TECNOTEST Via Enrico De Nicola, 31 - 41122 MODENA, Italy

TECNOTEST Via Enrico De Nicola, 31 - 41122 MODENA, Italy - Tel. +39 059 25.20.25 - Fax +39 059 25.38.48 - www.tecnotest.it - tecnotest@tecnotest.it

The special characteristic of the machine consists in its 6 speeds

(pre-set and ranging from 0.6 to 50.8 mm/min.).

Speed change is made via keyboard.

It is possible to set intermediate speeds beyond those ones

already pre-set.

Particularly suitable for the following tests (see table): Marshall,

Hubbard-Field, CBR (ASTM e BS), Unconfined.

TEST PiSTon SPEEd marshall 2”/min. (50.8 mm)

hubbard-field 1”/min. (25.4 mm)

c.b.r. (astm) 0.05”/min. (1.27 mm)

c.b.r. (bs) 1 mm/min.

unconfined 0.025”/min. (0.635 mm)

The machine can also be used for other tests.

T 051/B65 50 kN VARIABLE SPEED MACHINE (6 SPEEDS)STandardS: BS 598, ASTM D 1559, cnr 30, En 12697-12, En 12697-34, AASHTO T 245

SPECiFiCaTionSsPeeds 0,635 - 1 - 1,27 - 5 - 25,4 - 50,8 mm/min

maX Vertical sPan 600 mm

min Vertical sPan 100 mm

horizontal sPan 380 mm

ram traVel 100 mm

PoWer suPPlY 220 V, 50 Hz, monofase, 750 W

dimensions 535 x 515 x 1240 (h) mm

In the picture:• T 051/B65 testing machine• BB 050 proving ring• BA 201 load penetration piston• B 005/A bracket for dial gauge• T 628/E1 dial gauge• B 005/T Marshall breaking head

new