Airless. - QTech Spray

TriTech.

Aristospray (Ireland) Ltd2b Stephenstown Industrial ParkBalbrigganCounty DublinIrelandK32 KV26

Email [email protected] www.tritechairless.com

PhoneUK 01895 276751Ireland 01 690 3162International + 353 1690 3162

2b:creative - 028 9266 9888

TriTechAirlessAristospray@Aristospray

2021Airless.

2 3SprayForthedecorator.comTriTech Airless

Brought to you by Aristospray

DESIGNED. ENGINEERED. BUILT. ALL IN THE USA.

TriTech brings a unique combination of expertise, raw materials and manufacturing excellence together that cannot be equaled by any other airless sprayer available in today’s market.

TriTech.



Engineered using aerospace grade materials.It will only be the best when the best

materials are used.

High grade aluminiumUsed for control box, motor cover and heat sink

Removes heat from critical components

Opposite to plastic which is an insulator and keeps heat inPolished finish is easy to clean

Steel cut and precision ground gearsHigh efficiency, quieter operation

Run in synthetic grease

Positive heat transfer for longer bearing and gear life

Chrome plated heavy walled steel tubingImmensely strong and tough

Chromium plated for durability

Used for all TriTech frames

TriTech proprietary carbide blend Used for ball and seat

Ensures positive shut off

No component in the pump manifold will ever rust

Designed by professionals for professionals.One manifold for both filter and pumpEasy to clean, promotes proper drainage to keep clear of debris

Large porting connects pump to filterHand tightened filter bowl

All aerospace grade materials No component in the pump manifold will ever rust

Ball and seat made from TriTech unique carbide blend

Positive shut off ensures always ready to spray

Unique repacking system Correct alignment always ensured

Piston slides into intake valve assembly

Valve assembly threads into pump manifold

Exclusive to all TriTech airless sprayers



Motor & Drivetrain Lifetime WarrantyThe motor, motor brushes and drive train are warranted to the original purchaser only under normal use and service against defects in craftsmanship or material for the lifetime of the product.

Wearing Parts Two Year WarrantyShould the packings, piston or prime valve need replacing within two years of the original purchase this will be carried out by an approved service agent at no cost to the purchaser; this is limited to a one-time change only within the warranty period.

Craftsmanship Four Year WarrantyOutside of what is listed in the ‘Motor & Drivetrain Lifetime Warranty’ and the ‘Wearing Parts Two Year Warranty’ TriTech airless sprayers are warranted under normal use and service against manufacturing defects for four years from the date of original purchase. This includes the frame, the controller box and associated componentry and all other parts not specifically listed. Tyre failure due to puncture (where applicable) is excluded.

For the full warranty text refer to: www.TriTechAirless.com/warranty

Tough To Last. For Life.

built.



1

23

4

5

6

7

8

9

10

11 1. Heavy duty stainless steel pail hook makes easy work of moving the sprayer complete with a 20 litre bucket.

2. Steel cut and precision ground gears transfer the motor power to the pump with high efficiency and less noise than comparable pumps.

3. Motor speed control fully variable, even when spraying below 1500psi (100bar). There’s a zero dead band at lower pressures for precise application of fine finish type coatings.

4. Low speed priming and cleaning extends the service life of the pump manifold.

5. Control box has gasket seals on front and back plates to keep all internal components dry and away from contaminants.

6. Circuit board designed to withstand real on-site conditions where there is the potential for irregular voltage delivery from generators or temporary service.

7. When repacking the pump the unique design for inserting the piston ensures correct alignment through both packings. The piston is slid into the intake valve assembly which is then threaded into the pump manifold.

8. One manifold for both the filter and pump section, with no need for extra tubes and hoses. Large porting connects the pump to the filter. It’s easy to clean and promotes proper drainage to keep the filter and pump manifold clear of debris. All-stainless steel filter screen with outside in flow makes maintenance fast and easy. The filter bowl is hand tight so access requires no tools.

9. Aerospace grade materials are used for the manufacture of the pump. No component in the pump manifold will ever rust.

10. Pressure relief valve housing made from high quality stainless steel and the ball and seat are made from TriTech proprietary carbide blend for long duty life and reliability. The positive shut off that results means you’re always ready to spray.

11. No tools are needed to access the suction set or intake valve assembly, with only two bolts required to remove the fluid manifold from the crank housing.

the best.front view

12. Fully chromium plated heavy walled steel tubing frame for durability.

13. Semi-pneumatic tyres for no-flat reliability.

14. The electric motors are designed to exactly suit the specification of the pump. They are PMDC (permanent magnet direct current) and are warranted for the lifetime of the sprayer.

15. Synthetic grease is used throughout to help transfer heat for extended bearing and gear life.

16. Motor cover manufactured from high grade aluminium. Aluminium conducts heat away from critical components, unlike plastic which is so often used for motor covers. Plastic acts as an insulator and keeps the heat in.

17. The unique design of the cover promotes efficient use of air flow - this optimizes the motor power while still contributing to its extended service life.

18. Microprocessor programmed to perform at maximum efficiency for each tip size ensuring a consistent spray pattern at all pressure settings.

19. All components in the controller are “Made in America”.

20.High quality potentiometer enables precise pressure control at all settings, with pressure sensing performed by an electronic pressure transducer.

21. Electrical components are cooled by a heat sink which utilizes air flow to draw heat away from the control box. Both the control box and heat sink are made from high grade aluminium. Air flow is directed over the heat sink and thus keeps the motor and all control components cool for increased reliability.

22. On/off switch with thermal overload protection also serves as a circuit breaker to protect components in low voltage or power spike conditions.



back view 12

13

14

15

16

17

18

19

20

21

22

the best.

the best airless spray for the decorator.

Spray. For the decorator.


13SprayForthedecorator.comTriTech Airless12



TriTech T4 Carry Electric Airless Sprayer

Max tip 0.023”

Flow/minute 2.16 litres

MWP 227 bar /

3300 psi

Power supply 110 & 240 volt

Motor 820 watt PMDC

Weight 15 kg

110 volt 599-850

240 volt 599-810

Emulsion Once or Twice a Week Lifetime Warranty

T4. Carry TriTech

2.16ltrs/min

max tip0.023”

Use to SprayTop Coats.Wood Preservatives.Emulsion, interior and exterior.Most other low-viscosity water or solvent based coatings.

TriTech T360 Contractor Airless Spray Gun

TriTech Contractor 517 Airless Spray Tip

TriTech Contractor Safety Guard

1/4” x 15m Textile Braided Airless Paint Spray Hose

110 volt machines supplied with 16A plug

Complete With

When using a Transformer, minimum rating is 3.3 kVA



TriTech T4 Carry + Hopper Electric Airless Sprayer

Max tip 0.023”


MWP 227 bar /

3300 psi


Motor 820 watt PMDC

Weight 15.5 kg

110 volt 599-802

240 volt 599-812

T4. Carry + HopperTriTech

2.16ltrs/min

max tip0.023”







Complete With





TriTech T4 Hi Cart Electric Airless Sprayer

Max tip 0.023”


MWP 227 bar /

3300 psi


Motor 820 watt PMDC

Weight 30.4 kg

110 volt 599-851

240 volt 599-814 Special order only

T4. Hi CartTriTech

2.16ltrs/min

max tip0.023”







Complete With






Max tip 0.025”


MWP 227 bar /

3300 psi


Motor 970 watt PMDC

Weight 19.1 kg

110 volt 600-850

240 volt 600-810

T5. Carry TriTech

2.54ltrs/min

max tip0.025”

Use to SprayTop Coats.Wood Preservatives. Emulsion, interior and exterior.Most other medium-viscosity water or solvent based coatings.






Complete With

Emulsion Most of the Week Lifetime Warranty




TriTech T5 Carry + Hopper Electric Airless Sprayer

Max tip 0.025”


MWP 227 bar /

3300 psi


Motor 970 watt PMDC

Weight 19.6 kg

110 volt 600-802

240 volt 600-812

T5. Carry + Hopper TriTech

2.54ltrs/min

max tip0.025”







Complete With






Max tip 0.025”


MWP 227 bar /

3300 psi


Motor 970 watt PMDC

Weight 32.7 kg

110 volt 600-851

240 volt 600-814

T5. Hi Cart TriTech

2.54ltrs/min

max tip0.025”







Complete With






Max tip 0.027”


MWP 227 bar /

3300 psi


Motor 1195 watt PMDC

Weight 21.3 kg 110 volt 600-852 Special order only

240 volt 600-840 Special order only

T7. Carry TriTech

2.91ltrs/min

max tip0.027”

Use to SprayTop Coats.Wood Preservatives.Emulsion, interior and exterior.Heavy exterior coatings.Most other medium-viscosity water or solvent based coatings.






Complete With

Heavy Exterior Flat Out 24/7 Lifetime Warranty





Max tip 0.027”


MWP 227 bar /

3300 psi



Weight 34.9 kg

110 volt 600-853

240 volt 600-844

T7. Hi Cart TriTech

2.91ltrs/min

max tip0.027”







Complete With






Max tip 0.029” / 1-gun

0.017” / 2-guns


MWP 227 bar /

3300 psi



Weight 34.9 kg 110 volt 601-853

240 volt 601-844

T8. Hi Cart TriTech

3.40ltrs/min

max tip0.029” / 1-gun0.017” / 2-guns






Facility to use with 2-guns


Complete With







0.021” / 2-guns


MWP 227 bar /

3300 psi



Weight 44.0 kg

110 volt 602-823

240 volt 602-814

T9. Hi Cart TriTech

3.97ltrs/min

Use to SprayEmulsion, interior and exterior.Heavy exterior coatings.Majority of medium-high viscosity water or solvent based coatings with a solid content of up to 70%.Intumescents.







Complete With

Intumescent Most of the Week Lifetime Warranty

max tip0.031” / 1-gun0.021” / 2-guns






0.023” / 2-guns


MWP 227 bar /

3300 psi



Weight 47.6 kg

110 volt 602-853

240 volt 602-844

T11. Hi Cart TriTech

4.43ltrs/min

Use to SprayEmulsion, interior and exterior.Heavy exterior coatings.Majority of medium-high viscosity water or solvent based coatings with a solid content of up to 70%.Intumescents.

Intumescent Flat Out 24/7 Lifetime Warranty

max tip0.033” / 1-gun0.023” / 2-guns







Complete With




TriTech T360.

Contractor airless spray gun Use withAny of the TriTech and most other makes of airless sprayers PerformanceMWP | 250 bar | 3625 psi Supplied complete withTriTech Contractor 517 airless tip & guard 50 mesh inline filter360° swivel connector Product codes4-Finger | 7/8” | 503-1502-Finger | 7/8” | 503-152

TriTech T380.

Contractor airless spray gun Use withAny of the TriTech and most other makes of airless sprayers PerformanceMWP | 260 bar | 3800 psi Supplied complete withTriTech Contractor 517 airless tip & guard 50 mesh inline filter360° swivel connector Product code7/8” | 501-155

TriTech Contractor.

Airless spray tips Use withTriTech T360 Contractor airless spray gun for all general purpose applications. PerformanceMWP | 350 bar | 5075 psi Product codesContractor tips are prefixed QC, followed by three digits.

The first digit denotes the fan width measured in inches. This can range from 2” - 18”. Take half the required fan width to give the first digit. For example, if a 6” fan width is required, the first digit should be 3. The second and third digits denote the orifice size in thousandths of an inch, for example 15 = 0.015”. For satisfactory results and to avoid putting excessive strain on the pump the maximum tip size shown for each machine should not be exceeded. Full details are available at http://www.tritechairless.com/product/tritech-contractor-airless-spray-tip/

TriTech Ultra Finish.

Airless spray tips Use withTriTech T360 Contractor airless spray gun for all applications requiring a superior finish. PerformanceMWP | 350 bar | 5075 psi What makes the difference?In a conventional tip, the paint is atomized once. In an Ultra Finish Tip, it’s atomized twice. It’s this that gets that Ultra Finish, even when working at lower pressures. With a little practice total control can be achieved, with virtually no overspray.

Product codesUltra Finish tips are prefixed QUF-, followed by three digits.

The first digit denotes the fan width measured in inches. This can range from 2” - 12”. Take half the required fan width to give the first digit. For example, if a 4” fan width is required, the first digit should be 2. The second and third digits denote the orifice size in thousandths of an inch, for example 10 = 0.010”. For satisfactory results and to avoid putting excessive strain on the pump the maximum tip size shown for each machine should not be exceeded. Full details are available at http://www.tritechairless.com/product/tritech-ultra-finish-airless-spray-tip/

TriTech Tip Extensions.

Use withTriTech T360 Contractor airless spray gun PerformanceMWP | 290 bar | 4200 psi Supplied complete withTriTech Contractor guard Product codes7/8” thread6” | 110-20610” | 110-21215” | 110-21320” | 110-21430” | 110-21539” | 110-216

TriTechSwivel Connector.

Use withTriTech tip extension PerformanceMWP | 290 bar | 4200 psi Product code101-515

TriTech Spray Pole.

Use withTriTech T360 Contractor airless spray gun and compatible inline pole guns PerformanceMWP | 290 bar | 4200 psi Product codes7/8” thread18” | 106-02036” | 106-02272” | 106-024

TriTech 90° Angle Adaptor.

Use withTriTech spray pole PerformanceMWP | 290 bar | 4200 psi Product code106-041

TriTech Gun Repair Kit.

Use withTriTech T360/T380

Product code503-092



TriTech Hopper.

Complete assembly

Use withTriTech T4 Carry and T5 Carry electric airless sprayers Capacity6.0 litres Product code600-556

TriTech Packing Kit.

Use withTriTech T4, T5, T7 & T8

Product code600-455

Use withTriTech T9 & T11 Product code602-475

QTech QLube.

Piston lubricant

Use withAll TriTech electric airless sprayers SpecificationMade in the USA to OEM standard. Product codes8oz | 237 ml | Q400-00532oz | 946 ml | Q400-006

TriTech Piston.

Use withTriTech T4, T5 & T7

Product code600-090-75

Use withTriTech T8 Product code600-099-875 Use withTriTech T9 & T11 Product code602-099

QTechQTector.

Pump conditioner.

Use withAll TriTech electric airless sprayers SpecificationMade in the USA to OEM standard. Effective down to temperatures as low as -32°C. Product codes32oz | 946 ml | Q400-0101 US gallon | 3.8 ltrs | Q400-011

TriTech Prime Valve.

Use withTriTech T4, T5, T7, T8, T9 & T11

Product code600-157

Suction Filters.

Use withTriTech T4, T5 & T7 Carry electric airless sprayers Specification12 mesh | 7/8” UNF thread Product codeQF0574012B

Use withTriTech T4, T5 & T7HiCart electric airless sprayers Specification15 mesh | 1” thread Product codeQF0535015A

Manifold Filters.

Use withAll TriTech electric airless sprayers SpecificationStainless steel mesh Product codes20 mesh | QF052002050 mesh | QF0520050100 mesh | QF0520100

Gun Filters.

Use withTriTech T360 Contractor airless spray gun SpecificationStainless steel mesh Product codes30 mesh green | QF050103050 mesh white | QF050105065 mesh black | QF0501065100 mesh yellow | QF0501100150 mesh blue | QF0501150200 mesh red | QF0501200

Use withTriTech T8, T9 & T11HiCart electric airless sprayers Specification10 mesh | 1” thread Product codeQF0535010A

Documents

Airless. - QTech Spray