Click here to load reader
Upload
john-elmer-loretizo
View
215
Download
0
Embed Size (px)
DESCRIPTION
2d Cad guides
Citation preview
GUIDELINES OF CAD COMMAND DRAW TOOL BAR:
1. LINE command Type L - enter Specify first point: (pick on the drawing area) Specify next point: (pick on the drawing area) ( Ex. 4) enter
2.RAY command
Type RAY - enter Specify first point: (pick at the center of arc) Specify through point: (pick on the edge of a circle) enter
3.CONSTRUCTION LINE command Type XL - enter Specify a point or ( hor , angle, vert, bisect, offset) H - enter Pick on the drawing area
4.MULTILINE command
Type ML - enter Specify first point or (justification ,score ,style) sc - enter Enter mline scale (0.00) type the value - enter Specify first point or ( justification, scale, style ) j - enter Enter justification type (top , zero , bottom ) z - enter Pick first point or justification, scale, style ) Pick next point: Pick next point: Pick next point: Pick next point: c - enter
5. POLYLINE command :
Type PL - enter Specify first point: (pick on the drawing area) Specify next point: (arc, half width, length ,undo, width ) 5 Specify next point: (arc, close, half width, length ,undo, width ) A enter Specify end point of arc or (angle, close, line, radius, undo) 2 enter Specify end point of arc or (angle, close, line, radius, undo) L enter Specify next point: (arc, close, half width, length ,undo, width ) 5 enter Specify next point: (arc, close, half width, length ,undo, width ) A enter Specify end point of arc or (angle, close, line, radius, undo) CL enter
6.POLYGON command :
Type POL - enter Enter number of sides (0.00) type the sides enter Pick center of polygon or (edge) pick Enter an option (inscribed in circle, circumscribed about circle) enter Specify radius of circle type the value- enter
7. RECTANGLE command
Type REC - enter Pick first corner point of rectangle ( chamfer, elevation, fillet, thickness, width ) pickonthedrawingarea Specify another corner point or (Dimension) D enter Specify length o f rectangles ( 0.000) type the length enter Specify width of rectangles ( 0.000) type the width enter Pick anywhere on the drawing area ( to fixed your drawing)
8.ARC command Type A - enter Pick first point of an arc Pick second point of an arc Pick end point of an arc
9.CIRCLE command
Type C - enter Pick center point of circle Specify radius of a circle (diameter) D or R - enter type the value - enter
10. DONUT command
Type DO - enter Specify inside diameter of donut (0.00) .2 - enter Specify outside diameter of donut (0.00) 2 - enter Specify center of donut or (exit) pick on the drawing area
11.SPLINE command
Type SPL - enter Specify first point : pick on the drawing area Specify next point: pick on the drawing area Specify next point: pick on the drawing area- 3 times enter
12.)ELLIPSE command
Type EL enter Specify distance to other axis 1 Specify distance to other axis or (rotation) 2 enter
13.)HATCH command
Type H enter Swatch : pick Ansi, iso, predefined , custom ( pick the ansi)
Pick points ( pick internal points ) enter ok
14.) TEXT command Type T enter Specify first corner (pick on the drawing area) Specify opposite corner (pick on the drawing area) Change the font style into Romans Change the font height into .2 Type (UNNGOY KO!!!!) OK
15.)REGION command
Type REG enter Select objects enter
16.)DIVIDE command
type DIV enter Select objects to divide Enter the no. of segments or ( block) 5- enter
17.)MEASURE command
Type ME enter Select object to measure
Enter the length of segments or ( block ) 0.50- enter
Engr.JuicyCorderoValdueza