Ver 10.09.28

A & B SEALS PTY. LTD. ABN 81 068 661 469

3 WELCH ST

UNDERWOOD QLD 4119

Ph 07 3341 1200

Fax 07 3341 9399

Email sales@abseals.com.au

SEAL FACILITATORS

Product Summary

Ver 10.09.28

A & B Seals P/L is Queensland’s premier supplier of high quality O-Rings.

We stock a huge range of imperial O-Rings to AS568A and

BS1806 - in a variety of materials - from American

manufacturers. These materials include:-

o Nitrile 70 Duro (N7) – best combination of oil

resistance and physical properties for hydraulics,

cold water applications

o Nitrile 90 Duro (N9) – harder than N7, better for

fittings and high extrusion risk application

o Black Viton 75 Duro (V7) – FKM. High

temperature, wide range (not universal) chemical

resistance, fuel, diesel and thinners resistant

o Black Viton 90 Duro (V9) – harder than V7, better

for fittings and high extrusion risk applications

o Brown Viton 75 Duro (VB) – FPM. High

temperature, wide range (not universal) chemical

resistance, fuel, diesel and thinners resistant.

o EPDM 80 Duro (E8) – Ethylene Propylene. Brake

fluid resistant, excellent for hot water and steam to

130°C

o Neoprene 70 Duro (C7) – Chloroprene. Used with

older refrigerants and with Ammonia. Excellent

ozone and weather resistance.

o Silicone 70 Duro (S7) – MVQ. Usually rust colored. Normally food grade. Low tear and abrasion

resistance, low tensile strength. Excellent temperature range - -59° to + 230° C. Excellent ozone and

weather resistance.

o Fluorosilicone 70 Duro (F7) – Sky blue in color. Excellent cryogenic properties - -73° to +177° C. Current

requirement for fuel pumps and aviation fuel under many Standards

o Polyurethane 90 Duro (P9) – Excellent wear resistance and tensile strength, low flexibility. Often used in

portapower and similar high pressure applications, or as gland cap O-Rings.

o HNBR (HN7) – Hydrogenated Nitrile. Used in R134a refrigerant. Oil resistant and can be used in hydraulic

systems to 150° C.

o Solid PTFE (TF) – Poor elastic properties but almost universal chemical compatibility and temperature

range from -200° to +260° C. Used where friction is a major concern. Commonly seen in valve seats.

o ‘Teflon’ Encapsulated (FEP, FEP-S7) – These have a Viton or Silicone core encapsulated in a fluorinated

Ethylene Propylene copolymer. This reduces the flexibility (while retaining some elasticity), but due to the

low permeability of the coating, increases chemical resistance. The coating also greatly reduces the slip-

stick friction of the O-Ring, making it ideal for use in valves.

o Aflas® 75 Duro (AF) – Excellent chemical compatibility and temperature range(-4° to +232° C)

o Kalrez® / Perfluoroelastomer – This is a separate class of compounds of varying properties – some of

which include:- resistance to explosive decompression, chemical resistance similar to that of PTFE, and

temperature resistance to 305° C. O-Rings in this class need to be quoted on a job by job basis to ensure the

correct compound is supplied for the application.

All these O-Rings are of the highest quality. Cheaper O-Rings are available in bulk for light duty and water

applications, and are supplied under a different part code sequence.

We also carry metric O-Rings to suit German DIN and Japanese Industrial Standard (JIS B2401). These are

available in N7 and V7 as standard. Some sizes may be available in N9 and S7, particularly in the JIS Range.

Ver 10.09.28

Many O-Rings and O-Ring Assortments are available as Grab Kits. Brochures on the available kits are available on

request.

Backup Rings are available for BS range O-

Rings in Contoured Rubber (Parbak)(BU),

Teflon (BU-T), or Hytrel (BU-H),

depending on size, Hytrel (MBU-H) and

Teflon (MBU-T) are available for JIS sizes.

Extruded cord is available for all cross

sections above 1.6mm as well as many

other thicknesses. This can be Vulcanized

or hot joined, using a multipart epoxy

adhesive which chemically joins the rubber

across the join.

Cross Section

Imperial Metric

Nominal Actual MM

0.039” 1.00

0.059” 1.50

0.063” 1.60

1/16" 0.070” 1.78 BS

0.074” 1.90 JIS

0.079” 2.00

0.094” 2.40 JIS

0.098” 2.50

3/32" 0.103” 2.62 BS

0.118” 3.00

0.122” 3.10 JIS

0.138” 3.50 JIS

1/8" 0.139” 3.53 BS

0.157” 4.00

0.197” 5.00

3/16" 0.210” 5.33 BS

0.224” 5.70 JIS

0.236” 6.00

1/4" 0.275” 6.99 BS

0.330” 8.40 JIS

Ver 10.09.28

DOUBLE ACTING PISTON SEALS STYLE MATERIAL SEAL PISTON

DP- Rubber/Fabric 1 pce Split

56- Rubber/Fabric 1 pce Split

N- Rubber/Fabric 1 pce Split

DPE- Rubber/Fabric + Acetal 3 pce Split

57- Rubber/Fabric + Acetal 3 pce Split

DPW- Rubber/Fabric + Acetal 3 pce Split

DPWL- Rubber/Fabric + Acetal 3 pce Split

58- Rubber/Fabric + Acetal 3 pce Split

NWR- Rubber/Fabric + Acetal 3 pce Split

L-DAWR Urethane + Acetal 3 pce Split

L-DAWRN Urethane + Acetal 3 pce Split

DSM- Rubber/Fabric + Acetal 5 pce Split

SPL- Rubber + Acetal 5 pce Solid

SPS- Rubber + Hytrel + Acetal 5 pce Solid

DAS- Rubber + Hytrel + Acetal 5 pce Solid

53- Rubber + Hytrel + Acetal 5 pce Solid

DS- Rubber + Acetal 3 pce Solid

Ver 10.09.28

STYLE MATERIAL SEAL PISTON

77- Rubber + Acetal 3 pce Solid

LS- Rubber + Hytrel 3 pce Solid

LSWR- Rubber + Hytrel + Acetal/Nylon 5 pce Solid

(with wear rings)

PDA- Dual Polyurethane 1 pce Solid

TP- Rubber + Urethane/Teflon/Nylon 3 pce Solid

TPWR- Rubber + Urethane/Teflon/Nylon 5 pce Solid

(with wear rings)

TRI- Rubber + Hytrel 3 pce Solid

TRI-W Rubber + Hytrel + Acetal 5 pce Solid

GP2 Filled Teflon + Rubber 2 pce Solid

GP6 Polyurethane/ester + Rubber 2 pce Solid

GP8 Split Nylon + Rubber 2 pce Solid

-p indicates for pneumatic

PHD- Filled Teflon + Acetal + Rubber 4 pce Solid

4 pce Solid

PHP Polyester/urethane, Acetal + Rubber

Ver 10.09.28

STYLE MATERIAL SEAL PISTON

770 Polyester + Rubber 2 pce Solid

PSP Polyurethane + Rubber 2 pce Solid

BPS Polyurethane 1 pce Solid

AQ Filled Teflon + Rubber 3 pce Solid

PZ- Rubber 1 pce Solid

Ver 10.09.28

SINGLE ACTING SEALS

STYLE MATERIAL TO SUIT

23- Polyurethane Rod 605- Polyurethane Rod R87- Polyurethane Rod RSL- Polyurethane Rod RU- Polyurethane Rod

620- Polyurethane + Rubber Rod

621- Polyurethane + Rubber +

Acetal Rod

RSLA- Polyurethane + Acetal Rod

TS- Polyurethane Rod

TSL- Polyurethane Rod 658- Polyurethane Rod

TSLA- Polyurethane Rod

PEI- Rubber / Fabric Rod CPI- Rubber / Fabric Rod

Ver 10.09.28

STYLE MATERIAL TO SUIT

14- Polyurethane Piston

RSE- Polyurethane Piston 606- Polyurethane Piston

659- Polyurethane Piston

52- Rubber / Fabric Piston (split piston)

JPS- Rubber + Nylon Piston

PEO- Rubber / Fabric Piston CPE- Rubber / Fabric Piston

RSEA- Polyurethane + Acetal Piston

PW- Rubber / Fabric + Acetal Piston

CPW- Rubber / Fabric + Acetal Piston

GP3- Filled Teflon + Rubber Piston

Ver 10.09.28

STYLE MATERIAL TO SUIT

15- Polyurethane Universal RSS- Polyurethane Universal 601- Polyurethane Universal SU- Polyurethane Universal

35- Polyurethane Universal

35- Polyurethane Universal L- Polyurethane (moly coated) Universal H- Polyurethane (moly coated) Universal

18- Rubber / Fabric Universal

P- Rubber / Fabric Universal

CP- Rubber / Fabric Universal

Ver 10.09.28

WIPER / DUST SEALS

U Polyurethane PWO- Rubber

Also D-

AN Polyurethane PWS- Rubber

Also 959, 940

NK- Rubber

UK- Polyurethane PWF- Polyurethane

VK- Viton (some rubber)

Also W-

H-N8 Rubber

H-P9 Polyurethane

H-V7 Viton SDK- Rubber

DH- Polyurethane

ASR- Rubber

RBP-

CSW- Nylon WTN- Filled Teflon

+ Rubber

PWB- Rubber S34- Bronze + Rubber

Ver 10.09.28

MCU- Polyurethane

MCR- Rubber

DWI- used as pin wiper

MCU- Polyurethane

MCR- Rubber

MMCU- Polyurethane

MMCR- Rubber

DKI- Polyurethane

DKB- Rubber

DKBI- Polyurethane

Ver 10.09.28

VEE SETS & COMPONENTS

-F Rubber & Fabric / Nylon Top / Female Adaptor

MF- Rubber & Fabric / Nylon Bottom / Male Adaptor

-VF Rubber & Fabric Vee Ring / Chevron

VV- Rubber & Fabric Vee Ring / Chevron

-VH Rubber Vee Ring / Chevron

-M Rubber & Fabric / Nylon Bottom / Male Adaptor

MM- Rubber & Fabric / Nylon Bottom / Male Adaptor

DR- Rubber/Fabric + Rubber Dri-Rod pack

DRM- Rubber/Fabric + Rubber Dri-Rod pack

some sizes have acetal top

VS- Generally of Rubber/Fabric. Vee set

MVS- Some sizes may have nylon adaptors, Vee set

Rubber or Polyurethane vees

SM1- Rubber +Rubber/Fabric + Acetal Selemaster

Ver 10.09.28

LIGHT DUTY U-CUPS

DI- Rubber Rod DIP- Polyurethane (soft) Rod DIM- Rubber Rod

DIMP- Polyurethane (soft) Rod

U- Rubber 85 duro Universal

MU- Rubber 70 duro Universal UM- Rubber 85 duro Universal

DE- Rubber Piston DEP- Polyurethane (soft) Piston DEM- Rubber Piston

DEMP- Polyurethane (soft) Piston

ROD SEAL / WIPERS COMBINATIONS

E8- Rubber + Acetal EU- Polyurethane

E9- Metal reinforced

Rubber

CUSHIONS

PP- Rubber

PPU- Polyurethane

(soft)

Ver 10.09.28

ROD RINGS & BUFFERS

GR1- Polyurethane Buffer

GR2- Filled PTFE & Rubber D A Seal GR4- Filled PTFE & Viton D A Seal SWC- Nylon + square Rubber Rotary

GR3- Filled PTFE & Rubber Buffer / S A Seal

GR5- Filled PTFE & Viton Buffer / S A Seal

HBY- Nylon + Acetal Buffer

653- Polyurethane + Acetal Buffer

SW- Polyurethane Rotary

Ver 10.09.28

ROTARY SHAFT SEALS

STYLE LIP

MATERIAL PRESSURE

RATING S-NBR SIMRIT BABSL NITRILE 10 BAR

S-NBR-D DICHTO HP SEAL NITRILE 10 BAR S-FPM SIMRIT BABSL VITON 10 BAR

S-FPM-D DICHTO HP SEAL VITON 10 BAR S-NBR-843 SIMRIT BAHD NITRILE 100 BAR

S-NBR-TCV NOK TCV NITRILE 3.5 BAR SI-TCV-N NOK TCV NITRILE 3.5 BAR SI-TCV-V NOK TCV VITON 3.5 BAR

S-NBR-TCN NOK TCN NITRILE 10 BAR SI-TCN-N NOK TCN NITRILE 10 BAR SI-TCN-V NOK TCN VITON 10 BAR

S-846 SIMRIT ATD NITRILE 30 BAR TEFLON FILM ON LIP

S-NBR-BSB VR RADIAL

LIPSEAL NITRILE 10 BAR

S-FPM-BSB VR RADIAL

LIPSEAL VITON 10 BAR

TC NITRILE 0.5 BAR TF VITON 0.5 BAR

ALL PRESSURE RATINGS ARE DEPENDANT ON SHAFT SURFACE SPEED

Ver 10.09.28

Good news! As of May 2008 A & B Seals will be stocking a wide range of mechanical seals. This high quality range has many parts interchangeable with the following well known international brands:-

- John Crane - James Walker - Burgmann - Roten - Aesseal - Pac-seal - Latty - Eagle - Sealol

Designs include PTFE, elastomer and metal

bellows designs, a wide range of face and body materials and in many cases can be tailored for specific environments. Seals for some pumps and mixers can be matched by model number so feel free to call us before stripping your machinery. Engineered and cartridge seals are also available for specialist applications.

To assist us in solving your problems we need to know the following information

- Shaft size - Set length - Face housing diameter - Media - Temperature - Shaft speed

Or if the original seal was satisfactory, give us a size or part number from any major competitive brand and we should be able to supply an equivalent.

Ver 10.09.28

At A & B Seals P/L we stock one of the largest ranges of aftermarket telescopic hoist seal kits in Australia. All parts are specially selected for optimum performance in telescopic cylinder applications, and are of the highest available quality. Depending on the brand seals may be available as individual items (marked ind), as sets to suit individual stages (marked stg), or as complete seal kits for the full cylinder (marked kit). Available brands include:-

Ace – stg

Altatec – kit, ind

Carrimore – kit, ind

Commercial - stg

Delta S2 – kit, stg, ind

Delta Delhoist – kit, ind

Di Natale Bertelli

Edbro SD - ind

Edbro LN – kit, ind

Edbro TS, DS, DE, RD – kit, ind

Edbro CS - kit

Hoist Hydraulics BL, BLT – kit, ind

HS Penta Serie Industriale - ind

HS Penta Serie Leggera - ind

Hyco – kit, ind

Hydrahoist – kit, ind

Hydrauto - ind

Hyva – kit, stg, ind

LM Series 5 & 7 – kit, ind

LM Series 8 – kit, ind

Mailhot – kit, ind

Mariz – kit

Neumeister - ind

Nuova Copma - ind

Roc – kit, stg, ind

Roc Low Profile LP – kit, ind

Samson – kit, ind

Telehoist FR series – kit, ind

Telehoist G series - ind

Many of these kits can be matched off model numbers or serial numbers from ID tags on the cylinders. If we do not have this information we need to know if

1. Number of extending stages 2. Is there a screw down gland cap

at the top of each stage? 3. Diameter of fixed outer tube 4. Where possible, the diameter of

largest extending stage. 5. In some cases we may need to

know all extending stage sizes but we will advise if this is necessary.

We can also identify and match kits off seal samples or housings in many cases

Ver 10.09.28

As well as our extensive range of seals - available individually to suit many common models of earthmoving equipment - we are also able to offer an expanding range of aftermarket seal kits of superior quality. At present this range includes:-

Caterpillar – models E110B, E180, E180B, E200B, EL200B, E240, E240B, EL240B, E300b, E320, E320B, E330

Daewoo – models S220LC/3, S220LC/5, S280LC, S280LC/3, S320LC, S330LC/3, S330LC/5, S360LC/3, S360LC/5

Halla – models HE220LC, HE280LC/D, HE280LC/H, HE360LC

Hitachi – Models EX60, EX120/1, EX120/2, EX150, EX200, EX200/2, EX200/3, EX200/5, EX200LC, EX220, EX220/2, EX220LC, EX300, EX300/2, EX300/3, EX400, UH07-7, UH10, UH10-7, UH14, UH14-2, UH045, UH045-7, UH063, UH081, UH121, UH123, UH143, UH171

Hyundai – models R210LC/3, R290LC/3, R360LC/3, R420LC, R450LC

Kato – models HD400SE-II, HD450SEV-II, HD550G, HD550SE-II, HD700SE, HD700SE-II, HD700SEV, HD720V-II, HD770SE, HD770SE-II, HD800V-II, HD880SE. HD880SE-II, HD880SEV,

HD900SEV, HD900SEV-II, HD1120SE, HD1220SE-II, HD1220SEV, HD1250SEV

Kobelco – models SK07, SK09, SK09-II, SK100, SK120, SK200-II, SK200-III

Komatsu – models GD300A, PC120-3, PC150-3, PC200-3, PC200-3A, PC200-5, PC220, PC220-2, PC220-3, PC220-5, PC300-2, PC300-3, PC300-5, PC400-3, PC400-5, WA100

Kubota – models KX41-2, KX71, KX91-3, KX121-2, KX121-3, R420, U35, U45, U45-3

Samsung – models MX222LC, MX292LC, SE210LC, SE280LC

Yanmar – models B50, B070, VI040, VI050-2

Many of these kits can be matched by the genuine repair kit number, or by the make model and cylinder i.e. boom lift, dipper arm or bucket crowd. Standard repair kits (including genuine) do not include gland bushings or glaciers bushes. In many cases these are available separately to suit.

Kits are also available for

Vickers® M3000, W30 & W40 cylinders

Parker® Hi-Load, 2A, 2H, 2AN cylinders

Alford® Blackline® (AR), Greenline® (GL & GS), PH & PS series

Nordon® GSN, HD, PH, NGA, NH series

PTE® Old series Streamline Agricultural and General Purpose (SAG & SGP), Blue Label (BLC), Red Label Phasing (RLP), New series Streamline Medium & Heavy Duty, Phasing and Heavy Phasing (SLM, SLH, SLP, SHP)

Baker Phasing and General purpose

Caterpillar

Case

Ver 10.09.28

We are pleased to recommend the following high performance lubricants. Molytec Silicone Lubricant is a hi-performance, translucent paste, which is non-toxic, and has an operating range of -50° to +200° C. Silicone Lubricant has very good water repellency, is oxidation resistant and has good adherence to dry surfaces. It is resistant to tracking and demonstrates very low volatility. This is an ideal assembly and operating lubricant for all oil resistant seals and O-Rings.

Available as 25g tube Moly-M897 $ 6.41 + gst 100g tube Moly-M813 $ 16.49 + gst 500g tub Moly-M814 $ 66.26 + gst 2kg tub Moly-M815 $ 243.08 + gst

Magnalube-G Teflon Based Grease is one of the best operating lubricants available in the marketplace. It constantly deposits a Teflon film on the contact surface surfaces which continually lubricates and protects against corrosion and wear. Magnalube-G is water resistant and will not migrate from hot surfaces. It is serviceable under load conditions to 7000 psi and is both mechanically and chemically stable. Operating range is from -40°to +290° C. 4 cc Blister Tube $ 4.83 + gst 21 g Tube $ 11.78 + gst 100 g Jar $ 10.92 + gst 250 g Jar / Tin $ 24.17 + gst 450 g Cartridge $ 38.24 + gst 500 g Tin $ 43.49 + gst 1 kg Tin $ 79.11 + gst 4 kg Tin $ 286.67 + gst

Ver 10.09.28

We are now a major stockist of KC Tools – high quality hand tools, workshop equipment and tool chests.

This comprehensive brand comprises several discrete ranges for specific markets and applications.

KC Tools Professional A large range of professional tools and toolkits of exceptional quality – comparable against the best of the competitors’ brands. This range carries a lifetime warranty against workmanship and materials.

KC Tools Specialty A wide range of specialty tools and equipment including pullers, engine and electrical tools, panel beating equipment. Features a 12 month warranty against workmanship and materials.

KC Tools Impacta High quality chrome molybdenum impact sockets, socket sets and accessories. Manufactured from high grade SCM440 chrome moly steel, and available in 3/8”, ½”, ¾”, 1” & 1 ½” drive, this is a great

range for professionals. Universal joints carry a 12 month warranty against workmanship and materials. Sockets and accessories have a lifetime warranty against workmanship and materials.

KC Tools Suntech A pneumatic tool range of high quality, tolerance matched components. All tools are factory tested and performance checked to ensure reliability and long service life. The Suntech range has a 24 month warranty against workmanship and materials.

KC ProAm A trade quality range of general tools, toolkits and tool chests, with a 12 month warranty against workmanship and materials.

KC ProAm Workmaster Features a wide range garage and workshop equipment and specialized tools, with a 6 month warranty against workmanship and materials.

A & B Seals is a registered ‘Tools For Your Trade’ Supplier and are able to customize tool kits and ranges to suit you specific needs.