ANSI-ASQ National Accreditation Boardaclass.jadianonline.com/eqm/client/docs/1ed384cb-6e8b-42dd-b995-a… · This laboratory is accredited in accordance with the recognized International

This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005.

This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory

quality management system (refer to joint ISO-ILAC-IAF Communiqué dated January 2009).

CERTIFICATE OF ACCREDITATION

ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044

This is to certify that

ANSECO Group, LLC 4455 Genesee Street

Buffalo NY 14225

has been assessed by ANAB

and meets the requirements of international standard

ISO/IEC 17025:2005

while demonstrating technical competence in the field of

TESTING

Refer to the accompanying Scope of Accreditation for information regarding the types of

tests to which this accreditation applies.

AT-1407

Certificate Number

Certificate Valid: 08/16/2016-09/17/2017 Version No. 002 Issued: 08/16/2016

Version 002 Issued: 08/16/2016 Page 1 of 26

│ │ │

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

ANSECO Group, LLC 4455 Genesee Street, Buffalo, NY 14225

Daniel Sabou Phone: 716-635-1180, ext. 315

[email protected] www.ansecogroup.com

TESTING

Valid to: September 17, 2017 Certificate Number: AT – 1407

I. Chemical

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY

Children’s products’

surface coatings

Total lead in support of:

16 CFR 1303

(Canada) Toys Regulations

(SOR/2011-17) sec. 23(a)

(Canada) Surface Coating Materials

Regulations (SOR/2016-193)

CPSC-CH-E1003-09.1

(HotBlock or microwave

digestion)

ICP-OES

mailto:[email protected]


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY

EQUIPMENT OR

TECHNOLOGY


surface coatings

Total, antimony, arsenic, barium,

cadmium, chromium, lead, mercury,

selenium, in support of:

16 CFR 1303


(SOR/2011-17) sec. 23(a), 23(b)

and 23(c) with amendment

SOR/2016-195)

(Canada) Surface Coating Materials


F963-11 § 4.3.5.1(1) total screen for

Sb, As, Ba, Cd, Pb, Cr, Hg, Se

Regulation (EC) No 1907/2006

(REACH)

CPSC-CH-E1003-09.1

[cited in ASTM F963-11

§ 8.3.1.1(3)]

as modified by

ASTM F963-11 § 8.3.1.2


digestion)

ICP-OES

Children’s metal

products including

metal jewelry

and other consumer

products of metal


CPSIA § 101

(Canada) Consumer Products

Containing Lead (Contact with

Mouth) Regulations

(SOR/2016-171)

(Canada) Children’s Jewelry

Regulations

(SOR/2016-168)

CPSC-CH-E1001-08.1 or

CPSC-CH-E1001-08.3


digestion)

ICP-OES


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY

EQUIPMENT OR

TECHNOLOGY

Children’s metal

products including

metal jewelry

and other consumer

products of metal

Total lead, cadmium in support of:

CPSIA § 101

ASTM F963-11 sec. 4.3.5.2(2)(a)

total screen for Cd, Pb



Mouth) Regulations

(SOR/2016-171)


Regulations

(SOR/2016-168)


(REACH)


CPSC-CH-E1001-08.3


§ 8.3.1.1(1)]

as modified by

ASTM F963-11 § 8.3.1.2


digestion)

ICP-OES

Children’s non-metal

products (plastics,

polymers and non-

siliceous materials)

and other consumer

products of non-metal


CPSIA § 101



Mouth) Regulations

(SOR/2016-171)




CPSC-CH-E1002-08.3

(microwave digestion)

ICP-OES


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY

EQUIPMENT OR

TECHNOLOGY

Children’s non-metal

products (plastics,

polymers and non-

siliceous materials)

and other consumer

products of non-metal

Total antimony, arsenic, barium,

cadmium, chromium, lead, mercury,

selenium, in support of:

CPSIA § 101

ASTM F963-11 sec. 4.3.5.2(2)(a)

total screen for

Sb, As, Ba, Cd, Pb, Cr, Hg, Se



Mouth) Regulations

(SOR/2016-171)


Regulations

(SOR/2016-168)


(REACH)


CPSC-CH-E1002-08.3


§ 8.3.1.1(2)]

as modified by

ASTM F963-11 § 8.3.1.2


ICP-OES


surface coatings

Soluble / Migration of certain

elements (Al, Sb, As, Ba, B, Cd,

Cr, Co, Cu, Pb, Mn, Hg, Ni, Se, Sr,

Sn, Zn) in support of:

Soluble Test for Metals

ASTM F963-11 section 4.3.5.1(2)

European Directive 2009/48/EC

Part 3 of Annex II

ASTM F963-11 section 8.3.4

EN 71-3:2013 sections 7.3.3.1,

7.4.3.1

AS/NZS ISO 8124.3:2012

section 8.1

ISO 8124-3:2010/AMD1:2014

section 8.1

ICP-OES


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY

EQUIPMENT OR

TECHNOLOGY

Toys, jewelry and

other consumer

products (glass,

ceramic, metal)





ASTM F963-11 sec. 4.3.5.2(2)(b)

European Directive 2009/48/EC Part 3 of Annex II

Migratable lead and cadmium


Regulations

(SOR/2016-168)

ASTM F963-11 sec. 8.3.5.5 and

8.3.5.5(2)

(glass, ceramic, metal)

EN 71-3:2013 sections 7.3.3.5,

7.4.3.5

AS/NZS ISO 8124.3: 2012

section 8.5

ISO 8124-3:2010/AMD1:2014

section 8.5

ICP-OES

Toys, jewelry and

other consumer

products (polymeric

material)





ASTM F963-11 sec. 4.3.5.2(2)(b)


Migratable lead and cadmium


Regulations

(SOR/2016-168)

ASTM F963-11 sec. 8.3.5.4

(polymeric material) and 8.3.4.2

EN 71-3:2013 sections 7.3.3.2,

7.4.3.2

AS/NZS ISO 8124.3: 2012

section 8.2

ISO 8124-3:2010/AMD1:2014

section 8.2

ICP-OES

Toys, jewelry and

other consumer

products (other

materials whether

mass colored or not)





ASTM F963-11 sec. 4.3.5.2(2)(b)


Part 3 of Annex II

ASTM F963-11 sec. 8.3.5.6

(other materials whether mass

colored or not)

EN 71-3:2013 sections 7.3.3.6,

7.4.3.6

AS/NZS ISO 8124.3: 2012

section 8.6

ISO 8124-3:2010/AMD1:2014

section 8.6

ICP-OES


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY

EQUIPMENT OR

TECHNOLOGY

Toys, jewelry and

other consumer

products (materials

that leave a trace

except samples

containing grease, oil,

wax or similar)





ASTM F963-11 sec. 4.3.5.2(2)(b)

ASTM F963-11 sec. 8.3.5.7

(materials that leave a trace)

except sect. 8.3.5.7(2)(b) only in

regard to samples containing

grease, oil, wax or similar and

except sect. 8.3.5.7(4)

AS/NZS ISO 8124.3 2012

section 8.7 (except 8.7.4)

ISO 8124-3:2010/AMD1:2014

section 8.7 (except 8.7.4)

ICP-OES

Toys, jewelry and

other consumer

products (paper and

paperboard)






EN 71-3:2013 sections 7.3.3.3,

7.4.3.3

AS/NZS ISO 8124.3:2012

section 8.3

ISO 8124-3:2010/AMD1:2014

section 8.3

ICP-OES

Toys, jewelry and

other consumer

products (textiles)






Part 3 of Annex II

EN 71-3:2013 sections 7.3.3.4,

7.4.3.4

AS/NZS ISO 8124.3:2012

section 8.4

ISO 8124-3:2010/AMD1:2014

section 8.4

ICP-OES

Surface Coatings in

Children’s Toys and

articles for learning

Leachable antimony, arsenic,

cadmium, selenium, barium

in support of:


(SOR/2011-17) sec. 23(b) with

amendment (SOR/2016-195)

Health Canada method C03

(2014-02-20) ICP-OES

Plastic substrates in

toys for children under

3 years of age

Total lead and total mercury

in support of:


(SOR/2011-17) sec. 27 (3)(c) in

reference to sec. 23 (a) and (c) with



CPSC-CH-E1002-08.3


§ 8.3.1.1(2)]

as modified by

ASTM F963-11 § 8.3.1.2


ICP-OES


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY

EQUIPMENT OR

TECHNOLOGY

Children’s child care

items and toys; other

plasticized materials

Phthalate Content (general

orthophthalates) in support of:

CPSIA § 108

(Canada) Phthalates Regulations

(SOR/2016-188)

Phthalate content per

Regulation (EC) No 1907/2006 on

REACH Annex XVII

Items 51 and 52

CPSC-CH-C1001-09.3 GC/MS

Toys, jewelry (small

metal parts)

Soluble cadmium

in support of:

ASTM F963-11 sec. 4.3.5.2(2)(c)

CPSC-CH-E1004-11

[cited in ASTM F963-11 sec.

8.3.5.5(3)]

ICP-OES

Food containers –

Ceramic ware

Leachable lead and cadmium in

support of:

i) US FDA Compliance Policy

Guides 545.400 and 545.450

ii) ASTM F963-11 sec. 4.3.3.2

iii) US California Proposition 65

iv) (Canada) Glazed Ceramics and

Glassware Regulations

(SOR/2016-175)

For i – iii)

ASTM C738-94

ASTM C927-80

for iv) Determination of

Leachable Lead and Cadmium

from Glazed Ceramics and

Glassware, Method C10 sections

5, 6.3 and 6.4 (2014-01-06)

ICP-OES


│ │ │

II. Mechanical

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY

Children’s products Small parts,

labelling

16 CFR 1501

16 CFR 1500.19

Small parts cylinder

observation

Pacifiers Various 16 CFR 1511

Timer, caliper, weights,

pacifier test fixture,

gauge

Children’s toys Material quality Material quality

ASTM F963-11 § 4.1 Observation

Children’s toys Flammability non-textiles

ASTM F963-11 section 4.2

Annex A-5 based on

16 CFR 1500.44

Stopwatch, flammability

test fixture

Children’s toys Flammability of textiles

ASTM F963-11 section 4.2

Annex A-6 based on

16 CFR 1610

Timer and other

applicable 1610

equipment

Children’s toys

Stuffing Materials

ASTM F963-11 Sect. 4.3.7 limited to

visual tests

ASTM F963-11 § 4.3.7 Visual

Children’s toys ASTM F963-11 Sect. 4.5

Sound Producing Toys ASTM F963-11 Sect. 8.19 Sound meter

Children’s toys

Small Objects

ASTM F963-11 Sect. 4.6 (except

sect. 4.6.2 Mouth-Actuated Toys)

16 CFR Part 1501

16 CFR 1500.19


observation

Children’s toys

Accessible Edges

ASTM F963-11 Sect. 4.7

Sharp Edges

16 CFR 1500.49

ASTM F963-11

Sect. 8.5-8.10 tests

16 CFR 1500.49(d)

8.5-8.10 equipment

(Use and Abuse

equipment; see end of

table) and

sharp edge tester

sharp edge tape

caliper

accessibility probes

Children’s toys Projections


ASTM F963-11

sect. 8.5-8.10 tests 8.5-8.10 equipment


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY

Children’s toys

Accessible Points


Sharp Points

16 CFR 1500.48

ASTM F963-11


Sharp Points

16 CFR 1500.48(d)

8.5-8.10 equipment and

Sharp point tester

accessibility probes

Children’s toys Wires or Rods

ASTM F963-11 Sect. 4.10

Flexure Test

ASTM F963-11 Sect. 8.12

Force gauges, flexure

tester, metronome

Children’s toys Nails and Fasteners

ASTM F963-11 Sect. 4.11

ASTM F963-11 Sect. 4.11

Small parts cylinder,

sharp point tester, sharp

edge tester

Children’s toys

Packaging Film

Plastic Film

ASTM F963-11 Sect. 4.12

Packaging Film Thickness

Plastic film thickness

ASTM F963-11 Sect. 8.21

Micrometer, caliper,

ruler

Children’s toys

Folding Mechanisms and Hinges

ASTM F963-11 Sect. 4.13

After ASTM F963-11


Test Methods for Locking

Mechanisms or Other Means

ASTM F963-11 Sect. 8.25

Accessibility rods

Children’s toys

Cords, Straps and Elastics in Toys

ASTM F963-11 Sect. 4.14

(except sect. 4.14.4 Strings and Lines

for Flying Devices)

Before and After: ASTM

F963-11 sect. 8.5-8.10 tests

Test for Loops and Cords

ASTM F963-11 Sect. 8.22

Push/pull gauge,

head probe, loop fixture

Children’s toys

Stability and Over-Load

Requirements

ASTM F963-11 Sect. 4.15

(except sect. 4.15.6 Wheeled Ride-

On Toys)

After ASTM F963-11


Test for Stability of Ride-On

Toys or Toy Seats

ASTM F963-11 sect. 8.15

and

Test for Overload of Ride-On

Toys and Toy Seats

ASTM F963-11 sect. 8.26

Incline, weights,

protractor

Children’s toys Tip Over Test for Large, Bulky Toys

ASTM F963-11Sect. 8.7.2 ASTM F963-11 Sect. 8.7.2 Impact medium

Children’s toys Tumble Test for Wheeled Toys

ASTM F963-11 Sect. 8.7.3

ASTM F963-11 Sect. 8.7.3 Steps


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY

Children’s toys Confined Spaces

ASTM F963-11 Sect. 4.16

ASTM F963-11

Sect. 8.5 8.10 tests

ASTM F963-11

Sect. 4.16

Tape Measure, Calipers

Children’s toys Wheels, Tires, and Axles

ASTM F963-11 Sect. 4.17

ASTM F963-11

sect. 8.5-8.10 tests

Tests for Tire Removal and

Snap-in Wheel and Axle

Assembly Removal

ASTM F963-11 sect. 8.11

Tension/Compression

Gauges

Children’s toys

Holes, Clearance, and Accessibility

of Mechanisms

ASTM F963-11 sect. 4.18

After ASTM F963-11


ASTM F963-11 sect. 4.18

Accessibility rods

Children’s Simulated

Protective Devices in

toys

ASTM F963-11 sect. 4.19

After ASTM F963-11


ASTM F963-11 sect. 8.7.4

Lens impact tester

Lenses

Use of impact-resistant lenses in

eyeglasses and sunglasses

21 CFR Part 801.410

Impact Test

21 CFR Part 801.410 (2)(d)

Lens impact tester

Children’s toys

Toy pacifier tests

ASTM F963-11 Sect. 4.20.2

Small Parts per

16 CFR Part 1501

Pacifiers per

16 CFR Part 1511

Comply with ASTM F963-11

4.6.1 (small objects)

16 CFR Part 1501

and

16 CFR Part 1511

Measuring device, small

objects cylinder

Children’s products

Teethers and Teething Toys ASTM

F963-11 Section 4.22

Dimensional Requirements for

Rattles per

16 CFR Part 1510


F963-11 sect. 8.5-8.10 tests

16 CFR Part 1510.4

dimensional requirements for

rattles

Rattle test fixtures, oval

and supplemental


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY

Children’s products,

rattles

Rattles per

16 CFR Part 1510

Rattles

ASTM F963-11

Sect. 4.23

including Rattles with nearly

Spherical, Hemispherical, or Circular

Flared Ends Sect. 4.23.1

16 CFR Part 1510.4


F963-11 sect. 8.5-8.10 tests


and supplemental

Children’s toys

Squeeze Toys

ASTM F963-11

Sect. 4.24

Dimensional Requirements for

Rattles per

16 CFR Part 1510


F963-11 sect. 8.5-8.10 tests

16 CFR Part 1510.4


and supplemental

Children’s toys

Battery-Operated Toys

ASTM 963-11

Sect. 4.25

(except sect. 4.25.10 Battery-

Powered Ride On Toys)

After ASTM F963-11

Sect. 8.5-8.12 tests as

appropriate

Stalled Motor Test for

Battery-Operated Toys

ASTM F963-11 sect. 8.17

Total range

thermometer,

thermocouple,

temperature probes,

stopwatch, timer

Children’s toys

Toys Intended to be Attached to a

Crib or Playpen

ASTM F963-11

Sect. 4.26

Before and After:

ASTM F963-11 sect. 8.5-

8.10 tests

Push/pull gauge,

head probe, loop fixture

Children’s toys

Stuffed and Beanbag-Type Toys

ASTM F963-11

Section 4.27

Tension Test for Seams in

Stuffed Toys and Beanbag-

Type Toys

ASTM F963-11 sect. 8.9.1

Seam clamps

Force gauge

Children’s toys

Stroller and Carriage Toys

ASTM F963-11

Sect. 4.28

Safety labeling

ASTM F963-11 sect. 5.7

Observation

Children’s toys

Toys and components of toys that are

Art Materials and contain hazardous

materials

ASTM F963-11

Sect. 4.29.2

Labelling to 16 CFR Part

1500.14(b)(8)

[ASTM D4236]

ASTM F963-11 sect. 5.13

Observation


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY

Children’s toys

Toy Gun Marking

ASTM F963-11

Sect. 4.30

After ASTM F963-11


F963-11 sec 4.30

Federal color card

Children’s toys,

balloons

Balloons

ASTM F963-11

Sect. 4.31

Labelling to 16 CFR Part

1500.19

ASTM F963-11 sect. 5.11.5

Observation

Children’s toys

Certain Toys with Nearly Spherical

Ends

ASTM F963-11 Sect. 4.32

ASTM F963-11 sect. 4.32 Supplemental test fixture

Children’s toys Marbles

ASTM F963-11 Sect. 4.33

Labelling to 16 CFR 1500.19

ASTM F963-11 sect. 5.11.4

Observation

Children’s toys Balls

ASTM F963-11 Sect. 4.34

16 CFR Part 1500.18(a)(17)

for under 3 year

Labelling to 16 CFR 1500.19

for 3-under 8 year

ASTM F963-11 sect. 5.11.3

Small ball test fixture

Children’s toys

Pompoms

ASTM F963-11 Sect. 4.35

Torque test

Tension test

ASTM F963-11

sect. 8.8, 8.8.1

ASTM F963-11 sect. 8.16

Small ball test fixture

Children’s toys Hemispheric-Shaped Objects

ASTM F963-11 Sect. 4.36

Before and After:

ASTM F963-11


Observation

Measurement

Children’s toys Magnets

ASTM F963-11 Sect. 4.38

After ASTM F963-11

sect. 8.8-8.9 tests

Magnet Test Methods

ASTM F963-11 sect. 8.24

Safety labeling

DC field gauss meter,

axial probe

Observation


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY

Children’s toys

Jaw Entrapment in Handles and

Steering Wheels

ASTM F963-11 Sect. 4.39

ASTM F963-11 sect. 4.39 Gauge blocks,

observation

Children’s Products Tracking labels CPSIA section 103 Observation

Children’s toys Age Grading Labeling


Labelling

ASTM F963-11 Sect. 5.2 Observation

Children’s toys Aquatic Toys


Labelling


Safety Labeling

Requirements


Ruler, observation

Children’s toys Crib/Playpen


Labelling


Safety Labeling

Requirements


Ruler, observation

Children’s toys Mobiles

Labelling


Safety Labeling

Requirements


Ruler, observation

Children’s toys Stroller and Carriage toys

Labelling


Safety Labeling

Requirements


Ruler, observation


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY

Children’s toys Adult Assembly


Labelling


Safety Labeling

Requirements


Ruler, observation

Children’s toys Simulated Protective Devices


Labelling


Safety Labeling

Requirements


Ruler, observation

Children’s toys Functional Sharp Edges or Points

ASTM F963-11 Sect. 5.10

Labelling

ASTM F963-11 Sect. 5.10

Safety Labeling

Requirements


Ruler, observation

Children’s toys

Small Objects, Small Balls, Marbles

and Balloons

ASTM F963-11 Sect. 5.11

16 CFR Part 1500.19 except (h)

Labeling Requirements

ASTM F963-11 Sect. 5.11

16 CFR Part 1500.19 (d) –(g)

Ruler, observation

Children’s toys Battery Operated Toys

ASTM F963-11 Sect. 5.15

Labelling

ASTM F963-11 Sect. 5.15

Safety Labeling

Requirements


Ruler, observation

Children’s toys Promotional Materials

ASTM F963-11 Sect. 5.16

Labelling


Children’s toys Magnets

ASTM F963-11 Sect. 5.17

Labelling

ASTM F963-11 Sect. 5.17

Safety Labeling

Requirements


Ruler, observation


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY

Children’s toys Instructional Literature


Instructional Literature


Children’s toys Crib/Playpen




Children’s toys Mobiles




Observation

Children’s toys Adult Assembly




Size Requirements


Ruler, observation

Children’s toys Battery Operated Toys




Children’s toys Toys in contact with food




Observation

Children’s toys Producers Markings


Producer’s Markings


Children’s toys Battery Operated Ride-on

ASTM F963-11 Sect 7.2

Producer’s Markings



and children’s toys

Normal Use Test

As applicable to above per

16 CFR 1500.50 to 53


Sharp point tester

Sharp edge tester



and children’s toys Abuse Tests Overview ASTM F963-11 sect. 8.6 Observation


and children’s toys Impact Test

16 CFR Part 1500.51,

1500.52, 1500.53


Specified impact area


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY


and children’s toys Bite Test

16 CFR Part 1500.51,

1500.52, 1500.53 Bite Fixture, force gauge


and children’s toys Torque Test

16 CFR Part 1500.51,

1500.52, 1500.53


Torque gauge


and children’s toys Tension Test

16 CFR Part 1500.51,

1500.52, 1500.53


Force gauges


and children’s toys Compression Test

16 CFR Part 1500.51,

1500.52, 1500.53

ASTM F963-11 sect. 8.10

Force gauge

Compression disc

Children’s toys Material Cleanliness

Clause 4.1

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clause 4.1

Observation

Children’s toys Assembly

Clause 4.2

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clause 4.2

Observation

Children’s toys

Flexible plastic sheeting EN 71-

1:2011+A3:2014

Clause 4.3

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clause 8.25.1

Dial Indicator

Children’s toys Toy bags

Clause 4.4

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clause 4.4

Ruler, Observation

Children’s toys

Glass

EN 71-1:2011+A3:2014

Clause 4.5

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.5 / 8.7 / 8.11 / 8.12

Impact test media,

impact test fixture,

Accessibility Probes,

Sharp point tester,

Sharp edge tester

Children’s toys

Expanding materials

EN 71-1:2011+A3:2014

Clause 4.6

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.2 / 8.3 / 8.4.2.1 /

8.5 / 8.7 / 8.8 / 8.14

Caliper


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY

Children’s toys

Edges

EN 71-1:2011+A3:2014

Clause 4.7

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clause 8.11


Sharp edge tester, PTFE

Tape

Children’s toys

points and metallic wire

EN 71-1:2011+A3:2014

Clause 4.8

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.12 / 8.13.2 / 8.13.3


Sharp point tester,

flexure test fixture

Children’s toys

Protruding Parts

EN 71-1:2011+A3:2014

Clause 4.9

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.4.2.3 / 8.11 / 8.12


Sharp point tester, Sharp

edge tester, Torque

gauge, Tension Gauge

Children’s toys

Parts moving against each other

EN 71-1:2011+A3:2014

Clause 4.10

EN 71-1:2011+A3:2014

Clause 8.18

Incline, weights,

protractor

Children’s toys

Mouth-actuated toys and other toys

intended to be put in the mouth

EN 71-1:2011+A3:2014

Clause 4.11 except (c) and (e)

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.2 / 8.3 / 8.4.2.1 /

8.9 / Except 8.17


Observation

Children’s toys Balloons

Clause 4.12

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clause 4.12

Observation

Children’s toys

Enclosures

EN 71-1:2011+A3:2014

Clause 4.14

EN 71-1:2011+A3:2014

Clauses 4.14 and 8.31 Measuring device

Children’s toys

Toys intended to bear the mass of a

child

EN 71-1:2011+A3:2014

Clause 4.15

except 4.15.1.3 regarding (8.22)

dynamic strength, 4.15.1.5(a) motor

brake performance – horizontal test,

4.15.1.5(b), 4.15.1.8, 4.15.2 and

4.15.5

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.11 / 8.12 / 8.21 /

8.23.1 / Except 8.22

50 kg, 25 kg load,

incline plane

Children’s toys

Heavy immobile toys

EN 71-1:2011+A3:2014

Clause 4.16

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clause 8.23.2

50 kg, 25 kg load,

incline plane


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY

Children’s toys

Aquatic toys and Inflatable toys

EN 71-1:2011+A3:2014

Clause 4.18

(No testing to requirements for

floating leisure articles for inflatable

aquatic ride-on toys with a maximum

dimension larger than 1.2 meters)

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.2 / 8.3 / 8.4.2.1

Torque gauge, Tension

Gauge, Small part

cylinder

Children’s toys

Percussion caps

EN 71-1:2011+A3:2014

Clause 4.19

EN 71-1:2011+A3:2014

Clauses 4.19 Observation

Children’s toys

Acoustics

EN 71-1:2011+A3:2014

Clause 4.20 except 4.20.2.5, 4.20.2.9,

4.20.2.11, 4.20.2.12

EN 71-1:2011+A3:2014

Clause 8.28 Sound meter

Children’s toys

Toys containing a non-electrical heat

source

EN 71-1:2011+A3:2014

Clause 4.21

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clause 8.30

Total range

thermometer,

thermocouple

Children’s toys

Small Balls

EN 71-1:2011+A3:2014

Clause 4.22

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.3 / 8.4.2.1 / 8.5 /

8.6 / 8.7 / 8.8 / 8.32.1 / 8.32.2

Template E

Children’s toys

Magnets

EN 71-1:2011+A3:2014

Clause 4.23

EN 71-1:2011+A3:2014

Clause 8.35


axial probe

Observation

Children’s toys

Toys attached to food

EN 71-1:2011+A3:2014

Clause 4.25

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.2 / 8.3 / 8.4.2.1 /

8.5 / 8.7 / 8.8 / 8.32.1

Small Part Cylinder,

Template E

Children’s toys

Toys Intended for Children Under 36

Months Clause 5

General Requirements

EN 71-1:2011+A3:2014

Clause 5.1

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.2 / 8.3 / 8.4.2.1 /

8.5 / 8.6 /8.7 / 8.8 / 8.9 / 8.11

/ 8.12

Torque gauge, Tension

Gauge, small parts

Children’s toys

Soft-filled toys and soft-filled parts

of a toy

EN 71-1:2011+A3:2014

Clause 5.2

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.2 / 8.4.2.2 / 8.10

Seam clamp, tension

gauge, accessibility

probe


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY

Children’s toys

Plastic sheeting

EN 71-1:2011+A3:2014

Clause 5.3

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.4.2.1 / 8.25.1 /

8.25.2

Micrometer, Feeler

Gauge, Tension Gauge

Children’s toys

Cords, chains and electrical cables in

Toys

EN 71-1:2011+A3:2014

Clause 5.4

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.36 / 8.38 / 8.39 /

8.40 / Except 8.20

Ruler, Observation

Children’s toys

Liquid-filled toys

EN 71-1:2011+A3:2014

Clause 5.5

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clause 8.15

1 mm diameter steel

needle

Children’s toys

Glass and porcelain

EN 71-1:2011+A3:2014

Clause 5.7

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clause 5.7

Observation

Children’s toys

Shape and size of certain toys

EN 71-1:2011+A3:2014

Clause 5.8

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clause 8.16

Template A and

template B

Children’s toys

Toys comprising monofilament fiber

EN 71-1:2011+A3:2014

Clause 5.9

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clause 5.9

Ruler, Observation

Children’s toys

Small balls

EN 71-1:2011+A3:2014

Clause 5.10

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.3 / 8.4.2.1 / 8.5 /

8.6 / 8.7 / 8.8 / 8.9 / 8.32.1 /

8.32.2

Template E

Children’s toys

Play Figures

EN 71-1:2011+A3:2014

Clause 5.11

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clause 8.33

Template B

Children’s toys

Hemispheric-shaped toys

EN 71-1:2011+A3:2014

Clause 5.12

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.3 / 8.4.2.1 / 8.5 /

8.6 / 8.7 / 8.8 / 8.98.3 /

8.4.2.1 / 8.5 / 8.6 / 8.7 / 8.8 /

8.9

Observation

Measurement

Children’s toys

Suction cups

EN 71-1:2011+A3:2014

Clause 5.13

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.3 / 8.4.2.1 / 8.5 /

8.6 / 8.7 / 8.8 / 8.32.1

Template E, observation


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY

Children’s toys

Straps Intended to be Worn Fully or

Partially Around the Neck

Clause 5.14

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.38

Force gauge

Children’s toys

Packaging

EN 71-1:2011+A3:2014

Clause 6

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.3 / 8.4.2.1 / 8.25.1 /

8.32.1

Observation, dial

indicator

Children’s toys

Warnings, markings and instructions

for use

EN 71-1:2011+A3:2014

Clause 7

EN 71-1:2011+A3:2014

BS EN 71-1:2011+A3:2014

Clauses 8.11 / 8.12 /

Clause 7 except 7.7 / 7.10.3

Observation

Children’s toys

Normal use

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.1

ISO 8124-1: 2014(E)

AS/NZS ISO 8124.1:2013

Clause 5.1 – 5.23 Except

5.11/5.13.2.2/5.14-5.17/5.20

Observation and

appropriate equipment

following; washing

machine, tumble dryer

Children’s toys

Reasonably foreseeable abuse

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.2

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 5.24 relevant tests

Abuse test equipment

Children’s toys

Materials

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.3

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 5.2 Small part test and

Clause 5.21

Observation,

measurement, small part

cylinder

Children’s toys

Small parts

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.4

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 5.24 abuse test,

Clause 5.2 small part test

Abuse test equipment,

small part cylinder

Children’s toys

Shape, size and strength of certain

toys

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.5

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clauses 5.3 / 5.4 / 5.5 / 5.6 /

5.24 / 5.24.6.3

Templates A & B

Children’s toys

Edges

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.6

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clauses 5.8 / 5.24.5 / 5.24.6.1

/ 5.24.7

Accessibility Probe,

Sharp edge Tester and

PTFE tape


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY

Children’s toys

Points

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.7

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 5.9

Accessibility Probe,

Sharp point Tester

Children’s toys

Projections

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.8

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 5.24

Abuse test equipment

Children’s toys

Metal wire and rods

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.9

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clauses 5.8 / 5.9 / 5.24.6.4 /

5.24.8

Flexure test fixture

Children’s toys

Plastic film or plastic bags in

packaging and in toys

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.10

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 5.10

Micrometer

Children’s toys

Cords and elastics

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.11 except 4.11.7

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clauses 4.11 relevant

sections, 5.11 except 5.11.3

Force gauge, weights

Children’s toys

Folding mechanisms

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.12

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 5.22

50-kg , 25-kg load

Children’s toys

Holes, clearances and accessibility of

mechanisms

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.13

ISO 8124-1:2014

AS/NZS ISO 8124.1:2013

Clauses 4.13, 5.7

5-mm, 12-mm diameter

rod

Children’s toys

Springs

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.14

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.14

Force gauge, length-

measuring device

Children’s toys

Stability and overload requirements

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.15 except the part of 4.15.2

regarding wheeled ride-on toys

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 5.12

Except 5.24.4 by virtue of

exception regarding wheeled

ride-on toys

25-kg 50-kg load, incline

plane


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY

Children’s toys

Enclosures

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.16

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 5.13

Except 5.13.2.2

Tension gauge, ruler

Children’s toys

Aquatic toys

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.19

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.19

Calipers

Children’s toys

Toys containing a heat source

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.23

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 5.18

Thermocouple

Children’s toys

Liquid-filled toys

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.24

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 5.19

Needle

Children’s toys

Mouth-actuated toys

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.25

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clauses 5.2 / 5.24.5 /

5.24.6.1/ Except 5.20

Torque wrench, force

gauge, small parts

cylinder

Children’s toys

Percussion caps

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.27

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.27

Observation

Children’s toys

Acoustic Requirements

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.28

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 5.25

Sound meter

Children’s toys

Magnets and magnetic components

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clause 4.30

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Clauses 5.31 – 5.34


axial probe

Observation

Children’s toys

Safety-labelling guidelines

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Annex B.2 except B.2.14 – B.2.17,

B.2.20

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Annex B.2 except B.2.14 –

B.2.17, B.2.20

Observation

Children’s toys

Instructional literature

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Annex B.3

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Annex B.3

Observation


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY

Children’s toys

Manufacturer’s markings

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Annex B.4

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Annex B.4

Observation

Children’s toys

Toy Gun Marking

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Annex D

ISO 8124-1:2014(E)

AS/NZS ISO 8124.1:2013

Annex D

Calipers

Children’s toys and



(SOR/2011-17) section 3, Written

Statements, with amendment

(SOR/2016-195)

SOR/2011-17 section 3,

Official Languages, with

amendment SOR/2016-195

Observation




SOR/2011-17 section 4 Packaging,

with amendment (SOR/2016-195)

Canada method M03 – Test

Method for Flexible Film

Bags

Micrometer

Template




SOR/2011-17 section 7 Small Parts


Canada method M00.1 –

Small Components

Small Parts Cylinder

Force Gauge

13mm flat bottom mass

35 mm flat bottom mass




SOR/2011-17 section 8

Metal Edges, with amendment

(SOR/2016-195)


Sharp Edges

Sharp Edge Tester

PTFE tape




SOR/2011-17 section 9 Wire Frames,



Sharp Points Sharp Point Tester




SOR/2011-17 section 10 Plastic

Edges, with amendment

(SOR/2016-195)


Sharp Edges


Reasonable Foreseeable Use

Observation

Sharp Edge Tester

PTFE tape




SOR/2011-17 section 11 Wood, with



Sharp Edges

M01.1 – Reasonable

Foreseeable Use

Observation

Sharp Edge Tester

PTFE tape




SOR/2011-17 section 12 Glass, with



Sharp Edges


Foreseeable Use

Observation

Sharp Edge Tester

PTFE tape


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY




SOR/2011-17 section 13 Fastener,



Sharp Edges


Sharp Points



Observation

Sharp Point Tester

Sharp Edge Tester




SOR/2011-17 section 14 Safety Stops

or locking devices - Folding

Mechanism, bracket and bracing,



Safety Stops or Locking

Devices, with amendment

SOR/2016-195

Observation




SOR/2011-17 section 15 Spring

wound driving mechanism, with




2mm Rod

10mm Rod





Projectile Components, with




Tension Gauge

Observation





Enclosures, with amendment

(SOR/2016-195)


Enclosures, with amendment

SOR/2016-195

Measuring Device

Observation





Stability, with amendment

(SOR/2016-195)

Stability Test

ASTM F963-11

Incline Platform

Protractor

Test weight

Wedge Blocks





Auditory Hazards, with amendment

(SOR/2016-195)

Canada Method M-04 Sound meter




SOR/2011-17 Dolls, Plush Toys and

Soft Toys: sections 28 Fastenings,

30 Small Parts, 31 Eyes and Noses,


Canada methods M01.1 &


Foreseeable Use

Reasonable Foreseeable

Use test equipment




SOR/2011-17 Dolls, Plush Toys and

Soft Toys: section 29 Stuffing

(Visual Only), with amendment

(SOR/2016-195)


(Visual assessment only),

with amendment

SOR/2016-195

Observation


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY




SOR/2011-17 sections 35, 36 Plant

Seeds, with amendment

(SOR/2016-195)


Plant Seeds – noise,

SOR/2011-17 section

36,Plant Seeds – stuffing

Material, with amendment

SOR/2016-195

Observation





Pull and Push Toys, with amendment

(SOR/2016-195)


Shaft Like Handles, with


Tension Gauge

Observation




SOR/2011-17 section 40 Rattles,


Canada method M05 –

Test Method for Rattles

Rattle Template

Reasonable Foreseeable

Use test equipment




SOR/2011-17 section 41 Elastic, with



Length or extensibility, with


Measuring Device

Textiles Standard Flammability of Clothing

Textiles 16 CFR 1610

45° Angle Flammability

Tester

Textiles Standard Test Method for

Flammability of Apparel Textiles ASTM D1230-10(2016)


Tester

Textiles (Canada) Textile Flammability

Regulations

CAN/CGSB-4.2

No. 27.5-2008


Tester

Textiles Flame Resistance of Textiles,

Vertical Test ASTM D6413/D6413M-15

Vertical Flammability

Tester

Textiles Rules and Regulations for Labeling

of Textile Products

16 CFR Part 300

16 CFR Part 301

16 CFR Part 303

Observation

Textiles Care Labeling of Textile Wearing

Apparel and Certain Piece Goods 16 CFR Part 423 Observation

Textiles in

Children’s Toys


SOR/2011-17 sections

32 flammability of outer covering,

33 flammability of yarn,

34 flammability of hair or mane, with


Toys Regulations

SOR/2011-17 Schedules 5-7,

with amendment

SOR/2016-195


Tester

Children’s Sleepwear

Standard for the Flammability of

Children’s Sleepwear: Sizes 0

through 6X (FF 3-71) and Sizes 7

through 14 (FF 5-74)

16 CFR Part 1615

16 CFR Part 1616


Tester


│ │ │

ITEMS,

MATERIALS OR

PRODUCTS

TESTED

SPECIFIC TESTS OR

PROPERTIES MEASURED

SPECIFICATION,

STANDARD METHOD

OR TECHNIQUE USED

*KEY EQUIPMENT

OR TECHNOLOGY

Carpets and Rugs

Standard for the Surface

Flammability of Carpets and Rugs

(FF 1-70) and Small Carpets and

Rugs (FF 2-70)

16 CFR Part 1630

16 CFR Part 1631

Flammability Test

Chamber

Tents Specification for Flame-Resistant

Materials used in Camping Tentage CPAI-84, 1995


Tester

Tents

(Canada) Hazardous Products (Tents)

Flammability Regulations

SOR/2016-185

Canada Method F-16 Vertical Flammability

Tester

Notes:

1. * = As Applicable

2. This scope is formatted as part of a single document including the Certificate of Accreditation No. AT – 1407.

Documents

ANSI-ASQ National Accreditation Boardaclass.jadianonline.com/eqm/client/docs/1ed384cb-6e8b-42dd-b995-a… · This laboratory is accredited in accordance with the recognized International