View
3
Download
0
Category
Preview:
Citation preview
Tissue CultureSpecial Section
Tissue Culture Contents Page
Consumables
Serological pipettes 1011-1012
Centrifuge tubes 1012
Roller bottles 1013
Cell culture flasks 1013
Erlenmeyer flasks 1013
Cell spreaders 1014
Dishes 1014
Multiple well plates 1014
Glass based dishes/plates 1015
Filtration
Units 1016-1019
Membranes 1020
Syringe filters 1020
Filling bells 1020
Roller Culture Apparatus 1021-1023
Stirrers 1024-1025
1010 Take a look at our latest products on www.ecomcat.co.uk
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
Tissue CultureConsumables
475-208
475-225
475-217
Serological PipettesA wide range of pipettes manufactured from crystal clear polystyrene. All pipettes up to 25ml areconstructed in a single piece, eliminating the problem of sample hang-up and so providing greateraccuracy (>98%). Each pipette has a colour coded plug for easy size identification. Graduations are fineand crisp, so easy to read with increased accuracy. The graduation also extends beyond the end of thescale to provide extra capacity when needed.
Pipettes are available sterile, either individually wrapped in fibre-free paper/plastic sleeves or in plastic packsof 25. They are gamma irradiated, non cytotoxic, non haemolytic & non pyrogenic. The standard pipettesare also available non-sterile, in bulk zip-lock bags. Available to purchase in pack or case quantities.
■ Standard narrow tip pipettes, suitable for general laboratory and tissue culture procedures■ Short pipettes, which are ideal for use in confined areas such as laminar flow cabinets ■ Wide tip pipettes, designed for handling viscous solutions ■ Open end pipettes, for the handling of very viscous solutions or suspensions ■ 1.1 and 2.2ml milk and bacteriological pipettes■ Aspiration pipettes, non plugged and non graduated pipettes for transferring solutions where no
accuracy is required and for vacuum aspirating procedures
Capacity Plug Qty per Pack Cat. No. Price Case Cat. No. Priceml colour sterile bag
Standard Narrow Tip Pipettes
1 Yellow 1 500 475-202 POA 2000 475-237 POA
1 Yellow 25 1000 475-203 POA 4000 475-238 POA
2 Green 1 500 475-204 POA 2000 475-239 POA
2 Green 25 1000 475-205 POA 4000 475-240 POA
5 Blue 1 250 475-206 POA 1000 475-241 POA
5 Blue 25 375 475-207 POA 1500 475-242 POA
10 Orange 1 200 475-208 POA 800 475-243 POA
10 Orange 25 250 475-209 POA 1000 475-244 POA
25 Red 1 100 475-210 POA 400 475-245 POA
25 Red 10 100 475-211 POA 400 475-246 POA
50 Purple 1 75 475-212 POA 300 475-247 POA
Short Pipettes
5 Blue 1 200 475-213 POA 800 475-248 POA
10 Orange 1 100 475-214 POA 400 475-249 POA
Wide Tip Pipettes
5 Blue 1 125 475-215 POA 500 475-250 POA
5 Blue 25 375 475-216 POA 1500 475-251 POA
10 Orange 1 125 475-217 POA 500 475-252 POA
10 Orange 25 250 475-218 POA 1000 475-253 POA
Open End Pipettes
1 Yellow 1 500 475-219 POA 2000 475-254 POA
1 Yellow 25 1000 475-220 POA 4000 475-255 POA
2 Green 1 500 475-221 POA 2000 475-256 POA
2 Green 25 1000 475-222 POA 4000 475-257 POA
5 Blue 1 125 475-223 POA 500 475-258 POA
5 Blue 25 375 475-224 POA 1500 475-259 POA
10 Orange 1 125 475-225 POA 500 475-260 POA
10 Orange 25 250 475-226 POA 1000 475-261 POA
Milk & Bacteriological Pipettes
1.1 Yellow 1 500 475-227 POA 2000 475-262 POA
1.1 Yellow 25 1000 475-228 POA 4000 475-263 POA
2.2 Green 1 250 475-229 POA 1000 475-264 POA
2.2 Green 25 1000 475-230 POA 4000 475-265 POA
Aspiration pipettes
2 No plug 1 500 475-231 POA 2000 475-266 POA
10 No plug 1 200 475-232 POA 800 475-267 POA
Non-Sterile Standard Pipettes
1 No plug 250 2000 475-233 POA 8000 475-268 POA
2 No plug 250 1000 475-234 POA 4000 475-269 POA
5 No plug 200 400 475-235 POA 1600 475-270 POA
10 No plug 125 250 475-236 POA 1000 475-271 POA
New
475-231New
475-202 to 475-209 New
475-232
Take a look at our latest products on www.ecomcat.co.uk 1011
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.ukConsumables
Tissue Culture
1012 Take a look at our latest products on www.ecomcat.co.uk
Corning, Serological PipettesA range of pipettes suitable for sterile tissue culture applications. Available in 2 styles of individualwrapping; paper/plastic wrap and all plastic wrap. The paper/plastic wrap is colour coded and allowseasy opening by either ‘pop-through’ or ‘peel-apart’ techniques. The all plastic ‘banana-peel’ wrapprovides easy, aseptic opening and full view of the pipette for easy size identification.
Cat. No. Capacity, Graduations Negative Colour Coded Pack Case Price/ml Grads. Stripe Quantity Case
Serological pipettes individually paper/plastic wrapped
673-215 1 0.01 0.2 Yellow 50 1000 POA
673-216 2 0.01 0.2 Green 50 1000 POA
673-217 5 0.1 2.5 Blue 50 200 POA
673-218 10 0.1 3.0 Orange 50 200 POA
673-219 25 0.2 10.0 Red 25 200 POA
673-220 50 0.5 10.0 Purple 25 100 POA
Serological pipettes individually all plastic wrapped
673-210 1 0.01 0.2 Yellow 100 1000 POA
673-213 10 0.1 3.0 Orange 50 200 POA
673-214 25 0.2 10.0 Red 50 200 POA
Corning, Plastic Centrifuge TubesCorning centrifuge tubes feature black printed graduations and a large white marking spot. They areavailable in 15ml and 50ml sizes and a choice of material, either polypropylene or polyethylene teraphtha-late. The 15ml tubes are conical and the 50ml tubes are available either conical bottom or self standing.
These tubes are available with your choice of cap style, the original plug seal or alternatively the flat toprim seal. Both of these provide a tight, secure seal.
All tubes are sterile and certified non-pyrogenic. They are available in racks or bulk packs.
Cat. No. Material Cap Style Max. RCF1, Sterile Pack Case Price/xg Type Quantity Case
15ml Centrifuge Tubes
673-240 PET2 Flat top 3600 Bulk packs of 25 500 POA
673-192 PET Flat top 3600 Racks of 50 500 POA
673-241 PP3 Flat top 8400 Bulk packs of 25 500 POA
673-193 PP Flat top 8400 Racks of 50 500 POA
673-195 PET Plug seal 3600 Bulk packs of 25 500 POA
673-242 PET Plug seal 3600 Racks of 50 500 POA
673-194 PP Plug seal 8400 Bulk packs of 25 500 POA
673-243 PP Plug seal 8400 Racks of 50 500 POA
Conical 50ml Centrifuge Tubes
673-244 PP3 Flat top 9400 Bulk packs of 25 500 POA
673-245 PP Flat top 9400 Racks of 25 500 POA
673-246 PP Plug seal 9400 Bulk packs of 25 500 POA
673-247 PP Plug seal 9400 Racks of 25 500 POA
673-248 PET2 Plug seal 3600 Racks of 25 500 POA
Self Standing 50ml Centrifuge Tubes
673-197 PP3 Flat top 3000 Bulk packs of 25 500 POA
673-196 PP Plug seal 3000 Bulk packs of 25 500 POA
1. RCF = Relative Centrifugal Force (xg) 2. PET = Polyethylene Teraphthalate 3. PP = Polypropylene
Corning, Centrifuge Tubes and Support CushionsThese tubes are ideal for applications requiring large-volume centrifugation. Each case of tubes containsa recyclable polyfoam rack to facilitate handling. Polycarbonate support cushions must be used with thisproduct unless the rotor has V-bottom holders. Tubes are sterile, certified non-pyrogenic.
Max. RelativeSize Cap Centrifugal Sterile Case Price/
Cat. No. Description ml Style Force Pack Size Quantity Case
673-198 Centrifuge tube, polypropylene 250 Plug 6000 6 102 POA
673-199 Support cushion, polycarbonate 250 n/a n/a n/a 6 POA
673-200 Centrifuge tube, polypropylene 500 Plug 6000 6 36 POA
673-201 Support cushion, polycarbonate 500 n/a n/a n/a 6 POA
673-198
673-199
673-192 673-247
673-197
673-210 to 673-220
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
Tissue CultureConsumables
Take a look at our latest products on www.ecomcat.co.uk 1013
Corning, Quick Seal and Plug Seal Roller BottlesCorning roller bottles are manufactured from virgin polystyrene and are treated for optimal cellattachment. Bottles feature superior optical clarity and a seamless one-piece durable construction thatreduces damage caused by transit and accidental dropping. All bottles are certified non-pyrogenic andhave individually printed lot numbers to aid in product traceability. Quick Seal bottles have printedgraduations, every 50ml up to 200ml.
Surface Sterile Case Price/Cat. No. Area, cm2 Graduations Cap Style Pack Size Quantity Case
673-187 490 No Plug Seal 2 40 POA
673-189 1750 Yes Quick Seal 5 20 POA
Corning, Quick Seal CapsCorning Quick Seal caps are suitable for use with Quick Seal bottles.
Cat. No. Description Case Price/Quantity Case
673-191 Quick Seal caps 100 POA
Corning, Expanded Surface Roller BottlesThe ribbed design provides twice the growth surface with the same exterior dimensions. Two window areasprovide for microscopic viewing as well as pouring surfaces. Bottles are treated for optimal cell attachment,certified non-pyrogenic, and have individually printed lot numbers to aid in product traceability.
Cat. No. Surface Graduations Cap Style Sterile Case Price/Area, cm2 Pack Size Quantity case
673-190 1700 Yes Easy Grip 2 36 POA
Corning Cell Culture FlasksCorning flasks feature an anti-tip skirt for increased stability, printed lot number for ease in traceability, andare certified non-pyrogenic. Flasks are available with a choice of cap style to match your application.
Cat. No. Growth Flask Cap Sterile Case Price/Area, cm2 Description Style Pack Size Quantity Case
673-163 25 Canted Plug 20 500 POA
673-165 25 Canted Phenolic 20 500 POA
673-166 25 Canted Vented 20 200 POA
673-168 75 Canted Plug 5 100 POA
673-169 75 Canted Phenolic 5 100 POA
673-167 75 Canted Vented 5 100 POA
673-164 75 Straight Plug 5 100 POA
673-170 150 Canted Plug 5 50 POA
673-171 150 Canted Phenolic 5 50 POA
673-172 150 Canted Vented 5 50 POA
673-173 175 Angled Plug 5 50 POA
673-174 175 Angled Vented 5 50 POA
673-175 225 Angled Plug 5 25 POA
Corning, Sterile Erlenmeyer FlasksCorning sterile, disposable, plastic Erlenmeyer flasks are made from optically-clear polycarbonate witha wide, easy-access mouth. They are designed as culture flasks or storage vessels and are ideal for shakerculture applications. The polypropylene plug seal cap offers two positions, open for gas exchange orclosed for liquid-tight seal. The vented cap is supplied for use in open systems.
Cat. No. Capacity Graduations Neck, mm Cap Sterile Case Price/ml ml Styles Pack Size Quantity Case
673-204 125 25 26 Plug 1 50 POA
673-205 250 25 31 Plug 1 50 POA
673-206 500 50 43 Plug 1 25 POA
673-207 125 25 26 Vented 1 50 POA
673-208 250 25 31 Vented 1 50 POA
673-209 500 50 43 Vented 1 25 POA
673-205
673-206
673-204
673-163 to 673-175
673-190
673-189
673-187
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.ukConsumables
Tissue Culture
1014 Take a look at our latest products on www.ecomcat.co.uk
679-061
679-060
679-059
Cell Spreaders, Stainless SteelStainless steel cell spreaders with smooth triangular, upturned ends that will not cut into agar. They areflame and autoclave sterilisable. The smaller 16mm bar cell spreader is ideal for 60mm plates and thelarger 25mm bar version is for 90mm plates. Both spreaders have a handle length of 203mm.
Cat. No. Description Bar width, mm Pack Price
679-060 Small cell spreader 16 1 POA
679-061 Large cell spreader 25 1 POA
Disposable Cell Spreaders, PolypropyleneEconomical polypropylene L-shaped cell spreaders, ideal for microbiological applications. Their smoothsurface enables quick spreading without tearing agar plates or disturbing media layers. They are suppliedsterile in bags of 10 for immediate use without flaming.
Cat. No. Description Pack Price
679-059 Disposable cell spreaders 500 POA
Corning, Cell Culture DishesManufactured from optically-clear virgin polystyrene. Available untreated or treated for optimal cell-attachment. Treated dishes are sterilised by gamma radiation and certified non-pyrogenic. All disheshave stacking beads to aid in handling and are supplied with vents to provide consistent gas exchange.
Cell Culture Dishes Non-treated Culture DishesSize Growth Sterile Case Cat. No. Price/ Cat. No. Price/(dia.xd), mm Area, cm2 Pack Size Quantity Case Case
35x10 8 20 500 673-176 POA 673-182 POA
60x15 21 20 500 673-177 POA 673-183 POA
60x15 21 gridded 20 500 673-178 POA ———— ————
100x20 55 20 500 673-179 POA 673-184 POA
100x20 55 10 480 673-180* POA ———— ————
150x25 148 5 60 673-181 POA 673-185 POA
245x245 500 4 16 ———— ———— 673-186 POA
* Denotes 6-pack carrier
Costar, Cell Culture ClustersCostar multiple well plates are treated for optimal cell attachment, sterilised by gamma radiation, and arecertified non-pyrogenic. All plates have a universal footprint and a raised bead to aid in stacking.Alphanumeric markings provide well identification.
Number of Well Growth Sterile Case Price/Cat. No. Wells Dia, mm Area, cm2 Pack Size Quantity case
673-222 6 34.8 9.5 5 100 POA
673-223 6 34.8 9.5 1 50 POA
673-224 12 22.1 3.8 5 100 POA
673-225 12 22.1 3.8 1 50 POA
673-221 24 15.6 1.9 1 100 POA
673-226 48 10.2 0.8 1 100 POA
Costar, 96 Well Cell Culture ClustersCostar 96 well plates are treated for optimal cell attachment, sterilised by gamma radiation, and arecertified non-pyrogenic. All plates have a universal footprint and a raised bead to aid in stacking.Alphanumeric markings provide well identification.
Well Growth Sterile Case Price/Cat. No. Configuration Dia, mm Area, cm2 Pack Size Quantity Case
673-227 Flat1 6.4 0.32 1 50 POA
673-228 Flat1 6.4 0.32 1 50 POA
673-229 Flat2 6.4 0.32 1 100 POA
673-230 Flat3 6.4 0.32 1 50 POA
673-231 Round4 6.4 n/a 1 50 POA
673-232 Round 6.4 n/a 1 50 POA
673-233 V-bottom 6.4 0.38 1 50 POA
673-234 Half Area 4.5 0.16 1 50 POA
673-235 Lid only n/a n/a 1 100 POA
1. Provided with special low evaporation lids 3. 8-well strip, packaged 12 strips per plate2. Provided without lid 4. Polypropylene with polystyrene lid
673-177
673-179
673-178
673-181 673-176
673-222
673-226
673-225673-232
673-227
New
New
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
Tissue CultureConsumables
Take a look at our latest products on www.ecomcat.co.uk 1015
673-274 to 673-277Iwaki, Glass Based DishesThese sterile dishes combine a culture environment with the optical surface required for high definitionmicroscopy. They comprise a glass or quartz coverslip attached to the base of a 35mm polystyrene dishwith non-toxic silicone adhesive. Available with a choice of either 12 or 27mm base diameter, they areideal for observing live or dead cells using a confocal or light microscope. With the benefit of excellenttransmittance and low fluorescence, they allow sensitive fluorescence measurements to be made at highmagnification. Being glass-bottomed they are also ideal for use with differential interference contrast(DIC) techniques in light microscopy. Supplied sterile, individually wrapped.
Cat. No. Description Base Material Coverslip Diameter, mm Pack Price
673-274 Glass based dish Glass 27 20 POA
673-275 Glass based dish Glass 12 20 POA
673-276 Glass based dish Quartz 27 50 POA
673-277 Glass based dish Quartz 12 50 POA
Iwaki, Glass Based Culture PlatesGlass based culture plates are specifically designed for the fluorescent measurement of live and deadcells at a higher magnification than that achievable through plastic dishes. With a base thickness 0.175+/- 0.02mm they have superior optical clarity over conventional polystyrene alternatives, making themideal for high transmittance microscope scanning. The chimney well design of the black plates reducescell to cell contamination and ‘cross talk’. They have a low fluorescent background and are especiallysuitable for use in sensitive fluorescence and confocal microscopy.
■ Standard multiwell plate format■ Supplied sterile, individually packed with own lid
Cat. No. Description No. of Wells Well Bottom Growth Area, cm2 Pack Price
673-278 Glass based culture plate 6 Flat 1.90 10 POA
673-279 Glass based culture plate 24 Flat 0.76 10 POA
673-280 Glass based culture plate 96 Flat 0.33 10 POA
Iwaki, Glass Based Assay PlatesGlass based culture plates are specifically designed for the fluorescent measurement of live and deadcells at a higher magnification than that achievable through plastic dishes. With a base thickness 0.175+/- 0.02mm they have superior optical clarity over conventional polystyrene alternatives, making themideal for high transmittance microscope scanning. The low base design ensures readability of all wells byinverted microscopes. The chimney well design of the black plates reduces cell to cell contamination and‘cross talk’. They have a low fluorescent background and are especially suitable for use in sensitive flu-orescence and confocal microscopy.
■ Imaging plane from bottom of plate less than or equal to 0.5mm■ Flatness across focal plane less than or equal to 100µm■ Standard multiwell plate format■ Supplied non sterile in inner packs of 5
Ideal for applications such as receptor ligand detection through fluorescent probes, cell based assay andlow end sensitivity detections.
Cat. No. Description No. of Well Well cap. Growth Pack PriceWells Bottom µl Area, cm2
673-281 Glass based assay plate 96 Flat 300 0.32 10 POA
673-282 Glass based assay plate 384 Flat 120 0.10 10 POA
New
673-279
673-278
New
673-281
673-282
New
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.ukFiltration
Tissue Culture
1016 Take a look at our latest products on www.ecomcat.co.uk
Nalgene, MF75™ Series of Filter Units and Bottle Top FiltersThe MF75™ series of filter units (except 115ml) are designed with an easy to use shape, with taperedsides and ‘grip dimples’ for secure handling and a wide base for stability. The lot number, membranetype, pore size and expiration date are printed on filter units, bottle tops and receivers for easy identifi-cation and lot traceability. The housing is manufactured from polystyrene, with a choice of membranetypes and pore sizes. The 115ml filter units have low profile polystyrene housing and a wide base,providing the ideal unit for small volume benchtop filtration.
The units have colour coded filter collars for instant identification of the membrane type. Every lot iscertified sterile, non-pyrogenic and non-cytotoxic. Sterile shelf life is 5 years.
Nalgene, MF75™ Series CN Membrane Filter Units Cellulose nitrate (CN) is the standard membrane for general filtering of buffers and solutions. Colourcoded green.
The filter units have graduations on both uppers and receivers and the sidearm has a cellulosic vent plugand quick-disconnect tubing adaptor. Supplied with a leak-proof, threaded closure for the receiver.
Cat. No. Upper Receiver Pore Membrane Membrane Grid Pack PriceCapacity Capacity Size Diameter Colourml ml µm mm
673-289 1 115 115 0.2 50 White None 12 POA
673-290 1 115 115 0.45 50 White Green 12 POA
673-104 2 115 115 0.2 50 White None 12 POA
673-291 2 115 115 0.45 50 White Green 12 POA
673-292 2 115 115 0.8 50 White Black 12 POA
673-107 150 150 0.2 50 White None 12 POA
673-108 150 150 0.45 50 White Green 12 POA
673-293 150 150 0.8 50 White Black 12 POA
673-110 250 250 0.2 50 White None 12 POA
673-111 250 250 0.45 50 White Green 12 POA
673-294 250 250 0.8 50 White Black 12 POA
673-113 3 500 500 0.2 75 White None 12 POA
673-114 3 500 500 0.45 75 White Green 12 POA
673-115 3 500 500 0.8 75 White Black 12 POA
673-116 3 1000 1000 0.2 75 White None 12 POA
673-117 3 1000 1000 0.45 75 White Green 12 POA
673-118 3 1000 1000 0.8 75 White Black 12 POA
1. Low profile units2 Normal profile sterilisation filter units 3. Each pack includes 12 glass-fibre prefilters
Nalgene, MF75™ Series Nylon Membrane Filter Units Nylon membranes are used for special applications. They have no wetting agents, the lowest levels ofextractables and provide excellent alcohol resistance. Colour coded red.
The filter units have graduations on both uppers and receivers and the sidearm has a cellulosic vent plugand quick-disconnect tubing adaptor. Supplied with a leak-proof, threaded closure for the receiver.
Cat. No. Upper Receiver Pore Membrane Pack PriceCapacity Capacity Size Diameterml ml µm mm
673-078 150 150 0.2 50 12 POA
673-079 150 150 0.45 50 12 POA
673-080 250 250 0.2 50 12 POA
673-081 250 250 0.45 50 12 POA
673-082 3 500 500 0.2 75 12 POA
673-083 3 500 500 0.45 75 12 POA
673-295 4 500 500 0.2 90 12 POA
673-084 3 500 1000 0.2 75 12 POA
673-085 3 500 1000 0.45 75 12 POA
673-296 4 1000 1000 0.2 90 12 POA
3. Each case includes 12 glass-fibre prefilters 4. Media-Plus filter units
New 673-289 673-104New
673-078
673-084
673-082
673-080
New 673-110New 673-107
New 673-116New 673-113
673-296
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
Tissue CultureFiltration
Take a look at our latest products on www.ecomcat.co.uk 1017
Nalgene, MF75™ Series SFCA Membrane Filter Units and BottleTop FiltersSurfactant-free cellulose acetate (SFCA) is much cleaner than standard cellulose acetate. It is low proteinbinding with no wetting agents and excellent flow rates. It minimises clogging and prevents loss ofspecific proteins. Colour coded yellow.
The filter units have graduations on both uppers and receivers and the sidearm has a cellulosic vent plugand quick-disconnect tubing adaptor. Supplied with a leak-proof, threaded closure for the receiver. 673-285 and 673-286 are designed for the filtration of large volumes (over 200ml) of whole serum. The largemembrane surface provides excellent flow rates when filtering up to 500ml of whole fetal bovine serumor a lesser volume of other sera. 673-086 and 673-087 media-plus filter units allow easy vacuumfiltration of up to 1L of media with 20% serum.
The graduated bottle top filters are designed for direct filtration into sterile glass media bottles, screwingsecurely onto media bottles with 33 or 45mm necks. Only sterile bottles designed for use with vacuumshould be used. They have side-arms with quick-disconnect tubing adaptors.
SFCA Membrane Filter Units
Cat. No. Upper Receiver Pore Membrane Pack PriceCapacity, ml Capacity, ml Size, µm Diameter, mm
673-066 115 115 0.2 50 12 POA
673-067 115 115 0.45 50 12 POA
673-068 150 150 0.2 50 12 POA
673-069 150 150 0.45 50 12 POA
673-070 250 250 0.2 50 12 POA
673-071 250 250 0.45 50 12 POA
673-072 1 500 500 0.2 75 12 POA
673-073 1 500 500 0.45 75 12 POA
673-285 500 500 0.2 90 12 POA
673-286 500 500 0.45 90 12 POA
673-074 1 500 1000 0.2 75 12 POA
673-075 1 500 1000 0.45 75 12 POA
673-086 1000 1000 0.2 90 12 POA
673-087 1000 1000 0.45 90 12 POA
1. Each pack includes 12 glass-fibre prefilters
SFCA Membrane Bottle Top Filters
Cat. No. Filter Fits Bottle Pore Membrane Pack PriceCapacity, ml Neck Size, mm Size, µm Diameter, mm
673-049 150 33 0.2 50 12 POA
673-050 150 33 0.45 50 12 POA
673-051 150 45 0.2 50 12 POA
673-052 150 45 0.45 50 12 POA
673-053 500 33 0.2 75 12 POA
673-054 500 33 0.45 75 12 POA
673-055 500 45 0.2 75 12 POA
673-056 500 45 0.45 75 12 POA
673-287 1000 33 0.2 90 12 POA
673-288 1000 45 0.2 90 12 POA
673-066
673-072
673-074
673-049 673-052
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.ukFiltration
Tissue Culture
1018 Take a look at our latest products on www.ecomcat.co.uk
Nalgene, MF75™ Series PES Membrane Filter Units and BottleTop FiltersPolyethersulfone (PES) is the ultimate cell and tissue culture media membrane, with low protein binding,low extractables, no external wetting agents and a fast flow. These are ideal for biological and pharma-ceutical sterilisation requirements. The 0.2µm filters are fitted with the new Supor® machV membranes.These are super clean membranes that provide even faster throughput and very low protein binding.Colour coded blue.
The filter units have graduations on both uppers and receivers and the sidearm has a cellulosic vent plugand quick-disconnect tubing adaptor. Supplied with a leak-proof, threaded closure for the receiver.
The graduated bottle top filters are designed for direct filtration into sterile glass media bottles, screwingsecurely onto media bottles with 33 or 45mm necks. Only sterile bottles designed for use with vacuumshould be used. They have side-arms with quick-disconnect tubing adaptors.
PES Membrane Filter Units
Cat. No. Upper Receiver Pore Membrane Pack PriceCapacity, ml Capacity, ml Size, µm Diameter, mm
673-157 115 115 0.2* 50 12 POA
673-158 115 115 0.45 50 12 POA
673-143 150 150 0.2* 50 12 POA
673-144 150 150 0.45 50 12 POA
673-145 250 250 0.2* 50 12 POA
673-146 250 250 0.45 50 12 POA
673-147 500 500 0.2* 75 12 POA
673-148 500 500 0.45 75 12 POA
673-149 500 500 0.2* 90 12 POA
673-150 500 500 0.45 90 12 POA
673-151 1000 1000 0.2* 90 12 POA
673-152 1000 1000 0.45 90 12 POA
PES Membrane Bottle Top Filters
Cat. No. Filter Fits Bottle Pore Membrane Pack PriceCapacity, ml Neck Size, mm Size, µm Diameter, mm
673-159 150 33 0.2* 50 12 POA
673-160 150 33 0.45 50 12 POA
673-161 150 45 0.2* 50 12 POA
673-162 150 45 0.45 50 12 POA
673-153 500 33 0.2* 75 12 POA
673-154 500 33 0.45 75 12 POA
673-155 500 45 0.2* 75 12 POA
673-156 500 45 0.45 75 12 POA
673-283 1000 33 0.2* 90 12 POA
673-284 1000 45 0.2* 90 12 POA
* Fitted with the new, faster, Supor® machV membrane
Nalgene, Filter Unit ReceiversFor use with the MF75™ series of filter units with an easy to use design. They are radiation sterilised andcan be used to store sterilised filtrate. They are also handy as presterilised, single use storage containers.1-1/2 turn threaded screw closure guarantees a leakproof seal and eliminates pH shift in receivers.Graduated.
Cat. No. Description Capacity, ml Pack Price
673-098 Filter unit receiver 150 24 POA
673-099 Filter unit receiver 250 24 POA
673-100 Filter unit receiver 500 12 POA
673-297 Filter unit receiver 1000 12 POA
673-157
673-145
673-154
673-098
New 673-297
673-100
673-099
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
Tissue CultureFiltration
Take a look at our latest products on www.ecomcat.co.uk 1019
Nalgene, Analytical Filter UnitsPrecise, easy to use systems for the recovery and growth of micro-organisms in research and industry. Thedisposable, preassembled, presterilised filter units have polypropylene uppers and polystyrene lowers.They have triton-free CN (cellulose nitrate) membranes, which provide superior recovery and growth ofmicroorganisms. Uppers and lowers twist apart for easy removal of the membrane for culturing. Thewide base is stable on the bench and the non-silicone gasket minimises the risk of contamination. Theyare excellent for microbial analysis, sterility testing, water quality or environmental testing.
Cat. No. Upper Receiver Pore Membrane Membrane Grid Pack PriceCapacity Capacity Size Diameter Colourml ml µm mm
673-259 150 150 0.2 47 White None 12 POA
673-260 150 150 0.45 47 White Grey 12 POA
Nalgene, Analytical Test Filter FunnelsDisposable, sterile filter funnels for microbiological analysis testing, food/beverages, raw material, sterilitytesting and finished product quality. The polypropylene funnels with high-impact polystyrene collars aresupplied preassembled and presterilised. The triton-free CN (cellulose nitrate) membranes providesuperior recovery and growth of micro-organisms and are easily removed for analysis. 673-265 has agrey, water quality CN membrane with a white grid. The membrane turns black when wet, making iteasier to detect and count growing colonies. Six funnel adaptors are included in each pack.
Cat. No. Capacity Pore Membrane Membrane Grid Pack Priceml Size, µm Diameter, mm Colour
673-261 100 0.2 47 White None 50 POA
673-262 100 0.45 47 White Grey 50 POA
673-263 250 0.2 47 White None 50 POA
673-264 250 0.45 47 White Grey 50 POA
673-265 100 0.45 47 Grey White 50 POA
Nalgene, Reusable FilterwareThe unique Nalgene filter holder family is a versatile system with interchangeable components in threeuseful volumes and various configurations. For use with 47/50mm membranes. Permits sterilisation oranalytical filtration, using vacuum or pressure. Major holder components are moulded of durable, highlybreak-resistant, transparent polysulfone (PSF), which is non-toxic, exhibits low protein binding character-istics, contains very low levels of trace metals or organic leachables and has fairly good chemical resistance.
Filter Holder with Receiver Eliminates the need for a manifold and/or breakable glass vacuum flask, so is suitable for field work.Supplied with a sterilisation membrane support plate for optimal flow rate and throughput and ananalytical plate for optimal membrane support and to keep the membrane flat. The receiver is graduated.The two side-arms allow connection to a vacuum line; also accepts syringe filters. The tubing adaptor canbe plugged with cotton for sterile venting. Accepts 6 to 8mm ID vacuum tubing. A cover allowsconvenient storage of sterile filtrate. Autoclavable.
Cat. No. Chamber Receiver Nominal Filter Nominal Filter Pack PriceCapacity, ml Capacity, ml Area 1*, cm2 Area 2**, cm2
673-125 250 250 11.25 13.3 1 POA
673-126 500 500 11.25 13.3 1 POA
673-127 500 1000 11.25 13.3 1 POA
* Filter area 1 with analytical support plate. ** Filter area 2 with sterilisation support plate
Bottle Top Filters This polysulfone filter holder with silicone O-ring and polypropylene vacuum adapter offers theconvenience of a bottle top filter with the cost savings of a reusable filter housing. Fits glass media bottleswith 33 or 45mm necks. The removable sterilisation membrane support plate provides maximum flowrate and throughput. There is a vacuum port on the lower section. The tubing adaptor can be pluggedwith cotton for sterile venting. Accepts 6 to 8mm ID vacuum tubing. Non-cytotoxic and autoclavable.
Cat. No. Chamber Capacity, ml Neck Diameter, mm Nominal Filter Area, cm2 Pack Price
673-045 250 33 13.3 1 POA
673-046 250 45 13.3 1 POA
673-047 500 33 13.3 1 POA
673-048 500 45 13.3 1 POA
673-259 New
673-047
673-045
673-261 to 673-264 New
673-127
673-126
673-125
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.ukFiltration
Tissue Culture
1020 Take a look at our latest products on www.ecomcat.co.uk
Nalgene, Water Quality MembraneThis cellulose nitrate (CN) membrane is certified to meet the requirements of standard methods for waterquality work. It contains no extractables that will inhibit or stimulate the growth of bacteria and has nosignificant effect on the pH of the medium. The sterilisation technique causes no toxicity, chemical orphysical changes. The membranes are individually wrapped, sterile and autoclavable. Suitable for usewith Nalgene reusable filterware (see page 1019).
SpecificationMin. bubble point, psig 40Min. flow rate, water, ml/min/cm2 measured at 14.7psig 51Max. temp, °C 130
Cat. No. Membrane Diameter, mm Pore Size, µm Membrane Colour Grid Pack Price
673-135 47 0.45 White Green 100 POA
Nalgene, Syringe FiltersSFCA Membrane Syringe Filters Suitable for cold sterilisation of aqueous solutions, biological or immunological samples and cell culturemedia components. Surfactant free cellulose acetate (SFCA) is low protein binding with low extracta-bles and contains no wetting agents. The housing material is modified acrylic. The inlet is female Luer-Lok and the outlet male Luer-Lok. The sterile version is certified sterile, non-cytotoxic and non-pyrogenicand is supplied in individual blister packs. The non sterile version is bulk packed. Do not autoclave.
PES Membrane Syringe Filter The universal tissue culture membrane. This offers higher flow rates, lower protein binding and lowerextractables than competitive cellulosic membranes. Inherently hydrophilic; contains no wetting agents.Suitable for the sterilisation of microbial media, proteinaceous solutions and tissue culture reagents. Thehousing material is modified acrylic. The inlet is female Luer-Lok and the outlet male Luer slip. Certifiedsterile, non-cytotoxic and non-pyrogenic and supplied in individual blister packs. Do not autoclave.
Nylon Membrane Syringe Filters For universal filtration of HPLC and GC solvents and DMSO. Chemically resistant to a wide range of solvents,low levels of extractables and inherently hydrophilic, containing no wetting agents or plasticisers.Polypropylene housing material. Female Luer-Lok inlet and male Luer slip outlet. Bulk packed. Autoclavable.
SpecificationsMembrane SFCA SFCA SFCA SFCA PES Nylon NylonSterile Yes Yes No No Yes No NoVolume, ml 10-50 10-50 10-50 10-50 2-10 10-50 10-50Pore size, µm 0.2 0.45 0.2 0.45 0.2 0.2 0.45Membrane diameter, mm 25 25 25 25 13 25 25Filter area, cm2 5.3 5.3 5.3 5.3 0.8 2.8 2.8Housing burst pressure, psig/bar 75/5.1 75/5.1 75/5.1 75/5.1 75/5.1 90/6.2 75/5.1Bubble point, psig/bar 45/3.1 28/1.9 45/3.1 28/1.9 35/2.4 42/2.8 25/1.7Hold up vol. after air purge, ml 0.25 0.25 0.25 0.25 20 0.15 0.15Nominal flow rate, ml/min 90 a 180 a 90 a 180 a 22 b 35 c 95 c
Pack 50 50 50 50 50 50 50
Cat. No. 673-267 673-268 673-269 673-270 673-266 673-271 673-272
Price POA POA POA POA POA POA POA
a. At 14.7 psig/1 bar with water b. At 45 psig/3.1 bar with water c. Water at 13.5 psig
Nalgene, Filling Bell, PolycarbonateA transparent, autoclavable filling bell for use in sterile work areas. Ideal for transferring sterile mediaaseptically from large containers to media bottles or culture vessels. Polycarbonate is durable, non-toxicand will not shatter, making an economical alternative to glass. It fits all common media bottles and issupplied with an autoclavable polypropylene tubing adaptor, which accepts 6.3, 9.5 and 12.7mm ID tubing.
SpecificationOverall height with adaptor, mm 114Bell ID, mm 70Inner fill tube length, mm 63Inner fill tube bottom OD, mm 9Inner fill tube bottom ID, mm 5
Cat. No. Description Pack Price
673-273 Filling bell 1 POA
673-135New
673-267New
673-266New
673-273New
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
Tissue CultureRoller Culture
Take a look at our latest products on www.ecomcat.co.uk 1021
908-089Wheaton, Roller Culture ApparatusConventional roller culture equipment designed to roll vessels 108 to 121mm in diameter and up to290mm long. Two outside rollers can be moved inward to accommodate bottles as small as 75mm indiameter. 2 vessels per deck. An extremely compact unit, well-suited for research work. Supplied withoutvessels. Use in an environment of CO2 may necessitate more frequent replacement of motor brushes.Maximum temperature for use is 40°C. CE marked.
SpecificationNumber of decks 1Electrical requirements 220–240V AC, 50/60Hz, 14wattsBottle speed 0.1 to 3.8rpm based on 110mm bottleDimensions, mm 320x325x180Weight, kg 8
Cat. No. Description Price
908-089 Bench top roller culture apparatus for 2 bottles POA
Wheaton, Deck Kit Attaches quickly and easily to above roller culture apparatus. Holds an additional 2 roller bottles per kit.The roller culture base unit (908-089) will accept two additional decks. Kit consists of assembled rollerdeck, four support posts, drive belt, necessary hardware and assembly instructions. Weight 2.3kg.
Cat. No. Description Price
908-091 Deck kit POA
Wheaton, Mini Bottle Roller Culture Apparatus The mini bottle roller culture apparatus is designed for small-scale mixing and agitation using bottlesthat are too small to be accommodated by the standard roller apparatus. It is perfect for 30ml or largerserum bottles, 100-125ml media bottles, or 38 x 200ml culture tubes.
The compact size makes it suitable for laboratories with limited space and for use with standardincubators and cold rooms. Continuous rotation of cylindrical bottles at predetermined optimum speedsprovides better distribution of media and uniform gassing.
The mini bottle roller culture apparatus will accommodate bottles 38 to 60mm in diameter, up to 240mmlong, with bottle speeds of 3 to 45rpm (38mm bottle) and 2 to 30rpm (60mm bottle). It is a single deckunit which has four rolling positions, each position will accomodate bottle/s up to 240mm long. Up totwo mini bottle deck kits can be added.
Supplied without vessels. Use in an environment of CO2 may necessitate more frequent replacement ofmotor brushes. Maximum temperature for use is 40° C. CE marked.
SpecificationNumber of decks 1Electrical requirements 230V AC, 50/60Hz, 14wattsBottle speed 38mm dia. bottle - 3 to 45rpm
60mm dia. bottle - 2 to 30rpmDimensions, mm 320x325x180Weight, kg 8
Cat. No. Description Price
908-224 Bench top roller culture apparatus for mini bottles POA
Wheaton, Deck Kit Attaches quickly and easily to above roller culture apparatus. Holds an additional 4 roller bottles per kit.The roller culture base unit (908-224) will accept two additional decks. Kit consists of assembled rollerdeck, four support posts, drive belt, necessary hardware and assembly instructions. Weight 4.1kg.
Cat. No. Description Price
908-225 Deck kit POA
New
908-224 New
908-224 shown with two deck kits (908-225)
New
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.ukRoller Culture
Tissue Culture
1022 Take a look at our latest products on www.ecomcat.co.uk
Wheaton, Modular Cell Production ApparatusThe Wheaton modular cell production apparatus allows large scale propagation of monolayer cellcultures in standard roller culture vessels, 108 to 121mm in diameter and up to 550mm long.
A powerful motor drives the bottles through a series of durable non-slip belts to exacting speeds from0.125 to 6.9 rpm (110mm bottles) with an accuracy of ±1%.
The base unit consists of the control housing, controls and motor. Additional 5-position decks can be mountedon the base to accommodate increased numbers of roller vessels. As a guideline, a base unit with 9 decks(max) will hold enough glass or plastic bottles to give a total surface area of up to 75000 cm2 for cell growth.
The front wheels are equipped with locking devices to ensure stability. The unit may be ordered completelyassembled or with base unit and decks separate for customer assembly. Supplied without bottles.
Dimensions of unit with roller deck is 760x620x350mm. Each additional deck increases height of unit by180mm. Electrics: 220/240V AC, 60 Hz, 35W.
The all-position drive model is a positive traction drive system for lightweight plastic bottles, where eachroller is individually driven. The all-position drive option may be field retrofitted (please enquire) or factoryinstalled (see below). A locking speed control knob which prevents accidental change in rotation ratesis included.
Cat. No. Description Price
908-095 Base unit with one 5-position deck 1 POA
908-094 Additional deck (maximum 8) POA
908-097 Base unit with one 5-position deck and all-position drive 2 POA
908-096 Additional deck with all position drive (maximum 8) POA
1. Modular roller apparatus holds a maximum number of 9 decks. Not suitable for use with plastic bottles.2. Modular roller apparatus holds a maximum number of 9 decks. Suitable for glass and plastic bottles.
Optional rotation alarm and battery backup systems are available, please contact our Technical Office on 01342 826836 for details.
Wheaton, R2P™ Roller Culture Apparatus This versatile design allows for growth and requirement changes without having to revalidate newequipment.
SpecificationBottle speed 0.25 to 8.75rpm (based on 110mm diameter bottles)*Accuracy, rpm ±0.01Electrical requirements 220–240VAC, 50/60Hz, 35WWeight, kg Drive unit with one deck is 24kg, each additional deck is 7–11kgDimensions (wxdxh), mm Drive unit with one deck 787x622x343 (for each additional deck add 152mm)
* Other speed ranges are available, please enquire for details.
Cat. No. Description Price
908-199 R2P roller culture apparatus with 1 deck POA
908-200 R2P roller culture apparatus with 3 decks POA
908-201 R2P roller culture apparatus with 11 decks POA
908-202 R2P additional deck kit (factory fitted)* POA
908-203 R2P additional deck kit (retro fittable) POA
Accessories
908-204 R2P temperature monitoring option (factory fitted)* POA
908-205 R2P temperature monitoring option (retro fittable) POA
908-206 R2P battery back-up unit (factory fitted)* POA
908-207 R2P battery back-up unit (retro fittable) POA
* Please note that this option must be specified at time of ordering.Optional computer software is also available, please enquire on 01342 826836 for details.
■ Modular design ■ From 5 to 55 positions per unit (holds 10 to
110, 850cm2 bottles) ■ Displays accurate RPM by entering vessel
diameter ■ Wide speed range, brushless, DC motor,
0.25 to 8.75rpm ■ Visual, audible, built-in rotation alarm ■ Programmable rotation direction, fixed or
reversing
■ Programmable soft start and stop ■ 10 program storage registers ■ All-position drive system ■ Optional temperature monitoring, 1 to 4
sensors per unit ■ Optional battery back-up, complete
functionality for up to 18 hours ■ Accepts glass or plastic bottles 108 to
121mm in diameter and up to 500mm long
908-095 with 8 additional decks
908-201
908-201 shown inside908-223 CO2 Roll-in Incubator
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
Tissue CultureRoller Culture
Take a look at our latest products on www.ecomcat.co.uk 1023
Wheaton, Roll-In Incubators for Cell ProductionRoller ApparatusRoll-In Incubator The Wheaton Roll-In incubator is a convenient, space-saving and economicalalternative to a warm room for small production runs involving only one rollerapparatus. Designed to accommodate a full size Modular or R2P Roller Apparatus witha base unit and nine roller decks. The unit provides over 38 cubic feet of space.■ Forced air circulation with digital temperature control provides temperature
uniformity to ±0.5°C (without shelves). Temperature range is ambient +5°C to70°C (empty chamber)
■ Independent over-temperature safety protection■ Viewing window in door■ Four internal electrical outlets for accessories
The incubator can accommodate up to six shelves for other types of equipment suchas magnetic stirrers and rocker tables which can be plugged inside the unit. TheWheaton Roll-In Incubator has double-walled construction designed for temperaturestability and easy cleaning.
SpecificationsHeating method Forced air circulation with digital temperature controlTemperature range, °C Ambient +5 to 70*Temperature uniformity, °C ±0.5*Interior dimensions, mm 889x660x1930Exterior dimensions, mm 1041x851x2209Electrics 230V, 60Hz, 1500WWeight, kg 331
Cat. No. Description Pack Price
908-197 Roll-In Incubator with window 1 POA(shelves supplied separately)
908-198 Shelf for roll-in incubator 1 POA
For roller culture apparatus, please see page 1022. * In empty chamber
Wheaton, Roll-In CO2 IncubatorThe Wheaton CO2 incubator is a convenient, space-saving and economical alternative toa warm room for small production runs. Designed to hold full size units, it can be usedin combination with the optional shelves for spinner flasks, rocker tables, etc. The doublewalled construction provides for temperature stability and easy cleaning
■ Forced air circulation with digital temperature control provides temperature uniformity to ±0.5°C (without shelves). Temperature range is ambient +5°C to70°C (empty chamber)
■ CO2 range 0–20% ■ Over 38 cubic feet of space■ Fold down ramps for rolling in Roller Culture Apparatus■ Independent over-temperature safety protection■ Viewing window in door■ Four internal electrical outlets for accessories
SpecificationsHeating method Forced air circulation with digital temperature controlTemperature range, °C Ambient +5 to 70*Temperature uniformity, °C ±0.5*CO2 range 0 to 20%Interior dimensions, mm 889x660x1930Exterior dimensions, mm 1041x851x2209Electrics 230V, 60Hz, 1500WWeight, kg 315
Cat. No. Description Pack Price
908-223 CO2 Roll-In Incubator with window 1 POA(shelves supplied separately)
908-198 Shelf for CO2 incubator 1 POA
For roller culture apparatus, please see page 1022. * In empty chamber
908-197 shown with R2P roller culture apparatus (908-200) and optional shelves
908-223 shown with R2P roller culture apparatus (908-201)
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.ukStirrers
Tissue Culture
1024 Take a look at our latest products on www.ecomcat.co.uk
Techne, MCS Series of Biological Stirrers■ A range of five stirrers■ Seven culture vessels ranging from 125ml to 5000ml■ Calibrated speed control and interval stirring■ Unique stirring action
The Techne range of biological stirrers is suitable for suspension cell culture and for microcarriers.Uniform suspension of cell cultures and microcarrier beads is achieved by a gentle stirring action whichaids attachment and promotes circulation of the medium around the cells to encourage a high rate ofgrowth. Continuous stirring is adjustable up to 80rpm; the stirrers also incorporate fully variable intervalstirring, whereby ‘on’ times between 6 seconds and 5 minutes, and ‘off’ times between 2 minutes and2 hours can be selected.
Special SOFTSTART design ensures controlled acceleration of the stirrer rod to the selected speed, thusavoiding excessive turbulence within the medium on start-up and eliminating the risk of cell damage.
Each MCS biological stirrer comprises a polished stainless steel platform which houses the motor andcontrols; all models are suitable for incubator and/ or warm room use.
General Characteristics: All ModelsSpeed range, rpm 0 to 80Speed setting accuracy, rpm Better than 3SOFTSTART speed control 20 seconds acceleration/20 seconds decelerationInterval stirring – variable on-time 6 seconds to 5 minutes
– variable off-time 2 minutes to 2 hoursHeat input to culture vessel Negligible. Continuous running produces no
measurable increase in temperatureElectrical supply – all models 240/110V 50/60Hz
Techne, Glass Culture Vessels with Stirrer RodsTechne biological stirrers use special borosilicate glass culture vessels and stirrer rods, siliconised to reducethe possibility of cells attaching to and growing on the surfaces.
640-010 shown with culture vessels640-008
Range of Stirrers and Vessels
SpecificationsModel MCS-101L MCS-102L MCS-104S MCS-104L MCS-104XLVessels per system 1 2 4 4 4Maximum vessels size, ml 5000 (3000 min) 1000 500 1000 5000 (only)Width, mm 395 140 250 395 530Depth (including mains plug), mm 495 400 365 495 595Height (excluding vessel location pips), mm 90 90 90 90 90Net weight (excluding vessels), kg 6.5 3.0 4.1 6.1 11.5
Cat. No. 640-179 640-173 640-010 640-004 640-180
Price POA POA POA POA POA
SpecificationsNominal working volume 125ml 250ml 500ml 1L 3L 5L 5LGross volume, ml 250 500 1000 2000 6000 10 000 10 000Working volume range, ml 50–175 100–350 200–700 500–1500 1500–3500 2000–7000 2000–7000Height, mm 145 170 205 263 284 365 365 Diameter, mm 65 80 100 140 215 240 240 Top cap – thread size, mm 42 42 42 60 60 60 60 Side cap – thread size, mm 20 20 30 42 42 24 42 Port size, mm 14 14 23 33 33 18 33 Number of side necks 2 2 2 2 2 5 2
Cat. No. 640-007 640-008 640-009 355-037 640-181 640-182 640-183
Price POA POA POA POA POA POA POA
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
Tissue CultureStirrers
Take a look at our latest products on www.ecomcat.co.uk 1025
SpecificationsStir bar configuration Type A & B Type A Type BModel AS635 AS640 AS649 AS650 AS651 AS641 AS642 AS637No. of positions 1x2L 4x2L 1x5L 1x10L 1x24L 1x5L 1x10L 1x24LSpeed range, rpm 10–150 10–150 10–150 10–150 10–150 10–150 10–150 10–150Total stir capacity, L 2 8 5 10 24 5 10 24Maximum vessel diameter, mm 150 130 280 280 280 280 280 280Dimensions (lxw), mm 150x150 260x260 260x260 260x260 260x260 260x260 260x260 260x260
Cat. No. 640-253 640-255 640-258 640-259 640-260 640-256 640-257 640-254
Price POA POA POA POA POA POA POA POA
640-259
640-260
640-255640-253
640-220Cell Culture Bottles (autoclavable polycarbonate) with Pendulum (Type A) Stirrer
Cat. No. Description Capacity, L Price
640-263 Cell culture bottle with pendulum (Type A) 2.2 POA
640-262 Cell culture bottle with pendulum (Type A) 12.5 POA
640-261 Cell culture bottle with pendulum (Type A) 24 POA
Stirrer BarsPTFE coated stirrer bars for use with Type B stirrer platforms.
Cat. No. Description Size, mm Pack Price
640-274 PTFE coated stirrer bar 60x10 5 POA
640-275 PTFE coated stirrer bar 40x8 5 POA
Nalgene, 2605 Magnetic Culture VesselPolycarbonate; polypropylene closures; TEFLON TFE stirrer bars;polypropylene/TFE stirring assemblySpecially designed for efficient top-to-bottom mixing at low speed and low shear. This lightweight break-resistant 1 litre culture vessel is excellent for use on a magnetic stir plate for small-volume scale-up appli-cations. It is the only plastic vessel of its size specifically designed for use as a culture vessel. Two magneticstirrer bars are included: a small version for bacteria and a large version for mammalian cells. The impellerheight is adjustable. Graduations to 1 litre. Autoclavable.
SpecificationCapacity, total/working, litres 2.2/1Closure diameter, top/side, mm 63/38Overall height x overall diameter, mm 266x137Overall width, including ports, mm 190
Cat. No. Description Price
640-220 Magnetic culture vessel with stirrer bars POA
STEM Corporation, Ultra Slow Speed StirrersA range of precision ultra-slow speed stirrers specially designed forbiotechnology applications including cell culture stirring. Magneticdrivers with electronic control give a precise stirring action which isreproducible to better than one rpm, with minimal heat production. Thesplash proof, non-corrosive polymer case and 12V DC platform voltagemake these units ideal for operation within fume cupboards, heatedcabinets or incubators. Type A, ‘pendulum’, stirrers do not contact thebottom or sides of the vessel, preventing any grinding action. Largestirrer bars (eg. cat. no. 640-274) can be used with type B systems.
Type A stirrer platforms have a point source magnet for use with STEMpendulum type stirrers (use of other pendulum-type stirrers should beverified). Type B stirrer platform have a bar magnet for suspended-baror bar-type stirrer. AS635 and AS640 will accommodate both types dueto their size.
Recommended