with the mounting bracket. Top of the mounting bracket shall betighten between two nuts in the thread rod.

Note. Size of the opening in the mounting bracket for thread rod is 10,5 mm. Usewashers with small rods when required.

Product specification MOS-01

Mounting kit for omni antennas

Product number : MOS-01

MOS-01 mounting kit contains U-shape mounting bracket and plastic nut

Key features

Avoid PIM issues and ground poten-tial differencial issues. Prevents gal-vanic connection to other metalstructures.

Omni antenna installation to threadrod or cable ladder

Robust and corrosion proof material

Compatible e.g. with KQ-04272VDAS, KQ-07274H2DAS-43,AN3838-OI-01-4, AN7038-OI-01-4antennas

37/40

90° angle wall mounting pole



Product specification 380002 & 380007

20180508/JB

Mechanical specificationProduct number 380002 380007

Height of the pole 250 mm 750 mm

Diameter of the pole 30 mmPole distance from a wall 345 mmMounting Mounting to a wall by 5 screwsMaterial S275J2H Steel

380002 380007

Key features Wall mounting pole for donor antennas

Compatible with BY0727-8G, BY70-7G(T), BY70-15G(T)

38/40

Key features

Torque wrenchfor 4.3-10 con-nectors

Ensures correcttorque force andgood connectionto counterpartconnector

Robust structure

Will give audible“click” soundand vibration tothe handle whenthe wrench hasreached the 5Nm torque

Torque Wrench for coupling torque of 4.3-10 connectors



Product specification TW43-01

20181011/JB

SpecificationPreset torque 5 NmTorque tolerance -0 / +2 Nm

Mechanical specificationMaterial Chromium steelROHS Compliant

Dimensions of the wrenchWrench opening 22 mmDriving end thickness 6 mmDiameter of the handle 16 mmLength 160 mm

Weight 170 g

Dimensions of the packingHeight and width 45 mmLength 240 mmWeight 240 g

Product number: TW43-01

39/40

Didn’t find the product you were looking for?All products are not listed in the catalog

20190211

Ask us!Tel. +46 8 7670195 [email protected]

Find the latest product news from our web page

www.dualb.se

40/40
www.dualb.se

Documents

Antenna system components Product catalogue 2020AN3838-OI-M1-4 380-3800 MHz MiMo Omni ceiling antenna 4.3-10 female 10 AN7040-OI-01-4 698-4000 MHz Slim Omni ceiling antenna 4.3-10