6
3BK 17422 3041 QZZZA 03 Alcatel BSS Alcatel 9100 BTS Alcatel 9100 MBS GSM Commissioning manual CCL Release B9

ALU 2G commissioning

  • Upload
    noelcnl

  • View
    77

  • Download
    1

Embed Size (px)

DESCRIPTION

ALU 2G BTS this help u to find commissioning

Citation preview

Page 1: ALU 2G commissioning

3BK 17422 3041 QZZZA 03

Alcatel BSS

Alcatel 9100 BTS Alcatel 9100 MBS GSM

Commissioning manual CCL Release B9

Page 2: ALU 2G commissioning

2 / 6

3BK 17422 3041 QZZZA 02

Status Released

Change Note CREATION

Short Title Completion Check List

All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel.

Page 3: ALU 2G commissioning

Completion Check List

3BK 17422 3041 QZZZA 03

3 / 6

CCL Alcatel 9100 BTS

Alcatel 9100 MBS GSM Commissioning Manual

Release B9

Identification Customer name

Equipment identification

Type:

Factory Serial number:

BTS configuration:

Site:

Address:

Documents applied Document Ed OK NOK Document Ed OK NOK

3DF 00462 0004 AAAGA 8BL 00704 0015 DRBRA 3DF 00300 0004 UAZZA 8BL 00471 0621 DCAGB 3BK 17422 0002 PCZZA 8BL 00704 0059 DRZZA 3BK 17257 0001 RJZZA 8BL 00704 0032 DRBRA 3BK 20458 0001 RJZZA 8BL 00704 0034 DRBRA 8BL 00704 0016 DRBRA 8BL 00704 0058 DRZZA 8BL 00704 0067 DRZZA 8BL 00704 0068 DRZZA

Signature and comments of the people involved Name

Signature Name Signature

Start date

End date

Time spent on site

General comments

REPORT Record the results as the work proceeds in table 1

Record fault details in table 2.

Page 4: ALU 2G commissioning

Completion Check List

4 / 6

3BK 17422 3041 QZZZA 03

yes put a cross if task performed no put a cross if task not performed n.a not applicable (for option example) a.r fault cleared on site for this chapter (enter the fault number from table 2) a.n.r fault not cleared for this chapter (enter the fault number from table 2)

Table 1 Operating steps in the method document

Chapter Title work performed yes no n.a. a.r a.n.r

2 2.1 2.2

Preliminary Checks Before leaving for the site Before starting (on arrival at the site)

3 3.1 3.2 3.3

Options: Connection of the GPS antenna Hardware reconfiguration SUMACA cable connection

4 4.1 4.2 4.3 4.4 4.5

4.6

4.7

4.8 4.9

4.10

Check the Power Supply and Power Up the BTS Case 1: Alcatel 9100 BTS Indoor Case 2: Alcatel 9100 BTS FV AA Outdoor Case 3: Alcatel 9100 BTS FV BA Outdoor Case 4: Alcatel 9100 BTS AC Indoor Case 5: Alcatel 9100 BTS Evolution AC Indoor and Alcatel 9100 BTS Evolution DC Indoor Case 6: Alcatel 9100 MBS GSM AC Indoor and Alcatel 9100 MBS GSM DC Indoor and Alcatel 9100 MBS GSM AC Indoor Used as DC Case 7: Alcatel 9100 BTS Evolution Outdoor and Alcatel 9100 CPT BTS Evolution Case 8: Alcatel9100 MBS GSM Outdoor Case 9: Alcatel 9100 MBS GSM Evolution Outdoor Case10: Alcatel 9100 Compact BTS Outdoor Operation of battery back up? Yes No

Page 5: ALU 2G commissioning

Completion Check List

3BK 17422 3041 QZZZA 03

5 / 6

Chapter Title work performed yes no n.a. a.r a.n.r

5 5.1

5.2

5.3

5.4

5.5

5.6

5.7

5.8

5.9

5.10

5.11

5.12

Commissioning tests

BTS Software downloading

Select the frequencies Setting the antenna mapping Sector n = Sector___ Sector r = Sector___Sector p = Sector___ Sector s = Sector___ Sector q = Sector___ Sector t = Sector___

Set TMA parameters Set TWIN TRE mode

Check RF Cabling

BTS Initialization

Perform BTS Inventory

Set the PM18 Parameters

Check the PM18R Failure Alarm

Option: Inhibit Power Down Timer

Set the Number of Supervised PM12 Modules

Set the BTS Class

Set the Battery Parameters

Set and Check the External Alarms

Check the Status of Modules

5.13

5.14 5.15

Check the Antenna VSWR On load - VSWR2 - (if appropriate): ANX __ : ____ ____ ANX__ : ____ ____ ANX__ : ____ ____ ANX__ : ____ ____ ANX__ : ____ ____ ANX__ : ____ ____ On antenna - VSWR1 - (if appropriate): ANX __ : ____ ____ ANX__ : ____ ____ ANX__ : ____ ____ ANX__ : ____ ____ ANX__ : ____ ____ ANX__ : ____ ____

Disable antenna ports not connected Abis Loop Test End of Commissioning

6 Set Transmission Module Parameters Qmux address: ____

7 Connect the BSC 8 Finish Commissioning

Page 6: ALU 2G commissioning

Completion Check List

6 / 6

3BK 17422 3041 QZZZA 03

Comments

Table 2 Notes - Comments - Faults

Number Description Cleared

1

Method chapter :

Fault report reference : date :

name :

date:

2

Method chapter :

Fault report reference : date :

name :

date::

3

Method chapter :

Fault report reference : date :

name :

date:

4

Method chapter :

Fault report reference : date :

name :

date:

5

Method chapter :

Fault report reference : date :

name :

date:

6

Method chapter :

Fault report reference : date :

name :

date:

7

Method chapter : Fault report reference : date :

name : date:

8

Method chapter : Fault report reference : date :

name : date: