DT Barrel Alignment Using Standalone Muon Tracks

DT Barrel Alignment Using Standalone Muon Tracks

Luca ScodellaroMuon Barrel Workshop

February 24th, 2011

2

Outline• Brief remind of the methods• MC analysis set up• Reconstructing barrel geometry: ◊ Sectors ◊ Sector connection ◊ Wheels ◊ Whole barrel• Final remarks

3

Brief Remind of the Method

4

Standalone Geometry with Tracks• Hardware alignment close to its design precision• Alignment with respect to the tracker might suffer

for several effects: ◊ Tracker misalign., B field, material description• Exploring a third source of information: SA tracks• Millipede approach based on a linear

approximation of residuals: R = B∆p + Aδ• B matrix hard to describe in a non-uniform

magnetic field

5

Standalone Geometry with Tracks• Trying an approach based on DT segments: ◊ Selecting tracks with pT>50 GeV/c ◊ For small movements, we can assume ∆p to depend only on chamber movements B ∆p = ACδinit = A’δfinal ◊ Simplified χ2 minimization

6

MC Analysis Set Up

7

Studies on MC• We want to understand the sensitivity we can

reach on ideal MC • MC sample: ◊ CosmicMC_BON_10GeV_22X_V6_MuAlStandalone• Using 1Leg tracks used to improve pT

measurements ◊ Same performances with 2Leg tracks and 2

iterations• The idea is to start from HW based alignment• A misalignment scenario has been generated by

smearing ideal positions (local frame) by: ◊ Center of the chamber: 400 μm ◊ Orientation: 400 μrad

8

Validation of the Fits• We reconstruct objects (sectors, wheel,

etc.) in a standalone way • When comparing two geometries for an

object, we look at the local coordinate of each chamber in a geometry in the reference system of the same chamber in the other geometry

• The global transformation which minimize these coordinates is computed

• Resulting local coordinates are presented

9

Reconstructing Sectors

10

Chamber to Chamber Fit• Residual distribution for YB0, Sector 10, Station

2Misaligned geometryCorrected geometry (1 iter.)

11

Chamber to Chamber Performance• Performance in chamber alignment vs. number

of segments used

12

Sector Recontruction Performance• Distance of chamber position from ideal

geometry

13

Sector Recontruction Performance• Performance in sector alignment vs number of

segments in the chamber with lowest statistics

14

Sector Connection

15

Sector Connection Strategies• All chamber to chamber approach (All

C2C): ◊ Treat all chamber separately ◊ Compute at the same time internal sector

structure and sector relative position ◊ Alignment matrix A is 20x36

• Sector to sector approach (S2S): ◊ Froze sector structure ◊ Fit relative sector position by using segments from crossing tracks ◊ Alignment matrix A is 20x6

16

Sector Connection Performance• Sector connection performance for All C2C and

S2S:

17

Sector Connection Performance• Sector connection performance with All C2C vs

number of segments in the chamber with highest statistics

18

Reconstructing Wheels

19

Wheel Reconstruction• WheelS2S: using S2S strategy and fitting all

sectors in a wheel together (A~172x258)

20

Wheel Reconstruction• Details on the performance in local Y for subsets of

sectors (all wheel was fitted)

Sectors Mean ΔY Mis. (μm)

RMS ΔY Mis. (μm)

Mean ΔY Algn. (μm)

RMS Δ Y Algn. (μm)

2 to 6 -12 286 6 1518 to 12 39 258 -18 1485 to 9 24 235 10 2556 t0 8 14 196 -11 22511 to 3 28 280 -21 25312 to 2 14 217 -1 177

21

Wheel Reconstruction• Sector connection comparison for S2S and

WheelS2S• WheelS2S connect the sectors as S2S (no

degradation)

22

Reconstructing Whole Barrel

23

Barrel Reconstruction• Wheel2Wheel: same strategy as for WheelS2S but

using frozen wheels instead of frozen sectors

24

Final Remarks• Studies of standalone barrel alignment with MC

cosmics basically complete• Testing on data ongoing: ◊ Cosmics first: low statistics for certain barrel region,

and ttrig not optimal ◊ Collisions data: better ttrig, better relative statistics

between sector/wheel, no as much muon with high pT, no 1leg tracks

◊ Could use different datasets for each alignment step

25

Backup Material

26

Sector Recontruction Performance• Sector reconstruction with 1 leg tracks and 2 leg

(2 iterations) tracks

27

Chamber to Chamber Performance• Performance in the alignment of chambers

between sectors

28

Distribution of Segments in Cosmics

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sectors

Whe

els

29

Sector Connection Performance• Sector connection performance for All C2C and

S2S strategies

30

Distribution of Segments in Cosmics

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sectors

Whe

els