View
217
Download
0
Category
Preview:
Citation preview
8/3/2019 OILAID-AI-10 PD
1/3
QUALITYWORLDWIDE SINCE 1968 Drilling Mud, Workover & Completion Chemicals, Fluid Systems & Engineering Services
Cement Additives Stimulation, Production & Refinery Chemicals Laboratory Testing Equipment Visit Messina's Website: WWW.MESSINA-OILCHEM.COM
OILAID-AI-10
LOW TO MEDIUM TEMPERATURE ACID INHIBITOR
DESCRIPTION
OILAID-AI-10 is an acid corrosion inhibitor designed to inhibit the attack of hydrochloric acid onsteel pipe during acidizing operations. Its typical properties are:
Form Dark amber/red, thin liquidSpecific Gravity @ 20 C Approx. 0.95 1.00Flash Point 82 C.Freezing Point -45 CSolubility: Water Dispersible
Acid Dispersible
Diesel Temporarily DispersibleHAN Insoluble
OILAID-AI-10 is a blend of acetylenic alcohols and surfactants in a balanced solvent system.
APPLICATION AND TREATMENT
OILAID-AI-10 acid inhibitor is effective at all temperatures up to 107 C (225 F). Within it'sapplicable temperature range, it is an excellent inhibitor because it focuses on providing goodperformance and good economics.
OILAID-AI-10 functions very well in low to high strength acid systems (15% - 28% HCl), andremains functional in the presence of mutual solvents. It should be added to the mixing water prior toloading operations for proper dispersion. The following loadings are recommended:
CONCENTRATION OF OILAID-AI-10 IN GAL/1000 GAL HCl/
15% HClExposure Time
6 Hours 24 HoursLoading / Corrosion Rate GPT / lbs/ft2 GPT / lbs/ft2Temperature
Up to 52 C 0.5 /0.021 1.0 / 0.00853 C to 65 C 0.8 / 0.011 1.5 / 0.031
66 C to 80 C 2.0 / 0.018 3.0 / 0.01081 C to 94 C 3.0 / 0.013 7.0 / 0.01895 C to 107 C 8.0 / 0.012 ********
or 4.0 + 10.0 of
8/3/2019 OILAID-AI-10 PD
2/3
PRODUCT DATA
OILAID-AI-10 Page 2 of 3
QUALITYWORLDWIDE SINCE 1968 Drilling Mud, Workover & Completion Chemicals, Fluid Systems & Engineering Services
Cement Additives Stimulation, Production & Refinery Chemicals Laboratory Testing Equipment Visit Messina's Website: WWW.MESSINA-OILCHEM.COM
OILAID-AIA-22
20% HCl
Exposure Time
6 Hours 24 Hours
Loading / Corrosion Rate GPT / lbs/ft2 GPT / lbs/ft2
TemperatureUp to 52 C 0.8 /0.017 1.5 / 0.01253 C to 65 C 1.5 / 0.025 4.0 / 0.00666 C to 80 C 3.0 / 0.006 6.0 / 0.00881 C to 94 C 4.0 / 0.019 12.0 / 0.011
28% HCl
Exposure Time
6 Hours 24 Hours
Loading / Corrosion Rate GPT / lbs/ft2 GPT / lbs/ft2
Temperature
Up to 52 C 2.5 /0.006 3.0 / 0.00653 C to 65 C 3.0 / 0.020 7.0 / 0.02866 C to 80 C 6.0 / 0.007 20.0 0.003 or
6.0 + 20.0 GPTOILAID-AIA-22 / 0.007
81 C to 94 C 15.0 / 0.024 20.0 + 20.0 OILAID-AIA-22 / 10.0 + 10.0 0.007OILAID-AIA-22 / 0.007
HANDLING AND STORAGE
OILAID-AI-10 is a Flammable liquid, Corrosive--UN No. 2924. Extreme care should therefore beexercised when handling and storing the product. It should be stored away from flames, directsunlight and other heat sources. Should be stored where temperatures will remain between 10 C and+50 C. If done so, and not opened or contaminated, the material should remain effective for at least 2years.
8/3/2019 OILAID-AI-10 PD
3/3
PRODUCT DATA
OILAID-AI-10 Page 3 of 3
QUALITYWORLDWIDE SINCE 1968 Drilling Mud, Workover & Completion Chemicals, Fluid Systems & Engineering Services
Cement Additives Stimulation, Production & Refinery Chemicals Laboratory Testing Equipment Visit Messina's Website: WWW.MESSINA-OILCHEM.COM
SAFETY
The following procedures should be adopted.
Inhalation: Remove to fresh air.Eye Contact: Wash eyes with copious amounts of water and seek medical attention.Skin Contact: Wash affected area with copious quantities of water.Ingestion: Drink milk/water. Do not induce vomiting. Seek medical attention immediately.
IMPORTANT: Observe warning labels on containers.
PACKAGING
OILAID-AI-10 is packaged in 200 L (or 55 U.S. gal ) metallicdrums.
OILAID-AI-10 is a Messina trademark.
Recommended