Embed Size (px)
Citation preview
Detailed, Group by Number
-Submittal Transmittal
Date: 6/9/2015 Reference Number: 0605
Transmitted To: Transmitted By: Margot vanSwearingenLarry Busch
Cadman Inc. Skanska USA Building Inc.7554 185th Ave NE, Suite 100Redmond, WA 98073Fax: (425) 861-9282
929 109th Ave NEBellevue, WA 98004
Submittal Package No Description Due Date Package ActionQty
Approved as Noted6/9/2015On Site Concrete Mix Designs0286 - 030013 - 11
Transmitted For Delivered Via Tracking Number
EmailInformation
Notes Item ActionItems DescriptionQty Spec Sub Spec
0001 On Site Concrete Mix Design- Topping Slabs SOG, walls, curbs, and footings
Approved as Noted
1 030013
0002 On Site Concrete Integral Color Product Data
Approved as Noted
1 030013
Contact Name Copies NotesCompany NameCc:
Remarks
Keith and Lori, Attached please find the partially approved mix designs for the on-site concrete. Please keep for your records.We need to get either color samples to the architect, or arrange a time this week when they can review the large-scale sample in your Redmond yard.
Thank you, Margot
Signature Signed Date
Detailed, Group by Number
-Submittal Transmittal
Date: 5/29/2015 Reference Number: 0596
Transmitted To: Transmitted By: Amanda MahanKevin Reed
GGLO Skanska USA Building Inc.1301 First Avenue Suite 301Seattle, WA 98101Tel: (206) 467-5828
221 Yale Ave. N., Suite 400Seattle, WA 98109Tel: 206-726-8000Fax: 206-328-9235
Submittal Package No Description Due Date Package ActionQty
6/12/2015On Site Concrete Mix Designs0286 - 030013 - 11
Transmitted For Delivered Via Tracking Number
EmailApproval
Notes Item ActionItems DescriptionQty Spec Sub Spec
0001 030013
Contact Name Copies NotesCompany NameCc:
Remarks
Attached please find two mix designs for on site concrete only. The topping slab is a pea gravel mix for the thin slab condition and to be pumpable. The second mix is for all other pedestrian concrete surfaces i.e. on site sidewalks, "Bands", walls, curbs, and footings. A single mix for these elements will ensure color consistency. Product data for the integral color is also included. Documents call for Davis "Dark Grey", however Cadman doesn't use Davis color, but they do color match to Davis "Dark Grey". As discussed on Wednesday between Margot and Kevin, color samples may have already been approved, if not, please let us know. If that is the case, we recommend a visit to the Cadman yard in Redmond to see a large scale mock up of all their color options. Call Margot with any questions.
Signature Signed Date
SKANSKA Date Rec’d To Arch From Arch Returned REVIEWED CORRECTION NOTED REVISE AND RESUBMIT This submittal REVIEW shall not be construed as a Complete check and indicates only that information presented conforms Generally to the Contract Documents. In no case is Subcontractor or Supplier Relieved of full responsibility for adherence to the Contract Document and Satisfactory construction of all work. Submitted to Owner, Architect-Engineer for final approval. _ _ Name: Date: Submittal #:_ _ ____
REVIEWED
05/29/2015 05/29/2015
✔
Amanda Mahan 20150529
03001302860
REVIEWED AND NOTED FOR DESIGN INTENT ONLY. DIMENSIONS AND QUANTITIES ARE NOT GUARANTEED.
REVIEWED FOR LOADS IMPOSED ON BASIC STRUCTURE ONLY
NOT REVIEWED
NO EXCEPTIONS TAKEN
NOTE MARKINGS
COMMENTS ATTACHED
REVISE & RESUBMIT
BY _____________________________
DATE ___________________________
SWENSON SAY FAGÉTA STRUCTURAL ENGINEERING COMPANY
2124 Third Avenue - Suite 100 - Seattle, WA 98121ph: 206.443.6212 fax: 206.443.4870www.swensonsayfaget.com
X
X
692015
Pea gravel to allow usto pull hose andreduce the aggregatesize for the thintopping slab.
Please confirm 4000PSI is acceptable.
acceptable, SSF 692015
SSF Rev
iew
06/09/2015
Features�� Liquid-coloring admixtures formulated for the automated CAM (Coloring Admixture Measuring) System
�� Compatible with BASF admixtures used in the production of durable decorative concrete
�� Faster dispersion into concrete
Benefits�� Beautiful, long-lasting integrally colored concrete
�� Enhanced finishing characteristics
�� Color vibrancy
�� Excellent color accuracy
�� Batch-to-batch color consistency and verifiable color batching results
�� Increased productivity and reduced labor
�� Clean and simple batching
�� Quality custom color services
MasterColor liquid-coloring admixtures meet the colorfastness testing of 500 hours light exposure per ASTM C 979. In addition, MasterColor liquid-coloring admixtures have successfully completed 1500 hours of aggressive Xenon Arc testing per ASTM G 155.
Typical Properties: Density: 14-16 lb/gal(1.68-1.92 kg/L) [@72 °F (22 °C)]
DescriptionMasterColor liquid-coloring admixtures are patented, engineered, high quality coloring dispersions producing enhanced decorative concrete. MasterColor liquid-coloring admixtures are ready-to-use integral liquids that come in four base colors:
�� Black
�� Light Red
�� Medium Red
�� Yellow
The four base colors can be used to make a wide range of colors including but not limited to the colors depicted on the MasterColor Decorative Concrete Color Selector.
ApplicationsRecommended for use in:
�� Integrally colored decorative concrete
�� Imprinted concrete
�� Ready-mixed concrete
�� Manufactured concrete products
�� Stone veneer products
�� Precast concrete
�� Pervious concrete
�� Self-consolidating concrete
MasterColor®
Liquid-Coloring AdmixturesFormerly RHEOCOLOR L*
303 30 00 Cast-in-Place Concrete
03 40 00 Precast Concrete
BASF CorporationAdmixture Systemswww.master-builders-solutions.basf.us page 2 of 3
Technical Data Sheet
Guidelines for UseGeneral: Due to the graying effect of most cements, there are some custom colors that can only be produced using very light or white cements. Variations in water content, cement type, color variations in cementitious materials or aggregates, finish texture, timing of operations, curing or forming methods, release agents or surface treatments may produce distinct, though in many cases slight, variations in final color. All standard color matches are completed using a medium shade of portland cement.
Dosage: MasterColor color formulas for standard and other regional colors are programmed into the CAM System upon installation.
MasterColor admixtures are water neutral at loading rates of 5% or less. At loading rates greater than 5%, MasterColor admixtures may provide increased water reduction depending on local concrete materials. Therefore, at loading rates above 5%, laboratory/field evaluations of MasterColor admixtures are recommended to verify desired concrete performance.
Mixing: With the automated CAM System, MasterColor liquid-coloring admixtures are weighed or metered and dispensed prior to or while loading concrete. Product and rinse water are calculated by the CAM System and should be included as total batch water. For best results add coloring admixtures prior to batching concrete. For post addition, mix a minimum of 4-5 minutes at normal mixing speed to assure uniformity.
For best results, truck or mixer should be clean and pre-wet with no standing water. A minimum batch size equal to 1/3 of the mixer capacity should be used as a guideline for efficient mixing. Keeping the addition order, mixing time, materials and water-cementitious materials ratio constant between multiple batches is critical for color consistency.
Concrete Placement and Finishing: Final color and textures should be pre-approved with a cured jobsite mock-up. In accordance with proper construction practices, slabs-on-ground shall be placed over properly compacted and prepared subgrade. Spade formed edges and consolidate and strike off surface as normal. Care should be taken to avoid over-vibration, over-working and over-finishing, or other practices that might cause excessive bleeding or significantly increase the surface mortar content.
Trowelling or broom-finishing decorative concrete should be performed in the same direction to maintain uniform appearance. Do not add additional water to the concrete either by retempering or by adding water to the surface during the finishing process.
Curing: Proper curing of decorative concrete is required to enhance the depth of color, provide a more uniformly colored concrete, and provide surface protection. MasterKure® CC 1315 water-based curing and sealing compound from BASF or a similar, compatible curing and sealing compound is recommended. Note: Until decorative concrete is fully cured, the color may appear darker than expected. Curing with burlap, plastic sheeting, water or other curing compounds may be detrimental to color uniformity and is not recommended. For more information on curing decorative concrete contact your local sales representative.
Maintenance: Regular cleaning of decorative concrete is recommended. In general, resealing may be required periodically as the sealed surface wears. Maintenance applications will be accelerated in areas of heavy use or frequent or aggressive cleaning. Heavily soiled interior areas may be cleaned by wet mopping or scrubbing with a stiff-bristle brush and properly diluted, high-quality commercial detergent. For large areas, automatic scrubbers may be more efficient and cost effective.
Clean-Up: MasterColor liquid-coloring admixtures are water based and can be cleaned with soap and water.
Product NotesCorrosivity – Non-Chloride, Non-Corrosive: MasterColor liquid-coloring admixtures will neither initiate nor promote corrosion of reinforcing steel embedded in concrete. No calcium chloride or chloride-based ingredients are used in the manufacture of these products. Complete safety information can be found on the MasterColor liquid-coloring admixture Safety Data Sheets.
Compatibility: MasterColor liquid-coloring admixtures are compatible with most admixtures used in the production of quality concrete. Supplementary cementitious materials may affect color and should be checked for potential adjustments. All admixtures should be dispensed into the concrete separately. The use of calcium chloride accelerators are not recommended in decorative concrete. Final color and texture should be verified with a cured jobsite mock-up.
Storage and HandlingStorage Temperature: MasterColor liquid-coloring admixtures should be stored between 40 and 100 °F (4 and 38 °C) with regular mixing or recirculation. To prevent pigment sedimentation, recirculate the material every 90 days or less. Always mix material well prior to use. Automated recirculation is included with the CAM System. If MasterColor liquid-coloring admixtures freeze, contact your local sales representative.
Shelf Life: MasterColor liquid-coloring admixtures have a minimum shelf life of 12 months if properly stored.
MasterColor
Technical Data Sheet
PackagingMasterColor liquid-coloring admixtures are available in 3,350 lb (1,520 kg) net returnable totes.
Related DocumentsSafety Data Sheets: MasterColor liquid-coloring admixture
�� Black
�� Light Red
�� Medium Red
�� Yellow
Additional InformationFor additional information on MasterColor liquid-coloring admixtures, contact your local sales representative.
The Admixture Systems business of BASF’s Construction Chemicals division is the leading provider of solutions that improve placement, pumping, finishing, appearance and performance characteristics of specialty concrete used in the ready-mixed, precast, manufactured concrete products, underground construction and paving markets. For over 100 years we have offered reliable products and innovative technologies, and through the Master Builders Solutions brand, we are connected globally with experts from many fields to provide sustainable solutions for the construction industry.
Limited Warranty NoticeBASF warrants this product to be free from manufacturing defects and to meet the technical properties on the current Technical Data Guide, if used as directed within shelf life. Satisfactory results depend not only on quality products but also upon many factors beyond our control. BASF MAKES NO OTHER WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO ITS PRODUCTS. The sole and exclusive remedy of Purchaser for any claim concerning this product, including but not limited to, claims alleging breach of warranty, negligence, strict liability or otherwise, is shipment to purchaser of product equal to the amount of product that fails to meet this warranty or refund of the original purchase price of product that fails to meet this warranty, at the sole option of BASF. Any claims concerning this product must be received in writing within one (1) year from the date of shipment and any claims not presented within that period are waived by Purchaser. BASF WILL NOT BE RESPONSIBLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST PROFITS) OR PUNITIVE DAMAGES OF ANY KIND.
Purchaser must determine the suitability of the products for the intended use and assumes all risks and liabilities in connection therewith. This information and all further technical advice are based on BASF’s present knowledge and experience. However, BASF assumes no liability for providing such information and advice including the extent to which such information and advice may relate to existing third party intellectual property rights, especially patent rights, nor shall any legal relationship be created by or arise from the provision of such information and advice. BASF reserves the right to make any changes according to technological progress or further developments. The Purchaser of the Product(s) must test the product(s) for suitability for the intended application and purpose before proceeding with a full application of the product(s). Performance of the product described herein should be verified by testing and carried out by qualified experts.
MasterColor
* RHEOCOLOR L became MasterColor under the Master Builders Solutions brand, effective January 1, 2014.
© BASF Corporation 2015 � 01/15 � COL-DAT-0463
BASF CorporationAdmixture Systemswww.master-builders-solutions.basf.us
United States 23700 Chagrin Boulevard Cleveland, Ohio 44122-5544 Tel: 800 628-9990 � Fax: 216 839-8821
Canada 1800 Clark Boulevard Brampton, Ontario L6T 4M7 Tel: 800 387-5862 � Fax: 905 792-0651 page 3 of 3
