View
217
Download
2
Category
Preview:
Citation preview
S1
S2
S3
S4
S5
S6
S7
Arrival of the trucks / Exhibits as per schedule
Issue of Temp. Badge (Entry Plaza) by the Security.
Hall Director’s issues stall possession (Form 4.1)
Exhibitors collects entry sticker of truck from
site handling officer
Paste entry sticker on truck
Truck arrives at gate, allowed entry after security check
Truck enters respective halls offloads Material /Exhibits
& gets out of BIEC as per route plan
EXHIBIT DOWNLOADBAY 1
S2
S4
S3
TRUCK ENTRY
TRUCK ENTRY
TRUCK ENTRY
TRUCK ENTRY
HALL DIRECTOR
H
TOWARDS TUMKUR
TOWARDS BANGALORE CITY
TRUCK ENTRY ONLY
TRUCK ENTRY ONLY
TRUCK EXIT ONLY
NO PARKING
ON ROADSNO PARKING
ON ROADS
NO PARKING
ON ROADS
NO ENTRY OF TRUCK BEYOND THIS POINT
S1
S5
S6
S3
S7
S7
S7
S7
S3
S3
BIEC MAIN GATE BIEC OUT GATE
Left Luggage
TOILET
FIRD AID ROOM
SecurityCabin
Important steps and procedure to be followed for smooth arrival, entry and installation of exhibits and vehical movement during ACREX INDIA 2012
Ä Exhibitor / Exhibitor Representative / Stall designer arrive at BIEC with exhibits/stall set up material and get guided by the security to park at the exhibitor truck parking area. Parking is prohibited either on the road or in front of BIEC gate.
Ä Exhibitor / Exhibitor Representative / Stall Decorator (E / ER / SD) who arrive at the Entry Plaza will be guided by the security personnel and temporary badge(s) will be issued. (Trucks / Exhibits beyond BIEC main gate will not be allowed. Even temporary parking in front of the gate is barred).
Ä Participants then proceed to designated Hall to meet the Hall Director and take possession of the allotted space by producing Stand Possession Form 4.1 of Exhibitor Manual, Approved layout plan and other relevant documents.
Ä Hall Director (HD) will issue “Stand Possession” on Form 4.1 after completing due formalities related to payment clearance, stall layout approval, TDS certificates (Challan declaration or F-16) and other official procedure. HD will then issue Exhibitor / Service Badges to the authorized personnel as per eligibility.
Ä E / ER / SD then to approach Site Handling office situated near entry Plaza for material movement as per the schedule given in advance.
Ä E / ER / SD then to paste movement schedule sticker onto the truck and wait for the turn. As per the schedule the trucks will be allowed inside the venue.
Ä Truck driver then to approach the particular Cargo gate (as mentioned in the sticker) and gain entry after being checked by the security. The concerned site handling agency will unload the exhibits at their respective stalls.
Ä Immediately after unloading, the truck should exit BIEC as per guidance of the security and to follow the truck movement plan.
Ä Empty trucks will not be allowed to park in the truck parking area and is advised to exit BIEC complex to make way for other waiting vehicles.
ACREX INDIA 2012
Plan.Doc 2
Recommended