1
50.100 N | Total Eraze White Total Deco Technical &Performance Information Issue# : 072017 * equivalent to vertical exposure in Mid-European climate Features Total Eraze White is a high gloss polymeric PVC f lm used for whiteboard application. The PVC f lm is top coated with a low energy lacquer to ensure clean removal of the ink used in whiteboard markers. The grey tinted adhesive system ensures greater opacity of the prod- uct. The f lm should be applied at room temperature to achieve the best installation conditions. Apply on smooth surfaces. Please always check suitability of white board marker pen prior to installation. 50.100 N | Total Eraze White is available at 1350mm x 50m. All materials used to produce this Film Thickness 150 microns Adhesive Thickness 20 microns Total Thickness 170 microns Adhesive Type Grey tinted permanent based acrylic Release Liner 130 gsm one side siliconised liner Artif cial weathering* 3 years Film Tensile Strength MD > 15 N/mm² Film Elongation MD > 80% Opacity 96% minimum Adhesion to steel (20 mins / 180°) 7 N/25mm Adhesion to steel (24 hours / 180°) 18 N/25mm Dry wipe marker compatibility Marker Brand Model/MFC <24 hours 48 hours 1 week 3weeks BIC 1.4mm 5 5 5 5 Bruynzeel Color express 8 5 5 5 5 Edding 360 - 1.5mm 5 5 5 5 BIC 0.8mm 5 5 5 5 Harrows Darts #3600 5 5 5 5 Staedtler Lumocolor 2mm 5 5 5 5 Stabilo Big Point 88 5 5 5 5 Rank Scale: (1) chemical cleaner needed to remove; (2) dif cult to remove; (3) leaves ghosting; (4) good wipe of ; (5) excellent wipe of with dry paper towel Seldenrod Brands cptorders@seldenrod.co.za jhborders@seldenrod.co.za kznorders@seldenrod.co.za Warrantees of material for one (1) year from date of shipment. The shelf life of material is dependent on storage conditions. It is recommend that the end userstores the material in the original boxes (out of direct sunlight) from factory. It is also recommend to store material at 21°C with 50% relative humidity. Warrantees products to be free from defects in workmanship or defects in material. User assumes all risk and liability in connection herewith. All datavalues quoted above are typical and should not be used to deem the product defective, if measured values are defective

50.100 N | Total Eraze White Total Deco - Seldenrod...Harrows Darts #3600 5 5 5 5 Staedtler Lumocolor 2mm 5 5 5 5 Stabilo Big Point 88 5 5 5 5 Rank Scale: (1) chemical cleaner needed

  • Upload
    others

  • View
    5

  • Download
    0

Embed Size (px)

Citation preview

Page 1: 50.100 N | Total Eraze White Total Deco - Seldenrod...Harrows Darts #3600 5 5 5 5 Staedtler Lumocolor 2mm 5 5 5 5 Stabilo Big Point 88 5 5 5 5 Rank Scale: (1) chemical cleaner needed

TFW

50.100 N | Total Eraze WhiteTotal Deco

Technical & Performance Information

WarrantyiSee2 warrantees our material for one (1) year from date of shipment. The shelf life ofour material is dependent on storage conditions. We recommend that the end userstores the material in the original boxes (out of direct sunlight) from our factory. Wealso recommend to store our material at 21°C with 50% relative humidity. iSee2 onlywarrantees our products to be free from defects in workmanship or defects in iSee2material. We will replace or credit any material deemed defective. No acceptance orresponsibility for loss, damage or expense implied or otherwise shall be assumed by theseller or manufacturer. User assumes all risk and liability in connection herewith. All datavalues quoted above are typical and should not be used to deem the product defective,

Issue#: 072017

* equivalent to vertical exposure in Mid-European climate

Features

Total Eraze White is a high gloss polymeric PVC f lm used for whiteboard application. ThePVC f lm is top coated with a low energy lacquer to ensure clean removal of the ink used inwhiteboard markers. The grey tinted adhesive system ensures greater opacity of the prod-uct.

The f lm should be applied at room temperature to achieve the best installation conditions.Apply on smooth surfaces. Please always check suitability of white board marker pen prior toinstallation.

50.100 N | Total Eraze White is available at 1350mm x 50m. All materials used to produce this

Film Thickness 150 micronsAdhesive Thickness 20 micronsTotal Thickness 170 micronsAdhesive Type Grey tinted permanent based acrylicRelease Liner 130 gsm one side siliconised linerArtif cial weathering* 3 yearsFilm Tensile Strength MD > 15 N/mm²Film Elongation MD > 80%Opacity 96% minimumAdhesion to steel (20 mins / 180°) 7 N/25mmAdhesion to steel (24 hours / 180°) 18 N/25mm

Groendreef 35B-9880 Aalter | BelgiumT +32 9 216 6700F+32 9 216 6709Wwww. isee2. eu

Dry wipe marker compatibility

Marker Brand Model/MFC <24 hours 48 hours 1 week 3weeksBIC 1.4mm 5 5 5 5Bruynzeel Color express 8 5 5 5 5Edding 360 - 1.5mm 5 5 5 5BIC 0.8mm 5 5 5 5Harrows Darts #3600 5 5 5 5Staedtler Lumocolor 2mm 5 5 5 5Stabilo Big Point 88 5 5 5 5

Rank Scale: (1) chemical cleaner needed to remove; (2) dif cult to remove; (3) leaves ghosting;(4) good wipe of ; (5) excellent wipe of with dry paper towel

Seldenrod Brands

[email protected]@[email protected]

Warrantees of material for one (1) year from date of shipment. The shelf life of material is dependent on storage conditions. It is recommend that the end userstores the material in the original boxes (out of direct sunlight) from factory. It is also recommend to store material at 21°C with 50% relative humidity. Warrantees products to be free from defects in workmanship or defects in material. User assumes all risk and liability in connection herewith. All datavalues quoted above are typical and should not be used to deem the product defective, if measured values are defective