View
7
Download
0
Category
Preview:
Citation preview
SU P P L I E S FOR TH E
S T E E L RU L E D I E I NDU S T RY
ONTARIO, CA • TACOMA, WA • DALLAS, TX • ELMHURST, IL
www.wagnerdiesupply.com
Wagner Die Supply ®
Diemaking & Diecutting Source and Resource
Since we opened our doors in 1947, Wagner has focused on providing customers with the best in
quality and service. That’s what our Valu-Edge philosophy is all about – we provide our customers
with more than just great supplies and equipment, we back up our products with the best in
service, technical support and training in the industry. After all, value is only maximized when
production is at it’s optimum, and that’s achieved when the correct products/tools are used for any
given operation. At Wagner, our technical staff won’t “sell you” on a particular product or
technique – we advise you, on the very best products and techniques for your specific application.
The results go hand in hand, more efficient production – optimizing yield – maximizing your profits.
It’s the Valu-Edge, and it’s only available from Wagner Die Supply - America’s leader in steel rule die
supplies for the diecutting industry. Get the Valu-Edge today!
ABOU T WAGNER D I E S U P P LY AND
OUR PH I L O SO PHY
WE ARE PROUD TO BE ASSOCIATED WITH THESE FINE INDUSTRY ASSOCIATIONS:
WAGNER DIE SUPPLYACCEPTS:
Download a printable PDF format credit card ap-proval form from our website at:http://www.wagnerdiesupply.com/creditcardappr.htmlOr call us at (800) 423-4478 and request that onebe sent to you by fax or mail.
CREDIT ACCOUNTS:Terms: Net 30 days.Minimum order: $50.00Returned checks will be charged $30.00To establish a credit account with Wagner DieSupply, download a credit application from ourwebsite at:http://www.wagnerdiesupply.com/creditapp.htmlOr call us at (800) 423-4478 and request that onebe sent to you by fax or mail.
OVERAGE POLICY:On custom-made products Wagner Die Supplyreserves the right to ship up to a 10% overage.Your Wagner Die Supply customer servicerepresentative can answer any questions youmight have regarding our overage policy.
© 2011 Wagner Die Supply
CON T EN T S
Section Pages Product Group
www.wagnerdiesupply.comO N T A R I O , C A • T A C O M A , W A • D A L L A S , T X • E L M H U R S T , I L
1-2 WAGNER PUNCHES
3-4 STEEL RULE
5-8 DIEROOM SUPPLIES
9 EJECTION MATERIALS
10
DIEROOM EQUIPMENT
11-12
CREASING MATRIX
15 HENDERSON STORAGE SYSTEMS
13-14
DIECUTTING & MAKEREADY
The sections featured in this Valu-Edge Catalog correspond to sections in www.wagnerdiesupply.com.
WAGNER PUNCH E S
1www.wagnerdiesupply.com
O N T A R I O , C A • T A C O M A , W A • D A L L A S , T X • E L M H U R S T , I L
A leader in punch manufacturing since 1947, Wagner Punches are stillthe only punches manufactured in the U.S.A. under stringentISO-9001:2000 standards. Wagner punches feature our industry-exclusive Enduro CBN™ heat treating process. Wagner makes awide variety of in-stock punches and has the capability to produce justabout any type of custom punch imaginable, using state-of-the-art CNCmachining. Wagner punches are also identity-etched for easyidentification and accurate reordering.For a complete listing of Wagner punches refer to the Wagner Catalogavailable on CD or on-line at www.wagnerdiesupply.com.
Seamless Tube Punches
Oval Tube Square Tube withand without Spring
Inside DiameterRelieved (cut-awayview shown)
007 Straight Cut -featuring minimumsupport bevel
Outside DiameterRelieved
Notched Tube Straight O.D. Rotary Serrated -Available in I.B. or C.B.
Inside-Inside BevelRotary Serrated
Standard Tube withEjectors
Standard Tube withSpring
Special Base
Cup Punches Cross Cuts Pin Points Washer Sets
WAGNER PUNCH E S
2www.wagnerdiesupply.com
O N T A R I O , C A • T A C O M A , W A • D A L L A S , T X • E L M H U R S T , I L
Seamless Hangers Feed Thru Feed Thru Ovals Serrated Feed Thru
Heavy WallFeed Thru
Clicker style FeedThru
Self-Cleaning -Standard, Knurled andKleen Cut™
Self-CleaningSerrated
Self-Cleaning withNo-Turn Pin
Self-CleaningSquares
Self-Cleaning Ovals Rule Connectors
Rolodex® Punchesfrom Steel Rule
Micrometer Adapter -for measuring rule andpunch heights up to 1”.
Custom-milled punches - designed and manufactured to customerspecifications (materials and applications).
Custom-milled Punches
S T E E L RU L E
3www.wagnerdiesupply.com
O N T A R I O , C A • T A C O M A , W A • D A L L A S , T X • E L M H U R S T , I L
Cutting Rule Profiles available in ground or shaved edge in several bevel angles.
Creasing Rule Profiles designed to make an impression in the die cut product for folding.
Perforating Rule available from 2 teeth per inch to 100 teeth per inch (TPI).
Wave Rule available in edge wave or full body wave, depending on wave required.
Tear Edge also known as zipper rule.
Rotary & Serrated Rule used in cylinder and flat bed cutting.
Center Bevel
Single Bevel
Long Center Bevel
Long Single Bevel
Known as: Typical uses:
Center Bevel, Standard Bevel, DoubleBevel, Center Face or A Bevel.
This is by far the most popular bevel forconventional paperboard cutting.Approximately 85% of all paperboard cut-ting is done with a Center Bevel rule.
Side Bevel, Single Bevel, Side Face,B Bevel or Flush Bevel
Single Bevel rule produces a squarefinish. It’s also used to produce tighter bends,compared to Center Bevel rule.
Long Center Bevel, Double Double Bevel,Center Face Double Bevel,Facet Bevel orAA Bevel
This rule is especially effective whencutting hard and/or thick materials.It helps reduce cutting pressure by deflectingpressure with the first bevel supported by thesecond bevel.
Standard length of Bevel: 2 pt. - 1/8” long3 pt. - 3/16” long, 4 pt. - 1/8” or 3/16” long
Standard length of Bevel: 2 pt. - 1/8” long3 pt. - 3/16” long, 4 pt. - 1/8” or 3/16” long
Long Side Bevel, Long Single Bevel,Side Face Double Bevel, Side Facet Bevelor BB Bevel.
Also used for cutting thicker and/orharder materials. The long Single Bevel designreduces the crush to the finish die cut productwhen the bevel faces away from the piece.
2 PT and 3 PTStandard Double
Round
2 PT body with a3 or 4 PT top
3 PT body with a4 , 6 or 8 PT top
4 PT body with a6 or 8 PT top
4, 6 and 8 PTSingle Round
2 PT body with a1 or 1.5 PT top
2 teeth per inch
6 teeth per inch
12 teeth per inch
3/32” tooth x 1/32” space
3/32” tooth x 3/32” space
3/16” tooth x 1/16” space
Corrugated edge wave Medium fine edge wave Medium angle full body wave
Patterns are not actual size, contact Wagner Die Supply for a full listing of exact sizes and styles.
Pattern is not actual size, contact Wagner Die Supply for a full listing of sizes and styles.
Rotary rule available in 8, 10, 12 and 13 serrated teeth per inch in curved and straight styles.
Serrated rule is designed for cutting foams, films and other materials that are difficult to cut.Available in a wide variety of teeth per inch configurations.
Contact Wagner Die Supply for a complete listing of National Steel Rule products.
Above is a limited sample of typical tooth and space configurations, many other configurations are available from our extensive inventory.
Thickness: 1 PT 1-1/2 PT 2 PT 3 PT 4 PT 6 PT 8 PT.014” (0.36 mm) .021” (0.53 mm) .028” (0.71 mm) .042” (1.07 mm) .056” (1.42 mm) .084” (2.13 mm) .112” (2.84 mm)
Other creasing rule profiles are available, like Tru-Fold, Positive Score and MicroTrak.
S T E E L RU L E
4www.wagnerdiesupply.com
O N T A R I O , C A • T A C O M A , W A • D A L L A S , T X • E L M H U R S T , I L
Most cutting rules are available in either ground or shaved edge, and several bevel angles.
Cutting Rule -A listing of manufacturers and theirproducts with specifications and ap-plications.
Manufacturer Product Hardness Special Characteristics Product Application
TopEcono•CorrH-75UniversalUniversal 60Universal 75Universal SuperUniversal Supreme
TopDurFlex®
TopDurFlex®
Spezial 60W
Lazer Blade™Lazer Blade H™Ultra Flex#S-70
PremiumNataloy
VertexUtility 400Utility/SR
DieflexDieflex GRDieflex G12Dieflex BriteDieflex Ultra
Dieflex Hard
Diehard XD700Diehard XtremeDiehard Razor
Viking Flex HP34Viking Flex HP40Viking Flex G-44 HPViking HF 40Viking MM-40Viking MM-44Viking MM-47
A = 45 HRCA = 45 HRCA = 51 HRCB = 34 HRC, C = 57 HRCB = 45 HRC, C = 57 HRCB = 51 HRC, C = 58 HRCB = 34 HRC, C = 57 HRCB = 34 HRC, C = 57 HRC
B = 35 HRC, C = 53 HRC
B = 35 HRC, C = 53 HRC
B = 34 HRC, C = 57 HRCB = 45 HRC, C = 57 HRCA = 44 HRCA = 43-46 HRC
B = 38 HRC, C = 54 HRCA = 41-44 HRC
A = 44 HRCA = 40 HRCA = 40 HRC
2 PT Dieflex products:B = 39 HRC, C = 57 HRC
3 PT Dieflex products:B = 35 HRC, C = 57 HRC
B = 41 HRC, C = 57 HRC
B = 44 HRC, C = 60 HRCB = 47 HRC, C = 59 HRCB = 47 HRC, C = 59 HRC
B = 34 HRC, C = 61 HRCB = 40 HRC, C = 61 HRCB = 44 HRC, C = 61 HRCB = 40 HRC, C = 51 HRCA = 40 HRCA = 44 HRCA = 47 HRC
-3 PT only----Radius Back (K-Back)Special coating
-
Micro-ground finish
----
-Can be edge hardened
-3 PT only2 PT only
-Ground edgeVery fine ground edge
Mirror finishSpecial Coating
-
42° bevelExtra-fine ground edge30° bevel, mirror finish
Plasma beam hardenedPlasma beam hardenedPlasma beam hardened----
Cardboard, corrugated, labelsCorrugated boardGaskets, rubber, cork, feltCardboard, corrugated, labelsPlastics, thin gaskets, foilsMetal foils, gaskets, plasticsCardboard, labelsRecycled cardboard
Labels, cardboard
Labels, foils, coated materials,recycled board
Cardboard, corrugated, labelsPlastic, thin gaskets, foilsCardboard, corrugated, labelsPaperboard, corrugated
CorrugatedCorrugated
Solid fiber and corrugatedCorrugatedShort run - paperboard
Solid fiber and corrugatedLaminated and fiberousLaminated plastics, coated boardVirgin and recycled boardSolid and corrugated board
Solid & corrugated board, plastics
Abrasive materials, gaskets,PET plastics, laminated boardsElectronic panels, laminatedpaper, PET plastics
Recycled and virgin paperboardRecycled and virgin paperboardGaskets, hard to cut materialsPaperboardPaperboard, corrugatedPaperboard, corrugatedPaperboard, corrugated
A B
C
Through Hardened Edge Hardened, Softer Body
Refer to “Hardness” column for individual (HRC) Rockwell readings.
D I E ROOM SUP P L I E S
5www.wagnerdiesupply.com
O N T A R I O , C A • T A C O M A , W A • D A L L A S , T X • E L M H U R S T , I L
Dieboard -Flat - Birch & MapleRotary - Maple &Mixed Core
Jig Saw Blades -For Richards, Laborsaber,Sandvik, Sabermatic andCutawl
Spur Drill Bits -Larger sizes available inmulti-spur design
Router Bits -for diemakers using routers.Use Wagner ColletCare forcleaning, lubricating andprotecting spindles.
Kevlar®Gloves -Safety gloves - ideal forhandling and ruling dies.
Diemaker’s Apron -Saves wear and tear onclothing, handy pocket onfront for scribes and pens.
Quicknick Grinders -In 110V, 220V or pneu-matic versions.
Dumore Grinder -Model #10-351 22,000 RPMmax, uses #39 mandrel
Handee Air Grinder -17,500 RPM max @ 90 PSI
Dremel Moto Tool ® -28,000 RPM uses #409 and#420 grinding discs only
G-Lam Adhesive -For Laminating two 5/16”routed dieboard beforeknifing.
Grinding Wheels -Rubber-bonded orreinforced wheels invarious thicknesses.
Nicking Chisel -Inexpensive way to nickor increase nick width,complete with three tips.020, .030 and .040.
Pocket Scribes -#81 - 3/8” dia., #83 - 1/4”dia., #88 - Carbide pointwith pocket clip
Retractable Pins -Used in blister packagingfor registration, made ofaluminum
Registration Pins -Close tolerance retractablepins, 1/8”, 5/32”, 3/16” &1/4” sizes available
D I E ROOM SUP P L I E S
6www.wagnerdiesupply.com
O N T A R I O , C A • T A C O M A , W A • D A L L A S , T X • E L M H U R S T , I L
Extractor 2000 -The safe way to pull rule,designed and manufacturedby Wagner Die Supply
Bar-Plate Rule Puller -Lifts rule as close as 1/4”apart
Helmold Rule Puller -8-1/4” long, 1” wide jawwith 5/8” deep throat
Channellock Pullers -7”, 8”, 10” & 14” sizes
Elastomer Mallets -#4, #4L - 2” dia. head#5, #6 - 2-3/4” dia. head
Urethane Mallets -#4, #2x5 - 1-7/8” dia. head#5 - 2-1/2” dia. head
Rawhide Mallets -#3 - 1-3/4” dia. head#4 - 2” dia. head#5 & #6 - 2-3/4” dia. head
Multi-Cutter -Cuts rubber and non-metallic matrix.
Diemaker’s Hammer -Features 3 distinct and re-placeable work heads, fromBar-Plate
Rule Setter -Perfectly seats and levelssmall pieces of steel rulefrom Bar-Plate
Rule Tamper -Dead blow, bounce-backfree, and low impact byBar-Plate
Rule Tweaker -Available in either 2 or 3 pt.versions from Bar-Plate.
Economy Sharpener -For use on knives, blades &scissors*
Ring Knives -Ring sizes: 4, 5, 6, 7, 8, 9,10, 11 and 12
Super Sharpener -For spot sharpening of ruleon dies, includes safetyshield*
Hand Rule Cutter -Cuts 2 & 3 pt. rules
* Designed for sharpening dies which cut into a cutting pad.
D I E ROOM SUP P L I E S
7www.wagnerdiesupply.com
O N T A R I O , C A • T A C O M A , W A • D A L L A S , T X • E L M H U R S T , I L
Die Bolts -1/4” x 1-1/8”, 5/16” x1-1/8”, 5/16” x 1-3/8” sizesand Hamada style.
Pinch Dogs -Holds 2 pieces of dieboardtogether temporarily
Speed Mount WasherExclusively designed forrotary dies
T-Nuts -Available in both standardand metric sizes.
Coil Keepers -Specially designed hook &loop fasteners that keepsteel rule coils secure.
Rotary Hoops -Precision rotary hoops forMartin® Posi-lock® System.
DieMatte™ Film -Frosted matte Mylar® onone or both sides in .003thru .007 thickness
Carbon Paper -available in various sizes.
Shoulder Flex 2 -Surface mounted, helpscorrugated from cracking,available in 2 sizes. Can beglued-down or stapled.
Rule Guards -Help maintain alignmenton rotary dies.
4-Way Hardware -Adjustable slot for 2” to3” hole spacing, 1/4” and5/16” widths available.
Type Perf -3/4” or 3/8” characters,track available for bothsizes
Corrugated Fasteners3/8” and 1/2” sizes, settingtool available
Air Fastener Gun -Used for installingcorrugated fasteners.
Air Tacker -for aluminum stripperand score
LeGard -Lead edge knife brace forrotary dies, reduces leadknife failure
D I E ROOM SUP P L I E S
8www.wagnerdiesupply.com
O N T A R I O , C A • T A C O M A , W A • D A L L A S , T X • E L M H U R S T , I L
Stripping Pins -50 mm long, flat, singlepoint and multi-point
Spring Pins -2” long, used as strippingpins
Inca Nails -50 mm long stripping pins
Female Clamping JawsMade from Nylon, includesinstallation screws
Easi-Blank Joggers -Designed for universal use
Blanking Easi-Foam -Ideal for the male blankingtool
Distance Spacers -Used in stripping andblanking tooling.
Trim Breakers -Available in right or leftside versions, along withuniversal style.
Easi-Blank System -Assembled frame kit withjoggers
Easi-Blank Frame Kit -Designed for Bobst andIberica blanker presses
Speed Bars -Holds sheets in placeduring blanking process
Stackers -3/16” and 5/16” with screws
Centerline Products - Storarge Bolts and Nuts,Separating Knives, Clamping Jaws, Stop PlatesCentering Brackets, Strengtheners and Un-threaded T-Nuts.
STRIPPING & BLANKING TRAINING ARE AVAILABLE AT THE WERC CENTER!
E J E C T I ON MAT E R I A L S
9www.wagnerdiesupply.com
O N T A R I O , C A • T A C O M A , W A • D A L L A S , T X • E L M H U R S T , I L
Wave
E-Z Set by Monroe
Ejecto-Flex by Monroe
Stripping Foam -Gray 6#, White 2#
Grip N’ Strip -Holds tight and strips clean,water-based, in 1 qt., and1 gal. sizes
SuperSet -Ideal for non-porous rubber,quick setting, available in1 lb. and 1 oz. bottles.
D Profile Rubber -Helps hold sheets togetherin high speed diecutting,reduces nicks needed in die
Kushion Crease -For rotary dies, reducesfractured scores
Die Prene 80Economical slot rubber
C-Profile Rubber -60 Durometer material,White non-markingcompound
Dura Strip & VulcanSheets -Premium slot rubber
Di-PointWagner Die Supply offers a complete line ofopen and closed cell ejection materials.
Green G’rilla™is Monroe’sspecialty slot
rubber.Available inwave, scallopand E-Z Setprofiles.
Red Rhinois Monroe’s
ejection materialfor thick and
thin substratesthat eliminatescrushing. Avail-able in all pro-
files.
Pro-Pel™is Monroe’slow-profile
ejection materialdesigned
specifically forhigh-speed
rotarydiecutting.
CR EA S I NG MATR I X
10www.wagnerdiesupply.com
O N T A R I O , C A • T A C O M A , W A • D A L L A S , T X • E L M H U R S T , I L
Plastrix™ Matrix -One-piece Plastic Matrixprevents delaminating orseparating. Ultra-smoothprofile eliminates the needfor taping or ramping.
Marathon™ Matrix VF -Vulcanized Fiberboard Matrix.Marathon Matrix is film based,so there is no need for creasingrule height adjustments.
Channel® Creasing Matrix -Original Metal-base Matrix
Multi-cutterCCM Bench MiterPress
Bobst Metrix - Metal BaseMatrix
Bobst Syntrix - All PlasticMatrix
Bobst Fibrix - PressboardMatrix
Matrix Miter Plier Dolphin Cutter -Performs easy angle cutson matrix or rubber
Tapered edges for smooth feed. Eliminates jamming, and ensures a uniform and well-defined crease throughout your run.
D I E CU T T I NG & MAKER EADY
11www.wagnerdiesupply.com
O N T A R I O , C A • T A C O M A , W A • D A L L A S , T X • E L M H U R S T , I L
Thin Plates -Available in soft, mediumand hard. Helps reducemakeready from run to run
Phenolic Material -Flexible or rigid, .017 to.049 thick in 1 metersquare sheets
Phenolic CounterplateLocating Pins
CounterplateLocating Rings
Cutting Jackets -For Miehle, Miller,Heidelberg and manyother presses
Cutting Plates -47 - 52 RC Hardened forBobst, Brausse, Kluge,Heidelberg, Thompsonand many others
Cutting Plate CleanerQuick, residue-free cleaning
Counterboard -Available in VulcanizedFiber, Genuine Pressboardand Jute Tag
Score Cutting andSkiveready Knives
Double Face Tape -1”, 2”, 6” and 12” WideRolls
Sample Maker’sCreasing Rule Holderand Scoring Tool
Corrugated BoxScore Cutting Knife
Profitape® -Blue: .001”, Red: .002”and Yellow: .003” in 1/4”(6mm) width. Dispenser isalso available.
Fit Tape -.0015 x 5/16” steel shimtape in 33’ rolls, self-ad-hesive
Shim Tapes -.002 and .005 in 33’ or 100’rolls, made from stainlesssteel, self-adhesive
Makeready Tapes& Dispenser -1/4” or 1/2” wipe tape in.0015, .003 or .006thicknesses
DIECUTTING MAKEREADY & PRODUCTIVITY TRAINING PROGRAMS ARE AVAILABLE AT WERC!
D I E CU T T I NG & MAKER EADY
12www.wagnerdiesupply.com
O N T A R I O , C A • T A C O M A , W A • D A L L A S , T X • E L M H U R S T , I L
Air Stripping HammerQuickly strips and separateswaste from diecut parts, ac-cessories also available
Air Tool Balancer -Supports tools weighing5 to 20 lbs.
MA Series III CuttingPress -adjustable to rule heightsof .75 to 1.5, 4-5 tons ofcutting pressure
Stripping Hammer -For stripping waste andtrim by hand
Wagner Grabber -The safe way to removescrap and debris from thestripping end of the press!
G&R Stop Guides -For use on clam shell typepresses when cuttingcorrugated material
Adjusto Guides -Available in 2” x 2” or2” x 1” versions fromBar-plate.
Wood Furniture -Available in 36” lengths,5/8” tall in a variety ofpicas.
Quoins & Keys -Quoins are available in3”, 6”, 9” and 12” lengths
Torque Key -Prevents damage to quoinsfrom over-tightening
Econo Quion & Key -3” long, features a wedgelocking system.
Steel Stop Pins -Precision ground to helpprotect steel rule dies fromdamage
Wagner Die Supply - is an Author-ized Distributor of Bobst parts and sup-plies for autoplatens includingstripping and blanking components.
Wagner is a designated stocking station(Elmhurst, IL and Ontario, CA) for DICARanvil covers.
Bar-Plate Stripmates -BP 1 and 2 are hand-powered, BP 3 isair-powered. Off-press internal strip-ping units.
D I E ROOM EQU I PMEN T
13www.wagnerdiesupply.com
O N T A R I O , C A • T A C O M A , W A • D A L L A S , T X • E L M H U R S T , I L
Wagner Bender - Limited number available.
Wagner Notcher
Wagner Bender Die Sets
Extractor Jaws -Replacement Jaws for 2000 and 3000 models, available instandard or “cut-down” version for tight rule layouts.
Wagner Extractor 2000 -with Pins, Pads & Caddy
Wagner Delta Trimmer Wagner Plain Trimmer
Super Side Gauge -for Wagner and Helmold equipment
Wagner Extractor 3000 -pneumatic rule puller, keeps hands safelyaway from cutting rule
DIEMAKING TRAINING IS AVAILABLE AT WERC!
standardcut-down
Visit our website:www.wagnerdiesupply.comfor a complete listing of dieequipment, replacementparts and schematics.
D I E ROOM EQU I PMEN T
14www.wagnerdiesupply.com
O N T A R I O , C A • T A C O M A , W A • D A L L A S , T X • E L M H U R S T , I L
Helmold Bendall -Also available in Standard,Heavy Duty and E-Z models
Helmold Cutter -Models are available forcutting steel rule up to 1-1/2”, 2-1/8” or 2-7/8” in height
Rotary Miter Knives -for 1-1/2” model Helmold Cut-ter
Helmold StandardNotcher -Many notch sizes available.
Helmold Miter -Single and Right and Lefthand models
Helmold Heavy Duty -2 & 4-hole Notchers, alsoavailable in E-Z model
Helmold Power -As-sist Bender &Notcher
Helmold Cutawl Saw -for Flat and Rotary dieboards
Bar-Plate HandBroacher
Bar-Plate AutomaticBroacher
Curver/Flatener Tool -for rotary rule.
Sabermatic Die Saws -42” model shown above, also available in 52”,56”, 62” models
Sabermatic Rotary ProofingMachine and Ruling Drum
4-hole version
H ENDER SON S TORAGE SY S T EMS
15www.wagnerdiesupply.com
O N T A R I O , C A • T A C O M A , W A • D A L L A S , T X • E L M H U R S T , I L
Storage Systems -For 5/8” and 3/4” dieboards, strippingand blanking tooling
Easi-Hanger Blanking SystemHanger Brackets
Rotary Die Storage System and Rotary Transfer Cart
Mounted and UnmountedPrinting Plate Storage -Hooks are also available separately
Litho Plate Storage -Hooks are also available separately
Flat Die Storage Pins -1/8” pin for 5/8” wood, 3/16” pin for3/4” wood
Printing Plate Transfer Cart Ink Storage Units
Flat Die Transfer Cart
Custom Storage Systems can also be designed and manufactured upon request.
2041 Elm Court, Ontario, CA 91761Toll-Free (800) 423-4478(909) 947-3044 • Fax: (909) 923-7809Toll-Free Fax Ordering: (866) 786-2437
E-mail orders: sales@wagnerdiesupply.com
Northwest Shipping Point - Tacoma, WA
2532 Converse Street, Dallas, TX 75207Toll-Free (800) 262-4695(214) 630-4695 • Fax: (214) 630-5425
Toll-Free Fax Ordering: (800) 446-6651
E-mail orders: sales@wagnerdiesupply.com
960 Industrial Drive, Unit 8, Elmhurst, IL 60126Toll-Free (800) 334-7914(630) 782-6230 • Fax: (630) 782-6220
Toll-Free Fax Ordering: (800) 554-9124
E-mail orders: sales@wagnerdiesupply.com
P-U-N-C-H-E-S
WES T COAS T
SOU THWES T
M IDWES T
www.wagnerdiesupply.com
America’s Die Supply leader.Celebrating over six decades of service.
For the latest information and updates, visit our website at:
An E.S.O.P., Employee-owned Company.
MEMBER
Recommended