View
0
Download
0
Category
Preview:
Citation preview
1
SX
Ra
nge
2
BP
G R
ange
3
BP
GA
Ra
nge
4
ZA
G R
ange
5
Hig
h V
olta
ge
6 F
ire R
ated
7
ZP
Ran
ge
8
Oth
ers
9
Tec
hnic
al
Stainless Steel and Mild Steel Enclosures
SX
Further details on this range of
enclosures can be found at;
www.ab-tech.co.uk/sx.htm
Stainless Steel and Mild Steel Enclosures
1
SX
Ra
nge
SX
8
The SX range comprises 14 sizes of enclosure manufactured in either mild steel or stainless steel. 11 sizes are available in depths of 140 or 200mm and 8 sizes are available in depths of 140, 200 or 300mm. The majority of the range can be fitted with removable gland plates on any or all of the four sides. The mild steel version (MSX) is available with a number of paint options (most RAL colours are available) and anti-corrosion finishes. Further advice on surface finishes can be sought from the ABTECH sales office.
The stainless steel range (SSX) is manufactured in 316 grade stainless steel to give the maximum environmental protection. The main body is manufactured from 2mm thick sheet and the mounting straps and gland plates from 3mm thick plate. Cable entries can be drilled in the enclosure door or sides or through the gland plates, if fitted. Entries may also be drilled through the rear face of the enclosure (EEx’e’ versions also.) Another important feature of the SX range is the hinged, lift-off door, which is held to the enclosure by at least 4 captive stainless steel screws, which also maintain the correct compression on the gasket. The hinges are solid block, machined oversize to enable the screws to control the closing of the door, not the hinge, its only function being to support the door when opened. The hinges allow easy removal of the door with only minimal opening required before removal (less than 10°).
Earthing is accomplished by means of an Internal / external earth stud fitted as standard which can be connected to the terminal mounting rail or component mounting plate. Optionally, earth studs can be fitted to the door and gland plates. Rail mounted earth terminals or proprietary earth bars can be fitted inside the enclosure and ABTECH Sales staff will be happy to advise on this. When fitted with a standard neoprene gasket, the enclosure is suitable for ambient temperatures of - 40°C to + 80°C (-40°F to +176°F). Alternatively, when fitted with an optional silicone gasket the temperature range is increased to - 70°C to + 130°C (-94°F to +266°F). The SX range of enclosures are suitable for use in hazardous areas and can be supplied with a number of certificates. ATEX EEx‘e’ to BS EN 50019 (Zone 1 & 2) EEx‘nA’ to BS EN50021 (Zone 2) and NEMA 4X (CSA, UL & FM class 1, div 2) and GOST.
The SX range can be supplied fitted with any component approved terminal to apparatus level or can be supplied empty as component approved for the clients own certification requirements.
Stainless Steel and Mild Steel Enclosures
1
SX
Ra
nge
2
BP
G R
ange
3
BP
GA
Ra
nge
4
ZA
G R
ange
5
Hig
h V
olta
ge
6 F
ire R
ated
7
ZP
Ran
ge
8
O
ther
s
9
Tec
hnic
al
SX
9
SX Range Features
• Wide Operating Temperature (- 70°C to + 175°C) (-94°F to +347°F) • Ingress Protection up to IP68 • Fire Resistant to IEC331 • Impact Resistant > 10 Nm • Corrosion Resistant • Gland plates can be fitted to any or all
four sides (size SX66 and above)
• Certification for use in Zone 1 and 2 • UL, CSA, IECEx, ATEX, FM, InMetro and GOST Approvals • Ideal for Petrochemical and Marine
applications
Other applications include junction boxes, both industrial and hazardous area, OEM applications, fire protection systems, tunnel wiring, IP68 applications, etc. A video demonstrating the main features of the SX range is available on our website, please visit www.ab-tech.co.uk/sx.htm
The SX range was specifically designed to meet the rigours of the North Sea environment and is capable of achieving IP66 and IP67. It has also undergone and passed the Shell/ERA deluge test which was devised to adequately test enclosures and electrical equipment which is routinely subjected to ships deck conditions or fire deluge systems. IP68 enclosures are also available for depths up to 120 ft to special order. Further information on submersible enclosures is available in Section 8 of this catalogue.
The SX range has many features which lend itself to a wide variety applications, not least of which is the ability to be constructed to almost any dimension due to its fabricated nature. This can also be applied to EEx‘e’ enclosures where the certification allows oversize enclosures to be manufactured whilst retaining the next smallest sized enclosure’s power rating. The SX range is also suitable for fire resistance applications and when fitted with ceramic terminals meets the requirements of IEC 331 (750°C (1382°F) for 3 hours) and also BS6387/1983 (950°C (1742°F) for 3 hours). Further details are available in Section 6 of this catalogue.
Stainless Steel and Mild Steel Enclosures
1
SX
Ra
nge
SX
10
Accessories and Options
The following table is a list of the available accessories suitable for particular standard sizes of SX enclosures. Care should be taken when ordering accessories for use with enclosures intended for hazardous areas to ensure that compliance with certification is retained.
Par
t Num
ber
(see
not
e 1)
Wid
th (
mm
) (s
ee n
ote
2)
Hei
ght (
mm
) (s
ee n
ote
2)
Dep
th (
mm
) (s
ee n
ote
2)
140m
m D
epth
200m
m D
epth
300m
m D
epth
Gla
nd P
late
s
(on
any
or a
ll fo
ur s
ides
)
EP
– E
lect
ro-p
olis
hed
exte
rnal
su
rfac
es (
SX
ran
ge o
nly)
LB
- L
abel
Bra
cket
Wel
ded
to
Doo
r
ES
- E
arth
Stu
d fit
ted
to D
oor
and
Gla
nd P
late
s
EB
- In
tern
al E
arth
ing
Bar
SIL
- S
ilico
ne G
aske
t (s
ee n
ote
3)
BD
- B
reat
her
Dra
in
(see
not
e 4)
TP
- T
ampe
r P
roof
Lid
Fix
ing
Scr
ews
MP
- C
ompo
nent
Mou
ntin
g P
late
(S
teel
/Sta
inle
ss S
teel
)
RF
– R
FI P
rote
ctio
n (s
ee n
ote
5)
SX45 114 114 51 � � � � � � � � � � � � �
SX64 102 152 63 � � � � � � � � � � � � �
SX66 152 152 102 � � � � � � � � � � � � �
SX0 152 229 - � � � � � � � � � � � � �
SX0.5 184 274 - � � � � � � � � � � � � �
SX1 234 324 - � � � � � � � � � � � � �
SX1.5 306 306 - � � � � � � � � � � � � �
SX2 372 324 - � � � � � � � � � � � � �
SX3 372 448 - � � � � � � � � � � � � �
SX4 372 510 - � � � � � � � � � � � � �
SX5 510 510 - � � � � � � � � � � � � �
SX6 510 780 - � � � � � � � � � � � � �
SX7 650 950 - � � � � � � � � � � � � �
SX8 800 1250 - � � � � � � � � � � � � �
1. The range is available either in stainless steel 316 (SX variants) or mild steel (MSX variants). 2. Manufacturing tolerances are +/- 3mm on overall dimensions and +/-0.5mm on fixing hole centres. 3. Silicone gasket increases temperature rating (-70º to +175º C) (-94°F to +347°F) and may increase working life in some applications. 4. Breather drain available in IP66 stainless steel or plastic. 5. Radio Frequency Interference (RFI) gasket may reduce IP rating.
Ordering Example;
SX1.5 300 4GP LB EB (Stainless Steel SX1.5 300mm deep, 4 gland plates, label bracket on door and internal earthing bar)
Stainless Steel and Mild Steel Enclosures
1
SX
Ra
nge
2
BP
G R
ange
3
BP
GA
Ra
nge
4
ZA
G R
ange
5
Hig
h V
olta
ge
6 F
ire R
ated
7
ZP
Ran
ge
8
O
ther
s
9
Tec
hnic
al
SX
11
Full width, full height Gland Plates (can be fitted to any or all sides)
Earth Stud fitted to door and gland plates
Label Bracket (welded to door)
Electro-polished (external surfaces on SX range only)
Internal Earthing bar (can be fitted with clamps)
Component Mounting Plate (steel or stainless steel 316)
We also supply cable glands, stopping plugs, breather drains and continuity plates. Please contact us for further details.
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range S
X
12
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
MSX 45 / SSX 45 Drawing
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range 2
BPG Range 3
BPGA Range 4
ZAG Range 5
High Voltage 6 Fire Rated
7
ZP Range 8
Others 9
Technical SX
13
114mm
114mm
51mm
Mild steel
Stainless steel 316 (1.4404)
1200g
66 or 67
-40º to 80º C (-40°F to +176°F) (standard neoprene gasket)
-70º to 130º C (-94°F to +266°F) (silicone gasket)
ATEX EEx e (Zone 1 & Zone 2) BS EN 60079-7
ATEX EEx nA (Zone 2) BS EN 60079-15
ATEX EEx nR (Zone 2) BS EN 60079-15
CSA - Ex e (Class 1 Zone 1 & Zone2)
FM - AEx e (Class 1 Zone 1 & Zone2)
GOST-R Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) (class 1 division 2)
8.0W
MSX 45 / SSX 45 Specifications
Width
Length
Depth
Material
Weight
IP Rating
Temperature
Certification
Power Rating
1
8
0
7
7
0
0
0
0
0
8
0
7
4
1
1
1
1
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691
283-691
285-691
280-998
281-998
264-120
264-220
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
7
7
5
4
3
0
0
0
0
0
0
0
9
9
7
4
3
0
Terminal Populations Maximum Number of Rows
Weidmuller
SAK 2.5
SAK 4
SAK 6
SAK 10 *
SAK 16 *
SAK 35
SAK 70
WDU 2.5
WDU 4
WDU 6
WDU 10
WDU 16
Phoenix
UK 2.5 N
UK 3 N
UK 5 N
UK 10 N *
UK 16 N *
UK 35 N
* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.
Side B-D
4
2
2
0
0
Side A-C
4
2
2
0
0
Cable Gland Entry Matrix Entry Size
M16
M20
M25
M32
M40
Example
114 x 51mm
114 x 51mm
Drilling Envelope
Side A-C
Side B-D
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range S
X
14
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
MSX 64 / SSX 64 Drawing
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range 2
BPG Range 3
BPGA Range 4
ZAG Range 5
High Voltage 6 Fire Rated
7
ZP Range 8
Others 9
Technical SX
15
Side B-D
8
4
3
2
0
Side A-C
6
3
2
1
0
Cable Gland Entry Matrix Entry Size
M16
M20
M25
M32
M40
102 x 63mm
152 x 63mm
Drilling Envelope Side A-C
Side B-D
102mm
152mm
63mm
Mild steel
Stainless steel 316 (1.4404)
1500g
66 or 67
-40º to 80º C (-40°F to +176°F) (standard neoprene gasket)
-70º to 130º C (-94°F to +266°F) (silicone gasket)
ATEX EEx e (Zone 1 & Zone 2) BS EN 60079-7
ATEX EEx nA (Zone 2) BS EN 60079-15
ATEX EEx nR (Zone 2) BS EN 60079-15
CSA - Ex e (Class 1 Zone 1 & Zone2)
FM - AEx e (Class 1 Zone 1 & Zone2)
GOST-R Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) (class 1 division 2)
10.258W
MSX 64 / SSX 64 Specifications
Width
Length
Depth
Material
Weight
IP Rating
Temperature
Certification
Power Rating
1
18
0
15
15
0
0
0
0
0
18
15
15
9
3
2
3
2
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691
283-691
285-691
280-998
281-998
264-120
264-220
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
15
15
11
9
0
0
0
0
0
0
0
0
17
17
15
9
7
0
Terminal Populations Maximum Number of Rows
Weidmuller
SAK 2.5
SAK 4
SAK 6
SAK 10 *
SAK 16 *
SAK 35
SAK 70
WDU 2.5
WDU 4
WDU 6
WDU 10
WDU 16
Phoenix
UK 2.5 N
UK 3 N
UK 5 N
UK 10 N *
UK 16 N *
UK 35 N
* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.
Example
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range S
X
16
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
MSX 66 / SSX 66 Drawing
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range 2
BPG Range 3
BPGA Range 4
ZAG Range 5
High Voltage 6 Fire Rated
7
ZP Range 8
Others 9
Technical SX
17
Side B-D
14
8
6
3
2
Side A-C
14
8
6
3
2
Cable Gland Entry Matrix Entry Size
M16
M20
M25
M32
M40
152 x 102mm
152 x 102mm
Drilling Envelope
Side A-C
Side B-D
.
152mm
152mm
102mm
Mild steel
Stainless steel 316 (1.4404)
2200g
66 or 67
-40º to 80º C (-40°F to +176°F) (standard neoprene gasket)
-70º to 130º C (-94°F to +266°F) (silicone gasket)
ATEX EEx e (Zone 1 & Zone 2) BS EN 60079-7
ATEX EEx nA (Zone 2) BS EN 60079-15
ATEX EEx nR (Zone 2) BS EN 60079-15
CSA - Ex e (Class 1 Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
GOST-R Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) (class 1 division 2)
14.287W
MSX 66 / SSX 66 Specifications
Width
Length
Depth
Material
Weight
IP Rating
Temperature
Certification
Power Rating
1
18
18
15
15
15
11
10
7
0
18
15
16
10
3
2
3
2
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691
283-691
285-691
280-998
281-998
264-120
264-220
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
15
15
11
9
7
6
0
17
15
11
9
7
17
17
14
9
7
6
Terminal Populations Maximum Number of Rows
Weidmuller
SAK 2.5
SAK 4
SAK 6
SAK 10 *
SAK 16 *
SAK 35 *
SAK 70
WDU 2.5
WDU 4
WDU 6
WDU 10 *
WDU 16 *
Phoenix
UK 2.5 N
UK 3 N
UK 5 N
UK 10 N *
UK 16 N *
UK 35 N *
* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.
Example
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range S
X
18
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
MSX 0 / SSX 0 Drawing
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range 2
BPG Range 3
BPGA Range 4
ZAG Range 5
High Voltage 6 Fire Rated
7
ZP Range 8
Others 9
Technical SX
19
200mm deep 4000g
152mm
229mm
140mm or 200mm
Mild steel
Stainless steel 316 (1.4404)
140mm deep 3200g
66 or 67
-40º to 80º C (-40°F to +176°F) (standard neoprene gasket)
-70º to 130º C (-94°F to +266°F) (silicone gasket)
ATEX EEx e (Zone 1 & Zone 2) BS EN 60079-7
ATEX EEx nA (Zone 2) BS EN 60079-15
ATEX EEx nR (Zone 2) BS EN 60079-15
CSA - Ex e (Class 1 Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
GOST-R Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) (class 1 division 2)
19.874W
MSX 0 / SSX 0 Specifications
Width
Length
Depth
Material
Weight
IP Rating
Temperature
Certification
Power Rating
1
24
24
20
20
20
15
12
0
0
24
20
21
12
4
3
4
3
Wago
280-992
280-999
281-691
281-992
281-993
282-691 *
284-691 *
283-691
285-691
280-998
281-998
264-120
264-220
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
21
19
16
12
10
7
5
25
21
16
12
10
25
25
21
12
10
8
Terminal Populations Maximum Number of Rows
Weidmuller
SAK 2.5
SAK 4
SAK 6
SAK 10 *
SAK 16 *
SAK 35 *
SAK 70 *
WDU 2.5
WDU 4
WDU 6
WDU 10 *
WDU 16 *
Phoenix
UK 2.5 N
UK 3 N
UK 5 N
UK 10 N *
UK 16 N *
UK 35 N *
* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.
200
16
9
6 4
2
200
144
135
Side B-D
140
8
6
3 2
2
Side B-D
140
144
75
200
9
6
4 2
1
200
87
135
Side A-C
140
4
2
1 1
1
Side A-C
140
87
75
Cable Gland Entry Matrix (using standard gland clearances)
Size
M16
M20
M25 M32
M40
Drilling Envelope Size (with glandplate fitted)
Width
Height
Example
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range S
X
20
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
MSX 0.5 / SSX 0.5 Drawing
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range 2
BPG Range 3
BPGA Range 4
ZAG Range 5
High Voltage 6 Fire Rated
7
ZP Range 8
Others 9
Technical SX
21
200mm deep 6000g
184mm
274mm
140mm or 200mm
Mild steel
Stainless steel 316 (1.4404)
140mm deep 5000g
66 or 67
-40º to 80º C (-40°F to +176°F) (standard neoprene gasket)
-70º to 130º C (-94°F to +266°F) (silicone gasket)
ATEX EEx e (Zone 1 & Zone 2) BS EN 60079-7
ATEX EEx nA (Zone 2) BS EN 60079-15
ATEX EEx nR (Zone 2) BS EN 60079-15
CSA - Ex e (Class 1 Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
GOST-R Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) (class 1 division 2)
19.874W
MSX 0.5 / SSX 0.5 Specifications
Width
Length
Depth
Material
Weight
IP Rating
Temperature
Certification
Power Rating
2
31
31
27
27
27
21
16
28
0
31
27
56
32
12
8
12
8
Wago
280-992
280-999
281-691
281-992
281-993
282-691 *
284-691 *
283-691
285-691
280-998
281-998
264-120
264-220
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
56
52
42
34
14
10
7
67
56
42
34
14
68
68
56
34
14
11
Terminal Populations Maximum Number of Rows
Weidmuller
SAK 2.5
SAK 4
SAK 6
SAK 10 *
SAK 16 *
SAK 35 *
SAK 70 *
WDU 2.5
WDU 4
WDU 6
WDU 10 *
WDU 16 *
Phoenix
UK 2.5 N
UK 3 N
UK 5 N
UK 10 N *
UK 16 N *
UK 35 N *
* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.
200
20
12
9 6
4
200
189
135
Side B-D
140
10
8
4 3
2
Side B-D
140
189
75
200
12
9
6 4
2
200
119
135
Side A-C
140
6
4
2 2
1
Side A-C
140
119
75
Cable Gland Entry Matrix (using standard gland clearances)
Size
M16
M20
M25 M32
M40
Drilling Envelope Size (with glandplate fitted)
Width
Height
Example
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range S
X
22
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
MSX 1 / SSX 1 Drawing
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range 2
BPG Range 3
BPGA Range 4
ZAG Range 5
High Voltage 6 Fire Rated
7
ZP Range 8
Others 9
Technical SX
23
200mm deep 7200g
234mm
324mm
140mm or 200mm
Mild steel
Stainless steel 316 (1.4404)
140mm deep 6300g
66 or 67
-40º to 80º C (-40°F to +176°F) (standard neoprene gasket)
-70º to 130º C (-94°F to +266°F) (silicone gasket)
ATEX EEx e (Zone 1 & Zone 2) BS EN 60079-7
ATEX EEx nA (Zone 2) BS EN 60079-15
ATEX EEx nR (Zone 2) BS EN 60079-15
CSA - Ex e (Class 1 Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
GOST-R Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) (class 1 division 2)
29.206W
MSX 1 / SSX 1 Specifications
Width
Length
Depth
Material
Weight
IP Rating
Temperature
Certification
Power Rating
2
41
41
34
34
34
27
21
18
12
41
34
72
42
14
10
14
10
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691 *
283-691 *
285-691 *
280-998
281-998
264-120
264-220
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
72
66
54
44
18
14
10
86
72
54
44
18
86
86
72
44
18
14
Terminal Populations Maximum Number of Rows
Weidmuller
SAK 2.5
SAK 4
SAK 6
SAK 10 *
SAK 16 *
SAK 35 *
SAK 70 *
WDU 2.5
WDU 4
WDU 6
WDU 10 *
WDU 16 *
Phoenix
UK 2.5 N
UK 3 N
UK 5 N
UK 10 N *
UK 16 N *
UK 35 N *
* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.
200
28
18
12 8
6
200
239
135
Side B-D
140
14
10
5 4
3
Side B-D
140
239
75
200
20
12
9 4
2
200
169
135
Side A-C
140
10
6
3 2
2
Side A-C
140
169
75
Cable Gland Entry Matrix (using standard gland clearances)
Size
M16
M20
M25 M32
M40
Drilling Envelope Size (with glandplate fitted)
Width
Height
Example
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range S
X
24
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
MSX 1.5 / SSX 1.5 Drawing
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range 2
BPG Range 3
BPGA Range 4
ZAG Range 5
High Voltage 6 Fire Rated
7
ZP Range 8
Others 9
Technical SX
25
300mm 11.3Kg
200mm 8.8Kg
306mm
306mm
140mm or 200mm
Mild steel
Stainless steel 316 (1.4404)
140mm 7.3Kg
66 or 67
-40º to 80º C (-40°F to +176°F) (standard neoprene gasket)
-70º to 130º C (-94°F to +266°F) (silicone gasket)
ATEX EEx e (Zone 1 & Zone 2) BS EN 60079-7
ATEX EEx nA (Zone 2) BS EN 60079-15
ATEX EEx nR (Zone 2) BS EN 60079-15
CSA - Ex e (Class 1 Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
GOST-R Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) (class 1 division 2)
32.284W
MSX 1.5 / SSX 1.5 Specifications
Width
Length
Depth
Material
Weight
IP Rating
Temperature
Certification
Power Rating
3
74
74
64
64
64
48
38
32
11
74
64
99
60
21
15
21
15
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691 *
283-691 *
285-691 *
280-998
281-998
264-120
264-220
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
99
93
75
60
34
24
20
118
99
75
60
34
120
120
99
60
34
26
Terminal Populations Maximum Number of Rows
Weidmuller
SAK 2.5
SAK 4
SAK 6
SAK 10 *
SAK 16 *
SAK 35 *
SAK 70 *
WDU 2.5
WDU 4
WDU 6
WDU 10 *
WDU 16 *
Phoenix
UK 2.5 N
UK 3 N
UK 5 N
UK 10 N *
UK 16 N *
UK 35 N *
* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.
200
25
16
12 6
4
200
221
135
Side B-D
140
12
10
4 3
3
Side B-D
140
221
75
200
28
18
12 8
6
200
241
135
Side A-C
140
14
10
5 4
3
Side A-C
140
241
75
Cable Gland Entry Matrix (using standard gland clearances)
Size
M16
M20
M25 M32
M40
Drilling Envelope Size (with glandplate fitted)
Width
Height
Example
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range S
X
26
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
MSX 2 / SSX 2 Drawing
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range 2
BPG Range 3
BPGA Range 4
ZAG Range 5
High Voltage 6 Fire Rated
7
ZP Range 8
Others 9
Technical SX
27
300mm 14.3Kg
200mm 11.3Kg
372mm
324mm
140mm or 200mm
Mild steel
Stainless steel 316 (1.4404)
140mm 9.5Kg
66 or 67
-40º to 80º C (-40°F to +176°F) (standard neoprene gasket)
-70º to 130º C (-94°F to +266°F) (silicone gasket)
ATEX EEx e (Zone 1 & Zone 2) BS EN 60079-7
ATEX EEx nA (Zone 2) BS EN 60079-15
ATEX EEx nR (Zone 2) BS EN 60079-15
CSA - Ex e (Class 1 Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
GOST-R Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) (class 1 division 2)
36.500W
MSX 2 / SSX 2 Specifications
Width
Length
Depth
Material
Weight
IP Rating
Temperature
Certification
Power Rating
3
150
150
126
126
84
99
78
44
30
150
126
132
78
27
18
27
18
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691 *
283-691 *
285-691 *
280-998
281-998
264-120
264-220
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
132
123
99
78
66
42
24
158
132
99
78
66
156
156
132
78
66
54
Terminal Populations Maximum Number of Rows
Weidmuller
SAK 2.5
SAK 4
SAK 6
SAK 10
SAK 16
SAK 35
SAK 70
WDU 2.5
WDU 4
WDU 6
WDU 10 *
WDU 16 *
Phoenix
UK 2.5 N
UK 3 N
UK 5 N
UK 10 N
UK 16 N
UK 35 N
* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.
200
28
18
12 8
6
200
239
135
Side B-D
140
14
10
6 4
3
Side B-D
140
239
75
200
36
24
18 10
8
200
307
135
Side A-C
140
18
14
6 5
4
Side A-C
140
307
75
Cable Gland Entry Matrix (using standard gland clearances)
Size
M16
M20
M25 M32
M40
Drilling Envelope Size (with glandplate fitted)
Width
Height
Example
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range S
X
28
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
MSX 3 / SSX 3 Drawing
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range 2
BPG Range 3
BPGA Range 4
ZAG Range 5
High Voltage 6 Fire Rated
7
ZP Range 8
Others 9
Technical SX
29
300mm 16.6Kg
200mm 13.3Kg
372mm
448mm
140mm or 200mm
Mild steel
Stainless steel 316 (1.4404)
140mm 11.3Kg
66 or 67
-40º to 80º C (-40°F to +176°F) (standard neoprene gasket)
-70º to 130º C (-94°F to +266°F) (silicone gasket)
ATEX EEx e (Zone 1 & Zone 2) BS EN 60079-7
ATEX EEx nA (Zone 2) BS EN 60079-15
ATEX EEx nR (Zone 2) BS EN 60079-15
CSA - Ex e (Class 1 Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
GOST-R Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) (class 1 division 2)
42.289W
MSX 3 / SSX 3 Specifications
Width
Length
Depth
Material
Weight
IP Rating
Temperature
Certification
Power Rating
3
189
189
162
162
108
126
99
56
38
189
162
168
99
36
24
36
24
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691 *
283-691 *
285-691 *
280-998
281-998
264-120
264-220
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
168
156
126
102
84
63
45
201
168
126
102
84
201
201
168
102
84
69
Terminal Populations Maximum Number of Rows
Weidmuller
SAK 2.5
SAK 4
SAK 6
SAK 10 *
SAK 16 *
SAK 35 *
SAK 70 *
WDU 2.5
WDU 4
WDU 6
WDU 10 *
WDU 16 *
Phoenix
UK 2.5 N
UK 3 N
UK 5 N
UK 10 N *
UK 16 N *
UK 35 N *
* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.
200
45
28
21 12
8
200
363
135
Side B-D
140
20
16
8 6
5
Side B-D
140
363
75
200
36
24
15 10
8
200
307
135
Side A-C
140
16
12
7 5
4
Side A-C
140
307
75
Cable Gland Entry Matrix (using standard gland clearances)
Size
M16
M20
M25 M32
M40
Drilling Envelope Size (with glandplate fitted)
Width
Height
Example
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range S
X
30
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
MSX 4 / SSX 4 Drawing
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range 2
BPG Range 3
BPGA Range 4
ZAG Range 5
High Voltage 6 Fire Rated
7
ZP Range 8
Others 9
Technical SX
31
300mm 18.3Kg
200mm 14.8Kg
372mm
510mm
140mm or 200mm
Mild steel
Stainless steel 316 (1.4404)
140mm 12.7Kg
66 or 67
-40º to 80º C (-40°F to +176°F) (standard neoprene gasket)
-70º to 130º C (-94°F to +266°F) (silicone gasket)
ATEX EEx e (Zone 1 & Zone 2) BS EN 60079-7
ATEX EEx nA (Zone 2) BS EN 60079-15
ATEX EEx nR (Zone 2) BS EN 60079-15
CSA - Ex e (Class 1 Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
GOST-R Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) (class 1 division 2)
44.726W
MSX 4 / SSX 4 Specifications
Width
Length
Depth
Material
Weight
IP Rating
Temperature
Certification
Power Rating
3
222
222
189
189
126
147
117
66
44
222
189
198
117
42
30
42
30
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691
283-691
285-691
280-998
281-998
264-120
264-220
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
198
183
150
120
99
75
54
237
198
150
120
99
237
237
198
102
99
81
Terminal Populations Maximum Number of Rows
Weidmuller
SAK 2.5
SAK 4
SAK 6
SAK 10
SAK 16
SAK 35
SAK 70
WDU 2.5
WDU 4
WDU 6
WDU 10 *
WDU 16 *
Phoenix
UK 2.5 N
UK 3 N
UK 5 N
UK 10 N
UK 16 N
UK 35 N
* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.
200
52
36
24 14
10
200
425
135
Side B-D
140
26
20
10 7
6
Side B-D
140
425
75
200
36
24
18 10
8
200
307
135
Side A-C
140
18
14
6 5
4
Side A-C
140
307
75
Cable Gland Entry Matrix (using standard gland clearances)
Size
M16
M20
M25 M32
M40
Drilling Envelope Size (with glandplate fitted)
Width
Height
Example
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range S
X
32
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
MSX 5 / SSX 5 Drawing
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range 2
BPG Range 3
BPGA Range 4
ZAG Range 5
High Voltage 6 Fire Rated
7
ZP Range 8
Others 9
Technical SX
33
300mm 25.0Kg
200mm 20.0Kg
510mm
510mm
140mm or 200mm
Mild steel
Stainless steel 316 (1.4404)
140mm 17.0Kg
66 or 67
-40º to 80º C (-40°F to +176°F) (standard neoprene gasket)
-70º to 130º C (-94°F to +266°F) (silicone gasket)
ATEX EEx e (Zone 1 & Zone 2) BS EN 60079-7
ATEX EEx nA (Zone 2) BS EN 60079-15
ATEX EEx nR (Zone 2) BS EN 60079-15
CSA - Ex e (Class 1 Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
GOST-R Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) (class 1 division 2)
50.328W
MSX 5 / SSX 5 Specifications
Width
Length
Depth
Material
Weight
IP Rating
Temperature
Certification
Power Rating
4
296
296
252
252
189
196
156
99
66
296
252
264
156
56
40
56
40
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691
283-691
285-691
280-998
281-998
264-120
264-220
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
264
244
200
160
132
100
72
316
264
200
160
132
316
316
264
160
132
108
Terminal Populations Maximum Number of Rows
Weidmuller
SAK 2.5
SAK 4
SAK 6
SAK 10
SAK 16
SAK 35
SAK 70
WDU 2.5
WDU 4
WDU 6
WDU 10
WDU 16
Phoenix
UK 2.5 N
UK 3 N
UK 5 N
UK 10 N
UK 16 N
UK 35 N
* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.
200
52
36
24 14
10
200
425
135
Side B-D
140
26
20
10 7
6
Side B-D
140
425
75
200
55
36
27 14
12
200
445
135
Side A-C
140
26
20
10 7
6
Side A-C
140
445
75
Cable Gland Entry Matrix (using standard gland clearances)
Size
M16
M20
M25 M32
M40
Drilling Envelope Size (with glandplate fitted)
Width
Height
Example
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range S
X
34
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
MSX 6 / SSX 6 Drawing
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range 2
BPG Range 3
BPGA Range 4
ZAG Range 5
High Voltage 6 Fire Rated
7
ZP Range 8
Others 9
Technical SX
35
300mm 32.0Kg
200mm 27.0Kg
510mm
780mm
140mm or 200mm or 300mm
Mild steel
Stainless steel 316 (1.4404)
140mm 24.0Kg
66 or 67
-40º to 80º C (-40°F to +176°F) (standard neoprene gasket)
-70º to 130º C (-94°F to +266°F) (silicone gasket)
ATEX EEx e (Zone 1 & Zone 2) BS EN 60079-7
ATEX EEx nA (Zone 2) BS EN 60079-15
ATEX EEx nR (Zone 2) BS EN 60079-15
CSA - Ex e (Class 1 Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
GOST-R Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) (class 1 division 2)
57.383W
MSX 6 / SSX 6 Specifications
Width
Length
Depth
Material
Weight
IP Rating
Temperature
Certification
Power Rating
4
496
496
424
424
318
328
264
165
114
496
424
440
264
92
64
92
64
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691
283-691
285-691
280-998
281-998
264-120
264-220
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
440
404
332
264
220
168
120
528
440
332
264
220
524
524
440
264
229
176
Terminal Populations Maximum Number of Rows
Weidmuller
SAK 2.5
SAK 4
SAK 6
SAK 10
SAK 16
SAK 35
SAK 70
WDU 2.5
WDU 4
WDU 6
WDU 10
WDU 16
Phoenix
UK 2.5 N
UK 3 N
UK 5 N
UK 10 N
UK 16 N
UK 35 N
* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.
200
85
60
42 22
18
200
695
135
Side B-D
140
42
34
18 11
10
Side B-D
140
695
75
200
55
36
27 14
12
200
445
135
Side A-C
140
26
20
10 7
6
Side A-C
140
445
75
Cable Gland Entry Matrix (using standard gland clearances)
Size
M16
M20
M25 M32
M40
Drilling Envelope Size (with glandplate fitted)
Width
Height
Example
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range S
X
36
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
MSX 7 / SSX 7 Drawing
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range 2
BPG Range 3
BPGA Range 4
ZAG Range 5
High Voltage 6 Fire Rated
7
ZP Range 8
Others 9
Technical SX
37
300mm 45.0Kg
200mm 39.0Kg
650mm
950mm
140mm or 200mm or 300mm
Mild steel
Stainless steel 316 (1.4404)
140mm 35.0Kg
66 or 67
-40º to 80º C (-40°F to +176°F) (standard neoprene gasket)
-70º to 130º C (-94°F to +266°F) (silicone gasket)
ATEX EEx e (Zone 1 & Zone 2) BS EN 60079-7
ATEX EEx nA (Zone 2) BS EN 60079-15
ATEX EEx nR (Zone 2) BS EN 60079-15
CSA - Ex e (Class 1 Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
GOST-R Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) (class 1 division 2)
68.000W
MSX 7 / SSX 7 Specifications
Width
Length
Depth
Material
Weight
IP Rating
Temperature
Certification
Power Rating
5
775
775
660
660
528
510
410
272
188
775
660
685
410
145
100
145
100
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691
283-691
285-691
280-998
281-998
264-120
264-220
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
685
635
520
415
345
260
150
822
685
520
415
345
820
820
685
415
345
280
Terminal Populations Maximum Number of Rows
Weidmuller
SAK 2.5
SAK 4
SAK 6
SAK 10
SAK 16
SAK 35
SAK 70
WDU 2.5
WDU 4
WDU 6
WDU 10
WDU 16
Phoenix
UK 2.5 N
UK 3 N
UK 5 N
UK 10 N
UK 16 N
UK 35 N
* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.
200
110
72
54 28
24
200
865
135
Side B-D
140
54
42
22 14
12
Side B-D
140
865
75
200
72
48
36 20
16
200
585
135
Side A-C
140
36
28
14 10
8
Side A-C
140
585
75
Cable Gland Entry Matrix (using standard gland clearances)
Size
M16
M20
M25 M32
M40
Drilling Envelope Size (with glandplate fitted)
Width
Height
Example
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range S
X
38
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
MSX 8 / SSX 8 Drawing
Stain
less Steel an
d M
ild S
teel En
closu
res
1
SX Range 2
BPG Range 3
BPGA Range 4
ZAG Range 5
High Voltage 6 Fire Rated
7
ZP Range 8
Others 9
Technical SX
39
300mm 72.0Kg
200mm 52.0Kg
800mm
1250mm
140mm or 200mm or 300mm
Mild steel
Stainless steel 316 (1.4404)
140mm 40.0Kg
66 or 67
-40º to 80º C (-40°F to +176°F) (standard neoprene gasket)
-70º to 130º C (-94°F to +266°F) (silicone gasket)
ATEX EEx e (Zone 1 & Zone 2) BS EN 60079-7
ATEX EEx nA (Zone 2) BS EN 60079-15
ATEX EEx nR (Zone 2) BS EN 60079-15
CSA - Ex e (Class 1 Zone 1 & Zone2)
FM - AEx e (Class 1 Zone 1 & Zone2)
GOST-R Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) (class 1 division 2)
119.462W
MSX 8 / SSX 8 Specifications
Width
Length
Depth
Material
Weight
IP Rating
Temperature
Certification
Power Rating
5
775
775
660
660
528
510
410
272
188
775
660
685
410
145
100
145
100
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691
283-691
285-691
280-998
281-998
264-120
264-220
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
1295
635
520
415
345
260
150
1554
1295
520
415
345
820
820
685
415
345
280
Terminal Populations Maximum Number of Rows
Weidmuller
SAK 2.5
SAK 4
SAK 6
SAK 10
SAK 16
SAK 35
SAK 70
WDU 2.5
WDU 4
WDU 6
WDU 10
WDU 16
Phoenix
UK 2.5 N
UK 3 N
UK 5 N
UK 10 N
UK 16 N
UK 35 N
* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.
200
150
100
72 40
32
200
1165
135
Side B-D
140
72
58
30 20
17
Side B-D
140
1165
75
200
90
60
45 24
20
200
735
135
Side A-C
140
45
36
18 12
10
Side A-C
140
735
75
Cable Gland Entry Matrix (using standard gland clearances)
Size
M16
M20
M25 M32
M40
Drilling Envelope Size (with glandplate fitted)
Width
Height
Example
Stainless Steel and Mild Steel Enclosures
1
SX
Ra
nge
SX
40
Recommended