How to build the inside of a pc

Hayden Dubock

Step 1

Install the main power supply unit into the correct working conditions .

Step 2

Screw in the power supply

Step 3 Place the RAM the correct way round in the mother

board and clip it in.

Step 4 Step 4 place the CPU in the casing

Step 5 Close casing

Step 6 Close the cpu casing and put the thermal-paste on top

of the casing

Step 7 Screw the heat sink into position above the cpu

Step 8 Plug in the heat sink next by one of the screws

Step 9 Put the mother board on in the tower/casing

Step 10 Clip the fan to the mother board

Step 11 Insert the wireless nic

Step 12 Insert the video adapter

Step 13 Insert the hard drive and screw it in

Step 14 Install the optical drive and screw it in

Step 15 Install the floppy drive and screw it in

Step 16 Plug in the pata cable

Step 17 Plug in the floppy cable

Step 18 Plug in the sata cable

Step 19 Close the casing and plug in the input components

Step 20 This is what it should look like and it is now finished