4713 E EEM 4.1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W

8/10/2019 4713 E EEM 4.1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W

1/20

Content

1Content .......................................................................................................................................2Power Electronics / Electrical Machines / Drive Technology ......................................................

2EEM Electrical machines 300W .................................................................................................3EEM 4-3 Asynchronous machines 300W ...................................................................................3EEM 4.1-3 Three-phase induction motor with squirrel cage and distinct pull-out torque 300W

Lucas-Nlle GmbH Page 1/20 www.lucas-nuelle.com


2/20

Power Electronics / Electrical Machines / DriveTechnology

Equipment and systems for vocational qualifications and engineering education on the following topics:

Electrical machines, power electronics, drive technology

Complete machine labs, electrical machine labs and drive technology

EEM Electrical machines 300W

EEM Electrical machines 300W

Electrical machines convert electrical energy into mechanical energy or vice versa. A fundamental distinctioncan be drawn between DC, AC and three-phase machines.

The machines used for training in electrical engineering are designed so that nearly all of the circuitry and drivesfound in industry, commerce and at home can be conveyed in a didactic fashion in hands-on training. Using theservo drive and braking system it is possible to easily determine all of the relevant data for electrical machines.



3/20

EEM 4-3 Asynchronous machines 300W

EEM 4-3 Asynchronous machines 300W

Asynchronous machines can be found with power levels ranging up into the MW range. Due to their simpledesign asynchronous squirrel-cage machines are particularly widespread.

The training objectives are:

Motor connection

Reversing rotation direction

Manual switching

Machine-specific values and characteristics

Measurement evaluation



4/20

EEM 4.1-3 Three-phase induction motor with squirrelcage and distinct pull-out torque 300W

EEM 4.1-3 Three-phase induction motor with squirrel cage and distinct pull-out torque300W

Additional training objectives:

Star-delta connection

Steinmetz circuit

Reactance power compensation with capacitors of various capacitance



5/20

Pos. Product name Bestell-Nr. Anz.

1 Three-phase asynchronous motor, squirrel-cage, 0.3kW SE2672-3G 1

Three-phase asynchronous motor with pronounced pull-out torque.

Nominal voltage: 690/400V, 50 Hz

Nominal current: 0.6A/1A

Nominal speed: 2800rpm

Nominal power: 0.37kW

Power factor (cos phi): 0.83

Dimensions: 340 x 210 x 210mm (WxHxD)

Weight: 9kg

2 Star-Delta switch CO3212-2D 1

Switch positions : O - star - delta (rotary switch)

Contact rating: 690V, 12A, max.

Inputs/outputs: 4mm safety sockets

Dimensions: 297 x 114 x125mm (HxWxD)

Weight: 0.8kg

Equipment set, consisting of:

Equipment set, consisting of:



6/20

3 Cut-out switch, 4 pole CO3212-1W 1

Switch position: 0 - 1 (rotary switch)

Contact rating: 660V, 12A max.

Inputs/outputs: 4mm safety sockets

Dimensions: 297 x 114 x 125mm (HxWxD)

Weight: 0.8kg

4 Capacitive load, three-phase, 14-stage, CO3212-6X 1

The capacitive load is for step-by-step loading or compensation ofreactive power in conjunction with asynchronous 3-phase machinery.

Capacitors: 3x 1F / 2F / 4F / 8F

Electrical strength 450V

Dimensions: 297 x 228 x 140mm (HxBxT)

Weight: 2.0kg



7/20


5 Interactive Lab Assistant: Asynchronous machines 0.3/1kW SO2800-1C 1

Multimedia experiment software with virtual instruments, instructions

and documentation of results on squirrel-cage rotor machines,

polarity-switching Dahlander three-phase motors and three-phase

motors featuring two separate windings with power ratings of 0.3

and 1 kW.

Interactive experiment s et-ups

Measurements and graphics can be copied to the experiment

pages by means of drag and drop

Measurement and testing software can be started directlyfrom the experiment instruction pages

Questions with feedback and evaluation logic for testing

knowledge

Document print-out for simple printing of experimentinstructions with solutions

CD-ROM with Labsoft browser, course software and s oftwarefor braking systems and measuring equipment

Media:



8/20

Additionally required - Machine test bench equipment set for servo-drive/braking system:



9/20


6 Servo machine test stand for 0.3kW machines incl. softwareActiveServo (D,GB,F,E)

CO3636-6V 1

The servo-machine test bench is a complete testing system forexamining electrical machines and drives. It consists of a digitalcontroller, a brake and the AktiveServo software. The systemcombines state-of-the-art technology with ease of operation.The system also allows manual and automated synchronisation tobe carried out.

The controller has the following features:

Dynamic and s tatic four-quadrant operation

10 selectable operating modes/machine models (torquecontrol, speed control, flywheel, li fting drive, roller/calander,fan, compressor, winding gear, arbitrarily defined time-

dependent load, manual and automated networksynchronisation)

Integrated galvanically isolated am plifier for voltage andcurrent measurement

Speed and torque displays

Four-quadrant monitor

USB interface

Thermal monitoring of the machine under test

Testing for the presence of a shaft cover.

Connection voltage: 400V, 45...65Hz

Maximum power output: 4kVA


Weight: 13.3kg

The brake is self-cooled asynchronous s ervo-brake with resolver.

The motor and sensor leads are connected via polarity-safe plugs.The machine has thermal monitoring and, in conjunction with thecontroller, it constitutes a driving and braking system that is free ofdrift and requires no calibration.

Maximum speed: 4000rpm

Maximum torque 10Nm

Temperature monitoring: continuous temperature sensor(KTY)

Resolver resolution: 65536 pulses/revolution

Dimensions: 275 x 210 x 210mm (WxHxD)

Weight: 6kg

ActiveServo is a program for recording characteris tics of machinesand for determining dynamic and static operating points. It emulates



10/20

seven different loads (flywheel, pum p, calander, lifting drive,compress or, winding gear, arbitrarily configurable time-dependentload) for which the parameters can be individually configured.

Features:

Measurement, calculation and display of mechanical and

electrical variables

(Speed, torque, mechanical power output, current, voltage,active, apparent and reactive power, efficiency, power factor)

Simultaneous display of measured and calculated values(e.g. instant display of efficiency)

Measurement of voltage and current (including RMS valueseven for non-sinusoidal waveforms)

Speed or torque-controlled operation

Recording of variables over time

Programming of limiting values of speed or torque to preventinappropriate loading of the machine under test.

Operation in all four quadrants (display of generated torque)

Arbitrarily defined ramp functions for PC-control led loadexperiments

Display of characteristics from several experiments to betterillus trate the effect of parameter changes

Export of graphics and measurements

32-bit version for Windows

7 Rubber coupling sleeve, 0.3kW SE2662-2A 1

Rubber coupling sleeve used for the coupling of two machines

Permits rapid and safe assembly

Designed with internal ring gear

Material: rubber (neoprene)

Dimensions: 40 x 45mm (length x diameter)

Weight: 0.1kg



11/20

8 Coupling guard, 0.1/0.3kW, transparent SE2662-7B 1

Plug-in plas tic panel to prevent people touching the revolvingcoupling between two machines

Material: clear makrolon with plug


Weight: 0.1kg

9 QuickChart, Servo-machine test stand safety and operatinginstructions (GB)

SO6200-7D 1

Short documentation covering the putting into operation of complexequipment and experiment set-ups.

Terminal assignment, safety instructions, help

Circuit and ass embly diagrams

Color print in DIN A3 format

Laminated: 2 x 250 m



12/20


10 Universal power supply for DC and Three-Phase Current CO3212-5U 1

Mains power supply for DC, AC and three-phase current and forexcitation of synchronous machines. The mains supply isspecially designed for use with electrical machines.

Outputs:Three phase: L1, L2, L3, N from 4 mm safety socketsDC: 0...240VDC variable, controlled and electronicallyprotected against overload and short circuits.Output current: 3...10A (adjustable current limiting)

Second DC supply ca. 210VDC, 6A fixed

Protective systems:Motor protection switch adjustable from 6.3...16AUndervoltage tripSafety cut-out

Mains connection: 3x 230/400V, 50/60Hz via CEE plugwith 1.8m mains lead


Weight: 3kg

Power supply:



13/20

Measuring instruments:



14/20


11 Analog/digital multimeter, wattmeter + power-factor meter incl.Software

CO5127-1Z 1

The areas of electrical machines, power electronics and drivetechnology pose particular problems for measuring instruments. Inaddition to high-performance overload protection, the acquis ition ofmeasurement values must be performed accurately independently ofthe curve's shape. The universal measuring device has beendes igned particularly to satisfy these requirements. It cansimultaneously replace as many as four different measuringinstruments constituting a current/voltmeter, power and phas e-angle meter all in one. The graphic display allows for both student aswell demonstration experiments. The VI Starter software includedallows for visualisation of measurements on a PC.

Simultaneous, meas urement of voltage and currentindependent of the curve s hape (max. 600 V, 20 A)(measurement of clocked voltages)

Calculation of active, apparent and reactive power as well asthe power factor

Measurement of the total rms (RMS-AC+DC) ; AC rms (RMS-AC) and arithmetic mean (AV-AC+DC)

Impervious to electrical damage up to 20 A/600 V

Large-scale, high-contrast background-illuminated graphicdisplay (5,7")

Large-scale display or display of up to 4 meas urementvalues

Digital or pseudo-analog display

USB interface

Internal resis tance: current path 10mOhm, voltage path10MOhm

Voltage ranges: 30;300; 600V

Current ranges: 1; 10; 20A

Measurement accuracy: 2%

Automatic or manual measurement range selection

Demonstration test instrument for mains operation

Operating voltage: 230V, 50/60Hz


Weight: 2kg

The VI Starter software allows al l the meas urements to be displayed

on the PC. Up to 17 different displays can be opened.

Oscilloscope display of voltage, current and power

Consumption meter to display power consumed and output



15/20

Data logger for 14 different variables

Data export for data logger

Characteristic recorder

Labview driver and supplied examples

32-bit version for Windows


12 Set of safety measurement cables, 4mm (23 leads) SO5148-1L 1

Safety measurement cables with 4mm s afety plugs , coloured, PVCinsulation, highly flexible

Each set includes the following:

4 x 25cm long, black4 x 50cm long, black2 x 100cm long, blue2 x 100cm long, red1 x 100cm long, green/yellow1 x 150cm long, blue

1 x 150cm long, green/yellow2 x 150cm long, green2 x 150cm long, brown2 x 150cm long, black2 x 150cm long, grey

Wire cross section 2.5 mm

Capacity/category: 600V CAT II, 32A

13 Safety connection plug 19mm/4mm, black SO5126-9Y 15

Max. sustained current: 24A

Contacts: 4mm laminated plugs

Contact-protected

Insulation class CAT II/600V

Accessories:



16/20

14 Safety connection plug 19mm/4mm, black, with tapping SO5126-9R 5



Contact-protected

Insulation class CAT II / 600V

15 Safety connection plug 19mm/4mm, blue SO5126-9V 2



Contact-protected

Insulation class CAT II / 600V

16 Safety connection plug 19mm/4mm, green/yellow SO5126-9W 2



Contact-protected

Insulation class CAT II/600V



17/20

17 Mobile aluminium experiment stand, 3 levels, 6x earthed sockets,1250x700x1955mm

ST7200-3A 1

High-quality, mobile experiments s tand from the SybaPro range fordemons trations and experiments. Features alum inium profile legs

compatible with all add-ons and extensions for the SybaPro system.The mobile experiment stand is supplied in kit form and needs to beass embled by customers thems elves.

Table top:

30-mm table top made of highly compressed, multi-layer finechipboard conforming to DIN EN 438-1

Colour grey, RAL 7035, with 0.8-mm slightly textured laminatecoating (Resopal) on both sides, conforming to DIN 16926

Resis tant to many chemicals and reagents including diluteacids and alkalis

Resistant to heat, e.g. molten solder or heating at specificpoints such as by soldering tips or cigarette ends

Table top with solid impact-resistant protective edging madeof 3mm thick RAL 7047 coloured plastic

Coating and adhes ive are PVC free

Power supply with 6-outlet socket strip mounted underneaththe table top, 2-m lead and earthed plugs

Frame:

2 extruded aluminium profiles with multiple grooves 1800 x

120 x 40 mm (WxHxD)

8 equally sized grooves in extruded aluminium profiles (3 oneach side and 1 each on the front and back)

Grooves accommodate s tandard indus trial m ountings

4 H-shaped aluminium profiles, 1150 mm, for 3-layerorganisation of DIN A4 panels

Space for extension of power supply duct

Base made of rectangular tubing with 4 swivelling doublecasters , 2 of which have brakes

Table frame m ade of tough combination of rectangular tubingaround the full perimeter

Acid-res istant epoxy-res in coating, 80 m thick (approx.),colour RAL 7047

Dimensions:

Height of table top 760 mm

1250 x 1955 x 700 mm (WxHxD)



18/20

18 Power supply for mobile working stations ST8008-8M 1

400-V CEE distribution panel with automatic circuit breakers forattachment to profiles on experiment trolleys or direct to table-top.

2 CEE sockets (400 V, 16 A, 5-pole) with safety flap1 Mains s ocket with earth (230 V) plus safety flapCircuit breaker: 1 x 3-pole line circuit breaker, type B, 16 AMains connection: 3 x 230/400 V, 50/60 Hz via CEE plug, 4-mmains leadDimensions: 530 x 130 x 110 mm (HxWxD)Weight: 3 kg

19 Wall or aluminium-profile mounting cable storage for 48 cables ST8003-8E 1

Accommodates about 48 safety measuring leads Suitable formounting on walls or aluminium profiles

20 PC holder for Syba experiment trolleys, height and widthadjustable

ST7200-5A 1

Shelf for desktop PC made of 1.5mm sheet steel punched withholes , suitable for all furniture in the SybaPro aluminium profilerange

Adjus table assembly height

Adjus table width (160 - 255mm)

Can be mounted to left or right

Includes all equipment necessary for assembly (4 bolts and 4tenon blocks)

Acid-res istant epoxy-res in powder coating, 80m thickapprox., colour RAL7047



19/20

21 Monitor holder for flat screen monitor of weight up to 10kg, VESA75/100

ST8010-4L 1

Pivoting monitor holder for attachment to aluminium profiles offurniture in the SybaPro range. Allows a monitor to be placed inthe optimum position so that work and experiments are lesstiring.

Pivoting arm with two-part joint

Quick-lock for adjustment to any height on extrudedaluminium profile

VESA fastening 7.5 x 7.5cm

Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter

2 Cable clips

Adequate carrying capacity 10kg

TFT monitor can be turned parallel to the table edge

Separation can be adjusted to anywhere between 105 and480mm

Additionally included:

Cable management set for installing cables along the profiles of thealuminium lab system furniture in the SybaPro range

The set consis ts of the following:

3 Cross cable binders for front and rear grooves ofaluminium profile3 Cross cable binders for side grooves of aluminium profile12 Cable binders4 Aluminium cover profiles for covering and enabling wires tobe run along the grooves of an aluminium profile



20/20

22 Protection cover for three-level experiment trolleys ST8010-9Y 1

Dust cover for three-level experiment trolleys

For protecting equipment from dust and damp

For keeping equipment out of sight

Colour: matt dark grey with printed LN logo in orange)

Material: nylon fabric with polyurethane coating

High resistant to tearing, impregnated to be washable andwaterproof

Documents

4713 E EEM 4.1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W