Upload
haydenrd1
View
75
Download
3
Embed Size (px)
Citation preview
Hayden Dubock
Step 1
Install the main power supply unit into the correct working conditions .
Step 2
Screw in the power supply
Step 3 Place the RAM the correct way round in the mother
board and clip it in.
Step 4 Step 4 place the CPU in the casing
Step 5 Close casing
Step 6 Close the cpu casing and put the thermal-paste on top
of the casing
Step 7 Screw the heat sink into position above the cpu
Step 8 Plug in the heat sink next by one of the screws
Step 9 Put the mother board on in the tower/casing
Step 10 Clip the fan to the mother board
Step 11 Insert the wireless nic
Step 12 Insert the video adapter
Step 13 Insert the hard drive and screw it in
Step 14 Install the optical drive and screw it in
Step 15 Install the floppy drive and screw it in
Step 16 Plug in the pata cable
Step 17 Plug in the floppy cable
Step 18 Plug in the sata cable
Step 19 Close the casing and plug in the input components
Step 20 This is what it should look like and it is now finished