Embed Size (px)
Citation preview
CURRICULUM VITAE
PERSONAL DETAILS
Name : Ts. Dr. ROZZETA DOLAH CEng Gender : Female Nationality : Malaysia Tel : (Mobile) : +6 017-361 7855 (WhatsApp): +1 781 803 0902
(Office): +6 03 2615 4817 (Fax): +6 03 2180 5380 E-mail : [email protected] Website : https://people.utm.my/rozzeta/ http://micronanofluidics.mit.edu/people
https://www.linkedin.com/in/ts-dr-rozzeta-dolah-ceng-miet-91951b47/ Address : Department of Engineering, Razak Faculty of Technology and
Informatics, Level 5, Menara Razak, Universiti Teknologi Malaysia (UTM), Jalan Sultan Yahya Petra, 54100 Kuala Lumpur, Malaysia
Universiti Teknologi Malaysia (UTM) ID Staff : 11406 UTM Position : Senior Lecturer DS 52 UTM Employment date: 1 September 2009 - present Expertise : Renewable Energy, Quality Engineering, Taguchi Method,
Experimental Design, Nanotechnology
Scopus ID: 37121876400 Researcher ID: C-5672-2011 ORCID: 0000-0002-6808-6491 ACADEMIC QUALIFICATIONS 2017 – April 2019 : Postdoctoral Fellow at Massachusetts Institute of
Technology: MIT Department of Mechanical Engineering, Cambridge, Massachusetts, United States of America
2011 - 2014 : Ph.D. Mechanical Engineering Meiji University, Tokyo, Japan 2004 - 2006 : M.Eng. Mechanical Engineering (Advanced Manufacturing
Technology), Universiti Teknologi Malaysia 1999 – 2002 : B. Sc. (Hons) in Chemical Technology
Universiti Kebangsaan Malaysia 2002 – 2003 : Advanced Diploma in Industrial Automation
Selangor Human Resource Development Centre, Box Hill TAFE College, Australia
AWARD AND HONORS RECEIVED Awards/Achievement
i) 24 November 2010 – Anugerah Tokoh
Perdana 2018 awarded by the Malaysia’s Prime Minister Tun Dr. Mahathir Mohamed, USA in Perdana Scholar Award 2018 ceremony
ii) 25 June 2018 – MIT Data Science and Big
Data Analytics awarded by MIT xPRO with 1.8 Continuing Education Unit (CEU), MIT, Cambridge, USA
iii) Appointed as MINITAB Inc. Ambassador, a statistical software for quality engineering and tool for quantitative and qualitative data analysis, USA
iv) Black Belt Six Sigma awarded for process and production improvement and Data Scientist, Malaysia
v) MIT Kaufman Teaching Certificate Program by MIT Teaching and Learning Lab, Cambridge, USA
vi) Chartered Engineer, CEng bestowed by UK Engineering Council, United Kingdom
vii) Professional Technologist, Ts. Bestowed by Malaysia Board of Technologist (MBOT), Malaysia
viii) Best Paper Award for the presentation “On the Development of Measurement System using Parameter Design based on Peel Strength Measurement” at the 2nd International conference on Robust Quality Engineering (ICRQE), December 2014, Bangalore, India
ix) Best Paper Award for presentation “Optimization of the Paper Permeability Tester using Robust Design” at the International Conference on Robust Quality Engineering (ICRQE), August 2013, Malaysia
x) Citra Karisma Award by UTM for best performance in Ph.D. Graduate-On-Time, Malaysia
xi) Quality Academic Award by UTM faculty for Best Teaching Practice, Malaysia
PROFESSIONAL MEMBERSHIP / QUALIFICATIONS / RECOGNITION
i) Member, American Institute of Chemical Engineers, AIChE Membership No.: 9902919721, 2018
ii) Chartered Engineer, CEng (UK), Institution of Engineering and Technology (IET) September 2015
iii) Member, Robust Quality Engineering Society, Japan, Jun 2013 Membership No.: 15823
iv) Professional Technologist, Ts., Malaysia Board of Technologist (MBOT), May 2018
INDUSTRY EXPERIENCE Total 8 years of industry experience: ShinEtsu Handotai (S.E.H MALAYSIA SDN. BHD.), Malaysia 2003 - 2009 (Semiconductor – Silicon Wafer Manufacturing company) Position: Senior Process Engineer (Production Department) • Optimized production yield by reducing silicon wafer’s defects, input and output
parameter setting adjustment and rejects minimization
• Integrated all the quality related activities for defect’s prevention through process variation elimination. Necessary actions are taken to respond with customer’s complaint
• Performed daily manpower and production planning to ensure smooth running of production process
Achievements include: • 70% defect reduction through Black Belt Six Sigma program and Statistical Process
Control (SPC), thus minimized the production yield’s gap amongst SEH plants globally
• Lean manufacturing for SEH(M) by optimizing new machine’s layout through high efficiency work flow and overall equipment efficiency (OEE)
• Team leader for process and design FMEA, APQP, and PPAP, and reliability process
• Team leader for HAZOP/ HIRARC and risk assessment for chemical processes • Reduction of etchant usage consumption and environmental sludge waste by
increasing silicon content in MAE acid etchant from 10.5g/l to 12.0 g/l. Thus, less fresh etchant being dosed in which led to lower chemical cost and save up to USD 250 000/ year
• Alkaline etching process combination for two plants in Malaysia which led to cost reduction of USD 750 000 (collaboration with Zenkyo, Japan - etching machine maker)
• Merging production line for chemical etching process for chemical saving project • Plant internal auditor for ISO/ TS 16949:2002
Island & Peninsular (I&P) Group Sdn. Bhd., Malaysia 2009 - 2009 (Property/ Developer company) Position: Senior Executive (Quality Department) • Implemented Total Quality Management system into the organization and
subsidiaries companies • Conducted regular internal quality audit and provided consultancy advice • Ensured compliance of ISO guidelines, quality policies and procedure for all
divisions
Canon Opto Sdn. Bhd., Malaysia 2002 - 2002 (Camera manufacturing company) Position: Process Engineer • Implemented efficient way for lense cleaning process • Optimized the waste water treatment process for managing the lense sludge waste • Conducted the risk assessment analysis, HIRARC, and OSHE
ADMINISTRATIVE EXPERIENCE
Faculty Level
i) July 2019 – July 2021: Director of Genichi Taguchi Centre for Quality & Sustainability
ii) May 2019 – May 2021: Program Coordinator for Master of Science in Engineering Design (MSED) for Razak Faculty of Technology and Informatics
iii) December 2014 – December 2016: Marketing Manager for UTM Razak School of Engineering and Advanced Technology
iv) December 2014 – December 2016: Program Coordinator for Engineering Doctorate (EngDoc) for UTM Razak School of Engineering and Advanced Technology
University Level
i) May 2017 - Appointed as Editor for Journal of Robust Quality Engineering, Akademia Baru
OTHER EXPERIENCES NATIONAL COMMITTEE
i) Appointment as Chair for International Conference of Engineering Business Management (ICEBM) 2014 and 2015
INTERNATIONAL APPOINTMENT/COMMITTEE
i) Appointment as the President of Massachusetts Institute of Technology (MIT) Postdoctoral Association (MIT PDA) 1 September 2018
ii) Appointment as the Chair of Human Affairs, MIT iii) Appointment as the member of MIT Committee on Race and Diversity,
which is under Institute Committee of Equity appointed by MIT President Office
iv) Appointment as the Editorial Board Member for Journal “Inquest Journal of Robotics (IJR)” August 2017
v) Appointment as journal reviewer for Research in Engineering Design journal vi) Appointment as invited speaker for AIChE 2018 oral presentation and poster
CONSULTATION ACTIVITIES • MINITAB statistical software consultant for practitioner; engineers, industrialist,
academician, and students. Minitab shortcourse done at Kuala Lumpur open for public on 7 July 2017.
• Consultant for Tenaga Nasional Berhad (TNB) consultant (Malaysia’s electricity/power generation company) for industry research in the development of nano-device using nano-catalyst to enhance CO2 dissolution in marine microalgae and preventing CO2 emission and green house reduction
• Consultant for PROTON - Malaysia’s automotive/ car manufacturing industry, for statistical optimization approach for vehicle suspension using Taguchi method and Design of Experiments. PROTON Workshop on Multi-Regression Optimization (Vehicle Dynamic Responses) using Taguchi Method in Various Ride and Handling, done at PROTON on 9 Mac 2017
• National expert for Remanufacturing Industry under RMK-11, appointed by Ministry of International Trade and Industry (MITI) 2015
• Team leader in establishing a curriculum structure for Executive Diploma program with Malaysia Qualification Accreditation (MQA) 2010
• Engineering Doctorate Program and Master in Engineering Design Coordinator for graduate study administration
• Head of Marketing for the faculty to market faculty’s academic program and enrollment
UNIVERSITY’S RESEARCH PROJECT UNDERTAKEN – A: • Bio-Oil Upgrading As Vehicle Fuels Using Water/Oil Based Extraction, GUP Tier
II, August 2019 – July 2021 (grant no.: Q.K130000.2656.15J85; grant value RM 30 000 for 2 years)
• Renewable Energy Through Second Generation Catalytic Pyrolysis Conversion of Palm Oil (empty fruit bunch: EFB) Biomass into Jet Fuel A1- NanoMITe Research Consortium grant (LRGS) 2015-2020 (grant no.: LRGS Q.K130000.4L823; grant value RM 1 900 000 for 5 years from February 2015 – February 2020)
• Enhancement of Mahalanobis Taguchi System Based on Swarm Intelligence For
Multivariate Pattern Recognition (grant no. Q.K.130000.2540.15H43; grant value RM 40 000 from 1 October 2016 – 30 September 2018)
• Feasibility Study Aiming at Identifying the Potential Opportunities of Developing a Pioneer Underwater Ocean Turbines Power Plant on the One Fathom Bank (grant no. Q.K.130000.2540.15H31; grant value RM 40 000 from 1 October 2016 – 30 September 2018)
• Improvement Of Changeover Times Through Integrating Of SMED Method With
QFD Techniques for Semiconductor Industry (grant no. Q.K.130000.2540.15H70; grant value RM 40 000 from 1 October 2016 – 30 September 2018)
• Mercerisation treatment enhancement of kenaf fiber/ polypropylene composites
using robust design engineering method (grant no.: FRGS/1/2016/TK05/UTM/02/15; grant value RM 84 000 from 1 August 2016 - 31 July 2018)
• Optimization of Heat Treatment Effect on Microstructure and Mechanical Properties
of Ti-6Al-(1-3%) Fe Alloys using Taguchi Method for Aerospace Application (PAS grant Q.K130000.2740.01K37, grant value RM 20 000 from 1 November 2014 – 31 October 2015)
• Characterization of Mahalanobis -Taguchi System and Bees Algorithm for
Diagnosis and Forecasting In Multidimensional System (grant no. FRGS/ R.K 130000.7840.4F535; grant value RM 52 000 from 1 July 2014 – 31 December 2015
CONTRACT RESEARCH PROJECT AWARDED BY TNB RESEARCH SDN BHD - B:
i) Rozzeta Dolah et al. Development and Testing of a Prototype Device using nano-catalyst to enhance CO2 dissolution in marine microalgae and preventing CO2 emission and green house reduction. The budget agreed RM 400 000. Patent of the nanodevice is in progress (Contract research no.: TNBR/C08/2016; grant value USD 90,000 from December 2015 - 31 March 2016)
TOTAL Research Grant (RM A + B): RM 2 582 000 (Ringgit Malaysia Two Million Five Hundred Eighty Two Thousands)
TOP-DOWN LONG TERM RESEARCH GRANT SCHEME (LRGS) RESEARCH PROJECT:
i) Renewable Energy Through Second Generation Catalytic Pyrolysis Conversion of Palm Oil (empty fruit bunch: EFB) Biomass into Jet Fuel
A1- NanoMITe Research Consortium grant (LRGS) 2015-2019 (grant no.: LRGS Q.K130000.4L823; grant value RM 1900 000 for 5 years from 2015 till 2019
PATENT FILED/DISCLOSURE
i) Nanotier Device to Enhance CO2 Dissolution Rate in Microalgae Culture – Industry patent with TNB, file patent no. PI 2017700590
ii) Rozzeta Dolah, Syuhaida Ismail, Khairur Rijal Jamaludin, “F-N-C-O Measurement System Design for Etching Process Robustness”, ref. no. IP/PT/2016/1991
TEACHING ACTIVITIES
Semester Sem Subject Code
Subject Credit Hour
Total
2010/2011 1 SME 1413 Thermodinamic I 3 46 2010/2011 1 SME 1203 Static 3 46 2015/2016 1 URSP 0013 Research
Methodology 3 32
2015/2016 2 SMJP 4313 Design of Experiment
3 46
2015/2016 2 MDE 1523 Quality Management and
Techniques
3 32
2016/2017 1 ERSA 1243 Current Topics in Total Quality Management
3 32
2015/2016 2 FRSB 2273 Logistic and Supply Chain Management
3 32
2015/2016 2 FRSB 1013 Process and Quality
Improvement
3 32
2019/2020 2 UFS 1133 Entrepreneurship and Supervisory
Roles
3 32
2019/2020 1 ERSA 1113 Current Topics in Productions and
3 32
Operations Management
SUPERVISION
PhD Students:
Year from
No. Name Status Title Roles of Supervision
2019 1 Osama Mohamed Salih (PRS153018)
Ongoing 2019 -
Model of Implementing
Business Excellence in Micro Nonprofit Organizations in
Saudi Arabia
Main Supervisor
2014 2 Zuli’zam bin Rashid (PD103107) Graduated
Ergonomic Design Parameters for Malaysian Car Driver Seating Position
Main Supervisor
2014 3 Mohamed Shamaun bin Yushak (PD123007) Graduated
Management of Resistance to Change using Lean Principles in Transforming a Shipyard Operation
Main Supervisor
2013 4 Faizir bin Ramlie (PD133007) Graduated
Characterization of Bees Algorithm into the Mahalanobis Taguchi System for Classification
Co-Supervisor
2017 5 Haryanti binti Yahaya (PRS163008) Ongoing
2017 -
Conversion of Palm Oil Empty Fruit Bunch using Second Generation Pyrolysis into Production of Aviation Kerosene
Co-Supervisor
2015 6 Badli Shah bin Mohd Yusoff
Ongoing 2016 -
OEM Analysis for Remanufacturing
Co-Supervisor
MSc. / MEng Students: Year No. Name Status Title Type Roles of
Supervision 2017 1 Ainur Adliana
binti Saleh (MMJ153028)
Ongoing 2017 -
Taguchi Optimisation of
Squalene Production
using Chlorella Sorokiniana UTEX 1230 (NIES 2169)
Reseach Co-Supervisor
2016 2 Fadzil Adly bin Ishak
Graduated
Lean Application for Shortest Lead-
Time in Composite
Repair Shop
Taught Course
Main Supervisor
2016 3 Afham bin Abdul
Rahman (MRS141002) Graduated
Safety Culture in Royal
Malaysian Air Force
(RMAF)’s in Hangar
Tought Course
Main Supervisor
2016 4 Abd Fatah bin Mohd Zaini
Graduated
Risk Assessment
Onboard Royal Malaysian Navy Fast
Attack Craft (Missiles)
Taught Course
Main Supervisor
2015 5 Annuar bin Ismail Graduated
Optimization of Ball Placement Tool for Flip-
Taught Course
Main Supervisor
Chip-Ball-Grid-Array Package using Robust
Design Engineering in Semiconductor
Industry 2015 6 Charis
Kunsuwan A/L Prak Sit
Graduated
Development of System Tools for
Engineering Lot
Management in Test
Development Engineering of Semiconductor
Industry
Taught Course
Main Supervisor
2015 7 Yeoh Chin Joo
Graduated
Improvement of Electronic
Contract Manufacturing
Quality Management if Printing Circuit
Board Assembly
Taught Course
Main Supervisor
2015 8 Amir Hamzah bin
Baharuddin (ID: MRS 141027) Graduated
An Assessment on Airborne
Maritime Situation Control System
(AMASCOS) in Military Aircraft
Taught Course
Main Supervisor
2015 9 Mohd Razif bin Abdul Rashid Graduated
Kajian Penilaian
Risiko Terhadap
Taught Course
Main Supervisor
Proses Fabrikasi
Pengandung Tekanan Di
Kolej Kemahiran Tinggi Mara Kemaman
Executive Diploma students: Year No. Name Status Title Type Roles of
Supervision 2016 1 Mohd
Ibrahim bin Mazni Graduated
Machine Operation Safety
at Assembly Shop in Perodua Manufacturing
Sdn. Bhd.
Taught Course
Main Supervisor
2019 2 Denisaswindra Bin Raduan
Ongoing 2019 -
Improvement on Management of Building Facility Effectiveness
Taught Course
Main Supervisor
2019 3 Bahrul Bin Basri Ongoing
2019 -
Computerize Maintenance Management
System
Taught Course
Main Supervisor
2019 4 Mohd Rizal Bin Sidik Ongoing
2019 -
Electricity Saving in a Commercial
Building
Taught Course
Main Supervisor
2019 5 Wan Mohd Fadly
Shahrumnizam
Ongoing 2019 -
Gas Detector Lab Procedure
Taught Course
Main Supervisor
Total number of students’ supervision: 20 students
POSTGRADUATE EXAMINATION /VIVA
UTM STUDENTS/VIVA
i) PhD Assistant Chairman for viva Muhammad Noman Malik, 2015, the thesis entitled “Human Values Identification and Assessment Tools Development for Total Quality Management context”
EXAMINER
1. PhD Engineering Doctorate: i) 27 Februari 2015 Engineering Doctorate Colloquium, UTM
2. Master (MEBM):
ii) 6 Jun 2015 Master in Engineering Business Colloquium, UTM
PUBLICATIONS In Submission process: [a] Rozzeta Dolah, Rohit Karnik, Halimaton Hamdan, “A Review on Bio-oil from Oil Palm Empty Fruit Bunch (EFB): Current State, Potential, Barriers and Way Forward,” Renewable and Sustainable Energy Review [b] Haryanti Yahaya, Rozzeta Dolah, Norsahika Mohd Basir, Rohit Karnik, and Halimaton Hamdan, “Conversion of Empty Fruit Bunch Biomass Using Catalytic Fast-Pyrolysis Process for Bio-Oil into Jet Bio-Fuel,” Nanomaterials and Nanotechnology
JOURNAL ISI Journal (Web of Science): [1] Rashid, Z., Bakar, N., Dolah, R., and Ghazilla, R., "Comparison Study of Malaysian Driver Seating Position in SAEJ1517 Accommodation Model," SAE Int. J. Passeng. Cars - Mech. Syst. 12(2) (2019) https://doi.org/10.4271/06-12-02-0006 [2] Mohamed Shamaun Yushak, Rozzeta Dolah, Nooh Abu Bakar, “Lean Principles Reduces Resistance to Change in Transforming a Shipyard Operations,” International Journal of Business and Society, Vol. 19 S2 (2018) pp. 274-286
[3] Mohd Ikhwan Ibrahim, Mohamad Zaki Hassan, Rozzeta Dolah, Mohd Zuhri Mohamed Yusoff, Mohd Sapuan Salit, “Tensile Behaviour for Mercerization of Single Kenaf Fiber,” Malaysian Journal of Fundamental and Applied Sciences, Vol.14, no. 4 (2018) pp. 78-80
[4] Annuar Ismail, Rozzeta Dolah, Zenichi Miyagi,“Factors Identificationon Optimization of Ball Placement Tool for Flip-Chip-Ball-Grid Array product using Taguchi Method,” Jurnal Teknologi (Science & Engineering), Vol.72, No. 1 (2016) pp. 175-179
[5] Dolah, Rozzeta and Miyagi, Zenichi, “Effect of Peel Side on Optimum Condition for MeasuringFlexible Film Peel Strength in T-Peel Adhesion Test,” Journal of Testing
and Evaluation, Vol. 42, No. 1 (2014) pp. 1–13, doi:10.1520/JTE20120342. ISSN 0090-3973
SCOPUS Journal : [6] Rashid, Z., Bakar, N., Dolah, R., and Ghazilla, R., "Comparison Study of Malaysian Driver Seating Position in SAEJ1517 Accommodation Model," SAE Int. J. Passeng. Cars - Mech. Syst. 12(2) (2019) https://doi.org/10.4271/06-12-02-0006
[7] Mohd Ikhwan Ibrahim, Mohamad Zaki Hassan, Rozzeta Dolah, Mohd Zuhri Mohamed Yusoff, Mohd Sapuan Salit, “Tensile Behaviour for Mercerization of Single Kenaf Fiber,” Malaysian Journal of Fundamental and Applied Sciences, Vol.14, no. 4 (2018) pp. 78-80
[8] Fadzil Adly Ishak, Muhd Khudri Johari, Rozzeta Dolah, “A Case Study of LEAN Application for Shortest Lead Time in Composite Repair Shop,” International Journal of Engineering and Technology, Vol. 7, Issue 4.13 (2018) pp. 112-119
[9] Mohamed Shamaun Yushak, Rozzeta Dolah, Nooh Abu Bakar, “Lean Principles Reduces Resistance to Change in Transforming a Shipyard Operations,” International Journal of Business and Society, Vol. 19 S2 (2018) pp. 274-286
[10] Haryanti Yahaya, Halimaton Hamdan, Rozzeta Dolah, Nazlan Muhid, Khair Azim Rashid, Sulaiman Bakhtiar Rashidi. “Catalytic Fast-Pyrolysis Process Design and Equipment Setup for Converting Palm Oil Empty Fruit Bunch Biomass to Bio Oil," Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Vol. 32, Issue 1 (2017) pp. 1-8
[11] Faizir Ramlie, Khairur Rijal Jamaludin, Rozzeta Dolah, Wan Zuki Azman Wan
Muhamad, “Optimal Feature Selection of Taguchi Character Recognition in the
Mahalanobis-Taguchi System using Bees Algorithm,” Global Journal of Pure and Applied Mathematics, ISSN 0973-1768 Volume 12, Number 3 (2016) pp. 2651–2671
[12] Annuar Ismail, Rozzeta Dolah, Zenichi Miyagi,“Factors Identificationon Optimization of Ball Placement Tool for Flip-Chip-Ball-Grid Array product using Taguchi Method,” Jurnal Teknologi (Science & Engineering), Vol.72, No. 1 (2016) pp. 175-179
[13] Watanabe, K., Miyagi, Z., Dolah, R., Takahashi, K., “Optimization of the paper permeability tester using Robust design,” Jurnal Teknologi (Science & Engineering), Vol. 68, No. 4 (2014) pp. 91-96 [14] Dolah, R., Miyagi, Z., Bergman, B., “Outliers effect in measurement data for T-peel adhesion test using Robust parameter design,” Jurnal Teknologi (Science & Engineering), Vol. 68, No. 4 (2014) pp. 77-81
[15] Dolah, Rozzeta and Miyagi, Zenichi, “Effect of Peel Side on Optimum Condition for MeasuringFlexible Film Peel Strength in T-Peel Adhesion Test,” Journal of Testing and Evaluation, Vol. 42, No. 1 (2014) pp. 1–13, doi:10.1520/JTE20120342. ISSN 0090-3973
[16] Rozzeta Dolah, Hamidon Musa, Astuty Amrin, “Etching Performance Improvement
on Semiconductor Silicon Wafers with Redesigned Etching Drum,” Jurnal Teknologi (Science & Engineering), Vol. 55 (Mei 2011) pp. 53-65
NON INDEXED Journal :
[17] Badli Shah Mohd Yusoff, Khairur Rijal Jamaludin, Rozetta Dollah, “Reverse Logistics End of Life Products Acquisition and Sorting,” International Journal of Industrial and Manufacturing Engineering Vol:4, No:5, 2017
[18] Mohamad Ikhwan Ibrahim, Rozzeta Dolah, Mohd Zuhri Mohamed Yusoff, Mohd
Sapuan Salit and Mohamad Zaki Hassan, “Chemical Treatment Evaluation of Tensile Properties for Single Kenaf Fiber,” Journal of Advanced Research in Applied Mechanics, Vol.32, Issue 1, 2017, pp. 9-14
[19] R. Dolah, Z. Miyagi, K. Tatebayashi. “Quality Engineering Implementation in an Organization: A Brief Finding in QE Methodology,” Int. Journal of Management and
Production Engineering Review, Vol.3, No. 4, Dec. 2012: pp.26-34 H INDEX : 3 Citation: 38
PROCEEDINGS/CONFERENCE [1] Haryanti Yahaya, Rozzeta Dolah, Norsahika Mohd Basir, Rohit Karnik, Halimaton Hamdan,” Conversion of Empty Fruit Bunch Biomass using Catalytic Fast-Pyrolysis Process for the Production of Bio-Oil and Jet Biofuel” NanoMITe Annual Symposium & Nanotechnology Malaysia Annual Symposium 2019 (NanoSym 2019), Putrajaya, Malaysia, 21-22 August 2019 [2] Rozzeta Dolah, Rohit Karnik, Halimaton Hamdan, “Upgrading of Bio Oil as Transportation Fuel using Water/ Oil Based Exctraction” International Conference of 18th American Institute of Chemical Engineers - AIChE 2018, Pittsburgh, Pensylvania, United States of America, 31 October – 4 November 2018 [3] Rozzeta Dolah, Halimaton Hamdan, Haryanti Yahaya, Nazlan Muhid, Khair Azim Rashid, Sulaiman Bakhtiar Rashidi, “Fast Pyrolysis of Oil Palm Empty Fruit Bunch (EFB) for Bio Oil Production” International Conference of 18th American Institute of Chemical Engineers - AIChE 2018, Pittsburgh, Pensylvania, United States of America, 31 October – 4 November 2018 [4] Haryanti Yahaya, Halimaton Hamdan, Rozzeta Dolah, Nazlan Muhid, Khair Azim Rashid, Sulaiman Bakhtiar Rashidi. “Fast-Pyrolysis Process Design and Equipment Setup for Converting Oil Palm Empty Fruit Bunch Biomass to Bio Oil”.2nd International Mechanical Engineering conference - IMEW 2017, Kuala Lumpur, Malaysia.
[5] Haryanti Yahaya, Rozzeta Dolah, Nazlan Muhid, Khair Azim Rashid, Sulaiman Bakhtiar Rashidi, Halimaton Hamdan. "Pilot-Scale Catalytic Fast-Pyrolysis Process of Producing Bio Oil from Empty Fruit Bunch Biomass," NanoMITe Annual Symposium 2017 (NMAS2017), UPM Serdang, Malaysia, 14-15 November 2017
[6] Rozzeta Dolah, Halimaton Hamdan, Haryanti Yahaya, Nazlan Muhid, Khair Azim
Rashid, Sulaiman Bakhtiar Rashidi, “Optimization Of Zeolitic Nano-Material Device To Increase Co2 Dissolution In Marine Microalgae Culture” 3rd International Conference on Robust Quality Engineering, Bali, Indonesia 2 – 3 August 2016
[7] Rozzeta Dolah, Halimaton Hamdan, Nazlan Muhid, Haryanti Yahaya, Khair Azim
Rashidi, Sulaiman Bakhtiar Rashidi, “Second Generation Catalytic Pyrolysis of Oil Palm Empty Fruit Bunches into Bio Oil”, NanoMITe Annual Symposium (NMAS 2016), Malaysia, 28 Sept. 2016
[8] A.N.A. Fakrullah, T.Abd.Rahman, R. Dolah, U.S.Haron,"Analysis on the Band Plans for IMT Systems in 698-960 MHz", Journal of Applied Mechanics and Materials,Vol 735, pp.311-315, Feb.2015
[9] R. Dolah, Z.Miyagi. “On the Development of Measurement System using Parameter Design”, 2nd International Conference on Robust Quality Engineering, Malaysia,15-17 December 2014
[10] R.Dolah, Z.Miyagi, B.Bergman.“Ouliers Effect in Measurement Data for T-Peel
Adhesion Test using Robust Parameter Design”,1st International Conference on Robust Quality Engineering, Malaysia,24-25April 2013, pp.41-45
[11] K. Watanabe, Z. Miyagi, R. Dolah, K.Takahashi.2013.Evaluation Method of Uncertainty in the Paper Permeability Tester. International Symposiumon Mechanics, Aerospace, and Informatics Engineering ISMAI. Japan.
[12] K. Watanabe, Z. Miyagi, R. Dolah, K. Takahashi. 2013. Evaluation of Uncertainty Method with Interaction in Paper Permeability Tester. 7thInternationalSymposiumon Mechanics, Aerospace, and Informatics Engineering ISMAI. Korea.
[13] R. Dolah, Z. Miyagi,“How Quality Engineering in Japan Affects Global Product Performance”, Malaysia-JapanAcademic ScholarConference, Tokyo, Japan, 8-9
November 2013, pp.1-10.
[14] Tadaaki Morita, Rozzeta Dolah, Zenichi Miyagi. 2013. Optimization of Experimental Condition for Raman Spectroscopic Analysis of Plastic Property.International Symposium on Mechanics, Aerospace, and Informatics Engineering ISMAI. Japan.
[15] Ryo Konno, Rozzeta Dolah, Zenichi Miyagi. 2013.Development of High Resolution Test Apparatus using Piezo Actuator for Evaluation of Shear Property of Adhesive. International Symposium on Mechanics, Aerospace, and Informatics Engineering ISMAI. Japan.
[16] M. Hoshino, Z. Miyagi, Rozzeta Dolah. 2013. Performance Improvement of Viscoelastic Device and Properties of Characteristic Evaluation of Adhesive. International Symposium on Mechanics, Aerospace, and Informatics Engineering ISMAI. Korea.
[17] R.Dolah, Z.Miyagi, K.Tatebayashi.“Quality Engineering Implementation in an Organization”,15th QMOD conference, Quality Management and Operational
Development, Poland, 5-7 September 2012, pp.470-482. [18] Rozzeta Dolah, Zenichi Miyagi. “Multiple Noise Strategy in Robust Parameter
Design for Adhesion Test”. 20th Quality Engineering Society Conference (QES), Japan, 28-29 June 2012, pp.230-233.
[19] Rozzeta Dolah, Masato Matsuda, Zen’ichi Miyagi. “Optimization of Peel Test Evaluation for Aluminium-Poly Ethylene Terephthalate (Al-PET) Packaging Film”. 4th Asian Conference on Adhesion (ACA), Korea, Sept.25-27, 2011, pp.65-69
[20] Rozzeta Dolah, Hamidon Musa, Astuty Amrin. “Optimization of an Isotropic Etching process on Silicon Wafer”. 34th IEEE/CPMT International Electronic Manufacturing Technology Symposium (IEMT), Melaka, Malaysia, 30 Nov– 2 Dec 2010, pp.1-5 INTERNATIONAL COLLABORATION
A. Seminars/ Short courses as Invited Speaker; done at Massachusetts Institute of Technology, MIT, Cambridge, United States of America (USA) and around Boston area:
1. Technical seminar on Theory vs. Practise Challenges: facing Industrial Applications of Robust Design for Measurements, Northeastern University, Boston, USA
https://news.utm.my/2018/04/technical-seminar-on-theory-vs-practice-challenges-facing-industrial-applications-of-robust-design-for-measurements/ 2. Short course on Minitab Statistical Software: Experimental Designs for Robust Product/
Prcess Optimization – Reveals the Truth of Experimental Design, Building 14N-132, 25 January 2018, Massachusetts Institute of Technology MIT, Cambridge, USA
https://calendar.mit.edu/event/short_course_minitab_statistical_software#.Wm1oeq2ZPUo 3. Short course on Minitab Statistical Software: Experimental Designs for Taguchi Method
for Robust Product/ Prcess Optimization, GIS Lab, Rotch Library, 31 January 2019, Massachusetts Institute of Technology MIT, Cambridge, USA
https://news.utm.my/2018/02/short-course-on-minitab-statistical-software-experimental-designs-for-robust-product-process-optimization/ https://calendar.mit.edu/event/short_course_on_minitab_statistical_software_experimental_designs_for_robust_productprocess_optimization#.XHN2bpNKhp8
4. Lecture Talk on Variation Measurement and Improvement in Industry Engineering Application, MIT Department of Engineering, 17 October 2017 Massachusetts Institute of Technology MIT, Cambridge, USA
https://news.utm.my/2017/10/talk-by-dr-rozzeta-dolah-at-massachusetts-institute-of-technology-mit-usa-on-variation-measurement-and-improvement-in-industry-engineering-application/ 5. Workshop on Uncertainty Design and Reliabiltiy, 15 March 2017, Meiji University,
Tokyo, Japan
6. Meet and Greet The Honourable MALAYSIA PRIME MINISTER Tun Dr. Mahathir Mohamad, Mandarin Oriental New York, USA, 28 September 2019 https://news.utm.my/2018/10/an-evening-to-remember-with-the-father-of-the-nation-a-utm-story/
7. Workshop with Asia Professional Education Network - APEN Japan: Connectivity of SME’s between Malaysia and Japan on 2 March 2015. 14 Small-Medium Enterprise (SME) from Japan and 14 SME from Malaysia are connected in this workshop.
8. Massachusetts Institute of Technology MIT Data Science and Big Data Analytics awarded on 25 June 2018 by MIT xPRO with 1.8 Continuing Education Unit (CEU), MIT, Cambridge, USA
9. Massachusetts Institute of Technology MIT Kaufman Teaching Certificate Program awarded on June 2018 by MIT Teaching and Learning Lab, Cambridge, USA
B. Appointed as the Ambassador of statistical software’s Minitab® Inc. USA and involves in its blog and website:
http://blog.minitab.com/blog/a-quality-career-dr-rozzeta-dolah-part-1 http://blog.minitab.com/blog/a-quality-career-dr-rozzeta-dolah-part-2 C. Newspaper article in The Star newspaper on Japan Look East Policy:
https://www.thestar.com.my/news/nation/2016/03/05/look-east-policy-helped-broaden-her-perspective/ D. Television media, interviewed by Radio Televisyen Malaysia – RTM) at Foreign
Press Center (FPC), Washington D.C, United States of America:
https://myklik.rtm.gov.my/berkala/Xpresi/Wanita_&_STEM_(20_April_2019) https://myklik.rtm.gov.my/berkala/Xpresi/GEN_STEM_(27_April_2019) https://www.facebook.com/watch/?v=1286849104787694
https://my.usembassy.gov/xpresi-wanita-stem-042919/ https://www.facebook.com/usembassykl/posts/wanita-stem-women-stem-is-an-exclusive-documentary-program-produced-by-rtm-radio/10157087860284847/
E. Renewable Energy Symposium 2019: Education Malaysia Embassy at Washington D.C, MIT and US East Coast Presidential Council (US EPIC): Invited Speaker: Biomass Conversion into Biofuels & Current Advancement of Renewable Energy in Malaysia. This event is co-organized with Education Malaysia Washington DC, USA.
- The International Symposium on Renewable Energy held on 16 February 2019 at Massachusetts Institute of Technology, MIT Stata Centre https://www.facebook.com/events/massachusetts-institute-of-technology-mit/epic-x-mit-renewable-energy-symposium/224405311846208/ https://www.facebook.com/events/224405311846208/permalink/233940954225977/
F. Leading the Research Collaboration Meeting on 27 March – 5 April 2019
Between Imperial College London (ICL), MIT And Universiti Teknologi Malaysia (UTM) on Renewable Energy Research for 4 Countries – Malaysia, UK, and USA with emphasis of Taguchi Method from Japan
- The meeting took place at IMPERIAL COLLEGE LONDON (ICL), UNITED KINGDOM: involving Centre For Environmental Policy CEP (led by Dr. Jeremy Woods), Faculty of Natural Sciences (led by Prof. Mimi Hi) and Faculty of Chemical Engineering (led by Prof. Klaus Hellgardt)
G. Media and Society Connection:
- NAMSA Tokoh Perdana sharing session: Youtube channel for NAMSA (National Assembly of Malaysians Student in America) Career Webinar Series https://www.youtube.com/watch?v=u59S6ASCkHo
- COMMS Sharing session: Youtube channel for COMMS Colloquium (Council of Malaysian Midwest Students) in USA on the topic of “Building an Interconnected Network between Malaysian Postgrads and Postdocs in the United States of America:
https://youtu.be/0GSPU91FlrU
H. International Leadership:
1. President of Massachusetts Institute of Technology MIT Postdoctoral
Association (MIT PDA) https://news.utm.my/2018/09/universiti-teknologi-malaysia-senior-lecturer-becomes-malaysias-first-president-of-mit-postdoctoral-association/ https://pda.mit.edu/mit-pda-president-message-to-all-postd
2. Member of the COMMITTEE ON RACE AND DIVERSITY (CRD), with the
Institute Community and Equity Officer (ICEO) by Massachusetts Institute of Technology, MIT Committee on Race and Diversity (CRD)/ Office of The MIT President effective from 22 December 2017 http://diversity.mit.edu/
3. Chair of Human Affairs in MIT Postdoctoral Association (MIT PDA) https://pda.mit.edu/
LEADERSHIP, SYNERGISTIC ACTIVITIES AND CONTRIBUTION TO SOCIETY
• President of MIT Postdoctoral Association (MIT PDA) 2018/2019 • Chair of MIT Postdoctoral Association for Human Affairs 2017/2018 • As key person to connect MIT Energy Initiative (MITei) research between MIT with
Malaysia’s government ministries and industries in MIT trip to Malaysia on August 2018: - Minstry of Energy, Technology, Science, Climate Change and Environment
(MESTECC) with YBhg. Minister Yeo Bee Yin - Ministry of Water, Land and Natural Resources (KATS) with YBhg. Minister
Dr. Xavier Jayakumar - Ministry of Education (MOE) with YBhg. Prof. Datin Paduka Ir. Dr. Siti
Hamisah - Industry bodies: Proton, Petronas, and TNB
• Member of MIT Women’s League 2017
• NAMSA Tokoh Perdana sharing session: Youtube channel for NAMSA (National Assembly of Malaysians Student in America) Career Webinar Series https://www.youtube.com/watch?v=u59S6ASCkHo
• COMMS Sharing session: Youtube channel for COMMS Colloquium (Council of Malaysian Midwest Students) in USA on the topic of “Building an Interconnected Network between Malaysian Postgrads and Postdocs in the United States of America:
https://youtu.be/0GSPU91FlrU
• Look East Policy Seminar– Team LEP2013, co-joint with Malaysia Japan Academic Scholar Conference,10 November2013, Tokyo, Japan.
• Miyagi Prefecture Summer Camp on15-16 August 2013, Japan. • Miyagi Prefecture Autumn Camp on in helping Fukushima Disaster victim, 5-6
October 2013, Japan • Organizing Committee for Malaysia-Japan Academic Scholar Seminar
MJASS2012, Waseda University, Tokyo,Japan • Nissan Manufacturing Plant Seminar on Quality and Productivity on January2013,
Oppama plant, Kanagawa-ken, Japan • Global Leadership Outreach Program on November 2012 organized by Higher
Education • Leadership Academy AKEPT Ministry of Higher Education (MOHE), in Tokyo,
Japan • ISO/TC69 Workshop and Seminar on Application of Statistical and Related
Methodology for New Technology and Product Development, organized by Institute of Statistical Mathematics on 21 June 2012, Tachikawa, Japan
THESIS
Ph.D. Mechanical Engineering 2014 Supervisors: Prof. Zenichi Miyagi, Shin Taguchi and Prof. Bo Bergman
• Thesis produced in 2014: On the Development of Measurement System using Robust Design Engineering based on Peel Strength Measurement
• Venue: Measurement Information Laboratory, Robust Quality Engineering https://m-repo.lib.meiji.ac.jp/dspace/bitstream/10291/16703/1/rozzeta_2014_rikou.pdf
M.Eng. Mechanical Engineering (Advance Manufacturing Technology) 2006 Supervisor: Assoc. Prof. Hamidon Musa Title: Etching Performance of Silicon Wafers with Redesigned Etching Drum B.Sc Hons. In Chemical Technology 2002 Supervisor: Prof. Bohari M. Yamin Title: Manufacturing and Research on Adsorption Capacity of Zeolite-based Desiccant
ORIGINAL BOOK AND BOOK CHAPTER
[1] Rozzeta Dolah, Hamidon Musa. “Etching performance of silicon wafers with redesigned etching drum: An approach to etching optimization” Lambert Academic Publishing
GmbH & Co.KG. ISBN:978-3-8473-4419.Germany.2012. [2] Rozzeta Dolah, Zenichi Miyagi. “How Quality Engineering in Japan Affects Global
Product Performance”, Malaysia-Japan Academic Scholar Conference (MJASC2013) Tokyo, Japan, Springer Japan Publisher, 8&9 November 2013.
http://link.springer.com/chapter/10.1007/978-4-431-54439-5_11 [3] Amir Hamzah Baharuddin, Rozzeta Dolah, Nelidya Md.Yusoff, Mohd Nabil
Muhtazaruddin.“Assessment of Airbone Maritime Situation Control System (AMASCOS) in Military Aircraft”, Chapter 5 :Aircraft Management from Engineering Safety Perspective, Sistem publisher, Malaysia, 2017
[4] Ruzana Ahmad, Hazilah Mad Kaidi, Rozzeta Dolah, Nir Fazilah Mohd Hashim. “Design Ergonomic Risk Assessment for Pregnant Worker”, Chapter 1: Managing Risk in the Workplace, Sistem publisher, Malaysia, 2017 [5] Afham Abdul Rahman, Rozzeta Dolah, Hazilah Mad Kaidi, Mohamad Zaki Hassan.
“Safety Culture in Royal for Malaysian Air Force (RMAF)’s Hangar”, Chapter 4: Managing Risk in the Workplace, Sistem publisher, Malaysia, 2017
[6] Zahari Ali, Nelidya Md. Yusoff, Raihana Mohd. Ali, Rozzeta Dolah. “Level of Awareness among Personnel Working in Confined Space at Raw Water Storage Power Plant,
Johor”, Chapter 3: Occupational Safety and Health: Issues and Challenges, Sistem publisher, 2017
EXPERT REPORT [1] Rozzeta Dolah, Halimaton Hamdan, Nazlan Muhid, Khair Azim Rashid, Sulaiman
Bakhtiar Rashidi. ‘The Development of a Prototype Device using Nano-Material to Increase Dissolution of CO2 Gas in Marine Microalgae Culture’, Final Report submitted to Tenaga Nasional Berhad (TNB Research) TNBR/C08/2016, Malaysia, April 2016
[2] Rozzeta Dolah, Sha’ri Mohd Yusof, Mohamad Zaki Hassan. ‘Multi-Regression
Optimization (Vehicle Dynamic Responses) using Taguchi Method in Various Ride and Handling Performance’, Final Report submitted to PROTON – Malaysia automobile/ automotive manufacturer, Malaysia, June 2016
[3] Halim Hamzah, Rozzeta Dolah, Sha’ri Mohd Yusof, Khairur Rijal Jamaludin.
‘Remanufacturing Industry under RMK-11, appointed as the National Expert by Ministry of International Trade and Industry (MITI) 2015
PLENARY LECTURE / KEYNOTE ADDRESS [1] Rozzeta Dolah, ‘MINITAB WISDOM: What I Learnt from My MIT Sojourn’, MINITAB
Insight Day conference Keynote Address, 29 August 2019, Subang Jaya, Malaysia [2] Rozzeta Dolah, ‘Biomass Conversion into Biofuels & Current Advancement of
Renewable Energy in Malaysia’, The International Symposium on Renewable Energy 2019: MIT and US East Coast Presidential Council (US EPIC) Keynote Address, 16 February 2019, Massachusetts Institute of Technology, MIT Stata Centre, USA
APPOINTED AS JOURNAL REVIEWER
Reviewer for Research in Engineering Design journal: https://www.editorialmanager.com/ried/default.aspx
Chief Editor for Journal of Advanced Research in Robust Engineering & Quality Management: http://www.akademiabaru.com/arrqe_editorialboard.html
Editorial Board Member for Inquest Journal of Robotics (IJR) http://inquestpublishers.org/Subject_wise/index/IJR Journal of Testing and Evaluation ASTM, International Symposium on Intelligent Systems Technologies and Applications (ISTA'16) Journal of Advanced Research in Applied Mechanic, Universiti Teknologi Malaysia, Akademia Baru SKILLS Language (Written and Spoken): Fluent in Malay, English, Japanese Computer: MINITAB, Statgraphics V5, CAD/CAM, COMSOL, ANSYS Fluent and CFD
REFERENCES
Prof. Dr. Rohit N. Karnik MIT Dept. of Mechanical Engineering Building 3-461 A, Microfluidics & Nanofluidics Research Lab, Massachusetts Institute of Technology, 77 Massachusetts Ave, Cambridge, MA 02139 United States of America +1 617 314 1155 [email protected] Prof. Dr. Awaluddin bin Mohamed Shaharoun Faculty of Engineering Islamic University of Madinah Prince Naif ibn Abdul Aziz, Al Jamiah Medina AlMunawarah 42351 KSA +6019 601 9075 [email protected] [email protected]
Prof. Dr. Zenichi Miyagi Dept. of Mechanical Engineering Meiji University, Higashi Mita 1-1-1, Kanagawa-ken, 214-8571 Japan +81 449 347 399 [email protected] [email protected]
Abu Bakar Hanapi Manager, S.E.H (M) Sdn. Bhd. (ShinEtsu Handotai Manufacturing Industry) Lot no. 2, Lorong Enggang 35, Ulu Klang Free Trade Zone, 54200 Selangor, Malaysia +6 018 373 8584 [email protected]
26
