Weighing and overload solutions

WEIGHING & OVERLOAD SYSTEMS FOR HOISTS AND CRANES

• Vetec Weighing & Radio Technology

- Company information

• Product Overview

- Introduction to the products

• Product Specifications & Examples

- Detailed information about the products

and real-life examples.

Table of Contents

Vetec ApS was established in 2004, under the Nord-Tech Holding Group,

in order to meet the growing demand for high quality load cells.

Nord Tech Holding Group

Vetec

www.vetec.dk

100% owned

Nord Tech

www.nord-tech.dk

100% owned

Vetec Asia Pacific

Pte. Ltd.

Vetec Weighing & Radio Technology

COMPANY STRUCTURE

MISSION To provide industries world-wide with high quality weighing solutions based on

the industry and customer requirements of high productivity and workplace

safety.

VISION To become a leading international supplier of high quality weighing solutions.

To be known as a knowledge-based and flexible organization with focus on

product development and the technical expertise of our employees and

partners world-wide.

Vetec Weighing & Radio Technology

Vetec’s products are developed by in-house

specialists in cooperation with crane companies.

Vetec technicians provide sales, support, repair

and calibration services.

Vetec Weighing & Radio Technology

IN-HOUSE DEVELOPMENT, PRODUCTION & SERVICE

• EUROPE • ASIA • NORTH AMR. • SOUTH AMR.

• Sweden

• Norway

• Holland

• Germany

• Hungary

• Singapore

• S. Korea

• Thailand

• China

• Ohio

• Quebec

• São

Paulo

• Egypt

• Dubai

VETEC ASIA PACIFIC PTE. LTD.

In 2010, Vetec opened a wholly owned subsidiary in Singapore. The office is

responsible for sales and technical support in Asia Pacific.

• MIDDLE EAST

Vetec Weighing & Radio Technology

WORLD-WIDE REPRESENTATION

It is imperative that Vetec’s partners hold

strong product knowledge and provide an

optimal technical support and service.

Vetec Weighing & Radio Technology

TRAINING OF INTERNATIONAL PARTNERS

• STANDARD PRODUCTS

• Dynamometer

• Mechanical Overload Switch

• Electronic Weighing & Overload System

• Load Pins

Product Overview

DANISH DEVELOPMENT AND MANUFACTURING

• CUSTOMIZED SOLUTIONS

• FULL WEIGHING SOLUTIONS

Developed according to customer demands for diverse applications

• Load Cells

COMBINED WITH:

• Displays

• Remote Controls

Product Overview

DANISH DEVELOPMENT AND MANUFACTURING

All products can be adapted to customer

requirements

• STOCK HOLDING • NON STOCK HOLDING • CUSTOMIZED SOLUTIONS

• Dynamometer

• Weighing & Overload System

• Mechanical Overload Switch

• Amplifier

• Remote Controls

• Displays

• Standard products

• Fixed prices

• Delivery time: 5-7 weeks

• Ask for quote

• Load Pins

• Shackle Pins

• Delivery time: 2-3 weeks

• Ask for quote

• Bellows Bending Beam

• ET Stainless Series

• Bolt-on

• Clamp-On Series

• Pressure Transducer

• Low Profile

• S Cell

• Comp Cell

• Annular Load Cell

• Tension Cell

Product Overview

VETEC WEIGHING SOLUTIONS

Vetec’s products are in general manufactured in relation to EN 13980 safety

standards and can be certified to ATEX.

Vetec solutions are supplied with cerfications,

datasheets and user guides.

Product Overview

CERTIFICATIONS & WARRANTIES

• Accuracy higher than 0,2 % FS.

• Very clear red digit LED display / Visible at long distances and in bright daylight.

• High strength steel / Compact size.

• Silver chrome plated surface.

• Fully serviceable parts.

• Built-in rechargeable batteries.

• Very easy to use.

Capacity: 2t to 120t. Available ex. Stock (DK).

Product Specifications & Examples

ACCESSORY OPTIONS

• Handheld display (2008-6V-RTX).

• PC datalog software (Dynalog).

(Delivered in 100% waterproof carry case)

VETEC – DYNAMOMETER (D2000A)

Product Specifications & Examples

VETEC – DYNAMOMETER (D2000A)

• Accuracy down to 0,1% & overload protection.

• Stainless steel construction.

• Sealed to IP67.

• Easy to install / Retrofit.

• Low deflection.

• Can be Atex certified.

Capacity: 0,1t to 1000t. Designed for customers requirements.

ACCESSORY OPTIONS

• Amplifier (OL3000 w/relays).

• Remote control (Tiger system).

• Display (built-in intensifier as option).

VETEC – LOAD PINS

Product Specifications & Examples

Load pin mounted on a hoist to show the weight on a display or a remote control.

Load Pin

VETEC – LOAD PINS

Product Specifications & Examples

1000kg load pin mounted on a hoist to show the weight on displays.

Load Pin

VETEC – LOAD PINS

Product Specifications & Examples

Load Pin mounted for increased lifting height

Small Load Pin

Load Pin dismounted

VETEC – LOAD PINS

Product Specifications & Examples

• Accuracy ±1 FS (electronic linearised).

• Minimal lifting height reduction / Compact size (down to 100mm length).

• Clamp-on / Does not affect the crane’s mechanical construction.

• Quick and easy to install.

• Mounted on the dead end of the wire rope.

• 6-30 mm wire.

Capacity: Up to 10t. on unit x reevings for crane capacity.

Available ex. Stock (DK).

ACCESSORY OPTIONS

• Amplifier (OL3000 w/relays).

• Remote control (Tiger system).

• Display (built-in amplifier as option).

Product Specifications & Examples

VETEC – WEIGHING AND OVERLOAD SYSTEM (WT1-N & WT2-N)

WT1-N

WTN-1 • OL3000 amplifier • Display

Product Specifications & Examples

VETEC – WEIGHING AND OVERLOAD SYSTEM (WT1-N & WT2-N)

• Minimal lifting height reduction / Very compact size (only 150mm lenght).

• Quick and precise installation with simple tools.

• See visually when the switch is adjusted correctly.

• Mounted on the dead-end of the wire rope.

• Hysterese max 4 % FS.

• 5-30 mm wire.

• Option: 2 limit switches.

The same model can be adjusted to fit different wire-sizes and capacities.

Available ex. Stock (DK).

Product Specifications & Examples

VETEC – MECHANICAL OVERLOAD SWITCH (SM4067-N)

Product Specifications & Examples

VETEC – MECHANICAL OVERLOAD SWITCH (SM4067-N)

• Heavy duty models up to 100 mm Ø.

• Custom options available.

• Payout monitoring options.

• Quick and easy installation.

• No special equiment required.

Product Specifications & Examples

VETEC – RUNNING LINE TENSIOMETER

Product Specifications & Examples

VETEC – RUNNING LINE TENSIOMETER

ELECTRONIC WEIGHING AND OVERLOAD SENSOR - STAINLESS STEEL

• Accuracy ±1 FS (electronic linearised).

• Minimal lifting height reduction / Compact size (down to 100mm length).

• Clamp-on / Does not affect the crane’s mechanical construction.

• Quick and easy installation.

Capacity: 10t. on unit x reevings for crane capacity.

DYNAMOMETER WITH HANDHELD DISPLAY

• Aluminium / Compact size.

• The surface is treated with eloxed aluminum.

• Waterproofed to IP66. IP67 as option

• Option: Wireless solution.

Capacity: 1t. To 500t.

Product Specifications & Examples

VETEC – OFFSHORE SOLUTIONS

Load pins for quick releases

Product Specifications & Examples

VETEC – OFFSHORE SOLUTIONS

• The software is delivered on a small USB stick.

• Accuracy 0,2% ±1 digit

• IP67

• Entry of multiple data

• Records data in csv file. Easy to export to Excel

• The data can be displayed as a graph or a table

• Quick and easy to install and use.

• Available in English and German

FULL WEIGING SOLUTION

• Dynamometer (D2000A)

• Handheld Display (2008-6V-RTX)

Product Specifications & Examples

DYNALOG – PC DATALOG SOFTWARE

VETEC D1002- D1012 VETEC P1001

JAGUAR TIGER JOYSTICK MIDI JOYSTICK TIGER

VETEC - STANDARD DISPLAYS

VETEC - RADIO SOLUTIONS THAT APPLIE TO VETEC WEIGHING SYSTEMS

(Remote controls are not sold seperately)

Product Specifications & Examples

VETEC – DISPLAYS & RADIOS

2x WT2-N • 2x OL3000 Amplifier • OL3000sum Amplifier • 3x Display

Product Specifications & Examples

VETEC – DUAL LIFTING

57t dual lifting

Product Specifications & Examples

VETEC – DUAL LIFTING

WEIGHING SYSTEM FOR TRUCKS

Vetec’s weighing solution for trucks makes it possible to unload

with high accuracy and fully avoid the costly and time-consuming

drive after a weigh bridge.

THE SYSTEM CONSISTS OF

• Load cells, 6 x chassis mount cells.

• Junction box, gathers the load cell signals.

• Display or printer placed in the cab.

NOTE: The weight can also be viewed on a remote control with

two-way communication that also controls the trucks

pump/suction system.

Load Pin

Display Load Cell

FEATURES

• Significant time savings, makes weigh bridge

unnecessary.

• Safe and accurate system (within 50-100kg.).

• Easy to install and operate.

• Especially suitable for vrac.

• The customer receives the right amount.

• Avoid overload. Photo: Albjerg’s Maskintec A/S

Product Specifications & Examples

VETEC – TRANSPORT INDUSTRY

DESCRIPTION

Vetec’s special developed Scrap System is a simple and easily managable

system that gives an exact overview of the scrap load.

After loading the truck driver prints a bon containing date, time and a list of

every single load as well as the overall scrap load.

SYSTEM CONSISTS OF

• A load Pin mounted in the crane

• Small printer with display placed in the cab

The load pin has a robust construction and a range from 5t to 250t.

FEATURES

• Easy installation

• Easy to determine the exact load of the truck.

• Prevents the truck form overloading

• Weighing of the truck is unnessesary

• Saves time and money

Printer

Load Pin

Product Specifications & Examples

VETEC – SCRAP INDUSTRY