· 73 SENSORS When the Guide Fibers Amplifiers F-500 F-100 F-300 F-410 F-311 F-301-F7/ F-301-F FIBER LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS

73

Related Information

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

FIBERSENSORS

LASERSENSORS

PHOTOELECTRICSENSORS

MICROPHOTOELECTRIC

SENSORS

AREASENSORS

LIGHT CURTAINS /SAFETY

COMPONENTSPRESSURE /

FLOWSENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASUREMENTSENSORS

STATIC ELECTRICITYPREVENTION

DEVICES

LASERMARKERS

PLC

HUMAN MACHINE INTERFACES

ENERGY CONSUMPTION VISUALIZATION COMPONENTS

FA COMPONENTS

MACHINE VISION SYSTEMS

UV CURING SYSTEMS

Digital Fiber Sensor

FX-500 SERIES Ver.2 Fiber selection ................................... P.5~

At the industry’s leading edge

Conforming toEMC Directive

Listing

PNP output type available

Timer Light intensity monitor

Automatic sensitivity setting

Interferenceprevention

Certified

General precautions ................... P.1458~

General terms and conditions ............. F-7

Glossary of terms........................ P.1455~

Sensor selection guide ……………… P.3~

Test input External sync.panasonic.net/id/pidsx/global

Ver.2

* There is no change in Model No. and price due to version upgrade.

* Cover opened state is shown.

Super quality fiber FX-500 series

Previous amplifierL

MODE

D

L

MODE

D

L

MODE

D

L

MODE

D

1/4[from previous]

incident light intensity variation

Incident light intensities are stable.

Requires setting different threshold values for each sensor.

Large variation inincident light intensity.

Can control by using just one threshold value.

Unify the threshold value

Variation in the threshold value

Thresholdvalue

Incident light intensity

Thresholdvalue




High stability! When the FX-500 series is used together with our super quality fiber, the incident light intensity variation among units is decreased to only 1/4 of that of conventional models.By being close to absolute values instead of modified digital values, changes in detection that could not be found in the past can now be monitored.

Operation keys (setting switch and MODE key) have been renewed to be easy to operate. Also, the color of the keys has been changed from black to light gray to achieve good visibility in dim light.

Improved the operability and visibility of the operation keys

Previous Upgraded (Ver. 2)

Setting switch MODE key Setting switch MODE key

Clickingtouch!

Ramco National 800-280-6933 | [email protected] www.panasonicsensors.com

Digital Fiber Sensor FX-500 SERIES Ver.2 74

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

FIBERSENSORS

LASERSENSORS


MICROPHOTOELECTRICSENSORS

AREASENSORS

LIGHT CURTAINS /SAFETY COMPONENTSPRESSURE / FLOWSENSORSINDUCTIVEPROXIMITYSENSORS


SENSOROPTIONS

SIMPLEWIRE-SAVINGUNITS

WIRE-SAVING SYSTEMS

MEASUREMENTSENSORS

STATIC ELECTRICITYPREVENTIONDEVICES

LASERMARKERS

PLC



FA COMPONENTS


UV CURING SYSTEMS

Note: When using FD-NFM2.

Max. 5.7 times! (Note)longer than the previous modelFD-41

FD-NFM2

FX-500HYPR mode

PreviousFX-301 (LONG mode)

Max. 25 μs response time HH y p e r

YPR mode incorporatedFX-500 in combination with small diameter fibers which can handle challenging detections, allows long sensing range.

FX-500 with its high response time contributes to improve productivity.

Performing minute object detection when using a small diameter fiber is now possible with a high response time and longer sensing range.

A quality that surpassed that of standard fibers!New fibers developed using a new manufacturing method adopted by our own factory along with a persistent quality control system.The basic performance of a standard fiber is greatly enhanced!

More bendable!

ø2.2 mm ø0.087 in standard fiberStable emission amount

More flexible!

Integrated high-precision plug

Expanded temperature range

The centering precision of the fiber core attached to the inserting plug is doubled. As the insertion precision is increased, the variation among units can be greatly suppressed.

Variation in emission amount of the fiber core is controlled down to less than ±10 %, achieving a stable detection.• Beam axis deviation: Thru-beam type within ±2 °, Reflective type within ±3 °• Beam axis centering precison: within ± 150 μm

* Bending conditonsBending radius: R10 mm R 0.394 in, Reciprocating bending 180°

R4mmR0.157in

R4

Single core standard fiber with high flexibility

In general, high-flexibility types adopt a multi-fiber core, which may result in large variation in light emission.

–55 to+80 °C–67 to+176 °F

Ambient temperature [– 40 to +70 °C – 40 to +158 °F in previous model] Bending radius [Previous model is R25 mm R0.984 in]

Bending durability [Previous model is 1,000 times]

1/6of that of previous model

more thanprevious model

New

mat

eria

l

Pre

viou

s1.2 times

10 milliontimes

10,000 timesmore than previous model

• Centering precision: within ± 40 μm

±10

FX-500 with its accurate detection catches fractional differences in light intensity, achieving high precision and solving low-hysteresis applications.

So accurate! Sharp detection with suppressed hysteresis

• Highly accurate detection while avoiding saturation H-01 mode

FT-A11

Reflector

Retroreflective type fiber

• Long range detection of small objects with small difference in light intensity H-02 mode

FR-Z50HW


75 Digital Fiber Sensor FX-500 SERIES Ver.2

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

FIBERSENSORS

LASERSENSORS


MICROPHOTOELECTRIC

SENSORS

AREASENSORS

LIGHT CURTAINS /SAFETY

COMPONENTSPRESSURE /

FLOWSENSORS

INDUCTIVEPROXIMITY

SENSORS


SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASUREMENTSENSORS

STATIC ELECTRICITYPREVENTION

DEVICES

LASERMARKERS

PLC



FA COMPONENTS


UV CURING SYSTEMS

Resolves variation in displayed incident light intensity Display adjustment setting

The variation in display can be adjusted to random values. This helps to define proper instruction in a work order.

Displayadjustment

setting

Unify incident light intensity into any valueCurrent incident light intensity

Compact cover does not get in the way

Reduced to 1/3 of the previous model’s size

Clearly visible even from sideways

R23 mmR0.906 in

Previous space requirement

Flat display with wide viewing angleThe large and high-contrast 7-segment display of high luminance provides clear visibility from a wide angle of view.

Stable detection while being eco-friendlyEmission power & gain settingIn cases when the incident light intensity is saturated, the light emitting amount can be adjusted to the optimal level by AUTO without changing the response time. This allows stable detection with an optimal S/N ratio and saves energy by controlling the emitting electric current.

Stable detection over long and short periodsStabilized emission amountThe “four-chemical emitting element”, which we are the first to incorporate to maintain a stable level of light emission, has now become an industry standard. FX-500 series continues to adopt the same emitting element as well as the “APC (Auto Power Control) circuit” which improves stability in short periods such as when the power is turned on.

Saves maintenance timeThreshold tracking functionThis function performs automatic setting to threshold value by checking the incident light intensity at desired intervals in order to follow the changes in the light amount resulting from changes in the environment over long periods (such as dust). This contributes to reduction in maintenance hours.

Suitable for preventative maintenanceSelf-diagnosis output

FX-502(P) / 505(P)-C2 can set Output 2 as a self-diagnosis output. When the teaching of Output 1’s threshold value is carried out, Output 2 is set concurrently with the setting randomly shifted by the amount of surplus of threshold value. Light intensity deterioration due to fiber breakage or dust accumulation can be notified as an alarm output.

FX-502(P)FX-505(P)-C2

Detect deterioration in light intensity (e.g. Useful in dusty environment)

Self-diagnosis can be used with the threshold tracking function for added effectiveness.

Auto mode (AUTO) and 3-level manual mode (H / M / L [fine-adjustable]) are incorporated.

Object present

Object absent

Normal AUTO

SaturatedSaturated

Detecting a transparent sheet



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

FIBERSENSORS

LASERSENSORS


MICROPHOTOELECTRICSENSORS

AREASENSORS

LIGHT CURTAINS /SAFETY COMPONENTSPRESSURE / FLOWSENSORSINDUCTIVEPROXIMITYSENSORS


SENSOROPTIONS


WIRE-SAVING SYSTEMS

MEASUREMENTSENSORS

STATIC ELECTRICITYPREVENTIONDEVICES

LASERMARKERS

PLC



FA COMPONENTS


UV CURING SYSTEMS

Remote control improves work efficiency by external input

Work efficiency can be improved by operating via PLC output or other external signal.(FX-502(P) can operate via external signal when switching from Output 2 to external input.)

Functions operable by external inputFull-auto / Limit / 2-point teaching Display adjustment setting

Data bank load / save Logical calculation (self-unit only)

Emission halt Copying function lock (self-unit only)

FX-502(P)FX-505(P)-C2

Built-in logic functionsNo PLC necessary, saving material and programming costs

Logical calculation functions Equipped with 5 timer typesA wide variety of timer control operations can be carried out by fiber sensors only.

3 logical calculations (AND, OR, XOR) are available with fiber sensor only. 3 logical operations can be selected against Output 1. Additional controller is not required so both wire-saving and cost reduction can be achieved.

Time chart Set to L-ON

Sensingcondition

Beam-receivedBeam-interruptedONOFF

ONOFF

ONOFF

ONOFF

ONOFF

T2

T2

T1 T1

T1

T1

T1

T1T1

ON-delay

OFF-delay

One-shot

ON/OFF-delay

ON-delay/One-shot

Timer period: 0.05 ms to 32 sOutput 1 has ON / OFF-delay and ON-delay / One-shot timers are available.

Calculation result output

External input (sensor, contact, PLC, etc.)

Calculation result output

Normal output operation

Normal operation

Calculation result outputLower side Output 1

Upper side Output 1

Output 1

Output 1

Output 2

Communication direction (Up to 12 units)

Calculation of two outputs in one amplifier

Calculation of two neighboring amplifiers

Calculation of one amplifier and external input

FX-502(P) / 505(P)-C2

FX-502(P) / 505(P)-C2

Synchronization fiber

Detection fiber

Smooth setup changes by 8 data banksThe number of data banks used for saving the setup conditions of the amplifirer is increased to eight. Setup conditions can be saved and loaded to make setup changes easy at a worksite where multiple models are manufactured.

An optical communication function allows sensors to be adjusted simultaneouslyThe data that is currently set can be copied and saved all at once for all amplifiers connected together from the right side thanks to the optical communication function.This greatly reduces troublesome setup tasks and makes setup much smoother.

Single copy & save operation for all amplifiers

Optical communication window

Main cable

Sub cable

FX-502

Main cable (4-core)CN-74-CSub cable (2-core)CN-72-C

FX-501

Main cable (3-core)CN-73-CSub cable (1-core)CN-71-C

The same part number can be used as either a main unit or sub unit!

Disconnection is possible without moving the amplifier sideways

No need to specify a main unit or sub unitAll FX-500 amplifiers can be used as either a main unit or a sub unit. Just use a main cable or a sub cable to distinguish the two. This reduces the costs of inventory management.

Analog output cable typeTo monitor the sensing of objects, a 4 to 20 mA analog current is output in respond to the digital value of the incident light intensity.

FX-505(P)-C2

20

Outpu

t curr

ent (m

A)

4

4,000/8,0000 Incident light intensity (digit)

The meandering path can be monitored as the light intensity changes.

Actual position

Meandering position

Edge tracking of film or sheet



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

FIBERSENSORS

LASERSENSORS

PHOTO-ELECTRICSENSORS

MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC

ELECTRICITYPREVENTION

DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY

CONSUMPTION VISUALIZATION COMPONENTS

FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

ORDER GUIDE

Amplifiers Quick-connection cable is not supplied with FX-501(P) and FX-502(P). Please order it separately.

Type Appearance Model No. Emitting element Output External input

Sta

ndar

d ty

pe

FX-501

Red LED

NPN open-collector transistor−

FX-501P PNP open-collector transistor

2-ou

tput

type FX-502 NPN open-collector transistor 2 outputs

Incorporated (Switchable with Output 2)

FX-502P PNP open-collector transistor 2 outputs

Cab

le ty

pe FX-505-C2 NPN open-collector transistor 2 outputsanalog output

Incorporated

FX-505P-C2 PNP open-collector transistor 2 outputsanalog output

Quick-connection cablesFor FX-501(P) Quick-connection cable is not supplied with the amplifier. Please order it separately.

Type Model No. Description

Main cable(3-core)

CN-73-C1 Length: 1 m 3.281 ft0.2 mm2 3-core cabtyre cable, with connector on one endCable outer diameter: ø3.3 mm ø0.130 in

CN-73-C2 Length: 2 m 6.562 ft


Sub cable(1-core)

CN-71-C1 Length: 1 m 3.281 ft 0.2 mm2 1-core cabtyre cable, with connector on one endCable outer diameter: ø3.3 mm ø0.130 inConnectable to a main cable up to 15 cables.



Main cable• CN-73-C

Sub cable• CN-71-C

For FX-502(P) Quick-connection cable is not supplied with the amplifier. Please order it separately.

Type Model No. Description

Main cable(4-core)

CN-74-C1 Length: 1 m 3.281 ft0.2 mm2 4-core cabtyre cable, with connector on one endCable outer diameter: ø3.3 mm ø0.130 in



Sub cable(2-core)

CN-72-C1 Length: 1 m 3.281 ft 0.2 mm2 2-core cabtyre cable, with connector on one endCable outer diameter: ø3.3 mm ø0.130 inConnectable to a main cable up to 15 cables.



Main cable• CN-74-C

Sub cable• CN-72-C

Appearance Model No. Description

MS-DIN-E

When amplifiers are mounted in cascade, or when an amplifier moves depending on the way it is installed on a DIN rail, these end plates clamp amplifiers into place on both sides. Make sure to use end plates when cascading multiple amplifiers together.Two pcs. per set

End plates End plates are not supplied with the amplifier. Please order them separately when the amplifiers are mounted in cascade.



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

FIBERSENSORS

LASERSENSORS

PHOTO-ELECTRICSENSORSMICROPHOTO-ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /SAFETYCOMPONENTSPRESSURE / FLOWSENSORS

INDUCTIVEPROXIMITYSENSORS


SENSOROPTIONS


WIRE-SAVING SYSTEMS

MEASURE-MENTSENSORSSTATIC ELECTRICITYPREVENTIONDEVICES

LASERMARKERS

PLC

HUMAN MACHINE INTERFACESENERGY CONSUMPTION VISUALIZATION COMPONENTS

FA COMPONENTS


UV CURING SYSTEMS

OPTIONS

Amplifier mounting bracket• MS-DIN-2

Communication window seal

Connector seal

Accessory• FX-MB1 (Amplifier protection seal)

10 sets of 2 communication window seals and 1 connector seal

Designation Model No. Description

Amplifiermounting bracket MS-DIN-2 Mounting bracket for amplifier

Thru-beam type (one pair set)

Type Shape of fiber head(mm) Model No.

Bendingradius(mm)

Fiber cablelength

Sensing range (mm in)Beam axis dia.(mm)

Beam axis position /Inclination of beam axis

Optical transmission loss

Protection Ambient temp. DimensionsFX-500 series

U-LGLONGFASTH-SP

Thre

aded M

3 FT-30R2

Bending durability

2 m

STD400 15.748

HYPR 1,350 53.150

810 31.890 650 25.591 210 8.268 75 2.953

ø0.5

150 μm/ ±2° ±10 % IP67 −55 to

+80 °C

P.51

M4 FT-40

R4Bending durability

STD1,200 47.244

HYPR 3,600 141.732 (Note)

2,200 86.614 1,700 66.929

530 20.866 190 7.480

ø1

Cyl

indr

ical ø1

·5 FT-S20 R2

Bending durability

STD400 15.748

HYPR 1,350 53.150

810 31.890 650 25.591 210 8.268 75 2.953

ø0.5

P.55

ø3 FT-S30 R4

Bending durability

STD1,200 47.244

HYPR 3,600 141.732 (Note)

2,200 86.614 1,700 66.929

530 20.866 190 7.480

ø1

Note: The fiber cable length practically limits the sensing range.

Reflective type


Bendingradius(mm)

Fiber cablelength

Sensing range (mm in) (Note)Beam axis position /Inclination of beam axis

Optical transmission loss


U-LGLONGFASTH-SP

Thre

aded

M3 FD-30


2 m

STD160 6.299

HYPR 600 23.622

330 12.992 250 9.843 80 3.150 25 0.984

150 μm/ ±3° ±10 % IP67 −55 to

+80 °C

P.59

M4 FD-40

M6 FD-60


STD520 20.472

HYPR 1,550 61.024

900 35.433 740 29.134 260 10.236

90 3.543 P.60

Cylin

drica

lø3 FD-S30

STD160 6.299

HYPR 600 23.622

330 12.992 250 9.843 80 3.150 25 0.984

P.67

Note: The sensing range is specified for white non-glossy paper.

M3

12

15

M4

10

ø1.5

ø3

10

M3

12

M4

14

17

M6

10

ø3

: Refers to a fiber which possesses both unbreakable (bending radius: R10 mm R0.394 in, reciprocating bending: 180°) and more flexible (bending radius: R4 mm R0.157 in or less) features.

Super quality

LIST OF FIBERS



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS



Bendingradius(mm)

Fiber cablelength

: Free-cut

Sensing range (mm in) (Note 1)Beam axis dia.(mm)



U-LGLONGFASTH-SP

Thre

aded

M3

FT-31 R2

Bending durability

2 m

STD315 12.402

HYPR 1,350 53.150

770 30.315 550 21.654

210 8.268 70 2.756

ø0.5

150 μm/ ±2°

IP67

−55 to +80 °C

P.51

FT-31W R1STD

260 10.236HYPR

990 38.976

590 23.228 440 17.323

150 5.906 53 2.087

150 μm/ ±3°

−40 to +60 °C

M4

FT-43 R4

Bending durability

STD1,400 55.118

HYPR 3,600 141.732 (Note 2)

2,800 110.236 2,100 82.677

770 30.315 240 9.449

ø1.5150 μm

/ ±2°−55 to +80 °C

FT-42 STD

1,130 44.488HYPR

3,600 141.732 (Note 2)

2,050 80.709 1,600 62.992

530 20.866 190 7.480

ø1

FT-42W R1STD

800 31.496HYPR

3,300 129.921

1,900 74.803 1,400 55.118

490 19.291 160 6.299

150 μm/ ±3°

−40 to +60 °C

FT-45X R4 1 mSTD

1,200 47.244HYPR

1,600 62.992 (Note 2)

1,600 62.992(Note 2)1,600 62.992(Note 2)

630 24.803 200 7.874 150 μm

/ ±2°−55 to +80 °C

P.52

Elb

ow FT-R40 R4

Bending durability

2 m

STD930 36.614

HYPR 3,600 141.732 (Note 2)

1,750 68.898 1,500 59.055

500 19.685 160 6.299

P.54

M14

Long

rang

e

FT-140 10 m

STD19,600 771.654

HYPR 19,600 771.654 (Note 2)

(Note 2)19,600 771.654(Note 2) 19,600 771.654(Note 2)

16,000 629.921 6,300 248.031

ø10 ― −40 to +70 °C P.51

Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut.2) The fiber cable length practically limits the sensing range.

M3

12

M3

12Lens mountable

15

M4

15

M4Lens mountable

15

M4Lens mountable

20

M4Lens mountable, Stainless-jacketed

15

M4

Lens mountable

With expansion lens

40

M14


Threaded type

LIST OF FIBERS



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Threaded type

LIST OF FIBERS

Reflective type


Bendingradius(mm)

Fiber cablelength

: Free-cut

Sensing range (mm in) (Note 1, 2)Beam axis position /Inclination of beam axis


U-LGLONGFASTH-SP

Thre

aded

M3

FD-31 R2

Bending durability

2 m

STD125 4.921

HYPR 515 20.276

290 11.417 220 8.661 80 3.150 25 0.984

150 μm/ ±3°

IP67

−55 to +80 °C

P.59

FD-31W R1STD

80 3.150HYPR

330 12.992

180 7.087 140 5.512 45 1.772 12 0.472

― −40 to +60 °C

FD-32G R2

Bending durability

STD200 7.874

HYPR 650 25.591

380 14.961 270 10.630

95 3.740 27 1.063

―

IP40

−55 to +80 °C

FD-32GX R2 1 m(Note 3)

STD200 7.874

HYPR 630 24.803

410 16.142 360 14.173

100 3.937 30 1.181

―

Ultra

-sm

all d

iam

eter

FD-EG30

R4 500 mm

STD48 1.890

HYPR 170 6.693

130 5.118 110 4.331 30 1.181

9 0.354 ― −40 to

+70 °C P.61

FD-EG31 STD20 0.787HYPR

85 3.346

45 1.772 35 1.378 12 0.472 3.5 0.138

― −20 to +60 °C P.62

M4

FD-41 R2

Bending durability

2 m

STD125 4.921

HYPR 515 20.276

290 11.417 220 8.661 80 3.150 25 0.984

150 μm/ ±3°

IP67

−55 to +80 °C

P.59

FD-41W R1STD

270 10.630HYPR

900 35.433

630 24.803 430 16.929

150 5.906 45 1.772

― −40 to +60 °C

FD-42G R2

Bending durability

STD200 7.874

HYPR 650 25.591

380 14.961 270 10.630

95 3.740 27 1.063

―

IP40

−55 to +80 °C

P.60

FD-42GW R1STD

150 5.906HYPR

670 26.378

340 13.386 280 11.024

90 3.543 25 0.984

― −40 to +60 °C

M6

FD-62 R4

Bending durability

STD520 20.472

HYPR 1,500 59.055

1,000 39.370 940 37.008 340 13.386

110 4.331 150 μm/ ±3°

IP67

−55 to +80 °C

FD-61 STD

450 17.717HYPR

1,400 55.118

840 33.071 670 26.378

200 7.874 70 2.756

FD-61W R1STD

270 10.630HYPR

900 35.433

630 24.803 430 16.929

150 5.906 45 1.772

― −40 to +60 °C

FD-61G R4

Bending durability

STD420 16.535

HYPR 1,100 43.307

800 31.496 650 25.591

200 7.874 60 2.362

―

IP40−55 to +80 °CFD-64X R4 1 m

STD280 11.024

HYPR 670 26.378

500 19.685 410 16.142

160 6.299 50 1.969

― P.61

Elb

ow FD-R60 R4

Bending durability

2 m

STD290 11.417

HYPR 1,100 43.307

600 23.622 550 21.654

190 7.480 65 2.559

150 μm/ ±3° IP67 P.66

Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The sensing range is specified for white non-glossy paper. 3) The allowable cutting range is 700 mm 27.559 in from the end that the amplifier inserted.

M3

12

M3

12Coaxial, Lens mountable

M3

17

Coaxial, Lens mountable, Stainless-jacketed

M3

18

M3

16

Coaxial, Lens mountable

Coaxial, Lens mountableM3

16

M4

14

M4

14


25


25

17

M6

17

M6

17

M6

CoaxialM6

17Stainless-jacketed

22

M6

15

M6




Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS



Bendingradius(mm)

Fiber cablelength

: Free-cut

Sensing range (mm in) (Note 1)Beam axis dia.

(Fiber Core)(mm)


U-LGLONGFASTH-SP

Squ

are

head

M3 FT-R31


2m

STD270 10.630

HYPR1,000 39.370

580 22.835440 17.323

160 6.29955 2.165

ø0.5

IP67 −55 to+80 °C

P.54

M4

Lens mountable

FT-R43R4

Bending durability

STD 720 28.346

HYPR 3,000 118.110

1,600 62.9921,100 43.307

430 16.929130 5.118

ø1

FT-R41W

R1

STD800 31.496

HYPR3,200 125.984

1,800 70.8661,400 55.118

460 18.110150 5.906

IP40 −40 to +60 °CWith expansion lens

FT-R42WSTD

2,200 86.614HYPR

3,600 141.732

3,600 141.732(Note 2)3,500 137.7951,300 51.181

460 18.110ø2.2

Cable-protection typeCompatible with lens

FT-R44YR4

Bending durability

STD720 28.346

HYPR3,000 118.110

1,600 62.9921,100 43.307

430 16.929130 5.118

ø1 IP67(Note 3)

−55 to +80 °C P.55

M6

Full-protection type

FT-R60YSTD

2,100 82.677HYPR

3,600 141.732

3,600 141.732(Note 2)3,600 141.732(Note 2)

1,260 49.606400 15.748

ø3.5 IP68G

Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The fiber cable length practically limits the sensing range. 3) The fiber part is oil-resistant.

Reflective type


Bendingradius(mm)

Fiber cablelength

: Free-cut

Sensing range (mm in) (Note 1, 2)Beam axis dia.

(Fiber Core)(mm)


U-LGLONGFASTH-SP

Squ

are

head

M3


FD-R31GR2

Bending durability

2m

STD170 6.693

HYPR530 20.866

310 12.205260 10.236

85 3.34627 1.063

Emitterø0.5

IP40

−55 to+80 °C

P.66


FD-R32EG

R4 500mm

STD45 1.772

HYPR170 6.693

110 4.33192 3.62230 1.1819 0.354

Emitterø0.25

−40 to+70 °CCoaxial, Lens mountable

FD-R34EGSTD38 1.496HYPR

130 5.118

90 3.54370 2.75623 0.9067 0.276

Emitterø0.175


FD-R33EGSTD19 0.748HYPR84 3.307

44 1.73233 1.29911 0.433

3 0.118

Emitterø0.125 −20 to

+60 °C

M4 FD-R41R2

Bending durability

2m

STD210 8.268

HYPR710 27.953

430 16.929320 12.598

100 3.93734 1.339

ø0.75 IP67−55 to+80 °C

M6

Cable-protection type

FD-R61YR4

Bending durability

STD280 11.024

HYPR990 38.976

610 24.016435 17.126

160 6.29950 1.969

— IP67(Note 3)

M3

W5.5×H8×D16

M4

W7×H9×D13.5

M4

W7×H9×D13.9

M4

W7×H9×D14.4 (Note2)

W7×H9.5×D15.5

W10×H11×D21.2 (Note2)

W5.5×H8×D16

M3

W5.5×H8×D16

M3

W5.5×H8×D16

M3

W5.5×H8×D16

M3

W7×H9×D13.5

M4

W10×H11×D15.5

Square head type

LIST OF FIBERS


Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The sensing range is specified for white non-glossy paper. 3) The fiber part is oil-resistant.



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Cylindrical typeLIST OF FIBERS



Bendingradius(mm)

Fiber cablelength

: Free-cut



Protection Ambient temp. DimensionsFX-500 series U-LG FAST

LONG H-SP

Cyl

indr

ical

ø1 FT-S11


500 mmSTD90 3.543

HYPR 350 13.780

210 8.268 160 6.299

60 2.362 19 0.748

ø0.25 ―

IP67

−55 to +80 °C

P.55

ø1·

5

FT-S21

2 m

STD315 12.402

HYPR 1,350 53.150

770 30.315 550 21.654 210 8.268

70 2.756 ø0.5

150 μm/ ±2°

FT-S21W R1STD

260 10.236HYPR

990 38.976

590 23.228 440 17.323 150 5.906

53 2.087

150 μm/ ±3°

−40 to +60 °C

ø2·5 FT-S32


STD3,100 122.047

HYPR 3,600 141.732 (Note 2)

3,600 141.732(Note 2) 3,600 141.732(Note 2)

1,800 70.866 600 23.622

ø2 ― IP40 −40 to +70 °C

ø3 FT-S31W R1

STD800 31.496

HYPR 3,300 129.921

1,900 74.803 1,400 55.118

490 19.291 160 6.299

ø1 150 μm/ ±3°

IP67

−40 to +60 °C

Ultra

-sm

all d

iam

eter

ø3

FT-E13 R2

Bending durability

1 m

STD15 0.591HYPR 52 2.047

30 1.181 24 0.945 8 0.315 2 0.079

ø0.125 ―−40 to +70 °C P.52

FT-E23 STD75 2.953HYPR

270 10.630

160 6.299 125 4.921

42 1.654 13 0.512

ø0.25 ―

Side

-vie

w ø

4 FT-V40 R4

Bending durability

2 m

STD3,500 137.795

HYPR 3,600 141.732 (Note 2)

3,600 141.732(Note 2) 3,600 141.732(Note 2)

2,400 94.488 850 33.465

ø2.5 ― IP50 −40 to +60 °C P.56

Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The fiber cable length practically limits the sensing range.

6

ø1

10

ø1.5

10

ø1.5

8

ø2.5With lens, Long sensing range

10

ø3

ø3ø0.25

155

Narrow beam ø0.125mm

Sleeve part cannot be bent.

ø3ø0.4

155



25

ø4

3

Reflective type


Bendingradius(mm)

Fiber cablelength

: Free-cut

Sensing range (mm in) (Note 1, 2) Beam axis position /Inclination of beam axis

Protection Ambient temp. DimensionsFX-500 series U-LG FAST

LONG H-SP

Cyl

indr

ical

ø1·5 FD-S21


1 mSTD

80 3.150HYPR

190 7.480

130 5.118 110 4.331 37 1.457 11 0.433

― IP40

−55 to +80 °C

P.66

ø3

FD-S32 R4

Bending durability

2 m

STD420 16.535

HYPR 1,200 47.244

790 31.102 660 25.984 220 8.661

75 2.953

150 μm/ ±3°

IP67

P.67

FD-S32W R1STD

270 10.630HYPR

900 35.433

630 24.803 430 16.929

150 5.906 45 1.772

― −40 to +60 °C

FD-S31 R2

Bending durability

STD125 4.921

HYPR 515 20.276

290 11.417 220 8.661

80 3.150 25 0.984

150 μm/ ±3°

−55 to +80 °C

FD-S33GW R1STD

150 5.906HYPR

670 26.378

340 13.386 280 11.024

90 3.543 25 0.984

― IP40 −40 to +60 °C

ø5.

5

Metal-free

FD-S60Y

Protective tubeR30 mm Fiber


2 m(Note 4)

STD320 12.598

HYPR 600 23.622

590 23.228420 16.535200 7.87475 2.953

— IP68G −40 to +70 °C

Ultr

a-sm

all d

iam

eter

ø1·5 FD-E13

R4 1 m

STD12 0.472HYPR 50 1.969

29 1.142 25 0.984 7 0.276 2 0.079

―

IP40

−40 to +60 °C

P.61

ø3 FD-E23

STD55 2.165

HYPR 170 6.693

120 4.724 80 3.150 30 1.181 9 0.354

― −40 to +70 °C

Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The sensing range is specified for white non-glossy paper. 3) The allowable cutting range is 500 mm 19.685 in from the end that is inserted to the amplifier.

ø1.5

10

ø3

15

ø3

15

ø3

10

ø3

15

Coaxial

ø5.5

16

15 3

ø1.5 ø0.48


15 5

ø3 ø0.63





Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

SleeveLIST OF FIBERS




Bendingradius(mm)

Fiber cablelength

: Free-cut

Sensing range (mm in) (Note 1, 2)Beam axis dia.(mm)


U-LGLONGFASTH-SP

Thre

aded M

3 FT-31S R2

2 m

STD315 12.402

HYPR 1,220 48.031

740 29.134 550 21.654 195 7.677

63 2.480 ø0.5

IP67

−55 to +80 °C P.51

M4 FT-42S

R4 STD1,130 44.488

HYPR 3,600 141.732 (Note 2)

2,050 80.709 1,600 62.992

530 20.866 190 7.480

ø1

Cyl

indr

ical

Ultra

-sm

all d

iam

eter

ø3

FT-E13 R2

Bending durability

1 m

STD15 0.591HYPR 52 2.047

30 1.181 24 0.945 8 0.315 2 0.079

ø0.125−40 to +70 °C P.52

FT-E23 STD75 2.953HYPR

270 10.630

160 6.299 125 4.921

42 1.654 13 0.512

ø0.25

Sid

e-vi

ew ø2

FT-V23 R4

Bending durability

2 m

STD450 17.717

HYPR 1,800 70.866

1,000 39.370 880 34.646 280 11.024

90 3.543 ø0.75

IP30

−55 to +80 °C

P.55

FT-V25 R2

Bending durability

STD240 9.449

HYPR 900 35.433

550 21.654 480 18.898 140 5.512

45 1.772 ø0.5

P.56FT-V24W R1STD110 4.331

HYPR 380 14.961

230 9.055 200 7.874

60 2.362 20 0.787

−40 to +60 °C

ø2·5 FT-V30


STD680 26.772

HYPR 2,200 86.614

1,200 47.244 1,000 39.370

340 13.386 100 3.937

ø1.0 −55 to +80 °C

Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The fiber cable length practically limits the sensing range. 3) Bending radius of sleeve part is R10 mm R0.394 in or more.

Reflective type


Bendingradius(mm)

Fiber cablelength

: Free-cut

Sensing range (mm in) (Note 1, 2)


U-LGLONGFASTH-SP

Thre

aded

Ultra

-sm

all

diam

eter

M3 FD-EG30S R4 1 m

STD50 1.969

HYPR 170 6.693

110 4.331 80 3.150 30 1.181 9 0.354

IP40 −40 to +70 °C P.62

M4

FD-41S R2

2 m

STD125 4.921

HYPR 515 20.276

290 11.417 220 8.661 80 3.150 25 0.984

IP67

−55 to +80 °C

P.59

FD-41SW R1(Note 3)

STD80 3.150

HYPR 330 12.992

180 7.087 140 5.512 45 1.772 12 0.472

−40 to +60 °C

M6

FD-61S R4 STD

420 16.535HYPR

1,200 47.244

790 31.102 660 25.984 220 8.661 75 2.953

−55 to +80 °C P.60

Cyl

indr

ical

Ultr

a-sm

all d

iam

eter

ø1·5 FD-E13

R4 1 m

STD12 0.472HYPR 50 1.969

29 1.142 25 0.984

7 0.276 2 0.079

IP40

−40 to +60 °C

P.61

ø3 FD-E23

STD55 2.165

HYPR 170 6.693

120 4.724 80 3.150 30 1.181 9 0.354

−40 to +70 °C

Sid

e-vi

ew

ø3

FD-V30 R2

Bending durability

2 m

STD65 2.559

HYPR 240 9.449

130 5.118 120 4.724 35 1.378 14 0.551

IP30

−55 to +80 °C

P.67

FD-V30W R1STD20 0.787HYPR

80 3.150

40 1.575 30 1.181 10 0.394

2 0.079

−40 to +60 °C

ø5

FD-V50 R4

Bending durability

STD120 4.724

HYPR 370 14.567

220 8.661 210 8.268 75 2.953 25 0.984

−55 to +80 °C P.68

Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The sensing range is specified for white non-glossy paper. 3) Bending radius of sleeve part is R10 mm R0.394 in or more.

Sleeve 40mm M3

ø0.8810

Bending durability(Note 3)

Sleeve 40mm M4

ø1.4812


ø3ø0.25

155



ø3ø0.4

155



ø1 ø21.1

1520Sleeve part cannot be bent.

ø1 ø2

1


ø1 ø2

1


ø1.5 ø2.51.3


Sleeve 15 mm


M3 ø0.8

15

Sleeve 40 mmM4

12ø1.48


M4

12ø1.48

Sleeve 40 mm

Sleeve 40 mmM6

15ø2.5


15 3

ø1.5 ø0.48


15 5

ø3 ø0.63


Small diameter

Sleeve part cannot be bent.ø1.5ø3

15152

Sleeve part cannot be bent.ø1.5ø3

15152

Sleeve part cannot be bent.ø2ø5

2015

2.3



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Flat type

LIST OF FIBERS




Bendingradius(mm)

Fiber cablelength

: Free-cut



U-LGLONGFASTH-SP

Flat

FT-Z30H R2

Bending durability

2 m

STD3,500 137.795

HYPR 3,600 141.732 (Note 2)

3,600 141.732(Note 2) 3,600 141.732(Note 2)

2,600 102.362 810 31.890

2 × 3

IP40

−40 to +60 °C

P.57

FT-Z30HW R1

FT-Z30E R2

Bending durability

STD3,500 137.795

HYPR 3,600 141.732 (Note 2)

3,600 141.732(Note 2) 3,600 141.732(Note 2)

2,400 94.488 740 29.134

P.56

FT-Z30EW R1STD

3,400 133.858HYPR

3,600 141.732 (Note 2)

3,600 141.732(Note 2) 3,600 141.732(Note 2)

2,000 78.740 630 24.803

P.57

FT-Z30 R2

Bending durability

STD2,100 82.677

HYPR 3,600 141.732 (Note 2)

3,600 141.732(Note 2) 3,600 141.732(Note 2)

1,200 47.244 410 16.142

ø2

P.56

FT-Z30W

R1

STD1,500 59.055

HYPR 3,600 141.732 (Note 2)

3,300 129.921 3,200 125.984 1,000 39.370

280 11.024 P.57

With

bos

s

FT-Z20W

1 m

STD620 24.409

HYPR 1,600 62.992(Note 2)

1,500 59.0551,100 43.307

420 16.535130 5.118

ø1.5

P.56

FT-Z20HBW STD

260 10.236HYPR

1,100 43.307

670 26.378 570 22.441 180 7.087

55 2.165 ø0.5 IP67

FT-Z40W

2 m

STD1,500 59.055

HYPR 3,600 141.732 (Note 2)

3,300 129.9212,300 90.551

900 35.433290 11.417

ø1.5 IP40

P.57

FT-Z40HBW STD

800 31.496HYPR

3,300 129.921

1,900 74.803 1,400 55.118

490 19.291 160 6.299

ø1 IP67


Top sensing W3 × H8 × D12

Top sensing W3 × H8 × D12

W3 × H12 × D8Side sensing

Side sensing W3 × H12 × D8

Front sensingW8.5 × H12 × D3

Front sensingW8.5 × H12 × D3

Front sensingW10 × H7 × D2

Fiber bending typeW2 × H10 × D10

Front sensing W14 × H7 × D3.5

Fiber bending typeW3.5 × H14 × D11

Reflective type


Bendingradius(mm)

Fiber cablelength

: Free-cut



U-LGLONGFASTH-SP

Flat

With

bos

s

FD-Z20W

R1

1 m

STD1 to 65 0.039 to 2.559

HYPR260 10.236

150 5.906 130 5.118

2 to 45 0.079 to 1.7725 to 13 0.197 to 0.512

IP40

−40 to +60 °C P.68

FD-Z20HBW STD

2 to 85 0.079 to 3.346HYPR

1 to 340 0.039 to 13.386

1 to 210 0.039 to 8.2681 to 180 0.039 to 7.087

2 to 55 0.079 to 2.1653 to 15 0.118 to 0.591

IP67

FD-Z40W

2 m

STD190 7.480

HYPR790 31.102

440 17.323 390 15.354

1 to 120 0.039 to 4.724 2 to 35 0.079 to 1.378

IP40

FD-Z40HBW STD

260 10.236HYPR

760 29.921

540 21.260 470 18.504

1 to 160 0.039 to 6.2992 to 50 0.079 to 1.969

IP67

Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The sensing range is specified for white non-glossy paper.

Front sensing

W10 × H7 × D2Fiber bending type

W2 × H10 × D10

Front sensing

W14 × H7 × D3.5Fiber bending type

W3.5 × H14 × D11



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS


LIST OF FIBERS

High precision fiber & spot lens

DesignationShape of head

(mm)Dimensions

Spot diameter(mm in) (Note)

Distance to focal point

(mm in) (Note)

Lens Applicable fibers

Model No. Ambienttemp. Model No.

Fiber cablelength

: Free-cut

Bendingradius(mm)

Protection Ambient temp. Dimensions

Finest spot lens

P.71ø0.1 ø0.004

7 ±0.5 0.276 ±0.020 FX-MR6 −20 to

+60 °C

FD-EG31500 mm R4

IP40

−20 to +60 °C P.62

P.71 ø0.2 ø0.008 FD-EG30 −40 to +70 °C P.61

P.71

ø0.4 ø0.016

FD-42G

2 m


−55 to +80 °C P.60

FD-42GW R1 −40 to +60 °C

FD-32GR2

Bending durability −55 to

+80 °C P.59

FD-32GX 1 m R2

P.71ø0.15 ø0.006

7.5 ±0.5 0.295 ±0.020 FX-MR3 −40 to

+70 °C

FD-EG31 500 mm R4

−20 to +60 °C P.62

P.71ø0.3 ø0.012 FD-EG30 −40 to

+70 °C P.61

P.71

ø0.5 ø0.020

FD-42G

2 m


−55 to +80 °C P.60

FD-42GW R1 −40 to +60 °C

FD-32GR2

Bending durability −55 to

+80 °C P.59

FD-32GX 1 m R2

Pinpoint spot lens

P.70

ø0.5 ø0.020 6 ±1 0.236 ±0.039 FX-MR1 −40 to

+70 °CFD-42G

2 m


−55 to +80 °C

P.60

FD-42GW R1 −40 to +60 °C

Zoom lens

P.70

ø0.7 to ø2.0 ø0.028 to

ø0.079

18.5 to 43 approx.0.728 to 1.693

approx. FX-MR2 −40 to

+70 °CFD-42G


−55 to +80 °C

FD-42GW R1 −40 to +60 °C

Zoom lens(Side-view type)

P.71

ø0.5 to ø3.0 ø0.020 to

ø0.118

13 to 30 approx.0.512 to 1.181

approx. FX-MR5 −40 to

+70 °CFD-42G


−55 to +80 °C

FD-42GW R1 −40 to +60 °C

Note: Spot diameter, distance to focal point and sensing range are specified for FX-500 series.

ø4

16

ø4

15

ø4

20.2

ø7.1

27.1

W6.3 × H20.3× D10.3

Small spot



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Small spot

LIST OF FIBERS

Square head type M3, reflective type fiber & spot lens

Type Spot diameter(mm in) (Note)


(mm in) (Note)

Lens FiberShape (mm in)

Dimensions Model No. Shape Emitting fiber core (mm in) Model No.

Finest spotlens

ø0.1 ø0.004approx.

7 ±0.50.276 ±0.020

P.71

FX-MR7

ø0.125 ø0.005 FD-R33EG

ø0.125 ø0.005 FD-EG31ø0.15 ø0.006

approx. ø0.175 ø0.007 FD-R34EG


ø0.25 ø0.010 FD-R32EG

ø0.25 ø0.010 FD-EG30


ø0.5 ø0.020 FD-R31G

ø0.5 ø0.020 FD-32G

ø0.5 ø0.020 FD-32GX

ø0.5 ø0.020 FD-42G

ø0.5 ø0.020 FD-42GW

Type Spot diameter(mm in) (Note)

Sensing range

(mm in) (Note)

Lens Applicable fibersShape(mm in) Model No. Emitting fiber

core (mm in) Model No.

Zoom lens

ø0.4 to ø2.0 ø0.016 to ø0.079 approx.

10 to 30 0.394 to1.181

P.71

FX-MR8

ø0.125 ø0.005 FD-R33EG, FD-EG31ø0.4 to ø2.2 ø0.016 to ø0.087 approx. ø0.175 ø0.007 FD-R34EGø0.5 to ø2.5 ø0.020 to ø0.098 approx. ø0.25 ø0.010 FD-R32EG, FD-EG30ø0.8 to ø3.5 ø0.031 to ø0.138 approx. ø0.5 ø0.020 FD-R31G, FD-32G, FD-32GX, FD-42G, FD-42GW

Parallel light lens ø4.0 ø0.157 approx. 0 to 30

0 to 1.181

P.71

FX-MR9

ø0.125 ø0.005 FD-R33EG, FD-EG31ø0.175 ø0.007 FD-R34EGø0.25 ø0.010 FD-R32EG, FD-EG30ø0.5 ø0.020 FD-R31G, FD-32G, FD-32GX, FD-42G, FD-42GW


15.30.602

ø5 ø0.197

150.591

ø5 ø0.197

ø5 ø0.197

100.394



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

LIST OF FIBERS


Narrow beamThru-beam type (one pair set)


Bendingradius(mm)

Fiber cablelength

: Free-cut


Inclination of beam axis


U-LGLONGFASTH-SP

Nar

row

bea

m

Aperture angle 2°

FT-KS40 R2

Bending durability

2 m

STD3,600 141.732

HYPR 3,600 141.732 (Note 2)

(Note 2)3,600 141.732(Note 2) 3,600 141.732(Note 2) 3,600 141.732(Note 2)

1,200 47.244 ø2.2 ― IP40

−40 to +60 °C P.54

Sid

e-vi

ew

Aperture angle 2°

FT-KV40 STD

3,600 141.732HYPR

3,600 141.732 (Note 2)


1,200 47.244 ø2.5 ±0.8°

IP30

Aperture angle 2°

FT-KV40W R1STD

3,600 141.732HYPR

3,600 141.732 (Note 2)

(Note 2)3,600 141.732(Note 2) 3,600 141.732(Note 2)

3,100 122.047 940 37.008

Aperture angle 3°

FT-KV26 R2

Bending durability

STD710 27.953

HYPR 2,500 98.425

1,600 62.992 1,200 47.244

440 17.323 160 6.299

ø1 X ±1°Z ±0.5°


Retroreflective type


Bendingradius(mm)

Fiber cablelength

: Free-cut



U-LGLONGFASTH-SP

With

po

lariz

ing

filte

r

FR-Z50HW R1

2 m

STD100 to 990 3.937 to 38.976

HYPR 100 to 1,900 3.937 to 74.803

100 to 1,400 3.937 to 55.118100 to 1,200 3.937 to 47.244

100 to 780 3.937 to 30.709100 to 490 3.937 to 19.291

IP40 −25 to +55 °C

P.58

Waf

er m

appi

ng

W4 × H2 × D21.5

W7.5 × H2.2 × D11.2

Apertureangle 3°(emitter) FR-KZ22E


STD15 to 310 0.591 to 12.205

HYPR 15 to 570 0.591 to 22.441

15 to 460 0.591 to 18.11015 to 410 0.591 to 16.142

15 to 220 0.591 to 8.66115 to 100 0.591 to 3.937

IP30 −40 to +60 °C

Nar

row

bea

m

Top s

ensin

g

FR-KZ50H STD20 to 300 0.787 to 11.811

HYPR 20 to 1,000 0.787 to 39.370

20 to 800 0.787 to 31.49620 to 400 0.787 to 15.74820 to 200 0.787 to 7.87420 to 200 0.787 to 7.874

Side s

ensin

g

FR-KZ50E

Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The sensing range is the possible setting range for the attached reflector. The fiber can detect an object less than setting range for the reflector.

Refer to p.90 for the sensing range when FR-Z50HW is used in combination with a reflector (optional).

Reflective type


Bendingradius(mm)

Fiber cablelength

: Free-cut



U-LGLONGFASTH-SP

Long

ra

nge

FD-Z50HW R1 2 m

STD10 to 650 0.394 to 25.591

HYPR 10 to 2,500 0.394 to 98.425

10 to 1,100 0.394 to 43.30710 to 1,000 0.394 to 39.370

10 to 410 0.394 to 16.14215 to 130 0.591 to 5.118

IP40 −40 to +60 °C P.68


20

ø3.5 ø3.7

25

ø4

3

25

ø4

3

20

1.5 × 2

2

W5.2 × H9.5 × D16

W30 × H30 × D0.5

W10.6 × H28 × D10.1

W5.2 × H9.5 × D21

W28 × H10.6 × D10.1

W9.5 × H25 × D5.2

W5.2 × H9.5 × D16



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Wide beam

LIST OF FIBERS



Bendingradius(mm)

Fiber cablelength

: Free-cut



U-LGLONGFASTH-SP

Wid

e be

am

FT-A32 R2

Bending durability

2 m

STD3,600 141.732

HYPR 3,600 141.732 (Note 2)


2,100 82.677

3.2 × 32

IP40

−40 to +60 °C

P.52

Allows flexible wiring

FT-A32W R1STD

3,600 141.732HYPR

3,600 141.732 (Note 2)


3,000 118.110

−40 to +55 °C

FT-A11 R2

Bending durability

STD3,600 141.732

HYPR 3,600 141.732 (Note 2)


1,100 43.307 2.2 × 11

−40 to +70 °C

Allows flexible wiring

FT-A11W R1STD

3,600 141.732HYPR

3,600 141.732 (Note 2)


1,300 51.181

−40 to +55 °C

Arr

ay FT-AL05 R2

Bending durability

STD860 33.858

HYPR 2,300 90.551

1,550 61.024 1,500 59.055

500 19.685 170 6.693

0.25 × 5.5 −55 to +80 °C


Reflective type


Bendingradius(mm)

Fiber cablelength

: Free-cut



U-LGLONGFASTH-SP

Wid

e be

am FD-A16 R4

Bending durability

2 m

STD200 7.874

HYPR Cannot use

200 7.874 200 7.874 140 5.512

75 2.953 IP40

−40 to +60 °C

P.61

Arr

ay FD-AL11 R2

Bending durability

STD320 12.598

HYPR 670 26.378

530 20.866 510 20.079

180 7.087 50 1.969

−55 to +80 °C


Sensing width32mm

W5 × H69 × D20

Sensing width32mm

W5 × H69 × D20

11mm

W4.2 × H31 × D13.5

Sensing width

Sensing width11mm

W4.2 × H31 × D13.5

W5 × H15 × D15

Sensing width5.5mm

W7 × H15 × D30

W5 × H20 × D20




Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

Convergent reflective type

LIST OF FIBERS


Reflective type


Bendingradius(mm)

Fiber cablelength

: Free-cut



U-LGLONGFASTH-SP

Gla

ss s

ubst

rate

det

ectio

n

FD-L32H R4

Bending durability

4 m

STD0 to 56 0 to 2.205

HYPR 0 to 110 0 to 4.331

0 to 87 0 to 3.4250 to 74 0 to 2.913

1 to 38 0.039 to 1.496Cannot use

IP40

−40 to +60 °C P.66

FD-L30A R2

Bending durability

3 m

STD0 to 43 0 to 1.693

HYPR 0 to 43 0 to 1.693

0 to 43 0 to 1.6930 to 43 0 to 1.6930 to 42 0 to 1.6540 to 29 0 to 1.142

0 to +70 °C

P.65

FD-L31A R4

Bending durability

STD4 to 33 0.157 to 1.299

HYPR 3 to 35 0.118 to 1.378


W17 × H29 × D3.8

Alignment

FD-L22A R2

Bending durability

2 m

STD0 to 24 0 to 0.945

HYPR 0 to 31 0 to 1.220

0 to 28 0 to 1.1020 to 27 0 to 1.0630 to 24 0 to 0.9450 to 18 0 to 0.709

W18 × H29 × D3.8

Seating confirmation

FD-L23 3 m

STD0 to 29 0 to 1.142

HYPR 0 to 30 0 to 1.181

0 to 30 0 to 1.1810 to 30 0 to 1.1810 to 28 0 to 1.102

1.5 to 24 0.059 to 0.945

−20 to +70 °C

FD-L11 R4

Bending durability

2 m

STD0 to 9.5 0 to 0.374

HYPR 0 to 11.5 0 to 0.453

0 to 10.5 0 to 0.4130 to 10 0 to 0.394

0 to 9 0 to 0.3540 to 8 0 to 0.315

−40 to +60 °C

FD-L10 STD0 to 5 0 to 0.197

HYPR 0 to 6 0 to 0.236

0 to 5.5 0 to 0.2170 to 5.5 0 to 0.2170 to 4.5 0 to 0.177

0 to 4 0 to 0.157

FD-L21 R2

Bending durability

STD1.5 to 16 0.059 to 0.630

HYPR 1 to 19 0.039 to 0.748


FD-L21W R1STD

3 to 14 0.118 to 0.551HYPR

1.5 to 15 0.059 to 0.591

2 to 15 0.079 to 0.5912 to 15 0.079 to 0.5914 to 14 0.157 to 0.551

6.5 to 10 0.256 to 0.394

Gen

eral

pu

rpos

e

FD-L20H R2

Bending durability

STD23 0.906

HYPR 45 1.772

35 1.378 32 1.260

2 to 15 0.079 to 0.5915 to 9 0.197 to 0.354

−40 to +70 °C

Ultl

a-sm

all

FD-L12W R1 1 m

STD8 0.315

HYPR 14 0.551

12.5 0.492 12 0.472

0.5 to 7 0.020 to 0.2760.5 to 4 0.020 to 0.157

IP30 −40 to +60 °C

Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The sensing range is specified for transparent glass 100 × 100 × t0.7 mm 3.937 × 3.937 × t0.028 in (FD-L32H: R edge, FD-L21 and FD-L21W: t2 mm

t0.079 in) (FD-L20H: white non-glossy paper, FD-L10: silicon wafers 100 × 100 mm 3.937 × 3.937 in).

W25 × H7.3 × D30

Mapping

W20 × H29 × D3.8

Alignment

W23.5 × H29 × D4.5

Alignment

W12 × H19 × D3


W12 × H19 × D3


W24 × H21 × D4

W24 × H21 × D4

W6 × H18 × D14

W7.2 × H7.5 × D2



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS


LIST OF FIBERS




Bendingradius(mm)

Fiber cablelength

: Free-cut



U-LGLONGFASTH-SP

With

po

lariz

ing

filte

rs

FR-Z50HW R1

2 m

STD100 to 990 3.937 to 38.976

HYPR 100 to 1,900 3.937 to 74.803

100 to 1,400 3.937 to 55.118100 to 1,200 3.937 to 47.244

100 to 780 3.937 to 30.709100 to 490 3.937 to 19.291

IP40 −25 to +55 °C

P.58

Waf

er m

appi

ng

Apertureangle 3°(emitter)

W4 × H2 × D21.5

W7.5 × H2.2 × D11.2

FR-KZ22E


STD15 to 310 0.591 to 12.205

HYPR 15 to 570 0.591 to 22.441

15 to 460 0.591 to 18.11015 to 410 0.591 to 16.142

15 to 220 0.591 to 8.66115 to 100 0.591 to 3.937

IP30 −40 to +60 °C

Nar

row

bea

m

Top s

ensin

g

FR-KZ50H STD20 to 300 0.787 to 11.811

HYPR 20 to 1,000 0.787 to 39.370


Side

sens

ing

FR-KZ50E

W5.2 × H9.5 × D16

W30 × H30 × D0.5

W10.6 × H28 × D10.1

W5.2 × H9.5 × D21

W28 × H10.6 × D10.1

W9.5 × H25 × D5.2

Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. The sensing range of FR-KZ22E is specified for the attached reflector. The sensing range of FR-KZ50E and FR-KZ50H is specified for the attached reflector RF-003. The sensing range of FR-Z50HW is specified for the RF-13.

2) The sensing range is the possible setting range for the attached reflector. The fiber can detect an object less than setting range for the reflector. However, note that if there are any white or highly-reflective surfaces near the fiber head, reflected incident light may affect the fiber head. If this occurs, adjust the threshold value of the amplifier unit before use.

Note: The sensing range is the possible setting range for the reflector. The fiber can detect an object less than 100 mm 3.937 in. However, note that if there are any white or highly-reflective surfaces near the fiber head, reflected incident light may affect the fiber head. If this occurs, adjust the threshold value of the amplifier unit before use.

Reflectormodel No.

Sensing range (mm in)FX-500 series

HYPR U-LG LONG STD FAST H-SP

RF-230 100 to 19,0003.937 to 748.030

100 to 8,0003.937 to 314.960

100 to 5,0003.937 to 196.850

100 to 3,6003.937 to 141.732

100 to 2,9003.937 to 114.173

100 to 1,4003.937 to 55.118

RF-220 100 to 8,0003.937 to 314.960

100 to 4,7003.937 to 185.039

100 to 3,5003.937 to 137.795

100 to 3,0003.937 to 118.110

100 to 1,8003.937 to 70.866

100 to 8303.937 to 32.677

RF-210 100 to 5,5003.937 to 216.535

100 to 2,7003.937 to 106.299

100 to 2,4003.937 to 94.488

100 to 1,5003.937 to 59.055

100 to 1,2003.937 to 47.244

100 to 5303.937 to 20.866

Sensing range when FR-Z50HW is used in combination with a reflector (optional)



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

Chemical / oil-resistant

LIST OF FIBERS




Bendingradius(mm)

Fiber cablelength

: Free-cut



U-LGLONGFASTH-SP

Oil-

resi

stan

tS

quar

e he

ad ty

peM

4

Cable-protection typeCompatible with lens

FT-R44YR4

Bending durability

2 m

STD720 28.346

HYPR 3,000 118.110

1,600 62.9921,100 43.307

430 16.929130 5.118

ø1 IP67(Note 4)

−55 to +80 °C

P.55

M6

Full-protection type

FT-R60YSTD

2,100 82.677HYPR

3,600 141.732 (Note 2)

3,600 141.732(Note 2)3,600 141.732(Note 2)

1,260 49.606400 15.748

ø3.5

IP68G

−55 to +80 °C

Che

mic

al-r

esis

tant

Flat

type

FT-Z802YR4

Bending durability

2 m

STD3,100 122.047

HYPR 3,600 141.732 (Note 2)

3,600 141.732(Note 2) 3,600 141.732(Note 2)

1,900 74.803 470 18.504

ø3.7

0 to +60 °C P.57

Cyl

indr

ical

type

FT-HL80Y

R30 2 m(Note 3)

STD3,600 141.732

HYPR 3,600 141.732 (Note 2)

(Note 2)3,600 141.732(Note 2) 3,600 141.732(Note 2)

2,300 90.551 740 29.134

−40 to +115 °C P.53

Metal-free

FT-L80YSTD

3,600 141.732HYPR

3,600 141.732 (Note 2)

(Note 2)3,600 141.732(Note 2) 3,600 141.732(Note 2)

2,800 110.236 920 36.220

−40 to +70 °C

P.54

FT-V80Y

STD1,300 51.181

HYPR 3,600 141.732 (Note 2)

2,800 110.236 2,200 86.614

800 31.496 240 9.449

ø2.8 P.56

Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The fiber cable length practically limits the sensing range. 3) The allowable cutting range is 500 mm 19.685 in from the end that the amplifier inserted. 4) The fiber part is oil-resistant.

Reflective type


Bendingradius(mm)

Fiber cablelength

: Free-cut

Sensing range (mm in) (Note 1, 2)Beam axis dia.(mm)


U-LGLONGFASTH-SP

Oil-r

esist

ant

Squar

e head

type

M6

Cable-protection type

FD-R61YR4

Bending durability

2 m

STD280 11.024

HYPR 990 38.976

610 24.016435 17.126

160 6.29950 1.969

— IP67(Note 3)

−55 to +80 °C P.66

Chem

ical-re

sistan

tC

ylin

dric

al

type

Metal-free

FD-S60Y

Protective tubeR30 mm Fiber


2 m(Note 4)

STD320 12.598

HYPR 600 23.622

590 23.228420 16.535

200 7.87475 2.953

— IP68G −40 to +70 °C P.67

Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending on how the fiber is cut. 2) The sensing range is specified for white, non-glossy paper. 3) The fiber part is oil-resistant. 4) The allowable cutting range is 500 mm 19.685 in from the end that is inserted to the amplifier.

W7 × H9.5 × D15.5

W10 × H11 × D21.2

Metal-free

Easy mounting • Rectangular headSEMI S2 compliantW7 × H15 × D13

Heat-resistant 115 °CMetal-free

ø5.5

(25)

ø5.5

(25)

Side-viewMetal-free

ø5.5

(25)

W10 × H11 × D15.5

ø5.5

16



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Heat-resistant

LIST OF FIBERS


TypeHeat-resistant temp.

Shape of fiber head(mm) Model No.

Bendingradius(mm)

Fiber cablelength

: Free-cut


Ambient temp. DimensionsFX-500 series

U-LGLONGFASTH-SP

Hea

t-res

ista

nt

350 °C

FT-H35-M2 R25

2 mSTD

430 16.929HYPR

1,200 47.244

880 34.646 670 26.378 250 9.843 80 3.150

ø1.2 −60 to +350 °C

P.53

FT-H35-M2S6

FiberR25

SleeveR10

200 °C

FT-H20W-M1 R101 m

STD470 18.504

HYPR 1,600 62.992 (Note 2)

1,000 39.370 840 33.071 300 11.811

90 3.543 ø0.8

−60 to +200 °C

FT-H20-M1

R25

STD540 21.260

HYPR 1,600 62.992 (Note 2)

1,300 51.181 960 37.795 330 12.992

110 4.331 ø1.2

130 °C FT-H13-FM2 2 m

STD700 27.559

HYPR 3,300 129.921

1,900 74.803 1,300 51.181

410 16.142 140 5.512

ø1.5 −60 to +130 °C P.52

Hea

t-res

ista

nt (j

oint

)

200 °C

FT-H20-J20-S(Note 5)

Heat-resistant

sideR18

(Note 4)

200 mm(Note 3)

STD470 18.504

HYPR 1,600 62.992

1,000 39.370 790 31.102 300 11.811

90 3.543

ø1.2 −60 to +200 °C P.53

FT-H20-J30-S(Note 5) 300 mm

(Note 3)

FT-H20-J50-S(Note 5)

500 mm(Note 3)

ø3.8

ø424

FT-H20-VJ50-S(Note 5) STD

600 23.622HYPR

2,100 82.677

1,300 51.181 980 38.583 390 15.354

120 4.724 FT-H20-VJ80-S(Note 5) 800 mm

(Note 3)

Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The fiber cable length practically limits the sensing range. 3) Fiber length (fixed-length) for heat-resistant fiber side. Fiber length for ordinary temperature side is 2 m 6.562 ft (free-cut). 4) Bending durable fiber R4 mm R0.157 in or more for ordinary temperature side. 5) Heat-resistant joint fibers and ordinary-temperature fibers (FT-42) are sold as a set.

M4

30

Lens mountable (FX-LE1/LE2/SV1)

Sleeve 60 mmSleeve 60 mmM4

ø2.1 27

M4

Allows flexible wiringLens mountable (FX-LE1/LE2/SV1)

23Lens mountable (FX-LE1/LE2/SV1) M4

23

M4

16

Lens mountable (FX-LE2 only)

M4

23

Lens mountable(FX-LE1/LE2/SV1)

Side-view

Ordinary temperature side fiber [FT-42(Fiber cable length 2m, Free-cut)]

Heat-resistant side (–60 to +200 °C –76 to +392 °F)

100 mm 3.937 inapprox.

Ordinary temperature(–40 to +70 °C –40 to +158 °F)

Ordinary temperature side

Heat-resistant side fiber Nut (resin)

Nut (metal), Use when securing to a mounting bracket.

Fiber amplifiers

Heat-resistant joint fiber set contents

Model No. when ordering individually as spare parts• Heat-resistant side fiber one pair set

FT-H20-J20, FT-H20-J30, FT-H20-J50, FT-H20-VJ50, FT-H20-VJ80

• Ordinary temperature side fiber one pair setFT-42



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

Reflective type

TypeHeat-resistant temp.

Shape of fiber head(mm) Model No.

Bendingradius(mm)

Fiber cablelength

: Free-cut



U-LGLONGFASTH-SP

Hea

t-res

ista

nt

Thre

aded

350 °C

FD-H35-M2 R25

2 mSTD

260 10.236HYPR

720 28.346

540 21.260 460 18.110 150 5.906

45 1.772 −60 to

+350 °C P.64FD-H35-M2S6 FiberR25

Sleeve

R10FD-H35-20S

1 m

STD260 10.236

HYPR 840 33.071

550 21.654 440 17.323

140 5.512 45 1.772

200 °C

FD-H20-M1

R25

STD330 12.992

HYPR 840 33.071

550 21.654 500 19.685

200 7.874 55 2.165 −60 to

+200 °C

P.63FD-H20-21STD

230 9.055HYPR

770 30.315

500 19.685 380 14.961

130 5.118 45 1.772

130 °C FD-H13-FM2 2 m

STD350 13.780

HYPR 880 34.646

640 25.197 600 23.622

200 7.874 65 2.559

−60 to +130 °C

Glas

s sub

strat

e de

tecti

on co

nver

gent

refle

ctive

300 °C FD-H30-L32 2 mSTD

17 0.669HYPR

40 1.575

30 1.181 25 0.984 12 0.472

1.5 to 6 0.059 to 0.236

−60 to +300 °C P.64

250 °C

FD-H25-L43

3 m

STD1.5 to 26 0.059 to 1.024

HYPR 1 to 31 0.039 to 1.220

1 to 30 0.039 to 1.1811 to 28 0.039 to 1.102

1.5 to 24 0.059 to 0.9452 to 18 0.079 to 0.709

−20 to +250 °COrdinary

temp. side: −20 to +70 °C

P.63FD-H25-L45STD

5 to 42 0.197 to 1.654HYPR

4 to 43.5 0.157 to 1.713

4 to 43 0.157 to 1.6934.5 to 43 0.177 to 1.693

5 to 40 0.197 to 1.5756.5 to 34 0.256 to 1.339

180 °C FD-H18-L31 2 m

STD16 0.630

HYPR 60 2.362

32 1.260 24 0.945 13 0.512

2 to 6.5 0.079 to 0.256

−60 to +180 °C

M6

25

Coaxial

M6 ø2.8

22

Sleeve 60 mm

ø2.1

M4

27

Sleeve 90 mm

M6

28

Coaxial

M4

27

Coaxial

M6

21

W19 × H27 × D5

W21 × H33.2 × D5

W21 × H34.5 × D5

W19 × H27 × D5

Heat-resistant

LIST OF FIBERS

Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 2) The sensing range of reflective type is the value for white non-glossy paper (50 × 50 mm 1.969 × 1.969 in glass substrate for FD-H30-L32 and FD-H18-L31, transparent glass 100 × 100 × t0.7 mm 3.937 × 3.937 × t0.028 in for FD-H25-L43 and FD-H25-L45).



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Vacuum-resistant

LIST OF FIBERS



Bendingradius(mm)

Fiber cablelength

Sensing range (mm in)Beam axis dia.(mm)


U-LGLONGFASTH-SP

Vac

uum

-re

sist

ant

Thru

-bea

m

FT-H30-M1V-S(Note)

R18 1 mSTD

270 10.630HYPR

1,000 39.370

590 23.228 470 18.504

160 6.299 55 2.165

ø1.2 −30 to +300 °C P.53

Note: Sold as a set comprising vacuum type fiber + photo-terminal (FV-BR1) + fiber at atmospheric side (FT-J8).

Reflective type


Bendingradius(mm)

Fiber cablelength

Sensing range (mm in)(Note 2)


U-LGLONGFASTH-SP

Vac

uum

-res

ista

nt

Refl

ectiv

e

FD-H30-KZ1V-S(Note 1)

R18

1 mSTD

20 to 200 0.787 to 7.874HYPR

5 to 500 0.197 to 19.685

10 to 340 0.394 to 13.38615 to 270 0.591 to 10.630

20 to 120 0.787 to 4.72420 to 45 0.787 to 1.772 −30 to

+300 °C P.64

Conv

erge

nt

refle

ctive

FD-H30-L32V-S(Note 1)

3 mSTD8 0.315HYPR 18 0.709

12 0.472 10 0.394 5.5 0.217

1.5 to 3 0.059 to 0.118

Notes: 1) Sold as a set comprising vacuum type fiber + photo-terminal (FV-BR1) + fiber at atmospheric side (FT-J8). 2) The sensing range of reflective type is the value for transparent glass 100 × 100 × t0.7 mm 3.937 × 3.937 × t0.028 in.

M4

30

300 °CLens mountable (FV-LE1/SV2)

W9.5 × H5.2 × D15

300 °C, Rectangular head

W19 × H5 × D27

300 °C, Glass substrate detection

Vacuum side Atmospheric side

Vacuum resistant fibers

Photo-terminals (FV-BR1)

Chamber wall or flange

(Recommended thickness: 3.0 to 20 mm 0.118 to 0.787 in)

Atmospheric side fiber (FT-J8)

Fiber amplifiers

Vacuum resistant fiberFT-H30-M1V (one pair set)FD-H30-KZ1VFD-H30-L32V

Photo-terminalFV-BR1 (one pair set)

Atmospheric side fiberFT-J8 (one pair set)

Mounting bracket for FD-H30-KZ1V(-S) MS-FD-2

Model No. when ordering individually as spare parts

Vacuum-resistant fiber set contents



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

Reflective type / Thru-beam type


Bendingradius(mm)

Fiber cablelength

: Free-cut

DescriptionProtection Ambient

temp. DimensionsFX-500 series(STD mode)

Con

tact

type

Liqu

id le

vel s

ensi

ng

Heat resistant 125 °CFluorine resin coating

ø6 FD-F8YProtective tube

R40FiberR15

2 m(Note 1)

ø6 mm ø0.236 inProtective tube: Fluorine resin, length 1,000 mm 39.370 in (not cuttable)Liquid surface not contacted: Beam received, Liquid surface contacted: Beam not received

IP68 −40 to +125 °C P.62

Heat resistant 105 °CFluorine resin coatingMetal-free

ø4FD-HF40Y(Note 2) Protective tube

R20Fiber

R102 m

ø4 mm ø0.157 inProtective tube: Fluorine resin, length 500 mm 19.685 in (cuttable)Liquid surface not contacted: Beam received, Liquid surface contacted: Beam not received

IP68G

−40 to +105 °C P.64

Heat resistant 70 °CFluorine resin coating throughout the fiberMetal-free

ø4FD-F41Y(Note 2)

ø4 mm ø0.157 inProtective tube: Fluorine resin, length 500 mm 19.685 in (cuttable)Liquid surface not contacted: Beam received, Liquid surface contacted: Beam not received

−40 to +70 °C

P.62

Liqu

id le

akde

tect

ion

SEMI S2 compliantW20 × H30 × D10

FD-F71 R4Bending durability 5 m

Liquid leak detectionLeak absent: Beam received, Leak present: Beam interruptedCompatible amplifire: FX500 series only

IP67 −20 to +60 °C

Pip

e-m

ount

able

type

Liqu

id le

vel s

ensi

ng

StandardW25 × H13 × D20 FD-F41

R10

2 m

Applicable pipe diameter: Outer dia. ø6 to ø26 mm ø0.236 to ø1.024 in transparent pipe [PVC (vinyl chloride), fluorine resin, polycarbonate, acrylic, glass, wall thickness 1 to 3 mm 0.039 to 0.118 in]Liquid absent: Beam received, Liquid present: Beam not received ― −40 to

+100 °CFor 1 mm thick PFA pipe

W25 × H13 × D20 FD-F4Applicable pipe diameter: Outer dia. ø6 to ø26 mm ø0.236 to ø1.024 in transparent pipe [PFA (fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in]Liquid absent: Beam received, Liquid present: Beam not received

Liqu

id s

ensi

ng

Mountable on pipe·array fiber

W6.5 × H28.3 × D17 FD-FA93 R4Bending durability

Applicable pipe diameter: Outer dia. ø8 mm ø0.315 in or more transparent pipe (When used with the tying bands: ø8 to ø80 mm ø0.315 to ø3.150 in) [PFA (fluorine resin), including translucent]Liquid absent: Beam received, Liquid present: Beam not received

IP40

−40 to +70 °C

SEMI S2 compliant

W23 × H20 × D17

FT-F93

Protective tube R20

Fiber


Applicable pipe diameter: Outer dia. ø3 to ø10 mm ø0.118 to ø0.394 in transparent pipe [PFA (fluorine resin) or equivalently transparent pipe, wall thickness 0.3 to 1 mm 0.012 to 0.039 in]Liquid absent: Beam not received, Liquid present: Beam receivedCompatible amplifire: FX500 series only

−40 to +60 °C P.52

MS-FD-F7-1 (SUS mounting bracket for FD-F71)

MS-FD-F7-2 (PVC mounting bracket for FD-F71)

Accessories for additional supply

Liquid leak / Liquid detection

LIST OF FIBERS

Designation Model No. DescriptionLiquid inflow prevention joint (Note)

MS-FX-01Y

App

licab

le fi

bers

FD-HF40YFD-F41Y

This joint suppresses false operations due to liquid slip-in from the top of the protective tube.

Protective tube extension joint (Note)

MS-FX-02Y The protective tube can be extended.

Fiber mounting joint(Note)

MS-FX-03Y The joint is used for mounting fibers on a tank.

Note: The joint internal ferrule (MS-FX-YF) is available as a spare part. A distorted ferrule may result in leakage.

Liquid inflow prevention joint• MS-FX-01Y

Protective tube extension joint• MS-FX-02Y

Fiber mounting joint• MS-FX-03YMS-FX-03YMS-FX-02YMS-FX-01Y

Union nut Union nut

Union nut

Union nut

Body

Body

Body

Ferrule (MS-FX-YF)Ferrule (MS-FX-YF)

Ferrule (MS-FX-YF)

Ferrule (MS-FX-YF)

MS-FX-03YMS-FX-02YMS-FX-01Y

Union nut Union nut

Union nut

Union nut

Body

Body

Body


Ferrule (MS-FX-YF)

Ferrule (MS-FX-YF)


Union nut Union nut

Union nut

Union nut

Body

Body

Body


Ferrule (MS-FX-YF)

Ferrule (MS-FX-YF)


Notes: 1) The allowable cutting range is 1,000 mm 39.370 in from the end that the amplifier inserted. 2) Liquid inflow prevention joint, protective tube extension joint, fiber mounting joint is available.



Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

FIBER OPTIONS

Model No. when ordering accessories additionally• RF-003 (Reflector for FR-KZ50E/KZ50H)• RF-13 (Reflective tape for FR-Z50HW)• FX-CT2 (Fiber cutter)• FX-CT3 (Fiber cutter for FD-H40Y/F41Y)• FX-AT2 (Attachment for fixed-length fiber, Orange)• FX-AT3 (Attachment for ø2.2 mm ø0.087 in fiber, Clear orange)• FX-AT4 (Attachment for ø1 mm ø0.039 in fiber, Black)• FX-AT5 (Attachment for ø1.3 mm ø0.051 in fiber, Gray)• FX-AT6 Attachment for ø1 mm ø0.039 in / ø1.3 mm ø0.051 in

mixed fiber, Black / Gray( )• MS-FD-2 (Fiber mounting bracket)

• FX-CT2

• FX-AT2 • FX-AT4• FX-AT3

• RF-13• RF-003

• FX-AT5 • FX-AT6

• MS-FD-2

• FX-CT3

LIST OF FIBERS

Refer to p.69~ for details of lens dimensions.

Lens (For reflective type fiber)

Designation Model No. Description

For r

eflec

tive

type

fibe

r

Pinpoint spot lens FX-MR1

Pinpoint spot of ø0.5 mm ø0.020 in. Enables detection of minute objects or small marks.• Distance to focal point: 6 ± 1 mm 0.236 ± 0.039 in • Applicable fibers: FD-42G, FD-42GW• Ambient temperature: —40 to +70 °C －40 to +158 °F (Note)

Zoom lens FX-MR2

Screw-indepth

Distance tofocal point

Spotdiameter

The spot diameter is adjustable from ø0.7 to ø2 mm ø0.028 to ø0.079 in according to how much the fiber is screwed in.• Applicable fibers: FD-42G, FD-42GW• Ambient temperature: －40 to +70 °C

－40 to +158 °F (Note)• Accessory: MS-EX3 (mounting bracket)

Sensing range for FX-500 series

Screw-in depth Distance to focal point Spot diameter

7 mm 18.5 mm approx. ø0.7 mm12 mm 27 mm approx. ø1.2 mm14 mm 43 mm approx. ø2.0 mm

Finest spot lens FX-MR3

Spot diameter


Extremely fine spot of ø0.15 mm ø0.006 in approx. achieved.• Applicable fibers:

FD-EG31, FD-EG30, FD-42G, FD-42GW, FD-32G, FD-32GX

• Ambient temperature: －40 to +70 °C －40 to +158 °F (Note)

Sensing range for FX-500 series

Fiber model No. Distance to focal point Spot diameter

FD-EG31 7.5 ±0.5 mm ø0.15 mm approx.FD-EG30 7.5 ±0.5 mm ø0.3 mm approx.

FD-42G/42GWFD-32G/32GX 7.5 ±0.5 mm ø0.5 mm approx.

Finest spot lens FX-MR6

Extremely fine spot of ø0.1 mm ø0.004 in approx. achieved.• Applicable fibers:

FD-EG31, FD-EG30, FD-42G, FD-42GW, FD-32G, FD-32GX

• Ambient temperature: －20 to +60 °C －4 to +140 °F (Note)

Sensing range for FX-500 seriesFiber model No. Distance to focal point Spot diameter

FD-EG31 7 ±0.5 mm ø0.1 mm approx.FD-EG30 7 ±0.5 mm ø0.2 mm approx.

FD-42G/42GWFD-32G/32GX 7 ±0.5 mm ø0.4 mm approx.

Zoom lensside-view type

FX-MR5

Screw-indepth

Spot diameter


FX-MR2 is converted into a side-view type and can be mounted in a very small space.• Applicable fibers: FD-42G, FD-42GW• Ambient temperature: －40 to +70 °C

－40 to +158 °F (Note)

Sensing range for FX-500 seriesScrew-in depth Distance to focal point Spot diameter

8 mm 13 mm approx. ø0.5 mm10 mm 15 mm approx. ø0.8 mm14 mm 30 mm approx. ø3.0 mm

Note: Refer to p.80 or p.85 for the ambient temperature of fibers to be used in combination.



FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

Type Spot diameter(mm in)(Note)


(mm in)(Note)

Lens FiberShape(mm in) Model No. Shape Emitting fiber


For S

quar

e he

ad M

3 re

flect

ive

fiber

Finest spotlens


7 ± 0.50.276 ± 0.020 FX-MR7

ø0.125 ø0.005 FD-R33EG

ø0.125 ø0.005 FD-EG31ø0.15 ø0.006

approx. ø0.175 ø0.007 FD-R34EG


ø0.25 ø0.010 FD-R32EG

ø0.25 ø0.010 FD-EG30


ø0.5 ø0.020 FD-R31G

ø0.5 ø0.020 FD-32G

ø0.5 ø0.020 FD-32GX

ø0.5 ø0.020 FD-42G

ø0.5 ø0.020 FD-42GW

Type Spot diameter(mm in)(Note)

Sensingrange

(mm in)(Note)

Lens Applicable fibersShape(mm in) Model No. Emitting fiber


For S

quar

e he

ad M

3 re

flect

ive

fiber

Zoom

lens

ø0.4 to ø2.0 ø0.016 to ø0.079 approx.

10 to 30 0.394 to1.181 FX-MR8

ø0.125 ø0.005 FD-R33EG, FD-EG31ø0.4 to ø2.2 ø0.016 to ø0.087 approx. ø0.175 ø0.007 FD-R34EGø0.5 to ø2.5 ø0.020 to ø0.098 approx. ø0.25 ø0.010 FD-R32EG, FD-EG30ø0.8 to ø3.5 ø0.031 to ø0.138 approx. ø0.5 ø0.020 FD-R31G, FD-32G, FD-32GX, FD-42G, FD-42GW

Par

alle

l lig

ht l

ens

ø4.0 ø0.157 approx. 0 to 300 to 1.181 FX-MR9

ø0.125 ø0.005 FD-R33EG, FD-EG31ø0.175 ø0.007 FD-R34EGø0.25 ø0.010 FD-R32EG, FD-EG30ø0.5 ø0.020 FD-R31G, FD-32G, FD-32GX, FD-42G, FD-42GW

15.30.602

ø5 ø0.197

150.591

ø5 ø0.197

ø5 ø0.197

100.394

Refer to p.69~ for details of lens dimensions.

Lens (For square head M3 reflective fiber)

FIBER OPTIONS




FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

FIBER OPTIONS Refer to p.69~ for details of lens dimensions.

Lens (For thru-beam type fiber)Designation Model No. Description

Expansion lens(Note 1)

FX-LE1

Increases the sensing range by 5 times or more.

• Ambient temperature: —60 to +350 °C —76 to +662 °F (Note 4) • Beam dia: ø3.6 mm

ø0.142 in

Sensing range (mm in) [Lens on both sides] ModeFiber HYPR U-LG LONG STD FAST H-SP

FT-43 3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

1,60062.992

FT-42FT-42W

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

2,20086.614

FT-45X 1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,50059.055

FT-R40 3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

1,90074.803

FT-R43 3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

1,90074.803

67026.378

FT-H35-M2 3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,300129.921

1,40055.118

FT-H20W-M1 1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

85033.465

FT-H20-M1 1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,20047.244

FT-H20-J50-SFT-H20-J30-SFT-H20-J20-S

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,500137.795

2,00078.740

1,60062.992

50019.685

Super-expansion lens(Note 1)

FX-LE2

Tremendously increases the sensing range with large diameter lenses.

• Ambient temperature: —60 to +350 °C —76 to +662 °F (Note 4)

• Beam dia: ø9.8 mm ø0.386 in

Sensing range (mm in) [Lens on both sides] ModeFiber HYPR U-LG LONG STD FAST H-SPFT-43FT-42FT-42W

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

FT-45X 1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

FT-R40 3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

FT-R43 3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

FT-H35-M2 3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

FT-H20W-M1FT-H20-M1

1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

FT-H13-FM2 3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)


3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

Side-view lens FX-SV1

Beam axis is bent by 90°.

• Ambient temperature: —60 to +300 °C —76 to +572 °F (Note 4)

• Beam dia: ø2.8 mm ø0.110 in

Sensing range (mm in) [Lens on both sides] ModeFiber HYPR U-LG LONG STD FAST H-SP

FT-43 3,600141.732 (Note 2)

3,400133.858

2,600102.362

1,70066.929

97038.189

31012.205

FT-42 3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,600141.732 (Note 2)

2,10082.677

1,15045.276

37014.567

FT-42W 3,600141.732 (Note 2)

3,500137.795

2,700106.299

1,80070.866

99038.976

32012.598

FT-45X 1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,40055.118

80031.496

2108.268

FT-R43 3,200125.984

1,80070.866

1,30051.181

95037.402

51020.079

1606.299

FT-H35-M2 3,500137.795

1,60062.992

1,20047.244

78030.709

50019.685

1505.906

FT-H20W-M1 1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,50059.055

95037.402

56022.047

1907.480

FT-H20-M1 1,60062.992 (Note 2)

1,60062.992 (Note 2)

1,30051.181

78030.709

50019.685

1505.906


1,60062.992 (Note 2)

96037.795

74029.134

45017.717

29011.417

803.150

Expansion lens for vacuum fiber(Note 1)

FV-LE1

Sensing range increases by 4 times or more. • Ambient temperature: —60 to +350 °C —76 to +662 °F (Note 4) • Beam dia: ø3.6 mm ø0.142 in

Sensing range (mm in) [Lens on both sides] (Note 3) ModeFiber HYPR U-LG LONG STD FAST H-SP

FT-H30-M1V-S 3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,400133.858

1,50059.055

90035.433

37014.567

Vacuum-resistant side-view lens(Note 1)

FV-SV2

Beam axis is bent by 90°.• Ambient temperature: —60 to +300 °C —76 to +572 °F (Note 4) • Beam dia: ø3.7 mm ø0.146 in

Sensing range (mm in) [Lens on both sides] (Note 3) ModeFiber HYPR U-LG LONG STD FAST H-SP

FT-H30-M1V-S 3,600141.732 (Note 2)

3,600141.732 (Note 2)

3,400133.858

1,50059.055

90035.433

37014.567

Notes: 1) Be careful sure to use it only after you have adjusted it sufficiently when installing the thru-beam type fiber equipped with the expansion lens, as the beam envelope becomes narrow and alignment is difficult.

2) The fiber cable length practically limits the sensing range.3) The fiber cable length for the FT-H30-M1V-S is 1 m 3.28 ft. The sensing ranges in HYPR, U-LG and LONG of FX-500 series are specified considering

the length of the FT-J8 atmospheric side fiber.4) Refer to p.79, p.81, p.92, and p.94 for the ambient temperature of fibers to be used in combination.



FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

Others

FIBER OPTIONS

Protective tube

Universal sensor mounting standUsing the arm which enables adjustment in the horizontal direction, sensing can also be done from above an assembly line.

Fiber bender•FB-1

•MS-AJ1-F

•MS-AJ2-F

360° rotation

360° rotation

Angle adjustment: ±20° 20°

20°

Height adjustment: 150 mm 5.906 in approx.

Mounting hole for M6 screw

Forward / backadjustment:130 mm5.118 in approx.

360° rotation

360°rotation

Angle adjustment: ±20°20°

20° Mounting holefor M6 screw

Forward / backadjustment:130 mm5.118 in approx.

Heightadjustment:150 mm 5.906 inapprox.

•FTP-•FDP-Designation Model No. Description

Protective tubefor thru-beam type fiber

FTP-500 (0.5 m 1.640 ft)For M4 thread

App

licab

le fi

bers

FT-42FT-42SFT-42W

FT-43FT-H13-FM2

The protective tube, made of non-corrosive stainless steel, protects the inner fiber cable from any external forces.

FTP-1000 (1 m 3.281 ft)

FTP-1500 (1.5 m 4.921 ft)

FTP-N500 (0.5 m 1.640 ft)For M3 thread

FT-31FT-31SFT-31W

FD-31FD-31WFTP-N1000 (1 m 3.281 ft)

FTP-N1500 (1.5 m 4.921 ft)

Protective tubefor reflective type fiber

FDP-500 (0.5 m 1.640 ft)For M6 thread

FD-61FD-61GFD-61SFD-61W

FD-62FD-H13-FM2FDP-1000 (1 m 3.281 ft)

FDP-1500 (1.5 m 4.921 ft)

FDP-N500 (0.5 m 1.640 ft)For M4 thread

FD-41FD-41W

FD-41SFD-41SWFDP-N1000 (1 m 3.281 ft)

FDP-N1500 (1.5 m 4.921 ft)

Fiber bender FB-1 The fiber bender bends the sleeve part of the fiber head at the proper radius. (Note 1)

Universal sensor mounting stand(Note 2)

MS-AJ1-F Horizontal mounting type Mounting stand assembly for fiber (For M3, M4 or M6 threaded head fiber)MS-AJ2-F Vertical mounting type

Liquid inflow prevention joint (Note 2)

MS-FX-01Y

App

licab

le fi

bers

FD-HF40YFD-F41Y

This joint suppresses false operations due to liquid slip-in from the top of the protective tube.

Protective tube extension joint (Note 2)

MS-FX-02Y The protective tube can be extended.

Fiber mounting joint(Note 2)

MS-FX-03Y The joint is used for mounting fibers on a tank.

Single core holder FX-AT15A

The incident light intensity may vary when using a multi-core fiber or a thin type sharp bending fiber. This holder suppresses the variation in the incident light intensity. (Brown)

Reflector

RF-210Used with FR-Z50HW. Refer to p.90 for the sensing range when FR-Z50HW is used in combination with a reflector.

RF-220

RF-230

Notes: 1) Do not bend the sleeve part of any side-view type fiber or ultra-small diameter head type fiber. 2) The joint internal ferrule (MS-FX-YF) is available as a spare part. A distorted ferrule may result in leakage.

Single core holder

• FX-AT15A

Liquid inflow prevention joint• MS-FX-01Y


Union nut Union nut

Union nut

Union nut

Body

Body

Body


Ferrule (MS-FX-YF)

Ferrule (MS-FX-YF)

Protective tube extension joint• MS-FX-02Y


Union nut Union nut

Union nut

Union nut

Body

Body

Body


Ferrule (MS-FX-YF)

Ferrule (MS-FX-YF)

Fiber mounting joint• MS-FX-03Y


Union nut Union nut

Union nut

Union nut

Body

Body

Body


Ferrule (MS-FX-YF)

Ferrule (MS-FX-YF)

• RF-210

1.311 in33.3 mm 0.433 in

11 mm

12.8mm0.504 in

•RF-220

1.390 in35.3 mm

8.3 mm

42.3 mm1.665 in

0.327 in1.980 in50.3 mm

0.327 in8.3 mm

59.3 mm2.335 in

•RF-230

Reflector



FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

SPECIFICATIONS

Type Standard type 2-output type Cable type (Analog output type)

Mode

l No. NPN output FX-501 FX-502 FX-505-C2

Item PNP output FX-501P FX-502P FX-505P-C2Supply voltage 12 to 24 V DC+10

-15 % Ripple P-P 10 % or less

Power consumption Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output of cable type)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output of cable type)

Output(2-output type and cable type: Output 1, Output 2)

<NPN output type>NPN open-collector transistor• Maximum sink current: 100 mA

(2-output type and cable type are 50 mA) (Note 2)• Applied voltage: 30 V DC or less (between output and 0 V)• Residual voltage: 2 V or less (Note 3) (at maximum sink current)

<PNP output type>PNP open-collector transistor• Maximum source current: 100 mA

(2-output type and cable type are 50 mA) (Note 2)• Applied voltage: 30 V DC or less (between output and +V)• Residual voltage: 2 V or less (Note 3) (at maximum source current)

Output points 1 point 2 points

Output operation Switchable either Light-ON or Dark-ON by L/D mode

Short-circuit protection Incorporated

Response time H-SP: 25 μs or less, FAST: 60 μs or less, STD: 250 μs or less, LONG: 2 ms or less, U-LG: 4 ms or less, HYPR: 24 ms or less, selectable

Analog output (Cable type only) Output current: 4 to 20 mA approx. [H-SP, FAST, STD: At 0 to 4,000 digits, LONG: At 0 to 8,000 digits (Note 4)], Response time: 2 ms or less, Zero point: Within 4 mA ±1 % F.S., Span: Within 16 mA ±5 % F.S., Linearity: Within ±3 % F.S., Load resistance: 0 to 250 Ω

External input(2-output type only, switchable with Output 2)

–

Possible external input function – Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable

Sensitivity setting 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment

Incident light intensity display range H-SP / FAST / STD: 0 to 4,000, LONG: 0 to 8,000, U-LG / HYPR: 0 to 9,999

Timer function

Incorporated with variable OFF-delay / ON-delay /One-shot / ON OFF-delay / ON-delay • One-shot timer, switchable either effective or ineffective

<Output 1>Incorporated with variable OFF-delay / ON-delay /One-shot / ON OFF-delay / ON-delay • One-shot timer, switchable either effective or ineffective

<Output 2>Incorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective

Timer periodTimer range “ms”: 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx., Timer range “sec.”: 0.5 s approx., 1 to 32 s approx., 1 s approx., Timer range “1/10 ms”: 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx., each output is set individually

Light emitting amount selection function Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]

Interference prevention function Incorporated (Note 5), selectable either automatic interference prevention or different frequency

Various settings Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold tracking setting, etc.

Protection IP40 (IEC)

Ambient temperature −10 to +55 °C +14 to +131 °F [If 4 to 7 units are mounted in cascade: −10 to +50 °C +14 to +122 °F or if 8 to 16 units (cable type: 8 to 12 units) are mounted in cascade: −10 to +45 °C +14 to +113 °F] (No dew condensation or icing allowed), Storage: −20 to +70 °C −4 to +158 °F

Emitting element (modulated) Red LED (Peak emission wavelength: 643 nm 0.025 mil)

Material Enclosure, Case cover: Polycarbonate, Switch: TPEE

Cable – 0.2 mm2 6-core cabtyre cable, 2 m 6.562 ft long

Cable extension –Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC)

Weight Net weight: 15 g approx., Gross weight: 70 g approx. Net weight: 60 g approx., Gross weight: 100 g approx.

Accessory FX-MB1 (Amplifier protection seal): 1 set

<NPN output type>NPN non-contact input• Signal condition

High: +8 V to +V DC or OpenLow: 0 to +1.2 V DC

(at 0.5 mA source current)• Input impedance: 10 kΩ approx.

<PNP output type>PNP non-contact input• Signal condition

High: +4 V to +V DC (at 3 mA sink current)

Low: 0 to +0.6 V DC or Open• Input impedance: 10 kΩ approx.

Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)3) In case of using the quick-connection cable (cable length 5 m 16.404 ft) (optional).4) If display adjustment was conducted, it is not in this range.5) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.

Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units. Number of sensor heads mountable closely (Unit: set)

Response time H-SP FAST STD LONG U-LG HYPRIP-1 0 2 4 8 8 12



FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

+-

12 to 24 V DC %

Sen

sor c

ircui

t

1

3

2

Color code of quick-connection cableTerminal No.

(Brown) +V (Note 1)

(Black) Output

100 mA max. (Note 2)

Load

User’s circuitInternal circuit

(Blue) 0 V (Note 1)

+10-15

I/O CIRCUIT AND WIRING DIAGRAMS

I/O circuit diagram Wiring diagram

FX-501 NPN output type

Terminal arrangement diagramNotes: 1) The quick-connection sub cable does not have +V (brown) and 0 V

(blue). The power is supplied from the connector of the main cable.2) 50 mA max., if five amplifiers or more, are connected together.

Note: The quick-connection sub cable does not have a brown and a blue lead wire.

1

3

2

(Brown) +V (Note 1)

(Black) Output

(Blue) 0 V (Note 1)

100 mA max. (Note 2)

Load


+-


Sen

sor c

ircui

t

12 to 24 V DC %+10-15


Terminal arrangement diagram

1

3

2

4

Sen

sor c

ircui

t

(White) Output 2 / External input

50 mA max. (Note 2)


(Brown) +V (Note 1)

(Black) Output 1

50 mA max. (Note 2)

(Blue) 0 V (Note 1)


Load Load

+-

Externalinput

12 to 24 V DC %+10-15





+-

Externalinput

1

3

2

4

Sen

sor c

ircui

t


50 mA max. (Note 2)

Load Load

50 mA max. (Note 2)


(Brown) +V (Note 1)

(White) Output 2 / External input

(Black) Output 1

(Blue) 0 V (Note 1)

12 to 24 V DC %+10-15

FX-501P PNP output type


Notes: 1) The quick-connection sub cable does not have +V (brown) and 0 V (blue). The power is supplied from the connector of the main cable.

2) 50 mA max., if five amplifiers or more, are connected together.

FX-502 NPN output type






FX-502P PNP output type


Load

Brown (Note 1)

Black

Blue (Note 1)

Color code of quick-connection cable

+-

12 to 24 V DC %+10-15

Load

Brown (Note 1)

Black

Blue (Note 1)


+-

12 to 24 V DC %+10-15


+-

Load Load

Brown (Note 1)

White

Black

Blue (Note 1)Externalinput

12 to 24 V DC %+10-15

Brown (Note 1)

White

Black

Blue(Note 1) Load Load


+-

Externalinput

12 to 24 V DC %+10-15

+V

Output

0V

1

3

2

+V

Output

0V

1

3

2

+V

Output 1

0V

1

3

2 Output 2 / External input4

+V

Output 1

0V

1

3

2 Output 2 / External input4



FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

I/O CIRCUIT AND WIRING DIAGRAMS


FX-505-C2 NPN output type

FX-505P-C2 PNP output type


(Brown) +V

(Black) Output 1

(White) Output 2

Load

Internal circuit User’s circuit

(Blue) 0 V

Load

(Pink) External input

(Gray) Analog output (4 to 20 mA) (0 to 250 Ω)

+-

Load

Sen

sor c

ircui

t

12 to 24 V DC 10 15 %

Sen

sor c

ircui

t

Internal circuit User’s circuit

Load

Load

Load (0 to 250 Ω)

+-

(Brown) +V

(Pink) External input

(Blue) 0 V

(Gray) Analog output (4 to 20 mA)

(Black) Output 1

(White) Output 2 12 to 24 V DC 10 15 %

Brown

Black

White

Blue

Pink

Gray

+-

Color code

LoadLoad

(0 to 250 Ω)

12 to 24 V DC 10 15 %

Load

Pink

Black

White

Blue

Gray

Brown

Color code

LoadLoad

Load

+-

(0 to 250 Ω)

12 to 24 V DC 10 15 %



FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

SENSING CHARACTERISTICS (TYPICAL)

FT-140 Thru-beam type FT-30 Thru-beam type

FT-40 Thru-beam type

FT-31 Thru-beam type FT-31S Thru-beam type

FT-42 Thru-beam type

FTA187

H-SP

1,500 5001,000 0 500 1,000 1,500

10,000

5,000

15,000

20,000

STD

HYPR

ℓL

Fiberhead

Fiberhead

59.055 19.68539.370 19.685 39.370 59.055

0

393.700

196.850

590.550

787.400

Operating point ℓ (mm in)Center RightLeft

Set

ting

dist

ance

L (m

m in

)

FT-31W Thru-beam type

FT-43 Thru-beam typeFT-42W Thru-beam type FT-45X Thru-beam type

FT-42S Thru-beam type

FTA185

2,000 1,000 0 1,000 2,0000

2,000

1,000

1,500

500

2,500

3,000

78.740 39.370 39.370 78.740

78.740

39.370

59.055

19.685

98.425

118.110

STD

HYPR

H-SP ℓL

Fiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FTA225

400 200 0 200 400 600600

1,000

500

1,500

STD

H-SP

HYPR

ℓ

LFiberhead

Fiberhead

15.748 7.874 7.874 15.748 23.62223.622

0

39.370

19.685

59.055

Center RightLeftOperating point ℓ (mm in)

Set

ting

dist

ance

L (m

m in

)

FTA219

400600 200 0 400200 600 800800

500

1,000

1,500

15.74823.622 7.874 15.7487.874 23.622 31.49631.496

0

19.685

39.370

59.055

STD

H-SP

HYPR

ℓ

LFiberhead

Fiberhead

Center RightLeftOperating point ℓ (mm in)

Set

ting

dist

ance

L (m

m in

)

FTA186

600 400 200 0 400200 600

500

1,000

1,500

23.622 15.748 7.874 15.7487.874 23.622

0

19.685

39.370

59.055

STD

HYPR

H-SPℓ

LFiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FTA224

1,000 0 1,000 2,0002,000

2,000

1,000

3,000

4,000

39.370 39.370 78.74078.740

0

78.740

39.370

118.110

157.480

STD

H-SP

HYPR

ℓ

LFiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FTA179

1,500 5001,000 0 500 1,000 1,5000

2,000

1,000

3,000

4,000

59.055 19.68539.370 19.685 39.370 59.055

78.740

39.370

118.110

157.480 HYPR

STD

H-SP

ℓLFiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FTA183

2,000 1,000 0 1,000 2,00078.740

0

1,500

500

1,000

2,000

78.740 39.370 39.370

59.055

19.685

39.370

78.740

2,50098.425

H-SP

STD

HYPR

ℓ

LFiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FTA221

1,000 0 1,000 2,0002,000

500

2,500

1,500

2,000

1,000

3,000

3,500

39.370 39.370 78.74078.7400

19.685

98.425

59.055

78.740

39.370

118.110

137.795

STD

H-SP

HYPR

ℓ

LFiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FTA192

1,500 1,000 500 0 500 1,000 1,50059.055 39.370 19.685 19.685 39.370 59.055

0

500

1,500

19.685

1,00039.370

59.055

H-SP

STD

HYPR

ℓ

LFiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FT-A11 Thru-beam type FT-A11W Thru-beam type

Vertical direction Vertical directionHorizontal direction Horizontal direction

FTA162

STD

HYPR

H-SP

ℓ

Fiberhead

Fiberhead

L

0400 300 200 100 0 300100 200 400

3,000

2,000

1,000

4,000

15.748 11.811 7.874 3.937 11.8113.937 7.874 15.748

118.110

78.740

39.370

157.480


Set

ting

dist

ance

L (m

m in

)

FTA217

600 400 200 0 200 400 60023.622 15.748 7.874 7.874 15.748 23.622

3,000

2,000

1,000

4,000

0

118.110

78.740

39.370

157.480

STD

HYPR

H-SP

ℓ

Fiberhead

Fiberhead

L


Set

ting

dist

ance

L (m

m in

)

FTA162

0

STD

HYPR

H-SP

ℓ

Fiberhead

Fiberhead

L8mm

0.315in

400 300 200 100 0 300100 200 400

3,000

2,000

1,000

4,000

15.748 11.811 7.874 3.937 11.8113.937 7.874 15.748

118.110

78.740

39.370

157.480

Operating point ℓ (mm in)Center UpDown

Set

ting

dist

ance

L (m

m in

)

FTA217

600 200400 0 400200 60023.622 7.87415.748 15.7487.874 23.622

3,000

2,000

1,000

4,000

0

118.110

78.740

39.370

157.480

STD

HYPR

ℓ

Fiberhead

Fiberhead

L8mm

0.315in

H-SP


Set

ting

dist

ance

L (m

m in

)

FTA180

300 200 0 200100100 300

400

200

1,000

800

600

1,200

11.811 7.874 7.8743.9373.937 11.811

0

15.748

7.874

39.370

31.496

23.622

47.244 HYPR

STD

H-SP

ℓ

LFiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

Thru-beam type Parallel deviation Sensing characteristics are listed in the alphabetic order of Model No.



FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

SENSING CHARACTERISTICS (TYPICAL)Thru-beam type Parallel deviation Sensing characteristics are listed in the alphabetic order of Model No. (Models with same sensing characteristics are grouped together.)

FT-A32 Thru-beam type FT-A32W Thru-beam type

FTA216

300 200 100 0 100 200 30011.811 7.874 3.937 3.937 7.874 11.811

3,000

2,000

1,000

4,000

0

118.110

78.740

39.370

157.480

STD

HYPR

H-SP

ℓ

Fiberhead

Fiberhead

L


Set

ting

dist

ance

L (m

m in

)

FTA216

STD

HYPR

ℓ

Fiberhead

Fiberhead

L

H-SP

STD

HYPR

H-SP

300 200 100 0 100 200 30011.811 7.874 3.937 3.937 7.874 11.811

3,000

2,000

1,000

4,000

0

118.110

78.740

39.370

157.480


19mm0.748in

Set

ting

dist

ance

L (m

m in

)

FTA218

STDHYPR

H-SP

ℓ

Fiberhead

Fiberhead

L

300 200 100 0 100 200 30011.811 7.874 3.937 3.937 7.874 11.811

3,000

2,000

1,000

4,000

0

118.110

78.740

39.370

157.480


Set

ting

dist

ance

L (m

m in

)

FTA218

ℓ

Fiberhead

Fiberhead

L

STD

H-SP

HYPR

300 200 100 0 100 200 30011.811 7.874 3.937 3.937 7.874 11.811

3,000

2,000

1,000

4,000

0

118.110

78.740

39.370

157.480


19mm0.748in

Set

ting

dist

ance

L (m

m in

)

FT-AL05 Thru-beam type

FTA215

1,500 1,000 500 0 500 1,000 1,50059.055 39.370 19.685 19.685 39.370 59.055

1,500

1,000

500

2,000

2,500

0

59.055

39.370

19.685

78.740

98.425

ℓ

LFiberhead

Fiberhead

H-SP

HYPR

STD


Set

ting

dist

ance

L (m

m in

)

FTA215

HYPR

STD

H-SPLℓ

Fiberhead

Fiberhead

1,500 1,000 500 0 500 1,000 1,50059.055 39.370 19.685 19.685 39.370 59.055

1,500

1,000

500

2,000

2,500

0

59.055

39.370

19.685

78.740

98.425

36mm1.417in


Set

ting

dist

ance

L (m

m in

)

FT-E13 Thru-beam type

FTA222

STD

H-SP

HYPR

Lℓ

Fiberhead

Fiberhead

30 1020 0 10 20 301.181 0.3940.787 0.394 0.787 1.181


10

30

20

40

50

60

0

0.394

1.181

0.787

1.575

1.969

2.362

Set

ting

dist

ance

L (m

m in

)

FT-E23 Thru-beam type

FTA223

150 100 50 0 10050 1505.906 3.937 1.969 3.9371.969 5.906

0

100

150

50

200

250

300

3.937

5.906

1.969

7.874

9.843

11.811

STD

HYPR

H-SPL

ℓ

Fiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FT-H13-FM2 Thru-beam type

HYPR

STD

H-SP

1,000 500 0 500 1,000

2,000

1,000

3,000

4,000

39.370 19.685 19.685 39.370

0

78.940

39.370

118.110

157.480


ℓ

Fiberhead

Fiberhead

L

Set

ting

dist

ance

L (m

m in

)

FT-H20-J20-S FT-H20-J30-SFT-H20-J50-S

Thru-beam type

STD

HYPR

H-SP

800 400 0 400 800

1,000

500

1,500

2,000

31.496 15.748 15.748 31.496

0

39.370

19.685

59.055

78.740


ℓ

Fiberhead

Fiberhead

L

Set

ting

dist

ance

L (m

m in

)

FT-H20-VJ50-S FT-H20-VJ80-S Thru-beam type

FT-H20-M1 Thru-beam type

STD

HYPR

H-SP


1,000

500

1,500

2,000

0

39.370

19.685

59.055

78.740

2,000 1,000 0 1,000 2,00078.740 39.370 39.370 78.740

ℓ

Fiberhead

Fiberhead

L

Set

ting

dist

ance

L (m

m in

)

STD

HYPR

H-SP

400 200 0 200 40015.748 7.874 7.874 15.748

1,000

2,000

39.370

78.740

0


ℓ

Fiberhead

L

Fiberhead

Set

ting

dist

ance

L (m

m in

)

STD

HYPR

H-SP

400 200 0 200 40015.748 7.874 7.874 15.748

1,000

2,000

39.370

78.740

0

L


Fiber head

Fiber head

ℓ L

Set

ting

dist

ance

L (m

m in

)

FT-H20W-M1 Thru-beam type

STD

HYPR

H-SP

800 400 0 400 80031.496 15.748 15.748 31.496

1,000

500

1,500

2,000

0

39.370

19.685

59.055

78.740


ℓ

Fiberhead

Fiberhead

L

Set

ting

dist

ance

L (m

m in

)

FT-H30-M1V-S Thru-beam type

STD

HYPR

H-SP

500

1,000

19.685

39.370

0


ℓ

Fiberhead

Fiberhead

L

800 400 0 400 80031.496 15.748 15.748 31.496

Set

ting

dist

ance

L (m

m in

)

Vertical direction

Vertical direction

Vertical direction

Vertical direction

Horizontal direction






FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

SENSING CHARACTERISTICS (TYPICAL)Thru-beam type Parallel deviation Sensing characteristics are listed in the alphabetic order of Model No. (Models with same sensing characteristics are grouped together.)

FT-KV26 Thru-beam type FT-KV40 Thru-beam type

FTA209

STD

H-SP

HYPR

ℓ

LFiberhead

Fiberhead

80 4060 20 0 604020 803.150 1.5752.362 0.787 2.3621.5750.787 3.150

0

2,000

1,000

1,500

500

2,500

3,000

78.740

39.370

59.055

19.685

98.425

118.110


Set

ting

dist

ance

L (m

m in

)

FTA209

STD

H-SP

HYPR

ℓ

Fiberhead

Fiberhead

L

80 4060 20 0 604020 803.150 1.5752.362 0.787 2.3621.5750.787 3.1500

2,000

1,000

1,500

500

2,500

3,000

78.740

39.370

59.055

19.685

98.425

118.110


Set

ting

dist

ance

L (m

m in

)

FTA205

H-SP

HYPR

ℓ

LFiberhead

Fiberhead

STD3,000

2,000

1,000

4,000

0

118.110

78.740

39.370

157.480

100 50 0 50 1003.937 1.969 1.969 3.937


Set

ting

dist

ance

L (m

m in

)

FTA205

H-SP

HYPR

ℓ

Fiberhead

Fiberhead

L

STD3,000

2,000

1,000

4,000

0

118.110

78.740

39.370

157.480

100 50 0 50 1003.937 1.969 1.969 3.937


Set

ting

dist

ance

L (m

m in

)

FT-KV40W Thru-beam type

FTA206

H-SP

HYPR

ℓ

LFiberhead

Fiberhead

STD3,000

2,000

1,000

4,000

0

118.110

78.740

39.370

157.480

100 50 0 50 1003.937 1.969 1.969 3.937


Set

ting

dist

ance

L (m

m in

)

FTA206

H-SP

HYPR

ℓ

Fiberhead

Fiberhead

L

STD3,000

2,000

1,000

4,000

0

118.110

78.740

39.370

157.480

100 50 0 50 1003.937 1.969 1.969 3.937


Set

ting

dist

ance

L (m

m in

)

FT-R41W Thru-beam type FT-R42W Thru-beam type

FTA193

STD

HYPR

H-SPℓ

LFiberhead

Fiberhead

1,500 1,000 500 0 500 1,000 1,50059.055 39.370 19.685 19.685 39.370 59.055

500

2,500

1,500

2,000

1,000

3,000

3,500

0

19.685

98.425

59.055

78.740

39.370

118.110

137.795


Set

ting

dist

ance

L (m

m in

)

FTA194

H-SP

STD

HYPR

ℓL

Fiberhead

Fiberhead

3,000

2,000

1,000

4,000

0

118.110

78.740

39.370

157.480

1,000 500 0 500 1,00039.370 19.685 19.685 39.370


Set

ting

dist

ance

L (m

m in

)

FTA193

STD

HYPR

ℓL

Fiberhead

Fiberhead

H-SP

1,500 1,000 500 0 500 1,000 1,50059.055 39.370 19.685 19.685 39.370 59.055

500

2,500

1,500

2,000

1,000

3,000

3,500

0

19.685

98.425

59.055

78.740

39.370

118.110

137.795


Set

ting

dist

ance

L (m

m in

)

FTA194

H-SP

STD

HYPR

ℓL

Fiberhead

Fiberhead

3,000

2,000

1,000

4,000

0

118.110

78.740

39.370

157.480

1,000 500 0 500 1,00039.370 19.685 19.685 39.370


Set

ting

dist

ance

L (m

m in

)

FT-KS40 Thru-beam type

FTA208

STD

HYPR

H-SP

L

ℓ

Fiberhead

Fiberhead

3,000

2,000

1,000

4,000

0

118.110

78.740

39.370

157.480

100 50 0 50 1003.937 1.969 1.969 3.937


Set

ting

dist

ance

L (m

m in

)

FT-L80Y Thru-beam type FT-R40 Thru-beam type

FTA184

STD

H-SP

HYPR

ℓ

LFiberhead

Fiberhead

3,000

2,000

1,000

4,000

0

118.110

78.740

39.370

157.480

1,500 1,000 500 0 500 1,000 1,50059.055 39.370 19.685 19.685 39.370 59.055


Set

ting

dist

ance

L (m

m in

)

FT-H35-M2FT-H35-M2S6 Thru-beam type FT-HL80Y Thru-beam type

STD

HYPR

H-SP

1,000

500

1,500

2,000

0

39.370

19.685

59.055

78.740

1,000 500 0 500 1,00039.370 19.685 19.685 39.370


ℓ

Fiberhead

Fiberhead

LSet

ting

dist

ance

L (m

m in

)

STD

HYPR

H-SP

3,000

2,000

1,000

4,000

0

118.110

78.740

39.370

157.480

800 400 0 400 80031.496 15.748 15.748 31.496


ℓ

Fiberhead

Fiberhead

L

Set

ting

dist

ance

L (m

m in

)

STD

HYPR

H-SP

3,000

2,000

1,000

4,000

0

118.110

78.740

39.370

157.480

800 400 0 400 80031.496 15.748 15.748 31.496


ℓ

Fiberhead

Fiberhead

LSet

ting

dist

ance

L (m

m in

)

Vertical directionVertical direction

Vertical direction

Vertical direction Vertical direction

Horizontal directionHorizontal direction


Horizontal direction Horizontal direction



FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

SENSING CHARACTERISTICS (TYPICAL)Thru-beam type Parallel deviation Sensing characteristics are listed in the alphabetic order of Model No.

FT-R44Y Thru-beam type FT-R60Y Thru-beam type

FTA227

800 400 0 400 800 1,2001,200

2,000

1,000

3,000

31.496 15.748 15.748 31.496 47.24447.244

78.740

39.370

118.110

0

STD

H-SP

HYPR


Set

ting

dist

ance

L (m

m in

)

ℓL

Fiberhead

Fiberhead

FTA226

500 0 500 1,0001,00019.685 19.685 39.37039.370

2,000

1,000

3,000

4,000

0

78.740

39.370

118.110

157.480

STD

H-SP

HYPR


Set

ting

dist

ance

L (m

m in

)

ℓL

Fiberhead

Fiberhead

FTA227

800 400 0 400 800 1,2001,200

2,000

1,000

3,000

31.496 15.748 15.748 31.496 47.24447.244

78.740

39.370

118.110

0

STD

H-SP

HYPR

Set

ting

dist

ance

L (m

m in

)


ℓL

Fiberhead

Fiberhead

FTA226

500 0 500 1,0001,00019.685 19.685 39.37039.370

2,000

1,000

3,000

4,000

0

78.740

39.370

118.110

157.480

STD

H-SP

HYPR

Set

ting

dist

ance

L (m

m in

)


ℓL

Fiberhead

Fiberhead

Vertical directionVertical direction Horizontal directionHorizontal direction

FT-S11 Thru-beam type FT-S20 Thru-beam type

FT-S31W Thru-beam type

FT-S21 Thru-beam type

FT-S32 Thru-beam type

FT-S21W Thru-beam type

FTA178

150 50100 0 50 100 150

200

100

300

400

5.906 1.9693.937 1.969 3.937 5.906

0

7.874

3.937

11.811

15.748 HYPR

STD

H-SPL

ℓ

Fiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FT-S30 Thru-beam type FTA227

400 200 0 200 400 600600

1,000

500

1,500

15.748 7.874 7.874 15.748 23.62223.622

0

39.370

19.685

59.055

STD

H-SP

HYPR

L

ℓ

Fiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FTA220

400600 200 0 400200 600 8008000

500

1,000

1,500

15.74823.622 7.874 15.7487.874 23.622 31.49631.496

19.685

39.370

59.055

STD

H-SP

HYPR

L

ℓ

Fiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FTA182

300 200 0 200100100 300

400

200

1,000

800

600

1,200

11.811 7.874 7.8743.9373.937 11.811

0

15.748

7.874

39.370

31.496

23.622

47.244

STD

H-SP

HYPR

L

ℓ

Fiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FTA226

1,000 0 1,000 2,0002,000

2,000

1,000

3,000

4,000

39.370 39.370 78.74078.740

0

78.740

39.370

118.110

157.480

STD

H-SP

HYPR

L

ℓ

Fiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FTA177

1,000 500 0 500 1,000

2,000

1,000

3,000

4,000

39.370 19.685 19.685 39.370

0

78.740

39.370

118.110

157.480 HYPR

H-SP

STD

L

ℓ

Fiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FT-V23 Thru-beam type FT-V24W Thru-beam type

FTA190

800 600 400 200 0 200 400 600 800

1,000

500

1,500

2,000

31.496 23.622 15.748 7.874 7.874 15.748 23.622 31.496

0

39.370

19.685

59.055

78.740

STD

H-SP

HYPR

ℓ

LFiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FTA188

STD

200 100 0 100 2000

200

100

300

400

7.874 3.937 3.937 7.874

7.874

3.937

11.811

15.748

H-SP

HYPR

ℓ

LFiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FTA190

800 600 400 200 0 200 400 600 800

1,000

500

1,500

2,000

31.496 23.622 15.748 7.874 7.874 15.748 23.622 31.496

0

39.370

19.685

59.055

78.740

STD

H-SP

HYPR

ℓ

Fiberhead

Fiberhead

L


Set

ting

dist

ance

L (m

m in

)

FTA188

200 100 0 100 200

200

100

300

400

7.874 3.937 3.937 7.874

0

7.874

3.937

11.811

15.748

STD

H-SP

HYPR

ℓ

Fiberhead

Fiberhead

L


Set

ting

dist

ance

L (m

m in

)

FTA181

1,500 1,000 500 0 500 1,000 1,500

2,000

1,000

3,000

4,000

59.055 39.370 19.685 19.685 39.370 59.055

0

78.740

39.370

118.110

157.480

STD

H-SP

HYPR

Lℓ

Fiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)




FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F


FT-V40 Thru-beam type

FTA207

H-SP

HYPR

ℓ

LFiberhead

Fiberhead

300 200 100 0 100 200 300

2,000

1,000

3,000

4,000

11.811 7.874 3.937 3.937 7.874 11.811

0

78.740

39.370

118.110

157.480

STD


Set

ting

dist

ance

L (m

m in

)

FTA207

H-SP

HYPR

ℓ

Fiberhead

Fiberhead

L

300 200 100 0 100 200 300

2,000

1,000

3,000

4,000

11.811 7.874 3.937 3.937 7.874 11.811

0

78.740

39.370

118.110

157.480

STD


Set

ting

dist

ance

L (m

m in

)

FT-Z20HBW Thru-beam type

FTA203

600 400 200 0 400200 600

600

800

200

400

1,000

1,200

23.622 15.748 7.874 15.7487.874 23.6220

23.622

31.496

7.874

15.748

39.370

47.244

STD

HYPR

ℓ

Fiberhead

Fiberhead

LH-SP


Set

ting

dist

ance

L (m

m in

)

FT-Z20W Thru-beam type

FT-Z30 Thru-beam typeFTA294

STD

HYPR

400 200300 100 0 300200100 400

500

1,000

1,500

2,000

15.748 7.87411.811 3.937 11.8117.8743.937 15.748

0

19.685

39.370

59.055

78.740

H-SP

ℓ

Fiberhead

Fiberhead

L


Set

ting

dist

ance

L (m

m in

)

FTA198

1,000 500 0 500 1,000

2,000

1,000

3,000

4,000

39.370 19.685 19.685 39.370

0

78.740

39.370

118.110

157.480

H-SP

STD

HYPR

ℓ

Fiberhead

Fiberhead

L2.2mm0.087in


Set

ting

dist

ance

L (m

m in

)

FTA294

STD

HYPR

400 200300 100 0 300200100 400

500

1,000

1,500

2,000

15.748 7.87411.811 3.937 11.8117.8743.937 15.748

0

19.685

39.370

59.055

78.740

H-SP

1.2mm0.047in

Fiberhead

Fiberhead

Lℓ


Set

ting

dist

ance

L (m

m in

)

FTA198

1,000 500 0 500 1,000

2,000

1,000

3,000

4,000

39.370 19.685 19.685 39.370

0

78.740

39.370

118.110

157.480

H-SP

STD

HYPR

ℓ

Fiberhead

Fiberhead

L5.5mm0.217in


Set

ting

dist

ance

L (m

m in

)

FT-Z30E Thru-beam type

FTA163

300 200 100 0 200100 300

3,000

2,000

1,000

4,000

11.811 7.874 3.937 7.8743.937 11.811

0

118.110

78.740

39.370

157.480

STD

HYPR

H-SP

ℓ

Fiberhead

Fiberhead

L


Set

ting

dist

ance

L (m

m in

)

FTA163

300 200 100 0 200100 300

3,000

2,000

1,000

4,000

11.811 7.874 3.937 7.8743.937 11.811

0

118.110

78.740

39.370

157.480

STD

HYPR

H-SP ℓ

Fiberhead

Fiberhead

L5.5mm0.217in


Set

ting

dist

ance

L (m

m in

)

FT-V80Y Thru-beam type

800 400 0 400 800

2,000

1,000

3,000

4,000

31.496 15.748 15.748 31.496

0

78.740

39.370

118.110

157.480

STD

HYPR

H-SP


ℓ

Fiber head

Fiber head

LSet

ting

dist

ance

L (m

m in

)

800 400 0 400 800

2,000

1,000

3,000

4,000

31.496 15.748 15.748 31.496

0

78.740

39.370

118.110

157.480

STD

HYPR

H-SP

Fiber head

Fiber head

ℓ


LS

ettin

g di

stan

ce L

(mm

in)

Vertical direction

Vertical direction

Vertical direction

Vertical direction

Vertical direction



FT-V25 Thru-beam type FT-V30 Thru-beam type

FTA189

300 100200 0 100 200 300

400

200

600

800

1,000

11.811 3.9377.874 3.937 7.874 11.811

0

15.748

7.874

23.622

31.496

39.370

STD

H-SP

HYPR

ℓ

LFiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FTA191

1,000 1,000500 0 500

1,500

1,000

500

2,000

2,500

39.370 39.37019.685 19.685

0

59.055

39.370

19.685

78.740

98.425

STD

H-SP

HYPR

ℓ

LFiberhead

Fiberhead


Set

ting

dist

ance

L (m

m in

)FTA189

300 100200 0 100 200 300

400

200

600

800

1,000

11.811 3.9377.874 3.937 7.874 11.811

0

15.748

7.874

23.622

31.496

39.370

STD

HYPR

H-SP

ℓ

Fiberhead

Fiberhead

L


Set

ting

dist

ance

L (m

m in

)

FTA191

1,000 500 0 500 1,000

1,500

1,000

500

2,000

2,500

39.370 19.685 19.685 39.370

0

59.055

39.370

19.685

78.740

98.425

STD

H-SP

HYPR

ℓ

Fiberhead

Fiberhead

L


Set

ting

dist

ance

L (m

m in

)







FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F


FT-Z30W Thru-beam type

FT-Z40W Thru-beam typeFTA199

1,000 500 0 500 1,0000

2,000

1,000

3,000

4,000

39.370 19.685 19.685 39.370

78.740

39.370

118.110

157.480

H-SP

STD

HYPR

ℓ

Fiberhead

Fiberhead

L2.2mm0.087in


Set

ting

dist

ance

L (m

m in

)

FTA295

STD

HYPR

800 400600 200 0 600400200 8000

1,000

2,000

3,000

4,000

31.496 15.74823.622 7.874 23.62215.7487.874 31.496

39.370

78.740

118.110

157.480

H-SP

ℓ

Fiberhead

Fiberhead

L


Set

ting

dist

ance

L (m

m in

)

FTA199

1,000 500 0 500 1,0000

2,000

1,000

3,000

4,000

39.370 19.685 19.685 39.370

78.740

39.370

118.110

157.480

H-SP

STD

HYPR

ℓ

Fiberhead

Fiberhead

L5.5mm0.217in


Set

ting

dist

ance

L (m

m in

)

FTA295

STD

HYPR

800 400600 200 0 600400200 8000

1,000

2,000

3,000

4,000

31.496 15.74823.622 7.874 23.62215.7487.874 31.496

39.370

78.740

118.110

157.480

H-SP

1.2mm0.047in

Fiberhead

Fiberhead

Lℓ


Set

ting

dist

ance

L (m

m in

)

FT-Z40HBW Thru-beam type FT-Z802Y Thru-beam type

FTA204

1,500 5001,000 0 500 1,000 1,5000

2,000

1,000

3,000

4,000

59.055 19.68539.370 19.685 39.370 59.055

78.740

39.370

118.110

157.480

STD

HYPR

ℓ

Fiberhead

Fiberhead

LH-SP


Set

ting

dist

ance

L (m

m in

)

800 400 0 400 8000

2,000

1,000

3,000

4,000

31.496 15.748 15.748 31.496

78.740

39.370

118.110

157.480

STD

HYPR

H-SP


ℓ

Fiberhead

Fiberhead

L

Set

ting

dist

ance

L (m

m in

)

FT-Z30HW Thru-beam type

FTA202

400 200 0 200 4000

2,000

1,000

3,000

4,000

15.748 7.874 7.874 15.748

78.740

39.370

118.110

157.480

ℓ

Fiberhead

Fiberhead

L

STD

HYPR

H-SP


Set

ting

dist

ance

L (m

m in

)

FTA202

400 200 0 200 4000

2,000

1,000

3,000

4,000

15.748 7.874 7.874 15.748

78.740

39.370

118.110

157.480

STD

HYPR

H-SPℓ

Fiberhead

Fiberhead

L5.5mm0.217in


Set

ting

dist

ance

L (m

m in

)

FRA014

STD

HYPR

20 10 0 10 200

300

200

100

500

400

600

0.787 0.394 0.394 0.787

11.811

7.874

3.937

19.685

15.748

23.622

H-SP ℓ

Reflector

LFiberhead


Set

ting

dist

ance

L (m

m in

)

FRA014

STD

HYPR

20 10 0 10 200

300

200

100

500

400

600

0.787 0.394 0.394 0.787

11.811

7.874

3.937

19.685

15.748

23.622

H-SP ℓL

Reflector

Fiberhead


Set

ting

dist

ance

L (m

m in

)

FRA012

10 5 0 5 100

600

400

200

1,000

800

1,200

0.394 0.197 0.197 0.394

23.622

15.748

7.874

39.370

31.496

47.244

H-SP

HYPR

Fiberhead

ℓ

L

STD Reflector


RF-003

Set

ting

dist

ance

L (m

m in

)

FRA012

10 5 0 5 100

800

600

400

200

1,000

1,200

0.394 0.197 0.197 0.394

31.496

23.622

15.748

7.874

39.370

47.244

H-SP

HYPR

Fiberhead

Reflector

ℓ

L3mm

0.118in

STD


RF-003

Set

ting

dist

ance

L (m

m in

)

FR-KZ50E Retroreflective typeFR-KZ22E Retroreflective type

Retroreflective type Parallel deviation Sensing characteristics are listed in the alphabetic order of the Model No.

Vertical direction

Vertical direction

Vertical direction

Vertical direction

Vertical direction






FT-Z30H Thru-beam type

FTA201

400 200 0 200 400

2,000

1,000

3,000

4,000

15.748 7.874 7.874 15.748

0

78.740

39.370

118.110

157.480

STD

HYPR

H-SP

ℓ

Fiberhead

Fiberhead

L


Set

ting

dist

ance

L (m

m in

)

FTA201

400 200 0 200 400

2,000

1,000

3,000

4,000

15.748 7.874 7.874 15.748

0

78.740

39.370

118.110

157.480

STD

HYPR

H-SPℓ

Fiberhead

Fiberhead

L5.5mm0.217in


Set

ting

dist

ance

L (m

m in

)

FT-Z30EW Thru-beam type

FTA200

400 200 0 200 400

2,000

1,000

3,000

4,000

15.748 7.874 7.874 15.748

0

78.740

39.370

118.110

157.480

STD

HYPR

H-SP

ℓ

Fiberhead

Fiberhead

L


Set

ting

dist

ance

L (m

m in

)

FTA200

400 200 0 200 400

2,000

1,000

3,000

4,000

15.748 7.874 7.874 15.748

0

78.740

39.370

118.110

157.480

STD

HYPR

H-SP ℓ

Fiberhead

Fiberhead

L5.5mm0.217in


Set

ting

dist

ance

L (m

m in

)Vertical directionVertical direction Horizontal directionHorizontal direction



FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

Retroreflective type Parallel deviation Sensing characteristics are listed in the alphabetic order of the Model No.


FD-31W

FDA217

60 40 20 0 4020 600

200

100

300

400

2.362 1.575 0.787 1.5750.787 2.362

7.874

3.937

11.811

15.748

STD

HYPR

H-SPℓ

LFiberhead

Whitenon-glossy paper


Left Right

Set

ting

dist

ance

L (m

m in

)

FDA217

60 40 20 0 4020 600

200

100

300

400

2.362 1.575 0.787 1.5750.787 2.362

7.874

3.937

11.811

15.748

STD

HYPR

H-SPℓ

LFiberhead



DownUpS

ettin

g di

stan

ce L

(mm

in)

FD-32G

FDA233

STD

HYPR

200 100 0 100 2000

200

600

400

800

7.874 3.937 3.937 7.874

7.874

23.622

15.748

31.496

H-SP ℓL

Fiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)

FD-30

Reflective type Sensing field Sensing characteristics are listed in the alphabetic order of the Model No.

FDA262

STD

HYPR

150 100 50 0 10050 150

200

400

600

800

5.906 3.937 1.969 3.9371.969 5.906

0

7.874

15.748

23.622

31.496

H-SP

ℓ

LFiberhead


Left Right


Set

ting

dist

ance

L (m

m in

)

FDA262

150 100 50 0 50 100 150

200

400

600

800

5.906 3.937 1.969 1.969 3.937 5.906

0

7.874

15.748

23.622

31.496

STD

HYPR

H-SP

ℓ

LFiberhead


DownUp


Set

ting

dist

ance

L (m

m in

)

FDA256

150 100 50 0 10050 1500

200

300

100

400

500

600

5.906 3.937 1.969 3.9371.969 5.906

7.874

11.811

3.937

15.748

19.685

23.622

STD

HYPR

H-SP

ℓL

Fiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)

FDA256

150 100 50 0 10050 1500

200

300

100

500

400

600

5.906 3.937 1.969 3.9371.969 5.906

7.874

11.811

3.937

19.685

15.748

23.622

STD

HYPR

H-SP

ℓL

Fiberhead



DownUpS

ettin

g di

stan

ce L

(mm

in)

FD-31

With Reflective tape RF-13 (attached)

FRA010

150 100 50 0 50 100 150

1,000

500

1,500

2,000

5.906 3.937 1.969 1.969 3.937 5.906

39.370

19.685

59.055

78.740

H-SP

HYPR

STD

ℓ

LFiberhead

Reflective tape


0

RF-13

Set

ting

dist

ance

L (m

m in

)

FRA010

1,000

500

1,500

2,000

150 100 50 0 50 100 1500

39.370

19.685

59.055

78.740

5.906 3.937 1.969 1.969 3.937 5.906

H-SP

HYPR

STD

ℓ

LFiberhead

Reflective tape


RF-13

Set

ting

dist

ance

L (m

m in

)

With reflector RF-230 (optional)

FRA011

400 300 200 100 0 100 200 300 400

2,000

1,000

3,000

4,000

15.748 11.811 7.874 3.937 3.937 7.874 11.811 15.748

0

78.740

39.370

118.110

157.480

H-SP

HYPR

STD

ℓ

LFiberhead

ReflectorRF-230


Set

ting

dist

ance

L (m

m in

)

FRA011

2,000

1,000

3,000

4,000

ℓ

LFiberhead

Reflector

400 300 200 100 0 100 200 300 4000

78.740

39.370

118.110

157.480

15.748 11.811 7.874 3.937 3.937 7.874 11.811 15.748

HYPR

STD

H-SP


RF-230

Set

ting

dist

ance

L (m

m in

)

FR-Z50HW Retroreflective type

Reflective type Reflective type

Reflective typeReflective type

Vertical direction

Vertical direction

Vertical direction

Vertical direction

Vertical direction






FRA013

20 10 0 10 200

600

400

200

1,000

800

1,200

0.787 0.394 0.394 0.787

23.622

15.748

7.874

39.370

31.496

47.244

H-SP

HYPR

Fiberhead

Reflector

ℓ


L

STDRF-003

Set

ting

dist

ance

L (m

m in

)

FRA013

20 10 0 10 200

800

600

400

200

1,000

1,200

0.787 0.394 0.394 0.787

31.496

23.622

15.748

7.874

39.370

47.244

H-SP

HYPR

Fiberhead

Reflector

ℓ

L


STD RF-003

Set

ting

dist

ance

L (m

m in

)

FR-KZ50H Retroreflective type

Vertical directionHorizontal direction



FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F



FD-41 FD-41S

FDA258

150 100 50 0 10050 1500

200

300

100

400

500

600

5.906 3.937 1.969 3.9371.969 5.906

7.874

11.811

3.937

15.748

19.685

23.622

STD

HYPR

H-SP


ℓ

LFiberhead


Left Right

Set

ting

dist

ance

L (m

m in

)

FDA223

STD

HYPR

100 50 0 50 1000

200

100

500

400

300

600

3.937 1.969 1.969 3.937

7.874

3.937

19.685

15.748

11.811

23.622

H-SP

ℓL

Fiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)

FDA258

150 100 50 0 10050 1500

200

300

100

500

400

600

5.906 3.937 1.969 3.9371.969 5.906

7.874

11.811

3.937

19.685

15.748

23.622

STD

HYPR

H-SP

ℓ

LFiberhead



DownUpS

ettin

g di

stan

ce L

(mm

in)

FDA223

STD

HYPR

100 50 0 50 1000

200

100

500

400

300

600

3.937 1.969 1.969 3.937

7.874

3.937

19.685

15.748

11.811

23.622

H-SP

ℓL

Fiberhead

White non-glossy paper

DownUp


Set

ting

dist

ance

L (m

m in

)

FD-41SW

FDA224

STD

HYPR

40 20 0 20 400

200

100

300

400

1.575 0.787 0.787 1.575

7.874

3.937

11.811

15.748

H-SP

ℓL

Fiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)

FDA224

STD

HYPR

40 20 0 20 400

100

200

300

400

1.575 0.787 0.787 1.575

3.937

7.874

11.811

15.748

H-SP

ℓL

Fiberhead



DownUpS

ettin

g di

stan

ce L

(mm

in)

FD-41W

FDA218

STD

HYPR

150 100 50 0 10050 1500

400

200

600

800

1,000

5.906 3.937 1.969 3.9371.969 5.906

15.748

7.874

23.622

31.496

39.370

H-SP

ℓ

LFiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)

FDA218

150 100 50 0 10050 1500

400

200

600

800

1,000

5.906 3.937 1.969 3.9371.969 5.906

15.748

7.874

23.622

31.496

39.370

STD

HYPR

H-SP

ℓ

LFiberhead



DownUpS

ettin

g di

stan

ce L

(mm

in)

FD-60

FDA260

STD

HYPR

400 200 0 200 4000

500

1,000

1,500

2,000

15.748 7.874 7.874 15.748

19.685

39.370

59.055

78.740

H-SP

ℓ

LFiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)

FDA260

400 200 0 200 400

0

500

1,000

1,500

2,000

15.748 7.874 0.000 7.874 15.748

0.000

19.685

39.370

59.055

78.740

STD

HYPR

H-SP

ℓ

LFiberhead



DownUpS

ettin

g di

stan

ce L

(mm

in)

FD-42G

FDA203

STD

HYPR

200 100 0 100 2000

200

600

400

800

7.874 3.937 3.937 7.874

7.874

23.622

15.748

31.496

H-SP ℓL

Fiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)

FD-42GW

FDA235

STD

HYPR

100 50 0 50 1000

200

600

400

800

3.937 1.969 1.969 3.937

7.874

23.622

15.748

31.496

H-SP ℓL

Fiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)

Vertical direction

Vertical direction

Vertical direction

Vertical direction

Vertical direction








Reflective type Reflective type Reflective type

FD-40

FDA261

STD

HYPR

150 100 50 0 10050 1500

200

400

600

800

5.906 3.937 1.969 3.9371.969 5.906

7.874

15.748

23.622

31.496

H-SP

ℓ

LFiberhead


Left Right


Set

ting

dist

ance

L (m

m in

)

FDA261

150 100 50 0 50 100 1500

200

400

600

800

5.906 3.937 1.969 1.969 3.937 5.906

7.874

15.748

23.622

31.496

STD

HYPR

H-SP

ℓ

LFiberhead



DownUpS

ettin

g di

stan

ce L

(mm

in)

FD-32GX

FDA234

STD

HYPR

200 100 0 100 2000

200

600

400

800

7.874 3.937 3.937 7.874

7.874

23.622

15.748

31.496

H-SP ℓL

Fiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)





FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F



FD-61S FD-61W

FDA222

STD

HYPR

400 200 0 200 4000

500

1,000

1,500

15.748 7.874 7.874 15.748

19.685

39.370

59.055

H-SP

ℓL

Fiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)

FDA216

STD

HYPR

150 100 50 0 10050 1500

400

200

600

800

1,000

5.906 3.937 1.969 3.9371.969 5.906

15.748

7.874

23.622

31.496

39.370

H-SP

ℓ

LFiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)

FDA222

STD

HYPR

400 200 0 200 4000

500

1,000

1,500

15.748 7.874 7.874 15.748

19.685

39.370

59.055

H-SP

ℓL

Fiberhead

Whitenon-glossypaper


DownUpS

ettin

g di

stan

ce L

(mm

in)

FDA216

150 100 50 0 10050 1500

400

200

600

800

1,000

5.906 3.937 1.969 3.9371.969 5.906

15.748

7.874

23.622

31.496

39.370

STD

HYPR

H-SP

STD

HYPR

H-SP

ℓ

LFiberhead



DownUpS

ettin

g di

stan

ce L

(mm

in)

FD-62

FD-A16FDA220

600 400 200 0 400200 6000

500

1,000

1,500

2,000

23.622 15.748 7.874 15.7487.874 23.622

19.685

39.370

59.055

78.740

STD

HYPR

H-SP

ℓ

LFiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)

FDA225

STD

60 40 20 0 20 40 600

100

50

200

150

250

2.362 1.575 0.787 0.787 1.575 2.362

3.937

1.969

7.874

5.906

9.843

ℓ

LFiberhead


H-SP


200mm7.874in

Set

ting

dist

ance

L (m

m in

)

FDA220

600 400 200 0 400200 6000

500

1,000

1,500

2,000

STD

HYPR

H-SP

ℓ

LFiberhead


23.622 15.748 7.874 15.7487.874 23.622

19.685

39.370

59.055

78.740


DownUpS

ettin

g di

stan

ce L

(mm

in)

FDA225

STD

60 40 20 0 20 40 600

100

50

200

150

250

2.362 1.575 0.787 0.787 1.575 2.362

3.937

1.969

7.874

5.906

9.843

H-SPℓ

LFiberhead



200mm7.874in

Set

ting

dist

ance

L (m

m in

)

FD-64X

FDA248

300 200 100 0 200100 3000

200

400

600

800

11.811 7.874 3.937 7.8743.937 11.811

7.874

15.748

23.622

31.496

STD

HYPR

H-SP

ℓ

LFiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)

FDA248

300 200 100 0 200100 3000

400

200

600

800

11.811 7.874 3.937 7.8743.937 11.811

15.748

7.874

23.622

31.496

STD

HYPR

H-SP

ℓ

LFiberhead



DownUpS

ettin

g di

stan

ce L

(mm

in)

FD-AL11

FDA252

300 200 100 0 100 200 3000

400

200

600

800

11.811 7.874 3.937 3.937 7.874 11.811

15.748

7.874

23.622

31.496

ℓ

LFiberhead


H-SP

HYPR

STD


Set

ting

dist

ance

L (m

m in

)

FDA252

0

400

200

600

800

300 200 100 0 100 200 300

15.748

7.874

23.622

31.496

11.811 7.874 3.937 3.937 7.874 11.811

HYPR

STD

H-SP


3.6mm0.142in L

ℓ


Fiberhead

Set

ting

dist

ance

L (m

m in

)

Vertical direction

Vertical direction

Vertical direction

Vertical direction

Vertical direction

Vertical direction










FD-61

FDA259

600 400 200 0 400200 6000

500

1,000

1,500

23.622 15.748 7.874 15.7487.874 23.622

19.685

39.370

59.055

STD

HYPR

H-SP

ℓ

LFiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)

FDA259

600 400 200 0 400200 6000

500

1,000

1,500

23.622 15.748 7.874 15.7487.874 23.622

19.685

39.370

59.055

STD

HYPR

H-SP

ℓ

LFiberhead



DownUpS

ettin

g di

stan

ce L

(mm

in)

FD-61G

FDA200

STD

HYPR

600 400 200 0 200 400 6000

400

200

1,000

800

600

1,200

23.622 15.748 7.874 7.874 15.748 23.622

15.748

7.874

39.370

31.496

23.622

47.244

H-SPℓ

LFiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)





FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F



FD-H13-FM2

STDHYPR

H-SP

400 200 0 200 40015.748 7.874 7.874 15.748

500

1,000

500

1,000

0

19.685

39.370

0


Lℓ


Fiberhead

Set

ting

dist

ance

L (m

m in

)

FD-H18-L31

STD

HYPR

H-SP

4 2 0 2 40.157 0.079 0.079 0.157

40

20

60

80

0

1.575

0.787

2.362

3.150


Lℓ4mm

0.157in

Transparent glass100mm, (t=0.7mm)3.937in, (t=0.028in)

Set

ting

dist

ance

L (m

m in

)

STD

HYPR

H-SP

4 2 0 2 40.157 0.079 0.079 0.157

40

20

60

80

0

1.575

0.787

2.362

3.150


Emitter Lℓ

100mm,(t=0.7mm)3.937in,(t=0.028in)

Transparent glass

Set

ting

dist

ance

L (m

m in

)

FD-H20-21

STD

HYPR

H-SP

200 100 0 100 2007.874 3.937 3.937 7.874

500

1,000

19.685

39.370

0


Lℓ


Fiberhead

Set

ting

dist

ance

L (m

m in

)

FD-EG30S FD-EG31

STD

HYPR

60 2040 0 20 40 602.362 0.7871.575 0.787 1.575 2.362

100

50

150

200

0

3.937

1.969

5.906

7.874

H-SP ℓ

LFiberhead


200mm7.874in


Set

ting

dist

ance

L (m

m in

)

STD

HYPR

30 20 10 0 2010 301.181 0.787 0.394 0.7870.394 1.181

0

40

20

60

80

100

1.575

0.787

2.362

3.150

3.937

H-SP ℓ

LFiberhead


200mm7.874in


Set

ting

dist

ance

L (m

m in

)




FD-H25-L43

STD

HYPR

H-SP

4 2 0 2 40.157 0.079 0.079 0.157

20

10

30

40

0

0.787

0.394

1.181

1.575


Lℓ4.5mm 0.177in

Transparent glass 100mm, (t=0.7mm)3.937in, (t=0.028in)

Set

ting

dist

ance

L (m

m in

)

STD

HYPR

H-SP

4 2 0 2 40.157 0.079 0.079 0.157

20

10

30

40

0

0.787

0.394

1.181

1.575


LEmitter ℓ

100mm, (t=0.7mm)3.937in, (t=0.028in)

Transparent glass

Set

ting

dist

ance

L (m

m in

)


Reflective type

FD-H20-M1

STD

HYPR

H-SP

200 100 0 100 2007.874 3.937 3.937 7.874

500

1,000

19.685

39.370

0


Lℓ


Fiberhead

Set

ting

dist

ance

L (m

m in

)

Reflective type

FD-E13

FDA242

STD

HYPR

15 10 5 0 105 150

30

20

10

50

40

60

0.591 0.394 0.197 0.3940.197 0.591

1.181

0.787

0.394

1.969

1.575

2.362

H-SPℓ

LFiberhead



Left Right

200mm7.874in

Set

ting

dist

ance

L (m

m in

)

FDA242

STD

HYPR

15 10 5 0 105 150

30

20

10

50

40

60

0.591 0.394 0.197 0.3940.197 0.591

1.181

0.787

0.394

1.969

1.575

2.362

H-SPℓ

LFiberhead



DownUp

200mm7.874in

Set

ting

dist

ance

L (m

m in

)FD-E23 FD-EG30

FDA243

STD

HYPR

40 20 0 20 400

100

50

150

200

1.575 0.787 0.787 1.575

3.937

1.969

5.906

7.874

H-SP ℓ

LFiberhead



200mm7.874in

Set

ting

dist

ance

L (m

m in

)

FDA246

STD

HYPR

60 40 20 0 4020 600

100

50

150

200

2.362 1.575 0.787 1.5750.787 2.362

3.937

1.969

5.906

7.874

H-SP ℓ

LFiberhead



200mm7.874in

Set

ting

dist

ance

L (m

m in

)





FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

Reflective type Sensing field Sensing characteristics are listed in the alphabetic order of the Model No. (Models with same sensing characteristics are grouped together.)


FD-H30-L32V-S

STD

HYPR

H-SP

2 1 0 1 2

10

20

0.079 0.039 0.039 0.079

0.394

0.787

0


Lℓ

100mm, (t=0.7mm)3.937in, (t=0.028in)

Transparent glass

Set

ting

dist

ance

L (m

m in

)

STD

HYPR

H-SP

2 1 0 1 2

10

20

0.079 0.039 0.039 0.079

0.394

0.787

0


Emitter Lℓ

100mm, (t=0.7mm)3.937in, (t=0.028in)

Transparent glass

Set

ting

dist

ance

L (m

m in

)

FD-H35-20S

STD

HYPR

H-SP

400 200 0 200 400

500

1,000

15.748 7.874 7.874 15.748

19.685

39.370

0


Lℓ


Fiber head

Set

ting

dist

ance

L (m

m in

)

FD-H35-M2FD-H35-M2S6

STD

HYPR

H-SP

200 100 0 100 200

400

200

600

800

7.874 3.937 3.937 7.874

0

15.748

7.874

23.622

31.496


Lℓ


Fiber head

Set

ting

dist

ance

L (m

m in

)

FD-L10

FD-L12WFDA232

ℓL

3 2 1 0 21 3

2

4

6

8

0.118 0.079 0.039 0.0790.039 0.118

0

0.079

0.157

0.236

0.315

STD

HYPR

H-SP

Transparentglass


(t=0.7mm)(t=0.028in)

100mm3.937in

Set

ting

dist

ance

L (m

m in

)

FDA251

ℓL

1 0.5 0 0.5 1

5

10

15

0.039 0.020 0.020 0.039

0

0.197

0.394

0.591

STD

HYPR

H-SP


(t=0.7mm)(t=0.028in)

Transparent glass100mm3.937in

Set

ting

dist

ance

L (m

m in

)

FDA232

ℓ2mm

0.079in L

3 12 0 21 3

6

2

4

8

0.118 0.0390.079 0.0790.039 0.118

0

0.236

0.079

0.157

0.315

STD

HYPR

H-SP


100mm, (t=0.7mm)3.937in, (t=0.028in)

Transparent glass

Set

ting

dist

ance

L (m

m in

)

FDA251

ℓ1.5mm0.059in L

1 0.5 0 0.5 1

5

10

15

0.039 0.020 0.020 0.039

0

0.197

0.394

0.591

STD

HYPR

H-SP


(t=0.7mm)(t=0.028in)


Set

ting

dist

ance

L (m

m in

)

FD-L11

ℓL

FDA231

4 2 0 2 4

5

10

15

0.157 0.079 0.079 0.157

0

0.197

0.394

0.591

STD

HYPR

H-SP


(t=0.7mm)(t=0.028in)


Set

ting

dist

ance

L (m

m in

)

FDA231

4 2 0 2 4

10

5

15

0.157 0.079 0.079 0.157

0

0.394

0.197

0.591

STD

HYPR

H-SP


ℓ2mm

0.079in L

(t=0.7mm)(t=0.028in)


Set

ting

dist

ance

L (m

m in

)

FD-L20H

FDA226

HYPR

STD

15 10 5 0 5 10 15

20

10

40

30

50

0.591 0.394 0.197 0.197 0.394 0.591

0

0.787

0.394

1.575

1.181

1.969

H-SP ℓ

LFiberhead



200mm7.874in

Set

ting

dist

ance

L (m

m in

)

FDA226

ℓ

LFiberhead

15 10 5 0 5 10 15

20

10

40

30

50

0.591 0.394 0.197 0.197 0.394 0.591

0

0.787

0.394

1.575

1.181

1.969 HYPR

STD

H-SP



200mm7.874in

Set

ting

dist

ance

L (m

m in

)

Vertical direction

Vertical direction

Vertical direction

Vertical direction

Vertical direction






Reflective type

FD-H25-L45

STD

HYPR

H-SP

4 2 0 2 40.157 0.079 0.079 0.157

20

40

0.787

1.575

0


Lℓ4.5mm 0.177in

100mm, (t=0.7mm)3.937in, (t=0.028in)

Transparent glass

Set

ting

dist

ance

L (m

m in

)

STD

HYPR

H-SP

4 2 0 2 40.157 0.079 0.079 0.157

20

40

0.787

1.575

0


LEmitter ℓ

100mm, (t=0.7mm)3.937in, (t=0.028in)

Transparent glassS

ettin

g di

stan

ce L

(mm

in)

FD-H30-L32

STD

HYPR

H-SP

2 1 0 1 20.079 0.039 0.039 0.079

40

20

60

80

0

1.575

0.787

2.362

3.150


Lℓ

(t=0.7mm)(t=0.028in)


Set

ting

dist

ance

L (m

m in

)

STD

HYPR

H-SP

2 1 0 1 20.079 0.039 0.039 0.079

40

20

60

80

0

1.575

0.787

2.362

3.150


Emitter Lℓ

100mm, (t=0.7mm)3.937in, (t=0.028in)

Transparent glass

Set

ting

dist

ance

L (m

m in

)



Reflective type



Reflective type



FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F



FD-L30A

FD-L32HFDA202

ℓL

6 24 0 2 4 6

10

20

30

40

50

0.236 0.0790.157 0.079 0.157 0.236

0

0.394

0.787

1.181

1.575

1.969

STD

HYPR

H-SP


(t=0.7mm)(t=0.028in)

Transparentglass

100mm3.937in

Set

ting

dist

ance

L (m

m in

)

FDA230

HYPR

STD

10 5 0 5 10

60

40

20

100

80

120

0.394 0.197 0.197 0.394

0

2.362

1.575

0.787

3.937

3.150

4.724

ℓ L


R edge(R0.35 R0.014)

(t=0.7mm)(t=0.028in)


Set

ting

dist

ance

L (m

m in

)

FDA202

ℓL

6 24 0 2 4 6

20

10

40

30

50

0.236 0.0790.157 0.079 0.157 0.236

0

0.787

0.394

1.575

1.181

1.969

STD

HYPR

H-SP


2.5mm0.098in

(t=0.7mm)(t=0.028in)


Set

ting

dist

ance

L (m

m in

)

FDA230

ℓ L

10 5 0 5 10

60

40

20

80

100

120

0.394 0.197 0.197 0.394

0

2.362

1.575

0.787

3.150

3.937

4.724

STD

HYPR


R edge(R0.35R0.014)

(t=0.7mm)(t=0.028in)

Transparentglass

100mm3.937in

Set

ting

dist

ance

L (m

m in

)

FD-L31A

FDA229

ℓL

6 24 0 2 4 6

10

20

30

40

0.236 0.0790.157 0.079 0.157 0.236

0

0.394

0.787

1.181

1.575

STD

HYPR

H-SP


100mm, (t=0.7mm)3.937in, (t=0.028in)

Transparent glass

Set

ting

dist

ance

L (m

m in

)

FDA229

ℓL

6 24 0 2 4 6

20

10

30

40

0.236 0.0790.157 0.079 0.157 0.236

0


0.787

0.394

1.181

1.575

STD

HYPR

H-SP

3mm0.118in

(t=0.7mm)(t=0.028in)

Transparentglass

100mm3.937in

Set

ting

dist

ance

L (m

m in

)

FD-R60

FDA240

300 200 100 0 200100 300

600

400

200

800

1,000

1,200

11.811 7.874 3.937 7.8743.937 11.8110

23.622

15.748

7.874

31.496

39.370

47.244

STD

HYPR

H-SP

ℓ

LFiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)

FDA240

300 200 100 0 200100 300

600

400

200

800

1,000

1,200

11.811 7.874 3.937 7.8743.937 11.8110

23.622

15.748

7.874

31.496

39.370

47.244

STD

HYPR

H-SP

ℓ

LFiberhead


DownUp


Set

ting

dist

ance

L (m

m in

)

FD-L22A

FDA201

ℓL

4 2 0 2 4

5

10

15

20

25

30

35

0.157 0.079 0.079 0.1570

0.197

0.394

0.591

0.787

0.984

1.181

1.378

STD

HYPR

H-SP


100mm, (t=0.7mm)3.937in, (t=0.028in)

Transparent glass

Set

ting

dist

ance

L (m

m in

)

FDA201

ℓL

4 2 0 2 4

5

20

15

10

30

25

35

0.157 0.079 0.079 0.1570

0.197

0.787

0.591

0.394

1.181

0.984

1.378

STD

HYPR

H-SP


2.5mm0.098in

(t=0.7mm)(t=0.028in)

Transparentglass

100mm3.937in

Set

ting

dist

ance

L (m

m in

)

FD-L23

FDA205

6 4 2 0 2 4 6

5

10

15

20

25

30

35

0.236 0.157 0.079 0.079 0.157 0.2360

0.197

0.394

0.591

0.787

0.984

1.181

1.378

ℓL

STD

HYPR

H-SP


(t=0.7mm)(t=0.028in)

Transparentglass

100mm3.937in

Set

ting

dist

ance

L (m

m in

)

FDA205

ℓL

6 4 2 0 2 4 6

5

20

15

10

30

25

35

0.236 0.157 0.079 0.079 0.157 0.2360

0.197

0.787

0.591

0.394

1.181

0.984

1.378

STD

HYPR

H-SP


2.5mm0.098in

(t=0.7mm)(t=0.028in)

Transparentglass

100mm3.937in

Set

ting

dist

ance

L (m

m in

)

Vertical direction

Vertical direction

Vertical direction

Vertical direction

Vertical direction

Vertical direction










FD-L21

FDA227

STD

HYPR

6 4 2 0 42 6

5

10

15

20

0.236 0.157 0.079 0.1570.079 0.236

0

0.197

0.394

0.591

0.787

H-SP

ℓL

Emitter


200mm, (t=2.0mm)7.874in, (t=0.079in)

Transparent glass

Set

ting

dist

ance

L (m

m in

)

FDA227

STD

HYPR

3 2 1 0 21 3

5

10

15

20

0.118 0.079 0.039 0.0790.039 0.118

0

0.197

0.394

0.591

0.787

H-SP

ℓ3mm

0.118in LFiberhead


(t=2.0mm)(t=0.079in)

Transparentglass

200mm7.874in

Set

ting

dist

ance

L (m

m in

)FD-L21W

FDA228

4 2 0 2 4

5

10

15

20

0.157 0.079 0.079 0.157

0

0.197

0.394

0.591

0.787

ℓL

STD

HYPR

H-SP


200mm, (t=2.0mm)7.874in, (t=0.079in)

Transparent glass

Set

ting

dist

ance

L (m

m in

)

FDA228

2 1 0 1 2

5

10

15

20

0.079 0.039 0.039 0.079

0

0.197

0.394

0.591

0.787

H-SP

ℓL

STD

HYPR


3mm0.118in

(t=2.0mm)(t=0.079in)

Transparentglass

200mm7.874in

Set

ting

dist

ance

L (m

m in

)





FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F



FD-S21FD-R61Y

FDA245

STD

HYPR

60 40 20 0 4020 60

100

50

150

200

2.362 1.575 0.787 1.5750.787 2.362

0

3.937

1.969

5.906

7.874

H-SPℓ

L

Fiber head


Left Right


200mm7.874in

Set

ting

dist

ance

L (m

m in

)

FDA216

STD

HYPR

150 100 50 0 10050 1500

400

200

600

800

1,000

5.906 3.937 1.969 3.9371.969 5.906

15.748

7.874

23.622

31.496

39.370

H-SP

ℓ

LFiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)

FDA245

STD

HYPR

60 40 20 0 4020 60

100

50

150

200

2.362 1.575 0.787 1.5750.787 2.362

0

3.937

1.969

5.906

7.874

H-SPℓ

LFiberhead


DownUp


200mm7.874in

Set

ting

dist

ance

L (m

m in

)

FDA216

150 100 50 0 10050 1500

400

200

600

800

1,000

5.906 3.937 1.969 3.9371.969 5.906

15.748

7.874

23.622

31.496

39.370

STD

HYPR

H-SP

STD

HYPR

H-SP

ℓ

LFiberhead



DownUpS

ettin

g di

stan

ce L

(mm

in)

FD-S30

FDA263

STD

HYPR

150 100 50 0 10050 150

200

400

600

800

5.906 3.937 1.969 3.9371.969 5.906

0

7.874

15.748

23.622

31.496

H-SP

ℓ

LFiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)

FDA263

150 100 50 0 50 100 150

200

400

600

800

5.906 3.937 1.969 1.969 3.937 5.906

0

7.874

15.748

23.622

31.496

STD

HYPR

H-SP

ℓ

LFiberhead



DownUpS

ettin

g di

stan

ce L

(mm

in)

FD-S32

FDA221

STD

HYPR

400 200 0 200 400

500

1,000

1,500

15.748 7.874 7.874 15.748

0

19.685

39.370

59.055

H-SP

ℓ

L

Fiber head



Left Right

Set

ting

dist

ance

L (m

m in

)

FDA221

STD

HYPR

400 200 0 200 400

500

1,000

1,500

15.748 7.874 7.874 15.748

0

19.685

39.370

59.055

H-SP

ℓ

L

Fiber head



DownUpS

ettin

g di

stan

ce L

(mm

in)

FD-S31

FDA257

150 100 50 0 10050 150

200

300

100

400

500

600

5.906 3.937 1.969 3.9371.969 5.9060

7.874

11.811

3.937

15.748

19.685

23.622

STD

HYPR

H-SP

ℓ

LFiberhead



Left Right

Set

ting

dist

ance

L (m

m in

)

FDA257

150 100 50 0 10050 150

200

300

100

500

400

600

5.906 3.937 1.969 3.9371.969 5.906

0

7.874

11.811

3.937

19.685

15.748

23.622

STD

HYPR

H-SP

ℓ

LFiberhead



DownUpS

ettin

g di

stan

ce L

(mm

in)

FD-S32W

FD-S60YFDA219

STD

HYPR

150 100 50 0 10050 150

400

200

600

800

1,000

5.906 3.937 1.969 3.9371.969 5.906

0

15.748

7.874

23.622

31.496

39.370

H-SP

ℓ

L

Fiber head


Left Right


Set

ting

dist

ance

L (m

m in

)

FDA221

STD

HYPR

50 25 0 25 50

200

400

600

1.969 0.984 0.984 1.969

7.874

15.748

23.622

0

H-SP

ℓ

L

Fiber head



Left Right

Set

ting

dist

ance

L (m

m in

)

FDA219

150 100 50 0 10050 150

400

200

600

800

1,000

5.906 3.937 1.969 3.9371.969 5.906

0

15.748

7.874

23.622

31.496

39.370

STD

HYPR

H-SP

ℓ

L

Fiber head



DownUpS

ettin

g di

stan

ce L

(mm

in)

FDA221

STD

HYPR

50 25 0 25 50

200

400

600

1.969 0.984 0.984 1.969

7.874

15.748

23.622

0

H-SP

ℓ

L

Fiber head



DownUpS

ettin

g di

stan

ce L

(mm

in)

FD-S33GW

FDA236

STD

HYPR

100 50 0 50 100

200

600

400

800

3.937 1.969 1.969 3.937

0

7.874

23.622

15.748

31.496

H-SP

ℓ

L

Fiber head



Left Right

Set

ting

dist

ance

L (m

m in

)

Vertical direction

Vertical direction Vertical direction

Vertical direction

Vertical direction

Vertical directionVertical direction


Horizontal direction Horizontal direction



Horizontal directionHorizontal direction

Reflective type

Reflective type

Reflective type


Reflective type

Reflective type

Reflective type



FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F



FD-Z40W

FDA347

STD

HYPR

80 60 40 20 0 40 6020 80

200

400

600

800

3.150 2.362 1.575 0.787 1.575 2.3620.787 3.150

0

7.874

15.748

23.622

31.496

H-SP

ℓ4.0mm0.158in

Fiber head


L


Set

ting

dist

ance

L (m

m in

)

FDA347

STD

HYPR

80 60 40 20 0 40 6020 80

200

400

600

800

3.150 2.362 1.575 0.787 1.575 2.3620.787 3.150

0

7.874

15.748

23.622

31.496

H-SP1.2mm0.047in

Fiber head


Lℓ


Set

ting

dist

ance

L (m

m in

)

FD-Z50HW

FDA241

STD

60 40 20 0 20 40 60

1,500

1,000

500

2,500

2,000

3,000

2.362 1.575 0.787 0.787 1.575 2.3620

59.055

39.370

19.685

98.425

78.740

118.110ℓ

L

Fiberhead


H-SP

HYPR


Set

ting

dist

ance

L (m

m in

)

FDA241

1,500

1,000

500

2,500

2,000

3,000

60 40 20 0 20 40 600

59.055

39.370

19.685

98.425

78.740

118.110

2.362 1.575 0.787 0.787 1.575 2.362

ℓL

Fiber head

White non-glossypaperHYPR

STD

H-SP


Set

ting

dist

ance

L (m

m in

)



FD-Z20W

FDA436

STD

HYPR

30 20 10 0 2010 30

100

50

150

250

200

300

1.181 0.787 0.394 0.7870.394 1.1810

3.937

1.969

5.906

9.843

7.874

11.811

H-SP

ℓ3.5mm0.138inFiberhead


L


Set

ting

dist

ance

L (m

m in

)

FDA346

STD

HYPR

30 20 10 0 2010 30

100

50

150

250

200

300

1.181 0.787 0.394 0.7870.394 1.181

0

3.937

1.969

5.906

9.843

7.874

11.811

H-SP

1.2mm0.047in

Fiberhead


Lℓ


Set

ting

dist

ance

L (m

m in

)

FD-Z40HBW

FDA250

STD

150 100 50 0 50 100 150

200

600

400

800

5.906 3.937 1.969 1.969 3.937 5.906

0

7.874

23.622

15.748

31.496

L


ℓ

Fiberhead

H-SP

HYPR


Set

ting

dist

ance

L (m

m in

)

FDA250

STD

HYPR

150 50100 0 10050 150

400

200

600

800

5.906 1.9693.937 3.9371.969 5.906

0

15.748

7.874

23.622

31.496

H-SP ℓ4mm0.158in L

Fiberhead



Set

ting

dist

ance

L (m

m in

)



FD-V50

FDA239

STD

HYPR

100 50 0 50 100

200

100

300

400

3.937 1.969 1.969 3.937

0

7.874

3.937

11.811

15.748

H-SP

ℓL

Fiber head



Set

ting

dist

ance

L (m

m in

)

FDA239

STD

HYPR

100 50 0 50 100

200

100

300

400

3.937 1.969 1.969 3.937

0

7.874

3.937

11.811

15.748

H-SPℓL

Fiber head



Set

ting

dist

ance

L (m

m in

)

FD-Z20HBW

FDA249

STD

HYPR

60 40 20 0 20 40 60

100

300

200

400

2.362 1.575 0.787 0.787 1.575 2.362

0

3.937

11.811

7.874

15.748

H-SP

ℓL

Fiberhead



Set

ting

dist

ance

L (m

m in

)

FDA249

STD

HYPR

60 2040 0 4020 60

200

100

300

400

2.362 0.7871.575 1.5750.787 2.362

0

7.874

3.937

11.811

15.748

H-SP

ℓ3.5mm0.138in L

Fiberhead



Set

ting

dist

ance

L (m

m in

)



FD-V30

FDA237

STD

HYPR

80 40 2060 0 4020 60 80

100

50

200

150

250

3.150 1.575 0.7872.362 1.5750.787 2.362 3.150

0

3.937

1.969

7.874

5.906

9.843

H-SPℓ

LFiberhead



200mm7.874in

Set

ting

dist

ance

L (m

m in

)

FDA237

STD

HYPR

80 40 2060 0 4020 60 80

100

50

200

150

250

3.150 1.575 0.7872.362 1.5750.787 2.362 3.150

0

3.937

1.969

7.874

5.906

9.843

H-SPℓL

Fiber head



200mm7.874in

Set

ting

dist

ance

L (m

m in

)FD-V30W

FDA238

STD

HYPR

20 10 0 10 20

40

20

80

60

100

0.787 0.394 0.394 0.787

0

1.575

0.787

3.150

2.362

3.937

H-SPℓ

LFiberhead


White non-glossy paper200mm7.874in

Set

ting

dist

ance

L (m

m in

)

FDA238

STD

HYPR

20 10 0 10 20

40

20

80

60

100

0.787 0.394 0.394 0.787

0

1.575

0.787

3.150

2.362

3.937

H-SP ℓL

Fiber head



200mm7.874in

Set

ting

dist

ance

L (m

m in

)





FIBERSENSORS

LASERSENSORS


MICROPHOTO-

ELECTRICSENSORS

AREASENSORS

LIGHTCURTAINS /

SAFETYCOMPONENTS

PRESSURE / FLOW

SENSORS

INDUCTIVEPROXIMITY

SENSORS

PARTICULARUSE

SENSORS

SENSOROPTIONS

SIMPLEWIRE-SAVING

UNITS

WIRE-SAVING SYSTEMS

MEASURE-MENT

SENSORSSTATIC


DEVICES

LASERMARKERS

PLC

HUMAN MACHINE

INTERFACESENERGY


FA COMPONENTS

MACHINE VISION

SYSTEMS

UV CURING

SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/

FX-301-F

Others• Our products have been developed / produced for

industrial use only.• The specification may not be satisfied in a strong

magnetic field.• The ultra long distance (U-LG, HYPR) mode is more

likely to be affected by extraneous noise since the sensitivity of that is higher than the other modes. Make sure to check the environment before use.

• Do not use during the initial transient time (H-SP, FAST, STD: 0.5 sec., LONG, U-LG, HYPR: 1 sec.) after the power supply is switched ON.

• These sensors are only for indoor use.• Avoid dust, dirt, and steam.• Make sure that the product does not come in contact with

oil, grease, organic solvents such as thinner, etc., strong acid or alkaline.

• This product cannot be used in an environment containing inflammable or explosive gases.

• Never disassemble or modify this product.• This product adopts EEPROM. Settings cannot be done

a million times or more because of the EEPROM's lifetime.

• Never use this product as a sensing device for personnel protection.

• In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country.

Wiring

• Make sure that the power supply is OFF while adding or removing the amplifiers.

• Note that if a voltage exceeding the reted range is applied, or if an AC power supply is directly connected, the product may get burnt or damaged.

• Note that short-circuit of the load or wrong wiring may burn or damage the product.

• Do not run the wires together with high-voltage lines or power lines, or put them in the same raceway.This can cause malfunction due to induction.

• Verify that the supply voltage variation is within the rating.• If power is supplied from a commercial switching

regulator, ensure that the frame ground (F.G.) terminal of the power supply is connected to an actual ground.

• In case noise generating equipment (switching regulator, inverter motor, etc.) is used in the vicinity of this product, connect the frame ground (F.G.) terminal of the equipment to an actual ground.

• Make sure to use the quick-connection cable (optional) for the connection of the controller.Extension up to total 100 m 328.084 ft is possible with 0.3 mm2 or more, cable.However, in order to reduce noise, make the wiring as short as possible.

• Make sure that stress by forcible bending or pulling is not applied to the sensor cable joint and fiber cable.

PRECAUTIONS FOR PROPER USE Refer to the “PRO mode operation manual” on our website for details.



FIBERSENSORS

LASERSENSORS


AREASENSORS




SENSOROPTIONS


WIRE-SAVING SYSTEMS


LASERMARKERS

PLC


FA COMPONENTS


UV CURING SYSTEMS

Selection Guide

Fibers

Fiber Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311FX-301-F7/FX-301-F

DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from our website.

FX-505-C2 FX-505P-C2 AmplifierFX-501(P) FX-502(P) Amplifier

Notes: 1) FX-502(P) only2) FX-501(P): Operation indicator3) FX-501(P): 3-pin, FX-502(P): 4-pin

24 0.945 36.5 1.437 3.950.156

10.50.413

27.8 1.094

7 0.276

30.118

281.102

321.260 20.8

0.8195.7 0.224

Communication window

Suitable for 35 mm 1.378 in width DIN rail

100.394

75 2.953

1.1 0.043

Output 1 operation indicator (Orange) (Note 2)

Digital display (Green / Red)

62.5 2.461

MODE key

Output selection indicator (Yellow) (Note 1)

Output 2 operation indicator (Orange) (Note 1)

8.20.323 2 0.079

22.7 0.894

(Note 3)

Beam-receiving part

Beam-emittingpart

7 0.276

9.950.392

Setting switch

3.950.156

9.20.362

2.8 0.110

62.5 2.461

Output 1 operation indicator (Orange)Output 2 operation indicator (Orange) Digital display (Green / Red)

MODE keyOutput selection indicator (Yellow)

Communication window


2 0.079

22.7 0.89410

0.394

8.20.323

Beam-receiving part

Beam-emittingpart

5.7 0.2247 0.276

281.102

321.260 20.8

0.819

30.118

75 2.953

27.8 1.094

70.276

24 0.945 36.5 1.437

10.50.413

9.950.392

Setting switch

ø4 ø0.157cable 2 m 6.562 ft

Main cable (Optional)CN-73-C CN-74-C Sub cable (Optional)CN-71-C CN-72-C

L

ø3.3 ø0.130 cable

50 1.969

(Note 1)

2.65 0.104

2.54 0.100

2.54 0.100

10.5 0.413

0.2 0.008

13.6 0.535

10 0.394

14 0.551

7.2 0.283

3 0.118

2.9 0.114

6 0.236

10 0.394

7 0.276

12 0.472 ( )

( ) ( ) ( )

(Note 2)

• Length L

Model No. Length L

CN-73/74-C1 1,000 39.370

CN-73/74-C2 2,000 78.740

CN-73/74-C5 5,000 196.850

L

2.65 0.104

2.54 0.100

2.54 0.100

10.5 0.413

0.2 0.008

13.6 0.535

10 0.394

14 0.551

7.2 0.283

3 0.118

2.9 0.114

6 0.236

10 0.394

ø3.3 ø0.130 cable

7 0.276

50 1.969

12 0.472 ( )

( ) ( )

(Note 2)

(Note 1)

3 0.118

( )

Model No. Length L

CN-71/72-C1 1,000 39.370

CN-71/72-C2 2,000 78.740

CN-71/72-C5 5,000 196.850

• Length L

Notes: 1) CN-74-C only 2) CN-73-C: 3-core

Amplifier mounting bracket (Optional)MS-DIN-2

2-ø3.2 ø0.126 holes

20.079

t 1t 0.039

0.40.016

7.50.295 4.2 0.165

20.079ø1.8

ø0.071

351.378

271.063

3.20.126

5.20.205

8.50.335

5.20.205

3.20.126

50.197

21.6 0.85016 0.630

100.394

Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated)

Notes: 1) CN-72-C only 2) CN-71-C: 1-core

End plate (Optional)MS-DIN-E

2.75 0.108

4 0.157

3 0.118

M3 (length 18 mm 0.709 in) pan head screws

M3 square nut 5.6 0.220

24.7 0.972

1.6 0.063

32 1.260

60 2.362 15

0.591

3 0.118


Material: Polycarbonate


Documents

· 73 SENSORS When the Guide Fibers Amplifiers F-500 F-100 F-300 F-410 F-311 F-301-F7/ F-301-F FIBER LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS