Upload
hallie
View
38
Download
1
Tags:
Embed Size (px)
DESCRIPTION
Accessing the Installer’s Menu. The entire cycle. Enrolling a Device. To enroll a device means to link a device to the controller, eg , enrol l a wired contact, enroll a wireless sensor, etc When asked to Delete using the OFF key, Use the Disar m button. - PowerPoint PPT Presentation
Citation preview
Accessing the Installer’s Menu
The entire cycle
Enrolling a Device
• To enroll a device means to link a device to the controller, eg, enroll a wired contact, enroll a wireless sensor, etc
• When asked to Delete using the OFF key,Use the Disarm button
• Once a device is enrolled, the controller can detect it.
• If you have enrolled the magnetic contacts, open the contacts and observe what is displayed on the LCD display, such as,
“ Back Door Open”
Observe this• After Enroll
How to delete
Observe this After Delete
Perform Diagnostic Test of Wireless Devices
Fail
PASS
10. Diagnostics WL Sensors Test
Front Door Z01 NOT-OK
Diag. Testing
Open door
Front Door Z01 STRONGOpen door
How to change Zone Type
How to change Zone Name
How to change Chime
3. Define Zone Zone no:
Z01: TYPE -- 2. Perimeter
Zone No : 0101
Done!
Z01: NAME -- Back door Done!
Z01: CHIME Chime OFF Done!
Z01: PARTITION Partition 1Done!
Enrol Proximity Tag
• Enrol Enrol Prog Tag <ok>• Tag No 1 <ok> Present Tag: Tag
No 1 <next>• To return clich “home” <ok> to exit
Define Control Panel
• Installer Mode <next>
• Define Panel <Ok>
• Entry Delay 1
Observation
After Enroll After Delete
How to stop alarm
Panel Buttons
What different Arm means
How to Arm Away
How to Arm Home
From Installer Manual
Basic
Warning !