View
1
Download
0
Category
Preview:
Citation preview
www.enerpac.com
▼
RC-Series DUO Cylinders, Single-Acting
▼ RC cylinder mounting attachments greatly extend the application possibilities (available for 5, 10,15 and 25 ton cylinders).
▼ Stage lifting set up in Greece, where assembled pipes, 82 feet in length, were stage lifted with six RC-2514 cylinders.
The Industry Standard General Purpose Cylinder
Saddles
All RC cylinders are equipped with hardened removable grooved saddles. For tilt and flat saddles, see
the RC-Series accessory page.
Base Plates
To ensure the stability of cylinders for lifting applications, base plates are available for 10, 25 and 50 ton RC cylinders.
Specialty Attachments
For solving all kinds of application problems, specialty attach ments are available for 5, 10 and 25 ton RC cylinders.
• Unique GR2 Bearing Design, reduces wear, extending life• Collar threads, plunger threads and base mounting holes
enable easy fixturing (on most models)• Designed for use in all positions• High strength alloy steel for durability• Redesigned cylinder thread protector for ease of use• Heavy-duty, pretensioned spring improves retraction
speed• Baked enamel finish for increased corrosion resistance• CR-400 coupler and dust cap included on all models• Plunger wiper reduces contamination, extending
cylinder life
Shown from left to right: RC-506, RC-50, RC-2510, RC-154, RC-10010, RC-55, RC-1010
®
80%
▼ QUICK SELECTION CHARTFor complete technical information see next page.
Single-Acting, General Purpose Cylinders
CylinderEffective
Area
(in2)
CylinderCapacity
tons(maximum)
Stroke
(in)
Collapsed Height
(in)
ModelNumber
OilCapacity
(in3)
Weight
(lbs)
* Available as a set. See note on this page.** RC-50 cylinder has non-removable grooved saddle and no collar thread.
RC Series
Capacity:
5-100 tonsStroke:
.63-14.25 inchesMaximum Operating Pressure:
10,000 psi
Gauges
Minimize the risk of overloading and ensure long, dependable service from your equipment. Refer to
the System Components section for a full range of gauges.
Think Safety
Manufacturer’s rating of load and stroke are maximum safe limits.
Good practice encourages using only 80% of these ratings!
Pump and Cylinder Sets
All cylinders marked with an *
are available as sets (cylinder, gauge, couplers, hose and pump) for your ordering convenience.
RAC-Series, Single-Acting Cylinders
The lightweight generalpurpose spring returnaluminum cylinders.
RC-Series DUO Cylinders maintain external dimensions for use with existing fixtures.
GR2 Bearing Technology
The exclusive GR2 is a unique bearing design on RC-Series DUO cylinders which
absorbs eccentric load stresses to protect your cylinder against abrasion, over-extending or plunger blow-outs and jamming or top-end mushrooming. As a result, RC-Series DUO cylinders provide long, trouble-free operation.
.99
.99
.99
.99
.99
.992.242.24 2.24 2.24 2.24 2.24 2.24 2.24 3.143.143.143.143.143.143.143.145.165.16 5.16 5.16 5.16 5.16 5.16 5.16 6.4911.0411.04 11.04 11.04 15.9015.9020.6320.63
.631.003.005.007.009.131.002.134.136.138.0010.1312.0014.001.002.004.006.008.0010.0012.0014.001.002.004.006.258.2510.2512.2514.258.252.004.006.2513.256.1313.136.6310.25
1.634.346.508.50
10.7512.753.534.786.759.75
11.7513.7515.7517.754.885.887.88
10.6912.6914.6916.6918.695.506.508.50
10.7512.7514.7516.7518.7515.256.948.94
11.1318.1311.2519.3814.0617.69
.62
.992.984.976.969.072.244.759.2313.7017.8922.6526.8431.313.146.2812.5718.8525.1331.4237.7043.985.1610.3120.6332.2342.5552.8663.1873.4953.5622.0944.1869.03146.3497.41208.74136.67211.45
RC-50**RC-51RC-53RC-55*RC-57RC-59RC-101RC-102*RC-104RC-106*RC-108RC-1010*RC-1012RC-1014RC-151RC-152RC-154*RC-156*RC-158RC-1510RC-1512RC-1514RC-251RC-252*RC-254*RC-256*RC-258RC-2510RC-2512RC-2514*RC-308RC-502RC-504RC-506*RC-5013RC-756RC-7513RC-1006RC-10010
2.22.33.34.15.36.14.05.17.29.8
12.014.015.018.07.29.0
11.015.018.021.024.026.013.014.018.022.027.031.036.039.040.033.042.051.083.065.0
130.0130.0160.0
5 (4.9)
10 (11.2)
15 (15.7)
25(25.8)
30 (32.4)
50 (55.2)
75 (79.5)
100 (103.1)
3/8"-18NPTF
V
U
L***M***
D
H
E
A
F
B
D1***
H
W
X
Z
K
A
E
B
O
P
U1
P
O
J
F
V3/8"-18NPTF
DU
RC-Series DUO Cylinders, Single-Acting
Extended Height
B(in)
◀ For full features see page 6.
Stroke
(in)
CylinderCapacity
tons (maximum)
CylinderEffective
Area
(in2)
Collapsed Height
A(in)
ModelNumber
Oil Capacity
(in3)
Outside Diameter
D(in)
RC-50
RC-101 only(U1 = .75 inch)
RC-1006 and RC-10010 models
RC-51 to RC-5013 models
* Available as a set. See page 54.** RC-50 cylinder has non-removable grooved saddle and no collar thread.*** D1 = 1.63 inch, L = .81 inch, M = 1.00 inch.
RC-50**RC-51RC-53RC-55*RC-57RC-59RC-101RC-102*RC-104RC-106*RC-108RC-1010*RC-1012RC-1014RC-151RC-152RC-154*RC-156*RC-158RC-1510RC-1512RC-1514RC-251RC-252*RC-254*RC-256*RC-258RC-2510RC-2512RC-2514*RC-308RC-502RC-504RC-506*RC-5013RC-756RC-7513RC-1006RC-10010
.631.003.005.007.009.131.002.134.136.138.00
10.1312.0014.001.002.004.006.008.00
10.0012.0014.001.002.004.006.258.25
10.2512.2514.258.252.004.006.25
13.256.13
13.136.63
10.25
.99
.99
.99
.99
.99
.992.242.24 2.24 2.24 2.24 2.24 2.24 2.24 3.143.143.143.143.143.143.143.145.165.16 5.16 5.16 5.16 5.16 5.16 5.16 6.49
11.0411.04 11.04 11.04 15.9015.9020.6320.63
1.634.346.508.50
10.7512.753.534.786.759.75
11.7513.7515.7517.754.885.887.88
10.6912.6914.6916.6918.695.506.508.50
10.7512.7514.7516.7518.7515.256.948.94
11.1318.1311.2519.3814.0617.69
5 (4.9)
10 (11.2)
15 (15.7)
25 (25.8)
30 (32.4)
50 (55.2)
75 (79.5)
100 (103.1)
.62
.992.984.976.969.072.244.759.23
13.7017.8922.6526.8431.313.146.28
12.5718.8525.1331.4237.7043.985.16
10.3120.6332.2342.5552.8663.1873.4953.5622.0944.1869.03
146.3497.41
208.74136.67211.45
2.255.349.50
13.5017.7521.884.536.91
10.8815.8819.7523.8827.7531.755.887.88
11.8816.6920.6924.6928.6932.696.508.50
12.5017.0021.0025.0029.0033.0023.508.94
12.9417.3831.3817.3832.5020.6927.94
2.311.501.501.501.501.502.252.252.252.252.252.252.252.252.752.752.752.752.752.752.752.753.383.383.383.383.383.383.383.384.005.005.005.005.005.755.757.007.00
®www.enerpac.com
Single-Acting, General Purpose Cylinders
CylinderBore Diam.
E(in)
PlungerDiam.
F(in)
Base toAdv. Port
H(in)
SaddleDiam.
J(in)
Weight
(lbs)
Plunger Thread Length
P(in)
Saddle Protrusion from Plngr.
K(in)
PlungerInternal Thread
O(in)
Base Mounting Holes ModelNumber
CollarThread
W(in)
CollarThreadLength
X(in)
Thread
V(in)
Thrd. Depth
Z(in)
BoltCircle
U(in)
RC Series
Capacity:
5-100 tonsStroke:
.63-14.25 inchesMaximum Operating Pressure:
10,000 psi
Couplers Included!
CR-400 couplers included on all models.Fits all HC-Series hoses.
RC-50**RC-51RC-53RC-55*RC-57RC-59RC-101RC-102*RC-104RC-106*RC-108RC-1010*RC-1012RC-1014RC-151RC-152RC-154*RC-156*RC-158RC-1510RC-1512RC-1514RC-251RC-252*RC-254*RC-256*RC-258RC-2510RC-2512RC-2514*RC-308RC-502RC-504RC-506*RC-5013RC-756RC-7513RC-1006RC-10010
1.131.131.131.131.131.131.691.691.691.691.691.691.691.692.002.002.002.002.002.002.002.002.562.562.562.562.562.562.562.562.883.753.753.753.754.504.505.135.13
1.001.001.001.001.001.001.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.631.631.631.631.631.631.631.632.252.252.252.252.252.252.252.252.253.133.133.133.133.753.754.134.13
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.751.001.001.001.001.001.001.001.001.001.001.001.001.002.251.311.311.381.381.191.191.631.63
**1.001.001.001.001.00
–1.381.381.381.381.381.381.381.501.501.501.501.501.501.501.502.002.002.002.002.002.002.002.002.002.812.812.812.812.812.812.812.81
**.56.56.56.63.63.25.75.75.75.75.75.75.75
1.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.001.00————————
2.22.33.34.15.36.14.05.17.29.8121415187.29
1115182124261314182227313639403342518365
130130160
**.25.25.25.25.25–
.25
.25
.25
.25
.25
.25
.25
.38
.38
.38
.38
.38
.38
.38
.38
.41
.41
.41
.41
.41
.41
.41
.41
.41
.11
.11
.11
.11
.23
.23
.11
.11
**¾"-16¾"-16¾"-16¾"-16¾"-16
#10-24un
1"- 81"- 81"- 81"- 81"- 81"- 81"- 81"- 81"- 81"- 81"- 81"- 81"- 81"- 81"- 8
1½"-161½"- 161½"- 161½"- 161½"- 161½"- 161½"- 161½"- 161½"- 16
————————
.22¼"-20un
¼"-20un
¼"-20un
¼"-20un
¼"-20un
5•16"-18un
5•16"-18un
5•16"-18un
5•16"-18un
5•16"-18un
5•16"-18un
5•16"-18un
5•16"-18un
⅜"-16un
⅜"-16un
⅜"-16un
⅜"-16un
⅜"-16un
⅜"-16un
⅜"-16un
⅜"-16un
½"-13un
½"-13un
½"-13un
½"-13un
½"-13un
½"-13un
½"-13un
½"-13un
—½"-13un
½"-13un
½"-13un
½"-13un
——
¾"-10un
¾"-10un
—1.131.131.131.131.131.061.131.061.131.061.131.061.061.191.191.191.191.191.191.191.191.941.941.941.941.941.941.941.941.942.192.192.192.191.751.751.751.75
—.56.56.56.56.56.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.75.75.75.75.75.75.75.75—.75.75.75.75——
1.001.00
1.131.001.001.001.001.001.561.561.561.561.561.561.561.561.881.881.881.881.881.881.881.882.312.312.312.312.312.312.312.31—
3.753.753.753.75——
5.505.50
—1½"-161½"-161½"-161½"-161½"-162¼"-142¼"-142¼"-142¼"-142¼"-142¼"-142¼"-142¼"-142¾"-162¾"-162¾"-162¾"-162¾"-162¾"-162¾"-162¾"-1635•16"-1235•16"-1235•16"-1235•16"-1235•16"-1235•16"-1235•16"-1235•16"-1235•16"-12
5"-125"-125"-125"-12
5¾"-125¾"-1267/8"-1267/8"-12
www.enerpac.com
CD
E H
FG
AB
B
E
D G
F
AH
DC
B
E C
A
B
E
GJ
D
F
A
C
H
C
AB
A
B
C
0-5°
A
B 0-5°
E FB
AC D D
AC
EFB
D
A
CE
B
C
D
B
AE
BC
A
C
AB
Tilt
For Use with
Cylinder Capacity
(tons)
Cylinder Accessories
Flat Grooved1) Tilt Base4) Plunger
Base Plate
Saddles MountingBlock
Clevis Eyes
Base4)
Plunger
Model Number
Model Number
Type
A B C D
A
A
B C D E F
A B C
Model Number B C D E F G H
JBI-10, -25
REB REP
AW-51 AW-102 (J=.19)RB-5, -10 RB-15, -25 AW-53
JBI-50
Tilt Saddle Dimensions (in)
Mounting Block Dimensions (in)
Clevis Eye Dimensions (in)
1) Standard on 5-30 ton RC-cylinders 2) Except RC-50 3) Except RC-101 4) Mounting screws are included.
Tilt
Pin to Pin*
(in)
Grooved
A B C
Saddle Dimensions (in)
Flat
▼ DIMENSION CHARTS
Model Number
A-53FA-102FA-12A-29
A-53GA-102GA-152GA-252G
Model Number
CAT-10CAT-50
CAT-100
Base Plate Dimensions (in)
* Pin to Pin– REB and REP Clevises fitted. Add cylinder collapsed height.4) Mounting screws are included.
▼ SELECTION CHART
E
RB-52), AW-512), AW-532)
RB-10, AW-102RB-15RB-25RB-25
–––
–
JBI-10–
JBI-25–
JBI-50––
5
101525305075100
REB-5REB-10REB-15REB-25 REP-5REP-10REP-25
RB-5AW-51AW-53RB-10AW-102RB-15RB-25
JBI-10JBI-25
JBI-50
9.0011.00
12.00
9.0011.00
.60
5.345.53
3.75
2.293.41
5.19
.811.03
1.25
1.752.503.003.75 1.131.692.25
1.882.632.633.13 1.622.432.93
.561.001.001.50 .561.001.50
.63
.88
.881.25 .63.881.25
.631.001.001.25 .631.001.25
1.001.381.381.63.751.131.38
1½"-161½"-161½"-162¼"-142¼"-142¾"-1635/16"-12
3.502.762.874.503.944.005.00
3.002.36.283.503.254.506.50
–.43.31–
.63––
1.00.98.751.001.181.502.00
–2.132.25
–3.00
––
–¼"-20¼"-20
–7/16"-20
––
–1.62.41–
2.31––
REB-52)
REB-10REB-15 REB-25
––––
REP-52)
REP-103)
REP-10REP-25REP-25
–––
2.373.073.073.45———
.68
.881"-8unC
1½"-16un
.68
.88
.881.40
1.001.382.002.00
1.001.381.501.97
.25
.241.881.88
.25
.24
.37
.37
A-53F2)
A-123), A-102F3)
–A-29A-29
–––
A-53G2)
A-102G3)
A-152GA-252GA-252G
–––
–
CAT-103)
CAT-10CAT-50CAT-50CAT-100CAT-100 CAT-100
.881.40
–
.79
.83
.98
1.381.97
2.80
®
1
2
3
4
5
7
6
80%
▼
The Enerpac Lightweight Aluminum Cylinders
• Lightweight, easy to carry and position to allow a highercylinder capacity-to-weight-ratio
• Non-corrosive by design, aluminum has always been a goodmaterial for use in many caustic environments
• Composite bearings on all moving surfaces guarantee NOmetal-to-metal contact, to resist side loads and increasecylinder life
Capacity:
20-150 tonsStroke:
1.97-7.87 inchesMaximum Operating Pressure:
10,000 psi
1. Removable Hardened Saddleprotects plunger from being damagedby abrasive surface contact.
2. Stop Ring on all models absorbseccentric loading and prevents plungerover-extension.
3. Composite Bearing material toprevent metal-to-metal contact,reducing side-load issues andincreasing life.
4. Hard-coated Plunger and Baseresist wear and prevent galling.
5. 7075-T6 Aluminum AlloyComponents for maximum strengthand minimum weight.
6. Plunger Return Spring on all single-acting models for prompt cylinderreturn.
7. Standard Steel Base Plate protectscylinder base from abrasive surfaces.
RASeries
RACL-Series, Lock Nut Cylinders
The lightweight spring returnaluminum cylinders for mechanical load holding.
RACH-Series, Hollow Plunger Cylinders
For both push and pull forces with a single-acting cylinders.
RAR-Series, Double-Acting Cylinders
The lightweight aluminum cylinders for lifting and lowering.
RAC-Series, Single-Acting Cylinders
The lightweight generalpurpose spring returnaluminum cylinders.
Think Safety
Manufacturer’s rating of load and stroke are maximum safe limits.
Good practice encourages using only 80% of these ratings!
Shown: RAC, RACL, RACH, and RAR
www.enerpac.com
▼
RAC-202RAC-204RAC-206RAC-302RAC-304RAC-306RAC-502RAC-504RAC-506RAC-1004RAC-1006RAC-1008RAC-1506
RAC-Series, Single-Acting Aluminum Cylinders
Lightweight for Maximum Portability
Shown from left to right: RAC-508, RAC-1506, RAC-304, and RAC-206
• Composite bearings prevent metal-to-metal contact,increasing cylinder life and resistance to side-loadsof up to 10%
• Hard coat finish on all surfaces resists damage andextends cylinder life
• Handles included on all models• Steel baseplate and saddle for protection against
load-induced damage• Integral stop ring prevents plunger over-travel and is
capable of withstanding the full cylinder capacity• High-strength return spring for rapid cylinder retraction• CR-400 coupler and dustcap included on all models• All cylinders meet ASME B-30.1 and ISO 10100 standards
Saddles
All RAC cylinders are equipped with bolt-on removable saddles of hardened steel.
Aluminum Lock Nut Cylinders
When positive mechanical load holding is required, the lightweight RACL-Series Aluminum Lock Nut cylinders are the ideal choice.
CylinderCapacity
(tons) [maximum]
Stroke*
(in)
ModelNumber
CylinderEffective
Area
(in2)
Lightweight Hand Pumps
Enerpac hand pumps P-392 or P-802 make the optimal lightweight set.
◀ Enerpac lightweight aluminum RAC-506 cylinders are ideal for wet environments such as this tunnel under the river (Holland High-Speed Train Line).
* Custom strokes available.
1.973.945.911.973.945.911.973.945.913.945.917.875.91
4.834.834.836.856.856.85
10.9910.9910.9922.1922.1922.1935.18
20[24.1]
30[34.2]
50[54.9]
100[110.9]
150 [175.9]
®
RAC-202RAC-204RAC-206RAC-302RAC-304RAC-306RAC-502RAC-504RAC-506RAC-1004RAC-1006RAC-1008RAC-1506
H
K
AE
B
V
Z
J
F
3/8"-18 NPTF
DU
K1
J10-5˚CATG-50
CATG-150CATG-200
RAC-50RAC-100RAC-150
Single-Acting, Spring Return Cylinders
ModelNumber
Weight
(lbs)
SaddleProtrusion
from Plunger
K(in)
SaddleDiameter
J(in)
Base toAdvance
Port
H(in)
PlungerDiameter
F(in)
CylinderBore
Diameter
E(in)
OutsideDiameter
D(in)
Extended Height
B(in)
Collapsed Height
A(in)
OilCapacity
(in3)
Aluminum vs. Steel
Aluminum cylinders, while offering the most lightweight solution for many lifting, stressing and lowering applications, also have some unique limitations due to material properties.
Aluminum differs from steel in that it has a lower finite fatigue life. This means aluminum cylinders should NOT be used in high-cycle applications such as production.The Enerpac line of aluminum cylinders are designed to provide 5,000 cycles at their recommended pressure. This limit should not be exceeded. In normal lifting and many maintenance applications, this should provide a lifetime of use.
RAC Series
Capacity:
20-150 tonsStroke:
1.97-7.87 inchesMaximum Operating Pressure:
10,000 psi
Cylinder Model / Capacity
(ton)
Saddle Diameter
J1
Optional Bolt Tilt Saddle Dimensions (in) Model Number
Saddle Protrusion from Base
K1
Steel Base Plate
The steel base plate protects the cylinder base from damage, it should not be removed.
The base holes in these aluminum cylinders are designed for securing the steel base plate. They will not withstand the capacity of the cylinder.
Do not use the base holes in these aluminum cylinders to attach any device to the cylinder.
ThreadDepth 1)
Z(in)
Thread
V(mm)
BoltCircle
U
(in)
Steel Base Plate Mounting Holes CylinderModel / Capacity
(ton)
1) Including Base Plate Height of .25 inches.Four (4) base plate bolts: M6
9.5119.0228.5213.4826.9740.4521.6343.2764.9087.36131.04174.72207.76
6.858.8210.797.139.0911.067.329.2911.2610.6712.6414.6113.49
8.8212.7616.699.0913.0316.979.2913.2317.1714.6118.5422.4819.40
3.353.353.353.943.943.945.125.125.127.097.097.099.06
2.482.482.482.952.952.953.743.743.745.315.315.316.69
1.971.971.972.362.362.363.153.153.154.334.334.335.51
1.571.571.571.571.571.571.971.971.973.703.703.704.45
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
7.99.0
10.19.9
11.513.018.721.624.543.248.353.473.4
1.071.071.071.311.311.311.191.191.191.821.821.822.02
1.953.574.64
1.021.301.44
.47
.47
.47
.47
.47
M6M6M6M6M6
2.763.154.336.307.87
RAC-20RAC-30RAC-50RAC-100RAC-150
.25
Recommended