View
223
Download
3
Category
Preview:
Citation preview
Coatings, Adhesives and Sealants in the GCC December 2012
www.constructarabia.com www.ventures-me.com
Coatings, Adhesives and Sealants in
Coatings, Adhesives and Sealants in
Coatings, Adhesives and Sealants in the GCCDecember 2012
Table of Contents Coatings, Adhesives and Sealants in the GCC
Coatings, Adhesives and Sealants ................................
Coatings ................................................................
Adhesives and Sealants ................................
GCC Building Construction Sector overview and Top Building Projects
Figures Figure 1: GCC Adhesives Market Size (Thousand Metric Tons), 2008
Tables Table 1: Top 30 Building Construction Projects across the GCC (US$ Million), December 2012
Coatings, Adhesives and Sealants in the GCC
www.constructarabia.com www.ventures-me.com
Coatings, Adhesives and Sealants in the GCC December 2012 ................................................................
................................................................................................
................................................................................................
................................................................................................
GCC Building Construction Sector overview and Top Building Projects ................................
Figure 1: GCC Adhesives Market Size (Thousand Metric Tons), 2008-2013 ....... Error! Bookmark not defined.
Table 1: Top 30 Building Construction Projects across the GCC (US$ Million), December 2012
P a g e : 2
......................................... 1
...................................................... 3
.............................................................. 4
...................................................................... 4
............................................................ 7
Error! Bookmark not defined.
Table 1: Top 30 Building Construction Projects across the GCC (US$ Million), December 2012 ...................... 8
Coatings, Adhesives and Sealants in the GCCDecember 2012
Coatings, Adhesives and SealantsConstruction in the Gulf Cooperation Council (GCC) countries, after more than two decades
matured into a quality driven industry with due regard to safety and a new sensitivity to environmental
compatibilities to usher in an era where great importance is now placed on the quality and sustainability of
a construction or development in the
materials, which help enhance, the quality and sustainability of construction
the momentum has caught on to the coatings, adhesives and sealants market in t
Paints, coatings, adhesives and sealants are extensively used in the construction and automotive industries
and in a region characterized by a highly affluent and growing population, increasing standards of living and
strong government backing for expansion and diversification of the economy and its industries,
construction activity and its associated coatings, adhesives and sealants market have received a strong fillip
in recent years and likely to exhibit strong growth potential as these economies
of the global economic slowdown.
The indoor quality of a building construction and its surrounding built environment is determined by the
quality of paints, coatings, adhesives and sealants used and therefore the latter plays a
ensuring not only air quality within a building but also the energy efficiency of its heating and cooling
systems. In view of the desert’s harsh climatic conditions prevailing in the GCC, coatings, sealants and
adhesives provide the required materials to ensure air tightness of the building envelope as well as
preventing deterioration of building exteriors and interiors due to moisture infiltration, poor indoor
temperature and humidity levels and deterioration of building materials used in
tightness ensures reduced air transfer through the building exterior fabric thus reducing the energy
required to heat or cool it and increasing energy efficiency of the building.
In recent years GCC economies have embarked on amb
wherein infrastructure projects have received strong focus. Moreover, the global economic slowdown and
the social unrest following the Arab Spring have also shifted government emphasis onto affordable housing
in GCC countries, as there was a huge demand supply mismatch across the residential segments of most of
the GCC building construction markets that required the urgent attention of the policy makers, forcing
countries such as Saudi Arabia, Bahrain and Kuwai
Coatings, Adhesives and Sealants in the GCC
www.constructarabia.com www.ventures-me.com
Coatings, Adhesives and SealantsConstruction in the Gulf Cooperation Council (GCC) countries, after more than two decades
matured into a quality driven industry with due regard to safety and a new sensitivity to environmental
compatibilities to usher in an era where great importance is now placed on the quality and sustainability of
a construction or development in the region than the construction itself. In this era, the
the quality and sustainability of construction, have gained importance and
the momentum has caught on to the coatings, adhesives and sealants market in t
Paints, coatings, adhesives and sealants are extensively used in the construction and automotive industries
and in a region characterized by a highly affluent and growing population, increasing standards of living and
expansion and diversification of the economy and its industries,
construction activity and its associated coatings, adhesives and sealants market have received a strong fillip
in recent years and likely to exhibit strong growth potential as these economies surface from the aftermath
The indoor quality of a building construction and its surrounding built environment is determined by the
quality of paints, coatings, adhesives and sealants used and therefore the latter plays a
ensuring not only air quality within a building but also the energy efficiency of its heating and cooling
systems. In view of the desert’s harsh climatic conditions prevailing in the GCC, coatings, sealants and
red materials to ensure air tightness of the building envelope as well as
preventing deterioration of building exteriors and interiors due to moisture infiltration, poor indoor
temperature and humidity levels and deterioration of building materials used in
tightness ensures reduced air transfer through the building exterior fabric thus reducing the energy
required to heat or cool it and increasing energy efficiency of the building.
In recent years GCC economies have embarked on ambitious expansion and diversification programs
wherein infrastructure projects have received strong focus. Moreover, the global economic slowdown and
the social unrest following the Arab Spring have also shifted government emphasis onto affordable housing
in GCC countries, as there was a huge demand supply mismatch across the residential segments of most of
the GCC building construction markets that required the urgent attention of the policy makers, forcing
countries such as Saudi Arabia, Bahrain and Kuwait have allocated vast sums in their budgets toward
P a g e : 3
Coatings, Adhesives and Sealants Construction in the Gulf Cooperation Council (GCC) countries, after more than two decades of growth, has
matured into a quality driven industry with due regard to safety and a new sensitivity to environmental
compatibilities to usher in an era where great importance is now placed on the quality and sustainability of
region than the construction itself. In this era, the importance of raw
have gained importance and
the momentum has caught on to the coatings, adhesives and sealants market in the GCC.
Paints, coatings, adhesives and sealants are extensively used in the construction and automotive industries
and in a region characterized by a highly affluent and growing population, increasing standards of living and
expansion and diversification of the economy and its industries,
construction activity and its associated coatings, adhesives and sealants market have received a strong fillip
surface from the aftermath
The indoor quality of a building construction and its surrounding built environment is determined by the
quality of paints, coatings, adhesives and sealants used and therefore the latter plays a pivotal role in
ensuring not only air quality within a building but also the energy efficiency of its heating and cooling
systems. In view of the desert’s harsh climatic conditions prevailing in the GCC, coatings, sealants and
red materials to ensure air tightness of the building envelope as well as
preventing deterioration of building exteriors and interiors due to moisture infiltration, poor indoor
temperature and humidity levels and deterioration of building materials used in the building. Better air
tightness ensures reduced air transfer through the building exterior fabric thus reducing the energy
itious expansion and diversification programs
wherein infrastructure projects have received strong focus. Moreover, the global economic slowdown and
the social unrest following the Arab Spring have also shifted government emphasis onto affordable housing
in GCC countries, as there was a huge demand supply mismatch across the residential segments of most of
the GCC building construction markets that required the urgent attention of the policy makers, forcing
t have allocated vast sums in their budgets toward
Coatings, Adhesives and Sealants in the GCCDecember 2012
developing affordable housing schemes across their country.
the importance given to tourism as a important source of foreign exchange earnings for the economies,
which in turn has also spurred growth across the hospitality and retail segments of these economies.
resultant rise in construction activity is likely to fuel demand for coatings, adhesives and sealants to feed
into the construction industries of the
Coatings
Though estimates of market size are hard to obtain
estimate the market for coatings in the GCC at around US$ 2.2 billion as of 2011.
construction, the requirement for coatings may vary between 0.5 to 10 percent of building material costs
across the GCC. Saudi Arabia and Qatar are noted to be the main
with Saudi Arabia accounting for an estimated 50 percent share of the G
and the demand for architectural and decorative coatings the fastest and largest growing segment in the
coatings market. The attractiveness of the paints and coatings market in the GCC is witnessed in the trend
of large number of players entering the market making it a low margin high volume business. With no clear
standards or rules as yet established, companies can gain market share
mature as its European and other Western counterparts,
latest technologies to provide the required edge in this market.
international players in the coatings market
Adhesives and Sealants
Adhesives and Sealants are speciality chem
applications representing a market of 12.2 million tons globally from uses of which adhesives account for
over 75 percent and sealants roughly the remaining 25 percent.
chemical compositions using similar technologies, they vary in terms of their functionality or end use.
Asian markets, the Europe, Middle East and Africa (EMEA) represents the second largest market for
adhesives and sealants with GCC‘s thriving construction industry a growing market for these specialty
chemical products. The market for adhesives and sealants can be either classified on the basis of end use
into eight broad markets or in terms of the technologies into four globally
classes of polymers used in the formulation of the
Coatings, Adhesives and Sealants in the GCC
www.constructarabia.com www.ventures-me.com
developing affordable housing schemes across their country. Many of these countries have also increased
the importance given to tourism as a important source of foreign exchange earnings for the economies,
which in turn has also spurred growth across the hospitality and retail segments of these economies.
resultant rise in construction activity is likely to fuel demand for coatings, adhesives and sealants to feed
into the construction industries of these economies.
Though estimates of market size are hard to obtain for the adhesives and sealants market
estimate the market for coatings in the GCC at around US$ 2.2 billion as of 2011.
ment for coatings may vary between 0.5 to 10 percent of building material costs
Qatar are noted to be the main users of coatings
with Saudi Arabia accounting for an estimated 50 percent share of the GCC market demand
and the demand for architectural and decorative coatings the fastest and largest growing segment in the
The attractiveness of the paints and coatings market in the GCC is witnessed in the trend
of players entering the market making it a low margin high volume business. With no clear
standards or rules as yet established, companies can gain market share in this market which is not yet as
mature as its European and other Western counterparts, through making the first move or innovating using
latest technologies to provide the required edge in this market. There is a significant presence of
international players in the coatings market
Adhesives and Sealants
Adhesives and Sealants are speciality chemical products that are extensively used across a wide variety of
applications representing a market of 12.2 million tons globally from uses of which adhesives account for
over 75 percent and sealants roughly the remaining 25 percent. While adhesives and se
chemical compositions using similar technologies, they vary in terms of their functionality or end use.
Asian markets, the Europe, Middle East and Africa (EMEA) represents the second largest market for
GCC‘s thriving construction industry a growing market for these specialty
chemical products. The market for adhesives and sealants can be either classified on the basis of end use
in terms of the technologies into four globally well known technologies or 15
classes of polymers used in the formulation of the product.
P a g e : 4
Many of these countries have also increased
the importance given to tourism as a important source of foreign exchange earnings for the economies,
which in turn has also spurred growth across the hospitality and retail segments of these economies. The
resultant rise in construction activity is likely to fuel demand for coatings, adhesives and sealants to feed
for the adhesives and sealants market, analysts
estimate the market for coatings in the GCC at around US$ 2.2 billion as of 2011. Depending on the type of
ment for coatings may vary between 0.5 to 10 percent of building material costs
users of coatings in the coatings market
CC market demand for coatings
and the demand for architectural and decorative coatings the fastest and largest growing segment in the
The attractiveness of the paints and coatings market in the GCC is witnessed in the trend
of players entering the market making it a low margin high volume business. With no clear
in this market which is not yet as
ugh making the first move or innovating using
There is a significant presence of
ical products that are extensively used across a wide variety of
applications representing a market of 12.2 million tons globally from uses of which adhesives account for
While adhesives and sealants have similar
chemical compositions using similar technologies, they vary in terms of their functionality or end use. After
Asian markets, the Europe, Middle East and Africa (EMEA) represents the second largest market for
GCC‘s thriving construction industry a growing market for these specialty
chemical products. The market for adhesives and sealants can be either classified on the basis of end use
well known technologies or 15
Coatings, Adhesives and Sealants in the GCCDecember 2012
Water-borne systems that are used across more than half of the market for adhesives and sealants are
used across building construction, packaging and conversion
used in construction applications as contact adhesives
the environmental regulations requiring
environmental compliance, thereby putting a brake on the growth of this segmen
other systems have overtaken it by clear substitution.
and sealants and is used in structural adhesiv
normally has a sustained market worldwide. The fourth polymer system popularly used worldwide are hot
melts that are pure solid systems used in packaging/conversions, woodworking and joinery and ot
product assembly adhesives, a fast growing market segment worldwide.
Adhesive and Sealants are primarily comprised of four main raw material classes as polymer bases, namely,
vinyls, acrylics, rubber (both natural and synthetic) and polyurethane t
technologies in varying compositions.
Some other raw materials used in the manufacture of adhesives and sealants that are more application
specific include epoxies, silicones, natural products like starches and dextrin
such used in niche markets such as modified acrylics, anaerobics,
cyanoacylates.
Adhesive and sealant demand across the construction sector comprises nearly 25 percent of the demand
for the products across applications.
are other major markets for adhesive and sealants across the GCC apart from infrastructure which is the
current focus of most GCC countries.
adhesives market at approximately 2 percent of the global market wherein the market was further broken
down into the following broad segments, namely
Hot Melt Adhesives and Poly Urethane Adhesives (PUA), with PVA and RBA representing the largest shares
in the market followed by Hot melt and PUA as of 2011.
Coatings, Adhesives and Sealants in the GCC
www.constructarabia.com www.ventures-me.com
that are used across more than half of the market for adhesives and sealants are
used across building construction, packaging and conversion based applications. Solvent borne systems
used in construction applications as contact adhesives though these systems are highly restricted based on
the environmental regulations requiring minimal use of Volatile Organic Compounds (VOC) that are agains
environmental compliance, thereby putting a brake on the growth of this segmen
other systems have overtaken it by clear substitution. Reactive systems or chemically reactive adhesives
and is used in structural adhesive bonding and sealant formulations and this market segment
normally has a sustained market worldwide. The fourth polymer system popularly used worldwide are hot
melts that are pure solid systems used in packaging/conversions, woodworking and joinery and ot
product assembly adhesives, a fast growing market segment worldwide.
Adhesive and Sealants are primarily comprised of four main raw material classes as polymer bases, namely,
natural and synthetic) and polyurethane that are used across applications and
technologies in varying compositions.
Some other raw materials used in the manufacture of adhesives and sealants that are more application
specific include epoxies, silicones, natural products like starches and dextrins apart from high value adds
such used in niche markets such as modified acrylics, anaerobics, polysulphides
Adhesive and sealant demand across the construction sector comprises nearly 25 percent of the demand
ts across applications. The oil and gas, refining and water desalination and filtration sectors
are other major markets for adhesive and sealants across the GCC apart from infrastructure which is the
current focus of most GCC countries. Rough estimates by analysts, put the market value of the GCC
adhesives market at approximately 2 percent of the global market wherein the market was further broken
down into the following broad segments, namely Poly Vinyl Acetate (PVA), Rubber Based Adhesives (RBA),
d Poly Urethane Adhesives (PUA), with PVA and RBA representing the largest shares
in the market followed by Hot melt and PUA as of 2011.
P a g e : 5
that are used across more than half of the market for adhesives and sealants are
based applications. Solvent borne systems are
though these systems are highly restricted based on
olatile Organic Compounds (VOC) that are against
environmental compliance, thereby putting a brake on the growth of this segment in general globally as
Reactive systems or chemically reactive adhesives
e bonding and sealant formulations and this market segment
normally has a sustained market worldwide. The fourth polymer system popularly used worldwide are hot
melts that are pure solid systems used in packaging/conversions, woodworking and joinery and other such
Adhesive and Sealants are primarily comprised of four main raw material classes as polymer bases, namely,
hat are used across applications and
Some other raw materials used in the manufacture of adhesives and sealants that are more application
s apart from high value adds
polysulphides, polyolefins and
Adhesive and sealant demand across the construction sector comprises nearly 25 percent of the demand
The oil and gas, refining and water desalination and filtration sectors
are other major markets for adhesive and sealants across the GCC apart from infrastructure which is the
analysts, put the market value of the GCC
adhesives market at approximately 2 percent of the global market wherein the market was further broken
Poly Vinyl Acetate (PVA), Rubber Based Adhesives (RBA),
d Poly Urethane Adhesives (PUA), with PVA and RBA representing the largest shares
Coatings, Adhesives and Sealants in the GCCDecember 2012
The coatings, adhesive and sealants market is characterized by the need for constant innovation and th
key to survival and gaining market share is not only to invest in constant innovation but to also constantly
move toward water based solvents and other environmentally sound product mix to conform to the GCC’s
rising need to meet environmental certificat
hydrocarbons.
Coatings, Adhesives and Sealants in the GCC
www.constructarabia.com www.ventures-me.com
The coatings, adhesive and sealants market is characterized by the need for constant innovation and th
key to survival and gaining market share is not only to invest in constant innovation but to also constantly
move toward water based solvents and other environmentally sound product mix to conform to the GCC’s
rising need to meet environmental certifications across the markets be it construction, automotive, or
P a g e : 6
The coatings, adhesive and sealants market is characterized by the need for constant innovation and the
key to survival and gaining market share is not only to invest in constant innovation but to also constantly
move toward water based solvents and other environmentally sound product mix to conform to the GCC’s
ions across the markets be it construction, automotive, or
Coatings, Adhesives and Sealants in the GCCDecember 2012
GCC Building Sector overview and Top Projects The main market for Coatings, Adhesives and Solvents (CAS) is the
one of the emerging global markets that has emerged
unscathed compared to its European and other global neighbours
products the most. The primary driver for this upward trend i
dependence on the fast depleting hydrocarbon base,
and the Arab Spring, for which, the GCC economies have in recent years
expansion and diversification plans involving huge government spending across their industrial, energy and
infrastructure sectors alongside building up their social infrastructure such as affordable housing,
education, healthcare and sanitation so as to upgrade the standards o
sustainable economic growth across a varied base of basic and heavy industries.
directly or indirectly drive demand for CAS products at exponential rates and are likely to do so much more
riding the GCC expansion phase in the near future.
While the GCC construction industry
owing to these government investment plans, it also rapidly met the end of the boom, as profligate
spending and unchecked building construction combined with the adverse impact of the global economic
slowdown shrinking credit availability brought these markets to a craw
that affected other economies of the Gulf, proved to be a mixed blessing in terms of reversing investment
and tourist flows to the GCC as it began to be perceived as a safe haven for investors amid the slowdown as
it made a strong rebound. Regulations and stronger emphasis on building codes and quality have given a
big boost to this recovery trend.
Recovery has however been gradual though strong in 2010 and 2011 and the construction industries across
the region restarted erstwhile projects shelved or put on hold and
projects. Amid the turbulent times of 2009 and 2010
Bahrain and Kuwait were marginally affected adversely by the Arab Sprin
Coatings, Adhesives and Sealants in the GCC
www.constructarabia.com www.ventures-me.com
Building Construction overview and Top Building
main market for Coatings, Adhesives and Solvents (CAS) is the GCC building construction industry
the emerging global markets that has emerged from the global economic slowdown relatively
unscathed compared to its European and other global neighbours as well as likely to fuel demand for CAS
The primary driver for this upward trend is as much the GCC need
dependence on the fast depleting hydrocarbon base, as to combat any adverse effects of the slowdown
the GCC economies have in recent years, embarked upon ambitious
fication plans involving huge government spending across their industrial, energy and
infrastructure sectors alongside building up their social infrastructure such as affordable housing,
education, healthcare and sanitation so as to upgrade the standards of living of its masses while achieving
sustainable economic growth across a varied base of basic and heavy industries.
directly or indirectly drive demand for CAS products at exponential rates and are likely to do so much more
the GCC expansion phase in the near future.
While the GCC construction industry had witnessed a tremendous growth phase between 2007 and 2009
government investment plans, it also rapidly met the end of the boom, as profligate
spending and unchecked building construction combined with the adverse impact of the global economic
slowdown shrinking credit availability brought these markets to a crawl by end of 2009. The Arab Spring
that affected other economies of the Gulf, proved to be a mixed blessing in terms of reversing investment
and tourist flows to the GCC as it began to be perceived as a safe haven for investors amid the slowdown as
Regulations and stronger emphasis on building codes and quality have given a
gradual though strong in 2010 and 2011 and the construction industries across
rstwhile projects shelved or put on hold and thereafter also
Amid the turbulent times of 2009 and 2010, UAE markets took the largest battering, while
Bahrain and Kuwait were marginally affected adversely by the Arab Spring and social and
P a g e : 7
Construction Building
GCC building construction industry is
from the global economic slowdown relatively
as well as likely to fuel demand for CAS
s as much the GCC need to reduce their
as to combat any adverse effects of the slowdown
embarked upon ambitious
fication plans involving huge government spending across their industrial, energy and
infrastructure sectors alongside building up their social infrastructure such as affordable housing,
f living of its masses while achieving
sustainable economic growth across a varied base of basic and heavy industries. All these industries
directly or indirectly drive demand for CAS products at exponential rates and are likely to do so much more
witnessed a tremendous growth phase between 2007 and 2009
government investment plans, it also rapidly met the end of the boom, as profligate
spending and unchecked building construction combined with the adverse impact of the global economic
l by end of 2009. The Arab Spring
that affected other economies of the Gulf, proved to be a mixed blessing in terms of reversing investment
and tourist flows to the GCC as it began to be perceived as a safe haven for investors amid the slowdown as
Regulations and stronger emphasis on building codes and quality have given a
gradual though strong in 2010 and 2011 and the construction industries across
thereafter also gradually resumed fresh
markets took the largest battering, while
g and social and political unrests
Coatings, Adhesives and Sealants in the GCCDecember 2012
across these states. However, govern
to prevent a spread of such unrests by concentrating on investments across the infrastructure and social
housing sectors, thus giving a boost to the construction industry alongside.
Building projects worth over US$ 62.5
sectors including residential, commercial, hospitality and retail and is likely to reac
after a brief decline in 2012 to US$ 48.4 billion as a number of projects earlier resumed after the slowdown
neared completion and oversupply was tackled with a more cautious approach to fresh contract awards
until normalcy was gradually restored
2012, that have prompted analysts to revise growth estimates for the GCC region upward, citing
fundamentals such as its strong and consistent economic growth, political sta
neighbourhood, strong oil prices boosting their revenues, clear
fuel the growth across its non-oil sectors, for the revision.
construction in 2013. The following is the list of top building projects across the GCC as of
Table 1: Top 30 Building Construction Projects across the GCC (US$ Million),
Project Name
Country Client
Barwa Al Khor Project - Urjuan
Qatar Barwa Real Estate Company
Amphibious 1000
Qatar Seaquest Marine Technology Plc
Viva Bahriya Qatar United Development Company (UDC)
Lusail Phase II - Fox Hills
Qatar Qatari Diar Real Estate Investment Company (QDREIC)
Energy City Project - Phase 1
Qatar Energy City
Coatings, Adhesives and Sealants in the GCC
www.constructarabia.com www.ventures-me.com
across these states. However, governments across the GCC came back with heavy socio
to prevent a spread of such unrests by concentrating on investments across the infrastructure and social
s, thus giving a boost to the construction industry alongside.
62.5 billion were awarded to contractors in 2011 across all the building
sectors including residential, commercial, hospitality and retail and is likely to reac
after a brief decline in 2012 to US$ 48.4 billion as a number of projects earlier resumed after the slowdown
neared completion and oversupply was tackled with a more cautious approach to fresh contract awards
radually restored. There are however strong growth signals
prompted analysts to revise growth estimates for the GCC region upward, citing
fundamentals such as its strong and consistent economic growth, political sta
neighbourhood, strong oil prices boosting their revenues, clear-cut government plans and vast spending to
oil sectors, for the revision. These factors are likely to fuel growth in
The following is the list of top building projects across the GCC as of
: Top 30 Building Construction Projects across the GCC (US$ Million), December 2012
Client Consultant Contractor
Barwa Real Estate Company
KEO International Consultants; Qatar
-
Seaquest Marine Technology
Giancarlo Zema Design Group
-
United Development Company
SRSS & Associates
Various Contractors
Qatari Diar Real Estate Investment Company (QDREIC)
- -
Energy City PFC Energy -
P a g e : 8
nts across the GCC came back with heavy socio-economic packages
to prevent a spread of such unrests by concentrating on investments across the infrastructure and social
billion were awarded to contractors in 2011 across all the building
sectors including residential, commercial, hospitality and retail and is likely to reach US$ 64.5 billion in 2013
after a brief decline in 2012 to US$ 48.4 billion as a number of projects earlier resumed after the slowdown
neared completion and oversupply was tackled with a more cautious approach to fresh contract awards
strong growth signals for the GCC economies in
prompted analysts to revise growth estimates for the GCC region upward, citing
fundamentals such as its strong and consistent economic growth, political stability amidst unrest in its
cut government plans and vast spending to
These factors are likely to fuel growth in
The following is the list of top building projects across the GCC as of December 2012:
Contractor Value (US$ Million)
Status
9,600
Design
500
Concept Stage
2,000
Construction
3,800
Design
3,000
Design
Coatings, Adhesives and Sealants in the GCCDecember 2012
Project Name
Country Client
New Doha International Airport
Qatar NDIA Steering Committee
Muscat International Airport Expansion - Phase 1
Oman Ministry of Transport & Communications
New Terminal at Salalah International Airport
Oman Ministry of Transport & Communications
Eco - Resort at Ras al- Hadd
Oman Ministry of Tourism; Oman; Qatari Diar Real Estate Investment Company (QDREIC)
Mutrah Redevelopment
Oman Muscat Municipality; Haya Water (OWSC)
Sohar Free Zone
Oman Sohar International Development Company
Al Khairan Residential City Project
Kuwait Public Authority for Housing Welfare (PAHW)
Coatings, Adhesives and Sealants in the GCC
www.constructarabia.com www.ventures-me.com
Client Consultant Contractor
NDIA Steering Committee
- Various Contractors
Ministry of Transport & Communicatio
COWI & Partners; Oman; Larsen Architects
TAV Construction; Turkey; Consolidated Contractors International Company (CCC); Oman
Ministry of Transport & Communicatio
COWI & Partners; Oman; Larsen Architects
Galfar Engineering & Contracting; Oman; Larsen & Toubro; Oman
Ministry of Tourism; Oman; Qatari Diar Real Estate Investment Company (QDREIC)
Dar Al Handasah; Oman; Spillis Candela DMJM
-
Muscat Municipality; Haya Water (OWSC)
- -
International Development Company
Mott MacDonald; Oman
Premier International Project
Public Authority for Housing Welfare (PAHW)
Gulf Consult; Atkins; Kuwait
Not Appointed
P a g e : 9
Contractor Value (US$ Million)
Status
10,000
Construction
Company (CCC);
4,000
Construction
Engineering &
Oman; Larsen &
760
Construction
300
Design
500
Concept Stage
2,000
Construction
27,000
Design
Coatings, Adhesives and Sealants in the GCCDecember 2012
Project Name
Country Client
Jaber Al Ahmed Al Sabah Hospital
Kuwait Ministry of Health; Kuwait; Ministry of Public Works (MPW); Kuwait
Kuwait Cancer Control Center Expansion
Kuwait Ministry Health; Kuwait
Boubyan Island Develop-ment
Kuwait Ministry of Public Works (MPW); Kuwait; Mega Projects Agency (MPA)
North Bahrain New Town Project - Main File
Bahrain Ministry of Works & Housing; Bahrain
Janayen Al Hamala Housing Develop-ment
Bahrain Al Salam Bank
20,000 Low-cost Housing Project in Bahrain - Phase 1
Bahrain Ministry of Housing; Bahrain; Naseej BSC
Kingdom Riyadh Land - Main File
Saudi Arabia Kingdom Holding Company
King Abdullah Economic City (KAEC)
Saudi Arabia Emaar Economic City; Saudi
Coatings, Adhesives and Sealants in the GCC
www.constructarabia.com www.ventures-me.com
Client Consultant Contractor
Ministry of Health; Kuwait; Ministry of Public Works (MPW); Kuwait
Gulf Consult; Langdon Wilson; Kuwait
Kuwait Arab Contractors
Ministry of Health; Kuwait
Pan Arab Consulting Engineers (PACE)
Alghanim International General Trading & Contracting; Kuwait
Ministry of Public Works (MPW); Kuwait; Mega Projects Agency (MPA)
Hellmuth Obata Kassabaum (HOK); Gulf Consult; Mouchel; Kuwait
Hyundai Engineering & Construction Company /Mohammed Abdulmohsin Al Kharafi & Sons
Ministry of Works & Housing; Bahrain
- -
Al Salam Bank Manara Developments Company
Abdulla H. Al Mutawa Sons Group (AMSG); Saudi
Ministry of Housing; Bahrain; Naseej BSC
- Chase Perdana Sdn. Bhd.
Kingdom Holding Company
Omrania & Associates (O&A); Saudi Arabia
-
Emaar Economic City; Saudi
- Various Contractors
P a g e : 10
Contractor Value (US$ Million)
Status
Kuwait Arab 1,057
Construction
General Trading & Contracting;
597
Construction
Engineering &
Abdulmohsin Al
6,640
Construction
4,500
Design
Abdulla H. Al Mutawa Sons Group (AMSG);
1,325
Construction
Chase Perdana 550
Construction
7,000
Design
51,953
Construction
Coatings, Adhesives and Sealants in the GCCDecember 2012
Project Name
Country Client
Riyadh East Sub Center - Main File
Saudi Arabia Hamed & Ahmed Mohammed Al Mozainy Real Estate Co.
Makkah Gate Cultural Oasis
Saudi Arabia Al Balad Al Ameen Company for Urban Development; Makkah Municipality; Sumou Real Estate Company; Makkah Gate Company
South Obhur Project - Main File
Saudi Arabia Rayadah Investment Company
King Faisal University in Al Ihsa - Staff Accommodation - Phase 2
Saudi Arabia King Faisal University
Masdar City in Abu Dhabi
UAE Masdar (Abu Dhabi Future Energy Company)
Nebras Aviation City
UAE Strata
Ghantoot Green City - Main File
UAE International Capital Trading LLC
Coatings, Adhesives and Sealants in the GCC
www.constructarabia.com www.ventures-me.com
Client Consultant Contractor
Hamed & Ahmed Mohammed Al Mozainy Real Estate Co.
- -
Al Balad Al Ameen Company for Urban Development; Makkah Municipality; Sumou Real Estate Company; Makkah Gate Company
- -
Rayadah Investment Company
Sulaiman Al Khorashi Office
-
King Faisal University
Arch-Centre for Architecture & Engineering Consultant; Saudi
Al Arrab Contracting Company
Masdar (Abu Dhabi Future Energy Company)
Flack & Kurtz Consulting Engineers; ETA Ascon; Abu Dhabi; Transsolar; WSP Group; Abu Dhabi
Al Ahmadiah Contracting; Dubai; Hip Hing Contruction Hong Kong
- -
International Capital Trading LLC
KEO International Consultants; Abu Dhabi
-
P a g e : 11
Contractor Value (US$ Million)
Status
8,000
Tender for Construction Contract
10,000
Design
15,000
Design
Al Arrab 7,012
Construction
Al Ahmadiah
Dubai; Hip Hing Contruction -
22,000
Construction
10,000
Concept Stage
10,000
Design
Coatings, Adhesives and Sealants in the GCCDecember 2012
Project Name
Country Client
Danet Abu Dhabi
UAE Al Qudra Real Estate
Al Ghadeer at Saih As Sidirah
UAE Sorouh Real Estate
Khor Dubai UAE Dubai Culture and Arts Authority
Source: Ventures Onsite MENA Projects Database
Coatings, Adhesives and Sealants in the GCC
www.constructarabia.com www.ventures-me.com
Client Consultant Contractor
Al Qudra Real
Architectural & Engineering Consultants; Abu Dhabi (AEC); RSP (Raglan Squire and Partners) Architects
Various Contractors
Sorouh Real
Sun Jin Engineering (South Korea)
Construction General Contracting
Dubai Culture and Arts Authority
Kling Consult; Dubai
-
Source: Ventures Onsite MENA Projects Database www.venturesonsite.com
P a g e : 12
Contractor Value (US$ Million)
Status
9,260
Construction
5,400
Construction
1,907
Design
Recommended