View
0
Download
0
Category
Preview:
Citation preview
List of Publications and PhD Students
Peer reviewed papers 1. L.C.E. Huberts, R. Goedhart & R.J.M.M. Does (2020), “Improved control chart
performance using cautious parameter learning”, Submitted for publication.
2. B.A. Lameijer, H. Boer, J. Antony & R.J.M.M. Does (2020), “Continuous improvement deployment models: A reconciliation and holistic metamodel”, Submitted for publication.
3. L.C.E. Huberts, M. Schoonhoven & R.J.M.M. Does (2020), “Monitoring student progress: A case study to predict student success or failure”, Submitted for publication.
4. B.A. Lameijer, J. Antony, A. Chakraborty, R.J.M.M. Does & J.A. Garza-Reyes (2020), “The role of organizational motivation and coordination in continuous improvement implementations: An empirical research of improvement project success”, Accepted for publication in Total Quality Management & Business Excellence.
5. R.J.M.M. Does, R. Goedhart & W.H. Woodall (2020), “On the design of control charts with guaranteed conditional performance under estimated parameters”, Accepted for publication in Quality and Reliability Engineering International.
6. M.D. Diko, R. Goedhart & R.J.M.M. Does (2020), “A head-to-head comparison of the out-of-control performance of control charts adjusted for parameter estimation”, Accepted for publication in Quality Engineering.
7. R. Goedhart, M. Schoonhoven & R.J.M.M. Does (2020), “Nonparametric control of the conditional performance in Statistical Process Monitoring”, Accepted for publication in Journal of Quality Technology.
8. M.D. Diko, S. Chakraborti & R.J.M.M. Does (2019), “An alternative design of the two-sided CUSUM chart for monitoring the mean when parameters are estimated”, Computers & Industrial Engineering 137, article number 106042.
9. M.D. Diko, S. Chakraborti & R.J.M.M. Does (2019), “Guaranteed in-control performance of the EWMA chart for monitoring the mean”, Quality and Reliability Engineering International 35(4), pp. 1144-1160.
10. L.C.E. Huberts, M. Schoonhoven & R.J.M.M. Does (2019), “The effect of continuously updating control chart limits on control chart performance”, Quality and Reliability Engineering International 35(4), pp. 1111-1128.
11. L.C.E. Huberts, M. Schoonhoven, R. Goedhart, M.D. Diko & R.J.M.M. Does (2018), “The performance of X-bar control charts for large non-normally distributed datasets”, Quality and Reliability Engineering International 34(6), pp. 979-996.
12. R. Goedhart, M. Schoonhoven & R.J.M.M. Does (2018), “Letter to the Editor: On guaranteed in-control performance for the Shewhart X and X-bar control charts”, Journal of Quality Technology 50(1), pp. 130-132.
R.J.M.M. Does IBIS UvA Plantage Muidergracht 12 1018 TV Amsterdam The Netherlands
+31 20 5256024 +31 6 51289546 r.j.m.m.does@uva.nl www.ibisuva.nl July 2020
13. R. Goedhart, M. Schoonhoven & R.J.M.M. Does (2018), “Discussion of “50
Years of the Journal of Quality Technology””, Journal of Quality Technology 50(1), pp. 17-19.
14. B.A. Lameijer, I.M. Zwetsloot & R.J.M.M. Does (2018), “Discussion of “Quality and Statistical Thinking in a Parliament and Beyond””, Quality Engineering 30(1), pp. 27-33.
15. B.A. Lameijer, J. de Mast & R.J.M.M. Does (2017), “Lean Six Sigma deployment and maturity models: a critical review”, Quality Management Journal 24(4), pp. 6-20.
16. M.D. Diko, R. Goedhart, S. Chakraborti, R.J.M.M. Does & E.K Epprecht (2017), “Phase II control charts for monitoring process dispersion when parameters are estimated”, Quality Engineering 29(4), pp. 605-622.
17. R. Goedhart, M.M. da Silva, M. Schoonhoven, E.K. Epprecht, S. Chakraborti, R.J.M.M. Does & Á. Veiga (2017), “Shewhart control charts for dispersion adjusted for parameter estimation”, IISE Transactions 49(8), pp. 838-848.
18. R. Goedhart, M. Schoonhoven & R.J.M.M. Does (2017), “Guaranteed in-control performance for the Shewhart X and X-bar control charts”, Journal of Quality Technology 49(2), pp. 155-171.
19. R. Goedhart, M. Schoonhoven, I.M. Zwetsloot & R.J.M.M. Does (2017),
“Discussion of “Bridging the Gap between Theory and Practice in Basic Statistical Process Monitoring””, Quality Engineering 29(1), pp. 18-21.
20. R. Goedhart, M. Schoonhoven & R.J.M.M. Does (2016), “Correction factors for Shewhart X and X-bar control charts to achieve desired unconditional ARL”, International Journal of Production Research 54(24), pp. 7464-7479.
21. B.A. Lameijer, R.J.M.M. Does & J. de Mast (2016), “Inter-industry generic Lean Six Sigma project definitions”, International Journal of Lean Six Sigma 7(4), pp. 369-393.
22. H.Z. Nazir, N. Abbas, M. Riaz & R.J.M.M. Does (2016), “A comparative study of
memory-type control charts under normal and contaminated normal environments”, Quality and Reliability Engineering International 32(4), pp. 1347-1356.
23. I.M. Zwetsloot, M. Schoonhoven & R.J.M.M. Does (2016), “Robust point location estimators for the EWMA control chart”, Quality Technology and Quantitative Management 13(1), pp. 29-38.
24. B.A. Lameijer, D.T.J. Veen, R.J.M.M. Does & J. de Mast (2016), “Perceptions of Lean Six Sigma: a multiple case study in the financial services industry”, Quality Management Journal 23(2), pp. 29-56.
25. B. Zaman, M. Riaz, N. Abbas & R.J.M.M. Does (2015), “Mixed Cumulative Sum – Exponentially Weighted Moving Average control charts: an efficient way of monitoring process location”, Quality and Reliability Engineering International 31(8), pp. 1407-1421.
26. I.M. Zwetsloot, M. Schoonhoven & R.J.M.M. Does (2015), “A robust Phase I
Exponentially Weighted Moving Average chart for dispersion”, Quality and Reliability Engineering International 31(6), pp. 989-999.
27. N. Abbas, M. Riaz & R.J.M.M. Does (2015), “Enhancing the performance of EWMA charts: discussion”, Quality and Reliability Engineering International 31(4), pp. 721-722.
28. H.Z. Nazir, M. Riaz & R.J.M.M. Does (2015), “Robust CUSUM control charting for process dispersion”, Quality and Reliability Engineering International 31(3), pp. 369-379.
29. R.J.M.M. Does, J. de Mast & M. Schoonhoven (2015), “Discussion of “An emerging science of improvement in healthcare””, Quality Engineering 27(1), pp. 35-40.
30. I.M. Zwetsloot, M. Schoonhoven & R.J.M.M. Does (2014), “A robust estimator for location in phase I based on an EWMA chart”, Journal of Quality Technology 46(4), pp. 302-316.
31. N. Abbas, M. Riaz & R.J.M.M. Does (2014), “An EWMA-type control chart for monitoring the process mean using auxiliary information”, Communications in Statistics – Theory and Methods 43(16), pp. 3485-3498.
32. N. Abbas, M. Riaz & R.J.M.M. Does (2014), “Memory-type control charts for monitoring the dispersion parameter”, Quality and Reliability Engineering International 30(5), pp. 623-632.
33. M. Schoonhoven & R.J.M.M. Does (2013), “A robust X-bar control chart”, Quality and Reliability Engineering International 29(7), pp. 951-970.
34. M. Schoonhoven & R.J.M.M. Does (2013), “Response to the letter to the editor concerning articles on robust estimation techniques for SPC”, Journal of Quality Technology 45(4), pp. 397-398.
35. G.C. Niemeijer, E. Flikweert, A. Trip, R.J.M.M. Does, K.T.B. Ahaus, A. Boot & K.W. Wendt (2013), “The usefulness of Lean Six Sigma to the development of a clinical pathway for hip fractures”, Journal of Evaluation in Clinical Practice 19(5), pp. 909-914.
36. N. Abbas, M. Riaz & R.J.M.M. Does (2013), “CS-EWMA chart for monitoring
process dispersion”, Quality and Reliability Engineering International 29(5), pp. 653-663.
37. H.Z. Nazir, M. Riaz, R.J.M.M. Does & N. Abbas (2013), “Robust CUSUM control charting”, Quality Engineering 25(3), pp. 211-224.
38. R. Mehmood, M. Riaz & R.J.M.M. Does (2013), “Efficient power computation for r out of m runs rules schemes”, Computational Statistics 28(2), pp. 667-681.
39. N. Abbas, M. Riaz & R.J.M.M. Does (2013), “Mixed EWMA-CUSUM charts for
process monitoring”, Quality and Reliability Engineering International 29(3), pp. 345-356.
40. J. van den Heuvel, G.C. Niemeijer & R.J.M.M. Does (2013), “Measuring health
care quality: the challenges”, International Journal of Health Care Quality Assurance 26(3), pp. 269-278.
41. R. Mehmood, M. Riaz & R.J.M.M. Does (2013), “Control charts for location based on different sampling schemes”, Journal of Applied Statistics 40(3), pp. 483-494.
42. G.C. Niemeijer, A. Trip, K.W. Wendt, L.J. de Jong & R.J.M.M. Does, (2012), “Impact of five years Lean Six Sigma in a university medical center”, Quality Management in Health Care 21(4), pp. 262-268.
43. J. Lokkerbol, R.J.M.M. Does, J. de Mast & M. Schoonhoven (2012), “Improving processes in financial service organizations: where to begin?”, International Journal of Quality and Reliability Management 29(9), pp. 981-999.
44. M. Schoonhoven & R.J.M.M. Does (2012), “A robust standard deviation control
chart”, Technometrics 54(1), pp. 73-82. 45. J. de Mast, B.P.H. Kemper, R.J.M.M. Does, M.R.H. Mandjes & H.W.J. van der
Bijl (2011), “Process improvement in healthcare: A model for overall resource efficiency”, Quality and Reliability Engineering International 27(8), pp. 1095-1106.
46. M. Riaz, R. Mehmood & R.J.M.M. Does (2011), “On the performance of different
control charting rules”, Quality and Reliability Engineering International 27(8), pp. 1059-1067.
47. M. Schoonhoven, H.Z. Nazir, M. Riaz & R.J.M.M. Does (2011), “Robust location
estimators for the X-bar control chart”, Journal of Quality Technology 43(4), pp. 363-379.
48. M. Schoonhoven, M. Riaz & R.J.M.M. Does (2011), “Design and analysis of
control charts for standard deviation with estimated parameters”, Journal of Quality Technology 43(4), pp. 307-333.
49. N. Abbas, M. Riaz & R.J.M.M. Does (2011), “Enhancing the performance of
EWMA charts”, Quality and Reliability Engineering International 27(6), pp. 821-833.
50. M. Riaz, N. Abbas & R.J.M.M. Does (2011), “Improving the performance of
CUSUM charts”, Quality and Reliability Engineering International 27(4), pp. 415-424.
51. G.C. Niemeijer, R.J.M.M. Does, J. de Mast, A. Trip & J. van den Heuvel (2011),
“Generic project definitions for improvement of health care delivery: a case-based approach”, Quality Management in Health Care 20(2), pp. 152-164.
52. R.J.M.M. Does, J. van den Heuvel, J. de Mast & G.C. Niemeijer (2010),
“Improving quality in healthcare while reducing costs", Quality Management Forum 36(3), pp. 12-15.
53. G.C. Niemeijer, A. Trip, K.T.B. Ahaus, R.J.M.M. Does & K.W. Wendt (2010),
“Quality in Trauma Care: Improving the discharge procedure of patients with Lean Six Sigma” Journal of Trauma 69(3), pp. 614-619.
54. J. de Mast & R.J.M.M. Does (2010), “Discussion of “Statistical thinking and
methods in quality improvement””, Quality Engineering 22(3), pp. 130-132. 55. H. de Koning, R.J.M.M. Does, A. Groen & B.P.H. Kemper (2010), “Generic Lean
Six Sigma project definitions in publishing”, International Journal of Lean Six Sigma 1(1), pp. 39-55.
56. M. Schoonhoven & R.J.M.M. Does (2010), “The X-bar control chart under non-
normality”, Quality and Reliability Engineering International 26(2), pp. 167-176. 57. M. Schoonhoven, M. Riaz & R.J.M.M. Does (2009), “A comparison of different
design schemes for the X-bar chart”, Quality and Reliability Engineering International 25(5), pp. 581-594.
58. M. Riaz & R.J.M.M. Does (2009), “A process variability control chart”,
Computational Statistics 24(2), pp. 345-368. 59. R.J.M.M. Does, M.B. Vermaat, J.P.S. Verver, J. van den Heuvel & S. Bisgaard
(2009), “Reducing start time delays in operating rooms”, Journal of Quality Technology 41(1), pp. 95-109.
60. M. Riaz & R.J.M.M. Does (2009), “Robust process monitoring – A bivariate
case”, Quality Engineering 21(1), pp. 63-71. 61. H. de Koning, J. de Mast, R.J.M.M. Does, M.B. Vermaat & S. Simons (2008),
“Generic Lean Six Sigma project definitions in financial services” Quality Management Journal 15(4), pp. 32-45.
62. M.B. Vermaat, F.H. van der Meulen & R.J.M.M. Does (2008), “Asymptotic
behavior of the variance of the EWMA statistic for autoregressive processes” Statistics and Probability Letters 78(12), pp. 1673-1682.
63. M.B. Vermaat, R.J.M.M. Does & S. Bisgaard (2008), “EWMA control chart limits
for first- and second-order autoregressive processes” Quality and Reliability
Engineering International 24(5), pp. 573-584.
64. H. de Koning, R.J.M.M. Does & S. Bisgaard (2008), “Lean Six Sigma in financial
services” International Journal of Six Sigma and Competitive Advantage 4(1), pp. 1-17.
65. J. de Mast & R.J.M.M. Does (2008), “Discussion of “An overview of the Shainin System for quality improvement”” Quality Engineering 20(1), pp. 20-22.
66. R.J.M.M. Does, M.B. Vermaat, H. de Koning, S. Bisgaard & J. van den Heuvel
(2006), “Standardizing healthcare projects” Six Sigma Forum Magazine 6(1), pp. 14-23.
67. J. van den Heuvel, R.J.M.M. Does & H. de Koning (2006), “Lean Six Sigma in a
hospital” International Journal of Six Sigma and Competitive Advantage 2(4), pp. 377-388.
68. J. de Mast & R.J.M.M. Does (2006), “Industrial statistics: a discipline with
opportunities and challenges.” Statistica Neerlandica 60(3), pp. 270-283. 69. J. van den Heuvel, A.J.J.C. Bogers, R.J.M.M. Does, S.S. van Dijk & M. Berg
(2006), “Quality management: Does it pay off?” Quality Management in Health Care 15(3), pp. 137-149.
70. J. van den Heuvel, R.J.M.M. Does, A.J.J.C. Bogers & M. Berg (2006),
“Implementing Six Sigma in the Netherlands” Joint Commission Journal on Quality and Patient Safety 32(7), pp. 393-399.
71. H. de Koning, J.P.S. Verver, J. van den Heuvel, S. Bisgaard & R.J.M.M. Does
(2006), “Lean Six Sigma in healthcare.” Journal of Healthcare Quality 28(2), pp. 4-11.
72. M.B. Vermaat & R.J.M.M. Does (2006), “A semi-Bayesian method for Shewhart
individuals control charts.” Quality Technology and Quantitative Management 3(1), pp. 111-125.
73. J. van den Heuvel, R.J.M.M. Does & J.P.S. Verver (2005), “The application of
Six Sigma in health care: lessons learned from a hospital.” The International Journal of Six Sigma and Competitive Advantage 1(4), 380-388.
74. M.B. Vermaat, R.J.M.M. Does & A.G.M. Steerneman (2005), “A modified quantile
estimator using extreme-value theory with applications.” Economic Quality Control 20(1), 31-39.
75. J. van den Heuvel, R.J.M.M. Does & S. Bisgaard (2005), “Dutch hospital
implements Six Sigma.” Six Sigma Forum Magazine 4(2), 11-14. 76. J. van den Heuvel, R.J.M.M. Does & M.B. Vermaat (2004), “Six Sigma in a
Dutch hospital: does it work in the nursing department?” Quality and Reliability Engineering International 20, 419-426.
77. M.B. Vermaat, R.A. Ion, R.J.M.M. Does & C.A.J. Klaassen (2003), “A
comparison of Shewhart individuals control charts based on normal, nonparametric, and extreme-value theory.” Quality and Reliability Engineering International 19, 337-353.
78. S. Bisgaard, R.J.M.M. Does & D.J. Stewardson (2002), “European statistics
network grows rapidly: Aims to increase understanding, idea exchange, networking and professional development.” Quality Progress 35(12), 100-101.
79. R.J.M.M. Does & A. Trip (2001), “The impact of statistics in industry and the
role of statisticians.” Austrian Journal of Statistics 30, 7-20. 80. J. de Mast, K.C.B. Roes & R.J.M.M. Does (2001), “The Multi-Vari chart – a
systematic approach.” Quality Engineering 13, 437-447.
81. J. de Mast, W.A.J. Schippers, R.J.M.M. Does & E.R. van den Heuvel (2000),
“Steps and strategies in reducing process variation.” Quality and Reliability Engineering International 16, 301-311.
82. A.J. Koning & R.J.M.M. Does (2000), “Cusum charts for preliminary analysis of
individual observations.” Journal of Quality Technology 32, 122-131. 83. E.S. Tan, A.W. Ambergen, R.J.M.M. Does & Tj. Imbos (1999), “Approximations
of normal IRT models for change.” Journal of Educational and Behavioral Statistics 24, 208-223.
84. R.J.M.M. Does, K.C.B. Roes & A. Trip (1999), “Handling multivariate problems
with univariate control charts.” Journal of Chemometrics 13, 353-369. 85. K.C.B. Roes, R.J.M.M. Does & B.S. Jonker (1999), “Effective application of
Q(R) charts in low volume manufacturing.” Quality and Reliability Engineering International 15, 175-190.
86. R.J.M.M. Does, W.A.J. Schippers & A. Trip (1997), “A framework for
implementation of statistical process control.” International Journal of Quality Science 2, 181-198.
87. R.J.M.M. Does & K.C.B. Roes (1996), “Industrial statistics and its recent
contributions to total quality in the Netherlands.” Statistica Neerlandica 50, 27-51.
88. E.S. Tan, Tj. Imbos, R.J.M.M. Does & M. Theunissen (1995), “An optimal
unbiased classification rule for mastery testing based on longitudinal data.” Educational and Psychological Measurement 55, 595-612.
89. K.C.B. Roes & R.J.M.M. Does (1995), “Shewhart-type charts in nonstandard
situations (with discussion).” Technometrics 37, 15-40. 90. E.S. Tan, Tj. Imbos & R.J.M.M. Does (1994), “A distribution free approach for
comparing growth of knowledge.” Journal of Educational Measurement 31, 51-65.
91. K.C.B. Roes, R.J.M.M. Does & Y. Schurink (1993), “Shewhart-type control
charts for individuals.” Journal of Quality Technology 25, 188-198. 92. R.J.M.M. Does & B.F. Schriever (1992), “Variables control chart limits and tests
for special causes.” Statistica Neerlandica 46, 229-245. 93. E.S. Tan, J.M.A. Roos, A. Volovics, M.A. van Baak & R.J.M.M. Does (1992),
“An interactive computer program for randomization analysis of response curves with facilities for multiple comparisons.” Computers and Biomedical Research 25, 101-116.
94. L.W.G. Strijbosch, R.J.M.M. Does & W. Albers (1990), “Multiple-dose design
and bias-reducing methods for limiting dilution assays.” Statistica Neerlandica 44, 241-261.
95. L.W.G. Strijbosch, R.J.M.M. Does & W. Albers (1990), “Design methods for
some dose-response models.” Statistics in Medicine 9, 1353-1363. 96. W. Albers, R.J.M.M. Does, Tj. Imbos & M.P.E. Janssen (1989), “A stochastic
model applied to repeated tests of academic knowledge.” Psychometrika 54, 451-466.
97. L.W.G. Strijbosch & R.J.M.M. Does (1989), “Computer programs for the
experimental design and statistical evaluation of limiting dilution assays.” American Statistician 43, 275-276.
98. G.M.E. Janssen, J.W.J. van Wersch, V. Kaiser & R.J.M.M. Does (1989), “White
cell system changes associated with a training period of 18-20 months: a transverse and a longitudinal approach.” International Journal of Sports
Medicine 10 (Supplement), S176-S180.
99. G.M.E. Janssen, H. Kuipers, G.M. Willems, R.J.M.M. Does, M.P.E. Janssen &
P. Geurten (1989), “Plasma activity of muscles enzymes: quantification of skeletal muscle damage and relationship with metabolic variables.” International Journal of Sports Medicine 10 (Supplement), S160-S168.
100. G.J. van der Vusse, G.M.E. Janssen, W.A. Coumans, H. Kuipers, R.J.M.M.
Does & F. ten Hoor (1989), “Effect of training and 15-, 25- and 42-km contests on the skeletal muscle content of adenine and guanine nucleotides, creatine phosphate and glycogen.” International Journal of Sports Medicine 10 (Supplement), S146-S152.
101. F.J.T. Verstappen, G.M.E. Janssen & R.J.M.M. Does (1989), “Effects of
endurance training and competition on exercise tests in relatively untrained people.” International Journal of Sports Medicine 10 (Supplement), S126-S131.
102. R.J.M.M. Does, G.M.E. Janssen, M.P.E. Janssen & F.M.H. Wuts (1989),
“Statistical methods used in the marathon study.” International Journal of Sports Medicine 10 (Supplement), S124-S125.
103. R.J.M.M. Does, L.W.G. Strijbosch & W. Albers (1988), “Using jackknife
methods for estimating the parameter in dilution series.” Biometrics 44, 1093-1102.
104. L.W.G. Strijbosch, R.J.M.M. Does & W.A. Buurman (1988), “Computer aided
design and evaluation of limiting and serial dilution experiments.” International Journal of Bio-Medical Computing 23, 279-290.
105. L.W.G. Strijbosch & R.J.M.M. Does (1988), “Comparison of bias-reducing
methods for estimating the parameter in dilution series.” Communications in Statistics-Simulation and Computation B17, 1173-1190.
106. R.J.M.M. Does, R. Helmers & C.A.J. Klaassen (1988), “Approximating the
distribution of Greenwood's statistic.” Statistica Neerlandica 42, 153-161. 107. A.J. Koning & R.J.M.M. Does (1988), “Approximating the percentage points of
simple linear rank statistics.” Journal of the Royal Statistical Society Series C: Applied Statistics 37, 278-284.
108. W. Weber, W.A. Buurman, Z. Jingwu & R.J.M.M. Does (1988), “Human myelin
basic protein-specific cytotoxic T lymphocyte clones are HLA class II restricted.” Transplantation Proceedings 20, 320-321.
109. R.J.M.M. Does, R. Helmers & C.A.J. Klaassen (1987), “On the Edgeworth
expansion for the sum of a function of uniform spacings.” Journal of Statistical Planning and Inference 17, 149-157.
110. J. Mooy, M. van Baak, R. Böhm, R.J.M.M. Does, H. Petri, J. van Kemenade &
K.H. Rahn (1987), “The effects of verapamil and propranolol on exercise tolerance in hypertensive patients.” Clinical Pharmacology & Therapeutics 41, 490-495.
111. L.W.G. Strijbosch, W.A. Buurman, R.J.M.M. Does, P.H. Zinken & G.
Groenewegen (1987), “Limiting dilution assays: experimental design and statistical evaluation.” Journal of Immunological Methods 97, 133-140.
112. R.J.M.M. Does (1984), “The asymptotic behavior of simple linear rank statistics.”
Statistica Neerlandica 38, 109-130. 113. R.J.M.M. Does & C.A.J. Klaassen (1984), “Second order asymptotics for
statistics based on uniform spacings.” In: Asymptotic Statistics, Volume 2, P. Mandl & M. Hušková (eds.), North-Holland, Amsterdam, 231-239.
114. R.J.M.M. Does (1984), “Asymptotic expansions for simple linear rank statistics
under contiguous alternatives.” In: Asymptotic Statistics, Volume 2, P. Mandl &
M. Hušková (eds.), North-Holland, Amsterdam, 221-230.
115. R.J.M.M. Does & C.A.J. Klaassen (1984), “The Berry-Esseen theorem for
functions of uniform spacings.” Zeitschrift für Wahrscheinlichkeitstheorie und verwandte Gebiete 65, 461-471.
116. M.E.J. van Hooff, R.J.M.M. Does, K.H. Rahn & M.A. van Baak (1983), “Time
course of blood pressure changes after intravenous administration of propranolol and furosemide in hypertensive patients.” Journal of Cardiovascular Pharmacology 5, 773-777.
117. W.A. Buurman, A.J.J.M. Daemen, G. Groenewegen, R.J.M.M. Does, C.J. van der
Linden & P.A. Vegt (1983), “Limiting dilution analysis of canine alloantigen reactive T lymphocytes.” Transplantation 35, 363-367.
118. R.J.M.M. Does (1983), “An Edgeworth expansion for simple linear rank statistics
under the null-hypothesis.” Annals of Statistics 11, 607-624. 119. R.J.M.M. Does & R. Helmers (1982), “Edgeworth expansions for functions of
uniform spacings.” In: Colloquia Mathematica Societatis J. Bolyai, Volume 32: Nonparametric Statistical Inference, B.V. Gnedenko, M.L. Puri & I. Vincze (eds.), North Holland, Amsterdam, 203-212.
120. R.J.M.M. Does (1982), “Berry-Esseen theorems for simple linear rank statistics
under the null-hypothesis.” Annals of Probability 10, 982-991.
Books
1. R.J.M.M. Does, R.W. Hoerl, M. Kulahci & G.G. Vining (editors) (2017), “Søren Bisgaard’s Contributions to Quality Engineering”, ASQ Quality Press, Milwaukee, Wisconsin, ISBN: 978-0-87389-956-7, 437 pages.
2. J. de Mast, R.J.M.M. Does, H. de Koning & J. Lokkerbol (2016), “Lean Six Sigma for Services and Healthcare”, second edition, Beaumont, Alphen aan den Rijn, ISBN-978-90-79452-00-2, 170 pp.
3. R.J.M.M. Does, H. de Koning & J. de Mast (2015), “Lean Six Sigma, stap voor stap.”, fourth edition. Beaumont, Alphen aan den Rijn, ISBN-978-90-79452-02-6, 100 pp.
4. R.J.M.M. Does & J. de Mast (2006), “Six Sigma, stap voor stap.”, third edition.
Beaumont, Alphen aan den Rijn, ISBN-10: 90-809277-5-9, 72 pp. 5. J. de Mast, R.J.M.M. Does & H. de Koning (2006), “Lean Six Sigma for Service
and Healthcare”, Beaumont, Alphen aan den Rijn, ISBN-13 978-90-809277-3-5, 144 pp.
6. R.J.M.M. Does, E.R. van den Heuvel, J. de Mast, W.A.J. Schippers, A. Trip &
J.E. Wieringa (2001), “Zes Sigma zakelijk verbeterd.” Samsom, Alphen aan den Rijn/Deventer, ISBN 90 140 7668 1, 360 pp.
7. R.J.M.M. Does, K.C.B. Roes & A. Trip (1999), “Statistical Process Control in
Industry.” Kluwer Academic, Dordrecht, ISBN 0-7923-5570-9, 231 pp. 8. R.J.M.M. Does, K.C.B. Roes & A. Trip (1996), “Statistische Procesbeheersing in
Bedrijf.” Kluwer Bedrijfswetenschappen, Deventer, ISBN 90 267 2189 7, 263 pp. 9. P.J.A. Banens, R.J.M.M. Does, G.B.W. van Dongen, J. Engel, M.M.A. Hasselaar,
R.A.J.M. van Lieshout, J. Praagman, B.F. Schriever, A. Trip & H. van der Veen (1994), “Industriële Statistiek en Kwaliteit.” Kluwer Bedrijfswetenschappen, Deventer, ISBN 90 201 2864 7, 432 pp.
10. W.C.M. Kallenberg, J. Beirlant, P. van Blokland, J.J. Dik, R.J.M.M. Does, A.J. van
Es, R.D. Gill, P.L.J. Janssen, P.J.M. Kallenberg, C.A.J. Klaassen, E. Opperdoes, C. van Putten, B.F. Schriever, M. Vandermaele & C.J. Warmer (1984), “Testing
Statistical Hypotheses: Worked Solutions.” CWI Syllabus 3, Centrum voor Wiskunde en Informatica, Amsterdam, ISBN 90 6196 280 3, 310 pp.
11. R.J.M.M. Does (1982), “Higher Order Asymptotics for Simple Linear Rank
Statistics.” Mathematical Centre Tract 151, Mathematisch Centrum, Amsterdam, ISBN 90 6196 2439, 91 pp.
Quality Quandaries:
Quartely Columns in
Quality Engineering
edited by R.J.M.M.
Does (2010-2016)
1. A. Kuiper, R. van de Hoef, M. Wesseling, B.A. Lameijer & R.J.M.M. Does
(2016), “Improving a customer value stream at a financial service provider”, Quality Engineering 28(1), pp. 155-163.
2. T.S. Akkerhuis, G.C. Niemeijer, A. Trip, R.J.B.J. Gemke & R.J.M.M. Does (2015), “Precision and accuracy of ear thermometry”, Quality Engineering 27(4), pp.512-521.
3. I.M. Zwetsloot, M. Buitenhuis, B.A. Lameijer & R.J.M.M. Does (2015), “Increasing the first time fix rate in a customer contact center”, Quality Engineering 27(3), pp. 393-400.
4. T.S. Akkerhuis, C.M. Spanjaard, S.E. Nuijten, O.G. Berendes & R.J.M.M. Does (2015), “Realizing strategic goals at a business school”, Quality Engineering 27(2), pp.267-273.
5. I.M. Zwetsloot & R.J.M.M. Does (2015), “Improving revenue by attracting more clients online”, Quality Engineering 27(1), pp. 130-137.
6. A. Kuiper, M. van Raalte & R.J.M.M. Does (2014), “Improving the overall equipment effectiveness at a pharmaceutical company”, Quality Engineering 26(4), pp. 478-483.
7. R. Mehmood, M. Riaz & R.J.M.M. Does (2014), “On the application of different rank set sampling schemes”, Quality Engineering 26(3), pp. 370-378.
8. H.Z. Nazir, M. Schoonhoven. M. Riaz & R.J.M.M. Does (2014), “A stepwise approach for setting up a robust Shewhart location control chart”, Quality Engineering 26(2), pp. 246-252.
9. H.Z. Nazir, M. Schoonhoven. M. Riaz & R.J.M.M. Does (2014), “How to set up a robust Shewhart control chart for dispersion?”, Quality Engineering 26(1), pp. 130-136.
10. T.P. Erdmann, W.W.L.M. Janssen & R.J.M.M. Does (2013), “Streamlining the procurement process at a media and entertainment company”, Quality Engineering 25(4), pp. 455-460.
11. J. de Mast, B.P.H. Kemper, A. Wiltjer & R.J.M.M. Does (2013), “Deploying operational excellence at a financial service provider”, Quality Engineering 25(3), pp. 298-306.
12. M. Schoonhoven, C. Lubbers & R.J.M.M. Does (2013), “Shortening the throughput time of a hospital’s billing process”, Quality Engineering 25(2), pp. 188-193.
13. T.P. Erdmann, H. Boessenkool, L. Hogewoning & R.J.M.M. Does (2013), “Reducing work in process at an emergency assistance center”, Quality Engineering 25(1), pp. 78-84.
14. G.C. Niemeijer, A. Trip, K.T.B. Ahaus, K.W. Wendt & R.J.M.M. Does (2012),
“Reducing overuse of diagnostic tests for trauma patients”, Quality Engineering 24(4), pp. 558-563.
15. J. Lokkerbol, M.A.F. Molenaar & R.J.M.M. Does (2012), “An efficient public sector”, Quality Engineering 24(3), pp. 431-435.
16. J. Mooren, J. de Mast & R.J.M.M. Does (2012), “The case of premature drill wear-out”, Quality Engineering 24(2), pp. 354-359.
17. J. Lokkerbol, M.A.M. Schotman & R.J.M.M. Does (2012), “Personal injuries: a case study”, Quality Engineering 24(1), pp. 102-106.
18. M. Schoonhoven, B.P.H. Kemper, M.I. Brilleman & R.J.M.M. Does (2011), “Streamlining the path to optimal care for cardiovascular patients”, Quality Engineering 23(4), pp. 388-394.
19. B.P.H. Kemper, S. Koning, T.C.W. Luijben & R.J.M.M. Does (2011), “Cost and quality in postal service”, Quality Engineering 23(3), pp. 302-308.
20. J. de Mast, G. Diepstraten & R.J.M.M. Does (2011), “Design for Six Sigma: method and application”, Quality Engineering 23(2), pp. 204-211.
21. K. van Leeuwen & R.J.M.M. Does (2011), “Lean Nursing”, Quality Engineering 23(1), pp. 94-99.
22. A. Trip & R.J.M.M. Does (2010), “Interpretation of signals from runs rules in Shewhart control charts”, Quality Engineering 22(4), pp. 351- 357.
23. T.P. Erdmann, M. de Groot & R.J.M.M. Does (2010), “Improving the invoicing process of a consulting company”, Quality Engineering 22(3), pp. 214-221.
24. T.P. Erdmann, S. Bisgaard & R.J.M.M. Does (2010), “A Gage R&R study in a hospital”, Quality Engineering 22(1), pp. 46-53.
25. B.P.H. Kemper, M. Koopmans & R.J.M.M. Does (2009), “The availability of
infusion pumps in a hospital”, Quality Engineering 21(4), pp. 471-477.
26. J. Wijma, A. Trip, R.J.M.M. Does & S. Bisgaard (2009), “Health care quality:
Efficiency improvement in a nursing department”, Quality Engineering 21(2), pp. 222-228.
27. S. Bisgaard & R.J.M.M. Does (2009), “Health care quality: Reducing the length of
stay at a hospital”, Quality Engineering 21(1), pp. 117-131.
28. R.J.M.M. Does, E.R. van den Heuvel, J. de Mast & S. Bisgaard (2002),
“Comparing nonmanufacturing with traditional applications of Six Sigma.” Quality Engineering 15(1), 177-182.
Other
1. R.J.M.M. Does & B.A. Lameijer (2020), “Chapter 6 – Solution Identification and Deployment”. in: Handbook of Statistical Engineering. Early view on www.isea-change.org.
2. B.A. Lameijer, J. Antony, A. Chakraborty, R.J.M.M. Does & J.A. Garza-Reyes (2019), “The role of organizational motivation and coordination in continuous improvement implementations: an empirical research of process improvement project success”. Proceedings of 26th EurOMA Conference, European Operations Management Association, Helsinki, Finland, pp. 1489-1498.
3. R.J.M.M. Does & M. Schoonhoven (2016), “Guest editorial to the special issue on the third Stu Hunter research conference”, Quality Engineering 28(1), pp. 2.
4. R.J.M.M. Does & J. de Mast (2015), “Six Sigma method”, Wiley StatsRef:
Statistics Reference Online (ISBN 9781118445112), Wiley, New York.
5. R.J.M.M. Does & L.J. de Jong (2014), “An industry approach transforms healthcare: a seven year journey”, EFMD Global Focus 8(3), pp. 15-18.
6. A. Kuiper, M. van Raalte & R.J.M.M. Does (2014), “Het verhogen van de Overall Equipment Effectiveness bij een farmaceutisch bedrijf”, Sigma 6 december 2014, pp. 16-20.
7. R.J.M.M. Does & G.G. Vining (2014), “Editorial to the special issue on the first Stu Hunter research conference”, Quality Engineering 26(1), pp. 2-4.
8. R.J.M.M. Does & A. Trip (2013), “Interpreteren van signaleringsregels van de Shewhart regelkaart”, Sigma 13/2 (April 2013), pp. 38-42.
9. J. de Mast & R.J.M.M. Does (2013), “Ook bestuur moet evidencebased werken (2)”, Medisch Contact 12 (21 March 2013), pp. 629.
10. B.P.H. Kemper, M. Koopmans & R.J.M.M. Does (2011), “Lean Six Sigma in een ziekenhuis: de beschikbaarheid van infuuspompen”, Sigma 11/2 (April 2011), pp. 6-11.
11. R.J.M.M. Does (2010), “Toekomstvisie op het vak en het beroep”, Synaps 31,
pp. 30-32. 12. J. de Mast, S. Bisgaard & R.J.M.M. Does (2009), “Wat komt er na Lean Six
Sigma?”, Kwaliteit in Bedrijf 25(9), pp. 34-37. 13. A. Trip, L.J. de Jong & R.J.M.M. Does (2009), “Betere en efficiëntere zorg met
Lean Six Sigma”, Kwaliteit in de Zorg 19(5), pp. 8-11. 14. R.J.M.M. Does, M.B. Vermaat, H. de Koning, S. Bisgaard & J. van den Heuvel
(2009), “Standardizing healthcare projects; generic templates are useful for early DMAIC phases”, In: Solutions to the Healthcare Quality Crisis, S. Bisgaard (ed.), ASQ Quality Press, Milwaukee, Wisconsin, pp. 151-168.
15. J. van den Heuvel, R.J.M.M. Does & S. Bisgaard (2009), “Dutch hospital
implements Six Sigma: even small projects can make a big difference.” In: Solutions to the Healthcare Quality Crisis, S. Bisgaard (ed.), ASQ Quality Press, Milwaukee, Wisconsin, pp. 41-48.
16. R.J.M.M. Does, M.B. Vermaat, J.P.S. Verver, J. van den Heuvel & S. Bisgaard
(2009), “Operating with maximum efficiency: Red Cross and Canisius Wilhelmina Hospitals”, Minitab Case Studies May 2009.
17. P.D.F. van Daalen & R.J.M.M. Does (2009), “De tien grootste valkuilen bij Lean
Six Sigma”, Kwaliteit in Bedrijf 25(2), pp. 6-9. 18. R.J.M.M. Does & H. de Koning (2008), “De praktijk van Lean Six Sigma”,
Kwaliteit in de Praktijk Cases 20, pp. 1-19. 19. R.J.M.M. Does (2008), “Historie en ontwikkeling van Lean Six Sigma”, Kwaliteit
in Bedrijf 24(8), pp. 10-14. 20. R.J.M.M. Does & J. van den Heuvel (2008), “Organizational excellence in
healthcare”, In: The Theories and Practices of Organizational Excellence: New Perspectives, Chapter Three, K.J. Foley & P. Hermel (eds), Sai Global, Sydney, Australia, pp. 77-103.
21. R.J.M.M. Does (2008), “Efficiëntie, doeltreffendheid en patiëntveiligheid in de
zorg”, Kwaliteit in de Zorg 18(4), pp. 18-19. 22. M. van Rensen, L. Kluter, R.J.M.M. Does & A. Trip (2008), “Minder bureaucratie
dankzij Lean Six Sigma”, Kwaliteit in Bedrijf 24(6), pp. 10-14. 23. A. Trip & R.J.M.M. Does (2008), “Lean Six Sigma blijkt het ideale middel om
betere zorg te krijgen tegen lagere kosten”, Kwaliteit in Bedrijf 24(5), pp. 6-9.
24. R.J.M.M. Does & A. Zempléni (2008), “Statistical consulting units at
universities.” In: Statistical Practice in Business and Industry, S. Coleman, T. Greenfield, D. Stewardson & D.C. Montgomery (eds), Wiley, London, pp. 41-52.
25. R.J.M.M. Does & A. Trip (2008), “A statistician in industry.” In: Statistical
Practice in Business and Industry, S. Coleman, T. Greenfield, D. Stewardson & D.C. Montgomery (eds), Wiley, London, pp 29-33.
26. R.J.M.M. Does & J. de Mast (2007), “Sigma metric (Sigma level)”, Encyclopedia
of Statistics in Quality and Reliability, F. Rugerri, F. Faltin & R. Kenett (eds), Wiley, New York.
27. R.J.M.M. Does & J. de Mast (2007), “Six Sigma method”, Encyclopedia of
Statistics in Quality and Reliability, F. Rugerri, F. Faltin & R. Kenett (eds), Wiley, New York.
28. J. van den Heuvel & R.J.M.M. Does (2007), “Six Sigma werkt ook in de zorg”,
Synaps 24, pp. 38-39. 29. R.J.M.M. Does, J. de Mast, H. de Koning & S. Bisgaard (2007), “The scientific
underpinning of Lean Six Sigma”, Bulletin of the International Statistical Institute, Volume LXII, INE, Lisbon, Portugal, pp. 1560-1566.
30. J. van den Heuvel & R.J.M.M. Does (2007), “Doelmatigheid, kwaliteit en veiliger
zorg?”, ZM Magazine 2007(4), pp. 5-7 31. R.J.M.M. Does & J. de Mast (2006), “Lean Six Sigma en innovatie.” Synaps 21,
pp. 17-22. 32. R.J.M.M. Does & J. de Mast (2006), “Editorial introduction to the special issue
on Industrial Statistics.” Statistica Neerlandica 60(3), pp. 269. 33. R.J.M.M. Does & H. de Koning (2006), “Applying Lean and Six Sigma in financial
service”, Proceedings of the Second International Conference on Six Sigma, J. Anthony &. M. Kumar (eds), CRISSPI, Glasgow, 315-327.
34. J. van den Heuvel, R.J.M.M. Does & H. de Koning (2006), “An application of
Lean Six Sigma in a hospital”, Proceedings of the Second International Conference on Six Sigma, J. Anthony &. M. Kumar (eds), CRISSPI, Glasgow, 299-314.
35. H. de Koning, R.J.M.M. Does & J. de Mast (2005), “Lean Six Sigma.” Kwaliteit in
Bedrijf 21/8, 10-13. 36. J. de Mast & R.J.M.M. Does (2005), “Six Sigma als blauwdruk voor de
kenniseconomie.” Sigma 05/3, 28-29. 37. R.J.M.M. Does & J. de Mast (2005), “Six Sigma” Kwaliteit in Praktijk F28, 1-32. 38. R.J.M.M. Does & J. de Mast (2004), “Six Sigma deployment strategy.”
Proceedings of the Six Sigma International Conference, Wroclaw University of Technology, Poland, 33-40.
39. R.J.M.M. Does, J. de Mast & M.B. Vermaat (2003), “Successen nu ook
beschikbaar voor het MKB: Six Sigma Light.” Kwaliteit in Bedrijf 19(8), 30-33. 40. R.J.M.M. Does & A. Trip (2003), “Statistisch modelleren voor efficiëntere
processen.” Kwaliteit in Praktijk F15, 1-22. 41. R.J.M.M. Does, J. van den Heuvel & A.M.F. Koning (2003), “Six Sigma: een
uitdaging voor de gezondheidszorg.” Kwaliteit in Beeld 2003(2), 4-6. 42. A.M.F. Koning, R.J.M.M. Does & J. van den Heuvel (2003), “Opbrengst Six
Sigma overtreft alle verwachtingen.” Kwaliteit in Bedrijf 19(3), 6-10.
43. J. van den Heuvel, A.M.F. Koning & R.J.M.M. Does (2002), “Rode Kruis
Ziekenhuis in Beverwijk op zoek naar goede verbetersystematiek.” Kwaliteit in Bedrijf 18(9), 12-14.
44. E.R. van den Heuvel, R.J.M.M. Does & A. Trip (2002), “Statistisch modelleren in
de industrie.” Kwaliteit in Bedrijf 18(2), 30-34. 45. R.J.M.M. Does & J. de Mast (2001), “Six Sigma voor de Nederlandse markt.”
Sigma 01/4, 12-17. 46. R.J.M.M. Does & A. Zempléni (2001), “Establishing a commercial statistical
consulting unit at universities.” Kwantitatieve Methoden 67, 51-63. 47. R.J.M.M. Does, E.R. van den Heuvel, J. de Mast & J.E. Wieringa (2000),
“Experiences with quantitative quality programs in industry.” Proceedings of the 44th Annual EOQ Congress, Volume S, P. Molnár & F. Boross (eds), HNC for EOQ, Budapest, pp. 98-105.
48. R.J.M.M. Does & E.R. van den Heuvel (1999), “Zakelijk Verbeter Programma.”
In: Processen in Beweging, D. van de Lagemaat en P. de Mos (red.), Samson, Deventer, 47-60.
49. R.J.M.M. Does (1999), “Real-life problems and industrial statistics.” In: Bulletin of
the International Statistical Institute, Proceedings of the 52nd Session of the ISI, Tome LVII, Book 2, Edita, Helsinki, Finland, pp. 391-394.
50. C.G.M. Oudshoorn, E.R. van den Heuvel & R.J.M.M. Does (1998), “Het 6 kwaliteitsprogramma.” Kwantitatieve Methoden 58, 103-120.
51. R.J.M.M. Does & E.R. van den Heuvel (1998), “‘Zes Sigma’ -
kwaliteitsprogramma maakt opbrengsten van werken aan kwaliteit duidelijk zichtbaar.” Kwaliteit in Bedrijf 14 (3), 14-17.
52. R.J.M.M. Does & K.C.B. Roes (1997), “Statistische procesbeheersing in de
dienstverlening: een onderzoek naar de toepassing van SPC in de dienstverlening.” Sigma 97/5, 20-25.
53. E.R. van den Heuvel, C.G.M. Oudshoorn & R.J.M.M. Does (1997), “Six sigma
quality programs.” Proceedings of the Workshop on Statistics at Universities: Its Impact for Society, A. Zempléni (ed.), Eötvös University Press, Budapest, pp. 83-92.
54. W.A.J. Schippers & R.J.M.M. Does (1997), “Implementing statistical process
control in industry: the role of statistics and statisticians.” Proceedings of the Workshop on Statistics at Universities: Its Impact for Society, A. Zempléni (ed.), Eötvös University Press, Budapest, pp. 65-82.
55. R.J.M.M. Does (1997), Industrial statistics at the University of Amsterdam,
Proceedings of the Workshop on Statistics at Universities: Its Impact for Society, A. Zempléni (ed.), Eötvös University Press, Budapest, pp. 57-64.
56. R.J.M.M. Does (1996), “Aan de slag met statistische procesbeheersing (SPC).”
Kwantitatieve Methoden 53, 31-45. 57. R.J.M.M. Does (1996), “De invloed van de statistiek op het bedrijfsleven.”
Kwantitatieve Methoden 53, 27-29. 58. R.J.M.M. Does, K.C.B. Roes & A. Trip (1995), “A general set-up for designing
control charts in a mixed model.” In: Proceedings of the 6th seminar of the EOQ Committee on Statistical Methods in Budapest, EOQ Committee on Statistical Methods, Bern, Switzerland, pp. 58-71.
59. R.J.M.M. Does (1995), “Kwaliteitscontrole.” In: Management voor Ingenieurs,
Kluwer Bedrijfswetenschappen, Deventer, 3.4.2/01-3.4.2/19.
60. R.J.M.M. Does (1995), “Statistiek is voor veel bedrijven een shocktherapie.”
Athenaeum Illustre 2, 51-52. 61. R.J.M.M. Does (1995), “De doorbraak van de industriële statistiek.” Athenaeum
Illustre 2, 16-20. 62. R.J.M.M. Does (1995), “Statistisch denken is voor total quality van het grootste
belang.” Kwaliteit in Bedrijf 11(3), 6-11. 63. R.J.M.M. Does (1995), “Industriële statistiek: verkopen we knollen voor
citroenen?” Kwantitatieve Methoden 49, 19-28. 64. R.J.M.M. Does, M.L. van Oord & A. Trip (1994), “Een succesvolle implementatie
van statistische procesbeheersing (SPC).” Sigma 94/6, 10-13. 65. R.J.M.M. Does, S.M.M. de Laat, J. Praagman & B.F. Schriever (1993), “Het
gebruik van industriële statistiek bij ISO-9001.” Sigma 93/6, 24-27. 66. R.J.M.M. Does (1993), “Het statistische denken in het bedrijf: verleden en
heden.” Sigma 93/5, 27-29. 67. R.J.M.M. Does & J.G. de Gooijer (1992), “Statistische kwaliteitsbeheersing
binnen de Nederlandse industrie.” Sigma 92/6, 23-25. 68. R.J.M.M. Does (1992), “Industriële statistiek: waarborg voor kwaliteit.” Sigma
92/6, 2-6. 69. R.J.M.M. Does (1992), “Industriële statistiek waarborgt kwaliteit”, Inaugurele
Rede d.d 20 mei 1992. Kwantitatieve Methoden 40, 129-141. 70. Tj. Imbos, R.J.M.M. Does, M.P.E. Janssen, F.E.S. Tan & M. Verwijnen (1990), “A
statistical model for the measurement of growth in medical knowledge.” In: Proceedings of the Third International Congress on Teaching Assessment and Clinical Competence; W. Bender, R.J. Hiemstra, A.J.J.A. Scherpbier & R.P. Zwiersma (eds.), Boekwerk, Groningen, pp. 219-226.
71. R.J.M.M. Does, W. Albers, Tj. Imbos & M.P.E. Janssen (1989), “Een stochastisch
groeimodel toegepast bij herhaald toetsen van medische kennis.” Kwantitatieve Methoden 32, 9-20.
72. E.S. Tan, R.J.M.M. Does, J.M.A. Roos & A. Volovics (1989), “Mucra: een
interactief computer programma voor randomisatie analyse voor groeicurven met een faciliteit voor herhaald toetsen.” In: Symposiumbundel Statistische Software 1989, J.G. Bethlehem e.a. editors, CBS, Voorburg, pp. 219-234.
73. R.J.M.M. Does, L.W.G. Strijbosch & W.A. Buurman (1989), “Dilution Series:
experimental design and statistical analysis.” In: Proceedings of the I-st World Congress on Mathematical Statistics and Probability, Nauka Publishing House, Moscow.
74. Tj. Imbos, E.S. Tan, R.J.M.M. Does, C.T. Geerligs & C.P.M. van der Vleuten
(1988), “The development and evaluation of a measurement instrument for essay-writing.” Onderzoek van Onderwijs 35, Rijksuniversiteit Limburg, Maas-tricht, 30 pp.
75. G.H.M.I. Beusmans & R.J.M.M. Does (1988) “Werkafspraken in het Diagnostisch
Centrum Maastricht.” Huisarts en Wetenschap 31, 154-158. 76. G.M.E. Janssen, H. Kuipers, H.A. Keizer, P. Geurten, G. van Kranenburg &
R.J.M.M. Does (1987), “Spierbeschadiging, prestatievermogen en herstel na ver-schillende soorten wegwedstrijden.” Geneeskunde en Sport 20, 190-195.
77. L.W.G. Strijbosch, R.J.M.M. Does & W.A. Buurman (1987), “Experimentele
proefopzet en statistische analyse van verdunningsreeksen.” Kwantitatieve Methoden 24, 149-160.
78. Tj. Imbos, C.P.M. van der Vleuten, R.J.M.M. Does & C.T. Geerligs (1986),
“Essay-writing: a useful instrument in educational measurement?” Onderzoek van Onderwijs 29, Rijksuniversiteit Limburg, Maastricht, 20 pp.
79. R.J.M.M. Does (1984), “Higher order asymptotics for simple linear rank statistics.”
In: Proceedings of the European Young Statisticians Meeting, H. Caeyers & P. Embrechts (eds.), KU Leuven, Leuven, pp. 40-44.
80. L. Strijbosch, J. Roos, R.J.M.M. Does & A. Volovics (1983), “EDA-programmatuur
op de Rijksuniversiteit Limburg.” In: Symposium Statistische Software, G.P. van der Vorst (ed.), Rijksuniversiteit Utrecht, Utrecht, 211-226.
81. J.G. Bethlehem, R.J.M.M. Does & R. Helmers (1978), “Statistische analyse van
verdelingen van golfhoogten en waterstanden bij de Oosterschelde.” Rapport SD 113/78, Mathematisch Centrum, Amsterdam, 51 pp.
82. J.G. Bethlehem, R.J.M.M. Does & R.D. Gill (1977), “Verdelingsvrije methoden bij
censuring.” Rapport SN 6/77, Mathematisch Centrum, Amsterdam, 84 pp.
Supervised PhD-
theses
1. M.D. Diko, Design of Control Charts for Statistical Process Monitoring (3 December 2019), University of Amsterdam.
2. R. Goedhart, Statistical Control of Shewhart Control Charts (17 October 2018), University of Amsterdam.
3. B.A. Lameijer, Implementing Lean Six Sigma in Organizations (17 October 2017), University of Amsterdam.
4. I.M. Zwetsloot, EWMA Control Charts in Statistical Process Monitoring (22 April 2016), University of Amsterdam.
5. H.Z. Nazir, Robust Control Charts in Statistical Process Control (11 September 2014), University of Amsterdam.
6. N. Abbas, Memory-type Control Charts in Statistical Process Control (6 September 2012), University of Amsterdam.
7. G.C. Niemeijer, Process Improvement in Healthcare (3 July 2012), University of Amsterdam
8. M. Schoonhoven, Estimation Methods for Statistical Process Control (16 November 2011), University of Amsterdam.
9. M. Riaz, Robust and Improved Monitoring in Statistical Process Control (11
November 2008), University of Amsterdam. 10. H. de Koning, The Scientific Grounding of Lean Six Sigma’s Methodology
(19 October 2007), University of Amsterdam. 11. J. van den Heuvel, The Effectiveness of ISO 9001 and Six Sigma in Healthcare
(26 January 2007), Erasmus University Rotterdam. 12. M.B. Vermaat, Statistical Process Control in Non-Standard Situations
(6 December 2006), University of Amsterdam. 13. W.N. van Wieringen, Statistical Models for the Precision of Categorical
Measurement Systems (2 December 2003), University of Amsterdam. 14. J. de Mast, Quality Improvement from the Viewpoint of Statistical Method
(10 April 2002), University of Amsterdam. 15. R.A. Ion, Nonparametric Statistical Process Control (12 December 2001),
University of Amsterdam.
16. W.A.J. Schippers, Structure and Applicability of Quality Tools (21 June 2000),
Eindhoven University of Technology. 17. A. Trip, Statistical Process Control in Practice: Let’s make it better (19 April
2000), University of Amsterdam. 18. A.F. Huele, Statistical Robust Design (5 November 1998), University of
Amsterdam. 19. C.B. Roes, Shewhart-type Charts in Statistical Process Control (27 November
1995), University of Amsterdam. 20. E.S. Tan, A Stochastic Growth Model for the Longitudinal Measurement of
Ability (16 December 1994), University of Amsterdam. 21. L.W.G. Strijbosch, Experimental Design and Statistical Evaluation of Limiting
Dilution Assays (21 April 1989), University of Maastricht. 22. Tj. Imbos, Het gebruik van einddoeltoetsen bij aanvang van de studie (17
February 1989), University of Maastricht.
Recommended