1340841P CIABIUMAYREI Prime Plastics-6 · 2015. 1. 30. · Impco Model BAX70-216 Dual 16 Lb. Shot Accumulator Head Blow Molding Machine;S/N P0549, 36” Head Center Distance, 200

Large Capacity Modern Industrial Blow Molder Including; (7) Single and Dual Head Blow Molders to 25 Lb. Cap., (7) Granulators to 150 HP, Conair Blenders,

Lift Trucks, Air Compressors, Chiller and Support Equipment, Equipment as Late as 2007

Large Capacity Modern Industrial Blow Molder Including; (7) Single and Dual Head Blow Molders to 25 Lb. Cap., (7) Granulators to 150 HP, Conair Blenders,

Lift Trucks, Air Compressors, Chiller and Support Equipment, Equipment as Late as 2007See Instructions on Page 2

To Become a Qualified Bidder on the Internet

(2) Hartig Single 25 Lb. Shot AccumulatorHead Blow Molding Machines

Sterling Dual 8 Lb. Shot AccumulatorHead Blow Molding Machine

(3) Lift Trucks to 10,000 Lb. by Clark, Kalmar,and Komatsu

(2) 36” X 36” Rotogran Model WO-3636-HD-TBPlastic Granulators

Sterling Dual 15 Lb. Shot Accumulator Head Blow Molding Machine

Assets from the U.S. Bankruptcy Court Western District of Pennsylvania Case No. 13-20698TPA

PRIME PLASTICS, INC.PRIME PLASTICS, INC.100 Detroit Ave., Washington, Pennsylvania 1530130 Miles South of Pittsburgh, Pennsylvania

SALE DATE: WEDNESDAY, JAN. 22ND, STARTING AT 10:00 AMSALE DATE: WEDNESDAY, JAN. 22ND, STARTING AT 10:00 AMINSPECTION: TUESDAY, JANUARY 21ST FROM 10:00 AM TO 4:00 PM

biditup.com Phone 818-508-7034

maynards.com Phone 248-569-9781

reichbros.comPhone 914-614-1800

CINCINNATIINDUSTRIALAUCTIONEERS

auctioneers | appraisers | since 1961

Sale Under The Management Of

Cincinnati Industrial Auctioneers2020 Dunlap St., Cincinnati, Ohio 45214Phone 513-241-9701 Fax 513-241-6760cia-auction.com | [email protected]

NEW2007

1340841P CIABIUMAYREI Prime Plastics-6 1/3/14 1:09 PM Page 3

WEDNESDAY, JANUARY 22NDWEDNESDAY, JANUARY 22ND

BLOW MOLDERS (2) Hartig Single 25 Lb. ShotAccumulator Head BlowMolding Machines; S/N R5937A,R5937B, 200 HP Saftronic DC Drive,Barber-Coleman MACO 8000Controls, 72” Wide X 60” High ClearPlaten Area, Part Take Out, AssortedHead Tooling (New 1990)

SEE PHOTO• Hartig Dual 25 Lb. Blow

Molding Head, 36” CenterDistance

Impco Model BAX70-216 Dual16 Lb. Shot Accumulator HeadBlow Molding Machine; S/NP0549, 36” Head Center Distance,200 HP Relicense DC Drive, Barber-Coleman MACO 8000 Control, 72”Wide X 52” High Clear Platen Area,Part Take Out, Assorted Head Tooling(New Early 1990’s) SEE PHOTOSterling Dual 15 Lb. ShotAccumulator Head BlowMolding Machine; S/N 07976, 36”Head Center Distance, 200 HPReliance DC Drive, Barber-Coleman

MACO 8000 Control, 74” Wide X 60”High Clear Platen Area, Part Take Out,Assorted Head Tooling (New 1994)

SEE PHOTOSterling Dual 8 Lb. ShotAccumulator Head BlowMolding Machine; S/N 07863, 30”Head Center Distance, 100 HPReliance DC Drive, Barber-ColemanMACO 8000 Control, 62” Wide X 38”High Clear Platen Area, Assorted HeadTooling (New 1993) SEE PHOTOSterling Dual 5 Lb. ShotAccumulator Head BlowMolding Machine; S/N 07477, 18”Head Center Distance, 100 HPReliance DC Drive, 40” Wide X 33”High Clear Platen Area, Assorted HeadTooling (New 1992) SEE PHOTOSterling Dual 3 Lb. ShotAccumulator Head BlowMolding Machine; S/N N/A, 17”Head Center Distance, 75 HP BalderSpectrum DC Motor / Drive, 35” WideX 20” High Clear Platen Area,Assorted Head Tooling (Estimated1994) SEE PHOTO

(2) Hartig Single 25 Lb. Shot Accumulator Head Blow Molding Machines


(2) Hartig Single 25 Lb. Shot Accumulator Head Blow Molding Machines

Inside View Sterling Dual 15 Lb. Blow Molder

WEBCAST BIDDER INSTRUCTIONS➢ All Internet bidders must register for this

auction at www.bidspotter.com at least 48-Hours Prior to the Sale Date, if you do not you will not beapproved.

➢ All Internet bidders must Post a Depositof Approx. 25% of Your PlannedSpending Budget or $5,000.00 Minimumwith Cincinnati Industrial Auctioneers inOrder to be approved to Bid. Those who do Not Post the DepositWill Not be Approved. Period.Impco Model BAX70-216 Dual 16 Lb. Shot Accumulator Head Blow Molding

Machine

UPDATED CONTROLAND ELECTRIC


PRIME PLASTICS, INC.PRIME PLASTICS, INC.

Hartig Dual 25 Lb. Head Inside View Hartig 25 Lb. BlowMolder

Inside View Sterling Dual 5Lb. Blow Molder

Inside View Sterling Dual 8Lb. Blow Molder




Large Quantity Blow Molder Head Tooling

• 76,500 Sq Ft. Industrial Building

• 5.1 Acres Of Ground

• 2 Loading Docks With Levelers

• 1 Large Drive In Door

• Office And Lunch Room Areas

Contact:Beynon & CompanyRichard L. Beynon Or Ben BrownPhone-412-261-3640E Mail [email protected]

INDUSTRIAL REAL ESTATE FOR SALE

Complete Electrical Distribution Panel. SeePage 5 For Details



PLASTIC GRANULATORS (2) 36” X 36” Rotogran Model WO-3636-HD-TBPlastic Granulators; S/N HP3636HDTB0703106W0and HP3636HDTB0703107W0, 150 HP, 460 Volt, with10 HP Blower Discharge, Cyclone, Rotary Airlock and34” Wide X 20’ Long Inclined Belt Conveyor Feed (New 2007) SEE PHOTO22” X 24” Rotogran Model WO-2224 PlasticGranulator; S/N F22240311155WO, 50 HP, 460 Volt,5 HP Blower Discharge, Cyclone and Rotary Airlock(New 2003) SEE PHOTO22” X 24” Rotogran Model WO-2224 PlasticGranulator; S/N HP22240010117WO, 40 HP Motor,Blower Discharge, Cyclone and Airlock (SeverelyDamaged, Scrap Components Only) 16” X 24” Granutec Model TFG1624 PlasticGranulator; S/N 2140, 50 HP Motor, 5 HP BlowerDischarge, Cyclone, Rotary Airlock and Gaylord Fill(New 2000’s) SEE PHOTO(2) 14” X 16” Cumberland Plastic Granulators;20 HP Motor; S/N 421000-8017 and 421000-80110,460 Volts, Gaylord Discharge SEE PHOTO

MATERIAL BLENDERS AND VACUUM LOADERS(7) Conair Model True Blend TB 4-ComponentWeight Blenders; S/N TBM201434), TBM211752,TBM211756, TBM211755, TBM208504, TBM211754,(1) n/a with Assorted Vacuum Loaders (New 2007)

SEE PHOTO

(3) 10 HP Conair Model PD10 PositiveDisplacement Vacuum Pumps with DustCollectors; S/N 212449, 212450, 212448, 480 Volt

SEE PHOTOConair Model B32-BAAN 32-StationProgrammable Central Vacuum Loader Control;S/N WN-5000539-01Assorted Central Vacuum Loaders

SILOS (2) 12’ Diameter X 56’ High Schuld Welded SteelMaterial Storage Silos; S/N 8074-2 and N/A, 45Degree Cone, Safety Ladders, Crosswalk and Truck Fill

SEE PHOTO

RAILCAR UNLOAD SYSTEM 75 HP MAC Colt-On Push/ Pull Vacuum /Pressure Railcar Unloading System; w/ FilterReceiver, Air Lock, Piping and Control Panel

SEE PHOTO

STRETCH WRAPPER Lantech Q Series Automatic Stretch Wrapper;S/N QX000125, 65” Table SEE PHOTO

TRAILER 12’ Gator USA 2,990 Lb. GVWR Utility FlatBed Single Axle Trailer with Fold DownLoading Ramp; VIN # 4Z1UA1210CS022855 (New2012)

16” X 24” Granutec ModelTFG1624 Plastic Granulator

Lantech Q Series AutomaticStretch Wrapper

75 HP MAC Colt-On Push/ Pull Vacuum / Pressure RailcarUnloading System

(2) 12’ Diameter X 56’ HighSchuld Welded SteelMaterial Storage Silos

(7) Conair Model True Blend TB 4-Component WeightBlenders

(2) 14” X 16” CumberlandPlastic Granulators

(3) 10 HP Conair Model PD10Positive DisplacementVacuum Pumps with DustCollectors

(2) 36” X 36” Rotogran Model WO-3636-HD-TBPlastic Granulators

22” X 24” Rotogran Model WO-2224 PlasticGranulator

(2) 36” X 36” Rotogran Model WO-3636-HD-TB PlasticGranulators

(7) AVAILABLE

NEW2007

NEW2007

NEW2003

NEW2007

50 HP150 HP

150 HP



ELECTRICAL PANEL 3000/4000 KVA Square D PowerDry II Sorgel Dry TypeTransformer; S/N 18835087-008-02, HV 4160, LV 480Y/277, LV Amps3,608/4,811, Class AA/FA, Type VPI,3-Phase, 60 HZ with Square D PowerLogic Model 98 Digital TemperatureController (New 2008)Square D Master Pact NW40HCircuit Breaker SeriesDisconnect; S/N 085016359401, CatNo. YL3KJM63A3SXXXXXXXV, withPower Logic Power Meter (New 2008)(2) Square D QED Power StyleSwitchboards; CAT No. 18835087-011, with (1) 800A, (1) 500A, (3)400A, (2) 250A, (2) 200A, (3) 150ABreakers (New 2008)

CENTRAL CHILLER 125 Ton Trane ModelRTWA1254XM01A3DOB AirCondensed Outdoor CentralChiller; S/N U01E00702, TraneAdaptive Computer Control Panel(New 2001) SEE PHOTO

PUMP TANK 8’ Long X 5’ High X 4’ Wide MildSteel Chilled Water Pump Tank;with (2) 40 HP Circulating Pumps,460 Volt

AIR COMPRESSORS ANDRELATED100 HP Quincy ModelQSI500ACA3ISD Air CooledRotary Screw Air Compressor;S/N 90691J, 58,334 Hours, 460 Volt

SEE PHOTO

100 HP Ingersoll-Rand ModelSSR-EP100 Air Cooled RotaryScrew Air Compressor; S/ND7218U88B-S, 41,791 Hours, 460 Volt

50 HP Gardner Denver ModelEBHOJC-BAGAACC Air CooledRotary Screw Air Compressor;S/N U81507, 460 Volt (New 1997)

Gardner Denver ModelRNC1250A4 Refrigerated AirDryer; S/NRGOB112BBA4A2NE07018, 460 Volt,1250 SCFM (New 2007)

SEE PHOTO

FORKLIFT TRUCKS10,000 Lb. Clark Model CGC50Solid Tire Propane ForkliftTruck; S/N CGC470L-0077-6768FB,Side Shift, Triple Mast, 8’ ExtendedForks, 4,988.5 Hours

5,000 LB Hyster Model S50FTLP Gas Solid Tire Lift Truck; S/NF187V07592D, Three-Stage Mast,218” Lift Height, Monotrol, Side Shift,Finger Tip Controls (New 2006)

4,480 Lb. Kalmar ModelC50BXPS Solid Tire PropaneForklift Truck; S/N 586641A,Triple Mast, Side Shift, 5,816 Hours

3,000 Lb. Komatsu ModelFG20SHT-14 Solid Tire PropaneForklift Truck; S/N 590535A,Triple mast, Side Shift, 6,586 Hours

SEE PHOTO

• Box Clamp Attachment

SKID STEERBobcat Model 763 Solid TireSkid Steer Loader; S/N N/A, with66” Bucket SEE PHOTO60” Bobcat Sweeper 60Hydraulic Rotary BroomAttachment; S/N 714413594

SCISSOR LIFT JLG Model 3246-E2 SelfTraveling Electric Scissor Lift;S/N 0200064193, 32’ Max PlatformHeight, 700 lbs. Rated Work Load(New 2000) SEE PHOTO

Upright Model SL30 DieselPowered Rough Terrain ScissorLift JLG Model 2032E2 ElectricScissor Lift

FLOOR SCRUBBER Clark American Lincoln 6200Model 505-401 Electric RiderType Floor Scrubber; S/N 650597

MISCELLANEOUS ANDTOOLROOM60” X 30” Union WasteReduction Vertical Baler 48” X 48” Digital Platform Scalewith Trans-Scale T1-500EReadout Miller Bobcat 225 Welder /Generator; S/N LF335437

SEE PHOTO

MSC Model 00685446 Mill Drill;S/N 131514, 8” X 29” Table 17” Delta Drill Press

Bobcat Model 763 SolidTire Skid Steer Loader

125 Ton Trane Model RTWA1254XM01A3DOB AirCondensed Outdoor Central Chiller

100 HP Quincy Model QSI500ACA3ISD Air Cooled RotaryScrew Air Compressor

(3) Lift Trucks to 10,000 Lb. by Clark, Kalmar, and Komatsu

3,000 Lb. Komatsu Model FG20SHT-14 Solid Tire PropaneForklift Truck

Heavy Copper Wire from Service Panel to Machines

Complete Square D Electrical Distribution Panel Including: 3000 KVA Transformer, Disconnect Panels, andWiring

JLG Model 3246-E2 SelfTraveling Electric ScissorLift

Gardner Denver ModelRNC1250A4Refrigerated Air Dryer

Miller Bobcat 225 Welder/ Generator

NEW2001

NEW2008

NEW2007 NEW2000


All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All sales are subjectto state and/or local taxes unless a signedexemption form is presented at the time of pur-chase. All balances are due at the conclusionof the sale. No merchandise may be removedwhile the sale is in progress. All bidders mustcomply with our Standard Terms of Sale,copies of which will be available at the sale siteor can be obtained from our website.

15% ONSITE BUYER’S PREMIUM 18% ONLINE BUYER’S PREMIUM

TERMS OF SALE

AUCTIONEERS

From I-77 East of Washington, follow I-79 South forapprox. 1 Mile to No. 33, US-40 West. Proceed west onUS-40 (W. Maiden St.) for approx. 1-1/2 miles west toDetroit Ave.. Turn Right and Proceed to Auction Site atend of Street. Auction Site is on the East side ofDowntown. Watch for Auction Parking Signs and Arrows.

DIRECTIONS


SALE DATE:Wednesday, Jan. 22nd

STARTING AT 10:00AMINSPECTION:

Tuesday, January 21st10:00 AM to 4:00 PM

FIRST CLASS MAIL! PRE-SORTFIRST CLASS

U.S. POSTAGEPAID

CINCINNATI, OHIOPERMIT NO. 3593

Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞

LARGE CAPACITY MODERN INDUSTRIAL BLOW MOLDERINCLUDING; (7) SINGLE AND DUAL HEAD BLOW MOLDERS TO

25 LB. CAP., (7) GRANULATORS TO 150 HP, CONAIR BLENDERS,LIFT TRUCKS, AIR COMPRESSORS, CHILLER AND SUPPORT

EQUIPMENT, EQUIPMENT AS LATE AS 2007

Although information has been obtained from sourcesdeemed reliable, the auctioneer makes no warranty orguarantee, expressed or implied, as to the accuracy ofthe information herein contained. It is for this reasonthat buyers should avail themselves of the opportuni-ty to make inspection prior to the sale. This brochureis intended to provide general information of the equip-ment being offered and is subject to errors, omissions,additions or deletions. Please check with the Auctioneer’sOffice for a final listing. Items offered may or may notnecessarily be sold as described and/or photographed inthis brochure.

MAIL BIDS ACCEPTED WITH A 25% DEPOSIT

IMPORTANT NOTICE:

100 Detroit Ave.Washington, Pennsylvania 15301

30 Miles South of Pittsburgh, Pennsylvania

(3) Lift Trucks(3) Lift Trucks(3) Lift Trucks (7) Granulators to 2007(7) Granulators to 2007(7) Granulators to 2007

(8) Blow Molders(8) Blow Molders(8) Blow Molders

100 Detroit Ave.Washington, Pennsylvania 1530130 Miles South of Pittsburgh, Pennsylvania

Assets from the U.S. Bankruptcy Court Western District ofPennsylvania Case No. 13-20698TPA

Jeffrey L. LuggenJerome A. Luggen Jeffrey M. Luggen Joseph M. Luggen

John F. Rome

Assets from the U.S. Bankruptcy Court WesternDistrict of Pennsylvania Case No. 13-20698TPA

PRIME PLASTICS, INC.PRIME PLASTICS, INC.

PRIMEPLASTICS, INC.

PRIMEPLASTICS, INC.

reichbros.comPhone 914-614-1800

biditup.com Phone 818-508-7034

maynards.com Phone 248-569-9781



Sale Under The Management Of

Cincinnati Industrial Auctioneers2020 Dunlap St., Cincinnati, Ohio 45214Phone 513-241-9701 Fax 513-241-6760cia-auction.com | [email protected]



Contact Information2020 Dunlap St.Cincinnati, Ohio 45214Phone 513-241-9701Fax 513-241-6760www.cia-auction.com


Documents

1340841P CIABIUMAYREI Prime Plastics-6 · 2015. 1. 30. · Impco Model BAX70-216 Dual 16 Lb. Shot Accumulator Head Blow Molding Machine;S/N P0549, 36” Head Center Distance, 200