Roma, Italy

TL seriesProduct Leaflet

MICROWAVE RADIO

A hybrid (IP & TDM) high capacity microwave radio system

designed for trunk and long haul links. With up to 16 RF channels

and N+0/N+1 configurations, the TL is capable of providing

various solutions for high capacity wireless transport

infrastructures.

Suitable for multiple applications, from wireless backbone, spur

and fiber back-up, and capable of reaching critical locations

providing connectivity over water and terrain that other

transport media would fail to reach.

TL series

MEMBER OF:

TL.L.02.14 Data subject to change without notice • All rights reserved © SIAE MICROELETTRONICA S.p.A. www.siaemic.com

TL is available in all frequency bands from 4 to 13 Ghz with up to 16 STM-1 or 4 Gbits capacity, in N+1 or N+0 & M+1 or

M+0 configurations. In addition, for IP applications a L2 switch is embedded in the equipment.

MAIN FEATURES

TRMD Main signal transmission unit A high integration level to package in the TRMD; the Transmitter (TX), Receiver (RX), Mo-demodulator and base band

functions.

The one rack chassis can host up to 16 bidirectional RF carriers.

Minimization of frequency dependent spare parts has been achieved

through the use of wide-band units.

Easy operation and maintenance: no adjustment or provisional settings are required.

TL compact

TL compact available in all frequency bands from 4 to 13 Ghz (IT-R, FCC, NTIA) is the ideal solution

for a wide range of applications in access networks and backbone areas. The TL compact solution

provides up-to 4 RF carriers per cabinet (3+1 / 4+0), optimizing the costs.

With an IP55 weather hardened cabinet, it is possible to address a full outdoor installation, close to

the antenna reducing the waveguide losses and potentially removing the dehydrator that results in

a better TCO.

• N+1 or N+0 mixed configuration

ACCP/ACAP/CCDP with SD (space

diversity) & TSD (transmit space

diversity with up to 16 channels)

support in a single rack

• Full set of countermeasures

against fading in order to

maximize system performance

• 2.048 Mbit/s wayside traffic and 64

kbps digital service channels

• 1.554 Mbit/s wayside traffic

• Fixed or Adaptive Code Modulation

Technique 4/16/32/64/128/256/512

QAM

• STM-1 and Gigabit Ethernet (GE)

electrical or optical interfaces are

available with any mix of

combinations

• Easy on-site test and management

without measuring instruments:

automatic IF-IF response

adjustment

automatic SD DADE adjustment

automatic baseband DADE

adjusment

LAYER 2 SWITCH FUNCTIONALITIES

• Native IP radio

• VLAN Management

• Spanning tree

(STP/RSTP)

• Ethernet QoS (IEEE 802. /ToS/

DSCP)

• Link aggregation (L1)

• Traffic Shaping

TYPICAL APPLICATIONS

• 2G/3G/LTE Cellular Network infrastructure

• backup transmission medium to fiber

optic links

• High capacity IP Radio Rings

• Wireless backbone for all regional and

national networks

MICROWAVE RADIO

Product Data Sheet

TL series

Frequency Range Full coverage of ITU/R channels from 4 to 13 GHz

Supported configurations

N+1 or N+0 & M+1 or M+0 combined ACCP/ACAP/CCDP with/without SD/TSD

(single/dual RF band, Point-to-Point and Dual/Double Terminal)

All configurations can be provided with or w/o XPIC

Modulation schemes TDM 64 QAM for 4, 6U, 11 GHz

128 QAM for 4U, 6L, 7L, 7U, 8L, 13 GHz

IP 4, 16, 32, 64, 128, 256, 512 QAM

Supported capacities TDM Up to 16 STM1

IP Up to 4 Gbps

Transmit Power at TRMD unit output (dBm)

(standard/ / high power ) 4-8 GHz 11 GHz 13 GHz

4 QAM +33 / +30 +30 +27

16 QAM +33 / +30 +30 +27

32 QAM +33 / +30 +30 +27

64 QAM +33 / +29 +30 +27

128 QAM +32 / +29 +29 +27

256 QAM

512 QAM

+31 / +28

+30 / +27

+28

+27

+26

+25

RF Tuning range (No. of TMRD to cover a complete half band) 1 2 2

Receiver sensitivity at ber 10-6 TRMD unit imput:

Rx Power (dBm) (typ) IP TDM

4 QAM -90 -

16 QAM -84 -

32 QAM -81 -

64 QAM -78 -75.5

128 QAM -74 -72

256 QAM

512 QAM

-70

-64

-

-

Frequency stability ± 10 ppm

ATPC 20 dB range

Tributary interfaces Electrical/Optical STM-1/OC-3 (S.11, L1.1)

Electrical/Optical Gbit Ethernet

Service Channels

2x2 Mbits wayside channel STM1

1X64 Kbits G.703 per STM1

Express and Omnibus Order WIre

Additional features (optional)

XPIC for frequency reuse

STM-1 Ethernet Occasional channel

TSD Transmit Space Diversity

Dual RF

Double Terminal

Extended housekeeping input and output

Mechanical Dimensions Housed in an ETSI rack (1800x600x345 mm) (70.9x23.6x13.6 in)

Housed in an ETSI rack (2200x600x345 mm) (86.6x23.6x13.6 in)

Power supply Redundant separated power feeding

Power consumption (per terminal) 1+1 conf. 200 W

3+1 conf. 400 W

7+1 conf. 800 W

Environmental performance In accordance with EN300 019

TL.D.02.14 Data subject to change without notice • All rights reserved © SIAE MICROELETTRONICA S.p.A. www.siaemic.com