Slide 1Soc Classification level
* © Nokia Siemens Networks
Change your computer LAN IP address before commissioning:-
IP Address: 192.168.255.130(For RU10 Only)
192.168.255.130(For RU20 Only)
Subnet Mask: 255.255.255.0
Connect LAN cable at system module LMP port.
Click on BTS Site Manager
Put Local at IP address field for connect the BTS locally.
User Name: Nemuadmin
Start Commissioning.
Click next.
WCDMA Video call Testing Procedure
Fill Entries as per the site Planning data given by planning team.
Click next.
Step 4
Node-B Commissioning
Fill Entries as per the site Planning data.
Click next.
Step 5
Node-B Commissioning
WCDMA Video call Testing Procedure
Create IMA Groups as per IMA group created by planning team.
Click next.
Step 6
Node-B Commissioning
Define Synchronization source for SDH/PDH, if they are used.
Click next.
Create Traffic Descriptor as per the available planning data.
Click next.
Step 8
Node-B Commissioning
Define IUB termination to the BTS.
Click next.
Step 9
Node-B Commissioning
Define VCC bundle if needed. Otherwise go next.
Click next.
Step 10
Node-B Commissioning
Define DCN interfaces and IP over ATM.
Click next.
Step 11
Node-B Commissioning
Define Static routes of DCN routing. Put Default gateway IP.
Click next.
Step 12
Node-B Commissioning
WCDMA Video call Testing Procedure
Define IP filtering if needed. Otherwise go to the next steps.
Click next.
Step 13
Node-B Commissioning
Define BTS setting. Like Time zone, configuration and synchronization details.
Click next.
Step 14
Node-B Commissioning
WCDMA Video call Testing Procedure
Create Local Cells. Define antenna and power to the local cell.
Click next.
Step 15
Node-B Commissioning
WCDMA Video call Testing Procedure
Define RNC types. If RNC is NSN then just select and go to next.
Click next.
Step 16
Node-B Commissioning
WCDMA Video call Testing Procedure
Define UARFCN. Appropriate UARFCN has to give for particular frequency band.
Click next.
Step 17
Node-B Commissioning
Click next.
Step 18
Node-B Commissioning
Define HSPA Quality of service setting if needed.
Click next.
Step 19
Node-B Commissioning
WCDMA Video call Testing Procedure
Define AISG MHA Setting if MHA used at site. Otherwise leave it blank.
Click next.
Step 20
Node-B Commissioning
Define antenna line setting for each antenna.
Click next.
Step 21
Node-B Commissioning
WCDMA Video call Testing Procedure
Define Siemens proprietary AISG1.1 TMARET and RET setting if needed. Otherwise leave it blank.
Click next.
Step 22
Node-B Commissioning
WCDMA Video call Testing Procedure
Define Remote Electrical Tilt (RET) setting if needed. Otherwise leave it blank.
Click next.
Step 23
Node-B Commissioning
Select send for updating system module with defined parameter.
Select View option for review and save option for saving snapshot.
Click next.
Step 24
Node-B Commissioning
Save Commissioning file for further use.
Click Finish.
Step 25
Node-B Commissioning
Commissioning has completed.
THANKYOU