Upload
federico-vega
View
215
Download
2
Embed Size (px)
Citation preview
Company name: -Created by: -Phone: -Fax: -Date: -
Printed from Grundfos CAPS [2013.04.030]
Position Count Description1 SL1.20.A25.30.2.61J
Product photo could vary from the actual product
Product No.: 96970713
Highly advanced pumps with many unique features.The Grundfos SL1 range with S-tube impeller are technologically advanced pumps designed forhandling wastewater, process water and unscreened raw sewage in heavy-duty municipal utilitiesand industrial applications. These heavy-duty pumps are built for years of trouble-free operation inthe most demanding applications.The pumps are for submerged installation, and are extremely reliable and very easy to service.The efficient S-tube impeller provides free passage of solids up 50 mm. This greatly reduces therisk of clogging and ensures maximum up-time and reduced operating costs.
Advanced technology inside outThe Grundfos SL1 pumps feature advanced technology inside out. In spite of their good looks,these highly efficient pumps are designed for years of trouble-free operation in the toughestenvironments. Easy to install and easy to service, the SL1 pumps ensure low long-term operatingcosts.
Watertight cable connectionPolyurethane-filled stainless steel cable connection, hermetically sealed. Ensures that liquidcannot penetrate through the cable into the motor.
Short rotor shaftCompact motor construction with short rotor shaft reduces vibrations. Increases efficiency andlifetime of shaft seal and ball bearings.
Double mechanical shaft sealEfficient single-unit cartridge shaft seal system ensures longer operating time and less down-time.Easy to replace in the field without use of special tools.
Replaceable wear ringEasy replaceable stainless steel wear ring on S-tube impeller and rubber seal ring in the pumphousing enable maintaining maximum pumping efficiency without replacing impeller.
ConstructionExtremely robust construction, with a smooth surface which prevents dirt and impurities fromsticking to the pump.
Stainless steel clampUnique stainless steel clamp assembling system enables quick and easy disassembly of pumpfrom motor unit. No tools required. Provides easy access for service and inspection.
Modular design
1/9
Company name: -Created by: -Phone: -Fax: -Date: -
Printed from Grundfos CAPS [2013.04.030]
Position Count DescriptionEach motor size fits several pump sizes with S-tube impeller hydraulics.
Operating conditionsThe Grundfos SL1 pumps are suitable for continuous submerged operation with a liquid level tothe top of the motor, or intermittent submerged operation with a liquid level to the middle of themotor.
Explosion-proof versionsFor applications involving a risk of explosion, or where otherwise required, explosion-proofversions of the Grundfos SL1 pumps are available.The SL1 pumps are in a II 2 G Ex cd IIB T4 (135°C) explosion protection classification accordingto EN standards 60079-0: 2006 / 60079-1: 2007 / 60079-18: 2004 / 61241-0: 2006 13463-1: 2001/ 13463-5: 2003.The pumps are also available with a Class 1 Zone 2, Exd IIB T4 (135°C) T4 (200°C) Gbclassification in accordance with the IEC 60079-15:1987.
ApprovalsThe SL1.50 pumps have been approved according to DIN 12050-2. The SL1.80 and SL1.100have been approved according to DIN 12050-1, for use in buildings services by the GermanBuilding Technology Institute.
Controls:Moisture sensor: without moisture sensorsWater-in-oil sensor: without water-in-oil sensor
Liquid:Pumped liquid: any viscous fluidMaximum liquid temperature: 40 °CDensity: 998.2 kg/m³
Technical:Type of impeller: Single ChannelMaximum particle size: 50 mmPrimary shaft seal: SIC/SICSecondary shaft seal: CARBON/CERAMICSApprovals on nameplate: CSACurve tolerance: ISO 9906:1999 Annex A
Materials:Pump housing: ASTM A48 CLASS25B
DIN W.-Nr. ASTM A 48 Class 25BImpeller: ASTM A48 CLASS40B
DIN W.-Nr. ASTM A 48 Class 40BMotor: ASTM A48 CLASS25B
DIN W.-Nr. ASTM A 48 Class 25B
Installation:Maximum ambient temperature: 40 °CFlange standard: ANSIPump inlet: 65Pump outlet: 65Maximum installation depth: 20 mFrame range: B
Electrical data:Number of poles: 2
2/9
Company name: -Created by: -Phone: -Fax: -Date: -
Printed from Grundfos CAPS [2013.04.030]
Position Count DescriptionPower input - P1: 2.9 kWRated power - P2: 2.2 kWMain frequency: 60 HzRated voltage: 3 x 208-230/460 VVoltage tolerance: +10/-10 %Start. method: star/deltaMax starts per. hour: 20Rated current: 9.4-8.3 ARated speed: 3480 rpmMotor efficiency at full load: 74.3 %Motor efficiency at 3/4 load: 72.8 %Motor efficiency at 1/2 load: 67.7 %Enclosure class (IEC 34-5): IP68Insulation class (IEC 85): HEx-protection standard: NLength of cable: 10 mCable type: SEOOW 600V
Others:Net weight: 86.6 kg
3/9
Company name: -Created by: -Phone: -Fax: -Date: -
Printed from Grundfos CAPS [2013.04.030]
96970713 SL1.20.A25.30.2.61J 60 Hz
H[m]
0
2
4
6
8
10
12
14
16
18
20
22
Q [l/s]0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
eta[%]
0
10
20
30
40
50
60
70
80
90
100
SL1.20.A25.30.2.61J, 60Hz
Q = 12.8 l/sH = 11.6 m
Eff pump = 70 %Eff pump & mtr = 51.8 %
P[kW]
0.0
0.5
1.0
1.5
2.0
2.5
3.0
NPSH[m]
0
5
10
15
20
25
30P1
P2
P1 = 2.81 kWP2 = 2.08 kWNPSH = 4.29 m
4/9
Company name: -Created by: -Phone: -Fax: -Date: -
Printed from Grundfos CAPS [2013.04.030]
H[m]
0
2
4
6
8
10
12
14
16
18
20
22
Q [l/s]0 2 4 6 8 10 12 14 16 18
eta[%]
0
10
20
30
40
50
60
70
80
90
100
SL1.20.A25.30.2.61J, 60Hz
Q = 12.8 l/sH = 11.6 m
Eff pump = 70 %Eff pump & mtr = 51.8 %
P[kW]
0
1
2
NPSH[m]
0
5
10
P1
P2
P1 = 2.81 kWP2 = 2.08 kWNPSH = 4.29 m
641
69
216
366
65
139.
7
419.1
65
321
171
139.
7
M16
4
160x
160
X
X
L3 T1 T2L1 L2 L3L1L2
1 3 6 2 7 8 9W2V2W2V1U1
5 4U2
(Not
use
d)
L2 L3 T1 T2
1 23 5 4 6 7 8 9U1 V1 W2U2 V2W2
L1
(Not
use
d)
L2 L3 T1 T2L1
(Not
use
d)
987W2
2V2
64U2V1
5W2
31U1
Yellow/green
2
18
39
76
4
5
Description ValueProduct name: SL1.20.A25.30.2.61JProduct Number: 96970713EAN number: 5700315048753
Technical:Actual calculated flow: 12.8 l/sMax flow: 19.4 l/sResulting head of the pump: 11.6 mHead max: 20.7 mType of impeller: Single ChannelMaximum particle size: 50 mmPrimary shaft seal: SIC/SICSecondary shaft seal: CARBON/CERAMICSApprovals on nameplate: CSACurve tolerance: ISO 9906:1999 Annex A
Materials:Pump housing: ASTM A48 CLASS25B
DIN W.-Nr. ASTM A 48 Class25B
Impeller: ASTM A48 CLASS40BDIN W.-Nr. ASTM A 48 Class40B
Motor: ASTM A48 CLASS25BDIN W.-Nr. ASTM A 48 Class25B
Installation:Maximum ambient temperature: 40 °CFlange standard: ANSIPump inlet: 65Pump outlet: 65Maximum installation depth: 20 mInst dry/wet: SubmergedInstallation: VerticalFrame range: B
Liquid:Pumped liquid: any viscous fluidMaximum liquid temperature: 40 °CDensity: 998.2 kg/m³
Electrical data:Number of poles: 2Power input - P1: 2.9 kWRated power - P2: 2.2 kWMain frequency: 60 HzRated voltage: 3 x 208-230/460 VVoltage tolerance: +10/-10 %Start. method: star/deltaMax starts per. hour: 20Rated current: 9.4-8.3 ARated speed: 3480 rpmMotor efficiency at full load: 74.3 %Motor efficiency at 3/4 load: 72.8 %Motor efficiency at 1/2 load: 67.7 %Enclosure class (IEC 34-5): IP68Insulation class (IEC 85): HEx-protection standard: NLength of cable: 10 mCable type: SEOOW 600V
Controls:Additional I/O: External
5/9
Company name: -Created by: -Phone: -Fax: -Date: -
Printed from Grundfos CAPS [2013.04.030]
Description ValueMoisture sensor: without moisture sensorsWater-in-oil sensor: without water-in-oil sensor
Others:Net weight: 86.6 kgSales region: USA
6/9
Company name: -Created by: -Phone: -Fax: -Date: -
Printed from Grundfos CAPS [2013.04.030]
Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.
96970713 SL1.20.A25.30.2.61J 60 Hz
641
69
216
366
65
139.7
4
19.1 65
321
171
139.7
M16
4
160x160
X
X
7/9
Company name: -Created by: -Phone: -Fax: -Date: -
Printed from Grundfos CAPS [2013.04.030]
Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.
96970713 SL1.20.A25.30.2.61J 60 Hz
363
513
740
97
1
266
1.5
4XM16
81
175
95210
140700
8/9
Company name: -Created by: -Phone: -Fax: -Date: -
Printed from Grundfos CAPS [2013.04.030]
Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.
96970713 SL1.20.A25.30.2.61J 60 Hz
339
130
325
65
771
491
270
18
9/9