· PDF fileshaperlighting.com 3 Hospitality Design & Lifestyle Inc. San Francisco, CA Photography: Paul Dyer Architect: Feldman Architecture, Inc. Fixture: 101-48-P

��

2 shaperlighting.com

Executive Office - LobbyHermosa Beach, CAPhotography: R. KashFixtures: M105-DMS-SIW


shaperlighting.com 3

Hospitality Design & Lifestyle Inc.San Francisco, CAPhotography: Paul DyerArchitect: Feldman Architecture, Inc.Fixture: 101-48-P-2S-T5/2/28-NA-NLB


104-W-CNK-VXT104-W-CCS-RNT 105-1S-SQS-VDE 105-1S-CNS

101-38-S-NLB

102-24-S-SBG

102-24-P-CCS

102-30-S-APX

102-30-P-VDB

102-36-S-SEG

102-36-P-GFX

104-W-SEG-SRT104-W-GFX-CBP

105-1S-DMS 105-1S-CYS

103-W-APX

101-38-P-SIS-EDT 101-48-P-SIS-SMO

101-48-S-CCT

102-42-S-ABB

102-42-P-CXH

Surface Rectilinear

Pendant Rectilinear

Pendant Drums

Wall - Square Wall - Rectilinear

Mini-Pendant

SurfaceDrums

��

��

��

��

��

100 Series Fabriqué

Round Cylinder

Tapered Cylinder

Wall - Square Cylinder

Cube

Square Cylinder

106-28-P-SIW

110-25-W-BZS110-37-W-AMS

110-37-W-NGS 111-25-W-WCA 111-37-W-AMS 111-49-W-CNK

108-52-S-SEG

110-37-W-MMRDL

106-40-P-NLB 106-52-P-SDE

109-30-P-CC-EMP

111-49-W-MMSQM

109-18-WMTA-GFX

109-24-S-AMS

111-49-W-WSQSIS

108-52-P-HTG

110-37-W-WRDSIS

106-40-P-TRDSIS 106-S-MMRDL

107-28-P-HTG

107-40-P-GFX

107-52-P-SDE

107-40-P-TSQSIS

107-28-P-MMSQM

��

��

��

��

Wall - Round Cylinder



What separates from the competition?

One of the many distinguishing features of Shaper’s new Fabriqué line is our “commercially based” design premise. Standard shade fixtures typically offer only minimal lamp types, are difficult or expensive to modify and are limited to 32” size or smaller.

Fabriqué’s design platform is based on a modular approach:-Easily modified; size, lamping, fabric, suspension options, etc.-Offers the latest in lamp & ballast technology; T5/CFL with dimming ballasts (DM) -Features Integral Emergency Battery Back-Up (IEM)

The design allows the electrical contractor to install the suspen-sion/electrical components early in the construction phase while the fabric shade is stored (to ensure it will not be damaged or get dirty). After the final phase of construction is complete, the shade can easily be added to the preinstalled hanging components.

Unparalleled AestheticsFabriqué Series feature a premium manufacturing process referred to in the shade industry as “hand-tucked edge.” This is a high-quality, hand-applied fabric “wrap,” that provides an unparalleled architectural grade aesthetic. We have designed all of the shades to have minimal or no visible hardware or structural trim. The standard fabrics were carefully selected to meet the design industry’s “hot colors,” and six are specialty fabrics from the San Francisco Mart. We can also easily accommodate “customer supplied” fabric. Refer to the specification pages for details.

Modular Design with Commercial Technology

Poor-quality construction and steel does not have a powder coat finish.

Poor-quality machined trim with bulky overlap and poor-quality glue process.

"Competition"

"Hand-Tucked Edge"

“Attention to detail”

101 102

106

104


"FSC Bamboo"

Visit shaperlighting.comFOR COMPLETE PHOTOMETRICS

Wide Variety of ChoicesFabriqué features a wide variety of specification options:• 14 distinct shapes • 22 diverse scales• 15+ standard finish options • 29 material options• Bottom covers standard with optional top covers• Three unique, modular, decorative trim options - 104 Series• Multiple suspension options• Customer-supplied fabric option • Modification of standards – All Series

Unique FeaturesFabriqué offers custom-designed Shade-in-a-Shade options with the 101, 106, 107, 110 and 111 Series. This option is hand-constructed with minimal hardware out of high-quality materials and features three beautiful organza fabrics. The 105 “Mini” Series can be specified with SJ cord, standard canopy or 3 different Halo Track systems (8 track types). In addition, the 101, 102, 106, 107, 108 and 109 Series are available in large scales to meet the requirements of voluminous architectural applications.



"Track Mount"

"Shade-in-a-Shade""New Fabrics"

"Metal Motifs - Pendant"

"Metal Motifs - Wall"

"Cluster - Pendant"

"Wall Mount"

New Pleats"Metal Panels - Pendant"

"European Mushroom Pleat"

"Casual Box Pleat"


101 SERIESInterior Surface & Pendant LuminairesRectilinear

Description

The 101-P ��Rectilinear Pendant and 101-S Surface Luminaires features 29 standard materials, multiple mounting options and a Shade-in-a-Shade option.

Material/Mounting Cold-rolled steel and aluminum wire body, painted white. Matte white acrylic bottom diffuser with two finials, standard. Optional matte white top cover. Shades: Solid cold-rolled steel construction. Fabric on heavy translucent white styrene. Optional Shade-in-a-Shade (SIS): Solid cold-rolled steel construction with exposed metal painted white, silver or gold to match specified fabric. Fabric adhered to heavy clear vinyl backing. Refer to pages 78/79 for detailed material descriptions.

101-S (Surface): Cold-rolled steel frame and mounting plate. 101-P (Pendant): Double Stem (2S): 13” x 5” rectilinear canopy plate. Two 1/2” stems with a standard hang height of 24” (OA), minimum 18” (OA). Maximum overall hang height for one-piece stem assembly is 5’ (OA). 5’ to 25’ (OA) is supplied with a Collector Body (CB). Contact factory for lengths above 25’. Specify SCA for sloped ceilings up to 45°, for horizontal mounting (only) to ceiling plane. Contact factory for SCA, vertical applications. Aircraft Cable with White SJ Cord (SJWAC): 3/64” cables with a standard hang height of 24” (OA), minimum 20” (OA). Maximum overall hang height is 25’ (OA). Contact factory for lengths above 25’. Optional Clear SJ Cord (SJCAC). Note: 5-wire SJ cord supplied for non-DM and 7-wire supplied for DM.

Finish (Stem, canopy and finials)Standard: Natural Aluminum (NA) . Premium: Matte White (MW), Lacquered Satin Aluminum (SAL), Satin Brass (SB), Polished Brass (PB), Oxidized Brass (OBRS), Satin Chrome (SC), Polished Chrome (PC), Satin Copper (SCP), Polished Copper (PCP), Oxidized Copper (OCP), Satin Nickel (SN), Polished Nickel (PN), Gun Metal (GNM) or Custom Color (CC).Note: Mounting hardware for surface mount luminaire is prepainted white. Contact factory for multi-finishes i.e. MW finial with SC stems/canopy.

Shade MaterialStandard: Shantung White (SWH). Premium: Shantung Eggshell (SEG), Chintz Chocolate (CCT), Chintz Onyx (CXH), Shantung Beige (SBG), Glasgow Flax (GFX), Cinnamon Stick (CNK), Apex (APX), Criss-Cross (CCS), Grass Cloth (GSH), Paper Leaf (PPF), Nutmeg Shimmer (NGS), Bronze Shimmer (BZS), Linen Alabaster (LAT), Linen Biscuit (LBS), Silk Ivory (SIY), Silk White (SIW), Linen Chopsticks (LCK), White Krinkle (WHK), Sandstone (SDE), White Corona (WCA), Heather Grey (HTG), Aluminium Shimmer (AMS), Golden Honey - Vinyl Coated (GHY), Natural Flax - Vinyl Coated (NFX), Alabaster - Vinyl Coated (ABR), Natural Bamboo (NLB) , Variegated Bamboo (VDB) or Amber Bamboo (ABB) or Customer Supplied Fabric (CSCC). Refer to pages 78/79 for detailed descriptions. All shades are hand-tucked (trimless) except for wood and paper options.

Many additional stock fabrics are available as a MOD; contact the factory for details. Shaper can accommodate “Customer Supplied Fabric” (CSCC) orders. Please contact your representative for details and minimum quantities. Optional Shade-in-a-Shade (SIS): Earth Dust (EDT), White Mist (WMT) or Silver Moon (SMO) (101-P only).

OpticsRefer to shaperlighting.com for complete photometrics.

BallastIntegral electronic HPF, 120/277V (347V Canada), thermally protected with end-of-life circuitry to accommodate the specified lamp wattage 120/277V IEM & DM only. Contact factory for 347V DM. Standard dimming ballasts: Advance-HO Mark 7 (DMA7) or 10 (DMA10) or Lutron (DML).

Lamp/Socket38”: Two (2) 21W or 39W HO T5 linear fluorescent lamps or three (3) 60W T-10

frosted lamps.48”: Two (2) 28W or 54W HO T5 linear fluorescent lamps or four (4) 60W T-10

frosted lamps.Note: When specifying the Advance dimming option, only Advance Mark 7 or 10 are available. Specify (2) 54WHO T5 (101-48"-P) lamping. T5HO lamps are recommended for use with medium to dark materials. Lamps furnished by others.

Installation101-S: Supplied with a universal linear strap for standard 4” J-box or plaster ring. 101-P: Supplied with a universal integral mounting strap for a standard 4” J-box or plaster ring. Integral safety cable provided. Contractor to provide appropriate structural support for fixture weight. Refer to shaperlighting.com for installation instructions and additional drawings.

OptionsFL T5 Dimming Ballast: Advance Mark 10 (DMA10), Advance Mark 7 (DMA7)- Available with (2) 54WHO T5 (101-48"-P) only or Lutron (DML). Sloped Ceiling Adaptor - 101-P & Horizontal Mount only (SCA), Matte White Acrylic Top Cover - 101-P only (TC), Integral Emergency Battery (IEM), Casual “Box” Pleat (CBP), European “Mushroom” Pleat (EMP), Shade-in-a-Shade-101-P only, (SIS) + EDT, WMT or SMO. Contact factory for NFP701 Fire Resistant or Stain Guard fabric coatings.

LabelsU.L. and C.U.L. approved. Interior applications only.

ModificationsShaper’s skilled craftspeople with their depth of experience offer the designer the flexibility to modify standard Fabriqué pendant and surface luminaires for project-specific solutions. Contact the factory regarding scale options, unique finishes, mounting, additional materials/colors or decorative detailing.

SPECIFICATION FEATURES

SERIES LENGTH MOUNTING LAMP VOLTAGE FINISH SHADE MATERIAL OPTIONS OA101 38”

48” S P-2SP-SJWAC P-SJCAC

T5/2/21 (38”)T5/2/39HO (38”)T5/2/28 (48”)T5/2/54HO (48”)INC/3/60 (38”)INC/4/60 (48”)

120V277V (FL only)347V (FL only)

NA, MW, SAL, SB, PB, OBRS, SC, PC, SCP, PCP, OCP, SN, PN, GNM or CC

SWH, SEG, CCT, CXH, SBG, GFX, CNK, APX, CCS, GSH, PPF, NGS, BZS, LAT, LBS, SIY, SIW, LCK, WHK, SDE, NLB, VDB, ABB, WCA, HTG, AMS, GHY, NFX, ARB or CSCC

DMA7, DMA10, DML, IEM, SCA, SIS + EDT, WMT or SMO, CBP, EMP or TC

(Pendant only) 24” or specify

ORDERING EXAMPLE 101-38-P-2S-T5/2/21-120V-NA-SBG-SIS-SMO-IEM-30

Pleats & Materials

101 Mounting

��

� ��

��

��

��

��

��

��

� ��

��

��

��

��

��

��

��

��

��

101-48-P-2S-T5/2/54HO-120V-SAL-NLB-28



101-38-P-2S-T5/2/21-SAL-WCA-24

101-38-P-2S-T5/2/39HO-120V-NA-AMS-CBP-DML-26

101-48-P-2S-T5/2/28-120V-OBRS-APX-SIS-EDT-29



101-48-P-2S-T5/2/54HO-120V-OBRS-CCS-DML-28

101-48-S-T5/2/28-277V-NA-SWH

Hotel BruggeBritish Columbia, Canada Photography: Douglas SalinFixture: 101-P-48-APX-SIS-EDT


12 shaperlighting.com12 shaperlighting.com

Private Residence San Francisco, CA Architect: Feldman Architecture, Inc.Photography: Paul Dyer Fixture: 101-38-P-2S-T5/2/21-120V-SC-SWH-SIS-WMT-44


101-38-S-T5/2/21-120V-MW-CNK

101-38-P-2S-T5/2/21-277V-SC-SBG-IEM-32101-38-P-SJWAC-T5/2/21-120V-NA-CXH-SIS-SMO-30



DescriptionThe 102-P ��Drum Pendant and 102-S Surface Luminaires features 29 standard fabrics and multiple mounting options.

Material/MountingCold-rolled steel and aluminum wire body, painted white. Matte white acrylic bottom diffuser with one finial, standard. Optional matte white acrylic top cover.Shades: Solid cold-rolled steel construction. Fabric on heavy translucent white styrene. Refer to pages 78/79 for detailed descriptions.

102-S (Surface): Cold-rolled steel surface mount canopy, painted white. 102-P (Pendant): Single Stem (1S): 5” canopy with a 1/2” stem self-aligning swivel. One 1/2” stem with a standard hang height of 24” (OA), minimum 18” (OA). Maximum overall hang height for one-piece stem assembly is 8’ (OA). 9’ to 25’ (OA) stems are supplied in multiple sections. Supplied with a hang straight swivel canopy that will accommodate up to 34° (total) adjustment. Specify SCA for sloped ceiling applications from 18° to 45°. Single Stem Aircraft Cables (1SAC): One 1/2” stem and 3-3/64” cables with a standard hang height of 24” (OA), minimum 18” (OA). Maximum overall hang height is 25’ (OA). 8’ to 25’ stems are supplied in multiple sections. Contact factory for lengths above 25’. 102-WMTA (Wall Mount Arm): Solid aluminum or steel wall mount arm with stainless steel aircraft cable. Available only in 24", 30" & 36".

Finish (Stem, canopy and finial)Standard: Natural Aluminum (NA). Premium: Matte White (MW), Lacquered Satin Aluminum (SAL), Satin Brass (SB), Polished Brass (PB), Oxidized Brass (OBRS), Satin Chrome (SC), Polished Chrome (PC), Satin Copper (SCP), Polished Copper (PCP), Oxidized Copper (OCP), Satin Nickel (SN), Polished Nickel (PN), Gun Metal (GNM) or Custom Color (CC).Note: Mounting hardware for surface mount luminaire is prepainted white. Contact factory for multi-finishes i.e. MW finial with SC stem/canopy.

Shade MaterialStandard: Shantung White (SWH). Premium: Shantung Eggshell (SEG), Chintz Chocolate (CCT), Chintz Onyx (CXH), Shantung Beige (SBG), Cinnamon Stick (CNK), Apex (APX), Criss-Cross (CCS), Glasgow Flax (GFX) , Grass Cloth (GSH), Paper Leaf (PPF), Nutmeg Shimmer (NGS), Bronze Shimmer (BZS), Linen Alabaster (LAT), Linen Biscuit (LBS), Silk Ivory (SIY), Silk White (SIW), Linen Chopsticks (LCK), White Krinkle (WHK), Sandstone (SDE), White Corona (WCA), Heather Grey (HTG), Aluminium Shimmer (AMS), Golden Honey - Vinyl Coated (GHY), Natural Flax - Vinyl Coated (NFX), Alabaster - Vinyl Coated (ABR), Natural Bamboo (NLB) , Variegated Bamboo (VDB) or Amber Bamboo (ABB) or Customer Supplied Fabric (CSCC).Refer to pages 78/79 for detailed descriptions. All shades are hand-tucked except for wood and paper options. Many additional stock fabrics are available as a MOD, contact the factory for details. Shaper can accommodate “Customer Supplied Fabric” (CSCC) orders. Please contact your representative for details and minimum quantities.


BallastIntegral electronic HPF, multi-volt 120/277V (347V Canada), thermally protected with end-of-life circuitry to accommodate the specified lamp wattage. Contact factory for 347V IEM. Standard dimming ballasts: Advance Mark 7 (DMA7) or 10 (DMA10) or Lutron (DML).

Lamp/Socket24”: Three (3) 26 or 32 (GX24q-3) triple CFL lamps or three (3) 60W A-19 lamps. 30”: Three (3) 26 or 32 (GX24q-3) or 42W (GX24q-4) triple CFL lamps or three (3)

60W A-19 lamps.36”: Four (4) 32 (GX24q-3) or 42W (GX24q-4) triple CFL lamps or four (4) 60W

A-19 lamps.42”: Four (4) 32 (GX24q-3) or 42W (GX24q-4) triple CFL lamps or four (4) 60W

A-19 lamps.CFL socket injection-molded plastic. INC socket fired ceramic rated for 660W-250V. Lamps furnished by others.

Installation102-P: Supplied with either a circle strap mounting canopy or bar strap that mounts to a 4” J-box or plaster ring. Integral safety cable provided.102-S: Supplied with a universal circular strap for a standard 4” J-box or plaster ring. 102-WMTA: Arm supplied with a universal circle strap pattern for 3 1/2" & 4" J-boxes and switch boxes. The arm attaches to a standard 1/2" stem via a coupler. J-box to be framed and/or supported by building structure. Integral safety cable provided. Available only in 24", 30" & 36".Contractor to provide appropriate structural support for fixture weight. Refer to shaperlighting.com for installation instructions and additional drawings.

OptionsCFL Dimming Ballast - Advance (DMA7) or (DMA10) or Lutron (DML) - Matte White Acrylic Top Cover - 102-P only (TC), Casual “Box” Pleat (CBP), European “Mushroom” Pleat (EMP), Sloped Ceiling Adaptor - 102-P only (SCA), Integral Emergency Battery (IEM). Contact factory for NFP701 Fire Resistant or Stain Guard fabric coating. Contact factory for Shade-in-a-Shade and Multi-Shade options.


ModificationsShaper’s skilled craftspeople with their depth of experience offer the designer the flexibility to modify standard Fabriqu� pendant and surface luminaires for project-specific solutions. Contact the factory regarding scale options, unique finishes, mounting, additional materials/colors, or decorative detailing.


SERIES DIAMETER MOUNTING LAMP VOLTAGE FINISH SHADE MATERIAL OPTIONS OA102 24”

30”36”42”

SP-1SP-1SACWMTA

CFL/3/26 (24” & 30”)CFL/3/32 (24” & 30”)CFL/3/42 (30”)CFL/4/32 (36” & 42”)CFL/4/42 (36” & 42”)INC/3/60 (24” & 30”)INC/4/60 (36” & 42”)

120V277V (CFL only)347V (CFL only)

NA, MW, SAL, SB, PB, OBRS, SC, PC, SCP, PCP, OCP, SN, PN, GNM or CC

SWH, SEG, CCT, CXH, SBG, GFX, CNK, APX, CCS, GSH, PPF, NGS, BZS, LAT, LBS, SIY, SIW, LCK, WHK, SDE, WCA, HTG, AMS, GHY, NFX, ABR, NLB, VDB, ABB or CSCC

DMA7, DMA10, DML, CBP, EMP, IEM, SCA or TC

(Pendant only)24” Dia. = 24” OA30” Dia. = 28” OA36” Dia. = 34” OA42” Dia. = 40” OAor specify

102 SERIESInterior Pendant and Surface LuminairesDrum

Pleats & Materials

ORDERING EXAMPLE 102-24-P-1S-CFL/3/26-120V-NA-SBG-24


��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

102 Mounting

Norwich Bed & BreakfastWaterbury, CTPhotography: Douglas SalinFixture: 102-30-P-1S-APX


102-42-P-CFL/4/32-120V-SAL-CXH-36

Oakland Sports ComplexOakland, CA

Photography: Douglas SalinFixture: 102-30-P-1S-SC-CCS-TC


102-30-P-1S-CFL/3/32-12OV-SCP-CNK-34

102-30-P-1S-CFL/3/32-277V-SAL-ABB-28

102-30-WMTA-CFL/3/42-120V-SAL-VDB

102-42-S-CFL/4/42-120V-SAL-SWH




102-36-P-1S-CFL/4/32-12OV-SN-SBG-30

102-36-P-1SAC-CFL/4/32-120V-SC-GFX-42


Men's Clothing BoutiqueNew York, NY

Photography: Emilio RodriguezFixture: 102-30-P-1S-CFL/4/32-277V-SC-HTG-CBP-28




SERIES MOUNTING LAMP VOLTAGE SHADE MATERIAL OPTIONS103 W CFL/2/18

CFL/2/39INC/2/25



DMA7, DMA10, DML, CBP, EMP, REM or TC

DescriptionThe 103-W ��Rectilinear Fabric Wall Luminaire features 29 standard fabrics. ADA compliant.

Material/Mounting Solid cold-rolled steel fabric and mounting frame. Shades: Solid cold-rolled steel construction. Fabric on heavy translucent white styrene. Matte white acrylic bottom lense, standard. Optional matte white acrylic top lense.

Shade MaterialStandard: Shantung White (SWH). Premium: Shantung Eggshell (SEG), Chintz Chocolate (CCT), Chintz Onyx (CXH), Shantung Beige (SBG), Cinnamon Stick (CNK), Apex (APX), Criss-Cross (CCS), Glasgow Flax (GFX) , Grass Cloth (GSH), Paper Leaf (PPF), Nutmeg Shimmer (NGS), Bronze Shimmer (BZS), Linen Alabaster (LAT), Linen Biscuit (LBS), Silk Ivory (SIY), Silk White (SIW), Linen Chopsticks (LCK), White Krinkle (WHK), Sandstone (SDE), White Corona (WCA), Heather Grey (HTG), Aluminium Shimmer (AMS), Golden Honey - Vinyl Coated (GHY), Natural Flax - Vinyl Coated (NFX), Alabaster- Vinyl Coated (ABR), Natural Bamboo (NLB) , Variegated Bamboo (VDB) or Amber Bamboo (ABB) or Customer Supplied Fabric (CSCC). Refer to pages 78/79 for detailed descriptions. All fabric shades are hand-tucked except for paper options. Many additional stock fabrics are available as a MOD, contact the factory for details. Shaper can accommodate “Customer Supplied Fabric” (CSCC) orders. Please contact your representative for details and minimum quantities.


BallastIntegral electronic HPF, 120/277V (347V Canada), thermally protected with end-of-life circuitry to accommodate the specified lamp wattage. Standard dimming ballasts: Advance Mark 7 (DMA7) or 10 (DMA10) or Lutron (DML). Optional REM; maximum switch remote mount distance is 50’.

Lamp/SocketTwo (2) 18W (2G11) 4-pin RS high lumen or 39W (2G11) 4-pin RS high lumen (rec-ommended for DM option and for use with medium to dark materials) CFL lamps or two (2) 25W frosted T-10 lamps. CFL socket injection-molded plastic. INC socket fired ceramic rated for 660W-250V. Lamps furnished by others.

InstallationSupplied with an integral universal circle strap for standard 4” J-box or plaster ring. Refer to shaperlighting.com for installation instructions and additional drawings.

OptionsCFL Dimming Ballast (39W only) - Advance (DMA7) or (DMA10) or Lutron (DML) Remote Emergency Battery - Supplied by others (REM), Matte White Acrylic Top Cover (TC), Casual “Box” Pleat (CBP), European “Mushroom” Pleat (EMP). Contact factory for NFP701 Fire Resistant or Stain Guard fabric coatings.

LabelsU.L. and C.U.L. approved. ADA compliant. Interior applications only.

ModificationsShaper’s skilled craftspeople with their depth of experience offer the designer the flexibility to modify standard Fabriqué wall luminaires for project-specific solutions. Contact the factory regarding scale options, unique finishes, mounting, additional materials/colors or decorative detailing.

��

��

ORDERING EXAMPLE 103-W-CFL/2/18-120V-CXH

103 SERIESInterior Wall LuminaireRectilinear

Pleats & Materials

103-W-CFL/2/18-120V-WCA


Kansas General Hospital - Post-Surgery WardKansas, MOPhotography: John SuttonFixture: 103-W-CFL/2/39-120V-ABR


1010 HotelNew York, NYPhotography: Douglas SalinFixture: 103-W-SBG

22 shaperlighting.com 103-W-CFL/2/18-120V-ABR

103-W-CFL/2/18-120V-CXH

103-W-CFL/2/39-277V-APX-DMA7

103-W-CFL/2/18-120V-CNK

103-W-CFL/2/39-277V-VDB

103-W-CFL/2/18-120V-CCT

103-W-CFL/2/18-120V-CCS

103-W-CFL/2/18-120V-SBG



SERIES MOUNTING LAMP VOLTAGE FINISH SHADE MATERIAL OPTIONS104 W CFL/2/13

CFL/2/18INC/2/25


(Trims only)NA, SAL, SB, PB, OBRS, SC, PC, SCP, PCP, OCP, GNM, SN, PN, MW or CC


DMA7, DMA10, DML, REM, VXT, RNT, CBP, EMP, SRT or TC

DescriptionThe 104-W �� Square Fabric Wall Luminaire features 29 standard fabrics and 3 Decorative Trim options. ADA compliant.

MaterialCold-rolled steel fabric and solid aluminum or brass modular trim mounting frame. Shades: Solid cold-rolled steel construction. Fabric on heavy translucent white styrene. Matte white acrylic bottom lense, standard. Optional matte white acrylic top lense. Refer to pages 78/79 for detailed descriptions. All fabric shades are hand-tucked except for paper options.

Finish (Optional trims)Standard: Natural Aluminum (NA) . Premium: Lacquered Satin Aluminum (SAL), Satin Brass (SB), Polished Brass (PB), Oxidized Brass (OBRS), Satin Chrome (SC), Polished Chrome (PC), Satin Copper (SCP), Polished Copper (PCP), Oxidized Copper (OCP), Gun Metal (GNM), Satin Nickel (SN), Polished Nickel (PN), Matte White (MW) or Custom Color (CC).

Shade MaterialStandard: Shantung White (SWH). Premium: Shantung Eggshell (SEG), Chintz Chocolate (CCT), Chintz Onyx (CXH), Shantung Beige (SBG), Cinnamon Stick (CNK), Apex (APX), Criss-Cross (CCS), Glasgow Flax (GFX) , Grass Cloth (GSH), Paper Leaf (PPF), Nutmeg Shimmer (NGS), Bronze Shimmer (BZS), Linen Alabaster (LAT), Linen Biscuit (LBS), Silk Ivory (SIY), Silk White (SIW), Linen Chopsticks (LCK), White Krinkle (WHK), Sandstone (SDE), White Corona (WCA), Heather Grey (HTG), Aluminium Shimmer (AMS), Golden Honey- Vinyl Coated (GHY), Natural Flax - Vinyl Coated (NFX), Alabaster - Vinyl Coated (ABR), Natural Bamboo (NLB) , Variegated Bamboo (VDB) , Amber Bamboo (ABB) or Customer Supplied Fabric (CSCC). Refer to pages 78/79 for detailed descriptions. All shades are hand-tucked except for wood and paper options. Many additional stock fabrics are available as a MOD, contact the factory for details. Shaper can accommodate “Customer Supplied Fabric” (CSCC) orders. Please contact your representative for details and minimum quantities.


BallastIntegral electronic HPF, 120 or 277V (347V Canada), thermally protected with end-of-life circuitry to accommodate the specified lamp wattage. Standard dimming ballasts: Advance Mark 7 (DMA7) or 10 (DMA10) or Lutron (DML). Optional REM; maximum switch remote mount distance is 50'.

Lamp/SocketTwo (2) 13W (2GX7) 4-pin low wattage CFL, (2) 18W (G24q-2) 4-pin quad tube CFL lamps or two (2) 25W frosted T-10 lamps. CFL socket injection-molded plastic. INC socket fired ceramic rated for 660W-250V. Lamps furnished by others.

InstallationSupplied with an integral universal circle strap for standard 4” J-box or plaster ring. Refer to shaperlighting.com for installation instructions and additional drawings.

OptionsCFL Dimming Ballast (18W only) Advance (DMA7) or (DMA10) or Lutron (DML) - Remote Emergency Ballast - Supplied by others (REM), Matte White Acrylic Top Cover (TC), Casual "Box" Pleat (CBP), European "Mushroom" Pleat (EMP), Vertex Trim (VXT), Radian Trim (RNT), Spire Trim (SRT). Contact factory for NFP701 Fire Resistant or Stain Guard fabric coatings.

LabelsU.L. and C.U.L. approved. ADA compliant. Interior applications only.

ModificationsShaper’s skilled craftspeople with their depth of experience offer the designer the flexibility to modify Fabriqué standard wall luminaires for project-specific solutions. Contact the factory regarding scale options, unique finishes, mounting, additional materials/colors or decorative detailing.


��

��

��

�� !"��

ORDERING EXAMPLE 104-W-CFL/2/18-277V-SEG-TC

104 SERIESInterior Wall Luminaire Square

Pleats & Materials



104-W-CFL/2/13-120V-OBRS-CCS-RNT 104-W-CFL/2/13-120V-SC-SEG-SRT 104-W-CFL/2/13-120V-OBRS-CNK-VXT

Executive OfficeChicago, IL

Photography: Victor LeonidovichFixture: 104-W-SC-CCT-VXT


104-W-CFL/2/18-277V-AMS104-W-CFL-2/18-277V-HTG

104-W-CFL/2/18-120V-GFX-CBP104-W-CFL/2/18-120V-VDB


104-W-CFL/2/13-120V-APX shaperlighting.com 27104-W-CFL/2/13-120V-GFX

104-W-CFL/2/13-120V-SBG

Summit HotelAlbuquerque, NM

Photography: Douglas SalinFixture: 104-W-SB-SWH-VXT & 102-36-P-1S-MW-SWH




SERIES MOUNTING SHAPE LAMP VOLTAGE FINISH SHADE MATERIAL OPTIONS OA

105 H-L1H-LV2H-LF1

P-HCP-WSJP-CSJP-1S

CNSDMSSQSCYS

INC/1/25 (Except H-LV2)HAL/1/10 CFL/1/13 (CNPY only)

12V (H-LV2 only)120V277V (CFL canopy only)347V (CFL canopy only)

CNPY: NA, P, MB, SL, AH, MW, SAL, SB, PB, OBRS, SC, PC, SCP, PCP, OCP, SN, PN, GNM or CC H-L1: P, SL or MBH-LV2: P, AH or MBH-LF1: AH

GSH, PPF, WHK, NGS, BZS, LAT, LBS, SIY, SIW, SWH, SEG, CCT, CXH, SBG, CNK, APX, CCS, GFX, SDE, WCA, HTG, AMS, NLB, VDB, ABB, LCK or CSCC

SCA, BLM or REM

CNPY: 24” or specifyH: 8’

ORDERING EXAMPLE 105-P-HC-CNS-INC/1/25-120V-NA-LAT-BLM-SCA-24

DescriptionThe 105 Fabriqué Mini-Pendant Luminaires are available in a Cone (CNS), Square (SQS), Cylinder (CYS) or Drum (DMS) for a variety of Halo Track Systems or canopy mount with 27 standard materials.

Material/MountingFabric Shades: Solid cold-rolled steel construction. Fabric, paper or botanicals on heavy translucent white polystyrene or PVC backing. Optional matte white acrylic bottom cover (BLM).Halo Track: Die Cast housing connector - Flexible Architectural Track, Polycarbonate housing connector - Linea Track and Halo Power Trac. Machined brass finial with field-adjustable 8’ long 18AWG clear-jacketed cord (can be field cut).

105–H (Halo Track Systems): (H-L1) Power Trac, (H-LV2) Linea Track or (H-LF1) Architectural Flex Track. Refer to Halo Track spec sheets for material details for Halo Power Trac, Linea Track and Architectural Flex Track. All track systems supplied by Halo. Contact the factory for additional track systems supplied by Halo that are not currently offered with the 105 Pendants.105-P (Pendant): Brass or aluminum 1/2” H X 4 5/8” dia. canopy for incandescent, 1 3/8” H X 4 5/8” dia. canopy for low voltage or 2” H X 5 5/8” dia. canopy for CFL. Supplied with either a 5-conductor White (P-WSJ) or clear SJ Cord (P-CSJ), Single Stem (P-1S) with a standard overall hang height of 24” (OA), minimum 18” (OA) or a Halo field-adjustable 8’ long, 18AWG clear jacketed Twisted Cord (P-HC). Supplied with a self-aligning swivel that will accommodate up to a 18º to 30º (total) adjustment. Specify SCA for sloped ceilings from 31º to 45º. Maximum OA for CFL and LV is 10’ (OA).

FinishCFL/LV/INC Canopy Standard: Natural Aluminum (NA). Premium: Satin White (P) - Halo standard White, Matte Black (MB) - Halo standard black, Aluminum Haze (AH) - Halo Arch Flex & Linea Track standard silver, Silver (SL) - Halo Power Trac standard silver, Matte White (MW), Lacquered Satin Aluminum (SAL), Satin Brass (SB), Polished Brass (PB), Oxidized Brass (OBRS), Satin Chrome (SC), Polished Chrome (PC), Satin Copper (SCP), Polished Copper (PCP), Oxidized Copper (OCP), Satin Nickel (SN), Polished Nickel (PN), Gun Metal (GNM) or Custom Color (CC).Halo Track Systems: Satin White (P), Silver (SL) or Matte Black (MB) - Power Trac, Satin White (P), Aluminum Haze (AH) or Matte Black (MB) - Linea Track or Aluminum Haze (AH) - Flexible Architectural Track.

Shade Material Standard: Silk White (SIW).Premium: Shantung White (SWH), Shantung Eggshell (SEG), Chintz Chocolate (CCT), Chintz Onyx (CXH), Shantung Beige (SBG), Cinnamon Stick (CNK), Apex (APX), Criss-Cross (CCS), Glasgow Flax (GFX), Grass Cloth (GSH), Paper Leaf (PPF), Nutmeg Shimmer (NGS), Bronze Shimmer (BZS), Linen Alabaster (LAT), Linen Biscuit (LBS), Silk Ivory (SIY), White Krinkle (WHK), Linen Chopsticks (LCK), Sandstone (SDE), White Corona (WCA), Heather Grey (HTG), Aluminium Shimmer (AMS), Natural Bamboo - Except CNS (NLB), Variegated Bamboo - Except CNS (VDB) or Amber Bamboo - Except CNS (ABB).

Refer to pages 78/79 for detailed descriptions. All Mini fabric shades are supplied with a minimal trim. Many additional stock fabrics are available as a MOD, contact the factory for details. Shaper can accommodate “Customer Supplied Fabric” (CSCC) orders. Please contact your representative for details and minimum quantities.

BallastCFL Canopy Mount: Integral electronic HPF, 120 or 277V (347V Canada), thermally protected with end-of-life circuitry to accommodate the specified lamp wattage. LV Canopy Mount: HPF, electronic low-voltage transformer. Optional REM; maximum switch remote mount is 50'.

Lamp/SocketCanopy MountLine voltage: One (1) 25W A-15 frosted lamp. Low voltage: One (1) 10W T4 12V halogen lamp. CFL: One (1) 13W (G24q-1) quad CFL lamp. CFL socket injection-molded plastic. INC socket fired ceramic rated for 660W-250V. Halo Track MountLine voltage: One (1) 25W A-15 or G15.5 frosted lamp. Low voltage: One (1) 10W T4 12V halogen lamp.* *For use with Linea Track. Can be used with Flexible Arch Track when used with LF2LV 12V Converter or LF2005/LF2006 transformers or Halo Power Trac when used with L2004/L2005 track transformers. Converters and transformers supplied by Halo, refer to Halo specification sheets for details. Lamps furnished by others.

InstallationCFL, LV or INC Canopy Mount: Supplied with either a circle strapmounting canopy or bar strap that mounts to a 4” J-box or plaster ring. Refer to specification sheets for additional drawings and installation instructions. Track Mount: Shaper Fabriqué Minis are compatible with Halo Power Trac, Linea and Architectural Flex Track. Visit haloltg.com under track category for specific installation instructions. Track systems, converters and LV transformers supplied by Halo Lighting. Fixtures specified with 8’ Halo clear cord are field adjustable; refer to Halo installation sheets for details.

OptionsSloped Ceiling Adaptor (CNPY only) - Specify up to 31º to 45º (SCA), Remote Emergency (CFL CNPY only) - Supplied by others (REM), Acrylic Bottom Cover (BLM). Contact factory for NFP701 Fire Resistant or Stain Guard coatings.

LabelsU.L. and C.U.L. approved. Shaper Fabriqué Mini-Pendants are only UL/CSA listed for Cooper Lighting track systems. Interior applications only.

ModificationsShaper’s skilled craftspeople with their depth of experience offer the designer the flexibility to modify standard Mini-Pendants Luminaires for project-specific solutions. Contact the factory regarding scale options, unique finishes, mounting, additional materials/colors or decorative detailing. Contact Halo Lighting for Track modifications.

105 SERIESInterior Mini-Pendant & Track LuminairesCone, Square, Cylinder and Drum

(Select one)

Pleats & Materials


105 MountingHalo Architectural Flexible Track (H-LF1)

Miniature Power TracLow-profile, single-circuit track. Eco-nomical to install and extremely versatile in application. Especially well suited for residential and light commercial use.

Halo-2 Power TracAllows two circuits to be individually switched. Provides independent control of lampholders on a single track. Perfect for commercial, residential or retail applications.

Single-Circuit Raceway Halo Power Trac Integral raceway allows additional circuits to be fed from one outlet box. Very efficient for commercial or long-run installations.

Four-Circuit Halo Power TracFour separate 20A circuits provide four times the capacity, four times the control, four times the convenience in each Power Trac section.

Recessed Housing Halo Power TracUnique recessed channel accommodates Miniature or Halo-2 Power Trac sections. Can be used with any ceiling materials and can be formed into L, T or X configurations.

Halo 2 Circuit Architectural Track 120V or 277V system provides two sepa-rate 40 AMP circuits and two neutrals.

��#��

��

��

��

$� ��%� )�*%��,�-��.�1/'��-)��/�*1�2�,

3 '/�4)) �

$� ��5�0�*5$�,�-��.�1/'��2� )/��/6�*1�2!�,

$� ��70/�)�*�8�,�-��.�1/'��9'):��/6�*1�29�,

��#��

��

��

��

��#��

��

��

��

3 '/�4)) �

3 '/�4)) �

��

��

��

��

��

$� ��%&'� ()��*%+�,�-��.�%/ ��&�$�0 ��*%��+��,

Note: Refer to Halo Track spec sheets for material details for Halo Power Trac, Linea and Architectural Flex Track. All track systems supplied by Halo.

Halo Power Trac (H-L1)

Extruded aluminum I-beam 0.060” nominal wall thickness. Flexible Track is 1-1/2” high by 7/16” wide. Halo Archi-tectural Flexible Track is a three-circuit, hand-bendable track system.

Linea low-voltage system provides minimal size and weight. Operates with a remote LV transformer.

Halo Linea Track (H-LV2)


105-P-1S-CYS-CFL/1/13-120V-SB-PPF-24

105-P-1S-SQS-CFL/1/13-277V-SAL-VDB-20

105-P-1S-CYS-INC/1/25-12V-OCP-GSH-18

105-P-1S-DMS-CFL/1/13-120V-SC-ABB-24



Mount Karimari SushiToronto, CanadaPhotography: Raf MakdaFixture: 105-P-1S-CYS-CFL/1/13-277V-SN-NLB-30


Private ResidenceSan Francisco, CAArchitect: Feldman Architecture, Inc.Photography: Paul Dyer Fixture: 105-P-HC-CYS-INC/1/25-120V-SAL-GSH-36

105-P-1S-CYS-CFL/1/13-OBRS-NLB-20 105-P-1S-SQS-CFL/1/13-277V-MW-NGS-2232 shaperlighting.com

105-P-1S-DMS-INC/1/25-120V-WCA-24

105-H-LF1-DMS-INC/1/25-12OV-AH-WHK-8 105-P-1S-CNS-HAL/1/10-12V-SCP-SIY-26

105-P-1S-SQS-HAL/1/10-12V-OBRS-BZS-25



SERIES SIZE MOUNTING LAMP VOLTAGE FINISH SHADE MATERIAL OPTIONS OA 106 28"

40"52"

SP-1SP-1SAC3FCL4FCLWMTA

T5/3/14 (28”)T5/3/24HO (28")T5/3/21 (40”)T5/3/39HO (40")T5/3/28 (52”)T5/3/54HO (52”)

120V277V 347V

NA, SAL, MW, SM, BM, SB, PB, OBRS, SC, PC, SCP, PCP, OCP, SN,SN, PN, SCP, PCP, OCP, GNM or CC

SWH, SEG, CCT, CXH, SBG, GFX, CNK, APX, CCS, PPF, NGS, BZS, LAT, LBS, SIY, SIW, WHK, SDE, WCA, HTG, AMS, GHY, NFX, ABR, NLB, VDB, ABB or CSCC

DMA7, DMA10, DML, IEM, SCA, EMP, CBP, RSQSIS + EDT, WMT or SMO, TRDSIS + EDT, WMT or SMO, CRDSIS + EDT, WMT or SMO, MPRD + EDTR, WMTR or SMOR, MMRDL, MMRDT, MMRDS or TC

(1S or 1SAC)28” Ht. = 40” OA40” Ht. = 54” OA52” Ht. = 64” OA(3FCL)28" Ht. = 92" OA40" Ht. = 122" OA52" Ht. = 152" OA or specify(4FCL)28" Ht. = 112" OA40" Ht. = 152" OA52" Ht. = 192" OA or specify

DescriptionThe 106 �� Round Cylinder Pendant, Surface, Wall and Cluster Luminaires features 29 shade materials, multiple mounting options, Metal Motifs (Patent Pending), Metal Panel (Patent Pending) and three Shade-in-a-Shade options.

Material/MountingCold-rolled steel and aluminum wire body, painted white. Supplied with matte white acrylic bottom diffuser with one finial, standard. Optional matte white acrylic top cover.Shades: 10” Round solid cold-rolled painted steel construction. Fabric on heavy translucent white styrene. Refer to pages 78/79 for detailed material descriptions.Optional Shade-in-a-Shade (CRDSIS, RSQSIS or TRDSIS): Solid cold-rolled steel frame construction with exposed metal painted white, silver or gold to match specified organza. Organza adhered to heavy clear vinyl backing. Metal Motifs (MMRDL, MMRDT or MMRDS): Solid aluminum or steel laser-cut construction with integral mounting tabs. Metal Panel (MPRD): Solid aluminum or steel panel construction with integral mounting tabs with resin inserts (106-P only).

106-S (Surface): Cold-rolled steel surface mount canopy, painted white.106-P (Pendant): Single Stem (1S): 5” canopy with a 1/2” stem self-aligning swivel. One 1/2” stem with a standard hang height of 40” (OA) for 28” Ht., minimum 32”, 54” (OA) for 40” Ht., minimum 44”, and 64” (OA) for 52” Ht., minimum 56” (OA). Maximum overall hang height for one-piece stem assembly is 8’ (OA). 9’ to 25' (OA) stems are supplied in multiple sections. Supplied with a hang straight swivel canopy that will accommodate up to 34° (total) adjustment. Specify SCA for sloped ceiling applications from 18° to 45°. Single Stem Aircraft Cables (1SAC): One 1/2” stem and 3-3/64” cables with a standard hang height of 40” (OA) for 28” Ht., minimum 32”, 54” (OA) for 40” Ht., minimum 44”, and 64” (OA) for 52” Ht., minimum 56” (OA). Maximum overall hang height is 25’ (OA). 8’ to 25’ stems are supplied in multiple sections. Contact factory for lengths above 25’. Supplied with a hang straight swivel canopy that will accommodate up to 34° (total) adjustment. Three Fixture Pendant Cluster (3FCL): 22” Round aluminum canopy with three 1/2” stems with with a hang straight swivel with a standard hang height of 92" (OA) for 28” Ht., minimum 76”, 152" (OA) for 40” Ht., minimum 108”, and 152" (OA) for 52” Ht., minimum 140” (OA). Contact factory for SCA and MOD OA. Four Fixture Pendant Cluster (4FCL): 22” Round aluminum or steel canopy with four 1/2” stems with a hang straight swivel canopy with a standard hang height of of 112" (OA) for 28” Ht., minimum 96”, 152" (OA) for 40” Ht., minimum 138”, and 192" (OA) for 52” Ht., minimum 180” (OA). Contact factory for SCA and MOD OA. Wall Mount Arm (WMTA): Solid aluminum or steel wall mount arm with a stainless steel aircraft cable.

Finish (Stem, Motifs, Panel, canopy and finial)Standard: Natural Aluminum (NA) . Premium: Matte White (MW), Bronze Metallic Paint (BM), Silver Metallic Paint (SM), Lacquered Satin Aluminum (SAL), Satin Brass (SB), Polished Brass - Except Metal Motifs (PB), Oxidized Brass (OBRS), Satin Chrome (SC), Polished Chrome - Except Metal Motifs (PC), Satin Copper (SCP), Polished Copper - Except Metal Motifs (PCP), Oxidized Copper (OCP), Satin Nickel (SN), Polished Nickel - Except Metal Motifs (PN), Gun Metal (GNM) or Custom Color (CC). Metal Motifs are not available in polished plated finishes.Note: Mounting hardware for surface mount luminaire is pre-painted white.Contact factory for multi-finishes i.e. MW finial with SC stems/canopy.

Shade MaterialStandard: Silk White (SIW).Premium: Shantung White - 28” & 48” only (SWH), Shantung Eggshell (SEG), Chintz Chocolate (CCT), Chintz Onyx (CXH), Shantung Beige (SBG), Cinnamon Stick (CNK), Apex (APX), Criss-Cross (CCS), Glasgow Flax - 28” & 48” only (GFX), Paper Leaf - 28” & 48” only (PPF), Nutmeg Shimmer (NGS), Bronze Shimmer (BZS), Linen Alabaster - 28” & 48” only (LAT), Linen Biscuit - 28” & 48” only (LBS), Silk Ivory (SIY), White Krinkle - 28” & 48” only (WHK), Sandstone (SDE), White Corona (WCA), Heather Grey (HTG), Aluminium Shimmer (AMS), Golden Honey - Vinyl Coated- 28” & 48” only (GHY), Natural Flax - Vinyl Coated - 28” & 48” only (NFX), Alabaster - Vinyl Coated - 28” & 48” only (ABR), Natural Bamboo (NLB) , Variegated Bamboo (VDB) or Amber Bamboo (ABB) or Customer Supplied Fabric (CSCC). Optional Shade-in-a-Shade (SIS) Earth Dust (EDT), White Mist (WMT) or Silver Moon (SMO) or Metal Panel (MP): Earth Dust - Resin (EDTR), White Mist - Resin (WMTR) or Silver Moon - Resin (SMOR). All shades are "Hand-Tucked" except for paper and wood options. Refer to pages 76/77 for detailed material descriptions. Many additional stock fabrics are available as a MOD; contact the factory for details. Shaper can accommodate “Customer Supplied Fabric” (CSCC) orders. Please contact your representative for details and minimum quantities.


BallastIntegral electronic HPF, 120/277V (347V Canada), thermally protected with end-of-life circuitry to accommodate the specified lamp wattage 120/277V IEM & DM only. Contact factory for 347V DM. Standard dimming ballasts: Advance-HO Mark 10 (DMA10) or Lutron (DML).


ORDERING EXAMPLE 106-28-P-1S-T5/1/14-120V-NA-SWH-DML-TC-42

106 SERIESInterior Surface, Pendant & Wall LuminairesRound Cylinder



��;

��<��

�� <��

��<��

��<��

��;

��<��

�� <��

��<��

��<��

��;

�� <��

�� <��

��<��

��<��

��<��

��<��

��<��

��;

�� <��

��<��

��<��

��;

��;

��<��

�� <��

��<��

��<��

��<��

106 Mounting


Lamp/Socket28”: Three (3) 14W or 24W HO T5 linear fluorescent lamps.40”: Three (3) 21W or 39W HO T5 linear fluorescent lamps.52”: Three (3) 28W or 54W HO T5 linear fluorescent lamps.Note: When specifying the Advance dimming option, only Advance Mark 10 7 or 10 are available. Specify (3) 54WHO T5 (106-52") lamping. T5HO lamps are recommended for use with medium to dark materials. Lamps furnished by others.

Installation106-S: Supplied with a universal linear strap for standard 4” J-box or plaster ring. Integral safety cable provided.106-P: Supplied with a universal integral mounting strap for a standard 4” J-box or plaster ring. 106-WMTA: Arm supplied with a universal circle strap pattern for 3 1/2" & 4" J- boxes and switch boxes. The arm attaches to a standard 1/2" stem via a coupler. Integral safety cable provided.106-FCL: Supplied with an integral mounting pan and cover for a standard 4” Junction Box. J-Box to be framed and/or supported by building structure. Integral safety cable provided. Contractor to provide appropriate structural support for fixture weight. Refer to shaperlighting.com for installation sheets and additional drawings.

OptionsFL T5 Dimming Ballast: Advance Mark 10 (DMA10), Advance Mark 7 (DMA7)- Available with (3) 54WHO T5 (101-52") only or Lutron (DML). Sloped Ceiling Adaptor (SCA), Matte White Acrylic Top Cover -Except 101-S (TC), Integral Emergency Battery (IEM), Round Square Shade-in-a-Shade - Except 101-S (RSQSIS), Top Round Shade-in-a-Shade- Except 101-S (TRDSIS) or Center Round Shade-in-a Shade (CRDSIS) + EDT, WMT or SMO, European “Mushroom Pleat” (EMP), Casual Box Pleat (CBP), Metal Motif Round Lune (MMRDL), Metal Motif Round Tangent (MMRDT), Metal Motif Round Salinon (MMRDS), Metal Panel Round (MPRD) + EDTR, WMTR or SMOR. Contact factory for NFP701 Fire Resistant or Stain Guard fabric coatings.


ModificationsShaper’s skilled craftspeople with their depth of experience offer the designer the flexibility to modify standard Fabriqué Wall, Surface and Pendant luminaires for project-specific solutions. Contact the factory regarding scale options, unique finishes, mounting, additional materials/colors or decorative detailing.


106-40-P-1S-T5/3/21-120V-CC-SIW-MPRD-EDTR

106-40-P-1S-T5/3/24-120V-CC-MPRD-EDTR

106-28-WMTA-T5/3/14-120V- SAL-SEG


Heritage Forest Country Club Denver, COPhotography: David BeightolFixture: M106-28/40/52/-SIY



Bistro QuePhiladelphia, PAPhotography: Edmund SumnerFixture: 106-52-P-1S-T5/3/28-277V-SB-SEG-CRDSIS-EDT

106-28-3FCL-T5/3/14-120V-SC-SIW

106-28-P-1S-T5/3/14-120V- MW-SIW

shaperlighting.com 39106-40-P-1S-T5/3/21-120V-MW-SIW-MMRDS



Women's High-End BoutiqueLos Angeles, CA

Photography: Peter CookFixture: 106-28-P-1S-T5/3/14-

120V-CC-SDE-RSQSIS-EDT


106-52-P-1S-T5/3/28-120V-SDE-56106-52-P-1S-T5/3/28-120V-CCT-56


106-40-P-1S-T5/3/21-120V-SIW-CRDSIS-WMT-44

106-40-P-1S-T5/3/21-277V-SN-SIW-MMRDT-40

42 shaperlighting.com 106-52-S-T5/3/28-120V-SEG-CRDSIS-EDT

106-40-P-1S-T5/3/21-277V-SC-SIW-TRDSIS-SMO-44

106-52-P-1S-T5/3/28-120V-SAL-NLB-56

106-40-S-T5/3/21-120V-SM-SIW-MMRDL106-28-P-1S-T5/3/14-277V-SDE-32




SERIES SIZE MOUNTING LAMP VOLTAGE FINISH SHADE MATERIAL OPTIONS OA 107 28"

40"52"

SP-1SP-1SAC3FCL4FCLWMTA

T5/3/14 (28”)T5/3/24HO (28")T5/3/21 (40”)T5/3/39HO (40")T5/3/28 (52”)T5/3/54HO (52”)

120V277V 347V

NA, SAL, MW, BM, SM, SB, PB, OBRS, SC, PC, SCP, PCP, OCP, SN,SN, PN, SCP, PCP, OCP, GNM or CC

SWH, SEG, CCT, CXH, SBG, GFX, CNK, APX, CCS, ABB, NLB, VDB, GSH, PPF, NGS, BZS, LAT, LBS, SIY, SIW, LCK, WHK, SDE, WCA, HTG, AMS, ABR, GHY, NFX or CSCC

DMA7, DMA10, DML, IEM, SCA, EMP, CBP, TSQSIS + EDT, WMT or SMO, CSQSIS + EDT, WMT or SMO, MPSQ + EDTR, WMTR or SMOR, MMSQM, MMSQC, MMSQR or TC

(P-1S & P-1SCA only)28” Ht. = 40” OA40” Ht. = 54” OA52” Ht. = 64” OA

(3FCL)28" Ht. = 92" OA40" Ht. = 122" OA52" Ht. = 152" OAor specify

(4FCL)28" Ht. = 112" OA40" Ht. = 152" OA52" Ht. = 192" OAor specify

DescriptionThe 107 Fabriqué Square Cylinder Pendant, Surface, Wall and Cluster Luminaires features 29 shade materials, multiple mounting options, Metal Motifs (Patent Pending), Metal Panel (Patent Pending) and two Shade-in-a-Shade options.

Material/MountingCold-rolled steel and aluminum wire body, painted white. Supplied with matte white acrylic bottom diffuser with one finial, standard. Optional matte white acrylic top cover. Fabric Shades: 10” Square solid cold-rolled painted steel construction. Fabric on heavy translucent white styrene. Optional Shade-in-a-Shade (CSQSIS or TSQSIS): Solid cold-rolled steel construction with exposed metal painted white, silver or gold to match specified organza. Organza adhered to heavy clear vinyl backing.Metal Motifs (MMSQM, MMSQC or MMSQR): Solid aluminum or steel laser-cut construction with integral mounting tabs. Metal Panel (MPSQ): Solid aluminum or steel panel construction with integral mounting tabs and flat resin inserts. Refer to pages 78/79 for detailed material descriptions.

107-S (Surface): Cold-rolled steel surface mount canopy, painted white.107-P (Pendant): Single Stem (1S): 5” canopy with a 1/2” stem-self aligning swivel. One 1/2” stem with a standard hang height of 40” (OA) for 28” Ht., minimum 32”, 54” (OA) for 40” Ht., minimum 44”, and 64” (OA) for 52” Ht., minimum 56” (OA). Maximum overall hang height for one-piece stem assembly is 8’ (OA). 9’ to 25' (OA) stems are supplied in multiple sections. Supplied with a hang straight swivel canopy that will accommodate up to 34° (total) adjustment. Specify SCA for sloped ceiling applications from 18° to 45°. Single Stem Aircraft Cables (1SAC): One 1/2” stem and 3-3/64” cables with a standard hang height of 40” (OA) for 28” Ht., minimum 32”, 54” (OA) for 40” Ht., minimum 44”, and 64” (OA) for 52” Ht., minimum 56” (OA). Maximum overall hang height is 25’ (OA). 8’ to 25’ stems are supplied in multiple sections. Contact factory for lengths above 25’. Supplied with a hang straight swivel canopy, that will accommodate up to 34° (total) adjustment. Three Fixture Pendant Cluster (3FCL): 22” Round aluminum canopy with three 1/2” stems with a hang straight swivel with a standard hang height of 92" (OA) for 28” Ht., minimum 76”, 122" (OA) for 40” Ht., minimum 108” and 152” (OA) for 52” Ht., minimum 140” (OA). Contact factory for SCA and MOD OA. Four Fixture Pendant Cluster (4FCL): 22” Round aluminum or steel canopy with four 1/2” stems with a hang straight swivel with a standard hang height of of 112" (OA) for 28” Ht., minimum 96”, 152" (OA) for 40” Ht., minimum 138” and 192" (OA) for 52” Ht., minimum 180” (OA). Contact factory for SCA and MOD OA.

Wall Mount Arm (WMTA): Solid aluminum, steel or brass wall mount arm with a stainless steel aircraft cable.

Finish (Stem, Motifs, Panel, canopy and finial)Standard: Natural Aluminum (NA) .Premium: Matte White (MW), Bronze Metallic Paint (BM), Silver Metallic Paint (SM), Lacquered Satin Aluminum (SAL), Satin Brass (SB), Polished Brass - Except Metal Motifs (PB), Oxidized Brass (OBRS), Satin Chrome (SC), Polished Chrome - Except Metal Motifs (PC), Satin Copper (SCP), Polished Copper - Except Metal Motifs (PCP), Oxidized Copper (OCP), Satin Nickel (SN), Polished Nickel - Except Metal Motifs (PN), Gun Metal (GNM) or Custom Color (CC). Metal Motifs are not available in polished plated finishes.Note: Mounting hardware for surface mount luminaire is painted white.Contact factory for multi-finishes i.e. MW finial with SC stems/canopy.

Shade MaterialStandard: Silk White (SIW).Premium: Shantung White - 28” & 48” only (SWH), Shantung Eggshell (SEG), Chintz Chocolate (CCT), Chintz Onyx (CXH), Shantung Beige (SBG), Cinnamon Stick (CNK), Apex (APX), Criss-Cross (CCS), Glasgow Flax - 28" & 48” only (GFX), Paper Leaf - 28” & 48” only (PPF), Nutmeg Shimmer (NGS), Bronze Shimmer (BZS), Linen Alabaster - 28” & 48” only (LAT), Linen Biscuit - 28” & 48” only (LBS), Silk Ivory (SIY), White Krinkle - 28” & 48” only (WHK), Sandstone (SDE), White Corona (WCA), Heather Grey (HTG), Aluminium Shimmer (AMS), Golden Honey - Vinyl Coated- 28” & 48” only (GHY), Natural Flax - Vinyl Coated - 28” & 48” only (NFX), Alabaster - Vinyl Coated - 28” & 48” only (ABR), Natural Bamboo (NLB) , Variegated Bamboo (VDB) or Amber Bamboo (ABB) or Customer Supplied Fabric (CSCC). Optional Shade-in-a-Shade (SIS) Earth Dust (EDT), White Mist (WMT) or Silver Moon (SMO) or Metal Panel (MP): Earth Dust - Resin (EDTR), White Mist - Resin (WMTR) or Silver Moon - Resin (SMOR). All shades are "Hand-Tucked" except for paper and wood options. Refer to pages 78/79 for detailed material descriptions. Many additional stock fabrics are available as a MOD, contact the factory for details. Shaper can accommodate “Customer Supplied Fabric” (CSCC) orders. Please contact your representative for details and minimum quantities.




ORDERING EXAMPLE 107-28-WMTA-T5/3/14-277V-OCP-CCT-EMP

107 SERIESInterior Surface, Pendant & Wall LuminairesSquare Cylinder


��

��<��

�� <��

��8��<��

��<��

��

��<��

�� <��

��8��<��

��<��

��

�� <��

�� <��

��8��<��

��<��

��<��

��<��

��8��<��

�� <��

��<��

��8��<��

��

��<��

�� <��

��8<��<��

��

��8��<��

��8��<��

107 Mounting

100 Series FabriquéLamp/Socket

28”: Three (3) 14W or 24W HO T5 linear fluorescent lamps.40”: Three (3) 21W or 39W HO T5 linear fluorescent lamps.52”: Three (3) 28W or 54W HO T5 linear fluorescent lamps.Note: When specifying the Advance dimming option, only Advance Mark 7 or 10 are available. Specify (3) 54WHO T5 (106-52") lamping. T5HO lamps are recommended for use with medium to dark materials. Lamps furnished by others.

Installation107-S: Supplied with a universal linear strap for standard 4” J-box or plaster ring. Integral safety cable provided.107-P: Supplied with a universal integral mounting strap for a standard 4” J-box or plaster ring. Integral safety cable provided. 107-WMTA: Arm supplied with a universal circle strap pattern for 3 1/2" & 4" J-boxes and switch boxes. The arm attaches to a standard 1/2" stem via a coupler. Integral safety cable provided. J-box to be framed and/or supported by building structure. 107-FCL: Supplied with an integral mounting pan and cover for a standard 4” junction box. Integral safety cable provided. Contractor to provide appropriate structural support for fixture weight. Refer to shaperlighting.com for installation sheets and additional drawings.

OptionsFL T5 Dimming Ballast: Advance Mark 10 (DMA10), Advance Mark 7 (DMA7) - Available with (2) 54WHO T5 (101-52") only or Lutron (DML). Sloped Ceiling Adaptor (SCA), Matte White Acrylic Top Cover -Except 107-S (TC), Integral Emergency Battery (IEM), Top Square Shade-in-a-Shade - Except 107-S (TSQSIS) or Center Square.

Shade-in-a-Shade (CSQSIS) + EDT, WMT or SMO, European “Mushroom Pleat” (EMP), Casual Box Pleat (CBP), Metal Motif Square Mondrian (MMSQM), Metal Motif Square Curvilinear (MMSQC), Metal Motif Square Rhombus (MMSQR), Metal Panel Square (MPSQ) + EDTR, WMTR or SMOR. Contact factory for NFP701 Fire Resistant or Stain Guard fabric coatings.


ModificationsShaper’s skilled craftspeople with their depth of experience offer the designer the flexibility to modify standard Fabriqué Wall, Surface and Pendant luminaires for project specific solutions. Contact the factory regarding scale options, unique finishes, mounting, additional materials/colors or decorative detailing.


Boutique HotelSt. Louis, MO

Photography: John SuttonFixture: 107-28-P-1S-T5/3/14-120V-SAL-GFX-40


107-28-S-T5/3/14-120V-SM-HTG-MMSQM

107-28-P-1S-T5/3/14-120V-SAL-HTG-32107-28-P-1S-T5/3/14-120V-BM-MPSQ-EDTR-40


107-40-S-T5/3/21-277V-BM-SDE-MMSQC

107-28-P-1S-T5/3/14-120V-SAL-GFX-32

Boutique HotelAtlanta, GA

Photography: John SuttonFixture: 107-40-P-1S-T5/3/21-277V-SAL-ABB-4448 shaperlighting.com

107-28-WMTA-T5/3/14-120V-SAL-GFX

107-4FCL-28-T5/3/14-120V-SAL-SIW-92

High Performance Pendants



107-28-P-1S-T5/3/14-120V-SM-SIW-MMSQM-32


107-52-P-1S-T5/3/28-120V-SAL-SBG-56

107-52-S-T5/3/28-120V-SAL-SIW-MMSQR

shaperlighting.com 51107-40-P-1S-T5/3/21-277V-SC-SIW-TSQSIS-SMO-44

107-40-P-1S-T5/3/21-120V-SAL-GFX-54



SERIES SIZE MOUNTING LAMP VOLTAGE FINISH SHADE MATERIAL OPTIONS OA 108 52" S

P-1SWMTA

T5/3/28T5/3/54HO

120V277V 347V

NA, SAL, MW, SB,PB, OBRS, SC, PC,SCP, PCP, OCP,SN, PN, SCP, PCP, OCP, GNM or CC

SEG, CCT, CXH, SBG, CNK, APX, CCS, NGS, BZS, LBS, SIY, SIW, SDE, WCA, HTG, AMS or CSCC

DMA7, DMA10, DML, IEM, SCA or TC

(Pendant only)52” Ht. = 64” OAor specify

DescriptionThe 108 �� Tapered Cylinder Pendant, Surface and Wall Luminaires features 16 shade materials, multiple mounting options and are supplied in a European Mushroom Pleat.

Material/MountingCold-rolled steel and aluminum wire body, painted white. Supplied with matte white acrylic bottom diffuser with one finial, standard. Optional matte white acrylic top cover.Fabric Shade: 8" to 13" Tapered solid cold-rolled painted steel construction. Supplied with European Mushroom Pleated fabric with "soft-back" white stretch lining underneath the specified fabric.108-S (Surface): Cold-rolled steel surface mount canopy, painted white.108-P (Pendant): Single Stem (1S): 5” canopy with a 1/2” stem self-aligning swivel. One 1/2” stem with a standard hang height of 64” (OA) for 52” Ht., minimum 56” (OA). Maximum overall hang height for one-piece stem assembly is 8’ (OA). 9’ to 25' (OA) stems are supplied in multiple sections. Supplied with a hang straight swivel canopy that will accommodate up to 34° (total) adjustment. Specify SCA for sloped ceiling applica-tions from 18° to 45°. Wall Mount Arm (WMTA): Solid aluminum or steel wall mount arm with a stain-less steel aircraft cable.

Finish (Stem, canopy and finials)Standard: Natural Aluminum (NA) .Premium: Matte White (MW), Lacquered Satin Aluminum (SAL), Satin Brass (SB), Polished Brass (PB), Oxidized Brass (OBRS), Satin Chrome (SC), Polished Chrome (PC), Satin Copper (SCP), Polished Copper (PCP), Oxidized Copper (OCP), Satin Nickel (SN), Polished Nickel (PN), Gun Metal (GNM) or Custom Color (CC).Note: Mounting hardware for surface mount luminaire is painted white.

Shade MaterialStandard: Silk White (SIW).Premium: Shantung Eggshell (SEG), Chintz Chocolate (CCT), Chintz Onyx (CXH), Shantung Beige (SBG), Cinnamon Stick (CNK), Apex (APX), Criss-Cross (CCS), Nutmeg Shimmer (NGS), Bronze Shimmer (BZS), Silk Ivory (SIY), Sandstone (SDE), White Corona (WCA), Heather Grey (HTG), Aluminium Shimmer (AMS) or Customer Supplied Fabric (CSCC). Many additional stock fabrics are available as a MOD; contact the factory for details. Shaper can accommodate “Customer Supplied Fabric” (CSCC) orders. Please contact your representative for details and minimum quantities. Natural materials and textiles. Refer to pages 78/79 for detailed descriptions.



Lamp/Socket52”: Three (3) 28W or 54W HO T5 linear fluorescent lamps.Note: When specifying the Advance dimming option, only Advance Mark 7 or 10 are available. Specify (3) 54WHO T5 lamps. T5HO lamps are recommended for use with medium to dark materials. Lamps furnished by others.

Installation108-S: Supplied with a universal linear strap for standard 4” J-box or plaster ring. Integral safety cable provided.108-P: Supplied with a universal integral mounting strap for a standard 4” J-box or plaster ring. Integral safety cable provided.108-WMTA: Arm supplied with a universal circle strap pattern for 3 1/2" & 4" J-boxes and switch boxes. The arm attaches to a standard 1/2" stem via a coupler. Integral safety cable provided. J-box to be framed and/or supported by building structure. Contractor to provide appropriate structural support for fixture weight. Refer to shaperlighting.com for installation sheets and additional drawings.

OptionsFL T5 Dimming Ballast: Advance Mark 10 (DMA10) - 54W T5HO only or Lutron (DML), Sloped Ceiling Adaptor (SCA), Matte White Acrylic Top Cover - Except 108-S (TC), Integral Emergency Battery (IEM). Contact factory for NFP701 Fire Resistant or Stain Guard fabric coating.




ORDERING EXAMPLE 108-52-P-1S-T5/3/54HO-120V-NA-CCT-DML-TC-42

108 SERIESInterior Surface, Pendant & Wall LuminairesTapered Cylinder

Pleats & Materials

108 Mounting

108-52-WMTA-T5/3/28-120V-SAL-SIW 108-52-S-T5/3/28-120V-SEG



��<��

� �� <��

��<��

�� <��

� �� <��

��<��

�� =$�>�

��*��<��,

��*��<��, ��?

��*��<��,

� ��* <��,

�;��*��<��,

��*��<��,


Graff, Howard & Steward Interiors, Inc.Miami, FL

Photography: John SuttonFixture: 108-52-P-1S-T5/3/28-277V-SC-SEG-52


108-52-P-1S-T5/3/28-120V-OBRS-SEG-56


108-52-P-1S-T5/3/28-120V-SAL-HTG-56 108-52-P-1S-T5/3/28-120V-SC-SIW-56


SERIES SIZE MOUNTING LAMP VOLTAGE FINISH SHADE MATERIAL OPTIONS OA 109 18”

24”30”

SP-1SP-1SACWMTA

CFL/2 (26 - Triple 18”)CFL/3 (32 - Triple 24”)T5/3/24HO (30”)INC/2/60 (18”)INC/3/60 (24”)INC/4/60 (30”)


NA, SAL, MW, SB,PB, OBRS, SC, PC,SCP, PCP, OCP, SN,PN, GNM or CC

SWH, SEG, CCT, CXH, SBG, GFX, CNK, APX, CCS, ABB, NLB, VDB, ARB, GSH, PPF, NGS, BZS, LAT, LBS, SIY, SIW, LCK, WHK, SDE, WCA, HTG, AMS, GHY, NFX or CSCC

DMA7, DMA10, DML, IEM, SCA, EMP, CBP or TC

(Pendant only)18” Dia. = 30” OA24” Dia. = 36” OA30” Dia. = 42” OAor specify


ORDERING EXAMPLE 109-18-S-CFL/2/26-277V-NA-SWH

DescriptionThe 109 �� Cube Pendant, Wall and Surface Luminaires features 29 standard fabrics and multiple mounting options.

Material/MountingCold-rolled steel and aluminum wire body, painted white. Matte white acrylic bottom diffuser with one finial, standard. Optional matte white acrylic top cover.Shades: Solid cold-rolled painted steel construction. Fabric on heavy translucent white styrene.

109-S (Surface): Cold-rolled steel surface mount canopy, painted white.109-P (Pendant):Single Stem (1S): 5” Square canopy with a 1/2” stem self-aligning swivel. One

1/2” stem with a standard hang height of 30” (OA) for 18” Sq., minimum 24”, 36” (OA) for 24” Sq., minimum 30” and 42” (OA) for 30” Sq., minimum 36” (OA). Maximum overall hang height for one-piece stem assembly is 8’ (OA). 9’ to 25’ (OA) stems are supplied in multiple sections. Supplied with a hang straight swivel canopy that will accommodate up to 34° (total) adjustment. Specify SCA for sloped ceiling applications from 18° to 45°. Single Stem Aircraft Cables (1SAC): One 1/2” stem and 4-3/64” cables with a standard hang height of 30” (OA) for 18” Sq., minimum 24”, 36” (OA) for 24” Sq., minimum 30” and 42” (OA) for 30” Sq., minimum 36” (OA). Maximum overall hang height is 25’ (OA). 8’ to 25’ stems are supplied in multiple sections. Contact factory for lengths above 25’. Wall Mount Arm - Except 30” (WMTA): Solid aluminum wall mount arm with stainless steel aircraft cable.

Finish (Stem, canopy and finial)Standard: Natural Aluminum (NA). Premium: Matte White (MW), Lacquered Satin Aluminum (SAL), Satin Brass (SB), Polished Brass (PB), Oxidized Brass (OBRS), Satin Chrome (SC), Polished Chrome (PC), Satin Copper (SCP), Polished Copper (PCP), Oxidized Copper (OCP), Satin Nickel (SN), Polished Nickel (PN), Gun Metal (GNM) or Custom Color (CC). Note: Mounting hardware for surface mount luminaire is pre-painted white.

Shade MaterialStandard: Shantung White (SWH).Premium: Shantung Eggshell (SEG), Chintz Chocolate (CCT), Chintz Onyx (CXH), Shantung Beige (SBG), Cinnamon Stick (CNK), Apex (APX), Criss-Cross (CCS), Glasgow Flax (GFX), Grass Cloth (GSH), Paper Leaf (PPF), Nutmeg Shimmer (NGS), Bronze Shimmer (BZS), Linen Alabaster (LAT), Linen Biscuit (LBS), Silk Ivory (SIY), Silk White (SIW), Linen Chopsticks (LCK), White Krinkle (WHK), Sandstone (SDE), White Corona (WCA), Heather Grey (HTG), Aluminium Shimmer (AMS), Golden Honey - Vinyl Coated (GHY), Natural Flax - Vinyl Coated (NFX), Alabaster - Vinyl Coated (ABR), Natural Bamboo (NLB) , Variegated Bamboo (VDB) or Amber Bamboo (ABB) or Customer Supplied Fabric (CSCC). Many additional stock fabrics are available as a MOD; contact the factory for details. Shaper can accommodate “Customer Supplied Fabric” (CSCC) orders. Please contact your representative for details and minimum quantities. Refer to pages 78/79

for detailed descriptions. All shades are hand-tucked except for paper and wood options.


BallastIntegral electronic HPF, multi-volt 120/277V (347V Canada), thermally protected with end-of-life circuitry to accommodate the specified lamp wattage. Contact factory for 347V IEM. Standard dimming ballasts: Advance Mark 7 (DMA7) or 10 (DMA10) or Lutron (DML).

Lamp/Socket18”: Two (2) 26W (GX24q-3) triple CFL lamps or two (2) 60W A-19 lamps.24”: Three (3) 32 (GX24q-3) triple CFL lamps or three (3) 60W A-19 lamps.30”: Three (3) 24W HO T5 linear fluorescent lamps or four (4) 60W A-19 lamps.Note: When specifying a dimming option, only Lutron is available. Specify (3) 24W HO T5 (109-30) lamping. CFL socket injection-molded plastic. INC socket fired ceramic rated for 660W-250V. Lamps furnished by others.

Installation109-P: Supplied with either a circle strap mounting canopy or bar strap that mounts to a 4” J-box or plaster ring. Integral safety cable provided. 109-S: Supplied with a universal circular strap for a standard 4” J-box or plaster ring. Integral safety cable provided.109-WMTA - Except 30”: Arm supplied with a universal circle strap pattern for 3 1/2" & 4" J- boxes and switch boxes. The arm attaches to a standard 1/2" stem via a coupler Integral safety cable provided. J-box to be framed and/or supported by building structure. Integral safety cable provided.Contractor to provide appropriate structural support for fixture weight. Refer to shaperlighting.com for installation sheets and additional drawings.

OptionsCFL Dimming Ballast - Advance - Except 30" (DMA7) or (DMA10) or Lutron (DML), Matte White Acrylic Top Cover - Except 109-S (TC), Sloped Ceiling Adaptor - 102-P only (SCA), Integral Emergency Battery (IEM), “Casual” Box Pleat (CBP), European “Mushroom” Pleat (EMP). Contact factory for NFP701 Fire Resistant or Stain Guard fabric coatings. Contact factory for multi-fixture pendant.



109 SERIESInterior Pendant & Surface LuminairesCube

��;��

�� <��

��<��

��8��<��

��;��

�� <��

��<��

��8��<��

�� ;��

�� <��

��< ��

��8��< ��

��;��

��<��

��<��

��8��<��

��;��

��<��

��<��

��8��<��

�� ;��

��<��

��< ��

��8��< ��

��8��<��

��8��<��

��8��< ��

109 Mounting 100 Series Fabriqué

109-24-P-1S-CFL/3/32-277V-SAL-AMS-36

shaperlighting.com 57109-30-P-1S-T5/3/24HO-120V-SN-CC-CBP-42

109-30-S-T5/3/24HO-120V-VDB58 shaperlighting.com

109-18-WMTA-CFL/2/26-277V-SC-SIW

109-30-P-1S-T5/3/24HO-120V-SAL-GFX-36



Kaffee und Kuchen Alexandria, VAPhotography: Andrea RuggFixture: 109-18-S-SDE-CBP

SERIES SIZE MOUNTING LAMP VOLTAGE FINISH SHADE MATERIAL OPTIONS110 25"

37"49"

W T5/2/14 (25”)T5/2/24 HO (25”)T5/2/21 (37”)T5/2/39 HO (37”)T5/2/28 (49")T5/2/54HO (49”)


(Motifs Only)NA, SAL, MW, BM, SM, SB, OBRS, SC, SCP, OCP, SN, PN, GNM or CC

SWH, SEG, CCT, CXH, SBG, GFX, CNK, APX, CCS, ABR, NLB, VDB, ABB, GSH, PPF, NGS, BZS, LAT, LBS, SIY, SIW, LCK, WHK, SDE, WCA, HTG, AMS, GHY, NFX or CSCC

DMA7, DMA10, DML, IEM, EMP, WRDSIS + EDT, WMT or SMO, MMRDL, MMRDT, MMRDS or TC


ORDERING EXAMPLE 110-25-W-T5/2/14-120V-SAL-SIW-WRDSIS-WMT

DescriptionThe 110 �� Round Cylinder features 29 shade materials, one Shade-in-a-Shade option and three Metal Motifs (Patent Pending).

Material/MountingCold-rolled steel and aluminum wire body, painted white. Supplied with matte white acrylic bottom diffuser, standard. Optional matte white acrylic top cover.Fabric Shades: 8” Solid cold-rolled painted steel frame construction. Fabric on heavy translucent white styrene. Optional Shade-in-a-Shade (WRDSIS): Solid cold-rolled steel construction with exposed metal painted white, silver or gold to match specified organza. Organza on heavy clear vinyl backing. Optional Metal Motifs (MMRDL, MMRDT or MMRDS): Solid aluminum or steel laser-cut construction with integral mounting tabs.

Finish (Motifs Only)Standard: Natural Aluminum (NA) .Premium: Matte White (MW), Bronze Metallic Paint (BM), Silver Metallic Paint (SM), Lacquered Satin Aluminum (SAL), Satin Brass (SB), Oxidized Brass (OBRS), Satin Chrome (SC), Satin Copper (SCP), Oxidized Copper (OCP), Satin Nickel (SN), Gun Metal (GNM) or Custom Color (CC).

Shade MaterialStandard: Silk White (SIW).Premium: Shantung White - 25” & 37” only (SWH), Shantung Eggshell (SEG), Chintz Chocolate (CCT), Chintz Onyx (CXH), Shantung Beige (SBG), Cinnamon Stick (CNK), Apex (APX), Criss-Cross (CCS), Glasgow Flax - 25” & 37” only (GFX), Paper Leaf - 25” & 37” only (PPF), Nutmeg Shimmer (NGS), Bronze Shimmer (BZS), Linen Alabaster - 25” & 37” only (LAT), Linen Biscuit - 28” & 48” only (LBS), Silk Ivory (SIY), White Krinkle -25” & 37” only (WHK), Sandstone (SDE), White Corona (WCA), Heather Grey (HTG), Aluminium Shimmer (AMS), Golden Honey - Vinyl Coated- 25” & 37” only (GHY), Natural Flax - Vinyl Coated - 25” & 37” only (NFX), Alabaster - Vinyl Coated - 25” & 37” only (ABR), Natural Bamboo (NLB) , Variegated Bamboo (VDB) or Amber Bamboo (ABB) or Customer Supplied Fabric (CSCC).Optional Shade-in-a-Shade (WRDSIS): Earth Dust (EDT), White Mist (WMT)or Silver Moon (SMO). Refer to pages 78/79 for detailed material descriptions. Many additional stock fabrics are available as a MOD, contact the factory for details. Shaper can accommodate “Customer Supplied Fabric” (CSCC) orders. Please contact your representative for details and minimum quantities. All shades are hand-tucked except for paper and wood options.


BallastIntegral electronic HPF, 120/277V (347V Canada), thermally protected with end-of-life circuitry to accommodate the specified lamp wattage 120/277V IEM & DM only. Contact factory for 347V DM. Standard dimming ballasts: Advance-HO Mark 10 (DMA10) or Lutron (DML). Contact factory for alternative DM ballasts.

Lamp/Socket25”: Two (2) 14W or 24W HO T5 linear fluorescent lamps.37”: Two (2) 21W or 39W HO T5 linear fluorescent lamps.49”: Two (2) 28W or 54W HO T5 linear fluorescent lamps.Note: When specifying the Advance dimming option, only Advance Mark 7 or 10 are available. Specify (2) 54W HO T5 (110-49-W) lamping. T5HO lamps are recommended for use with medium to dark materials.

InstallationSupplied with an integral universal circle strap for standard 4” J-box or plaster ring. Refer to specification sheets for additional drawings. Contractor to provide appropriate structural support for fixture weight. Refer to shaperlighting.com for installation sheets and additional drawings.

OptionsFL T5 Dimming Ballast: Advance Mark 10 (DMA10), Advance Mark 7 (DMA7), - Available with (2) 54WHO T5 (110-49-W) only or Lutron (DML). Matte White Acrylic Top Cover (TC), Integral Emergency Battery (IEM), Wall Round Shade-in-a-Shade (WRDSIS) + EDT, WMT or SMO, European “Mushroom Pleat” (EMP), Metal Motif Round Lune (MMRDL), Metal Motif Round Tangent (MMRDT), Metal Motif Round Salinon (MMRDS). Contact factory for NFP701 Fire Resistant or Stain Guard fabric coating.


ModificationsShaper’s skilled craftspeople with their depth of experience offer the designer the flexibility to modify standard Fabriqué Wall luminaires for project-specific solutions. Contact the factory regarding scale options, unique finishes, mounting, additional materials/colors or decorative detailing.

110 SERIESInterior Wall LuminairesRound Cylinder


�� <��

��<��

��<��

��<��

��<��

��<��

��= �� = ��=

��<��

��<��

110 Mounting

110-28-W-T5/2/24HO-120V-SC-BZS-MMRDS



110-49-W-T5/2/28W-277V-MB-SBG-MMRDT

62 shaperlighting.com 110-37-W-T5/2/39HO-120V-NGS-WRDSIS-EDT 110-25-W-T5/2/14-120V-SM-SDE-MMRDL

Coeur d'Alene Hills Executive SuitesCoeur d'Alene, ID

Photography: John SuttonFixture: 110-37-W-T5/2/39HO-120V-ABB

110-49-W-T5/2/54HO-120V-NLB-DMA10

110-25-W-T5/2/14-277V-BZS-WRDSIS-EDT



Kansas General Hospital - Patient Exam RoomKansas, MOPhotography: John SuttonFixture: 110-25-W-T5/2/14-120V-GHY64 shaperlighting.com

110-37-W-T5/2/21W-277V-AMS 110-37-W-T5/2/21W-120V-WCA 110-37-W-T5/2/39HO-120V-ABB

110-37-W-T5/2/39HO-277V-NGS110-37-W-T5/2/39HO-120V-SAL-NGS-MMRDL


110-25-W-T5/2/14-277V-BZS



SERIES SIZE MOUNTING LAMP VOLTAGE FINISH SHADE MATERIAL OPTIONS111 25"

37"49"

W T5/2/14 (25”)T5/2/24HO (25”)T5/2/21 (37”)T5/2/39HO (37”)T5/2/28 (49")T5/2/54HO (49”)


(Motifs Option Only)NA, SAL, MW, BM, SM, SB, OBRS, SC, SCP, OCP, SN, GNM or CC

SWH, SEG, CCT, CXH, SBG, GFX, CNK, APX, CCS, NLB, VDB, ABB, GSH, PPF, NGS, BZS, LAT, LBS, SIY, SIW, LCK, WHK, SDE, WCA, HTG, AMS, ABR, GHY, NFX or CSCC

DMA7, DMA10, DML, IEM, EMP, WSQSIS + EDT, WMT or SMO, MMSQM, MMSQC, MMSQR, MMSQT or TC


ORDERING EXAMPLE 111-37-W-T5/2/21-120V-SAL-SEG-MMSQC

DescriptionThe 111-W �� Square Cylinder features 29 shade materials, one Shade-in-a-Shade option and three Metal Motifs (Patent Pending).

Material/MountingCold-rolled steel and aluminum wire body, painted white. Supplied with matte white acrylic bottom diffuser, standard. Optional matte white acrylic top cover.Shades: Solid cold-rolled painted steel frame construction. Fabric on heavy translucent white styrene.Optional Shade-in-a-Shade (WSQSIS): Solid cold-rolled steel construction with exposed metal painted white, silver or gold to match specified organza. Organza adhered to heavy clear vinyl backing. Metal Motifs (MMSQM, MMSQC or MMSQR): Solid aluminum or steel laser cut construction with integral mounting tabs.

Finish (Motifs Only)Standard: Natural Aluminum (NA). Premium: Matte White (MW), Bronze Metallic Paint (BM), Silver Metallic Paint (SM), Lacquered Satin Aluminum (SAL), Satin Brass (SB), Oxidized Brass (OBRS), Satin Chrome (SC), Satin Copper (SCP), Oxidized Copper (OCP), Satin Nickel (SN), Gun Metal (GNM) or Custom Color (CC).

Shade MaterialStandard: Silk White (SIW).Premium: Shantung White - 25” & 37” only (SWH), Shantung Eggshell (SEG), Chintz Chocolate (CCT), Chintz Onyx (CXH), Shantung Beige (SBG), Cinnamon Stick (CNK), Apex (APX), Criss-Cross (CCS), Glasgow Flax - 25” & 37” only (GFX), Paper Leaf - 25” & 37” only (PPF), Nutmeg Shimmer (NGS), Bronze Shimmer (BZS), Linen Alabaster - 25” & 37” only (LAT), Linen Biscuit - 28” & 48” only (LBS), Silk Ivory (SIY), White Krinkle -25” & 37” only (WHK), Sandstone (SDE), White Corona (WCA), Heather Grey (HTG), Aluminium Shimmer (AMS), Golden Honey - Vinyl Coated- 25” & 37” only (GHY), Natural Flax - Vinyl Coated - 25” & 37” only (NFX), Alabaster - Vinyl Coated - 25” & 37” only (ABR), Natural Bamboo (NLB) , Variegated Bamboo (VDB) or Amber Bamboo (ABB) or Customer Supplied Fabric (CSCC).Optional Shade-in-a-Shade (WRDSIS): Earth Dust (EDT), White Mist (WMT)or Silver Moon (SMO). Refer to pages 78/79 for detailed material descriptions. Many additional stock fabrics are available as a MOD; contact the factory for details. Shaper can accommodate “Customer Supplied Fabric” (CSCC) orders. Please contact your representative for details and minimum quantities. All shades are hand-tucked except for paper and wood options.



Lamp/Socket25”: Two (2) 14W or 24W HO T5 linear fluorescent lamps.37”: Two (2) 21W or 39W HO T5 linear fluorescent lamps.49”: Two (2) 28W or 54W HO T5 linear fluorescent lamps.Note: When specifying the Advance dimming option, only Advance Mark 7 or 10 are available. Specify (2) 54W HO T5 (111-49-W) lamping. T5HO lamps are recommended for use with medium to dark materials.

InstallationSupplied with an integral universal circle strap for standard 4” J-box or plaster ring. Refer to specification sheets for additional drawings. Contractor to provide appropriate structural support for fixture weight. Refer to shaperlighting.com for installation sheets and additional drawings.

OptionsFL T5 Dimming Ballast: Advance Mark 10 (DMA10), Advance Mark 7 (DMA7), - Available with (2) 54WHO T5 (111-49-W) only or Lutron (DML). Matte White Acrylic Top Cover (TC), Integral Emergency Battery (IEM), Wall Square Shade-in-a-Shade (WSQSIS) + EDT, WMT or SMO, European “Mushroom Pleat” (EMP), Metal Motif Square Mondrian (MMSQM), Metal Motif Square Curvilinear (MMSQC), Metal Motif Square Rhombus (MMSQR), Contact factory for NFP701 Fire Resistant or Stain Guard fabric coatings.

Labels U.L. and C.U.L. approved. Interior applications only.

ModificationsShaper’s skilled craftspeople with their depth of experience offer the designer the flexibility to modify standard Fabriqué Wall luminaires for project-specific solutions. Contact the factory regarding scale options, unique finishes, mounting, additional materials/colors or decorative detailing.

111 SERIESInterior Wall LuminaireSquare Cylinder

�� <��

��<��

��=

��<��

��<��

�� =

��<��

��<��

��=

��<��

��<��

111 Mounting 100 Series

Fabriqué

111-25-W-T5/2/24HO-120V-SBG-WSQSIS-EDT



111-49-W-T5/2/28W-120V-SBG111-49-W-T5/2/28W-277V-SAL-AMS-MMSQM111-49-W-T5/2/54HO-120V-CNK


Aylesbury House HotelAugusta, ME

Photography: Emilio Rodriguez Fixture: 111-49-W-T5/2/54HO-120V-GNM-SBG-MMSQT

Fixture on the right is modified to "mirror" the fixture on the left.


70 shaperlighting.com 111-37W-T5/2/21W-277V-SIW-WSQSIS-EDT

111-25-W-T5/2/14W-277V-MW-SBG-MMSQR

111-25-W-T5/2/14W-120V-WCA-WSQSIS-WMT

Summerville Metro HotelCharleston, SC

Photography: John SuttonFixture:111-25-W-T5/2/24HO-120V-SBG-WSQSIS-EDT


111-49-W-T5/2/28W-277V-AMS-WSQSIS-WMT

111-25-W-T5/2/24WHO-120V-VDB

111-49-W-T5/2/28W-120V-BM-SBG-MMSQT


72 shaperlighting.com 111-49-W-T5/2/28W-277V-DP-AMS-MMSQM

111-37-W-T5/2/21W-120V-SIW


111-25-W-T5/2/14W-120V-GFX111-37-W-T5/2/21W-120V-BM-SEG-MMSQC


Boutique HotelSan Antonio, TXPhotography: John SuttonFixtures: 111-25-W-T5/2/14W-277V-WCA-WSQSIS-WMT


DESIGN STUDIO

EXPLORE YOUR DESIGN CONCEPTS WITH SHAPER’S

FABRIQUE SERIES

We have featured a few of the many MOD’s that we have

created utilizing elements from GEN I & GEN II to create signature

luminaires for specific projects. In addition, we have worked

closely with designers to create new designs. We are featuring

just a few of the many designs we have created for your inspiration!

We would love to help you develop your concept for custom

Motifs, modified or new Shade-in-Shade designs, custom paint and fabric colors, unique decorative

attachments and large scale luminaires. Please contact your local representative to discuss your signature concept today!

8"W X 10"H MIRROR

8 5/8"

"4/

1 3

"4/

3 0

1

SECTION A-A

1.25" TUBE (SN FINISH)

.75" TUBE (SN FINISH)

5-1/8" X 10" H SHANTUNG WHITE HAND TUCKED FABRIC SHADE

(1) F13DTT PIN LAMP(BY OTHERS)

(1) ONE-LAMP 13W 120V ELECTRONIC BALLAST

-1/2" X 2" DP. ANOPY

SN FINISH)

VIEWS FOR REFERENCENO SCALE



TECHNICAL DETAILSPendants

SLOPED CEILING ADAPTOR (SCA) Sloped Ceiling Adaptors are designed to be used for ceilings that slope more than 25°. The adaptors can be used with single stems or 1SAC with a sloped ceiling of up to 45°. The 101 requires a unique SCA design that is application based; refer to the specifica-tion sheet for drawings and additional information.

COLLECTOR BODY (CB) The Collector Body option is used for the 101 pendant with an overall suspension of 60” or more. The collector body transitions from the Double Stem (2S) to a single stem for extended hang heights.

OVERALL HANG HEIGHT (OA) Overall Hang Height measures from the ceiling to the lowest point of the fixture. Our standard overall hang height for most pendants is 24” (OA). Do not specify the stem length. Refer to the fixture specifi-cation pages for details.

TOP COVER OPTION (TC) Pendants can be specified with a Top Cover option in matte white acrylic. Refer to the specification sheets on shaperlighting.com for details and additional drawings.

PENDANT CANOPIESAll of our single stem pendant luminaires are provided standard with one of two different swivel mechanisms. The Self-Aligning Swivel offers up to 15° (total) adjustment. The Swivel Canopy offers up to 30° (total) adjustment.

101-SLOPED CEILING ADAPTOR

102-OVERALL HANG HEIGHT (OA)

BOTTOM OF FIXTURE

FINISHED CEILING

SPECIFY ASPART OF

CATALOGNUMBER

OVERALL (OA)HANG HEIGHT

STEM LENGTH

BODY

COLLECTOR BODY (CB)

J-BOX

TOP COVER OPTION (TC)

METAL FINISH GUIDE - STANDARD

Note: Refer to page 521 in the Shaper Architectural Catalog for Emergency Battery Pack - IEM & REM technical information and ordering details. Refer to shaperlighting.com icon legend for descriptions the icons used throughout this catalog.

Note: Refer to haloltg.com for Halo Track finishes - P, AH, SL & MB.

Self Aligning Swivel

17°17°


Visit shaperlighting.comFOR COMPLETE PHOTOMETRICS

Matte White Paint (MW) Silver Metallic Paint (SM) Bronze Metallic Paint (BM) Natural Aluminum (NA)

Lacquered Satin Aluminum (SAL) Satin Brass (SB) Polished Brass (PB) Oxidized Brass (OBRS)

Satin Chrome (SC) Polished Chrome (PC) Satin Copper (SCP) Polished Copper (PCP)

Oxidized Copper (OCP) Satin Nickel (SN) Polished Nickel (PN) Gun Metal (GNM)

METAL MOTIF GUIDE

Shaper's new family of Metal Motif's and Panels feature eight Patent Pending designs; four each for the Round and Square Cylinders in all sizes. The unique designs have a hardware free mechanical attachment and are laser cut. They are available in a wide variety of standard finishes as well as custom color to coordinate with a fabric of your choice! Contact the factory to create your own design or logo for project specfic applications.

106 - Round Cylinder

107 - Square Cylinder

106 Metal Panels

107 Metal Panels

110 - Round Cylinder

111 - Square Cylinder

Metal Motif Lune (MMRDL)

Metal Motif Lune (MMRDL)

Metal Panel Round Cylinder (MPRD)

Metal Panel Square Cylinder (MPSQ)

Metal Motif Mondrian (MMSQM)

Metal Motif Mondrian (MMSQM)

Metal MotifTangent (MMRDT)

Metal MotifTangent (MMRDT)*

Metal MotifCurvilinear (MMSQC)

Metal MotifCurvilinear (MMSQC)

Metal MotifSalinon (MMRDS)*

Metal MotifSalinon (MMRDS)

Metal MotifRhombus (MMSQS)

Metal MotifRhombus (MMSQR) shaperlighting.com 77

* Tangent also available with the 107 and 111 Series.

MATERIAL FINISH GUIDE - STANDARD

Silk White (SIW)Genuine silk, fine weave, delicate texture, with no

“slubs” Width: 54"

Silk Ivory (SIY)Genuine silk, fine weave,

delicate texture, with no “slubs” Width: 54"

Linen Alabaster (LAT)Elegant, small weave, no

“slubs” Width: 48"

Linen Biscuit (LBS)Smooth weave,

handkerchief linenWidth: 48"

Shantung White (SWH)Delicate linear weave with random “slubs”

Width: 48"

Shantung Eggshell (SEG)Delicate linear weave with random “slubs”

Width: 54"

Shantung Beige (SBG)Delicate linear weave with random “slubs”

Width: 54"

Aluminium Shimmer (AMS)

Light silver with a slight metallic sheen

Width: 54"

Heather Grey (HTG)Medium grey with a slight metallic sheen

Width: 54"

Nutmeg Shimmer (NGS)“Silk-like,” subtle

iridescent sheen and deeply colored

Width: 54"

Chintz Chocolate (CCT)Small weave

without “slubs”Width: 54"

Chintz Onyx (CXH)Small weave

without “slubs”Width: 54"

Casual “Box” Pleat (OBP)

Casually fluid box pleat, coupled with deliberate inconsistency of spacing and form creates interesting texture with varying depths of illumination. Adds subtle character to simple shapes.

European “Mushroom” Pleat (EMP)

Beautifully "stirred," tight pleat fabric that creates texture and depth. "Soft-back" white stretch lining underneath the specified fabric.

FSC Bamboo Veneers**

Beautiful, unique flat grain veneer with irregular graining and “knots.” Made from 100% rapidly renewable bamboo. A no VOC water based protective top coating is applied to the shade surface. Trimless, sanded edge.

Solid Fabrics

Close-Ups

Bronze Shimmer (BZS)“Silk-like,” subtle

iridescent sheen and deeply colored

Width: 54"


Note: Natural materials and textiles are subject to inconsistency in color/pattern, texture, shape and may vary from dye lots. They may also change appearance over time. Standard Metal and Material Finish Guides are graphic representations of the actual colors. Colors will differ between the monitor settings and variations may occur between the actual color and the images shown. Many materials appear differently when illuminated. As an example, the wood appears to be more amber when illuminated. It is recommended to view all samples illuminated prior to making a final selection. Please contact your representative for a color sample chip.


Alabaster (ABR)Tight white weave

with a vinyl coating on both sides of the

fabric to create a durable, sealed exterior. Can be cleaned with a

damp cloth Width: 48"

White Mist (WMT)*Slight metallic weave, silver sheer organza

on clear vinyl Width: 42"

Glasgow Flax (GFX)Off-white, tight

weave background with a random beige horizontal/vertical

patternWidth: 48"

Natural Flax (NFX)Tight off-white

weave with a vinyl coating on both sides

of the fabric to create a durable,

sealed exterior. Can be cleaned with a

damp cloth Width: 48"

White Krinkle (WHK)White paper with a random raised

decorative “crinkle” pattern

Width: 44"

Silver Moon (SMO)*Slight metallic weave, white sheer organza

on clear vinylWidth: 42"

White Corona (WCA)White translucent background with

raised, random, white embroidered circles

Width: 54"

Golden Honey (GHY)Tight light beige

weave with a vinyl coating on both sides

of the fabric to create a durable,

sealed exterior. Can be cleaned with a

damp clothWidth: 48"

Linen Chopsticks (LCK)

Off-white paper with raised decorative random threads

Width: 45"

Earth Dust (EDT)*Slight metallic weave,

bronze sheerorganza on clear vinyl

Width: 42"

Sandstone (SDE) Medium beige back-ground with small,

raised, random, light beige embroidered

“nibs” Width: 54"

Natural Bamboo (NLB) FSC** Certified,

Urea Formaldehyde-Free, blonde wood

Material Size: 4' x 8'

Paper Leaf (PPF)Whole and crushed

autumn/brown, birch type leaves contrasted against an off-white

backgroundWidth: 45"

White Mist (WMTR)White weave, resin

5' x 8' Sheet

Apex (APX)Formal tight weave, slight sheen with raised stitched “X”

patternWidth: 54"

Variegated Bamboo (VDB)

FSC** Certified, Urea Formaldehyde-Free, a mixture of

blonde and medium amber wood


Grass Cloth (GSH)Light-colored fine

weaveWidth: 36"

Silver Moon (SMOR)Silver weave, resin

4' x 8' Sheet

Criss-Cross (CCS)Milk chocolate slightly textured tight weave

with chocolate and wine colored raised diagonal

decorative barsWidth: 54"

Amber Bamboo (ABB) FSC** Certified,

Urea Formaldehyde-Free, medium amber wood


Earth Dust (EDTR)Bronze weave, resin

4' x 8' Sheet

Cinnamon Stick (CNK)

Cinnamon & olive tight weave, slight sheen with raised decorative bars

Width: 54"

Coated Fabrics Wood Veneers

Papers

Shade-in-a-Shade Organza Fabrics Metal Panel Resin Inserts

Patterned Fabrics

Note: Matching binding tape or coordinating fabric trim is provided on paper shades or 5/16" self-trim is provided on fabric 105 Series only. All other shades are "Hand- Tucked". Some materials have size limitations. Check the specification pages for size availability.

**Forest Stewardship Council’s (FSC) role is to bring together people, organizations and businesses of the Global South and North to develop consensus-based solutions that promote responsible stewardship of the world’s forests. Visit www.fsc.org for more details.

COOPER LIGHTING FAMILYHalo

Cooper Lighting-Metalux

Cooper Lighting-Lumark

Cooper Lighting-Sure-Lites

Neo-Ray

Corelite

Portfolio

Iris

IO

ShaperLumiére

Invue

McGraw-Edison

Fail-Safe

MWS

RSA

Ametrix

Shaper Lighting1141 Marina Way South

Richmond, California 94804

ph 510.234.2370

fax 510.234.2371

shaperlighting.com

Customer First Center1121 Highway 74 SouthPeachtree City, Georgia 30269ph 770.486.4800fax 770.486.4801

Domestic Facilities, USACranbury, New JerseyElk Grove Village, IllinoisIrving, TexasOntario, CaliforniaPeachtree City, Georgia

CanadaCooper Lighting5925 McLaughlin RoadMississauga, Ontario L5R 1B8ph 905.507.4000fax 905.568.7049

Domestic Facilities, CanadaCalgary, AlbertaChomedey, Laval, P.Q.

International Sales, USAPeachtree City, Georgia

CoverKöln Haus RestaurantYork, PAPhotography: Emilio RodriguezFixture: 110-37-W-SAL-AMS-MMRDL

Cooper Lighting Inc. All rights reserved. Printed in the USA. Specifications and dimensions subject to change without notice. ADS100744 9/2010Refer to shaperlighting.com for the most current Fabrique' specification sheets that feature the latest drawings, images, specifications and finishes.

REFER TO OUR OTHER CATALOGS FOR MORE SHAPER LUMINAIRES!

ARCHITECTURAL SOLUTIONS

Documents

· PDF fileshaperlighting.com 3 Hospitality Design & Lifestyle Inc. San Francisco, CA Photography: Paul Dyer Architect: Feldman Architecture, Inc. Fixture: 101-48-P