-
Mewat Engg. College (Wakf)
B. Tech 3rd Sem CE, 2nd sessional Test-2014
BUILDING CONSTRUCTION MATERIALS & DRAWING (CE-203F)
Time- 1 hours and 30 minutes Maximum Marks: 50
Note- Attempt any three questions in all. First question is
compulsory and select one question from
each section.
1 (a) States the Defects and causes of dampness. (2)
(b) What steps are taken to prevention of dampness. (2)
(c) Define classification of absorbers. (2)
(d) Write Classification of timber. (2)
(e) Write Basic constituents of paints. (2)
Section -C
2. Definition in detail about proportions of lime and cement
mortars. (20)
OR
3. Write in brief about the fire resistant construction and fire
protection requirements for buildings.
(20)
Section- D
4. Write in brief characteristics and types of varnishes.
(20)
OR
5. What steps need to be taken for prevention and seasoning of
stone. (20)
-
Mewat Engg. College (Wakf)
B. Tech 5th Sem CE, 2nd sessional Test-2014
WATER SUPPLY AND TREATMENT (CE-305F)
Time- 1 hours and 30 minutes Maximum Marks: 50
Note- Attempt any three questions in all. First question is
compulsory and select one question from
each section.
1 (a) What are Intake structures. (2)
(b) What are Pumping Systems and pumping stations. (2)
(c) Define Rising, Gravity system and Dual systems. (2)
(d) Write Layout of Distribution system. (2)
(e) Write Water Distribution Network and analysis of
distribution network. (2)
Section -C
2. Write about valves and appurtenances. (20)
OR
3. Write in brief about the pipe materials and pipe fitting.
(20)
Section- D
4. Write in brief about the Distribution Reservoir, functions
and determination of storage capacity.
(20)
OR
5. What steps need to be taken for leak detection, Maintenance,
Water supply in buildings and
plumbing. (20)
-
Mewat Engg. College (Wakf)
B. Tech 7th Sem CE, 2nd sessional Test-2014
Environmental pollution and control (CE-411F)
Time- 1 hours and 30 minutes Maximum Marks: 50
Note- Attempt any three questions in all. First question is
compulsory and select one question from
each section.
Section A & B
1 (a) What Air borne diseases and their control. (2)
(b) What are Environmental management techniques. (2)
(c) Define Rising, Gravity system and Dual systems. (2)
(d) Write about river pollution and control of water pollution.
(2)
(e) Write relation between Economics of environments. (2)
Section -C
2. Write about Environmental Consideration of ventilation, air
conditioning and illumination. (20)
OR
3. Write in brief about the Environmental Auditing-general
methods, audit process. (20)
Section- D
4. Write in brief about the Sample collection and sampling
devices. (20)
OR
5. What Environmental management system standards . (20)
