Electrodeposition of Nickel Nanoparticles on Polypyrroleleung.uwaterloo.ca/Group Meetings/2002...

Electrodeposition of Nickel Nanoparticles on

Polypyrrole

Kimberly DickSeptember 20, 2002

Kimberly Dick 2

Overview• Previous success with electrodeposition of cubic copper

nanocrystals• Goal: to achieve similar results with nickel – produce

nanocrystals of uniform size, shape, and distribution• FCC structure of nickel: aim to produce single-crystal

cubes• Motivation: catalytic properties of nickel – possible

application in catalysis science

Kimberly Dick 3

Cubic Copper Nanocrystals

Kimberly Dick 4

Method• Electrodeposition of ~ 100 nm polypyrrole

– Deposit at 0.8 V overpotential– Control thickness by controlling total charge transfer

• Electrodeposition of ~ 1 ML Ni• Solution of 0.01 M NiSO4, 0.01 M NaClO4 (adaptation of

copper deposition)• Deposit at constant potential

– Typically ~ -0.6 V for Cu– Perform cv scan to determine deposition potential for Ni

Kimberly Dick 5

Nickel Deposition from cvScan

Kimberly Dick 6

New method

• Use recipe obtained from literature (Lachenwiter & Magnussen, 2001)

• 0.01 M NiSO4, 0.01 M H3BO3, 0.0001 M H2SO4• Recipe originally used to deposit layer of nickel on bare

gold electrodes (by cv scan)

Kimberly Dick 7

cv Scan by New Method

Kimberly Dick 8

Ni on Au by cv Scan

Kimberly Dick 9

Ni on Ppy at –1.2 V

Kimberly Dick 10

Regular Ni Nanocrystals –1.4V

Kimberly Dick 11

Morphology of Ni Growth

Kimberly Dick 12

Clustering Nanoparticles

Kimberly Dick 13

Ni Nanowires – 1.3V

Kimberly Dick 14

Clustered Nanowires

Kimberly Dick 15

Rectangular Nanoparticles

Kimberly Dick 16

Sensitivity to Potential – 1.5V

Kimberly Dick 17

Effect of Polymer Morphology and Thickness

Kimberly Dick 18

Further Study

• Effect of potential – examine smaller increments (0.1 V difference)

• Effect of polymer – vary thickness to determine effect• Nickel/electrolyte concentrations• e-beam lithography – controlled deposition