Origami en Ingles

IntroductionWhere it all began…

Chinese Wood Plate

Sheep Skin in place of paper

Mulberry Tree Paper Making

Discovery of new

glue

Separation of Skin from the

branch

Origami Zoo

Kangaroo, Gorilla, Camel and Reindeer

The Sea world

Goldfish

Ray and Carp

The World of Birds

Java Sparrow

Swan flamingo and standing

crane

Birds

Raven

Beautiful Flowers

White Flower

Hydrangea and a snail

HOW TO MAKE AN ORIGAMI CRANE

1. Fold in Half diagonally. Hold in Half diagonally again, creating 2 triangles.

2. Hold again in Half, following the marked line in picture 2, only not diagonally, but rather separating the perfect square in half.

3. Repeat step 2 to create 4 perfect folded squares.4. Facing the color, from the 4 perfect squares follow the folded

inwards bents, bring them together

5. The other 2 sticking out sides smoothly bring together to one point6. Bring the whole construction to the shape of one square7. Flip the unconnected side up from both sides8. Bent the outside edges inwards from both sides to create the ice-cream shape(don’t exactly follow and look at the picture 8 – its extra)

15. Skip 13-14 to bring yourselves to the picture 15, where you open the just bent sides of the squares back to their original share. you should have once again a perfect square shape, only now with the bent sides.16. Here come the tricky part – open up the outside side of the square so you will have an open pocket. Follow the lines that you have just created in 12, but now bent the sides INSIDE and fold the open half of the square. Do the same on the other side and bring everything to the same point. The shape should look once again like an ice cream cone. When you are done, you need to open up the front and the back, leaving the top untouched creating a shape of a diamond shape. The headOf the cone should remain under the ‘wings’ that you just bended up.

17. IMPORTANT! With your diamond shape, find one of the sides and bent inwards the sides that are away from the head along the middle crack, previously created, untouched. 18. Repeat for all four sides.19. Holding all four sides, hold them OUT.20. Bring the sides that are away from the head- towards the head by bending them upwards.

21&23. Unfold the sides of the crane as shown on the pictureabove from the middle24. Make the head and the tail by bending the ends!!!

YOU HAVE DONE IT!!!!!

THE END