View
7
Download
0
Category
Preview:
Citation preview
Trays
and b
oxe
s
• Injection molded ABS trays and inserts.
• Stackable.
• Pre-perforated on edge for mounting safety stops.
• Beaded edge on trays for label holders.
• Inserts and partitions for compartmentilizing.
• Machine washable for short periods of time
at maximum of 90˚C (194°F).
• High-Density storage for large and small items.
• Modular Inserts for storage and transportation of
small items.
“
”
111
300 + 300
400
ABS
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
PC
ABS
ABS
ABS
20-34201Tray / Lid 300 x 400 x 15mm
11¾ x 15¾ x 5/8”
20-34204Tray / Lid
300 x 400 x 70mm
11¾ x 15¾ x 2¾”
20-34304Tray / Lid
300 x 400 x 70mm
11¾ x 15¾ x 2¾”
20-34206Tray for use with partitions
300 x 400 x 50mm
11¾ x 15¾ x 2”
Partitions 300mm (11¾”) max. 15 pcs. (20-64269)
Partitions 400mm (11¾”) max. 11 pcs. (20-64270)
20-34205Tray 300 x 400 x 50mm
11¾ x 15¾ x 2”
Tray lids and trays
2
1
5
4
3
2
1
5
4
3
11¾ + 11¾
15¾
11¾ + 11¾
11¾ + 11¾
15¾
11¾ + 11¾
11¾ + 11¾
15¾15¾
15¾
112
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
PMMA
PMMA
PA
ABS
ABS
Trays, boxes and partitions
20-34207Tray for use with partitions
300 x 400 x 50mm
11¾” x 15¾” x 2”
Partitions 300mm (11¾”) max. 15 pcs. (20-64269)
Partitions 400mm (15¾”) max. 11 pcs. (20-64270)
20-64269Partition 300 x 50mm 11¾ x 2”
20-64270Partition 400 x 50mm 15¾ x 2”
20-64266T-piece for partition
20-34220Box 300 x 400 x 200mm
11¾ x 15¾ x 20”
20-34210Tray 300 x 400 x 100mm
11¾ x 15¾ x 10”
2
1
5
4
3
2
1
5
4
3
2
11¾ + 11¾
15¾
11 ¾+ 11 ¾
15¾15¾
11¾ + 11¾
11¾ + 11¾
15¾15¾
11¾ + 11¾
113
600
400
600
400
600
400
600
400
600
400
ABS
ABS
ABS
ABS
ABS
Tray lids, trays and boxes
20-64201Lid tray 600 x 400 x 15mm
235/8 x 15¾ x 5/8”
20-64205Tray 600 x 400 x 50mm
235/8 x 15¾ x 2”
20-64210Tray 600 x 400 x 100mm
235/8 x 15¾ x 4”
20-64228Box 600 x 400 x 280mm
235/8 x 15¾ x 11”
20-64220Box 600 x 400 x 200mm
235/8 x 15¾ x 8”
3
4
5
1
2
3
4
5
1
2
235/8
15¾
235/8
15¾
235/8
15¾15¾
235/8
15¾
23 5/8
114
600
400
600
400
ABS
600
400
PMMA
300 + 300
400
PMMA/ABS
600
400
ABS
Trays and partitions
20-64206Trays for use with partitions
600 x 400 x 50mm
235/8 x 15¾ x 2”
Partitions 400mm (15¾”) max. 25 pcs. (20-64270)
Partitions 600mm (235/8”) max. 15 pcs. (20-64271)
20-64207Tray for use with partitions
600 x 400 x 50mm
23 5/8 x 15¾ x 2”
Partitions 400mm (15¾”) max. 25 pcs. (20-64270)
Partitions 600mm (235/8”) max. 15 pcs. (20-64271)
20-64272Partitions 200 x 50mm (77/8 x 2”)
20-64270Partitions 400 x 50mm (15¾ x 2”)
20-64271Partitions 600 x 50mm (235/8 x 2”)
20-64266T-pieces for partitions
20-34206
20-34207
INSERTS
Inserts can be used as an
alternative to partitions or
independently without trays.
Trays for partitions300 x 400mm (11¾ x 15¾”)
See page 111 and 112
3
4
5
1
2
4
3
5
1
3
3
3
2
235/8
15¾
235/8
15¾15¾
15¾
235/8
11 ¾+11 ¾
235/8
15¾
115
600
400
600
400
600
400
ABS
PMMA
PMMA
300 + 300
400
300 + 300
400
PA
ABS
Trays and partitions
20-64211Tray for use with partitions
600 x 400 x 100mm
(235/8 x 15¾ x 4”)
Partitions 400mm (15¾”) max. 17 pcs.
Partitions 600mm (235/8”) max. 11 pcs.
23-64353Partition 400 x 100mm (15¾ x 4”)
23-64354Partition 600 x 100mm (235/8 x 4”)
20-64212Tray for use with partitions
600 x 400 x 100mm
(235/8 x 15¾ x 4”)
Partitions 400mm (15¾”) max. 17 pcs.
Partitions 600mm (235/8”) max. 11 pcs.
20-64266The T-piece secures the
smaller ”snapped off” sections
of the partitions.
All partitions have a “snap”
feature between the ribs, for defined
division of the modules.
3
4
5
1
2
3
5
4
2
1
3
235/8
15¾
235/8
15¾
235/8
15¾15¾
11 ¾ +11 ¾
11 ¾ +11 ¾
15¾
Bask
ets
• Injection molded ABS baskets.
• Stackable.
• Pre-perforated for safety stops.
• Beaded edges on baskets for label holders.
• Partitions for compartmentalization.
• Washable at max. 90˚C(194°F) for short periods
of time.
• Strong and durable construction.
“
”
117
300 + 300
400
300 + 300
400
600
400
600
400
300 + 300
400
ABS
ABS
ABS
ABS
PA
Baskets and partitions
23-34251Basket 300 x 400 x 100mm
(11¾ x 15¾ x 4”)
Partitions 300mm (11¾”) max. 11 pcs. (23-64257)
Partitions 400mm (15¾”) max. 7 pcs. (23-64253)
23-64251Basket 600 x 400 x 100mm
(235/8 x 15¾ x 4“)
Partitions 400mm (15¾”) max. 17 pcs. (23-64253)
Partitions 600mm (235/8 “) max. 11 pcs. (23-64254)
23-34252Basket 300 x 400 x 200mm
(11¾ x 15¾ x 77/8”)
Partitions 400mm (15¾”) max. 7 pcs. (23-64255)
The labeling system has been designed to ensure
accurate product identification.
The product labels can be
placed on all of the modules,
anywhere in the supply chain
process.
23-64252Basket 600 x 400 x 200mm
(235/8 x 15¾ x 77/8”)
Partitions 400mm (15¾”) max. 17 pcs. (23-64255)
Partitions 600mm (235/8”) max. 11 pcs. (23-64256)
3
4
5
1
2
3
5
4
2
1
11 ¾ +11 ¾
15¾15¾
11 ¾ +11 ¾
235/8
15¾15¾
15¾
11 ¾+11 ¾
235/8
118
600
400
600
400
300 + 300
400
300 + 300
400
300 + 300
400
ABS
ABS
PA
ABS
ABS
Partitions for baskets
23-64253Partitions 400 x 100mm (15¾ x 4”)
23-64254Partitions 600 x 100mm ( 235/8 x 4”)
23-64255Partitions 400 x 200mm (15¾ x 8”)
23-64256Partitions 600 x 200mm (235/8 x 8”)
20-64266T-piece for partitions
23-64259Partition lock
23-34260Basket Liner
300 x 400mm (11¾ x 15¾”)
23-64260Basket Liner for basket 600x400x100mm
600 x 400mm (235/8 x 15¾”)
23-64261Basket Liner for basket 600x400x200mm
600 x 400mm (235/8 x 15¾”)
2
1
2
1
5
4
3
2
1
5
4
3
5
235/8
15¾15¾
15¾15¾
235/8
11 ¾+ 11 ¾
11¾ + 11¾
11 ¾+ 11 ¾
15¾
5
Modula
r inse
rts
• Injection molded ABS trays and inserts.
• Stackable.
• Inserts for compartmentalization.
• Washable at max. 90°C (194°F)for short periods
of time.
• High density storage for large and small items.
• Inserts are ideal for storage and transport of
small items.
“
”
120
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
PA
RIL
ABS
ABS
ABS
EP
ABS
ABS
35/77
15/28
12
6
14
6
12
6
6
3
Modular inserts and partitions
Individual
modular inserts
arranged in a tray
21-62205Partition
70mm (2¾”) for 21-62206
21-62204Inserts
100x50x45mm
(4x2x1¾”) 21-62202Inserts
50x50x45mm
(2x2x1¾”)
21-62220Inserts
240x55x50mm
(9½x21/8 x2”)
28-62751550mm (215/8”)
gray
28-62753650mm (235/8”)
gray
21-62206Inserts
170x75x50mm
(6¾x3x2”)
21-62212Inserts
240x110x50mm
(9½x4¾x2”)
21-62210Inserts
120x110x50mm
(4¾x4¾x2”)
28-62752550mm (215/8”)
blue
28-62754650mm (235/8”)
blue
Suspension rails for insert
21-62206
Suspension rails for inserts
21-62206
3
4
5
1
2
4
5
3
3
2
1
2
4
5
4
3
3
11 ¾+ 11 ¾
15¾
15¾
11 ¾+ 11 ¾
11 ¾+ 11 ¾
11¾ + 11¾
11¾ + 11¾
11 ¾+ 11 ¾
11 ¾+ 11 ¾
11 ¾+ 11 ¾
15¾
15¾
121
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
ABS
ABS
ABS
PA
ABS
ABS
ABS
12
6
9
4
9
4
6
3
4
2
4
2
ABS
PC
Modular inserts and partitions
21-62222Inserts
240x55x100mm
(9½x21/8x37/8”)
21-62230Inserts
340x55x100mm
(133/8 x21/8 x37/8”)
21-62207Partition
W110mm
H 50mm
(H 2” W 4¾”)
21-62218Inserts
240x110x100mm
(9½x43/8 x37/8”)
21-62226Inserts
340x110x100mm
(133/8 x4¾x37/8”)
21-62224Inserts
340x110x50mm
(133/8x4¾x2”)
21-62216Lid for insert,
gray
240x120mm
(9½x4¾”)
21-62228Inserts
340x55x50mm
(133/8 x21/8x2”)
21-62215Transparent insert lid
240x120mm
(9½x4¾”) 21-62215FTransparent insert lid
240x120mm
(9½x4¾”)
Cut out 150x40mm
(57/8 x 1 5/8”)
Lids for inserts
21-62212
21-62218
3
5
4
3
2
1
4
5
1
1
2
1
2
1
4
3
11¾ + 11¾
11¾ + 11¾
15¾
11¾ + 11¾
11¾ + 11¾
15¾
11¾ + 11¾
15¾
15¾15¾
15¾15¾
11¾ + 11¾
11 ¾+ 11 ¾
122
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
ABS
ABS
ABS
ABS
PC
PC
PC
PC
ABS
3
0
6
0
12
6
4
2
6
3
4
2
Modular inserts (autoclavable)
21-62240Inserts
550x55x70mm
(215/8 x21/8 x2 ¾”)
21-62209Inserts
120x110x50mm
(4¾x4¾x2 “)
21-62225Inserts
340x110x50mm
(133/8x4¾x2 “)
18-67372Catheter holder with hook for
accessary rail
550x110x50mm (215/8 x4¾x2”)
10x25mm (3/8”x1”) 41-30040for Scancell
21-62244Inserts
850x110x50mm
(33½x4¾x2”)
18-67373Catheter holder with hook for
accessory rail
850x110x50mm
(33½x4¾x2”)10x25mm(3/8”x1”)
41-30042for Scancell
21-62242Inserts
550x110x50mm
(215/8 x4¾x2”)
Autoclava
ble
Autoclava
ble
Autoclava
ble
Autoclava
ble
3
4
5
1
2
5
4
3
3
1
21-62227Inserts
340x110x100mm
133/8x4¾x4 “
5
21-62214Inserts
240x110x50mm
(9½x4¾x2“)
4
3
3
2
1
11¾ + 11¾
11 ¾+ 11 ¾
11¾ + 11¾
11¾ + 11¾ 11¾ + 11¾
11¾ + 11¾
15¾
15¾
15¾15¾
15¾15¾
Medic
ine d
istributio
n
• Module for storage and transportation of medicine.
• Medicine dispensers.
• Transport boxes.
• Different label systems.
• UNI-boxes.
• Modular inserts with compartments.
“
”
124
300 + 300
400
300 + 300
400
600
400
600
400
300 + 300
400
ABS
ABS
RIL/EP
ABS
ABS
Inserts for medicine
28-62760UNI-box with handle
340 x 80 x 70mm (133/8 x 31/8 x 2¾”) 28-62762Partitions, crosswise 80mm (31/8”)
28-62758UNI-box with handle
340 x120 x 70mm (133/8 x 4¾ x 2¾”) 28-62759Partitions, crosswise120mm (2¾”)
28-62760LUni-box with lid
340 x 80 x 70mm (133/8 x 31/8 x 2¾”) 28-62758LUni-box with lid
340 x 120 x 70mm (133/8 x 4¾ x 2¾”)
28-62763Rail for suspension of UNI-boxes
600mm (235/8”) long, gray
28-62763B600mm (235/8”) long, blue
28-62724Tray 600 x 400 x 50mm
(235/8 x 15¾ x 2”)
6 pcs. UNI-box 340 x 80 x 70mm
(133/8 x 31/8 x 2¾)
Credit-card size label slots
Stands are available in different
versions. Can be inserted either in ´A´
400mm (15¾”) or ´B´ 600mm (235/8”)
position.
The stand shown at the right
(prod. no. 41-80033) is in a “B” (235/8”)
(600mm) insertion. 18 cassettes are
inserted in the stand
3
4
5
1
2
3
5
4
1
3
2
1
1
1
2
15¾
11¾ + 11¾
11¾ + 11¾
15¾15¾
235/8
235/8
15¾15¾
11¾ + 11¾
125
300 + 300
400
600
400
600
400
600
400
600
400
ABS
ABS
ABS/PMMA
ABS/PMMA
ABS/PMMA
Inserts for medicine
28-62704Tray 300 x 400 x 50mm (11¾ x 15¾ x 2”)
with slots for cards + transparent insert
with 8 compartments.
Each compartment has 4 recessed holes
for medicine cups
28-62700Tray 300 x 400 x 50mm (11¾ x 15¾ x 2”)
with slots for cards + transparent insert
with 15 compartments
28-62730
28-62722Tray 600 x 400 x 50mm
(235/8 x 15¾ x 2”)
with sections for modular inserts:
170 x 75 x 50mm (6¾ x 3 x 2”)
(21-62206)
(2 X 7 pcs. = 14 inserts per tray)
28-62720Tray 600 x 400 x 50mm (235/8 x 15¾ x 2”)
with sections for 4 modular inserts:
340 x 120 x 50mm (133/8 x 4¾ x 2” )
(21-62224)
340 x 120 x 100mm (133/8 x 4¾ x 4”) (21-62226)
Slot for Insertion of credit-card size labels
28-62734Tray 600 x 400 x 50mm (235/8 x 15¾ x 2”)
with inserts for cards + transparent insert
with 20 compartments.
Each compartment has 4
recessed holes for medicine cups
Tray 600 x 400 x 50mm (235/8 x 15¾ x 2”)
with slots for cards + transparent insert
with 35 compartments
2
1
1
5
4
3
2
1
5
4
3
11¾ + 11¾
15¾15¾
15¾15¾
15¾
235/8
23 5/8
235/8
235/8
126
300 + 300
400
600
400
300 + 300
400
300 + 300
400
300 + 300
400
ABS
ABS
PC
ABS/PC/PPO
PS
6
3
Inserts for medicine etc.
28-62739Tray 300 x 400 x 50mm (11¾ x 15¾ x 2”)
with inserts for 12 medicine dispensers
28-62737Tray 600 x 400 x 50mm (235/8 x 15¾ x 2”)
with insert for 2 x 12 = 24 medicine
dispensers
28-62741EMedicine dispensers,
4 compartments with
transparent sliding lid
21-64102Test Tube Holder for 50 pcs.
13mm (1/2”) holes
21-64104Test Tube Holder for 32 pcs.
18mm (3/4” ) holes
21-64106Test Tube Holder for 18 pcs.
25mm (1”) holes
21-62215F Lid, transparent -PC
240 x 120mm (9½ x 14¾”)
Opening 150 x 40mm (57/8 x 15/8”)
21-62213 Inserts, yellow -ABS
240 x 120 x 50mm (9½ x 14¾ x 2”)
20-34303 Lid tray, yellow -PPO
300 x 400 x 15mm (11¾ x 15¾ x 5/8”)
2 Openings 155 x 45mm (61/8 x 1¾”) 20-34311 Tray, yellow -PPO
300 x 400 x 100mm (11¾ x 15¾ x 37/8”)
3
4
5
1
2
3
5
4
5
5
5
4
4
2
1
11¾ + 11¾
15¾15¾
15¾
11¾ + 11¾
235/8
11¾ + 11¾
15¾
11¾ + 11¾
15¾
127
300 + 300
400
300 + 300
400
300 + 300
400
600
400
300 + 300
400
ABS
SS
ABS
ABS
ABS/
PC
AB
C
Modular tray and box accessories
28-62710Injection tray 400 x 300mm (15¾ x 11¾”)
divided up with space for syringes,
swabs, hypodermic needles, vials and
prepared syringes
19-64806Stainless steel plate with a hole
for locking the box and lid together
19-64808Lock with space for label
Can also be secured with clips19-64680 - 19-64675 - 19-64676
Labels can be put on the plate or text can
be printed directly on the steel plate
Boxes with lids for medicine transportation A) Box (20-34210)
300 x 400 x 100mm (11¾ x 15¾ x 4”)
and lid (20-34201)
300 x 400 x 15mm (11¾ x 15¾ x 5/8”)
B) Box (20-34220)
300 x 400 x 200mm (11¾ x 15¾ x 77/8”)
and lid (20-34204)
300 x 400 x 70mm (11¾ x 15¾ x 2¾”)
Assorted labeling options available
C) Box (20-64220)
600 x 400 x 200mm (235/8 x 15¾ x 77/8”)
and lid (20-64201)
600 x 400 x 15mm (235/8 x 15¾ x 5/8”)
Trays baskets and lids can be
silk-screened with custom printing.
3
4
5
1
2
3
4
5
3
4
2
2
1
315¾
15¾15¾
15¾15¾
11¾ + 11¾
11¾ + 11¾
11¾ + 11¾
11¾ + 11¾
235/8
Labelin
g a
nd a
ccess
orie
s
• Injection molded label holders in Polyamid.
• Stainless steel label holders.
• Labels for bar codes.
• Handles for trays and baskets.
• Alu-clip-holders.
• Attachments for A4 hanging files.
• Frame for catheter holders.
• Module boxes for storing catheters.
“
”
129
PA
PA
Accessories for modules
19-64680Security clips for boxes and lids
19-64675Sealing arrow, red
19-64676Sealing arrow, blue
19-61870Safety Stops for baskets
2 parts, blue
Are used to prevent modules from fall-
ing when they are fully extended out of
cabinets, racks or carts. To be used with
Scan Modul side-panels and runners.
3
4
5
1
2
5
4
5
5
2
600
400
PA
19-61881Handle 400mm (15¾”) blue (incl. locks)
19-61891Handle 600mm (235/8”) blue (incl. locks)
1
1
19-61880Handle 400mm (15¾”) gray (incl. locks)
19-61890Handle 600mm (235/8”) gray (incl. locks)
Handles can be mounted on all plastic containers and baskets from
Scan Modul System with pre-perforated holes on the edge
1
1
EP
20-64290Wall rails 600mm (235/8 ”) for suspending
100mm (4”) deep modules at an angle,
blue, Ral 5013
SMS label systemLabels are available with all types
of clips, and for printing bar codes
by laserprinters and thermoprinters.
3
4
3
4
20-64292Wall rails 600mm (235/8”)for suspending
100mm (4”) deep modules
horizontally, blue, Ral 5013
235/8
15¾
130
PA
PA
PA
PA/PC
PA
Accessories for identification
19-61800Label holders without cover,
Blue,
19-61700White
For labels maximum size of
57 x 38mm (2¼ x 1½”)
19-61818Large label holder without cover
Blue
19-61705White
For labels maximum size of,
38 x 57mm (1½ x 2¼”)
19-61805Large label holder without cover
Can be placed in straight or angled
position. Blue
For labels maximum size of,
38 x 57mm (1½ x 2¼”)
19-61804Transparent cover for label holders
19-61802Transparent cover for large label holders
For labels maximum size of,
57 x 38mm (1½ x 2¼”)
19-61810Credit card size label holders blue
Maximum size 85 x 54mm (33/8 x 2 1/8 )
19-61811 - Plastic card, red
19-61812 - Plastic card, blue
19-61813 - Plastic card, green
19-61814 - Plastic card, white
19-61817 - Plastic card, yellow
19-61816 - Cover, clear
3
4
5
1
2
3
4
5
1
2
2
4
5
1
131
300 + 300
400
SS
PA
PA
Accessories for identification
19-64830Holder for A-5 sheets.
Made in stainless steel.
Can withstand washing
and the autoclave
19-64543Stainless steel plate
for labels or
“Dymo”/”P-Touch” tape
19-64879Label holder vertical large, white
For label max. 100 x 70mm
(37/8 x 2¾”)
19-64805 DPLabel holder, horizontal, white
For label max. 25 x 75mm (1 x 3”)
19-64805 DLabel holder, horizontal, white
For label max. 20 x 70mm (¾ x 2¾”)
3
1
2
3
3
2
1
1
ALU
ALU
19-64857Alu-clip-holder for labels 350mm (13¾”)
for type A cabinets
19-64858Alu-clip-holder for labels
550mm (215/8”)
for type B cabinets
19-64855Alu-profile is available in any length
19-64851End stop for clip-holder
19-64852Center support recommended for
clips-holder when length is more than
1000mm (39½”)
4
5
4
5
5
5
4
11¾ + 11¾
15¾
132
300 + 300
400
600
400
600
400
600
400
ABS
ABS/ALU
ABS/ALU
ABS/PC
Accessories modular trays and -boxes
41-80006Tray 300 x 400 x 200mm (11¾ x 15¾ x 77/8”)
with attachment for A 4
suspension files.
Can be inserted in type A + D
41-80004Tray 600 x 400 x 200mm (235/8 x15¾ x 77/8”)
with attachment for A 4
suspension files.
Can be inserted in type A
18-67331Frame with 4 rails
for suspending catheter holders
400 x 600mm (15¾ x 235/8”)
18-67330Frame with 6 rails for suspending
catheter holders
600 x 400mm (235/8 x 15¾”)
Catheter box holder 18-67652 - Height 475mm (18¾”)
18-67653 - Height 490mm (19½”)
18-67654 - Height 675mm (265/8”)
18-67655 - Height 760mm (30”)
18-67656 - Height 900mm (35½”)
*Partitions shown in picture are optional accessories.
3
5
4
2
41-80002 A4 Suspension files41-80002/01 White
41-80002/02 Yellow
41-80002/03 Green
41-80002/04 Blue
41-80002/05 Red
1
3
4
5
2
1
400
153/
4
153/
4
11¾ + 11¾
153/
415
3/4
153/
4
235/8
235/8
235/8
Handle with STOP 400mm (15¾”)
Partitions for SMS modules20-64206 and 20-64211
20-64270Partition 400x50mm (15¾x2”)
20-64271Partition 600x50mm (235/8 x2”)
20-64253Partition 400x100mm (15¾x4”)
20-64254Partition 600x100mm (235/8 x4”)
20-64266T-piece for partition
Handles type A can be used
on modules to be inserted in either
SCANCELL carts, open steel carts,
transport carts or cabinets
Accessories modular trays, boxes and baskets
Handles type B can be used
on modules to be inserted in either
SCANCELL carts, open steel
carts, transport carts or cabinets
Containers, trays, baskets, inserts and accessories
Please see modular section
133
6
00
400 600
400
4
Handle with STOP 600mm (235/8”)
4
3
6
5
3
6
00
400
600
400
5 6
1 2
2
1
600
400
600
400
19-61890 gray
19-61891 dark blue
19-61892 yellow
19-61893 red
19-61894 green
19-61895 light blue
19-61880 gray
19-61881 dark blue
19-61882 yellow
19-61883 red
19-61884 green
19-61885 light blue
23-34504Wire basket
300 x 400 x 50mm (11¾ x 15¾ x 2”)with opening on the front edge.Mesh size approx. 36 x 39mm(13/8 x 1½”)
23-34514Wire basket
300 x 400 x 100mm (11¾ x15¾ x 4”)with opening on the front edge.Mesh size approx. 36 x 39mm(13/8 x 1½”)
135
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
RIL
RIL
RIL
RIL
RIL
Wire baskets with partitions
23-34510Wire basket
300 x 400 x 100mm (11¾ x 15¾ x 4”)The basket has double frame wire and stackable corners.Mesh size approx. 23 x 23mm (7/8 x 7/8”)
23-64557Partition 300 x 100mm (11¾ x 4”)
23-64551Partition 400 x 100mm (15¾ x 4”)
23-34520Wire basket
300 x 400 x 200mm (11¾ x 15¾ x 77/8”)The basket has double frame wire and stackable corners.Mesh size approx. 23 x 23mm (7/8 x 7/8”)
23-64558Partition 300 x 200mm (11¾ x 77/8”)
23-64552Partition 400 x 200mm (15¾ x 77/8”)
23-64510Wire basket
600 x 400 x 100mm (235/8 x 15¾ x 4”)The basket has double frame wire and stackable corners.Mesh size approx. 23 x 23mm (1 x 1”)
23-64551Partition 400 x 100mm (15¾ x 4”)
23-64555Partition 600 x 100mm (235/8 x 4”)
23-64520Wire basket
600 x 400 x 200mm (235/8 x 15¾ x 77/8”)The basket has double frame wire and stackable corners.Mesh size approx. 23 x 23mm 1 x 1”)
23-64552Partition 400 x 200mm (15¾ x 77/8”)
23-64556Partition 600 x 200mm (235/8 x 77/8”)
All mesh sizes are taken from the bottom of the wire baskets
11¾ + 11¾
11¾ + 11¾
15¾15¾
15¾15¾
15¾
11¾ + 11¾
11¾ + 11¾
11¾ + 11¾
3
4
5
2
1
3
5
4
3
3
2
2
2
5
5
4
4
1
1
Auto
cla
ve b
ask
ets
I and II
• Stainless steel baskets.
• Stackable.
• Partitions for compartmentalization.
• Autoclavable.
“”
137
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
SS
SS
SS
SS
SS
Autoclave baskets, type I
Type I is a traditional basket, which can be stacked on top of another, taking up the same space filled, as well as empty
24-34540Wire basket 300 x 400 x 100mm
(11¾ x 15¾ x 4”)StackableMesh size approx. 45 x 47mm (1¾ x 17/8”)
24-34541Wire basket 300 x 400 x 200mm
(11¾ x 15¾ x 77/8”)StackableMesh size appox. 45 x 47mm (1¾ x 17/8”)
24-64540Wire basket 600 x 400 x 100mm
(235/8 x 15¾ x 4”)StackableMesh size approx. 45 x 47mm (1¾ x 17/8”)
24-64551Partition 400 x 100mm (15¾ x 4”)
24-64555Partition 600 x 100mm (235/8 x 4”)
24-64542Wire basket 600 x 400 x 150mm
(235/8 x 15¾ x 57/8”)StackableMesh size approx. 45 x 47mm (1¾ x 1 7/8”)
24-64553Partition 400 x 150mm
(15¾ x 57/8”)
24-64541Wire basket 600 x 400 x 200mm
(235/8 x 15¾ x 77/8”)StackableMesh size approx. 45 x 47mm (1¾” x 17/8”)
24-64552Partition 400 x 200mm (15¾ x 77/8”)
24-64556Partition 600 x 200mm (235/8 x 77/8”)
24-64530Wire basket 600 x 400 x 300mm
(235/8 x 15¾ x 11¾”)StackableMesh size approx. 45 x 47mm (1¾” x 17/8”)
24-64557Partition 400 x 300mm
(15¾ x 11¾”)
11¾ + 11¾
11¾ + 11¾
11¾ + 11¾
15¾15¾
15¾15¾
11¾ + 11¾
11¾ + 11¾
15¾
3
4
5
2
1
3
5
4
1
3
2
5
4
4
2
2
1
138
600
400
600
400
600
400
600
600
400
SS
SS
SS
SS
SS
400
Autoclave baskets, type lI
24-64581Wire basket
600 x 400 x 100mm (235/8 x 15¾ x 4”)Stackable
Mesh size approx. 46 x 48mm (1¾ x 17/8”)
24-64586Partition 400 x 100mm (15¾ x 4”)
24-64585Wire basket
600 x 400 x 150mm (235/8 x 15¾ x 57/8”)Stackable
Mesh size approx. 46 x 48mm (1¾ x 17/8”)
24-64587Partition 400 x 150mm (15¾ x 57/8”)
24-64582Wire basket
600x400x 200mm (235/8 x15 ¾ x 77/8”) Stackable
Mesh size approx. 46 x 48mm(1¾ x17/8”)
24-64588Partition 400x200mm (15¾ x 77/8“)
24-64583Wire basket
600 x 400 x 300mm (235/8 x 15¾ x 11¾”)
Mesh size approx. 46 x 48mm (1¾ x 17/8”)
24-64589Partition 400 x 300mm
15¾ x 11¾ “
Type II. When the baskets are filled they
can be stacked on top of each other.
When empty, by turning the baskets180 degrees,
they can then nest inside each other, taking up less
space.
5
4
3
2
2
1
5
4
3
2
1
5
4
3
235/8
235/8
235/8
15¾15¾
15¾15¾
235/8
235/8
15¾
Instru
ment tra
ys
• Injection molded PPO trays resistant
to liquid disinfectants.
• Vacuum formed PVC trays resistant
to liquid disinfectants.
• Trays for the collection of instruments.
• Containers with drain plugs.
• Containers for insertion of stainless steel baskets.
“
”
140
SS
SS
SS
SS
SS
25-64645Tray 250 x 160 x 70mm
(97/8 x 6¼ x 2¾”)
25-64646Tray 250 x 320 x 70mm
(97/8 x 125/8 x 2¾”)
25-62661Handle for trays (each)
For trays
(25-64645 - 25-64646 - 25-64247)
3
4
5
1
2 25-64647Tray 450 x 320 x 70mm
(17¾ x 125/8 x 2¾”)
3
25-64651Tray with handle
250 x 160 x 70mm (17¾ x 125/8 x 2¾”)
25-64652Tray with handle
250 x 320 x 70mm (97/8 x 125/8 x 2¾”)
25-64653Tray with handle
450 x 320 x 70mm (17¾ x 125/8 x 2¾”)
5
4
4
4
2
1
Instrument trays
Produced in stainless plate according to the AISI standard with 5mm diameter holes, in a triangular pattern with 7.5mm between the centres
141
600
400
600
400
PVC
SS
SS
650
450
PVC
650
450
PVC
31-64202 Lid 600 x 400 x 15mm
(235/8 x 15¾ x 5/8 “)
31-64221Box 600 x 400 x 200mm
(235/8 x 15¾ x 77/8”)
31-64222Box 600 x 400 x 200mm
(235/8 x 15¾ x 77/8”)with drain plug
Disinfection containers
31-65221Box 650 x 450 x 220mm
(255/8 x 17¾ x 85/8”)
31-65202Lid 650 x 450 x 10mm
(255/8 x 17¾ x 3/8”)
31-65222Box 650 x 450 x 220mm
(255/8 x 17¾ x 85/8”) with drain plug
31-65202Lid 650 x 450 x 10mm
(255/8 x 17¾ x 3/8”)
31-65223Drain plug for PVC-box 31-65221
containing liquid disinfectant
3
4
5
1
2
24-64545 Stainless steel basket 600 x 400 x 200mm
(235/8 x 15¾ x 77/8”)
for insertion in box (31-65221)
for the collection of soiled instruments
3
3
2
1
1
1
5
4
4
15¾
235/8
255/8
17 3/4
255/8
235/8
17 3/415¾
20-34302Lid/Tray 300 x 400 x 15mm
(11¾ x 15¾ x 5/8”)
For tray/box (20-34311 and 20-34321)
31-34219 Perforated stainless steel, instrument tray
300 x 400 x 170mm (11¾ x 15¾ x 6¾”)
31-34220Partition for stainless steel instrument tray
31-34221 PVC
Lid 300 x 400 x 15mm (11¾ x 15¾ x 5/8”)
with 2 openings
31-34211 PVC
Tray 300 x 400 x 100mm (11¾ x 15¾ x 37/8”)
31-34218 PVC
Tray 300 x 400 x 170mm (11¾ x 15¾ x 6¾”) 31-34202 PVC
Lid 300 x 400 x 15mm (11¾ x 15¾ x 5/8”)
142
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
300 + 300
400
SS/
PVC
PPO
PPO
PPO
PPO
Instrument Trays and boxes
and disinfectant
20-34311Tray 300 x 400 x 100mm
(11¾ x 15¾ x 37/8”)
for liquid disinfectants,
collection of instruments and utensils
20-34303Lid/Tray 300 x 400 x10mm
(11¾ x 15¾ x 3/8”)
For tray/box (20-34311 and 20-34321)
20-34321Box 300 x 400 x 200mm
(11¾ x 15¾ x 77/8”)
for liquid disinfectants
collection of instruments and utensils
3
4
5
1
2
3
1
4
1
1
5
1
1
1
2
11 ¾ +11 ¾
15¾15¾
15¾
11 ¾ +11 ¾
11 ¾ +11 ¾
11 ¾+11 ¾
11 ¾+11 ¾
15¾15¾
20-64311Tray 600 x 400 x 100mm
(235/8 x 15¾ x 4”)
Designed for transport of soiled
instruments in liquid disinfectant
143
300 + 300
400
600
400
600
400
600
400
600
400
PPO/
PC
PPO
PPO
PPO
PPO
Trays and boxes for instrument collection
and disinfection
20-34303Lid tray 300 x 400 x 10mm (11¾ x 15¾ x 3/8”)
with 2 openings
21-62215Sliding lid 240 x 120mm (9½ x 4¾”) - PC
Controls noxious oders and fumes.
Can be used together with
tray 20-34311and box 20-34321
20-64302Lid tray 600 x 400 x 15mm
(235/8 x 15¾ x 5/8”)
For boxes (20-64322 and 20-64328)
20-64328Box 600 x 400 x 280mm
(235/8 x 15¾ x 11”)
Designed for transport of soiled
instruments in liquid disinfectant
20-64322Box 600 x 400 x 200mm
(235/8 x 15¾ x 77/8”)
Designed for transport of soiled
instruments in liquid disinfectant
3
4
5
1
2
3
1
4
5
1
2
15¾
11¾ + 11¾
11¾ + 11¾
15¾
15¾
11¾ + 11¾
11¾ + 11¾
15¾
15¾
11¾ + 11¾
Shelv
es
• Stainless steel or Rilsan coated wire shelves.
• Shelves with raised edges.
• Wire shelves for container transportation/storage.
• Shelves in melamine or high-pressure laminate.
“”
145
300 + 300
400
600
400
300 + 300
400
600
400
300 + 300
400
LAM
LAM
MEL
MEL
SS
Shelves
22-34400Shelf-Laminate
300 x 400 x 6mm(11¾ x 15¾ x 6”)
22-64400Shelf-Laminate
600 x 400 x 6mm
(235/8 x 15¾ x 1/4”)
22-34403Shelf-Melamine
300 x 400 x 12mm
(11¾ x 15¾ x ½”)
22-64403Shelf- Melamine
600 x 400 x 12mm
(235/8 x 15¾ x ½”)
22-34401Shelf with beaded edge
300 x 400 x 15mm
(11¾ x 15¾ x 5/8”)
22-64401Shelf with beaded edge
600 x 400 x 15mm
(235/8 x 15¾ x 5/8”)
3
4
5
1
2
3
5
4
5
2
115¾15¾
11 ¾ + 11 ¾
11 ¾ + 11 ¾
15¾15¾
15¾
11¾ + 11¾
235/8
235/8
146
300 + 300
400
600
400
300 + 300
400
600
400
600
400
SS
SS
SS
RIL
RIL
Wire shelves
22-34501Wire shelf 300 x 400mm
(11¾ x 15¾”)
Mesh size
approx. 22,5 x 22,5mm
(7/8 x 7/8”)
22-64501Wire shelf 600 x 400mm
(235/8 x 15¾”)
Mesh size
approx. 22,5 x 22,5mm
(7/8 x 7/8”)
22-34502Wire shelf 300 x 400mm
(11¾ x 15¾”)
Mesh size
approx. 22,5 x 23,0mm
(7/8 x 7/8”)
22-64502Wire shelf 600 x 400mm
(235/8 x 15¾”)
Mesh size
approx. 22,5 x 23,0mm
(7/8 x 7/8”)
22-64504Wire shelf 600 x 400mm
(235/8 x 15¾”)
for container in DIN size
600 x 300mm
(235/8 x 11¾”)
Mesh size
approx. 22,5 x 23,0mm
(7/8 x 7/8”)
3
4
5
1
2
3
5
4
2
1
11¾ + 11¾
235/8
15¾15¾
15¾15¾
11¾ + 11¾
235/8
235/8
Recommended