This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005.
This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory
quality management system (refer to joint ISO-ILAC-IAF Communiqué dated January 2009).
CERTIFICATE OF ACCREDITATION
ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044
This is to certify that
ANSECO Group, LLC 4455 Genesee Street
Buffalo NY 14225
has been assessed by ANAB
and meets the requirements of international standard
ISO/IEC 17025:2005
while demonstrating technical competence in the field of
TESTING
Refer to the accompanying Scope of Accreditation for information regarding the types of
tests to which this accreditation applies.
AT-1407
Certificate Number
Certificate Valid: 08/16/2016-09/17/2017 Version No. 002 Issued: 08/16/2016
Version 002 Issued: 08/16/2016 Page 1 of 26
│ │ │
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
ANSECO Group, LLC 4455 Genesee Street, Buffalo, NY 14225
Daniel Sabou Phone: 716-635-1180, ext. 315
[email protected] www.ansecogroup.com
TESTING
Valid to: September 17, 2017 Certificate Number: AT – 1407
I. Chemical
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s products’
surface coatings
Total lead in support of:
16 CFR 1303
(Canada) Toys Regulations
(SOR/2011-17) sec. 23(a)
(Canada) Surface Coating Materials
Regulations (SOR/2016-193)
CPSC-CH-E1003-09.1
(HotBlock or microwave
digestion)
ICP-OES
Version 002 Issued: 08/16/2016 Page 2 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY
EQUIPMENT OR
TECHNOLOGY
Children’s products’
surface coatings
Total, antimony, arsenic, barium,
cadmium, chromium, lead, mercury,
selenium, in support of:
16 CFR 1303
(Canada) Toys Regulations
(SOR/2011-17) sec. 23(a), 23(b)
and 23(c) with amendment
SOR/2016-195)
(Canada) Surface Coating Materials
Regulations (SOR/2016-193)
F963-11 § 4.3.5.1(1) total screen for
Sb, As, Ba, Cd, Pb, Cr, Hg, Se
Regulation (EC) No 1907/2006
(REACH)
CPSC-CH-E1003-09.1
[cited in ASTM F963-11
§ 8.3.1.1(3)]
as modified by
ASTM F963-11 § 8.3.1.2
(HotBlock or microwave
digestion)
ICP-OES
Children’s metal
products including
metal jewelry
and other consumer
products of metal
Total lead in support of:
CPSIA § 101
(Canada) Consumer Products
Containing Lead (Contact with
Mouth) Regulations
(SOR/2016-171)
(Canada) Children’s Jewelry
Regulations
(SOR/2016-168)
CPSC-CH-E1001-08.1 or
CPSC-CH-E1001-08.3
(HotBlock or microwave
digestion)
ICP-OES
Version 002 Issued: 08/16/2016 Page 3 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY
EQUIPMENT OR
TECHNOLOGY
Children’s metal
products including
metal jewelry
and other consumer
products of metal
Total lead, cadmium in support of:
CPSIA § 101
ASTM F963-11 sec. 4.3.5.2(2)(a)
total screen for Cd, Pb
(Canada) Consumer Products
Containing Lead (Contact with
Mouth) Regulations
(SOR/2016-171)
(Canada) Children’s Jewelry
Regulations
(SOR/2016-168)
Regulation (EC) No 1907/2006
(REACH)
CPSC-CH-E1001-08.1 or
CPSC-CH-E1001-08.3
[cited in ASTM F963-11
§ 8.3.1.1(1)]
as modified by
ASTM F963-11 § 8.3.1.2
(HotBlock or microwave
digestion)
ICP-OES
Children’s non-metal
products (plastics,
polymers and non-
siliceous materials)
and other consumer
products of non-metal
Total lead in support of:
CPSIA § 101
(Canada) Consumer Products
Containing Lead (Contact with
Mouth) Regulations
(SOR/2016-171)
(Canada) Children’s Jewelry
Regulations (SOR/2016-168)
CPSC-CH-E1002-08.1 or
CPSC-CH-E1002-08.3
(microwave digestion)
ICP-OES
Version 002 Issued: 08/16/2016 Page 4 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY
EQUIPMENT OR
TECHNOLOGY
Children’s non-metal
products (plastics,
polymers and non-
siliceous materials)
and other consumer
products of non-metal
Total antimony, arsenic, barium,
cadmium, chromium, lead, mercury,
selenium, in support of:
CPSIA § 101
ASTM F963-11 sec. 4.3.5.2(2)(a)
total screen for
Sb, As, Ba, Cd, Pb, Cr, Hg, Se
(Canada) Consumer Products
Containing Lead (Contact with
Mouth) Regulations
(SOR/2016-171)
(Canada) Children’s Jewelry
Regulations
(SOR/2016-168)
Regulation (EC) No 1907/2006
(REACH)
CPSC-CH-E1002-08.1 or
CPSC-CH-E1002-08.3
[cited in ASTM F963-11
§ 8.3.1.1(2)]
as modified by
ASTM F963-11 § 8.3.1.2
(microwave digestion)
ICP-OES
Children’s products’
surface coatings
Soluble / Migration of certain
elements (Al, Sb, As, Ba, B, Cd,
Cr, Co, Cu, Pb, Mn, Hg, Ni, Se, Sr,
Sn, Zn) in support of:
Soluble Test for Metals
ASTM F963-11 section 4.3.5.1(2)
European Directive 2009/48/EC
Part 3 of Annex II
ASTM F963-11 section 8.3.4
EN 71-3:2013 sections 7.3.3.1,
7.4.3.1
AS/NZS ISO 8124.3:2012
section 8.1
ISO 8124-3:2010/AMD1:2014
section 8.1
ICP-OES
Version 002 Issued: 08/16/2016 Page 5 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY
EQUIPMENT OR
TECHNOLOGY
Toys, jewelry and
other consumer
products (glass,
ceramic, metal)
Soluble / Migration of certain
elements (Al, Sb, As, Ba, B, Cd,
Cr, Co, Cu, Pb, Mn, Hg, Ni, Se, Sr,
Sn, Zn) in support of:
ASTM F963-11 sec. 4.3.5.2(2)(b)
European Directive 2009/48/EC Part 3 of Annex II
Migratable lead and cadmium
(Canada) Children’s Jewelry
Regulations
(SOR/2016-168)
ASTM F963-11 sec. 8.3.5.5 and
8.3.5.5(2)
(glass, ceramic, metal)
EN 71-3:2013 sections 7.3.3.5,
7.4.3.5
AS/NZS ISO 8124.3: 2012
section 8.5
ISO 8124-3:2010/AMD1:2014
section 8.5
ICP-OES
Toys, jewelry and
other consumer
products (polymeric
material)
Soluble / Migration of certain
elements (Al, Sb, As, Ba, B, Cd,
Cr, Co, Cu, Pb, Mn, Hg, Ni, Se, Sr,
Sn, Zn) in support of:
ASTM F963-11 sec. 4.3.5.2(2)(b)
European Directive 2009/48/EC Part 3 of Annex II
Migratable lead and cadmium
(Canada) Children’s Jewelry
Regulations
(SOR/2016-168)
ASTM F963-11 sec. 8.3.5.4
(polymeric material) and 8.3.4.2
EN 71-3:2013 sections 7.3.3.2,
7.4.3.2
AS/NZS ISO 8124.3: 2012
section 8.2
ISO 8124-3:2010/AMD1:2014
section 8.2
ICP-OES
Toys, jewelry and
other consumer
products (other
materials whether
mass colored or not)
Soluble / Migration of certain
elements (Al, Sb, As, Ba, B, Cd,
Cr, Co, Cu, Pb, Mn, Hg, Ni, Se, Sr,
Sn, Zn) in support of:
ASTM F963-11 sec. 4.3.5.2(2)(b)
European Directive 2009/48/EC
Part 3 of Annex II
ASTM F963-11 sec. 8.3.5.6
(other materials whether mass
colored or not)
EN 71-3:2013 sections 7.3.3.6,
7.4.3.6
AS/NZS ISO 8124.3: 2012
section 8.6
ISO 8124-3:2010/AMD1:2014
section 8.6
ICP-OES
Version 002 Issued: 08/16/2016 Page 6 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY
EQUIPMENT OR
TECHNOLOGY
Toys, jewelry and
other consumer
products (materials
that leave a trace
except samples
containing grease, oil,
wax or similar)
Soluble / Migration of certain
elements (Al, Sb, As, Ba, B, Cd,
Cr, Co, Cu, Pb, Mn, Hg, Ni, Se, Sr,
Sn, Zn) in support of:
ASTM F963-11 sec. 4.3.5.2(2)(b)
ASTM F963-11 sec. 8.3.5.7
(materials that leave a trace)
except sect. 8.3.5.7(2)(b) only in
regard to samples containing
grease, oil, wax or similar and
except sect. 8.3.5.7(4)
AS/NZS ISO 8124.3 2012
section 8.7 (except 8.7.4)
ISO 8124-3:2010/AMD1:2014
section 8.7 (except 8.7.4)
ICP-OES
Toys, jewelry and
other consumer
products (paper and
paperboard)
Soluble / Migration of certain
elements (Al, Sb, As, Ba, B, Cd,
Cr, Co, Cu, Pb, Mn, Hg, Ni, Se, Sr,
Sn, Zn) in support of:
European Directive 2009/48/EC Part 3 of Annex II
EN 71-3:2013 sections 7.3.3.3,
7.4.3.3
AS/NZS ISO 8124.3:2012
section 8.3
ISO 8124-3:2010/AMD1:2014
section 8.3
ICP-OES
Toys, jewelry and
other consumer
products (textiles)
Soluble / Migration of certain
elements (Al, Sb, As, Ba, B, Cd,
Cr, Co, Cu, Pb, Mn, Hg, Ni, Se, Sr,
Sn, Zn) in support of:
European Directive 2009/48/EC
Part 3 of Annex II
EN 71-3:2013 sections 7.3.3.4,
7.4.3.4
AS/NZS ISO 8124.3:2012
section 8.4
ISO 8124-3:2010/AMD1:2014
section 8.4
ICP-OES
Surface Coatings in
Children’s Toys and
articles for learning
Leachable antimony, arsenic,
cadmium, selenium, barium
in support of:
(Canada) Toys Regulations
(SOR/2011-17) sec. 23(b) with
amendment (SOR/2016-195)
Health Canada method C03
(2014-02-20) ICP-OES
Plastic substrates in
toys for children under
3 years of age
Total lead and total mercury
in support of:
(Canada) Toys Regulations
(SOR/2011-17) sec. 27 (3)(c) in
reference to sec. 23 (a) and (c) with
amendment (SOR/2016-195)
CPSC-CH-E1002-08.1 or
CPSC-CH-E1002-08.3
[cited in ASTM F963-11
§ 8.3.1.1(2)]
as modified by
ASTM F963-11 § 8.3.1.2
(microwave digestion)
ICP-OES
Version 002 Issued: 08/16/2016 Page 7 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY
EQUIPMENT OR
TECHNOLOGY
Children’s child care
items and toys; other
plasticized materials
Phthalate Content (general
orthophthalates) in support of:
CPSIA § 108
(Canada) Phthalates Regulations
(SOR/2016-188)
Phthalate content per
Regulation (EC) No 1907/2006 on
REACH Annex XVII
Items 51 and 52
CPSC-CH-C1001-09.3 GC/MS
Toys, jewelry (small
metal parts)
Soluble cadmium
in support of:
ASTM F963-11 sec. 4.3.5.2(2)(c)
CPSC-CH-E1004-11
[cited in ASTM F963-11 sec.
8.3.5.5(3)]
ICP-OES
Food containers –
Ceramic ware
Leachable lead and cadmium in
support of:
i) US FDA Compliance Policy
Guides 545.400 and 545.450
ii) ASTM F963-11 sec. 4.3.3.2
iii) US California Proposition 65
iv) (Canada) Glazed Ceramics and
Glassware Regulations
(SOR/2016-175)
For i – iii)
ASTM C738-94
ASTM C927-80
for iv) Determination of
Leachable Lead and Cadmium
from Glazed Ceramics and
Glassware, Method C10 sections
5, 6.3 and 6.4 (2014-01-06)
ICP-OES
Version 002 Issued: 08/16/2016 Page 8 of 26
│ │ │
II. Mechanical
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s products Small parts,
labelling
16 CFR 1501
16 CFR 1500.19
Small parts cylinder
observation
Pacifiers Various 16 CFR 1511
Timer, caliper, weights,
pacifier test fixture,
gauge
Children’s toys Material quality Material quality
ASTM F963-11 § 4.1 Observation
Children’s toys Flammability non-textiles
ASTM F963-11 section 4.2
Annex A-5 based on
16 CFR 1500.44
Stopwatch, flammability
test fixture
Children’s toys Flammability of textiles
ASTM F963-11 section 4.2
Annex A-6 based on
16 CFR 1610
Timer and other
applicable 1610
equipment
Children’s toys
Stuffing Materials
ASTM F963-11 Sect. 4.3.7 limited to
visual tests
ASTM F963-11 § 4.3.7 Visual
Children’s toys ASTM F963-11 Sect. 4.5
Sound Producing Toys ASTM F963-11 Sect. 8.19 Sound meter
Children’s toys
Small Objects
ASTM F963-11 Sect. 4.6 (except
sect. 4.6.2 Mouth-Actuated Toys)
16 CFR Part 1501
16 CFR 1500.19
Small parts cylinder
observation
Children’s toys
Accessible Edges
ASTM F963-11 Sect. 4.7
Sharp Edges
16 CFR 1500.49
ASTM F963-11
Sect. 8.5-8.10 tests
16 CFR 1500.49(d)
8.5-8.10 equipment
(Use and Abuse
equipment; see end of
table) and
sharp edge tester
sharp edge tape
caliper
accessibility probes
Children’s toys Projections
ASTM F963-11 Sect. 4.8
ASTM F963-11
sect. 8.5-8.10 tests 8.5-8.10 equipment
Version 002 Issued: 08/16/2016 Page 9 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s toys
Accessible Points
ASTM F963-11 Sect. 4.9
Sharp Points
16 CFR 1500.48
ASTM F963-11
Sect. 8.5-8.10 tests
Sharp Points
16 CFR 1500.48(d)
8.5-8.10 equipment and
Sharp point tester
accessibility probes
Children’s toys Wires or Rods
ASTM F963-11 Sect. 4.10
Flexure Test
ASTM F963-11 Sect. 8.12
Force gauges, flexure
tester, metronome
Children’s toys Nails and Fasteners
ASTM F963-11 Sect. 4.11
ASTM F963-11 Sect. 4.11
Small parts cylinder,
sharp point tester, sharp
edge tester
Children’s toys
Packaging Film
Plastic Film
ASTM F963-11 Sect. 4.12
Packaging Film Thickness
Plastic film thickness
ASTM F963-11 Sect. 8.21
Micrometer, caliper,
ruler
Children’s toys
Folding Mechanisms and Hinges
ASTM F963-11 Sect. 4.13
After ASTM F963-11
Sect. 8.5-8.10 tests
Test Methods for Locking
Mechanisms or Other Means
ASTM F963-11 Sect. 8.25
Accessibility rods
Children’s toys
Cords, Straps and Elastics in Toys
ASTM F963-11 Sect. 4.14
(except sect. 4.14.4 Strings and Lines
for Flying Devices)
Before and After: ASTM
F963-11 sect. 8.5-8.10 tests
Test for Loops and Cords
ASTM F963-11 Sect. 8.22
Push/pull gauge,
head probe, loop fixture
Children’s toys
Stability and Over-Load
Requirements
ASTM F963-11 Sect. 4.15
(except sect. 4.15.6 Wheeled Ride-
On Toys)
After ASTM F963-11
Sect. 8.5-8.10 tests
Test for Stability of Ride-On
Toys or Toy Seats
ASTM F963-11 sect. 8.15
and
Test for Overload of Ride-On
Toys and Toy Seats
ASTM F963-11 sect. 8.26
Incline, weights,
protractor
Children’s toys Tip Over Test for Large, Bulky Toys
ASTM F963-11Sect. 8.7.2 ASTM F963-11 Sect. 8.7.2 Impact medium
Children’s toys Tumble Test for Wheeled Toys
ASTM F963-11 Sect. 8.7.3
ASTM F963-11 Sect. 8.7.3 Steps
Version 002 Issued: 08/16/2016 Page 10 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s toys Confined Spaces
ASTM F963-11 Sect. 4.16
ASTM F963-11
Sect. 8.5 8.10 tests
ASTM F963-11
Sect. 4.16
Tape Measure, Calipers
Children’s toys Wheels, Tires, and Axles
ASTM F963-11 Sect. 4.17
ASTM F963-11
sect. 8.5-8.10 tests
Tests for Tire Removal and
Snap-in Wheel and Axle
Assembly Removal
ASTM F963-11 sect. 8.11
Tension/Compression
Gauges
Children’s toys
Holes, Clearance, and Accessibility
of Mechanisms
ASTM F963-11 sect. 4.18
After ASTM F963-11
Sect. 8.5-8.10 tests
ASTM F963-11 sect. 4.18
Accessibility rods
Children’s Simulated
Protective Devices in
toys
ASTM F963-11 sect. 4.19
After ASTM F963-11
Sect. 8.8-8.10 tests
ASTM F963-11 sect. 8.7.4
Lens impact tester
Lenses
Use of impact-resistant lenses in
eyeglasses and sunglasses
21 CFR Part 801.410
Impact Test
21 CFR Part 801.410 (2)(d)
Lens impact tester
Children’s toys
Toy pacifier tests
ASTM F963-11 Sect. 4.20.2
Small Parts per
16 CFR Part 1501
Pacifiers per
16 CFR Part 1511
Comply with ASTM F963-11
4.6.1 (small objects)
16 CFR Part 1501
and
16 CFR Part 1511
Measuring device, small
objects cylinder
Children’s products
Teethers and Teething Toys ASTM
F963-11 Section 4.22
Dimensional Requirements for
Rattles per
16 CFR Part 1510
Before and After: ASTM
F963-11 sect. 8.5-8.10 tests
16 CFR Part 1510.4
dimensional requirements for
rattles
Rattle test fixtures, oval
and supplemental
Version 002 Issued: 08/16/2016 Page 11 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s products,
rattles
Rattles per
16 CFR Part 1510
Rattles
ASTM F963-11
Sect. 4.23
including Rattles with nearly
Spherical, Hemispherical, or Circular
Flared Ends Sect. 4.23.1
16 CFR Part 1510.4
Before and After: ASTM
F963-11 sect. 8.5-8.10 tests
Rattle test fixtures, oval
and supplemental
Children’s toys
Squeeze Toys
ASTM F963-11
Sect. 4.24
Dimensional Requirements for
Rattles per
16 CFR Part 1510
Before and After: ASTM
F963-11 sect. 8.5-8.10 tests
16 CFR Part 1510.4
Rattle test fixtures, oval
and supplemental
Children’s toys
Battery-Operated Toys
ASTM 963-11
Sect. 4.25
(except sect. 4.25.10 Battery-
Powered Ride On Toys)
After ASTM F963-11
Sect. 8.5-8.12 tests as
appropriate
Stalled Motor Test for
Battery-Operated Toys
ASTM F963-11 sect. 8.17
Total range
thermometer,
thermocouple,
temperature probes,
stopwatch, timer
Children’s toys
Toys Intended to be Attached to a
Crib or Playpen
ASTM F963-11
Sect. 4.26
Before and After:
ASTM F963-11 sect. 8.5-
8.10 tests
Push/pull gauge,
head probe, loop fixture
Children’s toys
Stuffed and Beanbag-Type Toys
ASTM F963-11
Section 4.27
Tension Test for Seams in
Stuffed Toys and Beanbag-
Type Toys
ASTM F963-11 sect. 8.9.1
Seam clamps
Force gauge
Children’s toys
Stroller and Carriage Toys
ASTM F963-11
Sect. 4.28
Safety labeling
ASTM F963-11 sect. 5.7
Observation
Children’s toys
Toys and components of toys that are
Art Materials and contain hazardous
materials
ASTM F963-11
Sect. 4.29.2
Labelling to 16 CFR Part
1500.14(b)(8)
[ASTM D4236]
ASTM F963-11 sect. 5.13
Observation
Version 002 Issued: 08/16/2016 Page 12 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s toys
Toy Gun Marking
ASTM F963-11
Sect. 4.30
After ASTM F963-11
sect. 8.5-8.10 tests
F963-11 sec 4.30
Federal color card
Children’s toys,
balloons
Balloons
ASTM F963-11
Sect. 4.31
Labelling to 16 CFR Part
1500.19
ASTM F963-11 sect. 5.11.5
Observation
Children’s toys
Certain Toys with Nearly Spherical
Ends
ASTM F963-11 Sect. 4.32
ASTM F963-11 sect. 4.32 Supplemental test fixture
Children’s toys Marbles
ASTM F963-11 Sect. 4.33
Labelling to 16 CFR 1500.19
ASTM F963-11 sect. 5.11.4
Observation
Children’s toys Balls
ASTM F963-11 Sect. 4.34
16 CFR Part 1500.18(a)(17)
for under 3 year
Labelling to 16 CFR 1500.19
for 3-under 8 year
ASTM F963-11 sect. 5.11.3
Small ball test fixture
Children’s toys
Pompoms
ASTM F963-11 Sect. 4.35
Torque test
Tension test
ASTM F963-11
sect. 8.8, 8.8.1
ASTM F963-11 sect. 8.16
Small ball test fixture
Children’s toys Hemispheric-Shaped Objects
ASTM F963-11 Sect. 4.36
Before and After:
ASTM F963-11
sect. 8.6-8.10 tests
Observation
Measurement
Children’s toys Magnets
ASTM F963-11 Sect. 4.38
After ASTM F963-11
sect. 8.8-8.9 tests
Magnet Test Methods
ASTM F963-11 sect. 8.24
Safety labeling
DC field gauss meter,
axial probe
Observation
Version 002 Issued: 08/16/2016 Page 13 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s toys
Jaw Entrapment in Handles and
Steering Wheels
ASTM F963-11 Sect. 4.39
ASTM F963-11 sect. 4.39 Gauge blocks,
observation
Children’s Products Tracking labels CPSIA section 103 Observation
Children’s toys Age Grading Labeling
ASTM F963-11 Sect. 5.2
Labelling
ASTM F963-11 Sect. 5.2 Observation
Children’s toys Aquatic Toys
ASTM F963-11 Sect. 5.4
Labelling
ASTM F963-11 Sect. 5.4
Safety Labeling
Requirements
ASTM F963-11 Sect. 5.3
Ruler, observation
Children’s toys Crib/Playpen
ASTM F963-11 Sect. 5.5
Labelling
ASTM F963-11 Sect. 5.5
Safety Labeling
Requirements
ASTM F963-11 Sect. 5.3
Ruler, observation
Children’s toys Mobiles
Labelling
ASTM F963-11 Sect. 5.6
Safety Labeling
Requirements
ASTM F963-11 Sect. 5.3
Ruler, observation
Children’s toys Stroller and Carriage toys
Labelling
ASTM F963-11 Sect. 5.7
Safety Labeling
Requirements
ASTM F963-11 Sect. 5.3
Ruler, observation
Version 002 Issued: 08/16/2016 Page 14 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s toys Adult Assembly
ASTM F963-11 Sect. 5.8
Labelling
ASTM F963-11 Sect. 5.8
Safety Labeling
Requirements
ASTM F963-11 Sect. 5.3
Ruler, observation
Children’s toys Simulated Protective Devices
ASTM F963-11 Sect. 5.9
Labelling
ASTM F963-11 Sect. 5.9
Safety Labeling
Requirements
ASTM F963-11 Sect. 5.3
Ruler, observation
Children’s toys Functional Sharp Edges or Points
ASTM F963-11 Sect. 5.10
Labelling
ASTM F963-11 Sect. 5.10
Safety Labeling
Requirements
ASTM F963-11 Sect. 5.3
Ruler, observation
Children’s toys
Small Objects, Small Balls, Marbles
and Balloons
ASTM F963-11 Sect. 5.11
16 CFR Part 1500.19 except (h)
Labeling Requirements
ASTM F963-11 Sect. 5.11
16 CFR Part 1500.19 (d) –(g)
Ruler, observation
Children’s toys Battery Operated Toys
ASTM F963-11 Sect. 5.15
Labelling
ASTM F963-11 Sect. 5.15
Safety Labeling
Requirements
ASTM F963-11 Sect. 5.3
Ruler, observation
Children’s toys Promotional Materials
ASTM F963-11 Sect. 5.16
Labelling
ASTM F963-11 Sect. 5.16 Observation
Children’s toys Magnets
ASTM F963-11 Sect. 5.17
Labelling
ASTM F963-11 Sect. 5.17
Safety Labeling
Requirements
ASTM F963-11 Sect. 5.3
Ruler, observation
Version 002 Issued: 08/16/2016 Page 15 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s toys Instructional Literature
ASTM F963-11 Sect. 6.1
Instructional Literature
ASTM F963-11 Sect. 6.1 Observation
Children’s toys Crib/Playpen
ASTM F963-11 Sect. 6.2
Instructional Literature
ASTM F963-11 Sect. 6.2 Observation
Children’s toys Mobiles
ASTM F963-11 Sect. 6.3
Instructional Literature
ASTM F963-11 Sect. 6.3
Observation
Children’s toys Adult Assembly
ASTM F963-11 Sect. 6.4
Instructional Literature
ASTM F963-11 Sect. 6.4
Size Requirements
ASTM F963-11 Sect. 5.3
Ruler, observation
Children’s toys Battery Operated Toys
ASTM F963-11 Sect. 6.5
Instructional Literature
ASTM F963-11 Sect. 6.5 Observation
Children’s toys Toys in contact with food
ASTM F963-11 Sect. 6.6
Instructional Literature
ASTM F963-11 Sect. 6.6
Observation
Children’s toys Producers Markings
ASTM F963-11 Sect. 7.1
Producer’s Markings
ASTM F963-11 Sect. 7.1 Observation
Children’s toys Battery Operated Ride-on
ASTM F963-11 Sect 7.2
Producer’s Markings
ASTM F963-11 Sect. 7.2 Observation
Children’s products
and children’s toys
Normal Use Test
As applicable to above per
16 CFR 1500.50 to 53
ASTM F963-11 sect. 8.5
Sharp point tester
Sharp edge tester
Small parts cylinder
Children’s products
and children’s toys Abuse Tests Overview ASTM F963-11 sect. 8.6 Observation
Children’s products
and children’s toys Impact Test
16 CFR Part 1500.51,
1500.52, 1500.53
ASTM F963-11 sect. 8.7
Specified impact area
Version 002 Issued: 08/16/2016 Page 16 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s products
and children’s toys Bite Test
16 CFR Part 1500.51,
1500.52, 1500.53 Bite Fixture, force gauge
Children’s products
and children’s toys Torque Test
16 CFR Part 1500.51,
1500.52, 1500.53
ASTM F963-11 sect. 8.8
Torque gauge
Children’s products
and children’s toys Tension Test
16 CFR Part 1500.51,
1500.52, 1500.53
ASTM F963-11 sect. 8.9
Force gauges
Children’s products
and children’s toys Compression Test
16 CFR Part 1500.51,
1500.52, 1500.53
ASTM F963-11 sect. 8.10
Force gauge
Compression disc
Children’s toys Material Cleanliness
Clause 4.1
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clause 4.1
Observation
Children’s toys Assembly
Clause 4.2
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clause 4.2
Observation
Children’s toys
Flexible plastic sheeting EN 71-
1:2011+A3:2014
Clause 4.3
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clause 8.25.1
Dial Indicator
Children’s toys Toy bags
Clause 4.4
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clause 4.4
Ruler, Observation
Children’s toys
Glass
EN 71-1:2011+A3:2014
Clause 4.5
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.5 / 8.7 / 8.11 / 8.12
Impact test media,
impact test fixture,
Accessibility Probes,
Sharp point tester,
Sharp edge tester
Children’s toys
Expanding materials
EN 71-1:2011+A3:2014
Clause 4.6
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.2 / 8.3 / 8.4.2.1 /
8.5 / 8.7 / 8.8 / 8.14
Caliper
Version 002 Issued: 08/16/2016 Page 17 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s toys
Edges
EN 71-1:2011+A3:2014
Clause 4.7
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clause 8.11
Accessibility Probes,
Sharp edge tester, PTFE
Tape
Children’s toys
points and metallic wire
EN 71-1:2011+A3:2014
Clause 4.8
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.12 / 8.13.2 / 8.13.3
Accessibility Probes,
Sharp point tester,
flexure test fixture
Children’s toys
Protruding Parts
EN 71-1:2011+A3:2014
Clause 4.9
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.4.2.3 / 8.11 / 8.12
Accessibility Probes,
Sharp point tester, Sharp
edge tester, Torque
gauge, Tension Gauge
Children’s toys
Parts moving against each other
EN 71-1:2011+A3:2014
Clause 4.10
EN 71-1:2011+A3:2014
Clause 8.18
Incline, weights,
protractor
Children’s toys
Mouth-actuated toys and other toys
intended to be put in the mouth
EN 71-1:2011+A3:2014
Clause 4.11 except (c) and (e)
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.2 / 8.3 / 8.4.2.1 /
8.9 / Except 8.17
Small parts cylinder
Observation
Children’s toys Balloons
Clause 4.12
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clause 4.12
Observation
Children’s toys
Enclosures
EN 71-1:2011+A3:2014
Clause 4.14
EN 71-1:2011+A3:2014
Clauses 4.14 and 8.31 Measuring device
Children’s toys
Toys intended to bear the mass of a
child
EN 71-1:2011+A3:2014
Clause 4.15
except 4.15.1.3 regarding (8.22)
dynamic strength, 4.15.1.5(a) motor
brake performance – horizontal test,
4.15.1.5(b), 4.15.1.8, 4.15.2 and
4.15.5
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.11 / 8.12 / 8.21 /
8.23.1 / Except 8.22
50 kg, 25 kg load,
incline plane
Children’s toys
Heavy immobile toys
EN 71-1:2011+A3:2014
Clause 4.16
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clause 8.23.2
50 kg, 25 kg load,
incline plane
Version 002 Issued: 08/16/2016 Page 18 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s toys
Aquatic toys and Inflatable toys
EN 71-1:2011+A3:2014
Clause 4.18
(No testing to requirements for
floating leisure articles for inflatable
aquatic ride-on toys with a maximum
dimension larger than 1.2 meters)
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.2 / 8.3 / 8.4.2.1
Torque gauge, Tension
Gauge, Small part
cylinder
Children’s toys
Percussion caps
EN 71-1:2011+A3:2014
Clause 4.19
EN 71-1:2011+A3:2014
Clauses 4.19 Observation
Children’s toys
Acoustics
EN 71-1:2011+A3:2014
Clause 4.20 except 4.20.2.5, 4.20.2.9,
4.20.2.11, 4.20.2.12
EN 71-1:2011+A3:2014
Clause 8.28 Sound meter
Children’s toys
Toys containing a non-electrical heat
source
EN 71-1:2011+A3:2014
Clause 4.21
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clause 8.30
Total range
thermometer,
thermocouple
Children’s toys
Small Balls
EN 71-1:2011+A3:2014
Clause 4.22
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.3 / 8.4.2.1 / 8.5 /
8.6 / 8.7 / 8.8 / 8.32.1 / 8.32.2
Template E
Children’s toys
Magnets
EN 71-1:2011+A3:2014
Clause 4.23
EN 71-1:2011+A3:2014
Clause 8.35
DC field gauss meter,
axial probe
Observation
Children’s toys
Toys attached to food
EN 71-1:2011+A3:2014
Clause 4.25
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.2 / 8.3 / 8.4.2.1 /
8.5 / 8.7 / 8.8 / 8.32.1
Small Part Cylinder,
Template E
Children’s toys
Toys Intended for Children Under 36
Months Clause 5
General Requirements
EN 71-1:2011+A3:2014
Clause 5.1
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.2 / 8.3 / 8.4.2.1 /
8.5 / 8.6 /8.7 / 8.8 / 8.9 / 8.11
/ 8.12
Torque gauge, Tension
Gauge, small parts
Children’s toys
Soft-filled toys and soft-filled parts
of a toy
EN 71-1:2011+A3:2014
Clause 5.2
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.2 / 8.4.2.2 / 8.10
Seam clamp, tension
gauge, accessibility
probe
Version 002 Issued: 08/16/2016 Page 19 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s toys
Plastic sheeting
EN 71-1:2011+A3:2014
Clause 5.3
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.4.2.1 / 8.25.1 /
8.25.2
Micrometer, Feeler
Gauge, Tension Gauge
Children’s toys
Cords, chains and electrical cables in
Toys
EN 71-1:2011+A3:2014
Clause 5.4
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.36 / 8.38 / 8.39 /
8.40 / Except 8.20
Ruler, Observation
Children’s toys
Liquid-filled toys
EN 71-1:2011+A3:2014
Clause 5.5
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clause 8.15
1 mm diameter steel
needle
Children’s toys
Glass and porcelain
EN 71-1:2011+A3:2014
Clause 5.7
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clause 5.7
Observation
Children’s toys
Shape and size of certain toys
EN 71-1:2011+A3:2014
Clause 5.8
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clause 8.16
Template A and
template B
Children’s toys
Toys comprising monofilament fiber
EN 71-1:2011+A3:2014
Clause 5.9
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clause 5.9
Ruler, Observation
Children’s toys
Small balls
EN 71-1:2011+A3:2014
Clause 5.10
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.3 / 8.4.2.1 / 8.5 /
8.6 / 8.7 / 8.8 / 8.9 / 8.32.1 /
8.32.2
Template E
Children’s toys
Play Figures
EN 71-1:2011+A3:2014
Clause 5.11
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clause 8.33
Template B
Children’s toys
Hemispheric-shaped toys
EN 71-1:2011+A3:2014
Clause 5.12
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.3 / 8.4.2.1 / 8.5 /
8.6 / 8.7 / 8.8 / 8.98.3 /
8.4.2.1 / 8.5 / 8.6 / 8.7 / 8.8 /
8.9
Observation
Measurement
Children’s toys
Suction cups
EN 71-1:2011+A3:2014
Clause 5.13
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.3 / 8.4.2.1 / 8.5 /
8.6 / 8.7 / 8.8 / 8.32.1
Template E, observation
Version 002 Issued: 08/16/2016 Page 20 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s toys
Straps Intended to be Worn Fully or
Partially Around the Neck
Clause 5.14
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.38
Force gauge
Children’s toys
Packaging
EN 71-1:2011+A3:2014
Clause 6
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.3 / 8.4.2.1 / 8.25.1 /
8.32.1
Observation, dial
indicator
Children’s toys
Warnings, markings and instructions
for use
EN 71-1:2011+A3:2014
Clause 7
EN 71-1:2011+A3:2014
BS EN 71-1:2011+A3:2014
Clauses 8.11 / 8.12 /
Clause 7 except 7.7 / 7.10.3
Observation
Children’s toys
Normal use
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.1
ISO 8124-1: 2014(E)
AS/NZS ISO 8124.1:2013
Clause 5.1 – 5.23 Except
5.11/5.13.2.2/5.14-5.17/5.20
Observation and
appropriate equipment
following; washing
machine, tumble dryer
Children’s toys
Reasonably foreseeable abuse
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.2
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 5.24 relevant tests
Abuse test equipment
Children’s toys
Materials
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.3
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 5.2 Small part test and
Clause 5.21
Observation,
measurement, small part
cylinder
Children’s toys
Small parts
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.4
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 5.24 abuse test,
Clause 5.2 small part test
Abuse test equipment,
small part cylinder
Children’s toys
Shape, size and strength of certain
toys
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.5
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clauses 5.3 / 5.4 / 5.5 / 5.6 /
5.24 / 5.24.6.3
Templates A & B
Children’s toys
Edges
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.6
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clauses 5.8 / 5.24.5 / 5.24.6.1
/ 5.24.7
Accessibility Probe,
Sharp edge Tester and
PTFE tape
Version 002 Issued: 08/16/2016 Page 21 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s toys
Points
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.7
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 5.9
Accessibility Probe,
Sharp point Tester
Children’s toys
Projections
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.8
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 5.24
Abuse test equipment
Children’s toys
Metal wire and rods
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.9
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clauses 5.8 / 5.9 / 5.24.6.4 /
5.24.8
Flexure test fixture
Children’s toys
Plastic film or plastic bags in
packaging and in toys
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.10
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 5.10
Micrometer
Children’s toys
Cords and elastics
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.11 except 4.11.7
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clauses 4.11 relevant
sections, 5.11 except 5.11.3
Force gauge, weights
Children’s toys
Folding mechanisms
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.12
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 5.22
50-kg , 25-kg load
Children’s toys
Holes, clearances and accessibility of
mechanisms
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.13
ISO 8124-1:2014
AS/NZS ISO 8124.1:2013
Clauses 4.13, 5.7
5-mm, 12-mm diameter
rod
Children’s toys
Springs
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.14
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.14
Force gauge, length-
measuring device
Children’s toys
Stability and overload requirements
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.15 except the part of 4.15.2
regarding wheeled ride-on toys
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 5.12
Except 5.24.4 by virtue of
exception regarding wheeled
ride-on toys
25-kg 50-kg load, incline
plane
Version 002 Issued: 08/16/2016 Page 22 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s toys
Enclosures
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.16
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 5.13
Except 5.13.2.2
Tension gauge, ruler
Children’s toys
Aquatic toys
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.19
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.19
Calipers
Children’s toys
Toys containing a heat source
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.23
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 5.18
Thermocouple
Children’s toys
Liquid-filled toys
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.24
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 5.19
Needle
Children’s toys
Mouth-actuated toys
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.25
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clauses 5.2 / 5.24.5 /
5.24.6.1/ Except 5.20
Torque wrench, force
gauge, small parts
cylinder
Children’s toys
Percussion caps
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.27
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.27
Observation
Children’s toys
Acoustic Requirements
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.28
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 5.25
Sound meter
Children’s toys
Magnets and magnetic components
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clause 4.30
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Clauses 5.31 – 5.34
DC field gauss meter,
axial probe
Observation
Children’s toys
Safety-labelling guidelines
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Annex B.2 except B.2.14 – B.2.17,
B.2.20
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Annex B.2 except B.2.14 –
B.2.17, B.2.20
Observation
Children’s toys
Instructional literature
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Annex B.3
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Annex B.3
Observation
Version 002 Issued: 08/16/2016 Page 23 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s toys
Manufacturer’s markings
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Annex B.4
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Annex B.4
Observation
Children’s toys
Toy Gun Marking
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Annex D
ISO 8124-1:2014(E)
AS/NZS ISO 8124.1:2013
Annex D
Calipers
Children’s toys and
articles for learning
(Canada) Toys Regulations
(SOR/2011-17) section 3, Written
Statements, with amendment
(SOR/2016-195)
SOR/2011-17 section 3,
Official Languages, with
amendment SOR/2016-195
Observation
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 section 4 Packaging,
with amendment (SOR/2016-195)
Canada method M03 – Test
Method for Flexible Film
Bags
Micrometer
Template
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 section 7 Small Parts
with amendment (SOR/2016-195)
Canada method M00.1 –
Small Components
Small Parts Cylinder
Force Gauge
13mm flat bottom mass
35 mm flat bottom mass
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 section 8
Metal Edges, with amendment
(SOR/2016-195)
Canada method M00.2 –
Sharp Edges
Sharp Edge Tester
PTFE tape
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 section 9 Wire Frames,
with amendment (SOR/2016-195)
Canada method M00.3 –
Sharp Points Sharp Point Tester
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 section 10 Plastic
Edges, with amendment
(SOR/2016-195)
Canada method M00.2 –
Sharp Edges
Canada method M01.1 –
Reasonable Foreseeable Use
Observation
Sharp Edge Tester
PTFE tape
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 section 11 Wood, with
amendment (SOR/2016-195)
Canada method M00.2 –
Sharp Edges
M01.1 – Reasonable
Foreseeable Use
Observation
Sharp Edge Tester
PTFE tape
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 section 12 Glass, with
amendment (SOR/2016-195)
Canada method M00.2 –
Sharp Edges
M01.1 – Reasonable
Foreseeable Use
Observation
Sharp Edge Tester
PTFE tape
Version 002 Issued: 08/16/2016 Page 24 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 section 13 Fastener,
with amendment (SOR/2016-195)
Canada method M00.2 –
Sharp Edges
Canada method M00.3 –
Sharp Points
Canada method M01.1 –
Reasonable Foreseeable Use
Observation
Sharp Point Tester
Sharp Edge Tester
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 section 14 Safety Stops
or locking devices - Folding
Mechanism, bracket and bracing,
with amendment (SOR/2016-195)
SOR/2011-17 section 14,
Safety Stops or Locking
Devices, with amendment
SOR/2016-195
Observation
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 section 15 Spring
wound driving mechanism, with
amendment (SOR/2016-195)
Canada method M01.1 –
Reasonable Foreseeable Use
2mm Rod
10mm Rod
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 section 16
Projectile Components, with
amendment (SOR/2016-195)
Canada method M01.1 –
Reasonable Foreseeable Use
Tension Gauge
Observation
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 section 17
Enclosures, with amendment
(SOR/2016-195)
SOR/2011-17 section 17,
Enclosures, with amendment
SOR/2016-195
Measuring Device
Observation
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 section 18
Stability, with amendment
(SOR/2016-195)
Stability Test
ASTM F963-11
Incline Platform
Protractor
Test weight
Wedge Blocks
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 section 19
Auditory Hazards, with amendment
(SOR/2016-195)
Canada Method M-04 Sound meter
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 Dolls, Plush Toys and
Soft Toys: sections 28 Fastenings,
30 Small Parts, 31 Eyes and Noses,
with amendment (SOR/2016-195)
Canada methods M01.1 &
M01.2 – Reasonable
Foreseeable Use
Reasonable Foreseeable
Use test equipment
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 Dolls, Plush Toys and
Soft Toys: section 29 Stuffing
(Visual Only), with amendment
(SOR/2016-195)
SOR/2011-17 section 29,
(Visual assessment only),
with amendment
SOR/2016-195
Observation
Version 002 Issued: 08/16/2016 Page 25 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 sections 35, 36 Plant
Seeds, with amendment
(SOR/2016-195)
SOR/2011-17 section 35,
Plant Seeds – noise,
SOR/2011-17 section
36,Plant Seeds – stuffing
Material, with amendment
SOR/2016-195
Observation
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 section 37
Pull and Push Toys, with amendment
(SOR/2016-195)
SOR/2011-17 section 37,
Shaft Like Handles, with
amendment SOR/2016-195
Tension Gauge
Observation
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 section 40 Rattles,
with amendment (SOR/2016-195)
Canada method M05 –
Test Method for Rattles
Rattle Template
Reasonable Foreseeable
Use test equipment
Children’s toys and
articles for learning
(Canada) Toys Regulations
SOR/2011-17 section 41 Elastic, with
amendment (SOR/2016-195)
SOR/2011-17 section 41,
Length or extensibility, with
amendment SOR/2016-195
Measuring Device
Textiles Standard Flammability of Clothing
Textiles 16 CFR 1610
45° Angle Flammability
Tester
Textiles Standard Test Method for
Flammability of Apparel Textiles ASTM D1230-10(2016)
45° Angle Flammability
Tester
Textiles (Canada) Textile Flammability
Regulations
CAN/CGSB-4.2
No. 27.5-2008
45° Angle Flammability
Tester
Textiles Flame Resistance of Textiles,
Vertical Test ASTM D6413/D6413M-15
Vertical Flammability
Tester
Textiles Rules and Regulations for Labeling
of Textile Products
16 CFR Part 300
16 CFR Part 301
16 CFR Part 303
Observation
Textiles Care Labeling of Textile Wearing
Apparel and Certain Piece Goods 16 CFR Part 423 Observation
Textiles in
Children’s Toys
(Canada) Toys Regulations
SOR/2011-17 sections
32 flammability of outer covering,
33 flammability of yarn,
34 flammability of hair or mane, with
amendment (SOR/2016-195)
Toys Regulations
SOR/2011-17 Schedules 5-7,
with amendment
SOR/2016-195
45° Angle Flammability
Tester
Children’s Sleepwear
Standard for the Flammability of
Children’s Sleepwear: Sizes 0
through 6X (FF 3-71) and Sizes 7
through 14 (FF 5-74)
16 CFR Part 1615
16 CFR Part 1616
Vertical Flammability
Tester
Version 002 Issued: 08/16/2016 Page 26 of 26
│ │ │
ITEMS,
MATERIALS OR
PRODUCTS
TESTED
SPECIFIC TESTS OR
PROPERTIES MEASURED
SPECIFICATION,
STANDARD METHOD
OR TECHNIQUE USED
*KEY EQUIPMENT
OR TECHNOLOGY
Carpets and Rugs
Standard for the Surface
Flammability of Carpets and Rugs
(FF 1-70) and Small Carpets and
Rugs (FF 2-70)
16 CFR Part 1630
16 CFR Part 1631
Flammability Test
Chamber
Tents Specification for Flame-Resistant
Materials used in Camping Tentage CPAI-84, 1995
Vertical Flammability
Tester
Tents
(Canada) Hazardous Products (Tents)
Flammability Regulations
SOR/2016-185
Canada Method F-16 Vertical Flammability
Tester
Notes:
1. * = As Applicable
2. This scope is formatted as part of a single document including the Certificate of Accreditation No. AT – 1407.