505 King Avenue | Columbus, Ohio 43201-2696 | 614-424-6496 | mundya@battelle.org | www.mmpds.org

Announcing the

31st MMPDS Coordination Meeting September 12-15, 2017

Atlanta (Buckhead) Georgia Embassy Suites

Meeting Schedule

A detailed meeting schedule is attached and can also be found on the MMPDS website at www.mmpds.org.

Noteworthy:

• The Industrial Steering Group (ISG – members and invited guests only) and Government Steering

Group (GSG - members and invited guests only) will meet separately beginning at 8:00 am on

Tuesday, September 12th. At 2:45 pm, the ASG and MATSSG group meetings will begin,

concurrently; and all meeting attendees are invited to attend as appropriate for your organization.

• Wednesday, September 13th, will begin with the Guidelines Task Group (GTG) meeting from 8:00 am

to 3:00 pm. The ETWG meeting will take place at 3:15. An ETWG Agenda is forthcoming.

• Thursday, September 14th, multiple Task Group meetings will occur throughout the day. • A lunch buffet is included with meeting fees on Tuesday, Wednesday, and Thursday. • Friday, at 8:00 am, the General Coordination Committee (GCC) will take place. At 10:15 am,

depending on need, the meeting will continue, OR, there will be a demo of the newest version of MIDAS. Meetings will conclude by noon.

• A sortable version of the Agenda Summary is available on both the member SharePoint site, or for non-members, it can be found at www.mmpds.org, under the tab for Meetings.

Registration

Meeting attendees will receive a discounted rate for advanced registration if the completed Registration Form, including method of payment, is returned to Battelle before August 25. Registration rates can be found on the attached Meeting Registration Form. Credit Cards will not be charged until after the meeting has ended.

Hotel Accommodations

The Embassy Suites’ MMPDS Sleeping Room Group Rate is $140.00 USD. Cut-off date for reserving rooms is August 25, assuming rooms are not sold out prior to that date. It is strongly recommended that you make your reservation as soon as possible before rooms runout.

To make your hotel reservation, follow this link: http://embassysuites.hilton.com/en/es/groups/personalized/A/ATLLXES-BAT-20170911/index.jhtml?WT.mc_id=POG NOTE, if you want to reserve a room using any of the pre or post meeting days at the meeting rate, that reservation must be phoned in special. Please call Brittany Bowens at the Embassy Suites, 404-266-4828, Rates are offered for 3 days before and after the meeting, subject to availability.

You can also call in your reservation at 1-888-370-0985 and use Group Code “BAT”, however they will not be able to give you the rate outside of the meeting dates. There is a 24 hour cancellation policy. You must cancel by 3pm the day prior to arrival to avoid a cancellation fee of 1 night room and tax.

�.. Continued..�

505 King Avenue | Columbus, Ohio 43201-2696 | 614-424-6496 | mundya@battelle.org | www.mmpds.org 2

The Group room rate includes the following:

o Complimentary Hot Breakfast – 6:30am to 9:00am (Note there will still be a continental breakfast at the meeting.)

o Manager’s Reception - Free snacks and cold beverages from 5:30pm to 7:30 p.m.

o Wireless Internet Access – High speed Internet in all sleeping rooms and other areas. Self-Parking is discounted to $20.00 per day, and valet parking is $32 day.

Check In Time: 3:00pm Check Out Time: 12:00pm A valid credit card and photo ID to be presented at check in.

To learn more about the Embassy Suites Buckhead, click below:

http://embassysuites3.hilton.com/en/hotels/georgia/embassy-suites-by-hilton-atlanta-buckhead-ATLLXES/index.html

Questions? Please email Anne Mundy at mundya@battelle.org. We look forward to seeing you in Atlanta.

Time

7:30-8:00

8:00-10:00

10:00-10:15

10:15-11:00

11:00-12:00

12:00-1:00

1:00-2:30

2:30-2:45

2:45-3:00

3:00-3:15

3:15-4:00

4:00-5:00

5:00-6:00

Key:

ASG - Airframer Steering Group GTG - Guidelines Task Group

ETWG - Emerging Technology Working Group ISG - Industry Steering Group (members only)

FatWG - Fatigue Working Group MATSSG- Materials and Test Services Steering Group

FTG - Fastener Task Group MTG - Material Task Group

GCC - General Coordination Committee PSG - Propulsion Steering Group

GSG - Government Steering Group (members only) WWG - Welding Working Group

31st MMPDS Coordination Meeting

Preliminary ScheduleSeptember 12-15, 2017, Buckhead, Georgia

Tuesday Wednesday Thursday Friday

Continental Breakfast Continental Breakfast Continental Breakfast Continental Breakfast

ISG

(members

only)

GSG

(members

only)

GTG MTG FTG

GCC (Include Report

from Executive

Board, Steering

Groups, and Review

of Items)

Break Break Break Break

ISG

(members

only)

GSG

(members

only)

GTG MTG FTG

GCC continued or

MIDAS demonstration

as needed

Joint ISG/GSG

(members only)GTG MTG FTG

Break

ASG MATSSG

Break Break

ETWG

PSG WWG

(ASG if

needed)

Executive

BoardFatWG

Lunch

(buffet included in

fee)

Lunch

(buffet included in

fee)

Lunch

(buffet included in

fee)

Final Initial

03-14 MTG 1Review of Currency of Existing

Database on Legacy AlloysStatus J. Rubadue will give a status report.

04-21 FTG 8Fastener Tables of Sunset Review

InterestOn Hold M. Tefend will give a status report

08-23 FTG 8Sunset Review of Table 8.1.3.2.2(c),

NAS1921CStatus M. Tefend will give a status report

09-13 FTG 8Sunset Review of Table 8.1.3.2.3(a),

MS21140Agenda

Additional Data received. M. Tefend to present the

sunset shear analysis on this table.

09-16 GTG WWG 8Review of Section 8.2 Metallurgical

JointsAgenda

M. Tefend will present an agenda on this Item. Please

send any comments by August 11th to prepare final

agenda item.

10-13 MTG ASG 2 Wrought Steels S-Basis Summary Status J. Rubadue will give a status report.

10-14 MTG 3Wrought Aluminum Alloys with S-Basis

MinimumsStatus J. Rubadue will give a status report.

10-15 MTG 3Mechanical Properties for Aluminum

Alloy Forgings Status J. Rubadue will give a status report.

10-17 MTG 3Re-evaluate Legacy Alloy Stress-Strain

Curves in Chapter 3On Hold

No new stress-strain curves on legacy alloys have been

obtained since last meeting

10-25 GTG-F FTG 9Fastener Installation Parameters for

Joint Tension AllowablesAgenda

M. Tefend will present an agenda on this Item which

includes the suggested changes from Boeing's

presentation from the last meeting.

11-05 MTG 1 AMS Coordination Status

The AMS meeting is the week following MMPDS.

Information from the meeting will be included in the

minutes.

11-15 MTG 2Division of Low Alloy Steel Table

2.3.1.0(g2) Status J. Rubadue will give a status report.

11-38 FTG 8

Sunset Review of Flush Head,

Mechanical Lock Spindle Blind Rivet

Table 8.1.3.2.2(e) NAS 1921 M

AgendaLap Joint data Data received. M. Tefend to presnet the

sunset lap joint strength analysis on this table

31st MMPDS Coordination Meeting

AGENDA ITEM SUMMARY - Preliminary

SORTED BY ITEM NUMBER

Item NoResponsible Group

Chpt Title Type 31st Meeting Description

Final Initial

31st MMPDS Coordination Meeting

AGENDA ITEM SUMMARY - Preliminary

SORTED BY ITEM NUMBER

Item NoResponsible Group

Chpt Title Type 31st Meeting Description

11-43 FTG 8Supporting Data and Basis

Identification for Table 8.1.2(b)Status M. Tefend will give a status report

12-16 MTGASG/

MATSSG2

Footnote for Steel When Test

Specimen is Not From Full ThicknessStatus J. Rubadue will give a status report.

12-17 MTG MATSSG 6

Footnote for Non-Ferrous Alloys Test

Specimen When Not From Full

Thickness

On Hold This item is on hold until Item 12-16 is resolved.

12-44 MTG 5Design Allowable Properties for Ti-3Al-

2.5V TubingStatus

Requesting additional data for tubing per AMS4943 (90

ksi hydraulic seamless tubing) to be used with orbital

weld data. Some data are available, but more are

needed for A/B-basis.

12-45 MTG 2 21-6-9 Tubing StatusData are requested for AMS5561 tubing, and AMS5595

sheet & plate

12-50 GTG-F FTG 9Evaluation of new Regression and

Confidence Models for Lap Joint TestsAgenda M. Tefend will present an agenda on this Item.

12-52 GTG-F FTG 9 Fastener Minimum t/D Requirements Agenda M. Tefend will present an agenda on this Item.

12-89 GTG PSG 9Target Materials for Propulsion

ApplicationsStatus This is a placeholder item for the PSG

12-105 GTG-F FTG 9Modification to the Sunset Criteria

ProceduresOn Hold M. Tefend will give a status report

13-32 MTG 3

Bearing Strength Reduction for

Edgewise Orientation from Extruded

Bar

On Hold

Available data is analyzed and included in appropriate

alloy tables. Would like to have data from other

suppliers before determining knock-down factors that

can be used where other orientation is unknown.

13-34 MTG 5Addition of AMS 4919 Ti-6-2-4-2 Plate

PropertiesStatus Data are needed.

13-35 MTG MATSSG 6

Upgrade S-Basis to A- and B-Basis for

718 Bar Nickel-Base Alloys per AMS

5962

Agenda

J. Rubadue will present this agenda item. MATSSG is to

review footnote to address concern on consistency of

through-thickness properties.

Final Initial

31st MMPDS Coordination Meeting

AGENDA ITEM SUMMARY - Preliminary

SORTED BY ITEM NUMBER

Item NoResponsible Group

Chpt Title Type 31st Meeting Description

13-43 MTG 3Addition of ST Bearing Properties for

7085-T7451 PlateStatus Waiting on data

13-50 GTG 9 ASTM Coordination Status A status report on related ASTM interest will be given.

14-13 GTG 9Recommended Test Orientations and

Test Plane for Round ProductAgenda

J. Rubadue will present this item in conjunction with

Item 15-12.

14-19 GTG 9Inclusion of Kisi Fracture Toughness

DataOn Hold R. Rice will review status

14-21 GTG WWG 9

Update of Section 9.2.4.8 Fusion

Welded Joints to Clarify Method and

Basis

Status M. Tefend will give a status report

14-24 MTG 4 thru 7

Identification of Stress-Strain Curves

Which Have Been Evaluated for 2-

Shape Factor for Chapters 4-7

On Hold R. Rice will review status

14-28 FTG 8

Sunset Review of Table 8.1.4.2(i),

LGPL2SC-V Pin, 3SLC-C Collar in Clad

7075-T6

Status M. Tefend will give a status report

14-61 GTG PSG 9 Update Creep Guidelines Agenda D.Hall will review the agenda item

14-62 GTG 9Evaluate Inclusion of other Fracture

Toughness Data (JIC, KJIC)Agenda R.Rice will review the agenda item

14-66 MTG 2Addition of 15-5PH Sheet S-Basis per

AMS 5862 for H1025 Condition Status Waiting on data

14-67 MTG 3Addition of 3-6 Inch Range for 7075-

T73X Bar and Rod per AMS 4124Status Waiting on data

15-12 GTG 9 Bearing Failure Modes AgendaJ. Rubadue will present this item in conjunction with

Item 14-13.

15-13 MTG 9Clarification of Shear Orientation for

Legacy AlloysStatus J. Rubadue will give a status report.

15-19 GTG-F FTG 9Verification of Secondary Modulus

Methods for FastenersStatus M. Tefend will give a status report

Final Initial

31st MMPDS Coordination Meeting

AGENDA ITEM SUMMARY - Preliminary

SORTED BY ITEM NUMBER

Item NoResponsible Group

Chpt Title Type 31st Meeting Description

15-33 GTG 8Update Design Reference for Section

8.3 BearingsAgenda J. Rubadue will present this agenda item.

15-34 GTG 9 Stress-Strain Curve Extension Agenda R.Rice will review the agenda item

15-36 GTG 9Modification of Indirect Analysis

EquationAgenda R.Rice will review the agenda item

15-37 GTG 9Guidelines for Strain-Rate Sensitive

MaterialsHandout R.Rice will review this handout

15-38 GTG 9

Reevaluation of Degrees of Freedom

Calculation for Regression with Effect

of Temperature

StatusSee results from 16-23 for a comparison of the current

and proposed method(s).

15-40 GTGASG/MAT

SSG9

Guidelines for When Specimens Are

Not From Full ThicknessStatus J. Rubadue will give a status report.

15-42 MTG 3Casting Allowables for 15-5PH and 17-

4PH steelPresentation J. Shah will make a presentation

15-45 GTG MATSSG 9

Requirement of Additional

Information on Specimen Shapes for

Forgings, Extrusions, and Castings

Status J. Rubadue will give a status report.

15-46 GTG MATSSG 9Cross-Sectional Information

Requirement for ExtrusionsPresentation The Extrusion Working Group will give a presentation.

15-51 GTG

ASG/

MATSSG/

GSG

9Periodic Testing of Materials for

Derived PropertiesAgenda This agenda item affects Item 17-23 also.

15-53 MTG MATSSG 3Mechanical Properties for 7099-

T7451, T7651 Aluminum Alloy PlateAgenda

J. Rubadue will present this agenda item. MATSSG will

review the introductory section.

16-02 GTG 9Updates to Strain Departure Methods

for Stress-Strain Curve AnalysesOn Hold R. Rice will review status

16-03 MTG 3

Modulus and Stress-Strain Curves for

2050-T852 Aluminum Alloy Die

Forging

Agenda R.Rice will review the agenda item

Final Initial

31st MMPDS Coordination Meeting

AGENDA ITEM SUMMARY - Preliminary

SORTED BY ITEM NUMBER

Item NoResponsible Group

Chpt Title Type 31st Meeting Description

16-10 MTG ASG 3Legacy Alloy 7075-T6 Indirect

Properties Update Status ASG will give an update.

16-12 FTGIdentifying Basis of Fastener Shear

Strength on Remaining TablesAgenda

Additional Data received from TriMas. M. Tefend to

present an agenda item on the data received.

16-13 FTG 8Corrections to Table 8.1.3.2.2(c) NAS

1921COn Hold M. Tefend will give a status report

16-15 GTG ETWG 9 Emerging Materials Status The agenda for ETWG will be posted once it is finalized.

16-20 GTG 9Equivalency Testing Assuming Change

in Process (From Item 11-40)Agenda R. Rice will present this agenda item.

16-22 MTG multiIdentification of Forging Types for

Tables with A- and B-basis Agenda J. Rubadue will present this agenda item.

16-23 MTG PSG 6

Re-evaluate Item 10-08 for Effect of

Temperature Curve vs Specification

Minimums

Agenda

R. Rice will present this agenda to compare results using

current method with results using proposed method

from Item 15-38.

16-24 GTG 9Guidelines for Modulus When Average

Value is InsufficientAgenda R. Rice will present this agenda item.

16-25 MTG MATSSG 6Extension of 718 Bar Gage Range for

AMS 5662 and AMS 5663 Agenda

J. Rubadue will present this agenda item. The analysis

was presented at the 29th meeting.

16-27 MTG 3Expansion of 2195-T8 Design

Allowable PropertiesAgenda J. Rubadue will present this agenda item.

16-29 GTG 1Review of Section 1.4.7 Bearing

PropertiesAgenda D. Hall will present this agenda item.

16-30 MTG 2AM-355 Stainless Steel in SCT850

ConditionStatus J. Rubadue will give a status report.

Final Initial

31st MMPDS Coordination Meeting

AGENDA ITEM SUMMARY - Preliminary

SORTED BY ITEM NUMBER

Item NoResponsible Group

Chpt Title Type 31st Meeting Description

16-32 MTG 3Mechanical Properties for 7097-T7651

Aluminum Alloy PlateAgenda J. Rubadue will review this agenda item

16-34 GTG 9

Review Guideline on Stress-Strain

Submittal for Number of Curves per

Thickness Range

Agenda R. Rice will present this agenda item.

16-36 GTG-F FTG 9

Use of T99 as A-Basis When Higher

than Specification for Fastener Shear

and Tension

Agenda M. Tefend will present an agenda on this Item.

16-37 GTG-F FTG 1Chapter 1 Guidelines on Fastener

Design Allowable UsageAgenda M. Tefend will present an agenda on this Item.

16-39 MTG 3 7010-T7451 Re-Analysis Status

If data are received in time, an agenda item will be

prepared. Data in hand from 2 suppliers. Waiting on

data from 1 other.

16-40 MTG 7Estimated Values in Table 7.3.2.0(c )

Copper Beryllium StripStatus

Airframers are asked to see if they are using this

material.

16-41 GTG 9Update Static Property Examples in

Section 9.8.1Status D. Hall will provide a status report on this item

17-01 MTG 3Expand range for 2024-T351 AMS

4120 to 8.0 inchesAgenda J. Rubadue will present this agenda item.

17-06a MTG 3Mechanical Properties for A206.0-T4

Sand CastingsAgenda D. Hall will provide a status report on this item

17-06b MTG 3Mechanical Properties for A206.0-T71

Sand CastingsAgenda D. Hall will provide a status report on this item

17-07 MTG 3Stress Corrosion Cracking Data for

7136 Aluminum Alloy ExtrusionsAgenda J. Rubadue will present this agenda item.

17-09 MTG 3 Fatigue Curves for 2099-T83 Extrusion On Hold Low priority item, no progress.

Final Initial

31st MMPDS Coordination Meeting

AGENDA ITEM SUMMARY - Preliminary

SORTED BY ITEM NUMBER

Item NoResponsible Group

Chpt Title Type 31st Meeting Description

17-10 MTG 4 Fatigue Curve for 2099-T81 Extrusion On Hold Low priority item, no progress.

17-11 MTG 5Fatigue Curve for 2026-T3511

ExtrusionOn Hold Low priority item, no progress.

17-12 MTG 6 Fatigue Curve for 2624-T351 Plate Agenda R.Rice will review the agenda item

17-19 MTG 2

Addition of Transverse Bearing

Strength Properties for Custom 465

Bar

StatusJ. Rubadue will give a status report. Data are requested

for the H950 and H1000 conditions.

17-23 GTG 9Legacy Alloy Review Strategy – Near

TermAgenda This Agenda item affects Item 15-51 also.

17-25 GTG 9Re-evaluation of Reduced Ratio

Sample Size DeterminationAgenda D.Hall will review the agenda item.

17-26 GTG ASG 9Guidelines for Generation and Use of

A/B Allowables for CastingsAgenda D. Hall will present this agenda item.

17-27 FatWG 9Add Requirement to Chapter 9 Fatigue

Correlative InformationAgenda R. Rice will present this agenda item.

17-28 GTG FTG 9

Consideration of Origin in Multiple

Regression Analysis for Joint

Allowables

Agenda M. Tefend will present an agenda on this Item.

17-29 GTG-F FTG 9

Replacement of T90 Yield Curve with a

Multiple-Regression Typical Yield

Curve for Joint Allowables

Agenda M. Tefend will present an agenda on this Item.

17-30 GTG-F FTG 9Revision of Table Format for Joint

AllowablesAgenda M. Tefend will present an agenda on this Item.

17-31 FTG 9Sunset Shear Strength Rule Criteria

AdditionAgenda M. Tefend will present an agenda on this Item.

17-32 GTG-F FTG 8 Edit Table 8.1.5.1 Agenda M. Tefend will present an agenda on this Item.

17-33 GTG 9Alternative Fitting Function for Effect

of Temperature DataAgenda D. Hall will review the agenda item.

Final Initial

31st MMPDS Coordination Meeting

AGENDA ITEM SUMMARY - Preliminary

SORTED BY ITEM NUMBER

Item NoResponsible Group

Chpt Title Type 31st Meeting Description

17-34 GTG SSWG 9Guidelines for Rejection of Stress-

Strain Curves from Parametric AnalysisHandout R.Rice will review this handout

17-35 MTG 5Re-analysis of ATI 425 Sheet Typical

Stress-Strain CurvesAgenda

Typical stress-strain through yield curves from Item 16-

18 will be re-analyzed to consider non monotonically

increasing stress-strain.

17-36 MTG 7Design Allowable Properties for

Toughmet 3 Plate per AMS4595Agenda

J. Rubadue will present this item if data are submitted in

time.

17-37 MTG 5

Revise Bearing Properties for Single

Melt ATI 425 Cold Rolled Sheet and

Strip (AMS6949)

Agenda

New section approved in Item 16-18 for MMPDS-12.

Additional bearing tests were conducted. J. Rubadue

will present this item.

17-38 MTG 3Editorial Correction in Fatigue Figure

Labels for 2024-T3 SheetAgenda

This item corrects the figure legend for 4 S/N figures

with notched data from Stress Ratio to Mean Stress.

17-39 GTG Stress-Strain Curve Working Group Status

Edwin will give a status report for this new group

(named SSCWG) would meet by telecoms between

meeting; E. Hernandez-Otero (lead), P. Vanderpol, R.

Brazil, J. Rossi, R. Rice, C. Heine, P. Wheelock, and R.

Reinmuller. A separate time will not be scheduled for

MMPDS meetings.

17-40 MTG 3

Removal of Fracture Toughness Data

for 7085-T7651 Plate in the 7-8 inch

range

Agenda J. Rubadue will present this agenda item.

17-41 MTG 3R-Curve for Alclad 2029-T8 Aluminum

Alloy SheetStatus R-curve data were submitted.

17-42 MTG multi Stabilization of AMS Specifications Agenda J. Rubadue will present this agenda item.

17-43 MTG 3R-Curve for 2624-T39 Aluminum Alloy

PlateStatus R-curve data were submitted.

Final Initial

31st MMPDS Coordination Meeting

AGENDA ITEM SUMMARY - Preliminary

SORTED BY ITEM NUMBER

Item NoResponsible Group

Chpt Title Type 31st Meeting Description

17-44 GTG 9Clarification of Ten-Lot Minimum

Requirement for Derived PropertiesAgenda

J. Rubadue will present this agenda item submitted by E.

Hernandez-Otero.

17-NIN FatWG Review Section 9.6.1 Status

D. Hall will lead discussions on review of this section.

Members are asked to review the section to determine

if there is a need to update it.

17-NIN MTG MATSSG 3Expand Thickness Range of 6061-T6X

Aluminum Alloy Plate to 12 inchesStatus

J. Rubadue will present a status report. Producers are

asked if there is an interest in increasing the AMS

specification(s) thickness range. AMS4027-T651 goes to

6.000 inch.

17-NIN MTG 3Inclusion of Properties for AMS 4221,

2124-T8151 PlateStatus Data are requested.

17-NIN MTG PSGSupplemental Data for Ti-6-2-4-2

"Product Form" Status R. Rice will give a status report on what data is on hand.

17-NIN MTG FCG Analysis for 2397-T87 Plate On Hold Low priority item, no progress.

17-NIN MTGRe-evaluate Fatigue Analysis for 2024-

T4 Multiple Product FormsOn Hold

This fatigue curve covers multiple product forms and

was done using equivalent stress method. It was noted

that one of the curves does not go through data points.

Re-evalute to see if this is a product form that needs to

be analyzed separately. Since fatigue is a supplemental

property, this item is on hold until balloted.

17-NIN GTG ETWGNorsk Titanium RPD™ Ti-6Al-4V

Material.Presentation P. Sodouri will give a presentation in the ETWG.

17-NIN MTGSteel Founders Society of America

(SFSA) DID ProgramPresentation

David Poweleit, from SFSA, would like to present a

proposal to include A/B-basis allowables for several

steel alloys.

ISG GTGClarification of ISG/MMPDS

Numbering SystemStatus

This has been assigned as ISG Agenda item 17-01. It will

be removed from the MMPDS Agenda item list after the

31st meeting

31st MMPDS Coordination Meeting Registration Form

Battelle Memorial Institute - 505 King Avenue | Columbus, Ohio 43201-2696 | 614-424-6496 | Mundya@battelle.org | www.battelle.org | www.mmpds.org

Today’s Date:

Attendee Information:

Name

Company

Address

City

State, Zip Code, Country

Phone

Email

MMPDS Steering Group Membership Status (please checkmark one):

REGISTRATION TYPE (Check One)

General Attendance (2 or More Dates)

One Day Only (Single Date of Meeting)

Name on Card:

Card Number:

Expiration Date:

Amount USD:

Secure ID Code: Zipcode for Billing Address:

Tuesday, September 12, 2017 8:00 am –ISG (Members Only)

8:00 am –GSG (Members Only) 1:00 pm - JOINT (GSG/ISG Members) 2:45 pm – MATSSG 2:45 pm – ASG

Wednesday, September 13, 2017 8:00 am – GTG 1:00 pm – GTG

3:15 pm – ETWG

Thursday, September 14, 2017 8:00 am – MTG

8:00 am – FTG

3:15 pm – PSG 3:15 pm – WWG

5:00 pm - FatWG

Friday,September 15, 2017 8:00 am – GCC 10:15 am – GCC or Poss MIDAS demo

Register in advance and SAVE! The advanced registration discount closes on August 25, 2017. The completed Meeting Registration

Form, including information for method of payment,

must be received at Battelle by this date in order to take advantage of the discounted rate.

Member Non-Member

METHOD OF PAYMENT

MasterCard

Visa

American Express

Discover

Check (Make out to Battelle)

RATES (includes buffet lunch on Tues, Wed, and Thur)

Prior to August 25, 2017 After August 25, 2017 Member - $550 USD (2 or more dates) Members & Non-Members

Member - $300 USD (1 date) $700 USD (2 or more dates)

Non-Member - $600 USD (2 or more dates) $400 USD (One Date)

Non-Member - $350 USD (1 Date)