Embed Size (px)
Citation preview
4th RAMM & 2nd ASMP 2009 - TENTATIVE PROGRAMME
DAY 1. 1st June 2009
Time
0900 ‐ 0940 Keynote 1. Prof N. Takeda (venue: Grand Ballroom)
0940 ‐ 1020 Keynote 2. Tuan Hj Muhamad Nor Muhamad (venue: Grand Ballroom)
1020 ‐ 1040 TEA BREAK 1040 ‐ 1110 Invited Paper IEV1:
Prof F. Saito (Rafflesia) Invited Paper IM1: Prof Y. Tsukahara (Crystal Ballroom)
PARALLEL SESSIONS
Session 1A: Minerals and Environmental
(Rafflesia)
Session 2A: Nanomaterials (Orchid 1)
Session 3A: Ceramics (Orchid 2)
Session 4A – Polymer (Hibiscus)
Session 5A – Metallurgy
(Crystal Ballroom)
Session 6A – Electronics (Dahlia)
1110 ‐ 1130 EV 1 NM 1 CM 1 PM 1 MT 1 EM 1 1130 ‐ 1150 EV 2 NM 2 CM 2 PM 2 MT 2 EM 2 1150 ‐ 1210 EV 3 NM 3 CM 3 PM 3 MT 3 EM 3 1210 ‐ 1230 EV 4 NM 4 CM 4 PM 4 MT 4 EM 4 1230 ‐ 1250 EV 5 NM 5 CM 5 PM 5 MT 5 EM 5 1250 ‐ 1420 LUNCH 1420 ‐ 1450 Invited Paper IEV2: Mr
A. Auer (Rafflesia) Invited Paper IM2: Prof J. Zhao (Crystal Ballroom)
Session 1B: Minerals and Environmental (Rafflesia Room)
Session 2B: Nanomaterials (Orchid 1)
Session 3B: Ceramics (Orchid 2)
Session 4B: Polymer (Hibiscus)
Session 5B: Metallurgy (Crystal Ballroom)
Session 6B: Electronics (Dahlia)
1450 ‐ 1510 EV 6 NM 6 CM 6 PM 6 MT 6 EM 6 1510 ‐ 1530 EV 7 NM 7 CM 7 PM 7 MT 7 EM 7 1530 ‐ 1550 EV 8 NM 8 CM 8 PM 8 MT 8 EM 8 1550 ‐ 1610 EV 9 NM 9 CM 9 PM 9 MT 9 EM 9 1610 ‐ 1630 COFFEE BREAK
Session 1C: Minerals and Environmental (Rafflesia Room)
Session 2C: Nanomaterials (Orchid 1)
Session 3C: Ceramics (Orchid 2)
Session 4C: Polymer (Hibiscus)
Session 5C: Metallurgy (Crystal Ballroom)
Session 6C: Electronics (Dahlia)
1630 ‐1650 EV 10 NM 10 CM 10 PM 10 MT 10 EM 10 1650 ‐1710 EV 11 NM 11 CM 11 PM 11 MT 11 EM 11 1710 ‐1730 EV 12 NM 12 CM 12 PM 12 MT 12 EM 12 1730 ‐1750 EV 13 NM 13 CM 13 PM 13 MT 13 EM 13
End of Day 1
Day 2. 2nd June 2009
TIME 0900 ‐ 0930 Invited Paper IEV3:
Prof N. A. Abdel‐Khalek (Rafflesia
Room)
Invited Paper IM3: Prof Nowak (Crystal Ballroom)
PARALLEL SESSIONS
Session 1D: Minerals and Environmental (Rafflesia Room)
Session 2D: Metallurgy (Orchid 1)
Session 3D: Ceramics (Orchid 2)
Session 4D: Polymer (Hibiscus)
Session 5D: Metallurgy (Crystal Ballroom)
Session 6D: Electronics (Dahlia)
0930 ‐ 0950 EV 14 MT 14 CM 14 PM 14 MT 17 EM 14 0950 ‐ 1010 EV 15 MT 15 CM 15 PM 15 MT 18 EM 15 1010 ‐ 1030 EV 16 MT 16 CM 16 PM 16 MT 19 EM 16 1030 ‐ 1100 TEA BREAK 1100 ‐ 1130 Invited Paper IEV4: En
Mohd Nazir Omar (Rafflesia Room)
Invited Paper IM4: Prof I. Ihara (Crystal Ballroom)
Session 1E: Minerals and Environmental (Rafflesia Room)
Session 2E: Metallurgy (Orchid 1)
Session 3E: Metallurgy (Orchid 2)
Session 4E: Polymer (Hibiscus)
Session 5E: Metallurgy (Crystal Ballroom)
Session 6E: Electronics (Dahlia)
1130 ‐ 1150 EV17 MT 20 MT 24 PM 17 MT 28 EM 17 1150 ‐ 1210 EV18 MT 21 MT 25 PM 18 MT 29 EM 18 1210 ‐ 1230 EV19 MT 22 MT 26 PM 19 MT 30 EM 19 1230 ‐ 1250 EV20 MT 23 MT 27 PM 20 MT 31 EM 20 1240 ‐ 1400 LUNCH 1400 ‐ 1430 Invited Paper IEV5:
Prof. F. M. Doyle (Rafflesia Room)
Invited Paper M 5 (IM5): Prof R. Ganamoorthy ( Crystal Ballroom )
Session 1F: Minerals and Environmental (Rafflesia Room)
Session 2F: Metallurgy (Orchid 1)
Session 3F: Metallurgy (Orchid 2)
Session 4F: Polymer (Hibiscus)
Session 5F: Metallurgy (Crystal Ballroom)
Session 6F: Metallurgy (Dahlia)
1430 ‐ 1450 EV 21 MT 32 MT 36 PM 21 MT 40 MT 44 1450 ‐ 1510 EV 22 MT 33 MT 37 PM 22 MT 41 MT 45 1510 ‐ 1530 EV 23 MT 34 MT 38 PM 23 MT 42 MT 46 1530 ‐ 1550 EV 24 MT 35 MT 39 PM 24 MT 43 MT 47 1550 ‐ 1610 COFFEE BREAK 1610 ‐ 1730 POSTER PRESENTATION AND COMPETITION
2000 ‐ 2300 CONFERENCE DINNER, OPENING & CULTURAL PERFORMANCE
End of day 2
Day 3. 3rd June 2009
0900 ‐ 0930 Invited Paper M6 (IM6): Prof. Ahmad Fauzi Ismail (Crystal Ballroom) Time Session 1G: Minerals
and Environmental (Rafflesia Room)
Session 2G: Metallurgy(Orchid 1)
Session 3G: Metallurgy (Orchid 2)
Session 4G: Polymer (Hibiscus)
Session 5G: Metallurgy
(Crystal Ballroom)
Session 6G: Electronics (Dahlia)
0930 ‐ 0950 EV 25 MT 48 MT 51 PM 25 MT 54 EM 21 0950 ‐ 1010 EV 26 MT 49 MT 52 PM 26 MT 55 EM 22 1010 ‐ 1030 EV 27 MT 50 MT 53 PM 27 MT 56 EM 23 1030 ‐ 1100 Coffee Break 1100‐1130 Invited Paper M7 (IM7): Assoc. Prof. C. Kanchanomai (Crystal Ballroom)
Session 1H: Metallurgy
(Rafflesia Room)
Session 2H: Metallurgy (Orchid 1)
Session 3H: Metallurgy (Orchid 2)
Session 4H: Polymer (Hibiscus)
FORUM (Crystal Ballroom)
1130 ‐ 1150 MT 63 MT 60 MT 57 PM 28 Forum on ‘Excellence in Materials, Minerals and Environment Research Towards the Sustainable
Tomorrow’ 1150 ‐ 1210 MT 64 MT 61 MT 58 PM 29 1210 ‐ 1230 MT 65 MT 62 MT 59 PM 30 1230 ‐ 1400 CLOSING CEREMONY & FAREWELL LUNCH
END of the day 3
13
PROGRAMME DETAILS
Day 1 (morning). KEYNOTE SPEAKERS
Venue: Grand Ballroom Chairperson : Prof. Khairun Azizi Mohd Azizli
0900 ‐ 0940 Keynote 1 Damage Growth Prediction in Fiber Reinforced Composites and Structural Health Monitoring Prof N. Takeda
0940 ‐ 1020 Keynote 2 2009: A Challenging Year for the Global Mining Industry Tuan Hj Muhamad Nor Muhamad
Day 1 (morning). INVITED SPEAKERS
Minerals and Environmental
Venue: Rafflesia Chairperson : Dr. Samayamutthirian Palaniandy
1040 ‐ 1110 IEV 1 Mechanochemical Engineering for Environment and Material ProcessingQiwu Zhang, Junya Kano and Prof. Fumio Saito
Materials
Venue: Crystal Ballroom Chairperson : Prof. Hanafi Ismail
1040 ‐ 1110 IM 1 Macroinitiators and Macromonomers in Macromolecular Design Prof. Yasuhisa Tsukahara, Ryota Uemura, Toshiki Takenaka, Minoru Yamamoto, and Kaoru Adachi
Day 1 (afternoon). INVITED SPEAKERS
Minerals and Environmental
Venue: Rafflesia Chairperson : Prof. Khairun Azizi Mohd Azizli
1420 ‐ 1450 IEV 2 Dry Processing of Ultra Fine Minerals with Lower Total Power Consumption and Reduced Environmental Impact Mr Alexander Auer and Dietmar Alber
Materials
Venue: Crystal Ballroom Chairperson : Dr. Alberto Armoso
1420 ‐ 1450 IM 2 Energy Efficient Power Electronics Based on Silicon Carbide SemiconductorDr. Cheong Kuan Yew and Jian H. Zhao
14
Day 2 (morning). INVITED SPEAKERS
Minerals and Environmental Venue: Rafflesia
Chairperson : Prof. F. Saito
1040 ‐ 1110 IEV 3 Maximizing the Value of Some Egyptian Industrial Minerals Prof N. A. Abdel‐Khalek
Materials
Venue: Crystal Ballroom Chairperson : Dr. N. Ohtake
1420 ‐ 1450 IM 3 Nanoscale Plasticity Revised – The Mystery of “Current Spike” Prof. R. Nowak
Day 2 (late morning). INVITED SPEAKERS
Minerals and Environmental
Venue: Rafflesia Chairperson : Mr. Alexander Auer
1100 ‐ 1130 IEV 4 Working Towards an Environmentally Responsible Mining Industry in Malaysia Mr. Mohd Nazir Omar
Materials
Venue: Crystal Ballroom Chairperson : Dr. Zainuddin Sajuri
1100 ‐ 1130 IM 4 A Novel Non‐contact Thermometry with Laser Ultrasound for Monitoring Temperature Distributions of Materials Prof I. Ihara
Day 2 (afternoon). INVITED SPEAKERS
Minerals and Environmental
Venue: Rafflesia Chairperson : Prof. Khairun Azizi Mohd Azizli
1400 ‐ 1430 IEV 5 The Role of Hydrometallurgy in a Sustainable Twenty First Century WorldProf. Fiona M. Doyle
Materials
Venue: Crystal Ballroom Chairperson : Prof. Y. Mutah
1400 ‐ 1430 IM 5 Controlled Ball Impact Process ‐ A New Approach for the Development of Nanocrystalline Surfaces Prof. R. Gnanamoorthy, M. Kodeeswaran and N. Arun Prakash
15
Day 3 (morning). INVITED SPEAKERS
Materials Venue: Crystal Ball Room
Chairperson : Prof. Che Husna Azhari
0900 ‐ 0930 IM 6 Mixed Matrix Membrane Material for Gas Separation: Current Status and Future Potential Prof. Ahmad Fauzi Ismail and F. Aziz
Materials
Venue: Crystal Ballroom Chairperson : Prof. Ahmad Fauzi Ismail
1100‐1130 IM 7 Failure of a Locking Compression Plate during the Treatment of Fractured Femur C. Kanchanomai, P. Muanjan and V. Phiphobmongkol
16
Parallel Session. DAY 1: MINERALS & ENVIRONMENTAL
Session 1A: Minerals & Environmental
Venue: Rafflesia Chairperson : Dr. Samayamutthirian Palaniandy1110 ‐ 1130 EV 1 Development of Crystal Glass Pellets Using Processed Ex‐mining Sand from Syarikat
Paling Kenangan Sdn. Bhd. M.Haniza, M.N. Ahmad Fauzi and H.Hashim
1130 ‐ 1150 EV 2 Characterisation of Clay Deposits and Its Evaluation for Industrial Use Khor Peng Seong, Eric Goh and Kamar Shah
1150 ‐ 1210 EV 3 Geological Influence on Soil Erosion: Case Study from Pos Selim ‐ Cameron Highlands Road, Perak ‐ Pahang. Abdul Ghani Rafek and Sheelajini Paramjothy
1210 ‐ 1230 EV 4 Malaysian Feldspar: Evaluation and Processing of Some Selected Deposits Md. Muzayin Alimon and Nazwin Ahmad
1230 ‐ 1250 EV 5 Morphology, Mineralogy and Physical Characteristics of Tanjung Bin Coal Ash Marto, A., Makhtar, A.M, Lee, F. W., Yap, S. L., and Muhardi
Session 1B: Minerals & Environmental
Venue: Rafflesia Chairperson : Dr. Norlia Baharun 1450 ‐ 1510 EV 6 A Huge Potential of Purposeful Utilisation of Coal Ash for Reclamation of Open Pit
Mines‐ A Case Study from India M. Jawed and S.K. Dube
1510 ‐ 1530 EV 7 Synthesis of Zeolites from Low Grade Bidor Kaolin and Its Potential Utilization in Waste Treatment Shamsul Kamal Sulaiman
1530 ‐ 1550 EV 8 Synthesis of Nano α and γ Alumina From Aluminium Dross Waste Meor Yusoff M.S., Wilfred Paulus and Masliana Muslim
1550 ‐ 1610 EV 9 Effect of Magnetization on the Leaching of Limonitic Ore Hadi Purwanto and Pramusanto
Session 1C: Minerals & Environmental
Venue: Rafflesia Chairperson : Dr. Meor Yusof Meor Sulaiman1630 ‐1650 EV 10 Mechanical Activation of Minerals – Past, Present and Future?
N.J.Welham and J.Rowe 1650 ‐1710 EV 11 Synthesis and Characterization of Nanocrystalline Zeolite ZSM‐5
Niken Taufiqurrahmi, Abdul Rahman Mohamed and Subhash Bhatia 1710 ‐1730 EV 12 Preparation of SiO2/TiO2 Catalyst by the Chemical Precipitation and Ion Exchange
Method Nazwin Ahmad and Md. Muzayin Alimon
1730 ‐1750 EV 13 Exploration of Flow Dynamics within Fluidized Jet Mill via Computational Fluid Dynamics (CFD) Approach Sri Raj Rajeswari Munusamy, Khairun Azizi Mohd Azizli, Mohd Zulkifly Abdullah, Syed Fuad Saiyid Hashim and Muhammad Khalil Abdullah
17
Parallel Session. DAY 2: MINERALS & ENVIRONMENTAL
Session 1D: Minerals & Environmental Venue: Rafflesia
Chairperson : Prof. F. Saito 0930 ‐ 0950 EV 14 Ultrasonic Purification of Fly‐Ash
S. Santosh Kumar, B. Ambedkar and R. Nagarajan 0950 ‐ 1010 EV 15 Current and Future Applications of Micro‐organisms to Mineral Processing
James Rowe 1010 ‐ 1030 EV 16 Fine Coal Beneficiation Using Floatex Density Separator – A Theoretical and
Experimental Study of the Separation Efficiency Avimanyu Das, Biswajit Sarkar and Surya Pratap Mehrotra
Session 1E: Minerals & Environmental
Venue: Rafflesia Chairperson : Dr. E. Bauer‐Grosse 1130 ‐ 1150 EV 17 The Effects of Fine Grinding on the Physicochemical Properties of Potash Feldspar
Munirah Othman and Samayamutthirian Palaniandy 1150 ‐ 1210 EV 18 Enhancing Natural Fiber/Matrix Interaction via Fiber Surface Modification
L. J. L Diaz, S. M. C Hagad, T. K. J Reyes and K. M. J. Rafols 1210 ‐ 1230 EV 19 Indonesia Forest Fire Effect on the Total Column Atmosphere Methane CH4 over
Peninsular Malaysia from Atmospheric Infrared Sounder (AIRS) Jasim M.Rajab., M. Z. MatJafri, H. S. Lim and K. Abdullah
1230 ‐ 1250 EV 20 Germination of Ficus Seeds for Rehabilitation Purposes Ayu Wazira Azhari, Abdul Haqi Ibrahim and Ain Nihla Kamarudzaman
Session 1F: Minerals & Environmental
Venue: Rafflesia Chairperson : Prof. Khairun Azizi Mohd Azizli1430 ‐ 1450 EV 21 Sintering Behavior of MSW Incineration Bottom Ash
Supawan Vichaphund, Sirithan Jiemsirilers and Parjaree Thavorniti 1450 ‐ 1510 EV 22 Waste to Valuable By‐Product: Palm Oil Mill Decanter Cake and Its Ability to Remove
Cd, Cu and Pb Ions N. Dewayanto, M. Z. Sahad and M. R. Nordin
1510 ‐ 1530 EV 23 An Expert System for Soil Stabilization during Construction Activities Leila Ooshaksaraie, Noor Ezlin Ahmad Basri, Othman Jaafar, Khairul Nizam Abdul Maulud and Azuraliza Abu Bakar
1530 ‐ 1550 EV 24 Effect of Multi‐walled Carbon Nanotubes (MWNT) on Basic Soil Properties of Residual Soil Nuraini. R, Taha. M. R and Basri. N. E. A
18
Parallel Session. DAY 3: MINERALS & ENVIRONMENTAL
Session 1G: Minerals & Environmental Venue: Rafflesia
Chairperson : Mr. James Rowe
0930 ‐ 0950 EV 25 Recovery of a High‐Valued Product from Combustion Waste of High Sulfur Coal Manoj K. Mohanty, Fan Yang, Baojie Zhang and Richard Geilhausen
0950 ‐ 1010 EV 26 Carbon and Nitrogen Removal in a Submerged Membrane Bioreactor (MBR) Treating Wastewater from Natural Rubber Glove Manufacturing Industry S. Pretibaa and M.N. Zairossani
1010 ‐ 1030 EV 27 Development of Novel Multifunctional Membrane with Capability of Detecting Heavy Metal Ions Linzi Zhang, Yonghong Zhao and Renbi Bai
19
PROGRAMME DETAILS
Parallel Session. DAY 1: NANOMATERIALS
Session 2B: Nanomaterials
Venue: Orchid 1 Chairperson : Dr. Alberto Amorsolo 1450 ‐ 1510 NM 6 The Effect of B and Ni Co‐Doped TiO2 Film Coated on Glass Substrate
Lek Sikong, Mahamasuhaimi Masae, Kalayanee Kooptarnond and Wirat Tawiprida 1510 ‐ 1530 NM 7 Effect of Substrates on Film Hardness Measurements of Nanometer Thick Amorphous
Carbon Films Hiroki Akasaka, Hiroki Ito, Masayuki Nakano, Shigeo Ohshio and Hidetoshi Saitoh
1530 ‐ 1550 NM 8 Thermal Transport Phenomenon on Turbulent Circular Tube Fluid Flow Including Nano‐Diamonds Shuichi Torii
1550 ‐ 1610 NM 9 Coprecipitation Synthesis of Zn Substituted Co Ferrite Nanoparticles and its Magnetic Properties J. Amighian, S. Manouchehri, M. Mozaffari and M. H. Yousefi
Session 2C: Nanomaterials
Venue: Orchid 2 Chairperson : Assoc. Prof. Dr. Azizan Aziz1630 ‐1650 NM 10 Fabrication of One‐dimensional Composition Modulated Nanostructures by
Template‐assisted Electrodeposition K. Y. Kok, I. K. Ng and N. U. Saidin
1650 ‐1710 NM 11 Formation of Helical Nanostructures by Film Deposition on Straight Nanowires Mikio Moraoka and Takahiro Adachi
1710 ‐1730 NM 12 High Yield Synthesis Carbon Nanotubes by Vertical Reactor Floating Catalyst Method Thamer H.A, Mohd Amran M.S and Abd. Rahim A.T
Session 2A: Nanomaterials Venue: Orchid 1
Chairperson : Dr. Zainovia Lockman 1110 ‐ 1130 NM 1 Low Temperature Crystallization of High Surface Area Sol‐Gel Derived Zirconia
Nanoparticles by Base‐Hot‐Water Treatment Niki Prastomo, Hiroyuki Muto, Mototsugu Sakai and Atsunori Matsuda
1130 ‐ 1150 NM 2 Detection of NO2 Gas Using MWCNT/WO3 Films Vibha Srivastava, Kiran Jain and Chhotey Lal
1150 ‐ 1210 NM 3 Defects Analysis of UV Ozone and Acid Treated Multiwall Carbon Nanotubes A. B. Sulong, C. H. Husna, R. Zulkifli, M. R. Othman and J. H. Park
1210 ‐ 1230 NM 4 Optimization of Acid Ratios for Liquid Phase Oxidation of Multi‐walled Carbon Nanotubes Mohd Lokman Ibrahim, Alias Mohd Yusof and Nor Aziah Buang
1230 ‐ 1250 NM 5 Synthesis of Anatase TiO2 Nanorods by Hydrothermal Method and Post‐Heat Treatment Siriphan Chainarong, Lek Sikong, Sorapong Pavasupree and Sutham Niyomas
20
Parallel Session. DAY 1: CERAMICS MATERIALS
Session 3B: Ceramics Materials
Venue: Orchid 2 Chairperson : Dr. Andanastuti Muchtar1450 ‐ 1510 CM 6 Modification of Sodium Monmorillonine by Phosphonium Salts
Emad A. Jaffar Al Mulla, Wan Md. Zin Wan Yunus, Nor Azowa Ibrahim and Mohd Zaki Abd. Rahman
1510 ‐ 1530 CM 7 Effects of Backbone Polymer on Alumina Injection Moulding Feedstock L. Chotirat, A. Manonukul1, R. Sanngam, S. Vichaphund, T. Panyathanmaporn and P. Thavorniti
1530 ‐ 1550 CM 8 Improved Fracture Toughness of Hydroxyapatite Bioceramics C. Y. Tan, S. Ramesh, R. Tolouei, I. Sopyan and W. D. Teng
1550 ‐ 1610 CM 9 Particle Size Analysis Using Laser Diffraction Technique Nor Hafizah Hj Annuar, K S Tan and A Olofinjana
Session 3A: Ceramics Materials Venue: Orchid 2
Chairperson : Prof. Ahmad Fauzi Mohd Noor1110 ‐ 1130 CM 1 A Comparative Study of Yttrium Iron Garnet (Y3Fe5O12) Prepared Using Sol‐Gel,
Mechanical Alloying and Conventional Techniques Noorhana Yahya, Muhammad Kashif, Hanita Daud, Nadeem Nasir, Maryam Shafri Jebeli, Hasnah Mohd Zaid, Afza Shafie and Tah Lee Teng
1130 ‐ 1150 CM 2 The Crystalline and Luminescent Properties of the Strontium Aluminate Doped Eu2O3 and Dy2O3 Rosli Hussin, Sinin Hamdan, Muhammad Shawal Husin, Dayang Nur Fazliana Abdul Halim and Musdalilah Ahmad Salim
1150 ‐ 1210 CM 3 Rapid Processing of CaCu3Ti4O12 Electroceramics Using a Domestic Microwave Oven Sabar D. Hutagalung, Nur Hawadah M. Subhi, Mohd Syahril M. Sharifudin and Zainal A. Ahmad
1210 ‐ 1230 CM 4 The Effect of Cerium Oxide on the Sinterability of Hydroxyapatite H. Kelvin, W. H. Yeo, K. L. Aw, C. Y. Tan, R. Talouei, S. Ramesh, W.D. Teng and I. Sopyan
1230 ‐ 1250 CM 5 Singularity Behavior Near the Interface of Bonded Piezoelectric Dissimilar Materials Toru Sasaki, Makoto Kasai and Toshimi Kondou
21
Session 3C: Ceramics Materials
Venue: Orchid 2 Chairperson : Assoc. Prof. Dr. Noorhana Yahya1630 ‐1650 CM 10 Surface Morphology of Low Thermal Expansion Coefficient (TEC) Glaze for Anorthite
Ceramics Doll Said Ngah, Jaafar Abdullah and Nurul Izza. M. Shopee
1650 ‐1710 CM 11 Positioning Ceramic Foam Filters In Gating System for Casting Alloy Filtration E. Bagherian, M. K. A. Ariffin, S. Sulaiman, M. R.Yas and A. R. Mojavertoosi
1710 ‐1730 CM 12 Residual Stress and Microcrack in Electrical Discharge Machining (EDM) Tungsten Carbide Material Pichai Janmanee and Apiwat Muttamara
1730 ‐1750 CM 13 Synthesis and Characterization of TiB2 ‐ Mullite Composite via Self‐Propagating High‐Temperature Synthesis Method Tawat Chanadee, Sutham Niyomwas and Napisporn Memongkol
Parallel Session. DAY 2: CERAMICS MATERIALS
Session 3D: Ceramics Materials Venue: Orchid 2
Chairperson : Prof. Ahmad Fauzi Mohd Noor0930 ‐ 0950 CM 14 Nanostructured and Conventional Yttria Stabilized Zirconia (YSZ) Coatings via
Atmospheric Plasma Spray Technique for Thermal Barrier Coatings Applications M. F. Fazira, N. Roslani, S. Istikamah, S. M. Mohamad and R. J. Talib
0950 ‐ 1010 CM 15 Ductile Regime Single Point Diamond Turning of CVD‐SiC Resulting in an Improved and Damage‐Free Surface Deepak Ravindra and John Patten
1010 ‐ 1030 CM 16 Vibrational Studies of Magnesium Silicophosphate R. Hussin, A.S. Musdalilah, K. Deraman, A.M. Suhaibah, A.F.S. Aishah, A.N. Shahira, A. Suhailah, H.M. Shawal, A.H.D Fazliana
22
Parallel Session. DAY 1: POLYMER
Session 4A: Polymer Venue: Hibiscus
Chairperson : Prof. Hanafi Ismail 1110 ‐ 1130 PM 1 Carbon Nanotubes – Rubber Blend (Natural Rubber – Styrene Butadiene Rubber)
Composite Lek Sikong, Phatcharee Phoempoon, Orasa Patarapaiboolchai
and Kalayanee Kooptanond
1130 ‐ 1150 PM 2 Thermoplastics Vulcanisates Based on Reclaimed Nitrile Rubber Gloves (R‐Nbrg) Dayang Habibah Abang Ismawi Hassim, Mazlina Mustafa Kamal and Rohaidah Abd Rahim
1150 ‐ 1210 PM 3 On the Surface Morphology, Mechanical and Tribological Properties of Blended DPNR/IR2200 Ramdziah Md. Nasir, N. S. M. El‐Tayeb, Siti Salina Sarkawi and Yusof Aziz
1210 ‐ 1230 PM 4 Novel Peroxide‐Vulcanized Electrically Conductive Rubber Blends K. C. Yong and Che Su Mt Saad
1230 ‐ 1250 PM 5 Tensile and Impact Properties of Thermoplastic Natural Rubber Reinforced with Different Types of Nanoclay Treated with Ultrasonic Mou'ad. A. Tarawneh, Sahrim Ahmad, S. Y. Yahya, Rozaidi Rasid, N.A. Hassan and E.Z.
Engku Zaharah
Session 4B: Polymer Venue: Hibiscus
Chairperson : Assoc. Prof. Dr. Hazizan Md. Akil 1450 ‐ 1510 PM 6 The Effect of Humidity on Silica‐Filled Natural Rubber Compound
Siti Salina Sarkawi and Che Su Mt. Saad 1510 ‐ 1530 PM 7 Effect of SBR And Additives Incorporation on Flame Retardancy and Thermal
Degradation of Unsaturated Polyester Filled Recycled Polystyrene Foam Composite K. Rasidan, M. Rahmah and M.M. Hafiz
1530 ‐ 1550 PM 8 Crash Energy Absorption of Composite Sandwich Structures F. Tarlochan
1550 ‐ 1610 PM 9 Tensile Properties and Crashworthiness Applications of Natural Woven Silk/Epoxy Composite Simin Ataollahi, R. A. Eshkoor, A. K. Ariffin, R. Zulkifli and C. H. Azhari
Session 4C: Polymer Venue: Hibiscus
Chairperson : Assoc. Prof. Dr. Mariatti Jaafar1630 ‐1650 PM 10 In Vitro Cytotoxicity and Cell Seeding Studies of Chitosan‐Silver Composite for
Potential Wound Management Application Salina Sabudin, Mohd Affandi Derman, Ismail Zainol and Kartini Noorsal
1650 ‐1710 PM 11 Formation and Evaluation of Lahar/High Density Polyethylene Composite as Structural Material for Household Biogas Digester Polinga, Lady Marianne E., Mercado, Candy C. and Polinga and Camilo A.
1710 ‐1730 PM 12 Characterization of Thermoplastic Polyurethane‐Cement Composite Clodualdo Aranas, Jovilyn Masiglat and Eduardo R. Magdaluyo, Jr.
1730 ‐1750 PM 13 Effect of Kaolin Content on Thermal Analysis of Polypropylene/Kaolin Composites S. S. Jikan, Z. M. Ariff and A. Ariffin
23
Parallel Session. DAY 2: POLYMER
Session 4D: Polymer Venue: Hibiscus
Chairperson : Prof. N. Takeda 0930 ‐ 0950 PM 14 Effect of Filler Shape and Size on the Properties of Silver Filled Epoxy Composite for
Electronic Applications Suriati Ghazali, Mariatti Jaafar and Azizan Aziz
0950 ‐ 1010 PM 15 A Study On The Effect Of Natural Weathering on Properties of Linear Low Density Polyethylene/Poly(Vinyl Alcohol) Blends Razif Nordin, H. Ismail, Z. Ahmad, and A. R. Rashid
1010 ‐ 1030 PM 16 Temperature Conditions for Purging of Hot Runner Manifold Wipoo Sriseubsai
Session 4E: Polymer Venue E: Hibiscus
Chairperson : Assoc. Prof. Dr. Rahmah Mohamad1130 ‐ 1150 PM 17 Cutting Characteristics of Piled‐Up Polycarbonate Sheets Subjected to Two‐Line Wedge
Indentation Excited by Ultrasonic Wave Shigeru Nagasawa, Takuya Takahashi, Yuya Masaki, Masatoshi Fujikura and Yasushi Fukuzawa
1150 ‐ 1210 PM 18 Onset of Ratchetting in Pressurised Fibre Glass Reinforced Epoxy (FRGE) Piping Subjected to Cyclic Axial Strain K. S. Basaruddin and A. Ayob
1210 ‐ 1230 PM 19 Ethylene Vinyl Acetate/Waste Tire Dust (EVA/WTD) Blends C.T. Ratnam, A.S.Z. Abidin and T.G. Chuah
1230 ‐ 1250 PM 20 Calcium Carbonate in Low Protein Natural Rubber Latex Films Roslim R. and Amir Hashim M.Y.
Session 4F: Polymer Venue: Hibiscus
Chairperson : Assoc. Prof. Dr. Azhar Abu Bakar1430 ‐ 1450 PM 21 Effect of Pro‐Degradant Additive on Thermo‐Oxidative Aging of Polypropylene Film
Noor Zalikha Mohamed Islam, Nadras Othman, Zulkifli Ahmad and Hanafi Ismail 1450 ‐ 1510 PM 22 Effect of Filler Loading on Electrical Conductivity of CNTs/Epoxy Nanocomposites
Hendra Suherman, Abu Bakar Sulong and Jaafar Sahari 1510 ‐ 1530 PM 23 Changes in Microstructure of Erodible Poly(1,3 – Bis (P‐Carboxyphenoxy Propane –Co‐
Sebacic Acid) (Cpp‐Co‐Sa) for Potential Drug Delivery Application Kartini Noorsal and Fatimah Suhaily Abdul Rahman
1530 ‐ 1550 PM 24 Investigation on The Potential of Submicron Ground Silica as Fillers in Natural Rubber Compound Siti Suhaida Idrus, Hanafi Ismail and Samayamutthirian Palaniandy
24
Parallel Session. DAY 3: POLYMER
Session 4G: Polymer Venue: Hibiscus
Chairperson : Prof. Che Husna Azhari 0930 ‐ 0950 PM 25 Sono‐Processing of Nano‐Composite Polymers
R. Nagarajan, B. Ambedkar, K. Anupama and A. Ravi Teja 0950 ‐ 1010 PM 26 Tensile Properties and Morphology of Linear‐Low Density Polyethylene (LLDPE)/Soya
Powder Composites Using Epoxidised Natural Rubber as a Compatibilizer Sam Sung Ting, Hanafi Ismail and Zulkifli Ahmad
1010 ‐ 1030 PM 27 Effect of Dione Pigment with Palm Oil Filled LLDPE upon Heat Aging A. Amir Fakhrul Islam, A.Noor Hudasuria, M.Rahmah and T.Hairaini
Session 4H: Polymer Venue: Hibiscus
Chairperson : Dr. Azura A. Rashid 1130 ‐ 1150 PM 28 Fabrication and Mechanical Characterization of Water‐soluble Resin Coated Natural
Fiber Green Composites Ken‐ichi Manabe and Tomoyuki Hayakawa
1150 ‐ 1210 PM 29 The Effect Of Ageing By Ultraviolet Degradation Of Polypropylene/Ethylene Propylene Diene Terpolymer/Paper Sludge Composites H. Salmah, I. Ismail, A. Nor Azwin
1210 ‐ 1230 PM 30 Feasible Study on the Degradable Blended Plastic Film San Myint, Suhardy Daud and Aye Aye Khaing
25
Parallel Session. DAY 1: METALLURGY
Session 5A: Metallurgy Venue: Crystal Ballroom
Chairperson : Dr. Projjal Basu 1110 ‐ 1130 MT 1 Preparation of Al Reinforced with TiB2‐Al2O3‐FexAly Composites Derived from Natural
Ilmenite Sutham Niyomwas
1130 ‐ 1150 MT 2 The Effect of Copper and Antimony on the Mechanical Properties of Pewter Alloys Made by Conventional and Microwave Powder Sintering Tasnim Firdaus Ariff, Brian Gabbitas and Deliang Zhang
1150 ‐ 1210 MT 3 Development of Plastic Joining Method using Indentation of Aluminum Bar to Aluminum Plate Ryo Matsumoto and Takahiro Chida
1210 ‐ 1230 MT 4 Asymmetric Rolling with Axial Force for AZ31 Magnesium Alloy and Mechanical Properties of Rolled Sheet Ikuo Yarita and Naoto Migakida
1230 ‐ 1250 MT 5
Recent Development in Surface Modification Processes for Stainless Steels E. Haruman, Y.Sun, T. F. Gul, Md. Asri and T. Mahmood
Session 5B: Metallurgy Venue: Crystal Ballroom
Chairperson : Dr. Nurulakmal Mohd Sharif1450 ‐ 1510 MT 6 Vanadis 4 Steel Behaviour in Semi Solid Zone Prior to Thixoforming Process
A. Alfan, M.Z. Omar, J. Syarif and M.J. Ghazali 1510 ‐ 1530 MT 7 Stability of β Phase in Ti‐15 Mass % Cr‐Fe Alloy for Biomaterial Application
Nuzul Ramdhani, Junaidi Syarif, Zainuddin Sajuri and Abdul Razak Daud 1530 ‐ 1550 MT 8 Effects of Process Parameters on the Mechanochemical Synthesis of Titanium Carbide
from Alternative Sources of Raw Materials Malek Ali , Projjal Basu and Zuhailawati Hussain
1550 ‐ 1610 MT 9 Slurry Jet Erosion Performances of B4C Reinforced Colmonoy 88 Laser Surface Alloyed 13Cr‐4Ni Stainless Steel R. C. Shivamurthy, M. Kamaraj, R. Nagarajan, S. M. Shariff and G. Padmanabham
Session 5C: Metallurgy Venue: Crystal Ballroom
Chairperson : Prof. R. Ganamoorthy 1630 ‐1650 MT 10 Prospects of Fe‐C‐Al‐Si Alloys as Oxidation Resistant Material
Sukomal Ghosh 1650 ‐1710 MT 11 Corrosion Behavior of Nickel Base Alloys for Coating Material on Anodic Structure.
Nor Akmal Fadil, Noda Kazuhiko and Tanabe Tomohiro 1710 ‐1730 MT 12 An Overview of Sensitization Dynamics in Ferritic Stainless Steel Welds
M.O.H. Amuda and S. Mridha 1730 ‐1750 MT 13 Fatigue Crack Initiation from Small Defects under Cyclic Compressive Stress in Bearing
Steel Yuichiro Hino and Hisao Matsunaga
26
Parallel Session (morning). DAY 2: METALLURGY
Session 2D: Metallurgy Venue: Orchid 1
Chairperson : Dr. Sabita Gosh 0930 ‐ 0950 MT 14 The Remaining Life Assessment of Steam Power Plant Turbine Casing by
Qualitative and Simulative Approach Winarto and Dedi Priadi
0950 ‐ 1010 MT 15 Analytical Study of the Deformation Behavior of Bolt‐Nut Fastener under Transverse Loading Toshio HattorI, Hairul Bakri, Minoru Yamashita and Kazumasa Sagou
1010 ‐ 1030 MT 16 Image Based EFIT Simulation for Nondestructive Ultrasonic Testing of Austenitic SteelKazuyuki Nakahata, Sohichi Hirose and Frank Schubertand Bernd Köhler
Session 5D: Metallurgy Venue: Crystal Ballroom
Chairperson : Prof.N. Ohtake 0930 ‐ 0950 MT 17 Tension‐Compression Asymmetry in Austenitic Stainless Steel Alloys for Electronic
Parts and Its Effect on Springback Behavior Toshihiko Kuwabara, Rena Saito, Takaaki Hirano and Nobuaki Oohashi
0950 ‐ 1010 MT 18 Measurement and Analysis of Ultra‐Thin Austenitic Stainless Steel Sheet under Biaxial Tensile Loading and In‐Plane Reverse Loading Satoko Murakoso and Toshihiko Kuwabara
1010 ‐ 1030 MT 19 Constitutive Modeling of Ultra‐Low Carbon Steel Sheet based on Biaxial Stress Tests Tatsuya Kimura, Eiji Isogai and Toshihiko Kuwabara
Parallel Session (late morning). DAY 2: METALLURGY
Session 2E: Metallurgy Venue: Orchid 1
Chairperson : Dr. Nurulakmal Mohd Sharif1130 ‐ 1150 MT 20 Lead‐Free Solder‐SWCNT Nano‐Composite Processing by Ultrasonic
Suchart Chantaramanee, Thawatchai Plookphol, Sirikul Wisutmethangoon and Lek Sikong 1150 ‐ 1210 MT 21 Dynamic Tensile Properties of Steels and Aluminum Alloys for a Wide Range of Strain
Rates and Strain Shinji Tanimura, Hiroyuki Hayashi, Terumi Yamamoto and Koji Mimura
1210 ‐ 1230 MT 22 Size Effect in Micro‐welding of Metallic Film by using Electron Beam Ming Yang, Hiroki Ogawa and Wei Guo
1230 ‐ 1250 MT 23 Lathe Turning with Oblique Cutting Mechanism for Reducing Tooling Cost Eitoku Nakanishi, Seijiro Maki and Toshiyuki Tanaka
Session 3E: Metallurgy Venue: Orchid 2
Chairperson : Dr. Sukomal Gosh 1130 ‐ 1150 MT 24 Influence of Second Phase Particle on Fatigue Crack Growth Behavior in
Ferrite Matrix Steels Mohammad Sukri Mustapa and Yoshiharu Mutoh
1150 ‐ 1210 MT 25 FE Modeling of Free Surface Roughening in Sheet Metal Considering Mesoscopic Inhomogeneity Based on Hardness Distribution Tsuyoshi Furushima, Kouji Nakata, Ken‐ichi Manabe and Sergei Alexsandrov
1210 ‐ 1230 MT 26 Overview and Functional Characterization of Pb– Free Solders Chin L. T, Tan K.S and Olofinjana A. O.
27
1230 ‐ 1250 MT 27 Effect of Sintering on Alloying Behavior and Microstructural Change of Ti‐10at.%Mo‐10at.%Cr Alloy Rohmannudin T.N, Syarif J, Omar M.Z, Sajuri Z and Daud A.R
Session 5E: Metallurgy Venue: Crystal Ballroom
Chairperson : Dr. Zainuddin Sajuri 1130 ‐ 1150 MT 28 Study of Distribution of Al2O3 Particles of Al/Al2O3 Metal Matrix Composites with
Different Mixing Medium Widyastuti, M. Zainuri, Alek and Sulistijono
1150 ‐ 1210 MT 29 Transmission Electron Microscopic Investigation on Electrodeposited NanocrystallinNi W Alloy Films A. S. M. A. Haseeb, M. Klimenkov and K. Bade
1210 ‐ 1230 MT 30 Improvement in Fatigue Life of Thermoelectric Modules Subjected to Cyclic Thermal Loading Nobuhiro Settsu, Manabu Takahashi, Keiji Ogi, Tomoya Deguchi, Nagatoshi Okabe, Shunsuke Tohin and Mitsuyoshi Tsutsumi
1230 ‐ 1250 MT 31 Forensic Analysis of a Sulfur Hexafluoride (SF6) Circuit‐Breaker Failure Ng Guat Peng, Iszuan Shah Syed Ismail, Mohd Noor Harun, Qua Hock Chye
Parallel Session (afternoon). DAY 2: METALLURGY
Session 2F: Metallurgy Venue: Orchid 1
Chairperson : Dr. Ir. Winarto 1430 ‐ 1450 MT32 Mechanical Properties of Porous Ti6Al4V Alloy by Spark Plasma Sintering Technique
Naritoshi Aoyagi, Shigeharu Kamado and Yo Kojima 1450 ‐ 1510 MT 33 Runner Balancing for a Multiple Cavity Die in High Pressure Die Casting Processes
Pongsak Dulyapraphant and Prarop Kritboonyarit 1510 ‐ 1530 MT 34 Sliding Wear Behavior of Tungsten‐Bronze Composites under Different Compositions
and Fe Sintering Additives M. S Kahtan, R. Azmi and I. Ahmad Badri
1530 ‐ 1550 MT 35 Improvement of Surface Flaw on Wire in Drawing Kazunari Yoshida and Atsuhiro Tanaka
Session 3F: Metallurgy
Venue: Orchid 2 Chairperson : Prof. A.S.M.A Haseeb 1430 ‐ 1450 MT36 Fabrication of High‐Quality Fine Medical Tubes by Fluid Mandrel Drawing
Kazunari Yoshida Youichi Oniduka and Sadatomo Yamashita 1450 ‐ 1510 MT 37 Effect of Zn Doping in Cu Catalysts on Methanol Steam Reforming Efficiency
Chanatip Samart, Prasert Reubroycharoen and Metta Charoenpanich 1510 ‐ 1530 MT 38 Mechanical Properties including Fracture Toughness Evaluation of Structural Steel with
the Ball Indentation Technique and its Finite Element Model Sabita Ghosh, Mita Tarafder, S. Sivaprasad and Soumitra Tarafder
1530 ‐ 1550 MT 39 Powder Forming for Waste Ground Chips of Bearing Steel Hitoshi Takagi
28
Session 5F: Metallurgy Venue: Crystal Ballroom
Chairperson : Prof. Y. Mutoh 1430 ‐ 1450 MT 40 Wear Behavior of TiN Coating during Stainless Steel Cutting Processes
K Tuchinda and K Wathanyu 1450 ‐ 1510 MT 41 Effects of Thermal Aging on Intermetallic Compound Formation in Sn‐1.2% Ag‐0.5% Cu
Solder Alloy with Nickel Dopant on Copper Organic Solderability (Cu OSP) Substrate Surface Finish Melissa B. Manauis and Alberto V. Amorsolo, Jr.
1510 ‐ 1530 MT 42 Effect of Sn on Brazeability of Ag‐Cu‐Sn Brazing Filler Metals L. Sisamouth, M. Hamdi and T. Ariga
1530 ‐ 1550 MT 43 Numerical Simulation of Negative Clearance Blanking Yusuke Takata and Kenji Hirota
Session 6F: Metallurgy Venue: Dahlia
Chairperson : Dr. Duangduen Atong 1430 ‐ 1450 MT 44 Effects of Crack Face Interference on Shear‐mode Fatigue Crack Growth
Daisuke Koyanagi, Naoya Shomura, Masahiro Endo, Hisao Matsunaga and Shigeaki Moriyama
1450 ‐ 1510 MT 45 The Increase of Reduction Ratio of Stress Wave Propagation Through Porous Materials Sotoaki Kida, Masaya Matsumoto and Keita Fukushima
1510 ‐ 1530 MT 46 Non Isothermal Kinetics Austenite Grain Growth in Nb‐HSLA Steel during Hot Rolling M. Ariati, Sutopo and E. S. Siradj
1530 ‐ 1550 MT 47 Computational Investigation of Fatigue Crack Growth of Pipes under Different Loading Conditions S. M. Beden, N. A. Al‐Asady , S. Abdullah and A. K. Ariffin
29
Parallel Session (morning). DAY 3: METALLURGY
Session 2G: Metallurgy Venue: Orchid 1
Chairperson : Prof. Hitoshi Takagi
0930 ‐ 0950 MT 48 Characteristic of Palladium Membrane on Alumina Support prepared by Electroless Plating Method Mettaya Kitiwan and Duangduen Atong
0950 ‐ 1010 MT 49 Microstructural Observation of Friction Welded Alumina‐Yttria Stabilized Zirconia (YSZ) Composite with 6061 Al Alloy Uday M. B., Ahmad Fauzi M.N, Zuhilawati H. and Ismail A.B.
1010 ‐ 1030 MT 50 Quenching Effects to Mechanical Properties and Corrosion Resistance on Welded Material Super Duplex UNS S 32750 M. Anis, P. A. Perdana, J. W. Soedarsono and D.Ferdian
Session 3G: Metallurgy
Venue: Orchid 2 Chairperson : Dr. Chanatip Samart
0930 ‐ 0950 MT 51 Failure Analysis of 4" Elbow Pipe Weld Crack M. Anis and Deni Ferdian
0950 ‐ 1010 MT 52 Effect of SiC on the Interface Bonding of Al/SiC‐Al/Al2O3 Laminate Hybrid Composites Dedi Priadi, Widyastuti, M. Zainuri , Anne Z and Eddy S Siradj
1010 ‐ 1030 MT 53 Simulation on Cast Metal Matrix Composite by Investment Casting Taufik, S. Sulaiman and T.A. Abdullah
Session 5G: Metallurgy Venue: Crystal Ballroom
Chairperson : Dr. Maryam Jameelah Ghazali
0930 ‐ 0950 MT 54 Microstructure and Mechanical Properties of Magnesium Matrix Composites obtained by Hot Compaction Technique Z. Zulkoffli, J.Syarif and Z. Sajuri
0950 ‐ 1010 MT 55 Effects of Anisotropic Yield Functions on the Accuracy of Forming Simulations of Bore Expansion Kazuma Hashimoto, Toshihiko Kuwabara, Eiji Iizuka and Jeong Whan Yoon
1010 ‐ 1030 MT 56 Pitting Corrosion on Failed Wheel Hub of the RMAF Beechcraft Mohd Yazid Ahmad, Syed Roslee Sayd Bakar and Shamsiah Kalil
30
Parallel Session (late morning). DAY 3: METALLURGY
Session 1H: Metallurgy Venue: Rafflesia
Chairperson : Prof. Shinji Tanimura
1130 ‐ 1150 MT 57 Effect of Copper Nano Powder Additions to Lead Free Solder Aemi Nadia and A.S.M.A Haseeb
1150 ‐ 1210 MT 58 Analysis of the Rotary Die Cutting Mechanism by FEM Yasushi Fukuzawa, Shigeru Nagasawa, Takayuki Sato, Hideaki Sakayori and Shigekazu Suzuki
1210 ‐ 1230 MT 59 Relation between Fatigue Slip Bands and Hydrogen Emission in Austenitic Stainless Steels Katsuya Hayashida, Hisao Matsunaga and Masahiro Endo
Session 2H: Metallurgy
Venue: Orchid 1 Chairperson : Dr. Maryam Jameelah Ghazali
1130 ‐ 1150 MT 60 Cutting Characteristics of Piled‐up Polycarbonate Sheets subjected to Two‐line Wedge Indentation Excited by Ultrasonic Wave Shigeru Nagasawa, Takuya Takahashi, Yuya Masak, Masatoshi Fujikura and Yasushi Fukuzawa
1150 ‐ 1210 MT 61 Numerical Simulation of Negative Clearance Blanking Yusuke Takata and Kenji Hirota
1210 ‐ 1230 MT 62 Improvement of Forging Process and Product Quality by FEM Simulation Method using a Simple Tensile Test Ken‐ichi Kanazawa, Hajime Hirokawa and Norishige Okimi
Session 3H: Metallurgy
Venue: Orchid 2 Chairperson : Prof. Ikuo Yarita
1130 ‐ 1150 MT 63 Influence of Interlayer on Mechanical and Tribological Properties of DLC Film Mai Takashima, Tsuyoshi Kuroda, Osamu Takai and Naoto Ohtake
1150 ‐ 1210 MT 64 Effect of Stress Ratio on Corrosion Fatigue Crack Growth Behavior of Magnesium Alloy AZ61 Shaifulazuar Bin Rozali, Yoshiharu Mutoh and Kohsoku Nagata
1210 ‐ 1230 MT 65 Evaluation of Lubricant Oil for Metal Forming of Stainless Steel by Cup Internal Ironing Test Kazuhiko Kitamura and Masato Katsuragawa
29
PROGRAMME DETAILS
Parallel Session. DAY 1: ELECTRONIC MATERIALS
Session 6B: Electronic Materials
Venue: Dahlia Chairperson : Dr. E. Bauer‐Grosse 1450 ‐ 1510 EM 6 Electrical Properties of Metal/Organic Semiconductor Solution Heterojunction
Kh. S. Karimov, M. Saleem, A. Fauzi and Z. M. Karieva 1510 ‐ 1530 EM 7 Photoluminescence Characterization of Quaternary InxAlyGa1‐x‐yN
S. K. Mohd Bakhori, S. S. Ng, H. Abu Hassan, Z. Hassan, K. Ibrahim 1530 ‐ 1550 EM 8 Surface Phonon Polariton Modes of Wurtzite Structure III‐Nitride Semiconductors
Sha Shiong Ng, Zainuriah Hassan and Haslan Abu Hassan 1550 ‐ 1610 EM 9 The Crystalline and Luminescent Properties of the Strontium Aluminate Doped Eu2O3
and Dy2O3 Rosli Hussin, Sinin Hamdan, Muhammad Shawal Husin, Dayang Nur Fazliana Abdul Halim and Musdalilah Ahmad Salim
Session 6C: Electronic Materials
Venue: Dahlia Chairperson : Prof. Ahmad Fauzi Ismail1630 ‐1650 EM 10 Electrochemical Behavior of Mesoporous Tin Phosphate Anode upon Reaction with
Lithium Siti Munirah Hasanaly, Mohamad Azmi Bustam and Zakaria Man
1650 ‐1710 EM 11 Effect of Oxidation Temperature on the Copper Oxide as a Buffer Layer for Superconductor on Cu RABiT Substrate N. A. Mustaffa and Z. Lockman
1710 ‐1730 EM 12 The Effect of Metal‐Molecule Coupling Strength on Electron Transport in Molecular Assembly System Aissa Boudjella
1730 ‐1750 EM 13 Electrodeposition of Co‐Ni‐Cu Thin Films From Sulphate Solutions Containing Glucopone 215 CSUP Setia Budi, Shahidan Radiman and Abdul Razak Daud
Session 6A: Electronic Materials Venue: Dahlia
Chairperson : Dr. Sabar Derita Hutagalung1110 ‐ 1130 EM 1 The Impact of the Insertion of a 10nm Anode Interlayer on the PLED Stability
B. K. Yap and D. D. C. Bradley 1130 ‐ 1150 EM 2 Effect of Annealing on the Electrical Properties of Metal‐Insulator‐Semiconductor (MIS)
Structure with AlN Dielectric A. Mahyuddin, Z. Hassan and K. Y. Cheong
1150 ‐ 1210 EM 3 In situ TEM Observation of Phase Transformations in Amorphous Fe1‐x Cx Thin Films Around x ∼ 0.28‐0.32 Elizabeth Bauer‐Grosse
1210 ‐ 1230 EM 4 Spin‐Orbit Splitting Effect on Structural Properties Calculations of III‐V and II‐VI Compounds A. Y. Al‐Douri, N. M. Ahmed, U. Hashim and A. Boudjella
1230 ‐ 1250 EM 5 Structural and Transport Properties of Gd2O3 Nanoparticulate Addition on (Bi,Pb)‐2223 Superconductor S. S. H. Ravandi, S. A. Halim, M. A. Shafaei, S. K. Chen, K. P. Lim, H. Baqiah, Kazem Naghavi and Hojjat Soleimani
30
Parallel Session. DAY 2: ELECTRONIC MATERIALS
Session 6D: Electronic Materials Venue: Dahlia
Chairperson : Dr. Zainovia Lockman 0930 ‐ 0950 EM 14 New Mesogenic Schiff Base Ester Comprising Benzothiazole Moiety: Synthesis and
Liquid Crystalline Properties Sie‐Tiong Ha, Teck‐Ming Koh, Lay‐Khoon Ong, Guan‐Yeow Yeap, Hong‐Cheu Lin, Peng‐Lim Boey and Siew‐Teng Ong
0950 ‐ 1010 EM 15 Ductile Regime Single Point Diamond Turning of CVD‐Sic Resulting in an Improved and Damage‐Free Surface. Deepak Ravindra and John Patten
1010 ‐ 1030 EM 16 Head in Pillow (HIP) and Yield Study on SIP and PoP Assembly Dongji Xie, Dongkai Shangguan and David Geiger, Dinesh Gill, Varatharajan Vellppan and Karuna Chinniah
Session 6E: Electronic Materials
Venue: Dahlia Chairperson : Ir. Dr. Cheong Kuan Yew1130 ‐ 1150 EM 17 Effect of Annealing on Structural and Optical Properties of SnO2 and ZnO Thin Films
Norhashimah Ramli, Izura izzuddin, Muhamad Mat Salleh, Muhammad Yahaya and Mohammad Hafizuddin Haji Jumali
1150 ‐ 1210 EM 18 Influence of Process Gas Conditions upon Fabrication of Titanium Dioxide Coating by Cold Spray Motohiro Yamada, Yuko Kandori, Kazunori Sato, Toshiaki Yasui and Masahiro Fukumoto
1210 ‐ 1230 EM 19 The Comparison Between Anodic Oxide Formed on Titanium and Zirconium Foils Anodised in Fluorine Contained Electrolyte Zainovia Lockman, Syahriza Ismail, Zainal Ariffin Ahmad and Andrey Berenov
1230 ‐ 1250 EM20 Synthesis of Zinc Oxide Nanospheres and Nanorods by Self Combustion Technique Poppy Puspitasari, Noorhana Yahya, Noor Asmawati M. Zabidi, Shikh Mohd Shahrul Nizan Shikh Zahari and Nur Azliza Ahmad
Parallel Session. DAY 3: ELECTRONIC MATERIALS
Session 6G: Electronic Materials Venue: Dahlia
Chairperson : Assoc. Prof. Dr. Rosli Hussain0930 ‐ 0950 EM 21 Mechanical Cycling: An Alternative to Thermal Cycling for Reliability Testing of
Interconnect Materials Used in Electronic Packaging M.A.Hashim and A.Rahmat
0950 ‐ 1010 EM 22 Material Development In Intermediate Temperature Solid Oxide Fuel Cells (IT‐SOFCs) : A Review N. Sastaviana, A. Muchtar, W. R. W.Daud, N. Muhamad and E. H. Majlan
1010 ‐ 1030 EM 23 Formation of Zirconia Nanotubes Array by Anodisation Syahriza Ismail and Zainovia Lockman
34
4th RAMM and 2nd ASMP 2009
Tentative Programme for Poster Presenters
Please note that the poster session is on the 2nd day (2nd June 2009) at 1610‐1730. During the session there will be a poster competition. Poster presenter must be present for this judging period.
LIST OF POSTER PRESENTATION: Ceramics (Venue: Foyer Hexagonal Level 1) PCM 1 Structural Studies of Magnesium Calcium Titanate System Doped with Eu2O3
Siti Aishah Ahmad Fuzi, Rosli Husin, Mutia Suhaibah Abdullah dan Dayang Nur Fazliana Abdul Halim
PCM 2 The Local Structures of E2O3, Dy2O3 Doped Strontium Aluminate Probe by Vibrational Spectroscopy Rosli Hussin, Sinin Hamdan, Muhammad Shawal Husin, Dayang Nur Fazliana Abdul Halim and Musdalilah Ahmad Salim
PCM 3 Study and Characterization of SrFe12O19 Prepared by Sol‐Gel MethodNorshafarina Ismail and Azizah Shaaban
PCM 4 δ‐ Bi2O3 Thin Film Coating on Gilded Gold Substrate by Electrophoretic Deposition Method (EPD) Dedikarni, A. Muchtar, N. Muhamad and W. R. W. Daud
PCM 5 Synthesis and Characterization of Gd doped Mg‐Mn Ferrite SystemChong Wee Loon, Aye Aye Thant, Srimala Sreekantan and M. N. Ahmad Fauzi
PCM 6 Microstructure Study on Compact Natural Hydroxyapatite: Investigate The Effect of Different Sintering Conditions. M. A. Sri Asliza, H. Shahrizal and K. Zaheruddin
PCM 7 Effect Of Bi And Ti Additions on The Phase Formation of Bi4ti3O12 Using Fuel‐Free Combustion Method A. U. Al‐Amani, S. Sreekantan and M. N. Ahmad Fauzi
PCM 8 Synthesis and Characterization of MgFe2O4 Ferrite by Citrate Precursor Method Nilar Lwin, Aye Aye Thant, Srimala Sreekantan, Radzali Othman and Ahmad Fauzi M.N.
PCM 9 A Comparative Study of Green Alumina Foams Prepared by Microwave and Conventional Drying Hamimah Abd.Rahman, Mastura Shariff and Norwahdah Rahmat
PCM 10 Preparation of Homogeneous Feedstock for Alumina Powder Injection Moulding L. Chotirat, A. Manonukul, R. Sanngam, S. Vichaphund, T. Panyathanmaporn and P. Thavorniti
PCM 11 Microstructure Study on Compact Natural Hydroxyapatite: Effect of MgO as Additive To The Compact Natural Hydroxyapatite Sri Asliza M. A, Nurnadia M. Y and Zaheruddin K
PCM 12 Dielectric Properties of Ca Cu3Ti4 O12 Doped with Bi2O3
Julie Juliewatty Mohamed Wei X. L., Mohamed J. J. PCM 13 Reinforcement of β‐Tcp Bioceramic by Addition of Al2O3
Hazman Seli, Shah Rizal Kasim, Nur Azam Badarulzaman, Mohd Al Amin Muhamad Nor and Zainal Arifin Ahmad
PCM 14 Influence of RE‐OA‐H3PO4 Acid Solution on Formation of Porous Anodic Aluminium Oxide (AAO) Thin Film Juyana A.Wahab, M. Norsuria, M.N.B. Derman and A.H Iqhwan
PCM 15 Coir Fiber Reinforced Cement‐Albumen Based Composite: Effect of Fiber Length on the Strength S. Norshahida and A. Zuraida
35
PCM 16 The Use of Lignosulfonate as Sacrificial Agent to Reduce the Adsorption of Surfactant onto Kaolin Nik Muhammad Azhar Nik Daud, Radzuan Junin, Ahmad Kamal Idris, Muhammad A. Manan, Wan Mohammad Kamal Wan Jaafar,Norhisyam Ismail, Mohd Amirrul Arshad
PCM 17 Coir Fiber Reinforced Cement‐Albumen Based Composite: Effect of Fiber Length on theStrength S. Norshahida and A. Zuraida
PCM 18 The Effect of Fuel Types on Porous Alumina Produced via Soft Combustion Reaction for Biomedical Applications Radin Shafinaz Jamil, Nurfateen Fakhariah Ahmad, Khairunisak Abdul Razak and Hasmaliza Mohamad
LIST OF POSTER PRESENTATION: Electronic Materials (Venue: Foyer Hexagonal Level 1) PEM 1 XRD Characterization of InxAlyGa1‐x‐yN Quaternary Alloys
N. H. Abd Raof, S.S. Ng, H. Abu Hassan and Z. Hassan PEM 2 FTIR Analysis of Photosensitive Polyimide with Process Time Delay in Photolithography
Process Karen H.L. Ang, Kuan Yew Cheong, Azmi Abdul Malik, Cheue Lih Lim, Danny Tan, Michael B. C. Khoo
PEM 3 Organic‐on‐Inorganic Ag/VOPc/n‐Si/Ag Photocapacitive SensorKh. S. Karimov, A. Fauzi, M. Mahroof‐Tahir, I. Qazi, I. Murtaza and Z. M. Karieva
PEM 4 Microstructure Characterisation of SDC–Carbonate Composite Electrolytes Produced by Solid State Method for Solid Oxide Fuel Cells Jarot Raharjo, A. Muchtar, N. Muhamad, W.R.W. Daud and E.H. Majlan
PEM 5 Structural Properties of III‐V Compounds under Pressure Effect: An Application StudyY. Al‐Douri
PEM 6 The Effects of Surface Roughness on the Broadening of Surface Phonon‐Polariton Peak of AlxGa1‐xN Thin Films Sha Shiong Ng, Zainuriah Hassan and Haslan Abu Hassan
PEM 7 Studies of Conductivity and Dielectric Behaviour of (PVDF‐HFP)/PVC‐LiBF4 Solid Polymer Electrolytes N.H. Basri, S.A. Hashim Ali and N.S. Mohamed
PEM 8 Atomic Ordering Processes in Magnetic Shape Memory (MSM) Ni50Mn50‐xGax full Heusler Alloys Amdulla O. Mekhrabov, M. Vedat Akdeniz and C. Topbasi
PEM 9 Effect of Concentration on the CuO Thin Film Formed on Glass and ITO by Chemical Solution Deposition (CSD) Process Nur Aimi Jani, Zainovia Lockman and Ahmad Fauzi Mohd Noor
PEM 10 Effect of Nozzle‐Substrate Distance on Physical Properties of SiO2 Deposited on Silicon by Ultrasonic Spray Pyrolysis Cahyo B. Nugroho, Kuan Yew Cheong, Ahmad Fauzi and Zainovia Lockman
PEM 11 Luminescent Properties of Magnesium Calcium Tellurite doped with Eu2+ and Dy3+ Nur Shahira Alias, Rosli Hussin, Sinin Hamdan, Musdalilah Ahmad Salim, Siti Aisyah Ahmad Fuzi, Mutia Suhaibah Abdullah, Suhailah Abdullah, Dayang Nur Fazliana, Muhammad Shawal Husin and Mohd Nor Md Yusof
PEM 12 ZrO2 Nanotubes Formation by Anodisation of zirconium in Aques Solution Syahriza Ismail and Zainovia Lockman
PEM 13 Study of Radius Size Effects on Vertical Cavity Surface Emitting Laser Performance Farah Z. Jasim, Khalid Omar and Z. Hassan
PEM 14 Influence Of Heat Treatment Conditions on Photocatalytic Properties of Oxidized TiN filmD. Yonekura, Y. Harauchi, S. Katsura and R. Murakami
PEM 15 Liquid Crystal Properties of New Schiff Bases with Different Alkyl Chains and Dialkylamino End Groups
36
Sie‐Tiong Ha, Lay‐Khoon Ong, Teck‐Ming Koh, Guan‐Yeow Yeap, Hong‐Cheu Lin, Yip‐Foo Win, Siew‐Teng Ong and Peng‐Lim Boey
PEM 16 Measurement of Refractive Index and Reflectivity during Growth of Fiber Bragg GratingBashir Ahmed Tahir, Ho Sze Phing, Jalil Ali and Rosly Abdul Rahman
PEM 17 Artificial Intelligent Model to Predict Surface Roughness in Laser Machining M. M. Noor, K. Kadirgama, M. R. M. Rejab, M. M. Rahman, Rosli A. Bakar and H. Ismail
PEM 18 Effect of Seed Layer on the Formation of ZnO by AnodisationZainovia Lockman, Khairunisak Abdul Razak and Low Cheah Li
PEM 19 Effect of Oxidation Temperature on the Copper Oxide as a Buffer Layer for Superconductor on Cu RABiT Substrate N. A. Mustaffa and Z. Lockman
LIST OF POSTER PRESENTATION: Nanomaterials (Venue: Foyer Hexagonal Level 1) PNM 1 Characterization of Gold Nanoparticles Synthesized by Gamma Irradiation and the
Influence of Radiation Dose on the Size and Density of Gold Nanoparticles Kazem Naghavi, Elias Saion, Wan Mahmood Mat Yunus, M. A. Shafaei, Sh. Ravandi and Kh. Rezaee
PNM 2 Synthesis and Characterization Of Ni0.8Zn0.2 Fe2 O4 Nanoparticles by Self Combustion Technique Nur Azliza Ahmad, Noorhana Yahya, Hanita Daud, Poppy Puspitasari and Shikh Shahrul Mohd Nizan Shikh Zahari
PNM 3 Nanophotonics for Application in Solar Cell ConcentratorsB. Samini, Geok Bee Teh, Yun Seng Lim and N. Saravanan
PNM 4 Preparation of Nano Porous Aluminum Formed in Neutral ElectrolyteAlaba O. Araoyinbo, Ahmad Fauzi M. N, Srimala Sreekantan and Azizan Aziz
PNM 5 Hydrogen Storage Property of Nanoporous Carbon Materials Prepared From Rice HusksIkumi Toda, Hiroki Ono, Tomokazu Takahata, Shigeo Ohshio, Hiroki Akasaka, Syuuji Himeno, Toshinori Kokubu and Hidetoshi Saitoh
PNM 6 Studies on Mechanical, Thermal, and Morphological Properties of Epoxy/Carbon Nanotube Nanocomposite Tan Pi Lin and Chow Wen Shyang
PNM 7 Preliminary Studies of Carbon Fibres Deposited with Carbon Fibres Deposited with Carbon Nanotubes (CNT) via Electrophoretic Deposition (EPD) Technique Mohd Roslie Ali, Ahmad Nizam Abdullah and Shahrul Nizam Md Salleh
PNM 8 Nanostructure‐induced Superhydrophobicity for Self‐cleaning Surface I. K. Ng, K. Y. Kok, N. U. Saidin and T. F. Choo
PNM 9 The Influence of preheater Set Temperature on the Synthesis of Carbon Nanotubes via Floating Catalyst Chemical Vapour Deposition Method Dayang Radiah, A.B, Mahmood R.A, Zurina Z.A, Fakhrul’l Razi A, Intan S.A and Faizah M.Y
PNM 10 Physical and Impact Properties of Biopolymer Cotton/Clay (BCC) Nanocomposites Y. Yusliza, A. Zuraida, I. Sopyan, S. L. Teoh and S. Kumaran
PNM 11 ZnO Nanorods Formation on Thermal Oxidised Zn FoilZainovia Lockman, Tan Wai Kian, Khairunisak Abdul Razak and Kamarulazizi Ibrahim
PNM 12 Titania Nanotubes Formation by AnodisationZainovia Lockman, Syahriza Ismail and Srimala Sreekantan
LIST OF POSTER PRESENTATION: Polymer Material (Venue: Foyer Hexagonal Level 1) PPM 1 Properties of Chitosan Filled Recycled Polyethylene Biopolymer
Azieyanti Nurain Azmin and H. Salmah PPM 2 Studies on Mechanical, Thermal, and Morphological Properties of Epoxy/Carbon Nanotube
Nanocomposite Tan Pi Lin and Chow Wen Shyang
PPM 3 Thermal Degradation Analysis of Biodegradable Polypropylene Composites Containing Cassava Starch and Microcrystalline Cellulose
37
Viboon Sricharoenchaikul, Eakkapon Aramrusmevanichand and Duangdao Aht‐Tong PPM 4 Effect Of Chemical Treatment On Thermal Degradation Properties pof Kenaf Fibre
Unsaturated Polyester Composites M.A. Rabiah, M.Y. Khamizatul Zurnainah, M. Rahmah and R.Suzana
PPM 5 Preliminary Studies of Rubber Toughened Polypropylene – Kenaf Fiber Composite H.H. Hairuddin, S. Muddath, H. Anuar and N.A. Jamal
PPM 6 The Effect of 3‐(Trimethoxysilyl) Propyl Methacrylate on the Flexural and Fracture Toughness Properties of Poly(methyl methacrylate)/Hydroxyapatite Composites Tham Wei Ling, Chow Wen Shyang and Zainal Arifin Mohd Ishak
PPM 7 Development of Chitosan Silver Composite through In Situ Photo Reduction Method by UV Irradiation Technique Mohd Affandi Derman, Mohd Salihuddin Wan Mohamed, Ahmad Fuad Yahya, Ismail Zainol and Kartini Noorsal
PPM 8 The Mechanical Properties of Chitosan Filled Polypropylene (PP) Composites: The Effect of Acrylic Acid A. Faisal and H. Salmah
PPM 9 The Effects of Deformation by Compression on Composite Graphite ‐PP Properties Mohd Zulkefli Selamat, Jaafar Sahari, Norhamidi Muhamad and Andanastuti Muchtar
PPM 10 Fracture Behavior of Cross‐Ply Biodegradable Composite MaterialsHitoshi Takagi
PPM 11 Characterization of Mechanical AND Morphological properties: Low Density Polyethylene Nanocomposite using Nano α‐Alumina Particle as Filler Jenney Ngu Lim Song, Luqman Chuah Abdullah, Thomas Choong Shean Yaw, Azowa Ibrahim, Hasmaliza Mohamad and Chantara Thevy Ratnam
PPM 12 Mechanical Properties of Kenaf Fiber Reinforced PVC/EVA Blend Composites Nurfatimah Abu Bakar, Luqman Chuah Abdullah and Chantara Thevy Ratnam
PPM 13 Enhancing Natural Fiber/Matrix Interaction via Fiber Surface Modification L. J. L Diaz, S. M. C. Hagad, T. K. J. Reyes and K. M. J. Rafols
PPM 14 Extrude Swell and Melt Fracture of Polypropylene/Kaolin Composites at High Shear Stress S. S. Jikan, Z. M. Ariff and A. Ariffin
PPM 15 Photodegradation of LDPE Containing Gelatin Encapsulated Benzophenone Duangdao Aht‐Ong and Naritsara Sriklueab
PPM 16 The Effect of Maleic Acid as a Compatibilizer on Properties of Linear Low Density Polyethylene/poly(vinyl alcohol) Blends Razif Nordin, H. Ismail, Z. Ahmad and A. R. Rashid
PPM 17 Erosion Studies of Prepolymer of 1,3‐bis(p‐carboxyphenoxy)propaneFatimah Suhaily Abdul Rahman and Kartini Noorsal
PPM 18 Determination of Degree of Deacetylation and Characteristic of Modified Chitosan And Low Molecular Weight Chitosan Using Ftir Ku Marsilla Ku Ishak, Zulkifli Ahmad and Hazizan Md Akil
PPM 19 Surface Analysis of Degraded Polyanhydrides Using Atomic Force Microscopy (AFM) Syazana Abu Bakar, Fatimah Suhaily Abdul Rahman and Kartini Noorsal
PPM 20 Properties of Waste Palm Kernel filled Polypropylene BiocompositesA. Romisuhani and H. Salmah
PPM 21 Simulation Analysis on Ratchetting Responses of Fibre Glass Reinforced Epoxy (FGRE) Using ABAQUS K. S. Basaruddin and A. Ayob
PPM 22 Photostability of Diode Dye Doped Polyvinyl Alcohol Thin Film Upon Exposure to He‐Ne Laser N. Norwimie, M. Rahmah and H. Nurulhikmah
38
PPM 23 Effects of Epoxidised Natural Rubber (ENR) on Thermal Properties of Linear‐Low Density Polyethylene (LLDPE)/Soya Powder Composites Sam Sung Ting, Hanafi Ismail and Zulkifli Ahmad
PPM 24 The Effect of Curing Time on the Crosslink Density and Tensile Properties of Carboxylated NBR Latex Film A. S. S. Nuraya, A. Baharin, A. R. Azura and E. Hasmawati
PPM 25 Soy Bean Powder As New Filler to Produced Biodegradable Latex Film E. Hasmawati, A. Baharin, A. R. Azura and A. S. S. Nuraya
PPM 26 Effect of Hybrid Filler N220/N774 on the Mechanical Properties of Different Types Elastomers Y.S. Rohana and A. R. Azura
PPM 27 Effect of Different Curing Systems on Mechanical and Swelling on Mechanical and Swelling Properties of Carbon Black (N330) Filled Natural Rubber Vulcanizates Y.S. Rohana, A.G.P. Idayani and A. R. Azura
PPM 28 The Effects of Filler Loading and 3‐aminopropyltriethoxysilane in Epoxidised Natural Rubber‐Alumina Nanoparticles Composites (ENRAN) N. Mohamad, A. Muchtar, M. J. Ghazali, Dahlan H.M. and C.H. Azhari
PPM 29 Characterization of Pvdf‐Hfp‐Nh4CF3SO3‐SiO2 Nanocomposite Polymer Electrolytes N. Muda and N. S. Mohamed
PPM 30 Low Density Polyethylene/Thermoplastic Sago Starch‐ Kenaf fiber composite: Effects on Mechanical Properties and Morphology R. Abdul Majid, H. Ismail and R. Mat Taib
PPM 31 Additional of Polyethylene‐grafted‐Maleic Anhydride: Effects on Properties of Low Density Polyethylene/Thermoplastic Sago Starch‐ Kenaf Fiber Composite R. Abdul Majid, H. Ismail and R. Mat Taib
PPM 32 Characteristics of PVDF‐HFP/PEMA Blend Based Proton Conducting Nanocomposites Polymer Electrolytes S. Rudhziah, A. A. Rahman and N. S. Mohamed
PPM 33 Dynamic Mechanical And Thermal Properties Of BaFe12O19nanoparticles Filled TPNR Nanocomposites Mou'ad A. Tarawneh, Sahrim Ahmad, Mohamed. M.M. Milad and S.Y.Yahya
PPM 34 Silver Ion Release from Chitosan‐Ag Composite for Wound Treatment Application Nor Shahida Kader Bashah, Fatimah Suhaily Abdul Rahman, Mohd Affandi Derman, Ismail Zainol and Kartini Noorsal
PPM 35 Chemical Characterization and Application of Poly(Styrene‐Divinylbenzene) (Ps‐Dvb) and C18 Modified Ps‐Dvb Adsorbents: Solid Phase Extraction (Spe) Of Benzaldehyde, 2‐Chlorophenol, P‐Cresol And Nitrobenzene Mohd Sani Sarjadi and Mohd Marsin Sanagi
PPM 36 A Study on Zeolite Reinforced Polypropylene CompositesNadras Othman, Nur Diyana Mohd Zahari and Kamar Shah Ariffin
PPM 37 Study of Water Absorption Behaviour on Pultruded Jute Fiber Reinforced Polyester Composites using Dynamic Mechanical Analysis Adlan Akram Mohamad Mazuki, Sahnizam Safiee, Hazizan Md Akil, Azhar Abu Bakar and Zainal Arifin Mohd Ishak
PPM 38 Influence of Water Absorption on Coefficient of the Thermal Expansion(CTE) of Pultruded Jute Fiber Reinforced Polyester Composite (PJFRPC) Sahnizam Safiee, Adlan Akram Mazuki, Hazizan Md Akil, Azhar Abu Bakar and Zainal Arifin Mohd Ishak
PPM 39 Influence of Water Absorption on Mechanical Properties of Pultruded Kenaf Fibre Reinforced Polyester Composites Norlin Nosbi, Hazizan Md Akil, A. A. Bakar and Z. A. Mohd Ishak
PPM 40 Synthesis and Opto‐Electronic Properties of Silicon Incorporated Polyimide
39
Muhammad Bisyrul Hafi Othman, Zulkifli Ahmad and Hazizan Md. AkilPPM 41 Chemical Modification of Kenaf Fibers by Alkalization
Nurul Mujahidah Ahmad Khairuddin and Razaina Mat Taib PPM 42 Effect of Trans‐Polyoctylene Rubber (TOR) on Cure Characteristics and Physical Properties
of Styrene Butadiene Rubber/Recycled Acrylonitrile‐Butadiene Rubber (SBR/NBRr) Blends N. Z. Noriman, H. Ismail and A. Rashid
PPM 43 Silica Interlocked Epoxy Hollow Particles by Sol‐Gel ProcessDu Ngoc Uy Lan, A. Abu Bakar, B. Azahari, Z. M. Ariff and Yoshiki Chujo
PPM 44 Mechanical Properties and Morphology of Polyurethene/Waste Paper Foam Composites: The Effect Of Methylene Chloride H. Salmah, Z. Dahlia and O. Azlin Fazlina
PPM 45 Effect of Crystallinity And Transmission Of Dione Pigment / Palm Oil Filled LLDPE Film Upon Heat Aging A. Amir Fakhrul Islam, A. Noor Hudasuria, M. Rahmah and T. Hairaini
PPM 46 Dynamic Mechanical, Thermal And Morphological Properties Of Ethylene Propylene Diene Monomer Filled With Modified Halloyiste Nanotubes (m‐HNTs) Pooria Pasbakhsh, H.Ismail, M.N Ahmad Fauzi and A.Abu Bakar LIST OF POSTER PRESENTATION: Metallurgy (Venue: Foyer Hexagonal Level 1)
PMT 1 Effect of Time and Temperature on Intermetallic Compound Layer Growth between Lead‐free Solders and Copper Substrate I G. B. Budi Dharma, T. L. Weh, M. Hamdi and T. Ariga
PMT 2 Comparison of Neural Network Training Algorithm for Predicting Mechanical Properties of Ti‐6Al‐4V Detak Yan Pratama, Syarif Junaidi and Rizauddin Ramli
PMT 3 A comparison between Sn‐37Pb and Sn‐8Zn‐3Bi Solder Alloys in Wetting Angle and Intermetallic Compound Mohammed Noori Ridha, Ahmad Badri Ismail and Azmi Rahmat
PMT 4 SnZnAl Solder via Melting and Casting: The Characterizations and Properties Nor Azwin Ahad and Aw Yah Yun
PMT 5 Sintering Study of Titanium Alloy Foam Prepared by the Sponge Technique S. Ahmad, A. Muchtar, N. Muhamad and J. Sahari
PMT 6 Microstructure and Mechanical Behaviour of Al‐12si‐4mg Alloy by Addition of Cerium Anasyida Abu Seman, Abdul Razak Daud and Mariyam Jameelah Ghazali
PMT 7 SPR Joint for Aluminum And Magnesium AlloyKeiko Sasaki, Toshiki Karasawa, Yukio Miyashita, Naritoshi Aoyagi and Yoshiharu Mutoh
PMT 8 Fatigue Strength and Fatigue Crack Growth Behavior of Extruded AZ31 Magnesium Alloyvia RCP process Yoshiaki Shimotsuya, Kazuya Satoh, Motojiro Sugisawa, Yukio Miyashita, Katsuyoshi Kondoh and Yoshiharu Mutoh
PMT 9 Wear Behavior of TiN Coating during Stainless Steel Cutting ProcessesK Tuchinda and K Wathanyu
PMT 10 Fatigue Damage Mechanism of Pure TitaniumZahari Nur Ismarrubie, Salit Mohd Sapuan and Mikio Sugano
PMT 11 Effect of Tool Holder Angles on Cutting Force When Machining Aerospace Material K. Kadirgama, M. M. Noor, M. R. M.Rejab, K. A. Abou‐El‐Hossein, Rosli A. Bakar and H.Ismail
PMT 12 Characterisations of Cu‐based Coated Al7075 via Plasma‐spray Technique – a Preliminary Study S.E. Mat Kamal , M.J. Ghazali and S. Abdullah
PMT 13 Debinding And Sintering Of 17‐4ph Stainless Steel Powder Using Natural Rubber Based Binder Amalina Amir, Mohd. Afian Omar, Muner Md Taha, Noraini Wahab and Ahmed Jaafar
40
PMT 14 Microstructural Characterization of Carbides in 440C Martensitic Stainless Steel S. H. Salleh, M. Z. Omar, J. Syarif and S. Abdullah
PMT 15 Quantitative Failure Analysis Utilizing Simple Finite Element Approach Yunan Prawoto
PMT 16 Metal Powder Forming at Elevated Temperature‐ An Experimental Investigation to Identify the Optimum Forming Parameters M. M. Rahman, S. S. M. Nor and J. Purbolaksono
PMT 17 Hybridization of Metal Oxides‐Pani Thin Films for Ethanol Vapour Detectors Izura Izzuddin, Norhashimah Ramli, Muhamad Mat Salleh, Muhammad Yahaya and Mohammad Hafizuddin Jumali
PMT 18 Characterization of Microstructures And Properties of Sn‐Cu‐Sb Pewter Alloys W. Yew Hoong and Projjal Basu
PMT 19 Synthesis of Carbon Molecular Sieves (CMSs) From Bituminous Coal Based Activated Carbon Through Carbon Vapour Deposition Technique M.A. Ahmad, W.J. Leong and W.M.H.F. Wan Harun
PMT 20 Effects of Nickel Nanoparticle Additions on the Properties of Sn‐3.8Ag‐0.7Cu Lead‐Free Solder S. L. Tay, A. S. M. A. Haseeb and Mohd Rafie Johan
PMT 21 Visualization of Guided Wave Propagations in a Pipe with ElbowMuhammad Nor Salim, Kenji Asai, Takahiro Hayashi, Morimasa, Murase, Toshihiro Ito and Shoji Kamiya
PMT 22 Influence of Interlayer On Mechanical And Tribological Properties of DLC film Mai Takashima, Tsuyoshi Kuroda, Osamu Takai and Naoto Ohtake
PMT 23 Influence of Second Phase Particle on Fatigue Crack Growth Behavior in Ferrite Matrix Steels Mohammad Sukri Mustapa, and Yoshiharu Mutoh
PMT 24 Factor Affecting on Corrosive‐Abrasive Wear of Cast Steels,Yoshitaka Iwabuchi
PMT 25 Mechanisms of fretting wear suppression phenomena in DLC coated shim inserts Mai Takashima, Tsuyoshi Kuroda, Makoto Matsuo, Yoshinao Iwamoto and Naoto Ohtake
PMT 26 Characterization of Sn‐Ag and Sn‐Bi Lead free solder AlloyAbdul K. A.W., Nurulakmal M.S.
PMT 27 Effect of Cr And Nb Addition on High Temperature Oxidation of Ti‐48al Alloys Napisah Sapiai and Nurulakmal Mohd Sharif
PMT 28 Iron Aluminide Composites with Multi in‐situ Reinforcements Tran Duc Huy, Nurulakmal Mohd Sharif, Zuhailawati Hussain and Keiichi N. Ishihara
PMT 28 Microstructure on Interfacial Reaction of Bi‐In‐Zn/Cu and Bi‐In‐Zn/Ni Solder Joint AlloyErvina Efzan Mohd Noor, Ahmad Badri Ismail, Nurulakmal Mohd Sharif, Kuan Yew Cheong, Tadashi Ariga and Zuhailawati Hussain
PMT 29 Failure Investigation into The Flashover Of a 33kV Vacuum Circuit Breaker Farah Rawaidah Mohd Khairudin, Ir. Mohd. Noor Harun, Iszuan Shah Syed Ismail LIST OF POSTER PRESENTATION: Environment (Venue: Foyer Hexagonal Level 1)
PEV 1 Production of Carbon Molecular Sieves Membranes (CMSMS) from Phenolic Resin for Gas Permeate Study M.A. Ahmad M.A., W.M.H.F. Wan Harun, H.H. Hamidi and A.L. Ahmad
PEV 2 Porous Alumina‐Zeolite as a Hydrocarbon Trap in SI EngineShahrin Hisham Amirnordin, Hamimah Abd. Rahman, Ahmad Sobri Ahmad Hudin, Norwahdah Rahmat, Mas Fawzi Mohd Ali, Ahmad Jais Alimin, Mohd Faizal Mohideen Batcha, Wan Saiful Islam Wan Salim
PEV 3 Classification of Ultrafine Silica Powder via Air ClassifierSiti Suhaida Idrus, Samayamutthirian Palaniandy and Hanafi Ismail
PEV 4 The Effect of High Energy Milling on the Structural Changes and Microstructural
41
Characteristics of HematiteRoshaida Arbain, Munirah Othman, Samayamutthirian Palaniandy and Khairun Azizi Mohd Azizli
PEV 5 Microstructure Study of Ground Calcium Carbonate in Jet MillNoorina Hidayu Jamil, Samayamutthirian Palaniandy and Khairun Azizi Mohd Azizli
PEV 6 Synthesis, Characteristic and Catalytic Activity of LaNiO3 and LaCoO3 Catalysts Duangduen Atong, Siritha Ausadasuk and Viboon Sricharoenchaikul
PEV 7 Development of Ceramic‐Supported Ni and Co Catalysts and Its Application on Glycerol Cracking Reaction Sildara Thassanaprichayanont, Duangduen Atong and Viboon Sricharoenchaikul
PEV 8 Characterization of BET, XRF and Weight Loss on Dolomite and Calcined Dolomite Heated at Different Heating Time Mokhzani Khair Ishak, Khairul Nizar Ismail, Banjuraizah Johar, Kamarudin Hussin, Wan Mohd Sabki Wan Omar
PEV 9 The Effectiveness of Sprayed‐Mist Technique in the Continuous Production of Precipitated Calcium Carbonate (PCC) Using High Purity Limestone Roniza Ismail, Kamar Shah Ariffin, Norlia Baharun, Norashid Aziz
PEV 10 Reusability of Concrete Sludge in Sand BrickA Haqi, Z. N. Aini, W. A. Ayu, A. W. Mahyun, M.Z.M Salwa, A. R. Asr
PEV 11 Treatment of Industrial Wastewater Using Constructed WetlandN.I.A. Ahamad Nordin, Arman A., Asmida Ideris, J.H. Shariffuddin, Nasratun M., Nurul Aini M.A., Rohaida C.M., Rozaimi A.S., Ruwaida A.R., Shalyda M.S. and Sureena A.
PEV 12 Application in Fixed Bed Systems of Adsorbents Obtained from Chitosan and Oil Palm AshMasitah Hasan, Bassim H. Hameed and Abd. Latif Ahmad
PEV 13 Study on Mineral Liberation of Local Low Grade Manganese Ore S. Ismail, H. Hussin, Z. Zainol and S. F. S. Hashim
PEV 14 Froth Flotation of Two Different Types of Malaysian Mica Ismail Ibrahim, Khairun Azizi Mohd Azizli and Hashim Hussin
PEV 15 Study on the performance of Subsurface Flow and Free Water Surface Constructed Wetland for Landfill Leachate Treatment K. Ain Nihla, S. Johan and A.J. Mohd Faizal
PEV 16 Factors Affecting Landfill Gas Emission to the Atmosphere: A ReviewMohammed F. M. Abushammala, Noor Ezlin Ahmad Basri and Abdul Amir H. Kadhum
PEV 17 Synthesis of Olivine and Olivine‐Supported Nickel Catalyst for Syn‐gas Production Duangduen Atong, Chiravoot Pechyen, Duangdao Aht‐Ong and Viboon Sricharoenchaikul
PEV 18 Identification and Extraction of Recyclable Beverage Cans by Automated Image AnalysisIrsyadi Yani, Hassan Basri, Noor Ezlin, M. A. Hannan and E. Scavino
PEV 19 Study on the Effect of Alkaline Activators Ratio in Preparation of Fly Ash ‐ Based Geopolymer Omar. A. K. A. Abdul Kareem, San Myint and Mohd Mustafa Al‐ Bakari Abdullah
PEV 20 The Contribution of Resonance Frequencies Toward Sound Absorption Performance of Wood Circular Perforated Panels Mohamad Ngasri Dimon, Mokhtar Harun, Abdul Wahab Ishari Hashim, Siti Zaleha Abdul Hamid Mun Hou Kit and Siti Dhalia Adzim Muhamod Adzim
PEV 21 PCA Approach for Air Quality Estimation: Development and Evaluation of the QDDM Air Quality Assessment System Izhar Abadi Ibrahim Rais, Syed Fuad Saiyid Hashim and Eric Goh
