View
0
Download
0
Category
Preview:
Citation preview
Pump ConstructionSeries Overview Series GA
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
Model
GearSet
WettedMaterials
DriveMountBase Code Options
3 4 5 6 7 81 2 • •
Order Code
G A •O/C: PumpS/K: Service Kit
Gear PumpProduct Type
GCode Notes
Base Code1
Select a code character for each numbered position to configure the product.Specifications
Modifier3- Standard Design
Gear Set (Width/NºGears/Pitch)4 Displacement Max Differential Pressure Driven Magnet (Standard)
X21 0.063/2/120 (Use C, P8, J8 Gear 0.017 ml/rev (.0045 gal/1000*rev) 1.4 Bar (20 psi) FerriteV21 0.063/2/48 (Use C, P8, J8 Gear M 0.042 ml/rev (0.01 gal/1000*rev) 2.8 Bar (40 psi) FerriteT23 0.125/2/40 (Hex Drive - Use P or J 0.092 ml/rev (0.02 gal/1000*rev) 5.2 Bar (75 psi) Ferrite
Gear Material5 Max Differential Pressure Temp Range
C Carbon Graphite 2.8 Bar (40 psi) -46/177°C (-50/350°F)P PPS (carbon fiber/ptfe) 5.2 Bar (75 psi) -46/177°C (-50/350°F)J PEEK (carbon fiber/ptfe) 5.2 Bar (75 psi) -46/177°C (-50/350°F)J8 PEEK-Pin Drive 2.8 Bar (40 psi) -46/177°C (-50/350°F)P8 PPS-Pin Drive 2.8 Bar (40 psi) -46/177°C (-50/350°F)
Static Seals6 Temp Range
F PTFE -46/232°C (-50/450°F)D EP -46/149°C (-50/300°F)V Viton® -29/204°C (-20/400°F)K Kalrez® -29/260°C (-20/500°F)
Base Materials7S SS316D Alloy 20T TitaniumC Hast C-276®
Drive Mount8 Max System Pressure (MAWP) Weight (Pumphead)
A MP Housing 21 Bar (300 psi) 0.34 kg (0.75 lbs)B MP Plate 21 Bar (300 psi) 0.34 kg (0.75 lbs)C MP Step Cup (2 oz-in, SS316) 21 Bar (300 psi) 0.31 kg (0.68 lbs)M I-Drive™ IMS 21 Bar(300 psi) SS316 0.37 kg (0.82 lbs)E NEMA 56C 21 Bar (300 psi) 1.1 kg (2.4 lbs)2 IEC 56-B14 21 Bar (300 psi) 1.1 kg (2.4 lbs)4 IEC 63-B14 21 Bar (300 psi) 1.1 kg (2.4 lbs)
Product Series2 Max System Pressure (MAWP) Ports
A Series GA 21 Bar (300 psi) 1/8-27 (F) NPT Side Ports
Options Add Option codes after the Base Code to modify features or enhance the product.
Notes
Driving Magnet (PC13)N3 NdFeB Driving (Ring) 1
1 Available only with industrial IEC or NEMA drive mounts
Form F312 Rev BPage 1 of 1
PRICES ARE FOB/EX-WORKS FACTORY - Prices shown are the Manufacturer's Suggested List Price and are subject to change without notice.
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info.micropump@idexcorp.com www.micropump.com© 1999-2005 Micropump, Inc., Trademarks belong to their respective owners. 01-Sep-05
GA000S.2MPVEffective:
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMountBase Code Options
3 4 5 6 7 81 2 • •
Order Code
G A•
- X21 C
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
Water @ 1 CP
[psi]0 10 20 30 40 50
[bar]0 1 2 3 4
[ml/m
n]
0
10
20
30
40
50
60
70
80
[gph
]
0.0
0.2
0.4
0.6
0.8
1.0
1.2
[oz-
in]
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
[mN
m]
0
2
4
6
8
10
Torque 500-3450 RPM
500 RPM 860 RPM
1150 RPM
1450 RPM
1750 RPM
2400 RPM
2850 RPM
3450 RPM
4000 RPM
Flow
Torq
ueDifferential Pressure
GA-X21
Performance
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 07-Oct-05
Page 1GA100 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective owners.
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMountBase Code Options
3 4 5 6 7 81 2 • •
Order Code
G A•
- X21 C
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
Oil @ 100 CP
[psi]0 10 20 30 40 50
[bar]0 1 2 3 4
[ml/m
n]
0
10
20
30
40
50
60
70
80
[gph
]
0.0
0.2
0.4
0.6
0.8
1.0
1.2
[oz-
in]
0
1
2
3
4
5
6
[mN
m]
0
5
10
15
20
25
30
35
40
45
Torque 500-3450 RPM
500 RPM
860 RPM
1150 RPM
1450 RPM
1750 RPM
2400 RPM
2850 RPM
3450 RPM
4000 RPM
Flow
Torq
ue
Differential Pressure
GA-X21
Performance-High Viscosity
Viscosity [cp] 1 100 1500 Driven Driving Torque TorqueMax Speed [RPM] 8000 3450 1750 Magnet Hub [mNm] [oz.in]
[Bar] [psi] Ferrite Ferrite 78 110.3 5 0.1 1 1.80.7 10 0.2 1 1.81.4 20 0.2 1 1.72.1 30 0.2 1 1.72.8 40 0.2 1 1.6
Torque Correction Factors: For Higher Viscosity Liquids Magnet Decouple TorqueTo calculate torque, multiply correction factor by torque from viscosity curve above.
Watts=Torque [mNm] x Speed [RPM] 9555
HP=Torque [oz-in] x Speed [RPM] 1.008 x 10^6
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 07-Oct-05
Page 2GA100 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective owners.
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMountBase Code Options
3 4 5 6 7 81 2 • •
Order Code
G A•
- X21 C
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
USSI
Specifications
Displacement 0.017 ml/rev .0045 gal/1000*rev
Max Flow (4 Pole Speed) 30 ml/mn 1450 RPM (50Hz) 0.5 gal/hr 1750 RPM (60Hz)
Max Flow (2 Pole Speed) 50 ml/mn 2850 RPM (50Hz) 0.9 gal/hr 3450 RPM (60Hz)
Max Differential Pressure 2.8 Bar 40 psi1
Max System Pressure (MAWP) 21 Bar 300 psi
NIPR (Absolute) 180 mBar 2.5 psia
Wet Lift (Typical) 51 cm.H2O (1450 RPM) 24 in.H2O (1750 RPM)2
Temp Range See Gear Material See Gear Material3
Viscosity Range 0.2 to 1500 cp 0.2 to 1500 cp4
Max Speed 8,000 RPM 8,000 RPM
Rotation (Facing Motor Shaft) CW CW
Weight (Pumphead) 0.34 kg 0.75 lbs
Dimensions (LxWxH) See Drawing See Drawing
Ports 1/8-27 (F) NPT Side Ports 1/8-27 (F) NPT Side Ports
Driven Magnet (Standard) Ferrite Ferrite
Optional Internal Bypass No No
Notes1 See Product Options. Max pressure depends on gear material.2 Priming ability varies with operating conditions.3 See Product Options for specific temp limits.4 See Performance-High Viscosity for viscosity limits.
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 07-Oct-05
Page 3GA100 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective owners.
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMount snoitpOedoC esaB
3 4 5 6 7 81 2 • •
Order Code
G A•
- X21 C 2/4/6
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
Dimensions
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 07-Oct-05
Page 5GA105 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective owners.
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMountBase Code Options
3 4 5 6 7 81 2 • •
Order Code
G A•
- X21 C E
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
Dimensions
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 07-Oct-05
Page 5GA104 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective owners.
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMount snoitpOedoC esaB
3 4 5 6 7 81 2 • •
Order Code
G A•
- X21 C A/B
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
Dimensions
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 07-Oct-05
Page 5GA100 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective owners.
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMountBase Code Options
3 4 5 6 7 81 2 • •
Order Code
G A•
- V21 C
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
Water @ 1 CP
[psi]0 10 20 30 40 50 60 70 80 90 100
[bar]0 1 2 3 4 5 6 7
[ml/m
n]
0
20
40
60
80
100
120
140
160
180
200
[gph
]
0.0
0.5
1.0
1.5
2.0
2.5
3.0
[oz-
in]
0.0
0.5
1.0
1.5
2.0
[mN
m]
0
2
4
6
8
10
12
14
Torque 500-3450 RPM
500 RPM860 RPM
1150 RPM
1450 RPM
1750 RPM
2400 RPM
2850 RPM
3450 RPM
4000 RPM
Flow
Torq
ueDifferential Pressure
GA-V21
Performance
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 06-Oct-05
Page 1GA300 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective ow
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMountBase Code Options
3 4 5 6 7 81 2 • •
Order Code
G A•
- V21 C
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
Oil @ 100 CP
[psi]0 10 20 30 40 50 60 70 80 90 100
[bar]0 1 2 3 4 5 6 7
[ml/m
n]
0
20
40
60
80
100
120
140
160
180
200
[gph
]
0.0
0.5
1.0
1.5
2.0
2.5
3.0
[oz-
in]
0
1
2
3
4
5
6
7
8
[mN
m]
0
10
20
30
40
50
60
Torque 500-3450 RPM
500 RPM
860 RPM
1150 RPM
1450 RPM
1750 RPM
2400 RPM
2850 RPM
3450 RPM
4000 RPM
Flow
Torq
ue
Differential Pressure
GA-V21
Performance-High Viscosity
Viscosity [cp] 1 100 1500 Driven Driving Torque TorqueMax Speed [RPM] 8000 3450 1750 Magnet Hub [mNm] [oz.in]
[Bar] [psi] Ferrite Ferrite 78 110.3 5 0.2 1 2.91.4 20 0.2 1 2.82.8 40 0.2 1 2.74.1 60 0.2 1 2.65.5 80 0.2 1 2.5
Torque Correction Factors: For Higher Viscosity Liquids Magnet Decouple TorqueTo calculate torque, multiply correction factor by torque from viscosity curve above.
Watts=Torque [mNm] x Speed [RPM] 9555
HP=Torque [oz-in] x Speed [RPM] 1.008 x 10^6
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 06-Oct-05
Page 2GA300 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective ow
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMountBase Code Options
3 4 5 6 7 81 2 • •
Order Code
G A•
- V21 C
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
USSI
Specifications
Displacement 0.042 ml/rev 0.01 gal/1000*rev
Max Flow (4 Pole Speed) 70 ml/mn 1450 RPM (50Hz) 1.2 gal/hr 1750 RPM (60Hz)
Max Flow (2 Pole Speed) 120 ml/mn 2850 RPM (50Hz) 2.3 gal/hr 3450 RPM (60Hz)
Max Differential Pressure 2.8 Bar 40 psi1
Max System Pressure (MAWP) 21 Bar 300 psi
NIPR (Absolute) 180 mBar 2.5 psia
Wet Lift (Typical) 51 cm.H2O (1450 RPM) 24 in.H2O (1750 RPM)2
Temp Range See Gear Material See Gear Material3
Viscosity Range 0.2 to 1500 cp 0.2 to 1500 cp4
Max Speed 8,000 RPM 8,000 RPM
Rotation (Facing Motor Shaft) CW CW
Weight (Pumphead) 0.34 kg 0.75 lbs
Dimensions (LxWxH) See Drawing See Drawing
Ports 1/8-27 (F) NPT Side Ports 1/8-27 (F) NPT Side Ports
Driven Magnet (Standard) Ferrite Ferrite
Optional Internal Bypass No No
Notes1 See Product Options. Max pressure depends on gear material.2 Priming ability varies with operating conditions.3 See Product Options for specific temp limits.4 See Performance-High Viscosity for viscosity limits.
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 06-Oct-05
Page 3GA300 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective ow
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMount snoitpOedoC esaB
3 4 5 6 7 81 2 • •
Order Code
G A•
- V21 C 2/4/6
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
Dimensions
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 06-Oct-05
Dimensions 1GA305 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective ow
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMount snoitpOedoC esaB
3 4 5 6 7 81 2 • •
Order Code
G A•
- V21 C A/B
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
Dimensions
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 06-Oct-05
Dimensions 1GA301 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective ow
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMountBase Code Options
3 4 5 6 7 81 2 • •
Order Code
G A•
- V21 C E
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
Dimensions
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 06-Oct-05
Dimensions 1GA304 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective ow
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMountBase Code Options
3 4 5 6 7 81 2 • •
Order Code
G A•
- T23
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
Water @ 1 CP
[psi]0 10 20 30 40 50 60 70 80 90 100
[bar]0 1 2 3 4 5 6 7
[ml/m
n]
0
50
100
150
200
250
300
350
400
450
[gph
]
0
1
2
3
4
5
6
7
[oz-
in]
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
[mN
m]
0
5
10
15
20
25
Torque 500-3450 RPM
500 RPM860 RPM
1150 RPM
1450 RPM
1750 RPM
2400 RPM
2850 RPM
3450 RPM
4000 RPM
Flow
Torq
ueDifferential Pressure
GA-T23
Performance
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 06-Oct-05
Page 1GA700 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective ow
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMountBase Code Options
3 4 5 6 7 81 2 • •
Order Code
G A•
- T23
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
Oil @ 100 CP
[psi]0 10 20 30 40 50 60 70 80 90 100
[bar]0 1 2 3 4 5 6 7
[ml/m
n]
0
50
100
150
200
250
300
350
400
450
[gph
]
0
1
2
3
4
5
6
7
[oz-
in]
0
1
2
3
4
5
6
7
[mN
m]
0
10
20
30
40
50
Torque 500-3450 RPM
500 RPM
860 RPM
1150 RPM
1450 RPM
1750 RPM
2400 RPM
2850 RPM
3450 RPM
4000 RPM
Flow
Torq
ue
Differential Pressure
GA-T23
Performance-High Viscosity
Viscosity [cp] 1 100 1500 Driven Driving Torque TorqueMax Speed [RPM] 8000 3450 1750 Magnet Hub [mNm] [oz.in]
[Bar] [psi] Ferrite Ferrite 78 110.3 5 0.2 1 3.01.4 20 0.2 1 2.82.8 40 0.3 1 2.74.1 60 0.4 1 2.55.5 80 0.4 1 2.4
Torque Correction Factors: For Higher Viscosity Liquids Magnet Decouple TorqueTo calculate torque, multiply correction factor by torque from viscosity curve above.
Watts=Torque [mNm] x Speed [RPM] 9555
HP=Torque [oz-in] x Speed [RPM] 1.008 x 10^6
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 06-Oct-05
Page 2GA700 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective ow
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMountBase Code Options
3 4 5 6 7 81 2 • •
Order Code
G A•
- T23
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
USSI
Specifications
Displacement 0.092 ml/rev 0.02 gal/1000*rev
Max Flow (4 Pole Speed) 140 ml/mn 1450 RPM (50Hz) 2.6 gal/hr 1750 RPM (60Hz)
Max Flow (2 Pole Speed) 270 ml/mn 2850 RPM (50Hz) 5.1 gal/hr 3450 RPM (60Hz)
Max Differential Pressure 5.2 Bar 75 psi1
Max System Pressure (MAWP) 21 Bar 300 psi
NIPR (Absolute) 180 mBar 2.5 psia
Wet Lift (Typical) 51 cm.H2O (1450 RPM) 24 in.H2O (1750 RPM)2
Temp Range See Gear Material See Gear Material3
Viscosity Range 0.2 to 1500 cp 0.2 to 1500 cp4
Max Speed 8,000 RPM 8,000 RPM
Rotation (Facing Motor Shaft) CW CW
Weight (Pumphead) 0.34 kg 0.75 lbs
Dimensions (LxWxH) See Drawing See Drawing
Ports 1/8-27 (F) NPT Side Ports 1/8-27 (F) NPT Side Ports
Driven Magnet (Standard) Ferrite Ferrite
Optional Internal Bypass No No
Notes1 See Product Options. Max pressure depends on gear material.2 Priming ability varies with operating conditions.3 See Product Options for specific temp limits.4 See Performance-High Viscosity for viscosity limits.
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 06-Oct-05
Page 3GA700 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective ow
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMount snoitpOedoC esaB
3 4 5 6 7 81 2 • •
Order Code
G A•
- T23 2/4/6
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
Dimensions
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 06-Oct-05
Dimensions 1GA705 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective ow
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMount snoitpOedoC esaB
3 4 5 6 7 81 2 • •
Order Code
G A•
- T23 A/B
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
Dimensions
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 06-Oct-05
Dimensions 1GA701 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective ow
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Pump ConstructionSeries GATechnical Data
Model
GearSet
WettedMaterials
DriveMountBase Code Options
3 4 5 6 7 81 2 • •
Order Code
G A•
- T23 E
O/C: PumpS/K: Service Kit
Magnetic Drive Gear PumpSuction Shoe StyleTwo Spur Gears/DP120, 48 or 40Stationary ShaftsPTFE Bevel Seal (Qty 1)
Dimensions
USA: Micropump, Inc., A Unit of IDEX Corporation • Phone 360.253.2008 • Fax 360.253.2401UK: Micropump, Ltd., A Subsidiary of Micropump, Inc. • Phone +44 (1480) 356900 • Fax +44 (1480) 356920
info@micropump.com www.micropump.comForm F323 Rev A Printed 06-Oct-05
Dimensions 1GA704 Rev A
© 2000-2005 Micropump, Inc., Trademarks belong to their respective ow
ACTUAL PERFORMANCE MAY VARY - Specifications are subject to change without notice. When multiple specs are noted, the most conservative value applies.
Recommended