23
Thank you for choosing our high quality camera. Before attempting to connect or operate, please read and follow these instructions. OPERATION MANUAL M060-DN100-001

Sy…Ra1ß ¦2e n çg%N çÛI³…QRéÙ/¨ > L® ¸MêĘºÆ¦×9z ܪHTsø N ‰ ¤g–ö¬&Õ k©‘þcÚT®J¶ üÕ4„ú…< ô®Êž &^h±¶%’ºÎmIZô–”ý0->

Embed Size (px)

Citation preview

Thank you for choosing our high qual i ty camera. Before at tempt ing to connect or operate, p lease read and fol low these instruct ions.

OPERATION MANUAL

M060-DN100-001

z

CONTENTS

1. Cautions2. Features3. Package4. Overview and function5. Instal lat ion6. Connection7. Dimensions8. Specif ications9. Setup menu operation • SETUP MENU • SETUP MODE • CAMERA ID • LENS • SHUTTER • WHITE BALANCE • LANGUAGE MODE SETUP • RESET

10.Funtion Menu operation • FUNTION MENU • BLC • AGC • DAY&NIGHT • PRIVACY • MIRROR • GAMMA • MOTION

11.Troubleshooting

3

1.Cautions

4

This device complies with Part 15 of the FCCRules. Operation is subject to the following two conditions;1. This device may not cause harmful interference.2. This device must accept any interference received, including interference that may cause undesired operat ion.

This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasnoable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio communications.However, there is no guarantree that interference will not occur in a particular installation. If this equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Note-

• Reorient or relocate the receiving antena.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to   whice the receiver is connected.• Consult the dealer or an experienced radio / tv technician for helf.

Any changes or modifications in construction of this devies which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Caution -

1. A regulated DC12V 1.5A power supply is recommended for use with this camera for the best picture and the most stable operation. An unregulated power supply can cause damage to the camera. When unregulated power supply is applied, product warranty will be out of subject.2. It is recommended that the camera is used with a monitor that has a CCTV quality 75 video impedance level. If your monitor is switched to high impedance the n please adjust accordingly.3. Do not attempt to disassmble the camera to gain access to the internal conponets. Refer servicing to your dealer.4. Never face the camera towards the sun or any bright or reflective light, which may cause smear on the picture and possible damage to the CCD.5. Do not remove the serial sticker for the warranty service.

Correct Disposal of This Product(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

This product should not be mixed with other commercial wastes purchased this product, or their local government office, for details of where and how they can take item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract.Household users should contact either the retailer where they for disposal.

1.Cautions

5

CAUTIONS12.Features

6 7

• 1/3″Sony Super HAD CCDⅡ• 550TV Lines• OSD Function• Digital slow shutter, Manual shutter• Privacy Zone• Dual Voltage use DC12V/AC24V• Motion Detection• 3-Axis Gimbal

The Serv ice Video Connector a lso provides the insta l ler wi th an easy way of conf igur ing the camera.

• Service Video connector

6 7

FEATURES2 CAUTIONS13.Package

1 DOME CAMERA

2 VIDEO OUTPUT TEST CABLE

3 OPERATION MANUAL

4 SCREW - 3ea

4.Overview and function

• CONTROL FUNCTION (OSD JOYSTICK)

LEFT

UP

RIGHT

DOWN

MENU

• Name (LED Type)

• Name (Standard)

8 9

5. Instal lat ion

8 9

NOPART NAME

STANDARD Type LED Type1 Housing Botton

2 Holder Panning

3 Holder Tlit

4 Holder Rotate

5 Cover Sun Shield Cover LED

6 Housing Top

7 Cover, Dome

1

2

34

5

6

7

Standard Type

LED Type

6.Connection

10

BNC FEMALEVIDEO

VIDEO IN

DC 12V POWER SUPPLY

BNC FEMALEVIDEO

VIDEO IN

DC 12V / AC 24VDUAL POWER SUPPLY

When you install the camera, please glue up the end of cable to keep it stable in order to protect the camera from the humidity problems.

• DUAL(DC12V/AC24V)

• DC12V

7.Dimensions

11

Ø136.4

45

95.3

Ø100

Unit : mm

50˚70˚

65˚

When using a wide angle lens of 2.6mm, Tilt is not available over 65°.

8.Specif ications

12

Signal Format NTSC PALimage Device 1/3″Sony Super HAD CCDⅡScanning System 2:1 InterlaceH.Resolution 550TV LinesScanning Frequency H:15.734KHz, V:59.94Hz H:15.625KHz, V:50HzTotal Pixels 811(H) x 508(V) 795(H) x 596(V)Effective Pixels 768(H) x 494(V) 752(H) x 582(V)Electronic Shutter Speed 1/60 sec 1/50 secS/N Ratio More than 48dB(AGC Off)Gamma r=0.45Min. Illumination 0.05 Lux / Face Plate Sync System InternalVideo Output 1.0 Vp-p Composite 75(Ω) unbalanced

PowerConsumption

DC12V DC 12V (±10%) Max110mA

Dual DC 12V (±10%) 160mAAC 24V (±10%) 1.8W

Operating Temperature -10 ~ +50Storage Temperature -20 ~ +60Operating Humidity 10% ~ 80%Options Dual PowerWeight 343g

PowerConsumption

DC12V DC 12V (±10%) Max 550mA

Dual DC 12V (±10%) 650mAAC 24V (±10%) 6.8W

Min. Illumination 0 Lux (IR LED ON)IR LED 30eaIR LED Half Angle ±22 DegreeIR LED Wavelenght 850nmIR Beam Range Up to 30MIR LED Operation On : 1 Lux, Off : 3 Lux

LED TYPE

When you fix the focus around 22.0mm in f9.0-22.0mm Varifocal lens, please set short distance focus approximately 3M and do not set long distance focus

Face Plate : Point at the CCD without obstruction of light from any other material.

9.Setup menu operation

OSD STRUCTURE

• , : Menu up / down

• , : Set-up Key

• : MENU(SELECTION KEY)

SETUP MENUCAMERA ID • ON • OFF

LENS • MANUAL • VIDEO • DC

SHUTTER • AUTO • FLK • FIXED • MANUAL

WHITE BAL. • ATW • AWB • FIXED • MANUAL

FUNCTION• BLC • AGC • DAY & NIGHT • PRIVACY

• MIRROR • GAMMA • MOTION

ADJUST• CONTRAST • SHARPNESS

• CB_GAIN • CR_GAIN

LANGUAGE • ENGLISH • KOREAN • CHINESE1 • CHINESE2 • JAPANESE

RESET • YES • NO

EXIT

13

14 15

9.Setup menu operation

14 15

9.Setup menu operation

9.Setup menu operation

16 17

9.Setup menu operation

16 17

10.Funtion Menu operation

18 19

10.Funtion Menu operation

18 19

10.Funtion Menu operation

20 21

10.Funtion Menu operation

20 21

10.Funtion Menu operation

22 23

10.Funtion Menu operation

22 23

11.Troubleshooting

24