Upload
vetec-as
View
198
Download
1
Embed Size (px)
Citation preview
WEIGHING & OVERLOAD SYSTEMS FOR HOISTS AND CRANES
• Vetec Weighing & Radio Technology
- Company information
• Product Overview
- Introduction to the products
• Product Specifications & Examples
- Detailed information about the products
and real-life examples.
Table of Contents
Vetec ApS was established in 2004, under the Nord-Tech Holding Group,
in order to meet the growing demand for high quality load cells.
Nord Tech Holding Group
Vetec
www.vetec.dk
100% owned
Nord Tech
www.nord-tech.dk
100% owned
Vetec Asia Pacific
Pte. Ltd.
Vetec Weighing & Radio Technology
COMPANY STRUCTURE
MISSION To provide industries world-wide with high quality weighing solutions based on
the industry and customer requirements of high productivity and workplace
safety.
VISION To become a leading international supplier of high quality weighing solutions.
To be known as a knowledge-based and flexible organization with focus on
product development and the technical expertise of our employees and
partners world-wide.
Vetec Weighing & Radio Technology
Vetec’s products are developed by in-house
specialists in cooperation with crane companies.
Vetec technicians provide sales, support, repair
and calibration services.
Vetec Weighing & Radio Technology
IN-HOUSE DEVELOPMENT, PRODUCTION & SERVICE
• EUROPE • ASIA • NORTH AMR. • SOUTH AMR.
• Sweden
• Norway
• Holland
• Germany
• Hungary
• Singapore
• S. Korea
• Thailand
• China
• Ohio
• Quebec
• São
Paulo
• Egypt
• Dubai
VETEC ASIA PACIFIC PTE. LTD.
In 2010, Vetec opened a wholly owned subsidiary in Singapore. The office is
responsible for sales and technical support in Asia Pacific.
• MIDDLE EAST
Vetec Weighing & Radio Technology
WORLD-WIDE REPRESENTATION
It is imperative that Vetec’s partners hold
strong product knowledge and provide an
optimal technical support and service.
Vetec Weighing & Radio Technology
TRAINING OF INTERNATIONAL PARTNERS
• STANDARD PRODUCTS
• Dynamometer
• Mechanical Overload Switch
• Electronic Weighing & Overload System
• Load Pins
Product Overview
DANISH DEVELOPMENT AND MANUFACTURING
• CUSTOMIZED SOLUTIONS
• FULL WEIGHING SOLUTIONS
Developed according to customer demands for diverse applications
• Load Cells
COMBINED WITH:
• Displays
• Remote Controls
Product Overview
DANISH DEVELOPMENT AND MANUFACTURING
All products can be adapted to customer
requirements
• STOCK HOLDING • NON STOCK HOLDING • CUSTOMIZED SOLUTIONS
• Dynamometer
• Weighing & Overload System
• Mechanical Overload Switch
• Amplifier
• Remote Controls
• Displays
• Standard products
• Fixed prices
• Delivery time: 5-7 weeks
• Ask for quote
• Load Pins
• Shackle Pins
• Delivery time: 2-3 weeks
• Ask for quote
• Bellows Bending Beam
• ET Stainless Series
• Bolt-on
• Clamp-On Series
• Pressure Transducer
• Low Profile
• S Cell
• Comp Cell
• Annular Load Cell
• Tension Cell
Product Overview
VETEC WEIGHING SOLUTIONS
Vetec’s products are in general manufactured in relation to EN 13980 safety
standards and can be certified to ATEX.
Vetec solutions are supplied with cerfications,
datasheets and user guides.
Product Overview
CERTIFICATIONS & WARRANTIES
• Accuracy higher than 0,2 % FS.
• Very clear red digit LED display / Visible at long distances and in bright daylight.
• High strength steel / Compact size.
• Silver chrome plated surface.
• Fully serviceable parts.
• Built-in rechargeable batteries.
• Very easy to use.
Capacity: 2t to 120t. Available ex. Stock (DK).
Product Specifications & Examples
ACCESSORY OPTIONS
• Handheld display (2008-6V-RTX).
• PC datalog software (Dynalog).
(Delivered in 100% waterproof carry case)
VETEC – DYNAMOMETER (D2000A)
Product Specifications & Examples
VETEC – DYNAMOMETER (D2000A)
• Accuracy down to 0,1% & overload protection.
• Stainless steel construction.
• Sealed to IP67.
• Easy to install / Retrofit.
• Low deflection.
• Can be Atex certified.
Capacity: 0,1t to 1000t. Designed for customers requirements.
ACCESSORY OPTIONS
• Amplifier (OL3000 w/relays).
• Remote control (Tiger system).
• Display (built-in intensifier as option).
VETEC – LOAD PINS
Product Specifications & Examples
Load pin mounted on a hoist to show the weight on a display or a remote control.
Load Pin
VETEC – LOAD PINS
Product Specifications & Examples
1000kg load pin mounted on a hoist to show the weight on displays.
Load Pin
VETEC – LOAD PINS
Product Specifications & Examples
Load Pin mounted for increased lifting height
Small Load Pin
Load Pin dismounted
VETEC – LOAD PINS
Product Specifications & Examples
• Accuracy ±1 FS (electronic linearised).
• Minimal lifting height reduction / Compact size (down to 100mm length).
• Clamp-on / Does not affect the crane’s mechanical construction.
• Quick and easy to install.
• Mounted on the dead end of the wire rope.
• 6-30 mm wire.
Capacity: Up to 10t. on unit x reevings for crane capacity.
Available ex. Stock (DK).
ACCESSORY OPTIONS
• Amplifier (OL3000 w/relays).
• Remote control (Tiger system).
• Display (built-in amplifier as option).
Product Specifications & Examples
VETEC – WEIGHING AND OVERLOAD SYSTEM (WT1-N & WT2-N)
WT1-N
WTN-1 • OL3000 amplifier • Display
Product Specifications & Examples
VETEC – WEIGHING AND OVERLOAD SYSTEM (WT1-N & WT2-N)
• Minimal lifting height reduction / Very compact size (only 150mm lenght).
• Quick and precise installation with simple tools.
• See visually when the switch is adjusted correctly.
• Mounted on the dead-end of the wire rope.
• Hysterese max 4 % FS.
• 5-30 mm wire.
• Option: 2 limit switches.
The same model can be adjusted to fit different wire-sizes and capacities.
Available ex. Stock (DK).
Product Specifications & Examples
VETEC – MECHANICAL OVERLOAD SWITCH (SM4067-N)
Product Specifications & Examples
VETEC – MECHANICAL OVERLOAD SWITCH (SM4067-N)
• Heavy duty models up to 100 mm Ø.
• Custom options available.
• Payout monitoring options.
• Quick and easy installation.
• No special equiment required.
Product Specifications & Examples
VETEC – RUNNING LINE TENSIOMETER
Product Specifications & Examples
VETEC – RUNNING LINE TENSIOMETER
ELECTRONIC WEIGHING AND OVERLOAD SENSOR - STAINLESS STEEL
• Accuracy ±1 FS (electronic linearised).
• Minimal lifting height reduction / Compact size (down to 100mm length).
• Clamp-on / Does not affect the crane’s mechanical construction.
• Quick and easy installation.
Capacity: 10t. on unit x reevings for crane capacity.
DYNAMOMETER WITH HANDHELD DISPLAY
• Aluminium / Compact size.
• The surface is treated with eloxed aluminum.
• Waterproofed to IP66. IP67 as option
• Option: Wireless solution.
Capacity: 1t. To 500t.
Product Specifications & Examples
VETEC – OFFSHORE SOLUTIONS
Load pins for quick releases
Product Specifications & Examples
VETEC – OFFSHORE SOLUTIONS
• The software is delivered on a small USB stick.
• Accuracy 0,2% ±1 digit
• IP67
• Entry of multiple data
• Records data in csv file. Easy to export to Excel
• The data can be displayed as a graph or a table
• Quick and easy to install and use.
• Available in English and German
FULL WEIGING SOLUTION
• Dynamometer (D2000A)
• Handheld Display (2008-6V-RTX)
Product Specifications & Examples
DYNALOG – PC DATALOG SOFTWARE
VETEC D1002- D1012 VETEC P1001
JAGUAR TIGER JOYSTICK MIDI JOYSTICK TIGER
VETEC - STANDARD DISPLAYS
VETEC - RADIO SOLUTIONS THAT APPLIE TO VETEC WEIGHING SYSTEMS
(Remote controls are not sold seperately)
Product Specifications & Examples
VETEC – DISPLAYS & RADIOS
2x WT2-N • 2x OL3000 Amplifier • OL3000sum Amplifier • 3x Display
Product Specifications & Examples
VETEC – DUAL LIFTING
57t dual lifting
Product Specifications & Examples
VETEC – DUAL LIFTING
WEIGHING SYSTEM FOR TRUCKS
Vetec’s weighing solution for trucks makes it possible to unload
with high accuracy and fully avoid the costly and time-consuming
drive after a weigh bridge.
THE SYSTEM CONSISTS OF
• Load cells, 6 x chassis mount cells.
• Junction box, gathers the load cell signals.
• Display or printer placed in the cab.
NOTE: The weight can also be viewed on a remote control with
two-way communication that also controls the trucks
pump/suction system.
Load Pin
Display Load Cell
FEATURES
• Significant time savings, makes weigh bridge
unnecessary.
• Safe and accurate system (within 50-100kg.).
• Easy to install and operate.
• Especially suitable for vrac.
• The customer receives the right amount.
• Avoid overload. Photo: Albjerg’s Maskintec A/S
Product Specifications & Examples
VETEC – TRANSPORT INDUSTRY
DESCRIPTION
Vetec’s special developed Scrap System is a simple and easily managable
system that gives an exact overview of the scrap load.
After loading the truck driver prints a bon containing date, time and a list of
every single load as well as the overall scrap load.
SYSTEM CONSISTS OF
• A load Pin mounted in the crane
• Small printer with display placed in the cab
The load pin has a robust construction and a range from 5t to 250t.
FEATURES
• Easy installation
• Easy to determine the exact load of the truck.
• Prevents the truck form overloading
• Weighing of the truck is unnessesary
• Saves time and money
Printer
Load Pin
Product Specifications & Examples
VETEC – SCRAP INDUSTRY