Upload
a
View
176
Download
26
Tags:
Embed Size (px)
Citation preview
Title page
Alcatel-Lucent 1830
Photonic Service Switch 16/32 (PSS-16/PSS-32) | Release 8.1
Installation and System Turn-Up Guide
8DG-62717-HBAA-TJZZA
Issue 1 | October 2015
Legal notice
Legal notice
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright 2015 Alcatel-Lucent. All rights reserved.
Conformance statement
Interference Information: Part 15 of FCC Rules
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy. If the equipment is not installed and used in accordance with the guidelines in this document, the
equipment may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference,
in which case the user will be required to correct the interference at the expense of the user.
Security Statement
In rare instances, unauthorized individuals make connections to the telecommunications network through the use of remote access features. In such an event,
applicable tariffs require that the customer pay all network charges for traffic. Alcatel-Lucent cannot be responsible for such charges and will not make any
allowance or give any credit for charges that result from unauthorized access.
Limited Warranty
For terms and conditions of sale, contact your Alcatel-Lucent Account Team.
Contents
About this document
Purpose ......................................................................................................................................................................................... xliiixliii
What's new .................................................................................................................................................................................. xliiixliii
Intended audience ..................................................................................................................................................................... xliiixliii
How to use this document ..................................................................................................................................................... xlivxliv
Safety information .................................................................................................................................................................... xlivxliv
Federal Communications Commission (FCC) Part 15 Class A ............................................................................... xlivxliv
Packaging collection and recovery requirements .......................................................................................................... xlivxliv
Recycling/take-back/disposal of product and batteries ............................................................................................... xlivxliv
Conventions used ...................................................................................................................................................................... xlvixlvi
Related information ................................................................................................................................................................. xlvixlvi
Document support .................................................................................................................................................................... xlixxlix
Technical support ...................................................................................................................................................................... xlixxlix
How to order ............................................................................................................................................................................... xlixxlix
How to comment ....................................................................................................................................................................... xlixxlix
Part I: Safety information
1 Safety
Overview ...................................................................................................................................................................................... 1-11-1
General notes on safety
Overview ...................................................................................................................................................................................... 1-31-3
Structure of safety statements ............................................................................................................................................... 1-41-4
Basic safety aspects .................................................................................................................................................................. 1-71-7
....................................................................................................................................................................................................................................
Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
iii
Specific safety areas
Overview ................................................................................................................................................................................... 1-111-11
Potential sources of danger ................................................................................................................................................. 1-121-12
Laser safety ............................................................................................................................................................................... 1-131-13
Laser product classification ................................................................................................................................................ 1-171-17
Equipment grounding ........................................................................................................................................................... 1-231-23
Electrostatic discharge .......................................................................................................................................................... 1-241-24
Safety requirements in specific deployment phases
Overview ................................................................................................................................................................................... 1-291-29
Transportation .......................................................................................................................................................................... 1-301-30
Storage ........................................................................................................................................................................................ 1-341-34
Installation ................................................................................................................................................................................. 1-381-38
Taking into operation ............................................................................................................................................................ 1-441-44
Operation and maintenance ................................................................................................................................................ 1-471-47
Taking out of operation ........................................................................................................................................................ 1-531-53
Event of failure ........................................................................................................................................................................ 1-561-56
Part II: Alcatel-Lucent 1830 PSS-16 physical and power installation
2 Equipment installation (Alcatel-Lucent 1830 PSS-16)
Overview ...................................................................................................................................................................................... 2-12-1
Installation options/requirements ........................................................................................................................................ 2-22-2
Subrack installation in an EIA bay frame ........................................................................................................................ 2-42-4
Subrack installation in an ANSI bay frame ................................................................................................................... 2-102-10
Subrack installation in an ETSI rack ............................................................................................................................... 2-162-16
Additional hardware installation (SFD, DCM, fiber storage tray etc.) ............................................................... 2-222-22
3 Cable, fan unit, air filter, and user panel installation for Alcatel-Lucent 1830 PSS-16
Overview ...................................................................................................................................................................................... 3-13-1
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
iv Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
Subrack grounding ................................................................................................................................................................... 3-33-3
Subrack ID setting .................................................................................................................................................................... 3-73-7
Fan unit and air filter installation ..................................................................................................................................... 3-103-10
Alcatel-Lucent 1830 PSS-16 user panel installation and connections ................................................................ 3-153-15
Connecting power cables ..................................................................................................................................................... 3-313-31
Verify battery A/B assignments ......................................................................................................................................... 3-533-53
4 Circuit pack and fiber installation for Alcatel-Lucent 1830 PSS-16
Overview ...................................................................................................................................................................................... 4-14-1
General circuit pack guidelines ........................................................................................................................................... 4-24-2
Precautions .................................................................................................................................................................................. 4-34-3
Circuit pack installation guidelines .................................................................................................................................... 4-44-4
Non-amplifier circuit pack installation ............................................................................................................................. 4-94-9
Optical amplifier installation .............................................................................................................................................. 4-174-17
DCM installation .................................................................................................................................................................... 4-264-26
Inventory cable Installation ................................................................................................................................................ 4-274-27
Subrack to subrack cable installation .............................................................................................................................. 4-304-30
Electrical SFP applications ................................................................................................................................................. 4-344-34
Outside plant and customer equipment fiber connections ....................................................................................... 4-374-37
Test for fiber parameter compliance ................................................................................................................................ 4-404-40
Intra-NE fiber connections .................................................................................................................................................. 4-504-50
Part III: Alcatel-Lucent 1830 PSS-32 physical and power installation
5 Equipment installation (Alcatel-Lucent 1830 PSS-32)
Overview ...................................................................................................................................................................................... 5-15-1
Installation options/requirements ........................................................................................................................................ 5-25-2
Subrack and flex shelf installation in an EIA bay frame ............................................................................................ 5-45-4
SFD, MSH8-FSM, fiber storage tray, and DCM shelf installation in an EIA bay frame with or
without flex shelf ............................................................................................................................................................ 5-255-25
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
v
Subrack and flex shelf Installation in an ANSI bay frame ...................................................................................... 5-365-36
SFD, MSH8-FSM, fiber storage tray, and DCM shelf installation in an ANSI bay frame with or
without flex shelf ............................................................................................................................................................ 5-575-57
Subrack and equipment installation in an ETSI rack ................................................................................................ 5-715-71
6 Cable, fan unit, air filter and user panel installation (Alcatel-Lucent 1830 PSS-32)
Overview ...................................................................................................................................................................................... 6-16-1
Subrack grounding ................................................................................................................................................................... 6-26-2
Subrack ID setting .................................................................................................................................................................... 6-56-5
Alcatel-Lucent 1830 PSS-32 fan unit and air filter installation and replacement ............................................. 6-86-8
Alcatel-Lucent 1830 PSS-32 user panel connections ............................................................................................... 6-166-16
Connecting power cables ..................................................................................................................................................... 6-356-35
Verify battery A/B power assignments ........................................................................................................................... 6-566-56
Cable installations for SFD40 and SFD40B ................................................................................................................. 6-586-58
Power connections for SFD40/SFD40B ........................................................................................................................ 6-636-63
7 Circuit pack and fiber installation for Alcatel-Lucent 1830 PSS-32
Overview ...................................................................................................................................................................................... 7-17-1
General circuit pack guidelines ........................................................................................................................................... 7-27-2
Precautions .................................................................................................................................................................................. 7-37-3
Circuit pack installation guidelines .................................................................................................................................... 7-47-4
Non-amplifier circuit pack installation ............................................................................................................................. 7-97-9
Optical amplifier installation .............................................................................................................................................. 7-187-18
DCM installation .................................................................................................................................................................... 7-277-27
Inventory cable installation ................................................................................................................................................. 7-337-33
Subrack to subrack cable installation .............................................................................................................................. 7-377-37
Electrical SFP applications ................................................................................................................................................. 7-427-42
Outside plant and customer equipment fiber connections ....................................................................................... 7-447-44
Test for fiber parameter compliance ................................................................................................................................ 7-477-47
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
vi Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
Intra-NE fiber connections .................................................................................................................................................. 7-577-57
Part IV: Alcatel-Lucent 1830 PSS-32 integrated bay
8 Equipment installation (Alcatel-Lucent 1830 PSS-32 integrated bay)
Overview ...................................................................................................................................................................................... 8-18-1
Installation options/requirements ........................................................................................................................................ 8-28-2
9 Alcatel-Lucent 1830 PSS-32 integrated bay power cables
Overview ...................................................................................................................................................................................... 9-19-1
Power distribution ..................................................................................................................................................................... 9-29-2
Integrated bay external battery to PDU wiring procedure ......................................................................................... 9-59-5
10 Optional equipment installation
Overview ................................................................................................................................................................................... 10-110-1
Mouting of optional equipment ......................................................................................................................................... 10-210-2
Fiber storage tray (FST) and MSH8-FSM installation in a flex shelf ................................................................. 10-410-4
Stile strip and cover installation ........................................................................................................................................ 10-710-7
End guard installation ......................................................................................................................................................... 10-1310-13
Bay spacer (duct expander) kit installation ................................................................................................................ 10-1610-16
Part V: Stand-alone installation testing
11 Stand-alone node set-up
Overview ................................................................................................................................................................................... 11-111-1
Verify installation and seat packs ..................................................................................................................................... 11-311-3
Connect to the NE and prepare the NE for software installation .......................................................................... 11-611-6
Connect to the NE for CLI access .................................................................................................................................. 11-1111-11
Configure the software environment and load, and commit the software ....................................................... 11-1411-14
Set the NE to operate in SDH mode .............................................................................................................................. 11-2611-26
Set the loopback IP address .............................................................................................................................................. 11-2811-28
Set the OCS IP address for establishing OCS compound interconnection ..................................................... 11-3211-32
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
vii
Configure GNE for management system access ...................................................................................................... 11-4111-41
Complete connection of inventory cables ................................................................................................................... 11-4511-45
Change an NE from a nonredundant to a redundant Equipment Controller (EC) configuration ............ 11-5111-51
Perform a database backup ............................................................................................................................................... 11-5411-54
Change an NE from a redundant to a nonredundant Equipment Controller (EC) configuration ............ 11-5511-55
Insert duplicate equipment controller ........................................................................................................................... 11-5811-58
Add peer subracks ................................................................................................................................................................ 11-6011-60
Set the network element date and time ......................................................................................................................... 11-6111-61
Configure MTU size on OSC and NETIF (GCC) interface ................................................................................. 11-6511-65
Disable ES port monitoring .............................................................................................................................................. 11-7111-71
Update firmware on all circuit packs ............................................................................................................................ 11-7411-74
Configure additional system properties ....................................................................................................................... 11-7711-77
Example configuration of FTP server ........................................................................................................................... 11-8011-80
12 Stand-alone installation testing
Overview ................................................................................................................................................................................... 12-112-1
Verify shelf and circuit pack discovery .......................................................................................................................... 12-212-2
Verify system provisioning ................................................................................................................................................. 12-512-5
Equipment controller protection switching ................................................................................................................... 12-812-8
Local and span tests ............................................................................................................................................................ 12-1212-12
Connect outside plant fiber .............................................................................................................................................. 12-2212-22
Part VI: System turn-up and testing
13 Connecting adjacent network elements
Overview ................................................................................................................................................................................... 13-113-1
Network commissioning background ............................................................................................................................. 13-313-3
Commissioning workflows ................................................................................................................................................. 13-713-7
Preconditioning procedure ................................................................................................................................................ 13-2113-21
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
viii Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
Establish connection to the network ............................................................................................................................. 13-2313-23
Provision the system ........................................................................................................................................................... 13-3213-32
Execute the commission greenfield system wizard ................................................................................................. 13-4113-41
Commissioning steps required for system with external Raman amplifier modules .................................. 13-5313-53
Complete commissioning on a TOADM/ROADM linear system ..................................................................... 13-6313-63
Commission a FOADM system ...................................................................................................................................... 13-7113-71
Complete commissioning on a mixed TOADM/ROADM/FOADM system ................................................. 13-9113-91
Commission a system with unkeyed FOADM lines ............................................................................................. 13-11213-112
Prepare unkeyed FOADM system for additional services ................................................................................. 13-12413-124
Disconnect PC from the Network ............................................................................................................................... 13-12913-129
Understanding the loss report ....................................................................................................................................... 13-13113-131
Generate and review system loss report .................................................................................................................... 13-14013-140
Troubleshooting failed adjustments ............................................................................................................................ 13-14813-148
14 Circuit connections
Overview ................................................................................................................................................................................... 14-114-1
System behavior during service turn-up ........................................................................................................................ 14-214-2
Provision new wavelength service ................................................................................................................................... 14-714-7
Proper insertion of a CFP into 112SCA1 and 112SNA1 100GA/D OTs ........................................................ 14-1914-19
Perform power adjustments .............................................................................................................................................. 14-2614-26
Delete wavelength service ................................................................................................................................................ 14-3914-39
Provision Alcatel-Lucent 1830 PSS for transport over the 1696 ROADM .................................................... 14-4314-43
Provision transponder for connection to an unmanaged network element ..................................................... 14-5214-52
15 Performance verification testing and data retrieval
Overview ................................................................................................................................................................................... 15-115-1
Perform database backups ................................................................................................................................................... 15-215-2
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
ix
A Additional service information
Overview .....................................................................................................................................................................................A-1A-1
General
Overview .....................................................................................................................................................................................A-3A-3
Preface .........................................................................................................................................................................................A-4A-4
Fiber inspection equipment ..................................................................................................................................................A-5A-5
The Inspect, Clean, Inspect, Connect process (ICIC) process ................................................................................A-8A-8
Fiber optic inspection
Overview .....................................................................................................................................................................................A-9A-9
Fiber inspection application setup ...................................................................................................................................A-10A-10
Fiber or bulkhead inspection setup .................................................................................................................................A-12A-12
Transceiver inspection setup .............................................................................................................................................A-16A-16
Inspect and test .......................................................................................................................................................................A-20A-20
Fiber optic cleaning
Overview ..................................................................................................................................................................................A-24A-24
Fiber optics cleaning best practices ................................................................................................................................A-25A-25
Cleaning material examples ..............................................................................................................................................A-26A-26
Recommended cleaning methods ....................................................................................................................................A-29A-29
Cleaning optical fiber connectors ....................................................................................................................................A-30A-30
Cleaning optical ports ..........................................................................................................................................................A-36A-36
Determine Insertion Loss of Cable
Overview ..................................................................................................................................................................................A-39A-39
Methods to determine insertion loss ...............................................................................................................................A-40A-40
Determine insertion loss test equipment .......................................................................................................................A-41A-41
Optical component estimated loss ...................................................................................................................................A-44A-44
Test setup using 1 reference cable ...................................................................................................................................A-45A-45
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
x Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
Test setup using 2 reference cables .................................................................................................................................A-47A-47
Insertion loss measurement ...............................................................................................................................................A-49A-49
Insertion loss testing references .......................................................................................................................................A-51A-51
Troubleshooting fiber optics
Overview ..................................................................................................................................................................................A-52A-52
Tracing Faults .........................................................................................................................................................................A-53A-53
Contamination examples ....................................................................................................................................................A-56A-56
Fiber inspection specifications and requirements
Overview ..................................................................................................................................................................................A-61A-61
Inspection probe requirements .........................................................................................................................................A-62A-62
Fiber inspection criteria ......................................................................................................................................................A-63A-63
Fiber optics standards for inspection and cleaning ...................................................................................................A-65A-65
B Tightening torque
Overview .....................................................................................................................................................................................B-1B-1
Nominal tightening torques ..................................................................................................................................................B-2B-2
C Wavelength tracker only to WTOCM/WTOCMA-equipped network upgrade procedure
Overview .....................................................................................................................................................................................C-1C-1
Identification of need for upgrade ...................................................................................................................................... C-3C-3
Phase I: Generate new commissioning files from EPT ..............................................................................................C-6C-6
Phase II: Physical installation of WTOCM/WTOCMA packs ................................................................................C-9C-9
Phase III: Setting of ILAWT decoder usage type .....................................................................................................C-15C-15
Phase IV: Disable automatic tilt adjustments in network ........................................................................................C-17C-17
Phase V: Setting of OADM lines WT decoder usage type .....................................................................................C-20C-20
Phase VI: Provisioning of SCOT attributes .................................................................................................................C-25C-25
Phase VII: Enabling of automatic tilt adjustment by SCOT ..................................................................................C-28C-28
Phase VIII: Review ...............................................................................................................................................................C-33C-33
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
xi
Upgrade of ILA nodes to WTOCM/WTOCMA ........................................................................................................C-34C-34
Switch of ILA to WTOCM/WTOCMAmonitoring ..................................................................................................C-41C-41
Advanced topics .....................................................................................................................................................................C-42C-42
D Replacing an in-service WTOCM pack with a WTOCMA pack
Overview .....................................................................................................................................................................................D-1D-1
Phase I: Disable SCOT tilt adjustments ..........................................................................................................................D-3D-3
Phase II: Change WT usage type to internal ..................................................................................................................D-7D-7
Phase III: Deprovision existing WTOCM pack ............................................................................................................D-9D-9
Phase IV: Provision new WTOCMA pack ...................................................................................................................D-12D-12
Phase V: Change WT usage type to wtocm .................................................................................................................D-16D-16
Phase VI: Re-enable SCOT tilt adjustment .................................................................................................................D-18D-18
E Alcatel-Lucent 1621 link extender applications
Overview ..................................................................................................................................................................................... E-1E-1
Integration of Alcatel-Lucent 1621 link extender with Alcatel-Lucent 1830 PSS ........................................... E-2E-2
F Optical modules replacement
Overview ..................................................................................................................................................................................... F-1F-1
Special tools ................................................................................................................................................................................ F-2F-2
XFP adapter insertion/extraction ........................................................................................................................................ F-3F-3
XFP module insertion ............................................................................................................................................................. F-5F-5
XFP module extraction ........................................................................................................................................................... F-6F-6
Replacing LC-type LBO ........................................................................................................................................................ F-7F-7
SFP module insertion .............................................................................................................................................................. F-8F-8
SFP module extraction ............................................................................................................................................................ F-9F-9
G OTDR measurement examples
Overview .....................................................................................................................................................................................G-1G-1
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
xii Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
Examples of OTDR measurements ...................................................................................................................................G-2G-2
Glossary
Index
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
xiii
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
xiv Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
List of tables
1 Information products related to Alcatel-Lucent 1830 PSS ....................................................................... xlvixlvi
1-1 FDA/CDRH laser classifications ....................................................................................................................... 1-181-18
1-2 OFCS hazard levels ................................................................................................................................................ 1-181-18
1-3 Temperature and humidity levels for transportation (ETSI market) .................................................... 1-311-31
1-4 Environmental conditions for transportation (ANSI market) ................................................................. 1-321-32
1-5 Temperature and humidity levels for storage (ETSI market) .................................................................. 1-351-35
1-6 Environmental conditions for storage (ANSI market) .............................................................................. 1-371-37
3-1 Ground lug selection ................................................................................................................................................ 3-43-4
3-2 Subrack ID settings ................................................................................................................................................... 3-83-8
3-3 Rack lamp connector pin-out .............................................................................................................................. 3-173-17
3-4 Rack alarm connector pin-out ............................................................................................................................ 3-193-19
3-5 Housekeeping connector pin-outs ..................................................................................................................... 3-223-22
3-6 PC com port settings for craft use ..................................................................................................................... 3-303-30
3-7 Customer provided power cable selection guide ......................................................................................... 3-313-31
3-8 Power cable color code ......................................................................................................................................... 3-333-33
3-9 Continuity check ...................................................................................................................................................... 3-463-46
3-10 Voltage check ............................................................................................................................................................ 3-473-47
4-1 Inventory cable connector pin-out .................................................................................................................... 4-274-27
4-2 LAN connector pin-out ......................................................................................................................................... 4-304-30
4-3 Event loss parameters ............................................................................................................................................ 4-414-41
4-4 Fiber type indices .................................................................................................................................................... 4-444-44
4-5 ET span parameters ................................................................................................................................................ 4-454-45
4-6 ER span parameters ................................................................................................................................................ 4-464-46
....................................................................................................................................................................................................................................
Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
xv
4-7 WT span parameters ............................................................................................................................................... 4-474-47
4-8 WR span parameters .............................................................................................................................................. 4-484-48
4-9 Minimum LC fiber jumper requirements ....................................................................................................... 4-504-50
4-10 Minimum MPO angled/flexible boot fiber jumper requirements .......................................................... 4-514-51
4-11 Fiber capacities ........................................................................................................................................................ 4-564-56
5-1 SFD40/40B mounting brackets .......................................................................................................................... 5-325-32
5-2 SFD40/40B mounting brackets .......................................................................................................................... 5-665-66
5-3 SFD40/40B mounting brackets .......................................................................................................................... 5-955-95
6-1 Ground lug selection ................................................................................................................................................ 6-36-3
6-2 Subrack ID settings ................................................................................................................................................... 6-66-6
6-3 Rack lamp connector pin-out .............................................................................................................................. 6-196-19
6-4 Rack alarm connector pin-out ............................................................................................................................ 6-216-21
6-5 Housekeeping connector pin-outs ..................................................................................................................... 6-246-24
6-6 DB9 craft cable pinout .......................................................................................................................................... 6-336-33
6-7 PC com port settings for craft use ..................................................................................................................... 6-346-34
6-8 Power cable selection guide ................................................................................................................................ 6-356-35
6-9 Power cable color code ......................................................................................................................................... 6-416-41
6-10 Branch circuit size for 1 subrack per rack ...................................................................................................... 6-426-42
6-11 Branch circuit size for 2 subracks per rack .................................................................................................... 6-426-42
6-12 Branch circuit size for 3 subracks per rack .................................................................................................... 6-426-42
6-13 Continuity check ...................................................................................................................................................... 6-526-52
6-14 Voltage check ............................................................................................................................................................ 6-536-53
6-15 SFD40/SFD40B HK (alarm) cable RJ45 connection ................................................................................ 6-596-59
6-16 SFD40/SFD40B alarm cable to HK cable connections ............................................................................ 6-596-59
6-17 Power cable pin designations and color code ............................................................................................... 6-636-63
6-18 SFD40/SFD40B power cable continuity check ........................................................................................... 6-636-63
6-19 SFD40SFD40B power cable voltage check .................................................................................................. 6-646-64
List of tables
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
xvi Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
7-1 Inventory cable connector pin-out .................................................................................................................... 7-337-33
7-2 LAN connector pin-out ......................................................................................................................................... 7-377-37
7-3 Event loss parameters ............................................................................................................................................ 7-487-48
7-4 Fiber type indices .................................................................................................................................................... 7-517-51
7-5 ET span parameters ................................................................................................................................................ 7-527-52
7-6 ER span parameters ................................................................................................................................................ 7-537-53
7-7 WT span parameters ............................................................................................................................................... 7-547-54
7-8 WR span parameters .............................................................................................................................................. 7-557-55
7-9 Minimum LC fiber jumper requirements ....................................................................................................... 7-577-57
7-10 Minimum MPO angled/flexible boot fiber jumper requirements .......................................................... 7-587-58
7-11 Fiber capacities ........................................................................................................................................................ 7-647-64
8-1 Mounting recommendations .................................................................................................................................. 8-28-2
11-1 Database backup and restore parameters ..................................................................................................... 11-5411-54
13-1 Loss report terms and definitions ................................................................................................................. 13-13313-133
13-2 Loss value field terms and definitions ........................................................................................................ 13-13413-134
13-3 Notes field terms and definitions .................................................................................................................. 13-13513-135
13-4 Loss report highlighting ................................................................................................................................... 13-13813-138
13-5 Minimum EPT parameters for network element .................................................................................... 13-14013-140
13-6 Loss report fields ................................................................................................................................................ 13-14513-145
13-7 Loss report error messages ............................................................................................................................. 13-14813-148
A-1 Contents of ITE-7511A .......................................................................................................................................... A-6A-6
A-2 Contents of ITE-7511B .......................................................................................................................................... A-6A-6
A-3 Optional items ............................................................................................................................................................ A-7A-7
A-4 Standard patch cord tips ...................................................................................................................................... A-12A-12
A-5 Standard bulkhead tips ......................................................................................................................................... A-12A-12
A-6 Angled multi-fiber array tip ............................................................................................................................... A-13A-13
A-7 Port type reference ................................................................................................................................................. A-18A-18
List of tables
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
xvii
A-8 Material examples .................................................................................................................................................. A-26A-26
A-9 Methods for cleaning optical fiber connector .............................................................................................. A-29A-29
A-10 Methods for cleaning optical ports .................................................................................................................. A-29A-29
A-11 Test methods ............................................................................................................................................................ A-40A-40
A-12 Optical light sources ............................................................................................................................................. A-41A-41
A-13 Optical power meters ............................................................................................................................................ A-42A-42
A-14 Jumper kits ............................................................................................................................................................... A-42A-42
A-15 Optical component estimated loss ................................................................................................................... A-44A-44
A-16 Contamination examples ..................................................................................................................................... A-56A-56
A-17 Visual requirements for PC polished connectors, single mode fibre (SM), RL 245 dB ......... A-63A-63
A-18 Visual requirements for PC polished connectors, multimode fibres (MM) ...................................... A-64A-64
B-1 Nominal tightening torques ................................................................................................................................... B-2B-2
B-2 Nominal tightening torques when using washers ......................................................................................... B-2B-2
F-1 Special tools ................................................................................................................................................................ F-2F-2
List of tables
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
xviii Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
List of figures
1-1 Symbols defined for safety instructions ............................................................................................................ 1-51-5
1-2 Multilabel (1830 PSS-16/PSS-32) .................................................................................................................... 1-131-13
1-3 ESD bonding point at the Alcatel-Lucent 1830 PSS-16 subrack .......................................................... 1-261-26
1-4 ESD bonding point at the Alcatel-Lucent 1830 PSS-32 subrack .......................................................... 1-271-27
1-5 ESD bonding point at the ETSI One Rack .................................................................................................... 1-281-28
1-6 Temperature and humidity levels for storage (ETSI market) .................................................................. 1-361-36
2-1 Airflow diagram ......................................................................................................................................................... 2-32-3
2-2 EIA subrack mounting bracket position ............................................................................................................ 2-42-4
2-3 Cover brackets installed for EIA applications ................................................................................................. 2-52-5
2-4 Subrack installed in EIA bay frame .................................................................................................................... 2-62-6
2-5 Align slots in cover with hinge pins ................................................................................................................... 2-72-7
2-6 Latch alignment .......................................................................................................................................................... 2-72-7
2-7 Z25 Extended cover .................................................................................................................................................. 2-82-8
2-8 Alcatel-Lucent 1830 PSS-16 subrack with baffle mounted in an EIA rack ......................................... 2-92-9
2-9 ANSI subrack mounting bracket position ...................................................................................................... 2-112-11
2-10 Cover brackets installed for ANSI applications ........................................................................................... 2-122-12
2-11 Subrack installed in ANSI bay frame .............................................................................................................. 2-132-13
2-12 Align slots in cover with hinge pins ................................................................................................................. 2-142-14
2-13 Latch alignment ....................................................................................................................................................... 2-142-14
2-14 Alcatel-Lucent 1830 PSS-16 subrack with baffle mounted in an ANSI rack ................................... 2-152-15
2-15 Optinex ETSI rack cable tie down bar removal ........................................................................................... 2-162-16
2-16 ETSI subrack mounting bracket position ....................................................................................................... 2-172-17
2-17 Cover brackets installed for ETSI applications ............................................................................................ 2-182-18
....................................................................................................................................................................................................................................
Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
xix
2-18 Subrack installed in ETSI bay frame ............................................................................................................... 2-192-19
2-19 Align slots in cover with hinge pins ................................................................................................................. 2-202-20
2-20 Latch alignment ....................................................................................................................................................... 2-202-20
2-21 Alcatel-Lucent 1830 PSS-16 subrack with baffle mounted in an ETSI rack .................................... 2-212-21
3-1 Subrack ground attachment point ........................................................................................................................ 3-53-5
3-2 Subrack ID rotating switches ................................................................................................................................ 3-83-8
3-3 Fan unit slots ............................................................................................................................................................. 3-103-10
3-4 Correct fan unit alignment ................................................................................................................................... 3-113-11
3-5 Fan unit fully seated into subrack ..................................................................................................................... 3-113-11
3-6 Air filter cover .......................................................................................................................................................... 3-123-12
3-7 Filter installation ...................................................................................................................................................... 3-133-13
3-8 Filter fully installed ................................................................................................................................................ 3-133-13
3-9 Air filter removal ..................................................................................................................................................... 3-143-14
3-10 User panel installed into subrack ....................................................................................................................... 3-153-15
3-11 User panel connectors detail ............................................................................................................................... 3-153-15
3-12 Punch down block step 1 ...................................................................................................................................... 3-233-23
3-13 Punch down block step 2 ...................................................................................................................................... 3-233-23
3-14 Punch down block step 3 ...................................................................................................................................... 3-243-24
3-15 Punch down block Step 4 ..................................................................................................................................... 3-253-25
3-16 Punch down block Step 5 ..................................................................................................................................... 3-253-25
3-17 Smart cEDD mounting .......................................................................................................................................... 3-263-26
3-18 Three cEDD mounting brackets ........................................................................................................................ 3-273-27
3-19 PSC1-6 ........................................................................................................................................................................ 3-283-28
3-20 PSC1-6 mounting bracket configurations ...................................................................................................... 3-283-28
3-21 PSC1-6 cover mounting ........................................................................................................................................ 3-293-29
3-22 Power cable locations ............................................................................................................................................ 3-333-33
3-23 Mark cables for insulation stripping ................................................................................................................ 3-343-34
List of figures
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
xx Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
3-24 Cables being inserted into H Tap ....................................................................................................................... 3-343-34
3-25 Crimp H tap ............................................................................................................................................................... 3-353-35
3-26 Properly crimped H tap ......................................................................................................................................... 3-353-35
3-27 Protective cover ....................................................................................................................................................... 3-363-36
3-28 Secure protective cover ......................................................................................................................................... 3-363-36
3-29 Example of H tap in an overhead rack ............................................................................................................ 3-373-37
3-30 Strip cable insulation ............................................................................................................................................. 3-383-38
3-31 Setting crimper ......................................................................................................................................................... 3-393-39
3-32 Crimp lug onto wire ............................................................................................................................................... 3-403-40
3-33 Finished crimp .......................................................................................................................................................... 3-413-41
3-34 Power cable terminations ..................................................................................................................................... 3-413-41
3-35 Typical PDU wiring configuration ................................................................................................................... 3-423-42
3-36 PDU installed in ETSI rack ................................................................................................................................. 3-433-43
3-37 PDU installed in an ANSI rack .......................................................................................................................... 3-433-43
3-38 PDU installed in an EIA rack .............................................................................................................................. 3-433-43
3-39 Rear access PDU - front ....................................................................................................................................... 3-443-44
3-40 Rear access PDU - back ........................................................................................................................................ 3-443-44
3-41 PDU optional slider kit reference photos ....................................................................................................... 3-453-45
3-42 Power cable pin identification ............................................................................................................................ 3-463-46
3-43 Power filter locations ............................................................................................................................................. 3-483-48
3-44 Pre-forming power cables ANSI ................................................................................................................. 3-493-49
3-45 Pre-forming power cables ETSI .................................................................................................................. 3-503-50
3-46 Cables plugged into power filters ..................................................................................................................... 3-513-51
4-1 Latch positioning ....................................................................................................................................................... 4-54-5
4-2 Circuit pack insertion ............................................................................................................................................... 4-64-6
4-3 Clearing bottom extraction rail ............................................................................................................................. 4-64-6
4-4 Circuit pack insertion ............................................................................................................................................... 4-74-7
List of figures
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
xxi
4-5 Closed latches ............................................................................................................................................................. 4-84-8
4-6 Subrack with EC and PFDC installed ................................................................................................................ 4-94-9
4-7 Example of shelf report ......................................................................................................................................... 4-104-10
4-8 Half slot adapter ....................................................................................................................................................... 4-114-11
4-9 Half slot adapter tool .............................................................................................................................................. 4-124-12
4-10 Open upper latch ..................................................................................................................................................... 4-134-13
4-11 Insert half slot adapter tool into subrack ......................................................................................................... 4-134-13
4-12 Secure half slot adapter with Phillips screwdriver ...................................................................................... 4-144-14
4-13 Half slot adapter with rubber plug installed .................................................................................................. 4-154-15
4-14 Amplifiers and OSC connections in an ILA ................................................................................................. 4-194-19
4-15 Amplifier and OSC connections in TOADM ............................................................................................... 4-194-19
4-16 Amplifier and Raman Pump Connections ..................................................................................................... 4-204-20
4-17 Proper LD and Amplifier handling ................................................................................................................... 4-214-21
4-18 Parking cap removal ............................................................................................................................................... 4-224-22
4-19 SFP insertion ............................................................................................................................................................. 4-234-23
4-20 Fiber installation ...................................................................................................................................................... 4-244-24
4-21 Y inventory cable adapter .................................................................................................................................... 4-284-28
4-22 Internal connection diagram of Y adapter ...................................................................................................... 4-284-28
4-23 EC circuit pack ......................................................................................................................................................... 4-314-31
4-24 Location of EC packs in subrack ....................................................................................................................... 4-324-32
4-25 Alcatel-Lucent 1830 PSS-16 electrical SFP .................................................................................................. 4-344-34
4-26 Extended bracket position .................................................................................................................................... 4-354-35
4-27 LAN cable bend radius ......................................................................................................................................... 4-364-36
4-28 Event loss parameters ............................................................................................................................................ 4-414-41
4-29 OTDR testing setups (side, direction) ............................................................................................................. 4-424-42
4-30 OTDR with launch fiber ....................................................................................................................................... 4-444-44
4-31 Angled LC fiber boot ............................................................................................................................................. 4-524-52
List of figures
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
xxii Alcatel-Lucent 1830 PSS
8DG-62717-HBAA-TJZZA Release 8.1
Issue 1 October 2015
4-32 Straight LC fiber boot ............................................................................................................................................ 4-534-53
4-33 Angled/flexible MPO fiber boot ........................................................................................................................ 4-534-53
4-34 Step one of "pretzel" method .............................................................................................................................. 4-574-57
4-35 Step 2 of "pretzel" method ................................................................................................................................... 4-574-57
4-36 Step 3 of "pretzel" method ................................................................................................................................... 4-584-58
4-37 Step 4 of "pretzel" method ................................................................................................................................... 4-584-58
4-38 Step 5 of "pretzel" method ................................................................................................................................... 4-594-59
4-39 Fiber storage tray fiber routing .........................................................................................................