Cost Effective Jumbo Accumulator Head

Blow Molding

Andrew HobsonUS Technical Manager

Pet All Manufacturing Inc.

Pet All Manufacturing Inc. OverviewBased in Toronto, Ontario

Established in 1989

Engineering, Technical, Parts and Service based in Toronto

Manufacturing in Asia using OEM Partners and Asian based PET ALL Staff

Single State and Two Stage PET Machines

Injection Blow Molding Machines including all electric options

Full line of Continuous Extrusion Blow Molding Machines

Accumulator Head Machines up to 1,500lb Shot Sizes

Downstream equipment including Leak Detection, Vision Systems, and Packout

Rotational Molding vs Blow Molding

-Rotational molding has historically been the go

to technology for large containers

-Rotational molding uses resin that has been

flaked which adds cost to the material

-In Rotational Molding, the resin is placed into

the mold and is then heated along with the

Mold as the mold spins. Results in long cycle

Times.

-Rotational molded parts have a very consistent

wall thickness and near square corners can be

molded

-Limited material options for rotomolding

-Long cycle times

Blow Molding vs Rotational Molding

-Many material choices available

-Much faster cycle times than rotational molding

-Parison programming for molding thicker and thinner

Sections of the parts

-More wall thickness variation than rotational molding

-Large corner radii needed for part design considerations

-Options for multi-layer products

-Easily use regrind in the process without needing an

extra step to flake the resin

What constitutes a large blow molded part?

330 Gallon IBC

5000 Gallon Water Tank

OEM Partner

Manufacturing

Facility

Pet All Jumbo Machine Capabilities

-Head Sizes up to 700kg/1,540lbs shots

-Single and Dual Head Options (limited sizes for dual heads)

-Up to 4 Layers

-Platens up to 6,000mm/236” tall and 4,500mm/177” wide

-Head tooling up to 1,800mm/70” in diameter

-Standard machine sizes available

-Custom machines can be requested based on customer

specifications

20,000L Machine with 4 Layers

10,000L Machine with 4 Layers

Custom Machines with Platens up to 6000mm tall

Drum & IBC Machines

Large Tanks

Large Tanks

5,000 US Gallon/20,000L Blow Molded Tank

3,000 Liter Tank

Tanks

Portable Toilets

Minnesota Technology

Center-Opening

November 2018

74lb Shot-Three Layer Machine

10,000 Sq. Ft. Facility

Andrew HobsonUS Technical Manager

Direct: 319-883-9264

Pet All Manufacturing Inc.

85 Royal Crest Court

Units 1&2

Markham, Ontario

L3R 9X5 Canada

Phone: 905-305-1797

www.petallmfg.com

www.canmoldplastics.com