Using a CNC Plasma Cutter | CNC Plasma Cutting

Using a CNC Plasma Cutter By Wasp Supplies Ltd

If you own a low cost CNC plasma cutter you can produce your own profiles in minutes.

Our software is very easy to use !

The first stage of producing a cut profile is to create a CAD digital image called a DXF file.

This is generally sent electronically to a sub contractor to produce the components on your behalf .

Using our easy to use software simply import the dxf file from its saved location.

We give you the option to import a dxf file or just add your own dimensions to our 80 component parametric shape library

We can also give you the option to either cut or etch the profile .

Select how many components, what material and how thick the material is

If you want to include another shape repeat the import process .

Our software generates a data sheet, showing the correct consumables to use, as well as material usage, scrap, and plasma cutting times.

1 click to generate machine code called a tap fileThat is the design over in minutes

Using the Pre Installed Mach III software load the tap file Make sure your material is loaded on the table bed, the correct plasma

materials are installed.Hit “ RUN “ and start cutting !

Stand back and watch the profile being produced

Remove clean and ready to use in 10 minutes Save the job for future use

For more details see the complete range here